Related
I am on a Verizon Razr Maxx HD (xt926). This all started when I decided to cleanly flash the newest version of CM10.2. I had been running it before. I wanted to start from a blank slate, so I went into TWRP and did the format wipe. Installed the newest CM10.2 nightly and gapps. This went fine and I booted into the ROM and started recovering all of my stuff. I installed F-droid and AdAway, and rebooted for that. The phone never got past the Bootloader Unlocked warning screen. I turned it off and went into TWRP to try some things. I tried to fix permissions, but it failed, referencing something to do with fdroid. I wiped again and reinstalled CM, but I still couldn't get past the Bootloader Unlocked warning.
I booted into TWRP again and wiped what I could, and accidentally wiped my external SD, and I had no card readers lying around to get the ROM zips back onto it. I downloaded the Razr HD utility, used the batch file, and tried to flash the stock rom through fastboot, but it got stuck in some kind of loop and would not flash correctly. I then tried to do it manually, but got some sort of buffer error. I tried again, and it started ok but I never saw it actually finish flashing.
By this time I finagled the ROM zips onto the SD card and stopped the fastboot and booted into TWRP. I did another set of wipes, and rebooted into TWRP again. I flashed the CM and Gapps. The ROM booted fine from TWRP and I was able to start setting up my account again. I tried rebooting after the initial setup just to see if it was working correctly, and was met with the fastboot screen with fastboot reason: Flash failed. I rebooted into TWRP from there, and tried to boot normally, but it still brought me to the fastboot. I went to the boot menu and tried the normal boot selection, and now my phone is stuck on the Bootloader Warning screen and now it won't even turn off when I hold the power button.
I have no idea what is going on, or why I could get to the working ROM once but not again. Does anyone know anything that could help me?
Kopiok said:
I am on a Verizon Razr Maxx HD (xt926). This all started when I decided to cleanly flash the newest version of CM10.2. I had been running it before. I wanted to start from a blank slate, so I went into TWRP and did the format wipe. Installed the newest CM10.2 nightly and gapps. This went fine and I booted into the ROM and started recovering all of my stuff. I installed F-droid and AdAway, and rebooted for that. The phone never got past the Bootloader Unlocked warning screen. I turned it off and went into TWRP to try some things. I tried to fix permissions, but it failed, referencing something to do with fdroid. I wiped again and reinstalled CM, but I still couldn't get past the Bootloader Unlocked warning.
I booted into TWRP again and wiped what I could, and accidentally wiped my external SD, and I had no card readers lying around to get the ROM zips back onto it. I downloaded the Razr HD utility, used the batch file, and tried to flash the stock rom through fastboot, but it got stuck in some kind of loop and would not flash correctly. I then tried to do it manually, but got some sort of buffer error. I tried again, and it started ok but I never saw it actually finish flashing.
By this time I finagled the ROM zips onto the SD card and stopped the fastboot and booted into TWRP. I did another set of wipes, and rebooted into TWRP again. I flashed the CM and Gapps. The ROM booted fine from TWRP and I was able to start setting up my account again. I tried rebooting after the initial setup just to see if it was working correctly, and was met with the fastboot screen with fastboot reason: Flash failed. I rebooted into TWRP from there, and tried to boot normally, but it still brought me to the fastboot. I went to the boot menu and tried the normal boot selection, and now my phone is stuck on the Bootloader Warning screen and now it won't even turn off when I hold the power button.
I have no idea what is going on, or why I could get to the working ROM once but not again. Does anyone know anything that could help me?
Click to expand...
Click to collapse
Try the solution in the last few posts on this thread. http://forum.xda-developers.com/showthread.php?t=2465695
I hope you get more knowledgeable advice than mine but, were I in your situation, my primary goal would be to get back to STOCK. Forget CM and modding for now. Either through TWRP or through the recovery settings on the phone itself I'd get to where I could do a factory reset. If you're continuously able to boot into TWRP I don't see how your phone could be bricked. My experience is, if I can get a phone to do ANYTHING I've got a shot at figuring out how to get out of whatever mess I've created. I don't know if this could be a factor but I'd put in a different micro SD card too, in case there's something on the card you've got in there.
Just an update. So, I got it to go back to fastboot this morning and I tried using the Razr Utility to flash back stock and stock recovery, but I got a "Failed" line with the reason "Remote Failure". Not sure what that's about. When it reset it got back to the Cyanogenmod boot graphic, but it never started. I left it there for a good 12 minutes.
Right now it's sitting in TWRP. I'm going to let it charge to 100% (it was a little less when I tried all of this) and attempt it again at 100% battery. Thanks for the help so far!
So, I tried using the Razr Utility to flash the system, kernel, radio and for system it was unsuccessful (something about too many threads or strings, something to that effect), but the rest said OK. Now my phone doesn't seem to turn on. My computer still makes the device plugged in sound when it's plugged/unplugged, but I cannot get the screen to show anything or seem to turn on the phone.
Is this it? Is it... bricked!? ;-;
Edit: I ordered the Factory Adapter as a last resort sort of thing. This is lame.
Edit Edit: I've seen the boot logo since my last edit! But... it's not coming back and I still can't even bring up the bootloader. I don't know why it will sometimes turn on or sometimes not. In any case, I'm now hopeful that not ALL is lost.
Bottom line, the adapter will allow you to fix your phone and flash the stock FXZ in RSD Lite or fastboot and get back to a clean slate and start over.
That's why we went to the trouble of making them!
cellzealot said:
Bottom line, the adapter will allow you to fix your phone and flash the stock FXZ in RSD Lite or fastboot and get back to a clean slate and start over.
That's why we went to the trouble of making them!
Click to expand...
Click to collapse
That's the plan! One odd thing happening now... My phone's screen isn't showing anything, so I assumed it was off. I left it unplugged and went to see a movie..... and the phone is still warm. This leads me to believe the phone is still drawing power, for some reason... God this is weird. I'll wait for the adapter and try again. Thanks for the help!
cellzealot said:
Bottom line, the adapter will allow you to fix your phone and flash the stock FXZ in RSD Lite or fastboot and get back to a clean slate and start over.
That's why we went to the trouble of making them!
Click to expand...
Click to collapse
according to the packaging on mine from tbh a chinaman made it, just sayin
Yes, we designed them and contracted through our US supplier who produced all of our cables who, in turn, had them produced in China according to our specifications. There is no longer any injection molded plastic production done in the US that can work at this small scale for affordable rates.
Sorry...that's the way the world works these days.
cellzealot said:
Yes, we designed them and contracted through our US supplier who produced all of our cables who, in turn, had them produced in China according to our specifications. There is no longer any injection molded plastic production done in the US that can work at this small scale for affordable rates.
Sorry...that's the way the world works these days.
Click to expand...
Click to collapse
thanks for making it either way, better to have and not need.
havent had to use it so far
bweN diorD said:
thanks for making it either way, better to have and not need.
havent had to use it so far
Click to expand...
Click to collapse
You're welcome! They are definitely the best $10 investment you can make in any Motorola phone.
Next time you want to invest many thousands of dollars of your own money in a wild, hairbrained scheme to help a bunch of anonymous people on the internet fix their phones that they recently finished destroying themselves, let us know...we have just the plan!
cellzealot said:
You're welcome! They are definitely the best $10 investment you can make in any Motorola phone.
Next time you want to invest many thousands of dollars of your own money in a wild, hairbrained scheme to help a bunch of anonymous people on the internet fix their phones that they recently finished destroying themselves, let us know...we have just the plan!
Click to expand...
Click to collapse
how many thousands, and whats the plan?
I got the Factory Adapter and used RSD Lite to flash stock. And it works! Yay! It's starting up reliably and everything.
Except... it won't start up without the cable attached, and the battery icon has a big question mark on it. It also won't connect to the cell network (but does connect to WiFi). What do I do now?
Edit: So I noticed that while the battery status said "Unknown", it did go from 2% to 3% charge level when I plugged it in normally for a little. My plan at the moment is to try leaving it plugged in for a while and then try taking the OTA update to see if that fixes everything. Good plan?
Edit Edit: Never mind! I just had to let it charge for a bit. It seems to be back in working order, now! Thank you so much for all the help everyone!
That is exactly what is supposed to happen. Congrats on fixing your phone!
The factory cable/adapter does not charge the device but powers it directly, allowing it to boot no matter what state the battery is in or even without a battery at all.
You cannot charge in bootloader, which is why the cable/adapter is so valuable. Once the device can boot/charge normally then you are all set.
Hey folks...I'm running into a problem I was hoping someone might be able to help with.
Earlier today I pulled my phone out of my pocket at work and saw that it was off...I thought that the battery must have died sooner than I thought. I started charging it in the car on the way home and it wouldn't boot up like normal. It would get to the google or "dots" screen and then reboot. I again thought that the battery might just be really low. After getting home and charging the phone all the way I still can't get it to boot up. As of now, one of 3 things will happen...
1-The phone will turn on, get to the google screen and bootloop (usually when plugged in).
2-The phone will turn on, get to the google screen and freeze.
3-Get to the "dots" screen and either swirl forever or eventually reboot and do one of the above again.
I've read some threads where people suggest this is a faulty power button, that doesn't seem to be the case for me though because I can get into fastboot and it won't select anything or turn off without me doing it.
I've used WugFresh NRT and wiped/reflashed android. I'm running out of ideas. Do you have any others?
I was running the stock 5.0.1, unlocked, not currently rooted.
Thanks!
kyle313 said:
Hey folks...I'm running into a problem I was hoping someone might be able to help with.
Earlier today I pulled my phone out of my pocket at work and saw that it was off...I thought that the battery must have died sooner than I thought. I started charging it in the car on the way home and it wouldn't boot up like normal. It would get to the google or "dots" screen and then reboot. I again thought that the battery might just be really low. After getting home and charging the phone all the way I still can't get it to boot up. As of now, one of 3 things will happen...
1-The phone will turn on, get to the google screen and bootloop (usually when plugged in).
2-The phone will turn on, get to the google screen and freeze.
3-Get to the "dots" screen and either swirl forever or eventually reboot and do one of the above again.
I've read some threads where people suggest this is a faulty power button, that doesn't seem to be the case for me though because I can get into fastboot and it won't select anything or turn off without me doing it.
I've used WugFresh NRT and wiped/reflashed android. I'm running out of ideas. Do you have any others?
I was running the stock 5.0.1, unlocked, not currently rooted.
Thanks!
Click to expand...
Click to collapse
Did you try flashing factory images?
ryukiri said:
Did you try flashing factory images?
Click to expand...
Click to collapse
Yeah, that was what I flashed :/
If you can get into fastboot you "should" be able to flash stock images... Obviously this will revert any root and you will need to flash TWRP/CWM recovery after.
I assume you have a Windows PC with fastboot/adb setup and all drivers etc..
- Download latest "stock" hammerhead images (I cannot post links due to XDA rules... so: "developers.google.com/android/nexus/images#hammerhead"
- Extract the .tgz archive contents on your PC into a folder
- Boot the N5 into fastboot and plug USB cable from phone into your PC
- Go to the folder with the extracted files and run the "flash-all.bat" script on Windows
**Hopefully at this point your device will start to respond.. I.e, on fastboot screen, at the bottom you will see "writing" or something, as the script runs on the command window on your PC.**
If this works, you should be able to reboot once complete and then wait to see if you can get back into your phone.. then you can fastboot again and flash custom recovery, and then whatever rom.
If however you have a hardware issue (i.e, even after the above process it fails) then I am not sure what you could do... I guess ensure it has a complete charge. If you can get into fastboot and the buttons are responsive then it should not be a faulty power button.
Hope this helps :good:
Have you tried a simple factory reset? Reason I ask is it was working fine so sounds like something needs "flushing out" clear cache etc.
kyle313 said:
Hey folks...I'm running into a problem I was hoping someone might be able to help with.
Earlier today I pulled my phone out of my pocket at work and saw that it was off...I thought that the battery must have died sooner than I thought. I started charging it in the car on the way home and it wouldn't boot up like normal. It would get to the google or "dots" screen and then reboot. I again thought that the battery might just be really low. After getting home and charging the phone all the way I still can't get it to boot up. As of now, one of 3 things will happen...
1-The phone will turn on, get to the google screen and bootloop (usually when plugged in).
2-The phone will turn on, get to the google screen and freeze.
3-Get to the "dots" screen and either swirl forever or eventually reboot and do one of the above again.
I've read some threads where people suggest this is a faulty power button, that doesn't seem to be the case for me though because I can get into fastboot and it won't select anything or turn off without me doing it.
I've used WugFresh NRT and wiped/reflashed android. I'm running out of ideas. Do you have any others?
I was running the stock 5.0.1, unlocked, not currently rooted.
Thanks!
Click to expand...
Click to collapse
Did you choose the right model and firmware before you flash in WugFresh NRT?
The above could be right, however when I've used it, it's pointed out if I made that mistake. Having used his software dozens of times I've found it will bring any Nexus 5 back to life.
howard bamber said:
The above could be right, however when I've used it, it's pointed out if I made that mistake. Having used his software dozens of times I've found it will bring any Nexus 5 back to life.
Click to expand...
Click to collapse
Hello! I am apologize for that I didn't read the OP carefully. This happened to me once in that particulary way, but it was immediately after flashing. OP says that it happened suddenly, without reason. So now I am the one, who doesn't read, right? Sorry for that.
Regards, Zagor
Thanks for the responses, but I'm still having trouble.
I have been able to successfully write the newest stock android 3 times (1 without full wipe, 2 with) and the phone still can't boot up and goes through one of the three issues above.
I've also been able to get to the system recovery from the bootloader and I've tried wiping the cache and doing a factory reset from there and the problem remains.
I'd contact google, but I bought it at launch so I don't think they'll do anything for me since it's been 1+ years.
kyle313 said:
Thanks for the responses, but I'm still having trouble.
I have been able to successfully write the newest stock android 3 times (1 without full wipe, 2 with) and the phone still can't boot up and goes through one of the three issues above.
I've also been able to get to the system recovery from the bootloader and I've tried wiping the cache and doing a factory reset from there and the problem remains.
I'd contact google, but I bought it at launch so I don't think they'll do anything for me since it's been 1+ years.
Click to expand...
Click to collapse
Sounds like you have a bad nand sector. From fastboot try:
Code:
fastboot oem lock
Then reboot into fastboot and check if it's locked or not. If the device isn't locked your emmc is corrupt and there is nothing you can do. If that is the case call Google and they will most likely help you out with a RMA.
theesotericone said:
Sounds like you have a bad nand sector. From fastboot try:
Code:
fastboot oem lock
Then reboot into fastboot and check if it's locked or not. If the device isn't locked your emmc is corrupt and there is nothing you can do. If that is the case call Google and they will most likely help you out with a RMA.
Click to expand...
Click to collapse
I was actually able to relock the phone.
Luckily I called google and they're going to send me a replacement.
If anyone else has any other ideas, I'll still take them...I'd rather not be without a phone for the next week!
You won't be without a phone - they are sending a refurbish unit to you , putting a block on your credit card and waiting for you phone to arive at them. Once that happens they will release the funds.
I had my OPO for about two week before this bug had happened, it was on the charger when suddenly the screen flashed as if it was updating, and it counted from 1 to 121 and then restarted. I though it was just updating automatically until i came back to use it and was stuck at the bootloader animation and just rotating, but never actually loading.
I looked up online on this issue and found out its a common bug, and i went ahead and put my phone in fastboot and unlocked the bootloader and it went fine except that it didn't restart like the videos I saw, I though it was an error so i ran the command to show the info and it turns out i I am unlocked already. So i went ahead and tried to flash the stock recovery again but i keep getting FAILURE:Failed to erase partition or some times i get failed to flash. So I booted into twrp recovery, but I don't have it flashed through a boot command i looked up the terminal which showed failed to mount the E:/data and the cache folder or anything i tried it would either fail or have no access to it. Is my OPO bricked to death or can it be fixed.
Please if anyone can help me I would appreciate it much.
P.S. (This phone that broke I bought off a china retailer, although i have the international copy bought from the OPO store.)
red_devilsrr said:
I had my OPO for about two week before this bug had happened, it was on the charger when suddenly the screen flashed as if it was updating, and it counted from 1 to 121 and then restarted. I though it was just updating automatically until i came back to use it and was stuck at the bootloader and just rotating, but never actually loading.
I looked up online on this issue and found out its a common bug, and i went ahead and put my phone in fastboot and unlocked the bootloader and it went fine except that it didn't restart like the videos I saw, I though it was an error so i ran the command to show the info and it turns out i I am unlocked already. So i went ahead and tried to flash the stock recovery again but i keep getting FAILURE:Failed to erase partition or some times i get failed to flash. So I booted into twrp recovery, but I don't have it flashed through a boot command i looked up the terminal which showed failed to mount the E:/data and the cache folder or anything i tried it would either fail or have no access to it. Is my OPO bricked to death or can it be fixed.
Please if anyone can help me I would appreciate it much.
P.S. (This phone that broke I bought off a china retailer, although i have the international copy bought from the OPO store.)
Click to expand...
Click to collapse
I'd suggest using one of these methods:
http://forum.xda-developers.com/showthread.php?t=2970390
http://forum.xda-developers.com/showthread.php?t=2991851
http://forum.xda-developers.com/oneplus-one/help/guide-unbrick-oneplus-one-t3013732
And one thing...
red_devilsrr said:
...was stuck at the bootloader and just rotating, but never actually loading...
Click to expand...
Click to collapse
What you're talking about there is the boot animation, not the bootloader, they're two very different things.
Transmitted via Bacon
timmaaa said:
I'd suggest using one of these methods:
http://forum.xda-developers.com/showthread.php?t=2970390
http://forum.xda-developers.com/showthread.php?t=2991851
http://forum.xda-developers.com/oneplus-one/help/guide-unbrick-oneplus-one-t3013732
And one thing...
What you're talking about there is the boot animation, not the bootloader, they're two very different things.
Transmitted via Bacon
Click to expand...
Click to collapse
I have tried one of the methods there but the problem is not with the method its with the flashing of the phone itself it keeps failing or even when i try to erase a partition.
And i will be changing that to the bootloader animation.
http://forum.xda-developers.com/showthread.php?t=2820912
I'm on my second oneplus after I shattered the screen on the first, bought this one used and for whatever reason the bootloader wouldn't unlock using fastboot commands. Sounds like the same thing is going on with yours. I finally got mine unlocked with the tool in that link.
red_devilsrr said:
I have tried one of the methods there but the problem is not with the method its with the flashing of the phone itself it keeps failing or even when i try to erase a partition.
And i will be changing that to the bootloader animation.
Click to expand...
Click to collapse
Ok, perhaps you need to try the methods that you haven't tried though. And it's just boot animation, not bootloader animation.
Transmitted via Bacon
Hello guys,
so two days ago just when I was heading into work my phone randomly started restarting itself again and again. I had it in my pocket, mobile data and wifi off and nothing really going on when this happened. I was on stock Cyanogen OS with 6.0.1, rooted and with Xposed, but nothing too crazy or experimental.
The phone would boot with a small vibration to the Oneplus logo with the "Powered by Android" writing, stay on that for about 17-18 seconds, then reboot again. No way of going to the recovery with the hardware keys, it would just reboot the same again and again. Since I couldn't really do much, not turn it off and no way of disconnecting the battery, I just had to watch it reboot helplessly until the battery was dead. At home with some hassle I could get it charged again, which basically consisted of charging it while it kept rebooting and cooling it while doing that since it would get really, really hot.
The only option that really works is is getting it into fastboot via the volume up + power button. But in fastboot nothing I did so far changed even the smalles thing about it's behaviour. I tried flashing a new recovery image, letting it boot into the recovery via fastboot (both stock recovery and TWRP), reflashing the complete OS via fastboot again (CM 13 ZNH2KAS3P0), completely wiping it via fastboot and flashing an older ROM (CM11S XNPH44S) but so far nothing has even changed a thing. It keeps booting to the Oneplus logo for about 17-18 seconds before rebooting. The only thing that has changed is with the CM11S ROM the fastboot logo of the android head is now bigger.
I checked the bootloader via fastboot, but it's still unlocked.
So yeah, I'm at my wits end and desperate for any help. At this point I fear it might be a hardware issue and I can trash it, but I'm ready to grasp for straws as I don't really have the money for a new device yet.
Any help is appreciated! Thanks guys!
Atomschlumpf said:
Hello guys,
so two days ago just when I was heading into work my phone randomly started restarting itself again and again. I had it in my pocket, mobile data and wifi off and nothing really going on when this happened. I was on stock Cyanogen OS with 6.0.1, rooted and with Xposed, but nothing too crazy or experimental.
The phone would boot with a small vibration to the Oneplus logo with the "Powered by Android" writing, stay on that for about 17-18 seconds, then reboot again. No way of going to the recovery with the hardware keys, it would just reboot the same again and again. Since I couldn't really do much, not turn it off and no way of disconnecting the battery, I just had to watch it reboot helplessly until the battery was dead. At home with some hassle I could get it charged again, which basically consisted of charging it while it kept rebooting and cooling it while doing that since it would get really, really hot.
The only option that really works is is getting it into fastboot via the volume up + power button. But in fastboot nothing I did so far changed even the smalles thing about it's behaviour. I tried flashing a new recovery image, letting it boot into the recovery via fastboot (both stock recovery and TWRP), reflashing the complete OS via fastboot again (CM 13 ZNH2KAS3P0), completely wiping it via fastboot and flashing an older ROM (CM11S XNPH44S) but so far nothing has even changed a thing. It keeps booting to the Oneplus logo for about 17-18 seconds before rebooting. The only thing that has changed is with the CM11S ROM the fastboot logo of the android head is now bigger.
I checked the bootloader via fastboot, but it's still unlocked.
So yeah, I'm at my wits end and desperate for any help. At this point I fear it might be a hardware issue and I can trash it, but I'm ready to grasp for straws as I don't really have the money for a new device yet.
Any help is appreciated! Thanks guys!
Click to expand...
Click to collapse
how old is the device?
As far as I know my sister bought it around summer 2014 when it was released, I got it in late 2015
Atomschlumpf said:
As far as I know my sister bought it around summer 2014 when it was released, I got it in late 2015
Click to expand...
Click to collapse
https://forum.xda-developers.com/oneplus-one/general/tool-oneplusrecovery-tool-v1-0-restore-t2991851
AFAIK,If this toolkit can't fix your device then it's definitely hw issue.
Mr.Ak said:
https://forum.xda-developers.com/oneplus-one/general/tool-oneplusrecovery-tool-v1-0-restore-t2991851
AFAIK,If this toolkit can't fix your device then it's definitely hw issue.
Click to expand...
Click to collapse
Well, the tool won't even recognize my phone, so I guess I'm **** out of luck ¯\_(ツ)_/¯
****ing great....
Atomschlumpf said:
Well, the tool won't even recognize my phone, so I guess I'm **** out of luck ¯\_(ツ)_/¯
****ing great....
Click to expand...
Click to collapse
Lol,gave up that early?
It needs around 10 tries to get it correctly recognised.
Use XP system with the proper drivers given in the above thread.This tool doesn't work on adb/fastboot,it works on Usb Debugging Port,hence requires different drivers.
Mr.Ak said:
Lol,gave up that early?
It needs around 10 tries to get it correctly recognised.
Use XP system with the proper drivers given in the above thread.This tool doesn't work on adb/fastboot,it works on Usb Debugging Port,hence requires different drivers.
Click to expand...
Click to collapse
No, I didn't. I tried the USB Drivers I had already installed, the drivers that came in the package and the QPST Tool suggested in the thread on both my and my girlfriends laptop. But if it doesn't work on ADB/fastboot I probably can't use it anyway since my only two options are having the phone on the fastboot screen or having it constantly reboot....
At this point I'm just really, really frustrated and have sorta accepted it's very likely a hardware issue
I'm with the same problem. In my case, the tool does recognize and shows green after the end but when i try to boot, it only shows the boot logo.
I can enter in fastboot and trying the command "fastboot continue" the brightness goes up, but nothing else
already tried various tools, back to stock, qualcomm , and none worked, so can i throw it out of the window?
Edit: can't enter in recovery, and unlike the op, my phone doesn't reboot (at least i didn't notice it)
So I got my phone fully working minus getting into fast boot to flash TWRP (though I already have it).
This is the rundown of what happened (mind you I was drunk).
I went to change the fastboot image after drinking like 10ish or so beer not really sure anymore. Anyways I tried flashing it through TWRP. Later I realize how silly it was but it doesn't let me into fastboot anymore. (found this out later when I went to update TWRP.)
I am looking for a relatively way safe way to fix it as I'm sure I am not the first.
Some Advice on how to fix as I really don't wanna risk bricking it would be fantastic.
Thank you,
Shinobi_warrior said:
So I got my phone fully working minus getting into fast boot to flash TWRP (though I already have it).
This is the rundown of what happened (mind you I was drunk).
I went to change the fastboot image after drinking like 10ish or so beer not really sure anymore. Anyways I tried flashing it through TWRP. Later I realize how silly it was but it doesn't let me into fastboot anymore. (found this out later when I went to update TWRP.)
I am looking for a relatively way safe way to fix it as I'm sure I am not the first.
Some Advice on how to fix as I really don't wanna risk bricking it would be fantastic.
Thank you,
Click to expand...
Click to collapse
https://forum.xda-developers.com/oneplus-one/general/tool-oneplusrecovery-tool-v1-0-restore-t2991851
Maybe It's a driver issue I am having. Because what happens more specifically is fastboot menu vibrates a few times and goes to teh charging screen and doesn't allow me to flash anything (mind you this previously worked) I don't believe it is a driver issue though. Simply put I am unable to get into adb without loading the os and when the os is loaded It hangs on waiting for device. I tried manually flashing the stock logo.bin with no success..
Not sure if maybe im missing something here. Like my fastboot loads a little penguin on it instead of the stock image and then vibrates a **** load then loads the battery charger.
Shinobi_warrior said:
Maybe It's a driver issue I am having. Because what happens more specifically is fastboot menu vibrates a few times and goes to teh charging screen and doesn't allow me to flash anything (mind you this previously worked) I don't believe it is a driver issue though. Simply put I am unable to get into adb without loading the os and when the os is loaded It hangs on waiting for device. I tried manually flashing the stock logo.bin with no success..
Not sure if maybe im missing something here. Like my fastboot loads a little penguin on it instead of the stock image and then vibrates a **** load then loads the battery charger.
Click to expand...
Click to collapse
Are you able to boot into twrp? If yes,then flash this firmware.It should solve any firmware corrupt issues,i.e. you should be able to boot into fastboot again.
Thank you, YES this is exactly what I needed/looking for.
.
You have fixed/saved the Day confirmed now.