Q&A for [4.4.4][CDMA]Snake's Venom 4.4.4 Moto X Port Build #102 For XT1080/M/1030
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [4.4.4][CDMA]Snake's Venom 4.4.4 Moto X Port Build #102 For XT1080/M/1030. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
problems with quicksettings
flashed this last night and again just now both time quick settings will not work. the button is there but they will never show up. Only the notifications will pull down. any ideas? nevermind
I have been using motorola droid mini x1030 and I am unable to use 3G service. I am from Pakistan and when I try to install 3G service from my carrier, my device says this phone does not support 3G. I think this is by verizon so I should install the custom rom to make it international version.
I tried to change the network setting from GSM to UMTS and my signal and service gone.
Should I install this rom to unable 3G service?
Was able to get a logcat going for the 5ghz WiFi problem.
What happens is I can see the network, add it, then once I press connect it does nothing.
Some times it shows as Not in range.
https://www.dropbox.com/s/ijr9stwk6f31jgj/5ghzwifi.txt?dl=0
Toward the middle and bottom is where most of the errors are displayed.
I repeatedly tried to connect even trying to toggle WiFi, set only to 5ghz, and forget and re-add the network.
Where you see it attempting to connect to "NETGEAR36-5G" is a network that just showed up (and I do not know the password) after attempting to connect to my network "GoldCat-5G".
Seems like it could be a wpa_supplicant problem not sending the password correctly? My router is set to WPA2 AES.
I flaahed port #102 to my Droid MAXX and I love the rom. Best one I've had so far. Excellent battery life and very smooth. Only issue I'm having is that my camera isn't working. Whenever I open the camera app, it freezes and says "Please restart camera". Am I the only one with this problem? I searched the thread and couldn't find any info on it.
Loading Snake's Venom 4.4.4 Moto X Port on the Droid Mini
I loaded this port on my Droid Mini last night and all went well. Topsnake you are the best. I found step 10 in your guide a little confusing. I ended up loading 4.4.4_Display_Tether_Patch__Build_102.zip and 4.4.4-XT1030_Patch_Build_102.zip. Is this correct?
One of the things I love about this project is that you keep improving it. So here is suggestion, including a readme with your install steps and a description of all the included files would be a real plus for those who are new to loading Android ROMs.
Again, thanks for all your hard work
nemoman said:
I loaded this port on my Droid Mini last night and all went well. Topsnake you are the best. I found step 10 in your guide a little confusing. I ended up loading 4.4.4_Display_Tether_Patch__Build_102.zip and 4.4.4-XT1030_Patch_Build_102.zip. Is this correct?
One of the things I love about this project is that you keep improving it. So here is suggestion, including a readme with your install steps and a description of all the included files would be a real plus for those who are new to loading Android ROMs.
Again, thanks for all your hard work
Click to expand...
Click to collapse
#1 Thank you for the donation! You're fine the way you flashed it however mini users need only flash the mini patch.
Bluetooth not working
I did the snake's venom to my wife's and my droid maxx. It works great on my phone but on hers the bluetooth will work like 1 out of 100 times and then just cut off. It has worked flawlessly for over a year. Needless to say I am in the doghouse now cause "I broke her bluetooth". Please help. I have tried clearing, reseting, going back to 4.4.4 OTA then starting over and radio flash. I am at a loss.
hdd-max said:
I did the snake's venom to my wife's and my droid maxx. It works great on my phone but on hers the bluetooth will work like 1 out of 100 times and then just cut off. It has worked flawlessly for over a year. Needless to say I am in the doghouse now cause "I broke her bluetooth". Please help. I have tried clearing, reseting, going back to 4.4.4 OTA then starting over and radio flash. I am at a loss.
Click to expand...
Click to collapse
Does it work correctly on 4.4.4? Also what baseband you using?
topsnake said:
does it work correctly on 4.4.4? Also what baseband you using?
Click to expand...
Click to collapse
msm8960pro_bp_23255.127.76.00r
hdd-max said:
msm8960pro_bp_23255.127.76.00r
Click to expand...
Click to collapse
Try downgrading to the previous baseband and report back.
Topsnake said:
Does it work correctly on 4.4.4? Also what baseband you using?
Click to expand...
Click to collapse
Topsnake said:
Try downgrading to the previous baseband and report back.
Click to expand...
Click to collapse
That seems to have fixed it. Hopefully it stays that way. Thank you!
hdd-max said:
That seems to have fixed it. Hopefully it stays that way. Thank you!
Click to expand...
Click to collapse
Glad to hear it's working now.
Topsnake said:
Glad to hear it's working now.
Click to expand...
Click to collapse
Spoke too soon. It didn't work again as of this morning. It's works once in a blue moon. I tried a couple baseband versions and same thing happens.
Using Philz CWM instead of TWRP...
Do you think I'll be ok if I have Philz CWM instead of TWRP when installing this rom?
Alodar said:
Do you think I'll be ok if I have Philz CWM instead of TWRP when installing this rom?
Click to expand...
Click to collapse
Should be OK
hdd-max said:
Spoke too soon. It didn't work again as of this morning. It's works once in a blue moon. I tried a couple baseband versions and same thing happens.
Click to expand...
Click to collapse
I'm lost then. It works fine on stock 4.4.4?
Topsnake said:
Should be OK
I'm lost then. It works fine on stock 4.4.4?
Click to expand...
Click to collapse
Here is how it went down. The phone was rooted on 4.4.2 and was that way since the pie root came out. Once the sunshine was available I unlocked both of our phones. I flashed your 102 build on both phones and from that point on her bluetooth was broke. Her phone worked 100% of the time on bluetooth before I upgraded. Irealized after the fact that I was supposed to put the phone on 4.4.4 ota BEFORE I flashed yours. I tried to go back to 4.4.2 but that does not work. I then went to 4.4.4 ota and let it completely boot and set up. Bluetooth wouldn't work on that either. I then went back to your build and still not working. I flashed a couple different basebands and it still doesn't work. When it does work it's for a very brief amount of time.
hdd-max said:
Here is how it went down. The phone was rooted on 4.4.2 and was that way since the pie root came out. Once the sunshine was available I unlocked both of our phones. I flashed your 102 build on both phones and from that point on her bluetooth was broke. Her phone worked 100% of the time on bluetooth before I upgraded. Irealized after the fact that I was supposed to put the phone on 4.4.4 ota BEFORE I flashed yours. I tried to go back to 4.4.2 but that does not work. I then went to 4.4.4 ota and let it completely boot and set up. Bluetooth wouldn't work on that either. I then went back to your build and still not working. I flashed a couple different basebands and it still doesn't work. When it does work it's for a very brief amount of time.
Click to expand...
Click to collapse
You need to get the most current stock 4.4.4 FXZ and flash that. Then come back to this. Report back
Sorry to say guys but the current build will be the last. I've moved to a new device. Both my maxx and ultra are on eBay.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Topsnake said:
Sorry to say guys but the current build will be the last. I've moved to a new device. Both my maxx and ultra are on eBay.
Click to expand...
Click to collapse
Aww so sad. Good for you though man. You've been a great contributor to the community. How do you like your new iPhone? Haha
Sent From My Droid Ultra
Related
[ROM][3/21/14][4.4.2] AOSPA 4.2 Beta
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
MAKE A BACKUP
1. UPDATE RECOVERY
2. FACTORY RESET
3. INSTALL ROM
3. INSTALL GAPPS
Click to expand...
Click to collapse
DOWNLOADS
4.0x Main Link
PA Gapps
KNOWN BUGS:
LED is a bit wonky
PA OTA FCs
Click to expand...
Click to collapse
Links
Website: http://www.paranoidandroid.co
Github: www.github.com/AOSPA-legacy
Gerrit: http://gerrit.paranoidandroid.co
Click to expand...
Click to collapse
@molesarecoming & @D4rKn3sSyS for this oustanding rom!
Click to expand...
Click to collapse
XDA:DevDB Information
AOSPA 4.0, a ROM for the Moto X
Contributors
ayysir, houstonn
Based On: AOSP
Version Information
Status: Beta
Created 2014-02-25
Last Updated 2014-03-21
Reserved
Reserved
reserved
Awesome !!!!!!!
Also what do you mean by update recovery???
Sent from my Nexus 7 using Tapatalk
mcsqwizzys98 said:
Awesome !!!!!!!
Also what do you mean by update recovery???
Sent from my Nexus 7 using Tapatalk
Click to expand...
Click to collapse
Pretty sure it means make sure you're using the most recent stable recovery. Check with twrp or cwm before flashing. Sometimes outdated versions give off errors and can't flash.
Sent from my LG-D803 using Tapatalk
Awesome !!!!!! Downloading now
Sent from my Moto X using Tapatalk
Finally got this installed and it is a very nice ROM IMHO. Very much stock aosp there isn't a ton of feature like some of the other aosp ROMs but I really like the smoothness this ROM has to offer and everything works only bug I have is the speaker phone bug is present when in a call if I put on speaker phone I have to reboot to even get back in the dialer app.
Sent from my Moto X using Tapatalk
Here are the logcats I promised from G+. This is on a clean flash, barebones. Nothing other then TItanium Backup, the loggers, and my favorite file manager added.
Logcat0 is the first time opening PA OTA. It times out and gives ROM not found error, then update not found error.
Logcat1 is the second time opening it, but this time it sees I could use the gapps. It does allow to download as well, yesterday it wouldn't. May have been my location at work (edit: see data issue below).
Logcat2 is me calling the phone, answering and checking all is well. Then I switch to speaker phone and all seems well. Then switch back to and it stays on speaker with no microphone action. I hang up, close the app. Reopen the dialer and its just a white screen. Then it turns black. Close the dialer and reopen with the same issue. Yesterday I thought it rebooted after. Today I confirmed it reboots shortly after. Couldn't pull a kmsg since there's no "/process/last_kmsg" file/location.
Also, after awhile data drops out and won't come back no matter what. Logcat3 is data turned off, then turned back on. This is after it being on and loosing it totally. Seen some USB state changed for this log, yet nothing was ever plugged in.
I also randomly get this simcard issue window shown but haven't been able to grab it.
Sim pic
gokart2 said:
Sim pic
Click to expand...
Click to collapse
Thanks for pulling these logs for the devs I am experiencing the same issues not only on this ROM but every Aosp ROM for us sprint users (the data issue). Hopefully they can solve the issues other than that this ROM is rock solid I'm not running it at this moment but much appreciated that you took the logs.
Sent from my Moto X using Tapatalk
Touchless Control
Will it be possible to have touchless controls from Motorola working again with the device?
Droyyd said:
Will it be possible to have touchless controls from Motorola working again with the device?
Click to expand...
Click to collapse
Probably not, aosp roms aren't going to have the Motorola features
Sent from my XT1053 using Tapatalk
gokart2 said:
Here are the logcats I promised from G+. This is on a clean flash, barebones. Nothing other then TItanium Backup, the loggers, and my favorite file manager added.
Logcat0 is the first time opening PA OTA. It times out and gives ROM not found error, then update not found error.
Logcat1 is the second time opening it, but this time it sees I could use the gapps. It does allow to download as well, yesterday it wouldn't. May have been my location at work (edit: see data issue below).
Logcat2 is me calling the phone, answering and checking all is well. Then I switch to speaker phone and all seems well. Then switch back to and it stays on speaker with no microphone action. I hang up, close the app. Reopen the dialer and its just a white screen. Then it turns black. Close the dialer and reopen with the same issue. Yesterday I thought it rebooted after. Today I confirmed it reboots shortly after. Couldn't pull a kmsg since there's no "/process/last_kmsg" file/location.
Also, after awhile data drops out and won't come back no matter what. Logcat3 is data turned off, then turned back on. This is after it being on and loosing it totally. Seen some USB state changed for this log, yet nothing was ever plugged in.
I also randomly get this simcard issue window shown but haven't been able to grab it.
Click to expand...
Click to collapse
thanks but did not explain much, a longer logcat also helps
Devans32 said:
Probably not, aosp roms aren't going to have the Motorola features
Sent from my XT1053 using Tapatalk
Click to expand...
Click to collapse
Hmm, it's not good. No active display, no notifications led
Thanks, ayysir for bringing P.A. to the moto x.
I have one question. Where are P.A. settings and halo?
I hope they still exist.
perri.etb said:
Thanks, ayysir for bringing P.A. to the moto x.
I have one question. Where are P.A. settings and halo?
I hope they still exist.
Click to expand...
Click to collapse
dont exist...
New build up
Sent from my LG-D801 using Tapatalk
ayysir said:
New build up
Sent from my LG-D801 using Tapatalk
Click to expand...
Click to collapse
Where can I download it?
d14gvn said:
Where can I download it?
Click to expand...
Click to collapse
Link's in the OP but here it is
Markox89 CyanogenMod 13 Builds
Help Thread
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Please read the FAQ before asking any questions.
It is quite possible your question may have already been answered. Otherwise you may help me improve that section! :highfive:
I'd like to separate questions from the main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by myself. Thanks for understanding and for helping to keep XDA neat and tidy!
Welcome to the my builds' help thread! You can ask all questions here without the need of background knowledge. This thread is dedicated to solve users problems, so if you don't want to start a new thread for your question, ask it here. Members ready to help will be monitoring this thread and provide answers as soon as possible.
To those seeking help: Please don't write PMs asking for help. Instead, ask your question here in the thread so others can benefit from the solution to your problem as well. If you want to be sure someone particular gets notified of your question, put his / her username directly after an @. Also, if you have ROM related questions, post in the relevant ROM Q&A thread (if there is one) or directly in the ROM development thread. If you are not eligible of posting there, you may post here. Thank you!
ROM developers: Please read this. Consider if you want to have a ROM specific help thread or not, if not, most likely questions about your ROM will be asked here if the users aren't eligible for posting in development section.
To all of you: Remember the Rules and the Forum Etiquette.
chromecast
Hello,
Have installed this great image on my p5110 and it run currently with no known issue.
Only I haven' t menu item "Cast screen" in cromecast.
So I installed "Dhollmen_Blobs_P5_20141012.zip" as described in #2
But still no menu item.
Any idea how I can get this menu item on my p5110?
xdadev_user said:
Any idea how I can get this menu item on my p5110?
Click to expand...
Click to collapse
Just follow the instructions provided here
My tablet has become very unstable - apps crashing, random reboots. Is anyone else experiencing issues? I think I will try going back a couple of builds. Do I just install older build on top of newer?
Edit: I installed the 11-3 build (over the 11-22) but my tablet is still klabooey. Should I have started from scratch? Any advice on how to troubleshoot? I haven't installed any new apps but regularly install updates so it could be anything.
Edit 2: It occurred to me that I recently started installing the latest blobs for the kernel. Could that be a problem?
Sent from my Naked Samsung SM-G900A
@sharonbw, try a full wipe (both system and data partitions), then install latest build, Gapps and the blobs, nothing else.
This should work
Thanks @Markox89. I did do a complete wipe including media and a clean install. Even without any apps installed it still didn't work (downloaded 3 times to be sure). I think my tablet must have something wrong with it. Anyway, I installed CM11-M12 and it's fine now except for a weird thing it's doing with the wallpaper - my selected wallpaper disappears and it flashes randomly between the default theme wallpaper and some blurry screen. I have to reboot to get it to stop. Messed up but oh well. Something I can live with. Will our tablet ever get a lollipop build or is it too old? I'd try flashing that for fun!
Sent from my GT-p511x
@sharonbw, so I suggest you to stay on the official builds
About Lollipop I see some good work on it by @Android-Andi
sharonbw said:
Thanks @Markox89. I did do a complete wipe including media and a clean install. Even without any apps installed it still didn't work (downloaded 3 times to be sure). I think my tablet must have something wrong with it. Anyway, I installed CM11-M12 and it's fine now except for a weird thing it's doing with the wallpaper - my selected wallpaper disappears and it flashes randomly between the default theme wallpaper and some blurry screen. I have to reboot to get it to stop. Messed up but oh well. Something I can live with. Will our tablet ever get a lollipop build or is it too old? I'd try flashing that for fun!
Sent from my GT-p511x
Click to expand...
Click to collapse
If you came straight from a ICS ROM, aybe you need to try the update bootloader thing from here: http://d-h.st/iYd (p5110) flash using ODIN. Cant hurt and worth a try.
Somewhere there is a guide/tutorial, cant seem to locate it, but it is here somewhere.
Here it is:http://forum.xda-developers.com/showthread.php?t=2642005
CSP III said:
If you came straight from a ICS ROM, aybe you need to try the update bootloader thing from here: http://d-h.st/iYd (p5110) flash using ODIN. Cant hurt and worth a try.
Somewhere there is a guide/tutorial, cant seem to locate it, but it is here somewhere.
Here it is:http://forum.xda-developers.com/showthread.php?t=2642005
Click to expand...
Click to collapse
Thanks for the suggestion. I'm up to date and running CM11 M12 with no problems. I wonder if my tablet has a bad memory sector or something. Oh well. I'm good for now. Hoping for lollipop eventually.
Sent from my Naked Samsung SM-G900A
sharonbw said:
Thanks for the suggestion. I'm up to date and running CM11 M12 with no problems. I wonder if my tablet has a bad memory sector or something. Oh well. I'm good for now. Hoping for lollipop eventually.
Sent from my Naked Samsung SM-G900A
Click to expand...
Click to collapse
Ok cool. Was just a suggestion in case you came over from any ICS ROM. I know in those cases, it makes the screen glitchy and weird. Good Luck!
I've reclaimed this Q&A Thread from the Q&A Bot that auto-spawned it. I tried to make it look more like it was actually mine
I really hope that it will be used, especially for questions not related to development (e.g. questions about mods compatibility, kernels and general questions)
video in youtube app not working
After installing the 31.01.2015 update video in youtube stopped showing. It shows grey with glitchy squares instead. Installing dhollmen blobs did not help.
Locked out on ROM install
I have a P5113. I loaded Philz Touch recovery version 6.57.8 and then tried to load this ROM. Things have gone very badly. Despite having done a full wipe for a new ROM and a backup, something went wrong. New ROM zip (Jan. 31 build) will not load, nor will the backup. Philz Touch says I have lost root. Tablet stalls and loops at open screen and will not reboot. Managed to power off using Philz Touch power off feature. Any assistance would be greatly appreciated. I do have a Titanium backup as well, if I can get in to access it. Also hooking up to computer in download mode does not work. I would be forever grateful to anyone who can assist.
Update:
Okay, got things working again. I was trying to jump from ICS to Kitkat ROM and I think it was too big a jump. I loaded a CM 10.1.3 JB ROM and it loaded fine. I will try this Kitkat ROM after I get things running smoothly on 10.1.3.
Hi. there is a problem on 24/01/2015 version, skype force closes when i start calling. (sorry for my bad english).
Hi guys,
This rom works on GT-p3110 ????
foxbtp said:
Hi guys,
This rom works on GT-p3110 ????
Click to expand...
Click to collapse
No sir.....P5110 and P511x.
Hi, I've just installed your latest build, but I have an issue with skype: when I try to make a call, the app exit without explanation... I've also installed fixes for camera and video playback. The ROM is very smooth and I really like it, but I really need skype too
EDIT:
Found a solution! If you use this modded version it works well without issues : http://forum.xda-developers.com/showpost.php?p=52085391&postcount=3404
Thank you for this awesome ROM
belpingu said:
After installing the 31.01.2015 update video in youtube stopped showing. It shows grey with glitchy squares instead. Installing dhollmen blobs did not help.
Click to expand...
Click to collapse
Hey folks!
I got the same issues with the YouTube app. I can't really say since what version... I'm now on 20150321, dirty flashed on my p5110. Any hints on how to solve this. If possible I would like to avoid wiping everything and doing a clean install...
Reboot to get showbox playing again?
Hi all,installed cm11 4.4.4 with v2 fixer,but whenever I pause a film watching via Showbox app,the app will crash and the only way to get the film playing again,is by a reboot.
Any ideas why or a fix please?
Hi all,just want to sey thank you for a great rom,runing your last build and everything
works fine,camera,you tube no problems so far. Thank you
AS the name implies this is a stock rooted Android 5.0.1 Lollipop ROM!
The one we have been waiting for!
Features
100% Stock
Rooted
Busybox
No other edits
FSTRIM on install
Powered by SuperSU
Notes:
Should update bootloader. It is attached as a ZIP file but is not flashable! You need to fastboot flash it. For those in windows I have batch file in there along with ADB and fastboot.
First boot is a loooooooooooong time! About 5 to 7 minutes!
You must be on TWRP 2.8.1.0+ for this ROM to Flash properly!
Troubleshooting
If you get no status bar reboot to recovery and clear all cache. If that doesnt work try flashing the factory image then flash TWRP again and then this ROM.
Getting Symlinks failed during install? Make sure /system is unchecked in TWRP mounts
Problems with internal storage? Look at THIS POST for fix by @freakzapster
Root not working right? Flash newer SuperSU by @Chainfire but play store update should be fine!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Please hit the Thanks button! Its easy to do and you will feel better for doing it!
Download HERE!
Sharing Policy
You are free to use this ROM or any part of this ROM any way you like as long as you give proper credit!
Consider this your permission! Please do not PM me asking if its OK to build off this ROM. Permission granted!
Remember to give proper credit!
Hit Thanks!
Let me know what you guys think... They changed some things around and I am "semi" anticipating problems. Obviously I had zero testing time beings I started on it as soon as I got out of work and upload it after a very minimal function test: Play Store, Hangouts, GPS, Maps and that was it.
Let me know if you see any issues.
Well that was fast!
Apart from updated binaries any other noticeable changes?
Thanks! Been waiting for this one ☺.
You mention in OP updating bootloader- what version is required? Say I'm on ver 4.02, do I need to update it?
Downloading now...
MoonBlade said:
Well that was fast!
Apart from updated binaries any other noticeable changes?
Click to expand...
Click to collapse
I "think" I see more eyecandy animation but cant say for sure. As I noted above I had very little time to play.
jaibar said:
Thanks! Been waiting for this one ☺.
You mention in OP updating bootloader- what version is required? Say I'm on ver 4.02, do I need to update it?
Downloading now...
Click to expand...
Click to collapse
Sorry... I put the bootloader in the op and you should be on 4.04.
You can prolly get buy with 4.02, many people did on the initial 5.0.0. release.
scrosler said:
Let me know what you guys think... They changed some things around and I am "semi" anticipating problems. Obviously I had zero testing time beings I started on it as soon as I got out of work and upload it after a very minimal function test: Play Store, Hangouts, GPS, Maps and that was it.
Let me know if you see any issues.
Click to expand...
Click to collapse
I'm at "Android is upgrading", so dirty flash over 5.0 rooted stock seems to have worked OK.
just lou said:
I'm at "Android is upgrading", so dirty flash over 5.0 rooted stock seems to have worked OK.
Click to expand...
Click to collapse
Yeah, I only tested it on a fresh install so... by all means share the update experience.
Im "Clean" install kinda guy
scrosler said:
Yeah, I only tested it on a fresh install so... by all means share the update experience.
Im "Clean" install kinda guy
Click to expand...
Click to collapse
Normally me too , but I figured since it was only a minor update and I was already running the same stock 5.0.0 ROM I'd give it a try. Eveything seems fine so far. No issues at all yet.
Flashed ROM , works great. Ty scrosler
Edit: Sadly tons of 3rd party apps still haven't been updated for Lollipop even after almost 1 month since it was released. Minion Rush and Dead Trigger 2 still work like I have a 2009 device. It's the app's fault or Lollipop's hardware acceleration or memory management, but I am 80% sure that it's because those apps haven't been updated. They work fine for 2 seconds then another 2-3 seconds they go into slow motion mode and sadly I have to go back to KK until this is fixed
Dirty flashed over stock rooted 5.0.0... No issues... And no noticeable differences between both, so far.
Are there any problems if we use CWM instead of TWRP? I'm not a TWRP kid of guy...
Thanks.
So it looks like YouTube mediaplayer is fixed and (at last!) volume control on animated gifs in Instagram works properly (previously it was changing notifications level not media). Hopefully WiFi connection will be also stable but this needs a longer testing.
TY scrosler.
Ok, flashed one hour ago, maked the wipes and all pretty smooth here.
Scott youre the master! As always
Running perfect, but I didn't have a problem with 5.0 either.
If this fixes YouTube I'll be pleased as punch :thumbup::thumbup:
Constant restarts were getting annoying
mr. phillip said:
Dirty flashed over stock rooted 5.0.0... No issues... And no noticeable differences between both, so far.
Click to expand...
Click to collapse
Any battery improvements or anything?
Sent from my Nexus 7 using Tapatalk
Maybe be placebo efect like Scott said... but, I think the animations are a bit better more detailed... I dont know I always use animations in 0.5x... Maybe they had improved...
nikkifm said:
Any battery improvements or anything?
Sent from my Nexus 7 using Tapatalk
Click to expand...
Click to collapse
Battery lasts for around 10 days with this specific firmware version for me. It's amazing :angel:
pardinha said:
Are there any problems if we use CWM instead of TWRP? I'm not a TWRP kid of guy...
Thanks.
Click to expand...
Click to collapse
I dirty flashed this with PhilsTouch....no issues whatsover....
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Cyanogenmod 12 Semi-NightliesThese Nightlies are based off of Cyanogenmod 12 packages for the D801 (T-Mobile) with a compatible lollipop D800 Kernel.
To Install:
1. Download the Zip file to your phone, or put it in your phone from your computer
2. Get into recovery. You must be rooted to run this ROM, open Terminal on your phone and enter the following:
su
reboot recovery
3. You should have TWRP. Select wipe!
4. Click install and find the zip, click on it, and wait for magic to happen.
5. Install other needed zips
6. Reboot system
7. Enjoy!
8. To flash updates you can disregard step 3. (Wipe)
9. DO NOT UPDATE THESE OTA, DO NOT!
Working:
Everything seems to be working as of now, test and be sure to report to CM too! As the T-Mobile users may be having the same issues.
Not Working:
Again, Test and post results!
Download:
Sorry, I print the date in US Standard format.
2/21/2015:CM-12-20150221-D800
2/25/2015:CM-12-20150225-D800
3/2/2015:CM-12-20150302-D800
3/9/2015:CM-12-20150309-D800
3/13/2015:CM-12-20150313-D800
3/16/2015:CM-12-20150316-D800
MD5 Checksum for 3/16/2015:
HTML:
0b587617818071282e6e3be0f2169c02
Also Check here:
http://androidguruguy.blogspot.com/2015/02/lg-g2-at-d800-cyanogenmod-semi-nightlies.html
Cyanogenmod 12 OFFICIAL starting 03/21/15 (Via Dr4stic)
Cyanogenmod.org page for D800
More Info:
Be sure to download Chainfire's SuperSU Beta zip, and Gapps!
Chainfire's SuperSU Beta Download
Changelog for this build:
3/2/2015 - Vanir 2/7/15 Kernel
3/9/2015 - Paranoid Kernel for the D800
3/13/2015 - Back to Vanir, 3/13/2015 Kernel
Thanks:
Vanir for Kernel work
Chainfire for Root, SuperSU
Paranoid for GAPPS.
Thank you!! I am loving it!! You made my day!!
I am rather new to G2, and had been tinkering with root, recovery, custom roms, etc over the weekend, but was a little sad that there no lollipop roms yet, not even stock. Then this came up, and I had to try it.
I reverted my G2 back to D80010d (jelly bean), rooted (via ioroot), installed TWRP recovery (via freegee), and then did a clean install of this Cyanogenmod 12. Everything seems to be working great. System seems stable, all the apps work as they should, all the customizable options are working, and lollipop feels just smooth and clean to boot. Absolutely loving it!
Many many thanks!! This is a God-send!!
Thanks very much! Works like a charm. Everything is working on my D800.
Been running the 2/13/15 CM12 for the D802 with the B1akbird kernel and it's been really good as a daily driver. Will download this one and see how it goes. Thanks a lot.
I assume this is the SuperSU you are referring to, http://forum.xda-developers.com/apps/supersu/2014-09-02-supersu-v2-05-t2868133.
Jnn1 said:
Thank you!! I am loving it!! You made my day!!
I am rather new to G2, and had been tinkering with root, recovery, custom roms, etc over the weekend, but was a little sad that there no lollipop roms yet, not even stock. Then this came up, and I had to try it.
I reverted my G2 back to D80010d (jelly bean), rooted (via ioroot), installed TWRP recovery (via freegee), and then did a clean install of this Cyanogenmod 12. Everything seems to be working great. System seems stable, all the apps work as they should, all the customizable options are working, and lollipop feels just smooth and clean to boot. Absolutely loving it!
Many many thanks!! This is a God-send!!
Click to expand...
Click to collapse
Just a heads up, check out the LG G2 development and the G2 original development threads as many LP rom builds are posted there which are built for all G2 variants, including D800.
Sorry OP for pointing to other threads in yours, but I just want to ensure that those new to the G2 experience everything.
bps119 said:
Just a heads up, check out the LG G2 development and the G2 original development threads as many LP rom builds are posted there which are built for all G2 variants, including D800.
Sorry OP for pointing to other threads in yours, but I just want to ensure that those new to the G2 experience everything.
Click to expand...
Click to collapse
Thank you! Glad to know and excited to see there are many more options, like Vanir, Omni, Cloudy, etc. But if I'm not mistaken, it seems like the Cyanogenmod 12 in that forum has ceased development, stuck on Dec 27, 2014.
I'm very much loving this Cyanogenmode 12 for D800, so I do very much hope development of this rom will be kept up, hopefully becoming official like the Cy 11. I'm more than willing to donate to help too.
Thanks again to OP and bps119!
bps119 said:
Just a heads up, check out the LG G2 development and the G2 original development threads as many LP rom builds are posted there which are built for all G2 variants, including D800.
Sorry OP for pointing to other threads in yours, but I just want to ensure that those new to the G2 experience everything.
Click to expand...
Click to collapse
It's no problem thats what I'm all about!
jkassay said:
Thanks very much! Works like a charm. Everything is working on my D800.
Click to expand...
Click to collapse
Edit:
Day 3 and still working fine. Tried all of the others in the LG G2 forum, this one is the best lollipop to date.
Is anyone having issues with connecting their phone to their computer? I'm trying to access the USB connection menu on my phone and it just refreshes the Storage screen. The phone isn't even detected on the computer at all.
harrr0 said:
Is anyone having issues with connecting their phone to their computer? I'm trying to access the USB connection menu on my phone and it just refreshes the Storage screen. The phone isn't even detected on the computer at all.
Click to expand...
Click to collapse
Try turning off USB debugging (turn off developer options), you should then be able to see your storage partition.
Working well for me so far! The other CM12 I couldnt get to work 100% for me but everything seems to be working well. Still installing all of my old stuff so I will post if some negatives popup.
lemonboi5 said:
Opening Post
Click to expand...
Click to collapse
Hi, i had downloaded everything on your list, but have some questions:
i'm on stock rom 4.4.2 d80020k rooted with TWRP, cant remember if i have a custom kernel (dont think so, any way to check out?), i'm good to flash it?
do i have to flash it like this: Cm12->SU->Gapps? or CM12->Restart,->SU->Restart, Gapps->done?
thanks on advance
Gemc666 said:
Hi, i had downloaded everything on your list, but have some questions:
i'm on stock rom 4.4.2 d80020k rooted with TWRP, cant remember if i have a custom kernel (dont think so, any way to check out?), i'm good to flash it?
do i have to flash it like this: Cm12->SU->Gapps? or CM12->Restart,->SU->Restart, Gapps->done?
thanks on advance
Click to expand...
Click to collapse
The Kernel will be included in the CM12 Package, You will be upgrading to 5.0.2 so anything 4.4.2 related will not be there besides basebands, and bootloader.
Flash like this: CM12>Gapps>SU, then Restart. (I don't think the order matters after CM12, but thats what I recommend) :good:
Enjoy
MMS
I decided to try this ver of cm12 after going 5 months full stock. I'm glad I did, its allmost flawless. The only problem I'm encountering is MMS. Can't send pictures and not sure if I can receive. I'm on the latest build in this post. Otherwise its sweet!!:highfive:
nebula37 said:
I decided to try this ver of cm12 after going 5 months full stock. I'm glad I did, its allmost flawless. The only problem I'm encountering is MMS. Can't send pictures and not sure if I can receive. I'm on the latest build in this post. Otherwise its sweet!!:highfive:
Click to expand...
Click to collapse
Make sure the APN settings in mobile networks is set right! Mine uses wap.cingular flawlessly
Sent from my LG-D801 using XDA Free mobile app
lemonboi5 said:
Make sure the APN settings in mobile networks is set right! Mine uses wap.cingular flawlessly
Sent from my LG-D801 using XDA Free mobile app
Click to expand...
Click to collapse
The attlte APN also sends mms, just not when connected to WiFi
Thanks! Update Procedure?
Thank you very much for the 5.0.2! My wife appreciates it.
I have just installed the 25 Feb clean (wipe everything) and want to know how to update when you release a new load.
GHammer said:
Thank you very much for the 5.0.2! My wife appreciates it.
I have just installed the 25 Feb clean (wipe everything) and want to know how to update when you release a new load.
Click to expand...
Click to collapse
I'm working on an OTA app. Either that or a portable flashable kernel for 801 updates
Sent from my LG-D801 using XDA Free mobile app
D800
lemonboi5 said:
I'm working on an OTA app. Either that or a portable flashable kernel for 801 updates
Sent from my LG-D801 using XDA Free mobile app
Click to expand...
Click to collapse
801 updates? But, I have a D800.
Doesn't matter the method to me personally. I just wouldn't want to have to wipe her phone each time there is an update.
Working beautifully for her I might add!
GHammer said:
801 updates? But, I have a D800.
Doesn't matter the method to me personally. I just wouldn't want to have to wipe her phone each time there is an update.
Working beautifully for her I might add!
Click to expand...
Click to collapse
Right, I do too but I'm using D801's CM updates and modifying it for the d800. You can dirty flash the updates for this ROM! (Install without wipe)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
First off I have no intention at all of taking over this project. Wanted to share this working build without hijacking someone elses thread. Based on the original work of @squid2 for Perry and @SeanStar for Owens I have fixed/tweaked a few things so you all can keep your devices running up to date and stable. It will work even after the taking latest stock ota updates or flashing the latest firmware. I'll keep this updated at least once a month until hopefully the original dev releases something better.
Known working:
Booting
Graphics and video playback
RIL
Connecting to GSM (not for XT1766 which is CDMA only) and CDMA networks, calls, and data (LTE, 3G) (Supporting US and Canada carriers only)
Fingerprint sensor (Sprint models don't have this)
Camera
Audio
WiFi
Sensors
GPS
FM Radio
Untested or possibly broken
CM Actions removed
Changelog:
Code:
11-17-2018-
-All audio now working.
-Fixed cdma data/LTE. Works on first boot without any additional fixes.
-Added missing firmware symlinks to fix data after latest stock radio updates.
-Added correct device specific power_profile.xml.
-Changed governor settings to closer reflect stock values and balance out performance and battery life.
-Probably a few other things I'm forgetting.
11-19-2018-
-FM Radio really fixed now
Sources
[url]https://github.com/LineageOS[/URL]
[url]https://github.com/JasonM45/android_device_motorola_perry[/URL]
[url]https://github.com/JasonM45/android_device_motorola_msm8937-common[/URL]
[url]https://github.com/JasonM45/android_device_motorola_qcom318-32[/URL]
[url]https://github.com/JasonM45/proprietary_vendor_motorola[/URL]
[url]https://github.com/JasonM45/android_kernel_motorola_msm8937[/URL]
Downloads:
May not work with XT1766 Sprint/Boost CDMA devices trying to use GSM networks especially in another region! I do not support this! Please don't complain to me about it here!
November 19 2018 Stable Build
ROM Information
LineageOS 14.1 for Moto E4 Qualcomm, ROM for the Moto E4
Contributors
Jason M., SeanStar, squid2, Alberto97,
Big thanks to:
bcrichster, and
jasonmerc
for testing my trees and helping find a couple derps I made and making sure everything is buildable and working.
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.x
Version Information
Status: Stable
Created 2018-11-17
Last Updated 2018-11-19
Jason M. said:
First off I have no intention at all of taking over this project. Wanted to share this working build without hijacking someone elses thread. Based on the original work of @squid for Perry and @SeanStar for Owens I have fixed/tweaked a few things so you all can keep your devices running up to date and stable. It will work even after the taking latest stock ota updates or flashing the latest firmware. I'll keep this updated at least once a month until hopefully the original dev releases something better.
Click to expand...
Click to collapse
Excellent post - including attributions. Thanks for your numerous contributions supporting this device and maintaining the high standards expected of every XDA member.
Nice. Keeping the e4 alive.
madbat99 said:
Nice. Keeping the e4 alive.
Click to expand...
Click to collapse
Trying. It's a good phone. Don't want to see everyone abandon it and go by a new one before @squid2 finishes doing his thing.
Jason M. said:
Changelog:
Code:
11-17-2018-
-All audio now working.
-Fixed cdma data/LTE. Works on first boot without any additional fixes.
-Added missing firmware symlinks to fix data after latest stock radio updates.
-Added correct device specific power_profile.xml.
-Changed governor settings to closer reflect stock values and balance out performance and battery life.
-FM radio working.
-Probably a few other things I'm forgetting.
Click to expand...
Click to collapse
I do not see an FM radio app. How do I get it working?
Thanks!
mn1968 said:
I do not see an FM radio app. How do I get it working?
Thanks!
Click to expand...
Click to collapse
I'm not sure why. I'll take a look but I'm pretty sure all the FM radio stuff is in the qcom318-32 tree so I thought since it's working on my E4 plus it was on perry also. I had someone testing on perry who was also asking for that working and I was under the impression it was working, but I'll check it out asap.
Edit: I'm sorry. My testers didn't say anything and I just looked again and see what's wrong. I'll have another build up that should have it working in a few hrs or so. I apologize, I've got a baby coming on the 26th on the brain.
@mn1968 flash this zip. It should get the FM radio working for you. Let me know please.
Sim card is not detected
Mian123456789 said:
Sim card is not detected
Click to expand...
Click to collapse
If you were patient and waited a fee minutes or so you should have data. If it doesn't work let me know and I'll remove it.
Edit: I've had numerous users test it that told me it works
Jason M. said:
If you were patient and waited a fee minutes or so you should have data. If it doesn't work let me know and I'll remove it.
Edit: I've had numerous users test it that told me it works
Click to expand...
Click to collapse
I have waited but it is not detecting sim card i inserted another sim card and restart but during boot the mobile vibrates and stuck in boot loop
Mian123456789 said:
I have waited but it is not detecting sim card i inserted another sim card and restart but during boot the mobile vibrates and stuck in boot loop
Click to expand...
Click to collapse
What model do you have and what carrier are you trying to use with it?
Mian123456789 said:
Sim card is not detected
Click to expand...
Click to collapse
Jason M. said:
If you were patient and waited a fee minutes or so you should have data. If it doesn't work let me know and I'll remove it.
Edit: I've had numerous users test it that told me it works
Click to expand...
Click to collapse
Sim is recognized for me. APN correctly auto-configured as well. I have the US Cellular XT1768 - using with AT&T Tracfone.
Jason M. said:
@mn1968 flash this zip. It should get the FM radio working for you. Let me know please.
Click to expand...
Click to collapse
Thanks! Wasn't looking for you to fix this ASAP...was more just curious. I have downloaded and will test when I get time.
Jason M. said:
What model do you have and what carrier are you trying to use with it?
Click to expand...
Click to collapse
I have moto e4 xt1766 and carrier sprint
Mian123456789 said:
I have moto e4 xt1766 and carrier sprint
Click to expand...
Click to collapse
Didn't you say you were trying to use it on a gsm network?
https://forum.xda-developers.com/mo...-sim-unlock-hidden-menu-t3650622/post78200314
Mian123456789 said:
I have moto e4 xt1766 and carrier sprint
Click to expand...
Click to collapse
If your trying to use it with Sprint or Boost in the US it should work. You said you tried another sim card. Let me guess, your trying to use it on a GSM network in India or something like this user
https://forum.xda-developers.com/mo...mm-sprint-perry-service-t3862210?goto=newpost
Jason M. said:
If your trying to use it with Sprint or Boost in the US it should work. You said you tried another sim card. Let me guess, your trying to use it on a GSM network in India or something like this user
https://forum.xda-developers.com/mo...mm-sprint-perry-service-t3862210?goto=newpost
Click to expand...
Click to collapse
Yes i am trying to use it on gsm in pakistan.Is it possible?
Mian123456789 said:
Yes i am trying to use it on gsm in pakistan.Is it possible?
Click to expand...
Click to collapse
It's not supposed to be but I'll try to make it work. I'm making another build without all the CDMA LTE fixes and hopefully it will work. I'm not sure I even want to do this but I'll try. I don't get why people think a CDMA phone bought in the US will work on GSM. As soon as it's done and uploaded I'll post a link.
Jason M. said:
It's not supposed to be but I'll try to make it work. I'm making another build without all the CDMA LTE fixes and hopefully it will work. I'm not sure I even want to do this but I'll try. I don't get why people think a CDMA phone bought in the US will work on GSM. As soon as it's done and uploaded I'll post a link.
Click to expand...
Click to collapse
Thanks for your effort i can test it for you
Great work!!! Do you have a local manifest that I can use to build this myself?
Thanks.
Also I have a issue on my current lineage 14.1 perry build that all call audio is through the speaker and is very loud.
Any idea for quick fixes? I checked the mixer_paths and other 2 xml files in /system/etc and they look right.
Any ideas?
greatjack1 said:
Great work!!! Do you have a local manifest that I can use to build this myself?
Thanks.
Also I have a issue on my current lineage 14.1 perry build that all call audio is through the speaker and is very loud.
Any idea for quick fixes? I checked the mixer_paths and other 2 xml files in /system/etc and they look right.
Any ideas?
Click to expand...
Click to collapse
My build posted in the op? If so, there is one audio file I can try adding. Actually, here's a zip you can try flashing.
Edit: manifest
https://github.com/JasonM45/perry_local_manifest/blob/jasonm45/roomservice.xml
If your running someone else's build which I'm pretty sure you are because I fixed that problem you'll need to flash the zip titled E4_audio_fix