Hi.
Yesterday i finally got root my Pocket Plus using the UnlockRoot Pro
v4.1 free version.
Now i have root acess and using the stock rom (ICS 4.0.4) which came with the device.
The bad news are: you have to accept install an unwanted "SweetIm toolbar" on the PC, and one "battery save charge" apk int the smartphone, but i can uninstall both after the root...
Maybe someone have interest and test this tool too...
Be carefull. I have test the root acess only with Root Explorer and Root Uninstaller Pro, and both works fine, but Triangle Away don't recognize my device yet.
bysch
OK guys, so I finally found a working root for my Verizon Note 3 that had MJE pre-installed. On top of that, it didn't trip Knox either! There's a Chinese rooting program called "VROOT" that you need which the most simple routing method I've seen even with a portion of the program in Chinese. Just install the program on a Windows computer, correct your device, wait for the root button to enable then click on"Root". There is an English version here: mgyun.com/en/getvroot*. The English version still has some Chinese though but I was able to navigate and successfully root the 1st try. One other caveat, the program installs a Chinese version of SuperSU so you'll need to manually download the English version from the play store and during the first boot of the English version of supersu it gives you the option to uninstall the Chinese version. Hit yes to uninstall the Chinese version then full reboot and the English version will run. I verified through rootchecker, titanium backup and obviously all the root restricted programs I've installed since. Also, make sure you have developer options turned on (enable it by tapping on the build number in Settings>About Phone 7 times) then USB debugging enabled, install from unknown sources enabled in Settings>Security and unchecked verify apps in the same directory. Vroot also installs a Chinese version of an app store...not sure if it's goo manager or some other app because it's in Chinese. I haven't uninstalled it yet as I'm not sure if I need it for the root.
I hope this helps any of the frustrated Verizon users that just bought the note 3 with MJE pre-installed.
Sent from my SM-P600 using XDA Premium 4 mobile app
Is vroot safe? Are there alternatives to vroot for MJE? Is there a timetable documenting firmware version by date? For instance, is MJE more recent than MJ3? If so, can an MJE build be downgraded?
At the time, VRoot was for obtaining information about your phone and sending Chinese servers.
Not too sure what the is now but it's advised that should it caution or just don't use it at all even even though it does provide a way to root.
Someone help me to root this brand-new smartphone, i tryed framaroot, kingo root and mtk droid root but with no sucess... Someone help me please
M3tt said:
Someone help me to root this brand-new smartphone, i tryed framaroot, kingo root and mtk droid root but with no sucess... Someone help me please
Click to expand...
Click to collapse
i looked around for some suggestions that might work, but sorry, i cant find any.
M3tt said:
Someone help me to root this brand-new smartphone, i tryed framaroot, kingo root and mtk droid root but with no sucess... Someone help me please
Click to expand...
Click to collapse
Just picked up a Neo 4.5 as a gift for someone today. Rooted & installed SuperSU binary & App w/ Framaroot v1.9.4. Maybe the version you tried didn't have the correct strings for the MT6572 yet. I believe it worked with Boramir.
i need root too
Need4Sneed said:
Just picked up a Neo 4.5 as a gift for someone today. Rooted & installed SuperSU binary & App w/ Framaroot v1.9.4. Maybe the version you tried didn't have the correct strings for the MT6572 yet. I believe it worked with Boramir.
Click to expand...
Click to collapse
I try but not work.
Can someone give me some advice or point me in the right direction please
M3tt said:
Someone help me to root this brand-new smartphone, i tryed framaroot, kingo root and mtk droid root but with no sucess... Someone help me please
Click to expand...
Click to collapse
Hi sir its been four months, did you find a way to root your blu neo 4.5? i desire to also, thanks in advance.
I'm also looking for help
Need4Sneed said:
Just picked up a Neo 4.5 as a gift for someone today. Rooted & installed SuperSU binary & App w/ Framaroot v1.9.4. Maybe the version you tried didn't have the correct strings for the MT6572 yet. I believe it worked with Boramir.
Click to expand...
Click to collapse
Could u possibly do a step by step walk through. That would really help .
Kingo Root instructions
mar_sm said:
Could u possibly do a step by step walk through. That would really help .
Click to expand...
Click to collapse
I´'ve rooted several BLUs with Kingo Root (just Google search for it and install it on your laptop). The challenge if you are a noobie is that sometimes you miss a step OR people assume that you know the basics, so they forget to tell you about some important steps that you must take before you root.
Instructions:
1. Install Kingo Root.
2. On your BLU, open Settings (make sure you have allowed applications to be installed from Unknown Sources...you'll find this option under Security in the Settings)..
3. In Settings, go to About Phone and rapidly click on the "Build Number" as many times as it takes to say, "You are now a developer". This will open a new option in the Settings called Developer Options.
4. In Settings, now go to Developer Options and make sure it is ON and also turn on the USB Debugging. VERY IMPORTANT!
5. Now connect your BLU to your computer via a USB cable and wait till all the drivers are installed and the device is READY TO USE.
6. Disconnect your phone from the computer.
7. Run the Kingo Root software.
8. Connect your phone to the computer (Kingo will eventually connect to the phone and then will show you a big ROOT button.
9. Click the big ROOT button and sit back till it does its thing.
10. Wait till Kingo gives you the "ROOTED!" message and then you are done (so go ahead and unplug your phone from USB and close Kingo Root software).
11. Reboot your phone and confirm root (download Busy Box Checker from Play Store). You might also want to download Busy Box X and install the busybox binaries..
OPTIONAL SUPERUSER:
You don't have to do this next part if you're happy with Kingo User.
Note that these days, Kingo Root will install a superuser (su) binary that is controlled by their own app called Kingo User instead of the SuperSU app. If you want SuperSU by Chainfire, you have to search XDA for BETA SuperSU 2.49. You'll find a zip file with a beta version of SuperSU and a script that will eliminate Kingo User and replace it with SuperSU.
Install BUSY BOX X on your phone (download from Play Store).
Place the SuperSU v2.49 zip on your SD card in the phone (IT MUST BE THE VERSION 2.49 NOT THE OFFICIL 2.46 OR THIS IS NOT GOING TO WORK). Then boot into recovery (to do that you turn your phone off and then after it is off, you restart it with the power button while you are holding down the volume UP button). Then you use the menu you find there to "Install a zip from SD card". Select the zip you just put on the SD card, and it will flash the SuperSU program and binaries to your phone, while deleting the Kingo User app and it's binaries. Now select Reboot System at the top of the menu and you're all done.
Need4Sneed said:
Just picked up a Neo 4.5 as a gift for someone today. Rooted & installed SuperSU binary & App w/ Framaroot v1.9.4. Maybe the version you tried didn't have the correct strings for the MT6572 yet. I believe it worked with Boramir.
Click to expand...
Click to collapse
Any chance you could PM me or mirror the 1.9.4 apk? I can't find it from a reliable resource online, and 1.9.3 did not root my new Neo 4.5. Tried several other rooting tools, none of which worked, so I'd love to be able to get my hands on the apk you used to do the root.
Thanks!
CVAngelo said:
I´'ve rooted several BLUs with Kingo Root (just Google search for it and install it on your laptop). The challenge if you are a noobie is that sometimes you miss a step OR people assume that you know the basics, so they forget to tell you about some important steps that you must take before you root.
Instructions:
1. Install Kingo Root.
2. On your BLU, open Settings (make sure you have allowed applications to be installed from Unknown Sources...you'll find this option under Security in the Settings)..
3. In Settings, go to About Phone and rapidly click on the "Build Number" as many times as it takes to say, "You are now a developer". This will open a new option in the Settings called Developer Options.
4. In Settings, now go to Developer Options and make sure it is ON and also turn on the USB Debugging. VERY IMPORTANT!
5. Now connect your BLU to your computer via a USB cable and wait till all the drivers are installed and the device is READY TO USE.
6. Disconnect your phone from the computer.
7. Run the Kingo Root software.
8. Connect your phone to the computer (Kingo will eventually connect to the phone and then will show you a big ROOT button.
9. Click the big ROOT button and sit back till it does its thing.
10. Wait till Kingo gives you the "ROOTED!" message and then you are done (so go ahead and unplug your phone from USB and close Kingo Root software).
11. Reboot your phone and confirm root (download Busy Box Checker from Play Store). You might also want to download Busy Box X and install the busybox binaries..
OPTIONAL SUPERUSER:
You don't have to do this next part if you're happy with Kingo User.
Note that these days, Kingo Root will install a superuser (su) binary that is controlled by their own app called Kingo User instead of the SuperSU app. If you want SuperSU by Chainfire, you have to search XDA for BETA SuperSU 2.49. You'll find a zip file with a beta version of SuperSU and a script that will eliminate Kingo User and replace it with SuperSU.
Install BUSY BOX X on your phone (download from Play Store).
Place the SuperSU v2.49 zip on your SD card in the phone (IT MUST BE THE VERSION 2.49 NOT THE OFFICIL 2.46 OR THIS IS NOT GOING TO WORK). Then boot into recovery (to do that you turn your phone off and then after it is off, you restart it with the power button while you are holding down the volume UP button). Then you use the menu you find there to "Install a zip from SD card". Select the zip you just put on the SD card, and it will flash the SuperSU program and binaries to your phone, while deleting the Kingo User app and it's binaries. Now select Reboot System at the top of the menu and you're all done.
Click to expand...
Click to collapse
I've tried Kingo Root, One Click Root, iRoot, towelroot, framaroot.... I tried lots of rooting methods
... Watched a lot of YouTube videos. I saw one in Spanish and the neo 4.5 is rooted, but I don't understand, and I'm sure its just a show n not a tutorial on how to root... Any help?
CVAngelo said:
I´'ve rooted several BLUs with Kingo Root (just Google search for it and install it on your laptop). The challenge if you are a noobie is that sometimes you miss a step OR people assume that you know the basics, so they forget to tell you about some important steps that you must take before you root.
Instructions:
1. Install Kingo Root.
2. On your BLU, open Settings (make sure you have allowed applications to be installed from Unknown Sources...you'll find this option under Security in the Settings)..
3. In Settings, go to About Phone and rapidly click on the "Build Number" as many times as it takes to say, "You are now a developer". This will open a new option in the Settings called Developer Options.
4. In Settings, now go to Developer Options and make sure it is ON and also turn on the USB Debugging. VERY IMPORTANT!
5. Now connect your BLU to your computer via a USB cable and wait till all the drivers are installed and the device is READY TO USE.
6. Disconnect your phone from the computer.
7. Run the Kingo Root software.
8. Connect your phone to the computer (Kingo will eventually connect to the phone and then will show you a big ROOT button.
9. Click the big ROOT button and sit back till it does its thing.
10. Wait till Kingo gives you the "ROOTED!" message and then you are done (so go ahead and unplug your phone from USB and close Kingo Root software).
11. Reboot your phone and confirm root (download Busy Box Checker from Play Store). You might also want to download Busy Box X and install the busybox binaries..
OPTIONAL SUPERUSER:
You don't have to do this next part if you're happy with Kingo User.
Note that these days, Kingo Root will install a superuser (su) binary that is controlled by their own app called Kingo User instead of the SuperSU app. If you want SuperSU by Chainfire, you have to search XDA for BETA SuperSU 2.49. You'll find a zip file with a beta version of SuperSU and a script that will eliminate Kingo User and replace it with SuperSU.
Install BUSY BOX X on your phone (download from Play Store).
Place the SuperSU v2.49 zip on your SD card in the phone (IT MUST BE THE VERSION 2.49 NOT THE OFFICIL 2.46 OR THIS IS NOT GOING TO WORK). Then boot into recovery (to do that you turn your phone off and then after it is off, you restart it with the power button while you are holding down the volume UP button). Then you use the menu you find there to "Install a zip from SD card". Select the zip you just put on the SD card, and it will flash the SuperSU program and binaries to your phone, while deleting the Kingo User app and it's binaries. Now select Reboot System at the top of the menu and you're all done.
Click to expand...
Click to collapse
I've attached a photo of my device info. Currently the device is locked to GT&T.
AgentNash said:
I've attached a photo of my device info. Currently the device is locked to GT&T.
Click to expand...
Click to collapse
I really hope that someone can show me how to root this phone
Stone Fist said:
I really hope that someone can show me how to root this phone
Click to expand...
Click to collapse
You still have not rooted your Neo 4.5? Can you give us a little more information? Respond to the following questions:
1. Have you turned on Developer Options on the phone?
2. Have you turned on USB Debugging in the Developer Options?
3. Have you installed the USB drivers for your phone?
4. Download and run MTK Droid Tools (as administrator). Just Google it and you will find lots of sources for the software (including here on XDA). Then connect your phone via USB cable. What message is shown on the bottom left corner of the MTK Droid window? Take a screenshot of your computer screen if possible and post it here.
Once you've answered these questions, we'll be able to help you.
Angelo
It is done
i root it
You have to use the latest version of Kingo root apk. and install it on your phone
Make sure u have the usual Debug mode on and to allow unknown apps ......it is simple and easy
try 360 Roo
Hi, for everyone trying to root blu neo 4.5, I have recently got my phone rooted and had tried all the other root apps out there, but the one that did the job is 360 Root, you can download it from google play store or just google it online and download. you should watch the video on youtube also, it's not in English but will still help you to understand the step by step process.
---------- Post added at 04:36 PM ---------- Previous post was at 04:30 PM ----------
drmarc said:
Hi, for everyone trying to root blu neo 4.5, I have recently got my phone rooted and had tried all the other root apps out there, but the one that did the job is 360 Root, you can download it from google play store or just google it online and download. you should watch the video on youtube also, it's not in English but will still help you to understand the step by step process.
Click to expand...
Click to collapse
so I've got my blu neo 4.5 rooted but there is no custom ROMs online to download, especially lollipop. if anyone knows where I can get custom Rom for blu neo 4.5 please let me know.
I was able to root my Blu Neo 4.5 with KINGROOT
http://forum.xda-developers.com/android/apps-games/one-click-root-tool-android-2-x-5-0-t3107461
Lol. I rooted my phone with 360 root. A Chinese app and soon after the phone died because of a faulty charger.
I've been following this guide and well here are the steps.
"1) To get started, download Framaroot application and install it on your Lenovo IdeaTab. Once done, you will see the Framaroot app in the app’s menu in your device.
2) Once installed, open the Framaroot app and tap on any of the three root exploit options listed in the main screen: Boromir, Barahir or Faramir for the installation of “SuperSu” app.
3) Once you have tapped on any of the root exploit options, the rooting process will get started and in a while you will see “Success! Superuser and su binary installed” message. Now the Framaroot app will ask for rebooting your device. Just do it.
4) After rebooting, your device will show the “SuperSU” app in the app’s menu which confirms the rooting process is successfully finished.
That’s it. Now you have successfully finished rooting your Lenovo IdeaTab S6000 Android Tablet. If you have followed this tutorial and successfully rooted your Lenovo tablet, help spread the buzz by sharing this tutorial on popular social networking websites."
I've made it to step 3 but I'm stuck there. Once Framaroot told me to reboot, I wasn't sure how to. If that's just turning it off and on then I tried that and once I made it to the app menu I couldn't find the "SuperSU" app. I also tried a factory reset. That didn't work, so I downloaded Framaroot again and now I'm just on step 3, trying to make SuperSU appear. I know for a fact I have the right tablet. My Model Number - IdealTab S6000-F. Can anyone help me?
Hi
Thanks for writing to us at XDA Assist. The best idea is probably to ask your question in the thread that contains the guide that you're using.
No response in two days, thread closed.
.
After all, I have succeeded in ROOTing my Hisense Sero 5 (HS-L691), here are the instructions how you (hopefully, if successful, please write feedback/say thanks ) can (hopefully all) ROOT your Hisense Smartphones & Tablets.
You will need:
• Kingroot in the latest version (currently I have installed 4.6.0).
Official Homepage: www[dot]kingroot[dot]net
[If you want to try it instead with Towelroot, Framaroot or similar, please post here, if it was or wasn't successful. Thanks! ]
1) Start Kingroot and wait until your smartphone model and "Root access is not available" appears.
2) Go (via the notification bar) to Settings -> Device: Apps -> Manage applications -> All.
3) Look at the end of the Apps list for the App with Chinese characters and a lock as an App icon (see screenshot).
4) Click "Force stop" and confirm the warning message with OK.
5) Switch (on the most recently used apps, home button double tap) to Kingroot and press the "TRY TO ROOT" button.
6) Wait until Kingroot reports the success (and share it with others, if you want. )
7) Now you can install Busybox, the modified Play Store, Lucky Patcher etc. (or for what ever you need ROOT. ) and enjoy yourselves life and possibilities of your Hisense Smartphones and/or Tablet.
Best wishes
Screenshot: www[dot]postimg[dot]org/image/jxvbbusxf/
Hisense F30 unable to root
Hi guys,
requesting your help in findings the ways to root Hisense F30 so that Play Store can be installed.
I have tried pretty much everything, from Kingroot to Framaroot to no success.
Any ideas?
same here with hisense f23,there is no easy way to root this model except modifiy the rom then flash it then root.
Is there no easier way to do this with adb..etc