Database Info

Trying to flash LiquidSmooth, and a few problems

Hi everyone, really sorry if someone has asked this before, but I looked through the forums and couldn't find much pertaining to my problem.
I installed LiquidSmooth 4.2.1 for my I535 Galaxy S3 on Verizon, and it loaded, but I noticed my appstore was gone, preventing me from installing Titanium to get all my apps back.
I googled it and that told me to install Gaaps. So I reflashed the stock ROM, and then installed Gaaps. When I did, every Google related app crashed simultaneously, making the phone near unusable. I figured I'd just reflash the stock image again, and that seemed to fix the problem. Is there anything else I should do, in case something goes wrong?
I have a feeling I might have used the wrong Gaaps? Is there a certain place I'm supposed to look as mentioned here? In that same thread, it looks like the dev doesn't even want to answer where to get the gaaps.
Again, I'm sorry if the answer is obvious, but I am having a little trouble here.

why are you trying to install an inferior dated version?
go here
http://forum.xda-developers.com/showthread.php?t=2148261
and do the latest build.
the google apps are right under the download button in the OP.

ddurandSGS3 said:
why are you trying to install an inferior dated version?
go here
http://forum.xda-developers.com/showthread.php?t=2148261
and do the latest build.
the google apps are right under the download button in the OP.
Click to expand...
Click to collapse
I saw that one, and noticed i535 wasn't one of the options listed. Do I just use d2vzw?

levelxplane said:
I saw that one, and noticed i535 wasn't one of the options listed. Do I just use d2vzw?
Click to expand...
Click to collapse
yes.

Always make sure to flash a Gapps package when flashing a ROM, unless otherwise specified. Also, when flashing a Gapps package make sure that you flash a gapps package that is compatible with whichever variant phone you are using, in your case d2vzw as well as compatible with the ROM, i.e. if flashing a 4.2.2 ROM make sure you flash the compatible gapps package. Doing an extra 10 minutes of research can save you hours of headaches.

levelxplane said:
Hi everyone, really sorry if someone has asked this before, but I looked through the forums and couldn't find much pertaining to my problem.
I installed LiquidSmooth 4.2.1 for my I535 Galaxy S3 on Verizon, and it loaded, but I noticed my appstore was gone, preventing me from installing Titanium to get all my apps back.
I googled it and that told me to install Gaaps. So I reflashed the stock ROM, and then installed Gaaps. When I did, every Google related app crashed simultaneously, making the phone near unusable. I figured I'd just reflash the stock image again, and that seemed to fix the problem. Is there anything else I should do, in case something goes wrong?
I have a feeling I might have used the wrong Gaaps? Is there a certain place I'm supposed to look as mentioned here? In that same thread, it looks like the dev doesn't even want to answer where to get the gaaps.
Again, I'm sorry if the answer is obvious, but I am having a little trouble here.
Click to expand...
Click to collapse
If you flash another AOSP ROM the newest Gapps is from 3/1/2013
---------- Post added at 06:41 AM ---------- Previous post was at 06:36 AM ----------
mcdevil58 said:
If you flash another AOSP ROM the newest Gapps is from 3/1/2013
Click to expand...
Click to collapse
http://goo.im/gapps/gapps-jb-20130301-signed.zip

Setup Wizard Unfortunately Failed
I just installed the LiquidSmooth Rom and Gapps zips. I reboot phone and i get the "Unfortunately Setup Wizard has stopped" any help?
I am kinda new at this so some guidance will be appreciated.

liquid 4.2.2
why not try liquid 4.2.2

why not
brandoncarlson33 said:
why not try liquid 4.2.2
Click to expand...
Click to collapse
I second that recommendation. So smooth. Almost nothing wrong with it. (There has to be something, just not found it yet).

awesome
kevcuas said:
I second that recommendation. So smooth. Almost nothing wrong with it. (There has to be something, just not found it yet).
Click to expand...
Click to collapse
liquid smooth 2.1 stable is the bomb no issues except the sound icon but who cares other than that its prefect

[Q] about CM11.0 [20140316]

Hello,
I've been reading this forum for quite some years and using some of the tutorials and ROMs from here but never actually posted anything and now that I have a few questions about on of the ROMs I'm using now I'm not quite sure where to post it since as a newly registered member I can't post anything in the correct ROM Thread [ http://forum.xda-developers.com/showthread.php?t=2467013 ], so please be patient with me.
I thought it would make more sense to post my actually questions than trying to reach those 10 posts to be able to post it directly there.
So now to my questions:
I have a HTC Desire S (obviously) and had for about 1 1/2 years now an old CoreDroid Version from here (can't remember which one) which I was quite happy with till it started to crash more and more often, battery kept draining and then there came a point a few weeks ago where it would just randomly go out and wouldn't restart till you charged it again.
That got me so annoyed I thought I either buy a new HTC Desire 310 soon or give another ROM a try, so I chose the cm-11-20140324-UNOFFICIAL-saga.zip from the first page and installed it after remembering how to do so.
Then the Gapps and started configuring it.
So far so good, ROM looks good, stable, battery is working much longer now, so thanks a lot.
But I had and still have some issues.
Whatsapp wouldn't instal, so through the search function I would a way around it (in the end downloading it from whatsapp directly and installing it through the .apk worked) and got that sorted.
The next thing is still a worry to me, I used to sync my contacts from my outlook through android-sync [ http://www.android-sync.com/ ] which I bought after non of the other syncing methods worked to my satisfaction. Everything worked fine with the old ROM (after I set it up) but with the new ROM the program on my computer can't find the mobile phone anymore, I tried to reinstall the ADB drivers, but it didn't work (I sent the error log from the program to the developer a few days ago but still haven't heard back), so maybe someone around here knows a way around it?
Last night I experienced another issue, the clock works fine and after I installed the ROM I set up a few different alarm clocks and they worked. But yesterday I wanted to change the alarms and now every time I try to access the alarm clock the clock app stops working "Clock stopped working" and it closes.
I can delete the alarms and set up a new one, but only the time, then it saves and when I try to change the days or the sound same error appears. I searched the forum and internet for a bit and found ideas like deleting the clock data and cache, rebooting the device, but none worked.
And last but not least it seems I can't find the right settings for it but every time I swype or type on the keyboard it vibrates. I turned off all the other noises that the phone made while typing but this one I can't find. I would like my phone to be silent and don't vibrate when I type. Where can I find the settings for it?
If anybody could help me with this I would appreciate it a lot.
Kind Regards
Marvin

For vibrating on keyboard press setting are at SETTINGS/Presonal/Languager and Input/Keyboard settings (for me it's ASOP keyboard settings).
Did you do dirty flash or clean one? Clean ROM flash is recommended.
Other problems I got with previous devil-kin CM11.Couldn't get usb mass storage and adb working.Now I keep Flinny CM11 build and it works.I didn't try devil-kin last build.
Maybe you can try install Flinny alpha 5 CM11 and try if that work.

SKENER said:
For vibrating on keyboard press setting are at SETTINGS/Presonal/Languager and Input/Keyboard settings (for me it's ASOP keyboard settings).
Did you do dirty flash or clean one? Clean ROM flash is recommended.
Other problems I got with previous devil-kin CM11.Couldn't get usb mass storage and adb working.Now I keep Flinny CM11 build and it works.I didn't try devil-kin last build.
Maybe you can try install Flinny alpha 5 CM11 and try if that work.
Click to expand...
Click to collapse
I installed Flinny alpha 5 CM11 now and tried it out. I had a few crashes with the devil-kin version too and bought a new battery, so hard to tell what solved what, but so far so good.
But for the syncing problem, now I have an even worse error:
ht*p :// i.gyazo.com/798a67697deb9f91904e7cac9b62bf76.png
with the devil-kin version it still found something and just had problems with the adb drivers, now there seems to be something else going on.

m4rvin88 said:
Hello,
That got me so annoyed I thought I either buy a new HTC Desire 310 soon or give another ROM a try, so I chose the cm-11-20140324-UNOFFICIAL-saga.zip from the first page and installed it after remembering how to do so.
Then the Gapps and started configuring it.
So far so good, ROM looks good, stable, battery is working much longer now, so thanks a lot.
But I had and still have some issues.
Whatsapp wouldn't instal, so through the search function I would a way around it (in the end downloading it from whatsapp directly and installing it through the .apk worked) and got that sorted.
Click to expand...
Click to collapse
Regarding that issue I also got problems with many other apps i.e. Redphone, Textsecure, Chiffry and so on there always comes the message that these apps are incompatible to my device - strange I also use cm11_saga_flinny_alpha5 Kernel 4.4.2.
These messages of incompatibility are generated by Google play store, when comparing AndroidManifest.XML permissions and requirements with the phone...

Further more Issues at Finny/Devilkin CM11.0
Hello guys,
I am also new at this Forum although using it "passiv" since years. Now I flashed the CM 11.0 from Devilkin and ones from Flinny.
- Unofficial CM10.2 / CM11.0 build for Saga / Desire S
All works (both ROMs) great up to the wired headphone Controles.
I think this might be the right thread to Post that until I reached the Number of Posts to put the in the right developerthread. Hope anyone can help.
The exactly problem:
I use orginal HTC-Headset with three controller Buttoms. The headphone itself is working though I can hear music and sound but the Controls and the Mic are not working. I tried to register an input with the jayzheadphone app but it shows no input. Headphone and controls worked fine with stock ROM.
Thank you for help.

@Terodax
Sorry but I cant't evaluate your issue cause of the missing HTC-Headset, but I got some other weird thing with the "mute" button on calling someboy it fails in doing it .-/
So I worked around the little problem in "holding" the call -> that works and it's like muting

htc wihc room to use
Hello
I bought this item.
http://www.ebay.com/itm/121361166744...84.m1423.l2649
Wich rom to android 4 or last?
How can I install those rom?
I need to using zip flashable file on recovery mod or addoin way?
will I need to flash the modem (phone) after?
has the recovery a nandroid backup option? I wanna backup the current rom like it is.
which is the best recovery for that item?
Thanks
---------- Post added at 10:45 PM ---------- Previous post was at 10:44 PM ----------
Hello
I need to use whatsapp and facebook mensseger on it.
thanks

[Q&A] [ROM][4.4.4][Unofficial] CyanogenMod CM-11.0

Q&A for [ROM][4.4.4][Unofficial] CyanogenMod CM-11.0
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][4.4.4][Unofficial] CyanogenMod CM-11.0. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

Burst mode bug in camera!
hello,
I've been using cm 11 for a while now and one thing i have noticed to be really buggy is the camera,
when you set in the burst mode let's say 5 shots; instead of capturing 5 images instantaneously it focuses for every shot! and the whole meaning of burst mode is lost in the process. please do look into this issue in the next build.

jreddy said:
hello,
I've been using cm 11 for a while now and one thing i have noticed to be really buggy is the camera,
when you set in the burst mode let's say 5 shots; instead of capturing 5 images instantaneously it focuses for every shot! and the whole meaning of burst mode is lost in the process. please do look into this issue in the next build.
Click to expand...
Click to collapse
It's not a bug, it's in your set up. When you go into the camera settings, go to "Focus Mode". It should give you an option called something like "fixed" or "continuous", etc. That'll keep it from refocusing between shots.

did not work.
1BadWolf said:
It's not a bug, it's in your set up. When you go into the camera settings, go to "Focus Mode". It should give you an option called something like "fixed" or "continuous", etc. That'll keep it from refocusing between shots.
Click to expand...
Click to collapse
It was set to auto by default, i changed it and tried it with every option available in that list nothing worked, and it does not seem to be a HW prob cause it was working perfectly on 4.1.2.

new build faild to install
yesterday i download new buid and i also download new gapps then i try to install new rom and gapps but its fail to load and red light turn on and the rom and gapps just install in three or five second usually its takes some minutes but this time its happed like this so if anybody know about this problem please help.
first i format system,data,and cash and all that option then install new rom and after that gapps but its not boot after that so current i switch back to older build.
thanks

Sharp Battery Drain
hi,
I've installed the latest build of CM11 by @thehurricaneguy coming from the older build of CM11 from the previous thread by @alteredlikeness.
Now after installing this build it the main problem for me was the battery sharply drains to 20% from 50-40%, i thought it was a battery problem and bought a new one it's the same for the new battery too, i thought i was the only one as it seems that was not the case.
Main problem starts here. i'm running CM11 on system 3 and it some how affected jb leak 3 too :C, i now have two batteries that drain to 20% from 50-40% on BOTH ROM's , after this issue I've deleted the system 3 and now run on 4.1.2 but the drainage remained the same.
i wiped the battery stats, cache, Dalvik Cache many times hoping that might fix it but to no avail.
>>>"I accidentally Erased my CID a long time Ago"<<<
i'm scared of doing a factory Reset and losing BMM ending up with a Bricked Phone, could any one help me resolve this battery drainage issue and how to restore CID with out a back up copy.
thank you

Stock Calendar and Google Calendar Not Working
From last three or four updates i notice that calender not working its can not sign in to a an account nor its start sync with already added one Google account right now i m using latest build of cyanogenmod 11 by @thehurricaneguy.

jadeja.rajdeep said:
From last three or four updates i notice that calender not working its can not sign in to a an account nor its start sync with already added one Google account right now i m using latest build of cyanogenmod 11 by @thehurricaneguy.
Click to expand...
Click to collapse
I'm using Google Calender 5.0 right now and it works flawlessly.
Try clearing data and/or reinstalling the app.

thanks for new build
thank you very much for your time and effort for new build @thehurricaneguy

Atrix 2 CM11 20141115 ROM
Other than completely no sound at all, has anyone face YoutTube always buffers the video but fail to play, Videos cant be played using gallery and camera in whatsapp is very buggy/fisheye ? How should i fix this? Dirty flash to previous CM11 version?
---------- Post added at 05:14 AM ---------- Previous post was at 05:05 AM ----------
jreddy said:
hi,
I've installed the latest build of CM11 by @thehurricaneguy coming from the older build of CM11 from the previous thread by @alteredlikeness.
Now after installing this build it the main problem for me was the battery sharply drains to 20% from 50-40%, i thought it was a battery problem and bought a new one it's the same for the new battery too, i thought i was the only one as it seems that was not the case.
Main problem starts here. i'm running CM11 on system 3 and it some how affected jb leak 3 too :C, i now have two batteries that drain to 20% from 50-40% on BOTH ROM's , after this issue I've deleted the system 3 and now run on 4.1.2 but the drainage remained the same.
i wiped the battery stats, cache, Dalvik Cache many times hoping that might fix it but to no avail.
>>>"I accidentally Erased my CID a long time Ago"<<<
i'm scared of doing a factory Reset and losing BMM ending up with a Bricked Phone, could any one help me resolve this battery drainage issue and how to restore CID with out a back up copy.
thank you
Click to expand...
Click to collapse
Have you check the clockworkmod file in your SD card? I too deleted my CID but luckily i found my CID in the clockworkmod file

UPDATE : Camera app is totally bugged. Its inverted and focus is jelly-ish like. Running on CM11 ver.20141115
Sent from my MB865 using XDA Free mobile app

hi this work whit motorola atrix ME865 ?????????????????

Hitokirilv4 said:
hi this work whit motorola atrix ME865 ?????????????????
Click to expand...
Click to collapse
Hey there yes this will work with any region Atrix2, just make sure you install and use Boot Menu Manager to flash it. Follow all instructions given on how to flash it in the CM11 thread and there are guides here on how to setup BMM for ready use. Good luck!

Updates
Are we going to have any more updates of this ROM or should I flash the 11/15 ROM???

edit: nvm,got it

Unable to find 3rd Nov Build
Hi All,
I am unable to find 3rd Nov build for CM 11 @thehurricaneguy
Google drive folder is empty and Box contains only cm-11-20140830-UNOFFICIAL-edison.zip
Is there any other link than the Original Post to find all versions?
Thanks

[Q&A] [ROM] **crDroid Lollipop 5.0.0** [20141130]

Q&A for [ROM] **crDroid Lollipop 5.0.0** [20141130]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM] **crDroid Lollipop 5.0.0** [20141130]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

thanks,great job,but no % battery in the notif barre ?

Just downloaded crDroid Lollipop 5.01.
Great Job

Built in root
It says the ROM comes pre rooted but after several flashes of the ROM it still wouldn't work.
How do I fix this?
Thanks in advance

Yep.. I have been using this as a daily driver now for more than a week. Super Stable.
Love this ROM ..........
---------- Post added at 01:10 AM ---------- Previous post was at 01:02 AM ----------
Karel VH said:
It says the ROM comes pre rooted but after several flashes of the ROM it still wouldn't work.
How do I fix this?
Thanks in advance
Click to expand...
Click to collapse
Try flashing the latest SuperSu in this thread.....

You rock man.

Just downloaded this release. Wow Quick......

Great Job...Already Installed without any issues..... Thanks

Why don't restore app using titanium?
Thanks

just installed crDroid - Bacon 5.0.1
Hey guys, just installed crDroid on my OPO, love it so far! Was using LiquidSmooth before but didn't like how everything was dark!

Thanks for the ROM! However the bluetooth connection seems buggy. It keeps disconnecting and reconnecting my bluetooth headset (2 of them) consistently.

email
Great ROM!!
Flashed this rom yesterday and had no problems
I just can't get any of my email-accounts to sync (except gmail of course). Anyone else with this issue?

i recently instaled cRdroid in my chinesse OPO and i have 2 problems.
First when my phone is locked with the screen off sometimes i touch the power button and the screen doesnt turn on, double tap doesnt work either, the solution is hold the power button till the phone goes off or to plug the usb cable to my pc.
2nd problem is that sometimes ramdomly when i leave a wifi network the data traffic doenst come back and i see a exclamation mark (!) in the signal level.
btw sorry for my english.

Every time downloading a 250mb+ ROM and flashing it would be a prob due to poor internet facilities in India...
It would very helpful if OTA is added so that only changes can be flashed via recovery

It seems that no option for ejecting External SD Card or OTG USB Storage in Settings. How can I fix it?
Thanks in advance.

Hello all!
I wanted to download crDroid, and AK Kernel. I'm rooted, unlocked, custom TWRP recovery, everything you can ask for... I've already flashed a new ROM (I have Blisspop right now) and I wanted to try out crDroid w/ AK Kernel. I could do it by myself, but I don't want to mess up/go into bootloop. To be honest, I'm still a noob and have no idea what a Kernel is... so is anyone willing to help me step by step to install all of these on my OPO? Obviously I know how to install new ROMS (backup (if you want), clean wipe, cache, flash rom, gapps, all that good stuff)), but I'm worried on how to do it with a new kernel (I'm also trying to save battery and I heard this is a good combo. my battery life is TERRIBLE.)
Thanks a ton!
- Joe

...
---------- Post added at 04:27 PM ---------- Previous post was at 04:21 PM ----------
"Unfortunely, phone has stopped" ?!?

error executing updater
Trying to install the crdroid-5.0.2-20150208-bacon file with TWRP 2.8.4.1 get 'e:error executing updater binary in zip.' did a complete system wipe to nothing, same error.

SensualPuma said:
Hello all!
I wanted to download crDroid, and AK Kernel. I'm rooted, unlocked, custom TWRP recovery, everything you can ask for... I've already flashed a new ROM (I have Blisspop right now) and I wanted to try out crDroid w/ AK Kernel. I could do it by myself, but I don't want to mess up/go into bootloop. To be honest, I'm still a noob and have no idea what a Kernel is... so is anyone willing to help me step by step to install all of these on my OPO? Obviously I know how to install new ROMS (backup (if you want), clean wipe, cache, flash rom, gapps, all that good stuff)), but I'm worried on how to do it with a new kernel (I'm also trying to save battery and I heard this is a good combo. my battery life is TERRIBLE.)
Thanks a ton!
- Joe
Click to expand...
Click to collapse
You just need to let the room boot fully once, then you can reboot into recovery and flash both the latest AK kernel available and the UKM script if you want to use synapse (kernel control app)
In terms of what to tweak, poking around the AK thread would probably be worthwhile, I'm sure a ton of people have posted their setups.
If you dirty flash Rom updates, the stock kernel will overwrite the custom one. I usually try the stock kernel for a bit (at least a few battery cycles) to see what it's like before flash G something though.

embmiphone said:
Trying to install the crdroid-5.0.2-20150208-bacon file with TWRP 2.8.4.1 get 'e:error executing updater binary in zip.' did a complete system wipe to nothing, same error.
Click to expand...
Click to collapse
I am also having the same issue please someone help

Lineage 17.1 is available now

So this morning I went to check on lineage OS news oh, and I found out that they released today for all pixels. I am running it with no issues although I would recommend to download the micro gapps package cuz if you do the Nano or anything below it will give you issues with your phone reading SIM card. Aside from that I had successfully running the rom with magisk installed.

Which versions of gapps did you try? Only nano/micro? I was thinking of selecting pico. Also, can you update via their in house ROM updater app while rooted?
Sent from my Pixel 4 XL using XDA Labs

bradical711 said:
Which versions of gapps did you try? Only nano/micro? I was thinking of selecting pico. Also, can you update via their in house ROM updater app while rooted?
Sent from my Pixel 4 XL using XDA Labs
Click to expand...
Click to collapse
Will there still wait to check to see if the updater works but it looks like everything is fully functional within it and right now, take a look at the picture that I'm going to attach to this that is her updater and it looks like it is completely 100% functional but I cannot be sure because there is no updates to test it with.
As far as the gapps go, don't use anything smaller than micro. There is something pixel 4 needs in telephony to work that is in micro+ but not in nano or pico ... If you flash rom without gapps , your phone will work to make calls, if you flash any gapps before micro, you will get a " insert SIM, emergency calls only " message.
After you flash rom, MAKE SURE TO REBOOT AND THEN FLASH GAPPS,! otherwise if you try to do it in the same session that you flashed ramen you will get a message telling you that you have insufficient storage to flash and it will fail to flash gapps!
A few things that I wish and I hope they do fix would be the 90 hertz implementation switch as of now there is no switch for it and the screen flickers at low brightness.
Soli gestures would be great, I know DU has them working so it's a matter of time before lineage does as well.... Same goes with the squeeze for assistant,.... It is also not working ..
Not working :
Soli gestures
Squeeze
Smooth display
this is the first release so I did expect it to not be fully fully functional but I know that within time it will be one of the best roms out there

i42o said:
this is the first release so I did expect it to not be fully fully functional but I know that within time it will be one of the best roms out there
Click to expand...
Click to collapse
Thank you for the detailed response!! I greatly appreciate all the info and I'm sure others will as well!:highfive: I will probably try it when the ROM becomes more stable. Currently on DU myself and I don't mind waiting until the project improves further. Would you mind letting us know in the thread how your first update goes while rooted? Thank you again for trying the legendary ROM and letting us know it was released!
Sent from my Pixel 4 XL using XDA Labs

bradical711 said:
Thank you for the detailed response!! I greatly appreciate all the info and I'm sure others will as well!:highfive: I will probably try it when the ROM becomes more stable. Currently on DU myself and I don't mind waiting until the project improves further. Would you mind letting us know in the thread how your first update goes while rooted? Thank you again for trying the legendary ROM and letting us know it was released!
Sent from my Pixel 4 XL using XDA Labs
Click to expand...
Click to collapse
Yeah, so after I installed it and set it up, I then adb sideloaded magisk canary on its stock kernel, it went thru like knife thru butter.
I then rebooted into android, finalized the magisk set up, rebooted and voila... I was rooted.... I then tried Kiri Kernel, since it has the necessary things for TWRP, flashed it within ex kernel and then tried to boot TWRP in bootloader only to get stuck on TWRP splash screen...
I was honestly trying to have lineage working with a working TWRP but unfortunately it did not work as such. So I gave up on the TWRP and I've been running the ROM with magic and modules installed with no hiccups The boot time is amazing battery life is really really good...
Viper worked first try... This has has to be one of three good roms out there with little to no issues.
DU
PIXEL DUST ( CAF )
LINEAGE

i42o said:
Yeah, so after I installed it and set it up, I then adb sideloaded magisk canary on its stock kernel, it went thru like knife thru butter.
I then rebooted into android, finalized the magisk set up, rebooted and voila... I was rooted.... I then tried Kiri Kernel, since it has the necessary things for TWRP, flashed it within ex kernel and then tried to boot TWRP in bootloader only to get stuck on TWRP splash screen...
I was honestly trying to have lineage working with a working TWRP but unfortunately it did not work as such. So I gave up on the TWRP and I've been running the ROM with magic and modules installed with no hiccups The boot time is amazing battery life is really really good...
Viper worked first try... This has has to be one of three good roms out there with little to no issues.
DU
PIXEL DUST ( CAF )
LINEAGE
Click to expand...
Click to collapse
Is 90hz working??

ahoslc said:
Is 90hz working??
Click to expand...
Click to collapse
Read just one or two more posts above the one you quoted to find your answer.

bradical711 said:
Read just one or two more posts above the one you quoted to find your answer.
Click to expand...
Click to collapse
Smooth display is auto switching between 60hz and 90hz that's why I asked if just 90hz was working

i42o said:
Will there still wait to check to see if the updater works but it looks like everything is fully functional within it and right now, take a look at the picture that I'm going to attach to this that is her updater and it looks like it is completely 100% functional but I cannot be sure because there is no updates to test it with.
As far as the gapps go, don't use anything smaller than micro. There is something pixel 4 needs in telephony to work that is in micro+ but not in nano or pico ... If you flash rom without gapps , your phone will work to make calls, if you flash any gapps before micro, you will get a " insert SIM, emergency calls only " message.
After you flash rom, MAKE SURE TO REBOOT AND THEN FLASH GAPPS,! otherwise if you try to do it in the same session that you flashed ramen you will get a message telling you that you have insufficient storage to flash and it will fail to flash gapps!
A few things that I wish and I hope they do fix would be the 90 hertz implementation switch as of now there is no switch for it and the screen flickers at low brightness.
Soli gestures would be great, I know DU has them working so it's a matter of time before lineage does as well.... Same goes with the squeeze for assistant,.... It is also not working ..
Not working :
Soli gestures
Squeeze
Smooth display
this is the first release so I did expect it to not be fully fully functional but I know that within time it will be one of the best roms out there
Click to expand...
Click to collapse
90hz works, 70% plus brightness on coral gives 90hz, below is 60hz. flame has some different tunings percentage wise, but same concept.
RefreshRate will work as soon as we have an official R image I can steal a single APK from.
We won't be implementing Squeeze or Soli most likely - it's RE, and given scrutiy over large projects and reverse engineered code, we likely won't see it unless it's reimplemented OSS (DU reverse-engineered it, but didn't clean room re-implement).
ahoslc said:
Smooth display is auto switching between 60hz and 90hz that's why I asked if just 90hz was working
Click to expand...
Click to collapse
It works.

ok well i went back to stock aug firmware and then flashed the img file, then sideloaded the rom, rebooted right into recovery and flashed gapps ... stuck on the lineage boot animation .. do i need to let it boot up then reboot into recovery and flash gapps?
tried again, flashed the image then rebooted to start menu, rebooted to recovery and flash mini gapps and rebooted ... still stuck on the boot logo
what am i missing?
somehow i got it to boot and had a trebucket error, installed a different launcher - FIXED.
can not finish setup, keep getting data transfer crash
anyone get TWRP to load? im using fsociety kernel and it worked on another ROM

Madjax2020 said:
ok well i went back to stock aug firmware and then flashed the img file, then sideloaded the rom, rebooted right into recovery and flashed gapps ... stuck on the lineage boot animation .. do i need to let it boot up then reboot into recovery and flash gapps?
tried again, flashed the image then rebooted to start menu, rebooted to recovery and flash mini gapps and rebooted ... still stuck on the boot logo
what am i missing?
somehow i got it to boot and had a trebucket error, installed a different launcher - FIXED.
can not finish setup, keep getting data transfer crash
anyone get TWRP to load? im using fsociety kernel and it worked on another ROM
Click to expand...
Click to collapse
You're going to have to skip that by disabling the app when it force closes . It should let you proceed from there on. TWRP won't work and idk why... Trebuchet launcher will FC as well but since Google home launcher is installed via gapps it should be a fail safe. As far as kernel, I am running kirisakura and it has the necessary things to work with TWRP but I won't. Trust me I tried.... Make sure to root with magisk canary .
To fix cts mismatch in magisk download termux
SU
props
And select option 2 forced basic key attestation
Select y for yes and proceed... Reboot and you should pass safety net checks...
Hit thanks if I helped .. one love

i42o said:
You're going to have to skip that by disabling the app when it force closes . It should let you proceed from there on. TWRP won't work and idk why... Trebuchet launcher will FC as well but since Google home launcher is installed via gapps it should be a fail safe. As far as kernel, I am running kirisakura and it has the necessary things to work with TWRP but I won't. Trust me I tried.... Make sure to root with magisk canary .
To fix cts mismatch in magisk download termux
SU
props
And select option 2 forced basic key attestation
Select y for yes and proceed... Reboot and you should pass safety net checks...
Hit thanks if I helped .. one love
Click to expand...
Click to collapse
thank you sir for the reply. However i could not get it to be stable. The initial setup failed no matter what i tried. The error of data tansfer tool would fail. I want to run this as it seemed very smooth, however i think i need to wait for another update or something. i followed the OP to the t and nothing seemed to work properly for me.

I use this daily, and am entirely unsure what you're doing here.
Are you using the wiki guide? If not, follow that to the tee, use nano opengapps preferably, and everything works like a charm.

npjohnson said:
I use this daily, and am entirely unsure what you're doing here.
Are you using the wiki guide? If not, follow that to the tee, use nano opengapps preferably, and everything works like a charm.
Click to expand...
Click to collapse
I'll try again thanks for the info
Seems the wiki says you can sideload gapps right after sideloading the OS, the OP said doing that causes issues lol. But he'll I'll try it anyway

npjohnson said:
I use this daily, and am entirely unsure what you're doing here.
Are you using the wiki guide? If not, follow that to the tee, use nano opengapps preferably, and everything works like a charm.
Click to expand...
Click to collapse
Got this running great, with gapps. Was wondering if you're getting the issue I am with google assistant. It seems to freeze up and not be usable.

followed the wiki directions and used full gapps not nano ( missed that 1 bit of info ) im STILL getting data tansfer tool keps stopping when trying to finish the setup going to try a reboot and see what happens. it shows just a sec then saying looing for updates then installing updates and crashes ... then back t connect to wifi . does this have to do with the gapps?
SO ODD ... reflashed and used nano. asked to connecto to mobile data, nothing as showing up, hit skip, tried wifi and nada .... hit skip then same damn error for setup .... insane. maybe ill just cancel the setup and do everything manually
retied all steps and got the no space error when doing gapps, switched to slot b and tried again and it worked ... waiting to see the data tansfer error ... i dont think my phone wants to play nice lately, or ever.
went back to stock firmware, loaded the 9/6 lineageos and have NO mobile data with nano gapps loaded. doing the update currently and will update shortly what happens
i can officially state i am up and running with so far NO issues, i have mobile data, wifi sent texts and made a call. now going to root and swiftbackup restore all my apps and blah blah

Anyone tried the new 13th nightly? Hopefully they fixed the screen flicker.

Madjax2020 said:
followed the wiki directions and used full gapps not nano ( missed that 1 bit of info ) im STILL getting data tansfer tool keps stopping when trying to finish the setup going to try a reboot and see what happens. it shows just a sec then saying looing for updates then installing updates and crashes ... then back t connect to wifi . does this have to do with the gapps?
SO ODD ... reflashed and used nano. asked to connecto to mobile data, nothing as showing up, hit skip, tried wifi and nada .... hit skip then same damn error for setup .... insane. maybe ill just cancel the setup and do everything manually
retied all steps and got the no space error when doing gapps, switched to slot b and tried again and it worked ... waiting to see the data tansfer error ... i dont think my phone wants to play nice lately, or ever.
went back to stock firmware, loaded the 9/6 lineageos and have NO mobile data with nano gapps loaded. doing the update currently and will update shortly what happens
i can officially state i am up and running with so far NO issues, i have mobile data, wifi sent texts and made a call. now going to root and swiftbackup restore all my apps and blah blah
Click to expand...
Click to collapse
You do remember I said micro right? I specifically explained that by using nano you would have no cell phone connectivity and upon transfer tool just put no transfer

XMayhem2099 said:
Anyone tried the new 13th nightly? Hopefully they fixed the screen flicker.
Click to expand...
Click to collapse
Yes it is still there but much less now

Face unlock working?