Database Info

Bricked ur tipo/Problem in rooting/Want help on any topic Post Here!!!

Hi every one want help on ur Bricked tipo Or
Problem with Rooting or any thing u are facing
Feel Free and post here
I or any member might help You....
Xperia Miro And Xperia j users are also invited
Good Luck..:good:

help
hi all in my last thread friends in forum post to my questional thread the offical sony xperia tipo dual ftf i dawnload it
2nd: my phone dos'nt fast boot or flash mode if i connect usb + prees volume- no thing done please help me

cannot boot after unlock bootloader and flashing
i have a problem with booting my tipo ,i want to update with cm10 so i unlock boot loader with android sdk manager and after that flash it with this code "fastboot flash boot boot.img" and then "fastboot reboot" everything gone in fine result . but phone didn't reboot . only once i use power key it vibrate and indicate green led and nothing happen . and then no other things are working after remove battery and connect it i am able to use it with power key, flash mode and fastboot key. but do not able to reboot it .
i think it happen because i unlock bootloader and did not reboot it and flash it in that step ..
plz help me with this..

rinkumeher said:
i have a problem with booting my tipo ,i want to update with cm10 so i unlock boot loader with android sdk manager and after that flash it with this code "fastboot flash boot boot.img" and then "fastboot reboot" everything gone in fine result . but phone didn't reboot . only once i use power key it vibrate and indicate green led and nothing happen . and then no other things are working after remove battery and connect it i am able to use it with power key, flash mode and fastboot key. but do not able to reboot it .
i think it happen because i unlock bootloader and did not reboot it and flash it in that step ..
plz help me with this..
Click to expand...
Click to collapse
Which build fxp are you using? Get latest, and use flashtool to fastboot kernel this time.
Some fxp build have boot.img problem.
Sent from my ST27i

joehoor said:
hi all in my last thread friends in forum post to my questional thread the offical sony xperia tipo dual ftf i dawnload it
2nd: my phone dos'nt fast boot or flash mode if i connect usb + prees volume- no thing done please help me
Click to expand...
Click to collapse
Switch off ur phone hold volume down and connect to pc ..(while holding volume-)..To enter in
Flashmode also sometime it take 2-3 time to connect
Did u get green notification light on ur phone..
Tell me If u get green light I will help u further.. .
If u donot get green light than what u r getting..

rinkumeher said:
i have a problem with booting my tipo ,i want to update with cm10 so i unlock boot loader with android sdk manager and after that flash it with this code "fastboot flash boot boot.img" and then "fastboot reboot" everything gone in fine result . but phone didn't reboot . only once i use power key it vibrate and indicate green led and nothing happen . and then no other things are working after remove battery and connect it i am able to use it with power key, flash mode and fastboot key. but do not able to reboot it .
i think it happen because i unlock bootloader and did not reboot it and flash it in that step ..
plz help me with this..
Click to expand...
Click to collapse
Flash stock ftf first and then flash boot.IMG through flashtool of latest fxp205 and through cwm flash fxp Rom
Wipe data and cache.......
This method worked for me..

i try unlock bootloader but when i type this command "fastboot.exe -i 0x0fce getvar version" i don't take any response and i have the following message "waiting for device".

tassosmer said:
i try unlock bootloader but when i type this command "fastboot.exe -i 0x0fce getvar version" i don't take any response and i have the following message "waiting for device".
Click to expand...
Click to collapse
It is due to because ur drivers are not installed properly
See in device manager on ur pc if there is exclamation mark on ur device
If ur drivers are installed correctly than u can try this out
This method http://forum.xda-developers.com/showthread.php?t=1560613 is easy and there is no need of cmd etc:laugh:
By this u can unlock ur bootloader easily

no ting done
nishuy21 said:
Switch off ur phone hold volume down and connect to pc ..(while holding volume-)..To enter in
Flashmode also sometime it take 2-3 time to connect
Did u get green notification light on ur phone..
Tell me If u get green light I will help u further.. .
If u donot get green light than what u r getting..
Click to expand...
Click to collapse
no thing done or no light or nothing happens if i turn power only 3 led red lights !!:crying:

nishuy21 said:
It is due to because ur drivers are not installed properly
See in device manager on ur pc if there is exclamation mark on ur device
If ur drivers are installed correctly than u can try this out
This method http://forum.xda-developers.com/showthread.php?t=1560613 is easy and there is no need of cmd etc:laugh:
By this u can unlock ur bootloader easily
Click to expand...
Click to collapse
I tried this program yesterday but when i click "unlock BL" the program crashes.

joehoor said:
no thing done or no light or nothing happens if i turn power only 3 led red lights !!:crying:
Click to expand...
Click to collapse
Try on other USB ports
Try it with other USB data cable..
Try seus to repair ur phone if still can not
Then I'm afraid u have some hardware problem and u should go to Sony service centreAnd the problem can be of ur pc try on
Other pc if problem persist than bad luck u need to go to SC
Also try to disabe all USB ports and than enable them again in device manager on pc and reboot...
Good luck and tell us further more....

tassosmer said:
I tried this program yesterday but when i click "unlock BL" the program crashes.
Click to expand...
Click to collapse
I looked a bit at ur problem and this is with many other people
And all of them donot have fastboot mode driver installed correctly
click on the start menu, then right click on my computer, then click on manage from the drop down list, then in the window that pops up on the left hand side click on device manager.if u see unknown source or exclamation mark when u connect ur device
U can see this link http://forums.androidcentral.com/ve...ock-bootloader-root-verizon-galaxy-nexus.html for more description although it is for nexus but the process is same
Scroll down and see troubleshooting it might help u
Than ur drivers are not installed correctly
If drivers are installed than u must got a name like adb interface/bridge etc.
If this does not work than
Same as I said in above post
This problem can be caused by ur pc try this on any other pc
And install fastboot drivers or even u can use different USB ports some time USB ports donot work properly

Thank you for your advice. I did it. Now I face a big problem and i am terrified. I tried install fxp 205 but i made a mistake and my tipo doesn't work. My pc can't recognize it, so i can't flash ftf via flashtool. Please if you can help me!

tassosmer said:
Thank you for your advice. I did it. Now I face a big problem and i am terrified. I tried install fxp 205 but i made a mistake and my tipo doesn't work. My pc can't recognize it, so i can't flash ftf via flashtool. Please if you can help me!
Click to expand...
Click to collapse
What mistake have u done
Well can u enter flashmode I.e green notification light on tipo when u connect it
To pc with vol-
If it enters it is softbricked but if not
U are hard bricked no chance else repairing at service centre
If soft bricked still pc does not recognize see above post...

nishuy21 said:
What mistake have u done
Well can u enter flashmode I.e green notification light on tipo when u connect it
To pc with vol-
If it enters it is softbricked but if not
U are hard bricked no chance else repairing at service centre
If soft bricked still pc does not recognize see above post...
Click to expand...
Click to collapse
No, I can't do anything. I tried put phone to charge but nothing happened. i think that i made a hard brick. I entered to fastboot and i chose via flashtool to put boot.img but suddenly the phone turned off.

rinkumeher said:
i have a problem with booting my tipo ,i want to update with cm10 so i unlock boot loader with android sdk manager and after that flash it with this code "fastboot flash boot boot.img" and then "fastboot reboot" everything gone in fine result . but phone didn't reboot . only once i use power key it vibrate and indicate green led and nothing happen . and then no other things are working after remove battery and connect it i am able to use it with power key, flash mode and fastboot key. but do not able to reboot it .
i think it happen because i unlock bootloader and did not reboot it and flash it in that step ..
plz help me with this..
Click to expand...
Click to collapse
i am using cm10 fxp203
---------- Post added at 11:33 PM ---------- Previous post was at 11:20 PM ----------
nishuy21 said:
Flash stock ftf first and then flash boot.IMG through flashtool of latest fxp205 and through cwm flash fxp Rom
Wipe data and cache.......
This method worked for me..
Click to expand...
Click to collapse
thanks but i had deposit my cell in service center they told me that os is not detecting so they will replace motherboard of my cell, let see what will happen next whether they will charge me or not. bless luck for me

rinkumeher said:
i am using cm10 fxp203
---------- Post added at 11:33 PM ---------- Previous post was at 11:20 PM ----------
thanks but i had deposit my cell in service center they told me that os is not detecting so they will replace motherboard of my cell, let see what will happen next whether they will charge me or not. bless luck for me[/QUOTE
As long as you unlocked bootloader you lost warranty. Tomorrow i will go for bigger problem. I hope that the cost won't be too much.
Click to expand...
Click to collapse

tassosmer said:
No, I can't do anything. I tried put phone to charge but nothing happened. i think that i made a hard brick. I entered to fastboot and i chose via flashtool to put boot.img but suddenly the phone turned off.
Click to expand...
Click to collapse
Be sure if ur phone is hardbricked sometimes it looks like but it is not
If hard bricked.......
Go to Sony service centre and there is also one thing I have heard about
"Jtag" it can unbrick many hard bricked phones at very low cost...
Go for it if it is available in ur country..
Better luck next time

nishuy21 said:
Be sure if ur phone is hardbricked sometimes it looks like but it is not
If hard bricked.......
Go to Sony service centre and there is also one thing I have heard about
"Jtag" it can unbrick many hard bricked phones at very low cost...
Go for it if it is available in ur country..
Better luck next time
Click to expand...
Click to collapse
The only life sign of tipo is the vibration when i turn it on. This happened once today and once yesterday night.

I need driver's download link for xperia
Tipo please
Sent from my ST21i using xda app-developers app

[Q] How to flash stock rom/firmware on a bricked Xperia C?

After moded my xperia c to add bravia engine, I was stuck on boot animation. The phone was not in USB debugging mode since I was trying to mod it after a recent software update using sony pc companion. Tried flastool, SP Flashtool, SUS & Pc companion to repair it but everything just don't work. Is there any other way to repair it other than sending it to service centre?

ffederick said:
After moded my xperia c to add bravia engine, I was stuck on boot animation. The phone was not in USB debugging mode since I was trying to mod it after a recent software update using sony pc companion. Tried flastool, SP Flashtool, SUS & Pc companion to repair it but everything just don't work. Is there any other way to repair it other than sending it to service centre?
Click to expand...
Click to collapse
i think chauhan jayc too faced a similar brick.. he couldnt get it rocking back.. had to go service center.. maybe he can shed more info on that..

ffederick said:
After moded my xperia c to add bravia engine, I was stuck on boot animation. The phone was not in USB debugging mode since I was trying to mod it after a recent software update using sony pc companion. Tried flastool, SP Flashtool, SUS & Pc companion to repair it but everything just don't work. Is there any other way to repair it other than sending it to service centre?
Click to expand...
Click to collapse
Have you tried the "repair my phone/tablet" option on the pc companion? if not try it. it worked for me. turn-off your xperia c. make sure it's turned-off. open sony pc companion. connect your phone to your pc via usb. click on the start button on the support zone box/tab. click start on the phone/tablet software update. click the "repair my phone/tablet" link. the blue text with an underline. follow the onscreen instruction.

Try Sony Update Centre.. Just make sure your fastboot & flashboot drivers are properly
Sent from Xperia S LT26i
Hit Thanks if I was helpful to you..

varunpilankar said:
Try Sony Update Centre.. Just make sure your fastboot & flashboot drivers are properly
Sent from Xperia S LT26i
Hit Thanks if I was helpful to you..
Click to expand...
Click to collapse
rikardo03 said:
Have you tried the "repair my phone/tablet" option on the pc companion? if not try it. it worked for me. turn-off your xperia c. make sure it's turned-off. open sony pc companion. connect your phone to your pc via usb. click on the start button on the support zone box/tab. click start on the phone/tablet software update. click the "repair my phone/tablet" link. the blue text with an underline. follow the onscreen instruction.
Click to expand...
Click to collapse
I had tried both of your suggestion but unfortunately it does not work for me. I end up sending it to Sony service centre yesterday. Finger crossed now and hope for the best.

just got my xperia c today from sony service centre. luckily they did not know I had rooted my phone and they did not charge me for repairing it. :victory:

sorry for being late
and i know op has got his phone repaired
but this is for the future usage
if any one who stuck at boot logo or any where and wants to reflash firware using sony tool
follow below steps
as our phone's batter is non removable its quite odd but once u understand its easy
first understand this
to use sony tool we have to connect our phone in flash mod to pc
and
and to do so remove back cover and connect your phone in any mod with pc via usb cable
and then press hardreset button
so that your phone will reboot and connect in charging mod
now remove data cable so your phone will turn off
now that your phone is turn off every thing is done
you just need to sony update tool open it and connect your phone in flash mod
and taadaa
its done :victory:

rikardo03 said:
Have you tried the "repair my phone/tablet" option on the pc companion? if not try it. it worked for me. turn-off your xperia c. make sure it's turned-off. open sony pc companion. connect your phone to your pc via usb. click on the start button on the support zone box/tab. click start on the phone/tablet software update. click the "repair my phone/tablet" link. the blue text with an underline. follow the onscreen instruction.
Click to expand...
Click to collapse
Thanks bro...this worked for me. i too install engine bravia but stuck at animation boot. i try to flash using flashtool but doesn't work. i try this method and worked awsome.:good:

i was updating the new firmware then my phone restarted and stuck at SONY logo , i tried wipe cache , data factory reset but its useless , my phone still stuck at sony logo . i tried to connect pc companion to repair but it cant install firmware . can you help me

Korris said:
i was updating the new firmware then my phone restarted and stuck at SONY logo , i tried wipe cache , data factory reset but its useless , my phone still stuck at sony logo . i tried to connect pc companion to repair but it cant install firmware . can you help me
Click to expand...
Click to collapse
have you got the solution ?

help
chauhanjayc said:
have you got the solution ?
Click to expand...
Click to collapse
i edited build.prop build_release_version 4.2 to 4.4. and now stuck on sony animation looping. on "pc companion" repair phone/tablet not working, its shows "no new update for that phone".... help how to recover??

n2roy said:
i edited build.prop build_release_version 4.2 to 4.4. and now stuck on sony animation looping. on "pc companion" repair phone/tablet not working, its shows "no new update for that phone".... help how to recover??
Click to expand...
Click to collapse
here you go dwnload &follow this steps

Xenon1978 said:
here you go dwnload &follow this steps
Click to expand...
Click to collapse
hope it will work, cause im googling over 3 days.

n2roy said:
hope it will work, cause im googling over 3 days.
Click to expand...
Click to collapse
yes it will work.
Ihave done this many times while deodexing my rom

not working , I.ve got this mgs
"no update avialable"
maybe because of I edited build.prop. any other sollution???
View attachment 2630218

n2roy said:
not working , I.ve got this mgs
"no update avialable"
maybe because of I edited build.prop. any other sollution???
View attachment 2630218
Click to expand...
Click to collapse
try this method
Or try this

Xenon1978 said:
try this method
Or try this
Click to expand...
Click to collapse
i already tried on
1. Pc companion (error: no new update avialable for your phone),
2. EMMA (error: bootloader locked)
may be there is a chance for flashing with flashtool , where to get sony xperia c firmware (.ftf) file?
** may be one big chance is restore original build.prop with CWM using update.zip.
** my xperia came with "android recovery 3e " and its all time shows "installation aborted" with update.zip file........... so do u know how to install CWM with flash boot or any other way???

n2roy said:
i already tried on
1. Pc companion (error: no new update avialable for your phone),
2. EMMA (error: bootloader locked)
may be there is a chance for flashing with flashtool , where to get sony xperia c firmware (.ftf) file?
** may be one big chance is restore original build.prop with CWM using update.zip.
** my xperia came with "android recovery 3e " and its all time shows "installation aborted" with update.zip file........... so do u know how to install CWM with flash boot or any other way???
Click to expand...
Click to collapse
no there is cwm as for now cause few here have already soft bricked including me & also u can't flash using flash tool

sorry for being late
and i know op has got his phone repaired
but this is for the future usage
if any one who stuck at boot logo or any where and wants to reflash firware using sony tool
follow below steps
as our phone's batter is non removable its quite odd but once u understand its easy
first understand this
to use sony tool we have to connect our phone in flash mod to pc
and
and to do so remove back cover and connect your phone in any mod with pc via usb cable
and then press hardreset button
so that your phone will reboot and connect in charging mod
now remove data cable so your phone will turn off
now that your phone is turn off every thing is done
you just need to sony update tool(not PC companion ) open it and connect your phone in flash mod
link to download http://software.sonymobile.com/update_service_setup
it will say your firmware is up to date
and there wod b option for re install or something like that find it and hit on that option
its done

chauhanjayc said:
sorry for being late
and i know op has got his phone repaired
but this is for the future usage
if any one who stuck at boot logo or any where and wants to reflash firware using sony tool
follow below steps
as our phone's batter is non removable its quite odd but once u understand its easy
first understand this
to use sony tool we have to connect our phone in flash mod to pc
and
and to do so remove back cover and connect your phone in any mod with pc via usb cable
and then press hardreset button
so that your phone will reboot and connect in charging mod
now remove data cable so your phone will turn off
now that your phone is turn off every thing is done
you just need to sony update tool(not PC companion ) open it and connect your phone in flash mod
link to download http://software.sonymobile.com/update_service_setup
it will say your firmware is up to date
and there wod b option for re install or something like that find it and hit on that option
its done
Click to expand...
Click to collapse
i cant find any option.. just FINISH
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
HELP ME PLZ...

[Q] xperia z3 fastboot mode problem

I wanted to wipe user data , so I googled for that to make a hard reset from bootloader and I found some steps :
1) Turn Off handset .
2) Press Up volume and connect to the computer through USB .
My mobile led went blue , but the computer gave me "device not recognized " message .
so I pressed Power Button to exit this mode , The led went off but the mobile didn't responde.
the screen is black and the mobile not responding Since then .
When I connect it to the computer it recognize that a usb device is plugged but with the message " device not recognized"
Tried many things , like press down volume and connect , or down volume and power , down,up and power ... etc , and nothing works .
Can any one help please

Hey did you even install the fastboot driver for xperia z3?

yeah the one that called Emma .
and another one called (Flashtool) but still my windows can't recognize it .
windows 8.1 by the way .

u might need to install the driver provided by flashtools.
installing non certified drivers are bit tricky on win8 & later which u need to reboot in special mode.
or maybe pc companion include that driver.

monx® said:
u might need to install the driver provided by flashtools.
installing non certified drivers are bit tricky on win8 & later which u need to reboot in special mode.
or maybe pc companion include that driver.
Click to expand...
Click to collapse
EMMA is not non certified.
But the drivers can also be found on internet in a form of an .exe application.

I did installed the drivers in windows test mode , Still the same it can't recognize my phone .

i.dakrory said:
I did installed the drivers in windows test mode , Still the same it can't recognize my phone .
Click to expand...
Click to collapse
u need to choose Disable driver signing enforcement in Advanced options. please refer
Code:
http://revryl.com/2013/08/06/install-unsigned-drivers/
i've downgraded my PC to Win7 instead so i cant guide for step by step.

Thank you every one for trying to help
The problem solved by itself , the phone battery got empty from last night , when I charged it the phone worked normally .
Now I need to reset the phone and normal factory reset don't delete every thing (pics, sms ... etc) still exists .

Xperia Z3 , Only SOMC flash Device showing on Device manager

Kindly Help me,
I was Flashing my Z3 by Flash Tool , i accidently select D6646 ftf file instead *of D6616 ftf , during flashing Flash Tool gives error at Kernal.sin and Phone goes Down,
No Soft or Hard Reset Work,
NO Flashmood / Fastboot Mood work ,
Flash Tool only Show
'Device connected with USB debugging off
19/021/2017 07:21:01 - INFO *- For 2011 devices line, be sure you are not in MTP mode
and Device Manager Shows SOMC Flash Drive,
When Connect By press Vol Down button and Attach USB Cable, USB not Recognized Error Shows*on Windows 7
I have TA backup from Flash Tool ( ie T1 and T2 ) before flashing in case of Partition break, where as
I realize its kernel brokeup
Kindly Plese Guide me what can I do to live my phone back

are you sure fastboot mode doesnt work? just power off and press vol+ and power if led is blue then you are is fastboot mode. then try to flash kernel.sin in adb command with pc . cheers

Yes sir sureonly red led show just for 2 3 sec n then goes off flash tool shows debugging mode off .. i disconnect battery to completly shut off phone after that i connect n same probelm

https://forum.xda-developers.com/showthread.php?t=2646405

xkeita said:
https://forum.xda-developers.com/showthread.php?t=2646405
Click to expand...
Click to collapse
ihad used that trick after whole day research , I can conclude S1tools does not support 2012 upgrade model, I received error as ID HASH IS NOT SUPPORTED,
however my bootloder is unlocked, and I hav unlocked code also, and also phone is rooted ,

Yes this could work for us as we still doesn't have the preloader dump.
AFAIK there is not unbricking way for now.
Somewhere I read that pc companion could work with Q9008. Also worth to try with emma.
I want working on this to finalize the unbricking guide but will not be soon as I need my device for the rom port. When done I will work on this unbricking.
Also it is not a kernel problem. Your flash replaced s1 bootloader with a wrong one.
Good luck a be patient
What about this: https://forum.xda-developers.com/showthread.php?t=1849170 ?

nailyk said:
Yes this could work for us as we still doesn't have the preloader dump.
AFAIK there is not unbricking way for now.
Somewhere I read that pc companion could work with Q9008. Also worth to try with emma.
I want working on this to finalize the unbricking guide but will not be soon as I need my device for the rom port. When done I will work on this unbricking.
Also it is not a kernel problem. Your flash replaced s1 bootloader with a wrong one.
Good luck a be patient
What about this: https://forum.xda-developers.com/showthread.php?t=1849170 ?
Click to expand...
Click to collapse
Thankq sir, for your reply so if its s1 bootloader then is it possible to bring my phone again live will u guide me what the next thing should i do

talharais said:
Thankq sir, for your reply so if its s1 bootloader then is it possible to bring my phone again live will u guide me what the next thing should i do
Click to expand...
Click to collapse
Sorry for confusing :s
I think, today, there is no way.
You can try with the official emma flash tool or pc companion but I really doubt.

nailyk said:
Sorry for confusing :s
I think, today, there is no way.
You can try with the official emma flash tool or pc companion but I really doubt.
Click to expand...
Click to collapse
Ohhh , sir i have TA backup still cant do anything and also charging also doesnot solve problem as mention in one of the xda thread
https://forum.xda-developers.com/showthread.php?t=1849170&page=1

talharais said:
Ohhh , sir i have TA backup still cant do anything and also charging also doesnot solve problem as mention in one of the xda thread
https://forum.xda-developers.com/showthread.php?t=1849170&page=1
Click to expand...
Click to collapse
Not related with TA backup for now. You change your bootloader with a wrong one.
It is almost like if you flash the wrong bios on your mother board. You can't flash it again until someone find an 'electronic' way.
Give a try with pc companion or emma.

nailyk said:
Not related with TA backup for now. You change your bootloader with a wrong one.
It is almost like if you flash the wrong bios on your mother board. You can't flash it again until someone find an 'electronic' way.
Give a try with pc companion or emma.
Click to expand...
Click to collapse
Pc companion is not reconize the fevice actually i explain what i idid,
I was flashing d6616 by flash tool
Firstly i unlock bootloder by sony , through unlock code they email then i rooted the device by kingo root n then flash accidently i chosse d6646 rom instead of d6616 rom then during flashing flashtool gives error at kernal.sin and after that device goesoff
When i plug into the pc it reconize my device as SOMC Flash device andflash tool gives dubugging off
Thats was the whole senrio by which my device brick so after whole story i really disappointed to know that my device is just use for paper weight... :crying:
I downloaded the emma after install it desnot show any usb device

You own a d6616? It have unlockable bootloader :s
Send it to repair center. No other choice.
And yes it is confusing, it say bootloader unlock after the fastboot command but it is not true.
@blackhawk_LA made some posts about D6616. Maybe he could help you.
I just post here to announce you the bad new your device is hardly softbricked.

nailyk said:
You own a d6616? It have unlockable bootloader :s
Send it to repair center. No other choice.
And yes it is confusing, it say bootloader unlock after the fastboot command but it is not true.
@blackhawk_LA made some posts about D6616. Maybe he could help you.
I just post here to announce you the bad new your device is hardly softbricked.
Click to expand...
Click to collapse
Service status shows unlock bootloader to yes.. well very thankful for you reply means there is no way to unbrick my phone

talharais said:
Service status shows unlock bootloader to yes.. well very thankful for you reply means there is no way to unbrick my phone
Click to expand...
Click to collapse
Keep an eye on https://forum.xda-developers.com/z3/devs-only/unbricking-d6603-t3365262
I just brick my device too so will try to make some progress on it

nailyk said:
Keep an eye on https://forum.xda-developers.com/z3/devs-only/unbricking-d6603-t3365262
I just brick my device too so will try to make some progress on it
Click to expand...
Click to collapse
Tanks buddy I am watching your thread, and also let me know when done,

Hi, I decided to post it here because it seems that anything I post on Xperia Ion forum is not read, it is inactive.
I already searched everywhere and I'm loosing my hopes. I'm trying to revive an Xperia Ion and this is what I get:
When I plug the phone in the wall charger the red led turns on for some minutes and then turns off.
The same happens when I plug on PC, when the led turns off it is detected as "Somc flash device" in windows device manager and this shows in flashtool:
INFO - Device connected with USB debugging off
INFO - For 2011 devices line, be sure you are not in MTP mode
Nothing changes if I plug in pc with volume + or - pressed, it don't goes into fastboot or flashmode.
I hope you could help me. Thanks

dude i have the same problem as yours i have a z3 d6643 and i made a mistake when downloading the kernal the device loads normal flash mode and flashtools working! power button + volume down runs twrp but it no longer starts at sony black screen someone please help!

evilhedrox said:
Hi, I decided to post it here because it seems that anything I post on Xperia Ion forum is not read, it is inactive.
I already searched everywhere and I'm loosing my hopes. I'm trying to revive an Xperia Ion and this is what I get:
When I plug the phone in the wall charger the red led turns on for some minutes and then turns off.
The same happens when I plug on PC, when the led turns off it is detected as "Somc flash device" in windows device manager and this shows in flashtool:
INFO - Device connected with USB debugging off
INFO - For 2011 devices line, be sure you are not in MTP mode
Nothing changes if I plug in pc with volume + or - pressed, it don't goes into fastboot or flashmode.
I hope you could help me. Thanks
Click to expand...
Click to collapse
Same problem with an XZ, someone has a solution?
sometime Win recognize the device as QUSB_BULK

Accidental wrong flash with Flashtool

Looks like I killed my Z5. The model is 6683 (Z5 dual), and I flashed with E6533 (Z3+ dual).
The phone is completely dead, cannot turn on, not vibrating on power button etc.
When I connect to my laptop, it says "unable to recognize USB device", in detail VID_0000&PID_0000.
But if I disconnect the battery, it recognized as "SOMC Flash device", VID_0FCE&PID_DDDE
Is it possible to resurrect it?
I hope if I can flash with correct bootloader in this state, it will enought to boot up and able to flash with the right firmware.

Macs1209 said:
Looks like I killed my Z5. The model is 6683 (Z5 dual), and I flashed with E6533 (Z3+ dual).
The phone is completely dead, cannot turn on, not vibrating on power button etc.
When I connect to my laptop, it says "unable to recognize USB device", in detail VID_0000&PID_0000.
But if I disconnect the battery, it recognized as "SOMC Flash device", VID_0FCE&PID_DDDE
Is it possible to resurrect it?
I hope if I can flash with correct bootloader in this state, it will enought to boot up and able to flash with the right firmware.
Click to expand...
Click to collapse
Are you able to connect it in flashmode and fastboot ?

With battery, no.
Without battery, my laptop recognize as "SOMC Flash device", but no tool can connect to it (like FlashTool).
(I think then different PID is the reason)

Macs1209 said:
With battery, no.
Without battery, my laptop recognize as "SOMC Flash device", but no tool can connect to it (like FlashTool).
(I think then different PID is the reason)
Click to expand...
Click to collapse
it seems to me that you are an advanced person in playing with your mobile, this kind of issues is beyond of my knowledge but I was replying to your thread hopefully someone here can help, I'm fearing that you have messed up with your mobile

Well, you could try to flash it from Ubuntu (NOT inside Windows 10 !) via FlashTool,
under windows there are limitations with different device IDs that separate drivers would be needed (and if only "wrong" ID is detected under Linux it doesn't really matter, since it's detected anyway),
perhaps under Linux operating systems you have more luck

Thank you for idea, but not working.
Finally I found an old SETool3 box , and successfully flashed with it without battery
Somehow it can fixed it.

Macs1209 said:
Thank you for idea, but not working.
Finally I found an old SETool3 box , and successfully flashed with it without battery
Somehow it can fixed it.
Click to expand...
Click to collapse
I am facing a similar situation, can you help me by telling me what exactly did you do to solve the issue step by step?

Same Problem With Me PLZ HELP
Dear Bro Ive same problem with my Xperia e6683 Total Dead After Wrong Flash with Xperia Z3+ File... SO Plz help me how to fit step by step guide plz....
As on 20 Jan 2017
I've Flash Successfully It With Setool fusion Box Without Battery Use Test Pin Method. Now My My Phone Again Alive..

[email protected] said:
Dear Bro Ive same problem with my Xperia e6683 Total Dead After Wrong Flash with Xperia Z3+ File... SO Plz help me how to fit step by step guide plz....
As on 20 Jan 2017
I've Flash Successfully It With Setool fusion Box Without Battery Use Test Pin Method. Now My My Phone Again Alive..
Click to expand...
Click to collapse
Dear Bro Ive same problem with my Xperia x Total Dead After Wrong Flash
The phone is completely dead, cannot turn on, not vibrating on power button etc.
When I connect to my laptop, it says "unable to recognize USB device"
using test pin method it is recognized as "SOMC Flash device"
i have backup ta partition and ftf firmware of my xperia i can't find any tool to flash
can you guide me please

Flashtool Doesn't Recognise This Device. U can use Setool/ Setool Fusion Box to Repai
bma1973 said:
Dear Bro Ive same problem with my Xperia x Total Dead After Wrong Flash
The phone is completely dead, cannot turn on, not vibrating on power button etc.
When I connect to my laptop, it says "unable to recognize USB device"
using test pin method it is recognized as "SOMC Flash device"
i have backup ta partition and ftf firmware of my xperia i can't find any tool to flash
can you guide me please
Click to expand...
Click to collapse
Bro
In this Condition Flashtool Not Recognised Ur Device. There is only a best solution U Can Use SETOOL/SETOOL FUSION BOX To Repair/ Flash Ur Device.

[email protected] said:
Dear Bro Ive same problem with my Xperia e6683 Total Dead After Wrong Flash with Xperia Z3+ File... SO Plz help me how to fit step by step guide plz....
As on 20 Jan 2017
I've Flash Successfully It With Setool fusion Box Without Battery Use Test Pin Method. Now My My Phone Again Alive..
Click to expand...
Click to collapse
bma1973 said:
Dear Bro Ive same problem with my Xperia x Total Dead After Wrong Flash
The phone is completely dead, cannot turn on, not vibrating on power button etc.
When I connect to my laptop, it says "unable to recognize USB device"
using test pin method it is recognized as "SOMC Flash device"
i have backup ta partition and ftf firmware of my xperia i can't find any tool to flash
can you guide me please
Click to expand...
Click to collapse
wrong flash means wrong kernel!
you might be stuck on black screen when you frist switchon device! the device is running! but since its stuck on bootloops no interface is open!
press power and volume up button for 15+ seconds and let it JERK 3 times , this if force shutdown. the device should get connected now in flashmode