Related
I used this tiny App since 5 years now, and just today I bought my x7510, the first thing I did was to install it on my device, but for my amazement, it installed correctly but DID NOT SHOW ON THE SCREEN AS IT DID BEFORE, the settings screen and menus are all messedup badly to the extent that I can't read any information.
the problem is VGA Screen of my device!
plz guys can you report if it working or not on your devices? this little app work wonders for our devices, give it a try please and let me know how to configure it to SHOW correctly on my devices' screen.
P.S.: I don't use any VGA Software like TrueVGA or any sort of these, the device is just Stock. brand new.
I downloaded the latrest version from the site of the developers of this app, but still, NO GO!
Will
please HELP! Please
XCPUScaler ver 3.03 has worked fine on my x7510. I don't have it loaded at this time as I reset the device to make hard SPL a clean install. When I attempt to reinstall I'll report back, however, I am waiting for Manila ver 20 to be released before I re-install all of my apps.
VGA is NO problem
As I reported in another post here, CXPUScalar works fine with VGA in PORTRAIT mode. in landscape mode there are scroll bars to use to access the areas that are offscreen.
On a side note, I uninstalled the app due to repeatable sound problems when running XCPUScalar. I would lose all sounds until I soft-reset the device. I tried with it scaling with overclocking to 663 and without overclocking and only going to 624 and also tried it without scaling and just hard setting at both 663 and 624. Unfortunately everytime I let the software run, both manual start and auto run, it would randomly kill my sound.
I uninstalled only XCPUScalar and have not had the problem resurface.
BTW, the only time I see any slowness is on the today screen drawing the plugins. Everything else works very quickly.
I have been running XCPUScalar since I bought mine. No problems at all upon running it at constant 624. I am using it with Real VGA, no sound problems either. It was the very first application I installed before adding any other apps.
Kasush said:
As I reported in another post here, CXPUScalar works fine with VGA in PORTRAIT mode. in landscape mode there are scroll bars to use to access the areas that are offscreen.
On a side note, I uninstalled the app due to repeatable sound problems when running XCPUScalar. I would lose all sounds until I soft-reset the device. I tried with it scaling with overclocking to 663 and without overclocking and only going to 624 and also tried it without scaling and just hard setting at both 663 and 624. Unfortunately everytime I let the software run, both manual start and auto run, it would randomly kill my sound.
I uninstalled only XCPUScalar and have not had the problem resurface.
BTW, the only time I see any slowness is on the today screen drawing the plugins. Everything else works very quickly.
Click to expand...
Click to collapse
I now fixed the problem by doing one thing:
Hard Reset.... and Cancelled the Customizations that follows a fresh hard reset by resetting the device before the 3 seconds count down.
Now.... it shows properly, but as you mentioned, sometimes I just Lose Sound until another soft reset.
thank you so much for the input..
one more thing:
I just feel the device is slow when going to Programs Menu and scrolling up and down using the stylus, it just takes some lags drawing the screen, I tried playing with cache settings using Schab Adv Config. but all are invain, I JUST DON'T NOTICE ANY IMPROVEMENTS AT ALL.
WHAT DO YOU NEED TO DO IN ORDER TO GIVE IT SMOOTHER MOTION?
VIDEOS PERFORMANCE USING CorePlayer 1.22 sucks too, we have ATI Acceleration chip and yet suffer all these! its just pain in the...
Did someone use it with WM 6.5.3?
a better question yet, did anyone try it on WM 7 yet?
I'm still on 6.1x i like it lean, and never had the time to cook my own custom ROM, one of these days i will.
running it all the time on 624, it works fine on 663, the only problem is it gets too hot after a while if i leave it on 663, probably why the OP has audio problem at higher speeds.
I always switch it back down to 624 when 663 is too hot, but i do up it to 663 when i go online, or watch video, to compensate for the lack of ATI driver support.
when i'm done i lower it back to 624, besides at 663 it sucks up too much battery, i always carry an extra battery with me in case i run out of juice, and not have any USB port nearby to refill.
Hi,
I use coreplayer 1.3.0 and switched ATI support on. When playing a 500 * 400 divx file the benchmark gives 140% playback speed so no problems here. I must say I fiddled a lot with the settings to get it working correctly. No use of CPUXSCALE but I use PocketHackMaster.
grx
My keyboard has been lagging and doing other strange things that has got me worried. I did a hard reset on it yesterday and before I even installed any software I was forced to use the on-screen board for a spell as the slide out was un-responsive. I chalked it up to some background process being a hog and moved on. Now I'm finding some consitencies.
On a fresh reboot if I open the notes app in landscape mode and start typing I can see the cursor moving but nothing else till I get about 75% across the screen and then there are some black artifacts that now look like a ton of characters all bunched up in the space of about 3 positions wide. If I keep typing till it does a return then the entire line of text shows up and the process repeats itself on the next line.
If I have a full page of text open in say Total commander's text editor in portrait mode and slide the keyboard out, it will make a pattern of those black artifacts diagonally down the screen toward the left side and it will not correct itself. If I go back to portrait mode all is well again. There is seriously something wrong here.
I can't find any information from searching on the problem but hoping one of the experts here could shed some light on it and let me know if it's time to think about a return. Will try to uncover more if I can.
Many Thanks,
Eidolen
I took some screens of the problem. Both pics on the bottom are the same document but left is with TC's editor and the right is Word. Upper right is word as well. Hopefullt the attachment makes it through, if not I can host and link to it.
If you are running a stock ROM without any customizations (you said you hard reset your device), then chances are you have a defective Fuze. You should exchange it through AT&T's 30 day return policy.
If you're not running a stock ROM, then maybe you have an unstable one. Flash Da_G's clean ROM and see if the issue still occurs. Since that ROM has very little installed by default, the chances of a software conflict are slim.
Please post back here with your status.
I was thinking the same thing but the one thing I can't reproduce is when the keyboard doesn't respond at all. Maybe the graphics and the responsiveness are 2 different things?? I'm wondering if clear-type might have something to do with the graphics but that shouldn't lag the keyboard.
Gonna disable Clear-type now and will report back.
Eidolen
Well if I would have done a search with cleartype I would have found my answer, sorry I didn't figure it out sooner. At least pople can see what cleartype looks like on the Fuze in landscape mode if they were wondering. Apparently there is no fix known other than to turn it off. Hopefully the laggy response clears up as well but not getting my hope up. Thanks for your response.
Eidolen
What an odd thing for ClearType to do in landscape mode... as for laggy response, flashing a clean ROM would give you a good gauge as to how preinstalled apps can affect such lag.
Same thing happens to me but in txt'in sometimes my keyboard dont work at all and i have to restart the device, but this has happen to me only 3 times and the keyboard still have life cuz when i hit the fn key or shift the light comes on indicating that i put them on. as for screen lag i bearly get screen lag, because i did some hack i saw in this thread and it seems to of help alittle
by the way am using the ROMeOS2, i was wondering if i was the only person with this problem but apperently not.
Yep I got the same problem. I installed the NullKb cab on my phone to keep the kb from popping up in Opera. It didn't work. I uninstalled NullKb, It still shows up as selectable under other input options. The lag got progressively worse and even resets will not get the keyboard to work.
I've got the same problem. It's really strange.
I used ROMeOS but now am back to Australian Three official rom.
It seems like, when ClearType is active, I can't see what I am writing with the keyboard in LandScape mode. Even stranger is that when you write an SMS, the keyboard writes fine as there is T9 active.
I really need a fix for this as this has started to frustrate me.
I found having "clear type" activated was my problem as well. I turn it off and my kb is back to usual normal. I have a euro stock unit. Very happy with the rest of it's performance. I can live without cleartype.
eidolen said:
My keyboard has been lagging and doing other strange things that has got me worried. I did a hard reset on it yesterday and before I even installed any software I was forced to use the on-screen board for a spell as the slide out was un-responsive. I chalked it up to some background process being a hog and moved on. Now I'm finding some consitencies.
On a fresh reboot if I open the notes app in landscape mode and start typing I can see the cursor moving but nothing else till I get about 75% across the screen and then there are some black artifacts that now look like a ton of characters all bunched up in the space of about 3 positions wide. If I keep typing till it does a return then the entire line of text shows up and the process repeats itself on the next line.
If I have a full page of text open in say Total commander's text editor in portrait mode and slide the keyboard out, it will make a pattern of those black artifacts diagonally down the screen toward the left side and it will not correct itself. If I go back to portrait mode all is well again. There is seriously something wrong here.
I can't find any information from searching on the problem but hoping one of the experts here could shed some light on it and let me know if it's time to think about a return. Will try to uncover more if I can.
Many Thanks,
Eidolen
Click to expand...
Click to collapse
Hi:
I had the same problems. I fixed it by disabling cleartype in landscape (using Diamond Tweaks), and then installing the Fuze Keyboard fix cab, which I am attaching here for you, in case you want to try it. I'm sorry I don't remember the original post I got it from. After doing these 2 things, everything seems to be working great for me.
Can anyone who has installed a custom android type rom let me know if the touchscreen is better once rooted and reflashed. I am talking about sensitivity at the store two different ones now both units are just bad when trying to select something I occasionally had to hit the selection more than 2 times.
I am also interested in if this changes. I read that its hit or miss whether or not thr screen works as intended or has problems, leaving me to believe its a production consistancy issue.
Some love it and some hate it.
Does this sound accurate?
Obsolete X said:
I am also interested in if this changes. I read that its hit or miss whether or not thr screen works as intended or has problems, leaving me to believe its a production consistancy issue.
Some love it and some hate it.
Does this sound accurate?
Click to expand...
Click to collapse
Sounds like it.
There's another thread about this which has a youtube video of one of the ones who said their's was bad and it certainly looked to be the case. In the video on the "home" "page" of the launcher when he swiped in the top half of the screen nothing happened most of the time, while it worked as expected in the bottom half. Mine behaves as expected wherever I swipe...
I'm not going to let on that it will be perfect, but when I moved to TnT Lite (I'm now on 2.2.1), I installed LauncherPro. Within LauncherPro, you can adjust the sensitivity and scroll settings that covers all the launched actions. Also, there's an entry you can add to the local.prop [go into adb shell and type: echo ro.HOME_APP_ADJ=1 >> /data/local.prop ] (requires r/w permissions to update). This change made it smoother (and quicker) to go from screen to screen.
There are still times where I press an icon and nothing happens for a second or so, but it rarely happens anymore with all the improvements that have been added to TnT Lite over the last couple of weeks.
I have had no touchscreen sensitivity issues to speak of with ZPad ROM. I am now running the VEGAn ROM which has really come together nicely in the last few days, and again the touchscreen is as sensitive in all places as I would expect it to be.
Any slowness/lag issues were resolved with the updated drivers that were discovered a week or two ago.
The stock TNT ROM has lots of software issues that are totally unrelated to the hardware. This is most likely one of them. I can't say for sure, since I wiped my unit within 5 minutes of opening the box and installed ZPad.
The touchscreen is still not as good with multitouch as it should be, which I believe is a driver issue, so pinch and zoom and similar multitouch action is not as smooth as it ought to be. But in general use, typing, swiping, scrolling, etc. I am just single-touching and everything works as smoothly and well as it does on my Nexus One phone.
Thanks to some testing by @alal690 based on my instructions in the post on how to play with touchscreen sensitivity we have some suggested reduced sensitivity values.
I spent entire day figuring how to do more things in android apps, and here's my next terrible UI attempt: NookTouchscreenSensitivityAdjuster-4.apk (backup link).
It's recommended that you run it with 07/11 cm10.1 release, but it will work with older releases too, just all settings (all but touch sensitivity on 07/06) would reset on screen off.
This minimalistic tool would allow you to change various touchscreen parameters in GUI, so not need to play with adb.
Right now this tool just lets you to play with values, the new values persist until the screen turns off (and the touchscreen resets restoring to default values).
The "save" button only saves the sensitivity and focus settings at this time, and the values persists across reboots (important to grant it root access the first time you run it!), everything else is not saved anywhere (since I am not sure there's any value in that and only included the other settings so you can experiment with them and perhaps get back to me with your awesome finds).
save button only works with 07/06 release, in previous releases save button does not persist anything.
the "reset" button resets values to the "old" values in the touchscreen, meaning pre-sensitivity change (so to 0x11, instead of the new 0x16).
Old post:
Anyway, here's a test zip that you can flash to try the new value. I encourage everybody to try it both if you do and do not feel like you have a touchscreen sensitivity issue.
If there are no downsides (so far I see none on my end), we might make this one to be a standard new default.
touchscreen-test.zip - this is for Nook HD+ (noop on the Nook HD). (Note, this is now included into 6/30 build for ovation)
Do not flash into stock, it'll break it.
I know the raw TS settings is a bit intimidating, so I plan to make an app for that, though that's a bit more effort than what I have time for ATM, so we'll make do with just this topical treatment.
will this work with carbonrom also? i like to switch between them.
What about those of us who felt it wasn't sensitive enough? Is there some sort of weird effect where its so over-sensitive that it feels less sensitive?
Apk07 said:
What about those of us who felt it wasn't sensitive enough? Is there some sort of weird effect where its so over-sensitive that it feels less sensitive?
Click to expand...
Click to collapse
Try it and tell me what you find out.
Feel free to play with other register values as per that other post referenced if you can. No two devices are totally the same. So we'll need a significant amount of testing by all interested parties to come to some middle groumd
Either that, or an app where people would be able to setup volume, touchscreen and other settings for themselves, but we'd still need to have sensible defaults.
bckrupps said:
will this work with carbonrom also? i like to switch between them.
Click to expand...
Click to collapse
It probably will work there too, but I did not test it on anything but my setup.
verygreen said:
It probably will work there too, but I did not test it on anything but my setup.
Click to expand...
Click to collapse
i tried it on both. What a difference already. especially on stock browser. sometimes i wanted to smash the thing lol. you are one hell of a dev. scrolling takes a bit more work but clicking links is so much better now. sometimes i would click a link four or 5 times lol
verygreen said:
Thanks to some testing by @alal690 based on my instructions in the post on how to play with touchscreen sensitivity we have some suggested reduced sensitivity values.
Anyway, here's a test zip that you can flash to try the new value. I encourage everybody to try it both if you do and do not feel like you have a touchscreen sensitivity issue.
Click to expand...
Click to collapse
Can I just flash this zip from CWM... or do I need to do any of the other steps mentioned in the post on playing with touchscreen?
dbrickg said:
Can I just flash this zip from CWM... or do I need to do any of the other steps mentioned in the post on playing with touchscreen?
Click to expand...
Click to collapse
You just flash this one from cwm and you are good to go for just this particular setting change.
verygreen said:
You just flash this one from cwm and you are good to go for just this particular setting change.
Click to expand...
Click to collapse
Thanks. That's what I thought. So I went ahead and did it while I was waiting for your response. So far it seems just fine. I guess I don't notice any great deal of difference. But I'm not sure what the symptoms were that you were trying to cure. I can't figure out how to read any of the context around the link to the post you mention in the OP
dbrickg said:
Thanks. That's what I thought. So I went ahead and did it while I was waiting for your response. So far it seems just fine. I guess I don't notice any great deal of difference. But I'm not sure what the symptoms were that you were trying to cure. I can't figure out how to read any of the context around the link to the post you mention in the OP
Click to expand...
Click to collapse
Basically the problem is: there are multiple complaints about people having too sensitive/too insensitive touchscreens. I don't think I am seeing anything like that, but there is more than one report so perhaps different people have different tolerances and different hardware has it's quirks.
The goal here is to arrive at a different set of defaults that would improve the situation for people that feel there is a problem and at the same time don't make situation worse for everybody else who feels current settings are ok.
verygreen said:
Basically the problem is: there are multiple complaints about people having too sensitive/too insensitive touchscreens. I don't think I am seeing anything like that, but there is more than one report so perhaps different people have different tolerances and different hardware has it's quirks.
The goal here is to arrive at a different set of defaults that would improve the situation for people that feel there is a problem and at the same time don't make situation worse for everybody else who feels current settings are ok.
Click to expand...
Click to collapse
mine personally was very insensitive. when i'm on slickdeals and i know you are also or bleacher report clicking on links such as hot deals and my subscriptions would take multiple tries. i didn't notice much system wide but mostly on the internet clicking smaller links. whatever he did with this zip made mine personally much much better.
verygreen said:
Basically the problem is: there are multiple complaints about people having too sensitive/too insensitive touchscreens. I don't think I am seeing anything like that, but there is more than one report so perhaps different people have different tolerances and different hardware has it's quirks.
Click to expand...
Click to collapse
Aha... then I guess I *did* know about the problem. I noticed it most when reading books. After a few minutes, the page turning touches on the lower right margin would seem to stop. I finally just gave up even trying to use them, and substituted a swiping movement. Anyway, with this zip installed, the sensitivity doesn't seem to be any worse, and might well be better. It hasn't been very long, but I'll keep an eye open for differences.
PS: Just read some of the other people's posts, and see that they were complaining of difficulty in clicking links in web pages. I had certainly noticed that, but hadn't even thought of the possibility of fixing it, so had just ignored it. With this new zip, it does seem like web link sensitivity is much improved.
dbrickg said:
Aha... then I guess I *did* know about the problem. I noticed it most when reading books. After a few minutes, the page turning touches on the lower right margin would seem to stop. I finally just gave up even trying to use them, and substituted a swiping movement. Anyway, with this zip installed, the sensitivity doesn't seem to be any worse, and might well be better. It hasn't been very long, but I'll keep an eye open for differences.
PS: Just read some of the other people's posts, and see that they were complaining of difficulty in clicking links in web pages. I had certainly noticed that, but hadn't even thought of the possibility of fixing it, so had just ignored it. With this new zip, it does seem like web link sensitivity is much improved.
Click to expand...
Click to collapse
mine is much improved. whatever adjustments were made I feel like mine could go even a little more in that direction. I'm at like 85% now lol
Thanks, alal690! I think he deserves to get some "Thanks", too, but he doesn't have any posts! And thanks to verygreen for providing the tools for alal690 to tweak with, of course!
I have noticed more mistypes on the keyboard verygreen if you are still needing input but the positives outweigh that in my book. it really is much better on websites. please thank the other dev that worked on this also alal690.
Big improvement for me, thanks I suspect the issue with pressing ui elements was caused by jitter and phantom touches that may have been caused by oversensitivity even though it seems somewhat counterintuitive... Selecting text was the big issue for me and it's now vastly improved. As has my accuracy on they keyboard - normally I'd have had to retype half of a post this length
BTW, it woul be great if people with some sort of a protective film over the touchscreen will give this a try to make sure it's also ok for them (I know those screen protectors are really popular amongst some people).
I've spent the last week trying to fix this, but it looks like it could be a problem with a driver or the actual hardware itself. If you go to Dev tools, then Pointer Location, you can see the reported values for touch pressure and size. When holding down my finger anywhere on the top 2/3 of my screen, the xy and size values jitter like crazy. If I touch the bottom 1/3 of my screen, there is no jittering and the size value is constant.
I think people that are complaining about low sensitivity are mistaken. I think the touch screen response is actually too sensitive, thus causing the jitter and making it hard to click on hyperlinks.
Reducing the touch sensitivity scale and increasing the touch size in the IDC file has helped a lot, but the jitter is still a problem that I hope someone can figure out how to fix.
Sent from my BN NookHD+ using Tapatalk 4 Beta
phammichael said:
I've spent the last week trying to fix this, but it looks like it could be a problem with a driver or the actual hardware itself. If you go to Dev tools, then Pointer Location, you can see the reported values for touch pressure and size. When holding down my finger anywhere on the top 2/3 of my screen, the xy and size values jitter like crazy. If I touch the bottom 1/3 of my screen, there is no jittering and the size value is constant.
I think people that are complaining about low sensitivity are mistaken. I think the touch screen response is actually too sensitive, thus causing the jitter and making it hard to click on hyperlinks.
Reducing the touch sensitivity scale and increasing the touch size in the IDC file has helped a lot, but the jitter is still a problem that I hope someone can figure out how to fix.
Sent from my BN NookHD+ using Tapatalk 4 Beta
Click to expand...
Click to collapse
I agree with phammichael that the real issue here would be jittering, but my symptom is different.
This is what I found so far.
- Pinch out to zoom in something (in gallery or web browser) and hold the 2 fingers on the screen.
- If my fingers are on the right side of the screen surface (portrait mode), the screen jitters. You can see the touch values changing fast and continuously by tiny values.
- If my fingers are on the left side of the screen surface, the screen won't jitter and stay calm.
Am I the only one experiencing this issue?
BTW, this is before I applied verygreen's touch screen patch. I will report back after applying it.
pins2u said:
I agree with phammichael that the real issue here would be jittering, but my symptom is different.
This is what I found so far.
- Pinch out to zoom in something (in gallery or web browser) and hold the 2 fingers on the screen.
- If my fingers are on the right side of the screen surface (portrait mode), the screen jitters. You can see the touch values changing fast and continuously by tiny values.
- If my fingers are on the left side of the screen surface, the screen won't jitter and stay calm.
Am I the only one experiencing this issue?
BTW, this is before I applied verygreen's touch screen patch. I will report back after applying it.
Click to expand...
Click to collapse
The jittery right hand side of the screen in portrait mode is the problem - I have this on my HD+ (which was new) and my Dad has it on his (which was new) as does my friend (again a new unit)
There have also been lots of others reporting the same thing on here.
Put the HD+ into landscape mode and the issue disappears.
I've just applied verygreen's 'fix' zip and I have to say that touch response is loads better - clicking links etc works far more reliably (but right hand side of the screen in portrait mode jitters still exist)
Great work as usual verygreen
Hi there,
I just received my new Mi MIX 2S (actually, I got it 360 hours ago, if you know what I mean...) and I'm very satisfied with this toy
I'm on the last MIUI 10 Global Beta (8.7.5) since this afternoon, with SuperSU v2.82-SR5 and of course, with an unlocked bootloader.
However, I noticed a "strange" glitch/issue when I quick touching/typing.
It's seems that the screen not considering the different touch but acts like it does "two in one" touch.
I made a small video to illustrate the issue :
https://youtu.be/NdW8Zeo1MLQ
Does anyone has this too ?
Do you think it's an hardware or a software issue (like calibrate or touch-delay update) ?
Thanks
lafritte57 said:
Hi there,
I just received my new Mi MIX 2S (actually, I got it 360 hours ago, if you know what I mean...) and I'm very satisfied with this toy
I'm on the last MIUI 10 Global Beta (8.7.5) since this afternoon, with SuperSU v2.82-SR5 and of course, with an unlocked bootloader.
However, I noticed a "strange" glitch/issue when I quick touching/typing.
It's seems that the screen not considering the different touch but acts like it does "two in one" touch.
I made a small video to illustrate the issue :
https://youtu.be/NdW8Zeo1MLQ
Does anyone has this too ?
Do you think it's an hardware or a software issue (like calibrate or touch-delay update) ?
Thanks
Click to expand...
Click to collapse
Hardware issue, I have the same issue.
https://forum.xda-developers.com/xiaomi-mi-mix-2s/help/miui-im-swiping-t3803874
Damn... I bought mine on Joybuy, I'll try to deal with them about the warranty because I guess I can't contact Xiaomi directly.
The XDA Gesture workaround seems to be a good temporary way but, I really don't want to stay on a defective device...
I already did this with my Oneplus One (as a early buyer, I got a similar issue) and it was worst with time, I regret to had never return them
lafritte57 said:
Damn... I bought mine on Joybuy, I'll try to deal with them about the warranty because I guess I can't contact Xiaomi directly.
The XDA Gesture workaround seems to be a good temporary way but, I really don't want to stay on a defective device...
I already did this with my Oneplus One (as a early buyer, I got a similar issue) and it was worst with time, I regret to had never return them
Click to expand...
Click to collapse
Bought mine on Aliexpress, no way I'll get a warranty without me paying $30 of shipping and lose a month without the phone.
I tried the XDA gesture thing, but you can't really get the same gestures as on MIUI (alsway have to make the gestures from the bottom of the phone it seems). So for now I'm just using it with this "bug", with the keyboard closing from time to time when I type.
Probably gonna get a Mi Max 3 to replace it anyway sooner or later.
I just made the thest you did with a drawing app and I got the same results when I multi touched the screen very quickly. I hadn't noticed this earlier because it didn't cause any problem for my daily use. Specifically, in which context did you notice that issue?
hayatesan said:
Bought mine on Aliexpress, no way I'll get a warranty without me paying $30 of shipping and lose a month without the phone.
I tried the XDA gesture thing, but you can't really get the same gestures as on MIUI (alsway have to make the gestures from the bottom of the phone it seems). So for now I'm just using it with this "bug", with the keyboard closing from time to time when I type.
Probably gonna get a Mi Max 3 to replace it anyway sooner or later.
Click to expand...
Click to collapse
I guess JoyBuy has the same warranty policy, which means cost return and more than a month without phone...
I haven't tried the XDA Gesture workaround yet, but I'm not too happy about losing the MIUI gesture
Hope that's JoyBuy will be understanding...
rodaven said:
I just made the thest you did with a drawing app and I got the same results when I multi touched the screen very quickly. I hadn't noticed this earlier because it didn't cause any problem for my daily use. Specifically, in which context did you notice that issue?
Click to expand...
Click to collapse
Thanks for your test and your answer.
In my case, it's very annoying when I (fast) typing a message, it causes a "fake" swipe and recude the keyboard or go back to home screen. I'll try to make a better screencast to show you in-use case.
lafritte57 said:
I guess JoyBuy has the same warranty policy, which means cost return and more than a month without phone...
I haven't tried the XDA Gesture workaround yet, but I'm not too happy about losing the MIUI gesture
Hope that's JoyBuy will be understanding...
Thanks for your test and your answer.
In my case, it's very annoying when I (fast) typing a message, it causes a "fake" swipe and recude the keyboard or go back to home screen. I'll try to make a better screencast to show you in-use case.
Click to expand...
Click to collapse
Fine, I'll tell you my experience. I use to had the same problem, it's only noticeable using the keyboard and specially when you tap the letters located near the edge of the screen, specially like the Q and P. I'm almost completely sure that the problem is related to gestures, because the system thinks you're swiping, in my case I got some lag too in addition to the false back gesture. What I did to fix this is use the keyboard (Google keyboard) in one hand mode (long press the "," and this option will pop up next to the emoticon) and moving it to the center and the problem is gone. It's actually more comfortable this way because the space bar moves up and it's more accessible. You can play then with the keyboard size if you think it's too small. There are two others threads talking about the same problem and I recommended this solution in both, and it seems to work for others too. Try it and tell us.
https://forum.xda-developers.com/showpost.php?p=76789600&postcount=13
I have this issue too, are you sure it's a hardware problem and it does not affect everybody?
Thank you.
stark0 said:
I have this issue too, are you sure it's a hardware problem and it does not affect everybody?
Thank you.
Click to expand...
Click to collapse
Hi,
Actually, I think it's more an OS issue than an hardware one.
After some tries and research, I noticed that these "screen glitches" are bad interpretations of fast multitouching, translate into swipe/gesture.
These swipe/gesture come with the gesture navigation mode, included in full-screen desplay (and which allow to hide the bottom navigation bar).
If you re-enable the "classic" display, with the bottom bar, the issue doesn't seem to exist. So, I guess for MIUI, some fast-typing/touching are interpreted as gestures (swipe down-to-up = home, left-to-right = previous...)
In the same registry, I noticed that, if you use a scrollable widget (Google Agenda in planning display) and if you scroll down on it (in order to see the bottom lines for example), MIUI interpret it as a down-to-up gesture (and so, go back to home, or search).
So, I really hope that in a future update, the sensibility of these gestures could be decreased/improved...
For now, you could :
Enable the one-hand mode ok Google Keyboard as proposed by @rodaven (but personnaly, I dislike the fact to have a small keyboard with a lot of lost space around it...)
Disable the full sceen display mode (and so, say goodbye to the gestures feature)
Stay on full screen mode and gestures, get upset when you write a message and pray for un update
lafritte57 said:
Hi,
Actually, I think it's more an OS issue than an hardware one.
After some tries and research, I noticed that these "screen glitches" are bad interpretations of fast multitouching, translate into swipe/gesture.
These swipe/gesture come with the gesture navigation mode, included in full-screen desplay (and which allow to hide the bottom navigation bar).
If you re-enable the "classic" display, with the bottom bar, the issue doesn't seem to exist. So, I guess for MIUI, some fast-typing/touching are interpreted as gestures (swipe down-to-up = home, left-to-right = previous...)
In the same registry, I noticed that, if you use a scrollable widget (Google Agenda in planning display) and if you scroll down on it (in order to see the bottom lines for example), MIUI interpret it as a down-to-up gesture (and so, go back to home, or search).
So, I really hope that in a future update, the sensibility of these gestures could be decreased/improved...
For now, you could :
Enable the one-hand mode ok Google Keyboard as proposed by @rodaven (but personnaly, I dislike the fact to have a small keyboard with a lot of lost space around it...)
Disable the full sceen display mode (and so, say goodbye to the gestures feature)
Stay on full screen mode and gestures, get upset when you write a message and pray for un update
Click to expand...
Click to collapse
Thank you so much!
I have the gestures disabled because of that but it still happens in the keyboard (I don't like the one-hand mode). So, we need to wait hoping it'll be solved.
stark0 said:
Thank you so much!
I have the gestures disabled because of that but it still happens in the keyboard (I don't like the one-hand mode). So, we need to wait hoping it'll be solved.
Click to expand...
Click to collapse
I just found that this issue was submit on MIUI website in January : http://en.miui.com/thread-1539964-1-1.html
lafritte57 said:
I just found that this issue was submit on MIUI website in January : http://en.miui.com/thread-1539964-1-1.html
Click to expand...
Click to collapse
But that's different from the multitouch issue that is in the main post (https://www.youtube.com/watch?v=NdW8Zeo1MLQ&feature=youtu.be), isn't it?
stark0 said:
But that's different from the multitouch issue that is in the main post (https://www.youtube.com/watch?v=NdW8Zeo1MLQ&feature=youtu.be), isn't it?
Click to expand...
Click to collapse
In my opinion, it's the same issue.
Due to the full screen/gesture feature, fast multitouches are interpreted as a gesture.
On my video, you could see it.
On the issue from MIUI website, users asked that swipe/gesture are disable over keyboard when it's on-screen.
I think it should be a solution to combine gesture navigation and fast multitouch/type.
Personnaly, I disable full screen/gesture navigation (for now, sadly) and the issue desappear, that's why I'm pretty sure it's a software issue (which concern very model with this feature).
I changed my screen
Actually i cracked my screen and replaced new lcd from aliexpress claimed original. I checked it is JDI. But the touch issues still persist. I think its xiaomi driver.. or i dont know.. i really regret having this phone
lafritte57 said:
In my opinion, it's the same issue.
Due to the full screen/gesture feature, fast multitouches are interpreted as a gesture.
On my video, you could see it.
On the issue from MIUI website, users asked that swipe/gesture are disable over keyboard when it's on-screen.
I think it should be a solution to combine gesture navigation and fast multitouch/type.
Personnaly, I disable full screen/gesture navigation (for now, sadly) and the issue desappear, that's why I'm pretty sure it's a software issue (which concern very model with this feature).
Click to expand...
Click to collapse
I tested more, disabling fulls creen gestures and the problem persist. There is a video with the keyboard trying to type "alguna", sometimes it makes a gesture "left to right":
https://www.youtube.com/watch?v=N8EgUfaN5C0
It's very disapointing, I had touch screen problems with my oneplus one and now with the mix 2s.