sorry for my bad english
here is my problem i want to downgade
b923 to b919 and upgrade back to b923 u8860 4.0.3
so that i can install custom rom
suggestion will be appreciated...
im noob in android..
and some rooting...
for b923 u8860 4.0.3
can you post some link that
i can find a tutorial that can suit my needs...
thanks for the reply...:
i have no idea..im new in android...
ROMs
Stock ROMs (& leaked stock ROMs)
Stock ROMs (or leaked stock ROMs) can be flashed like this:
Download and unpack onto your micro-SD Card like that: /mnt/sdcard/dload/UPDATE.APP (some ROMs also have UPDATE_CUST.APP, copy it to the same place. If you're update has a second dload_cust (or the like) folder, you need to flash it in a second round just as the first one, by renaming it to "dload")
Turn off Fast-Boot, and shutdown your phone. If you don't know how to turn off Fast-Boot, pull the battery (it can be found in different places in different ROMs)
Press and hold volume-up, volume-down and power-button at the same time.
If everything above was done correctly, you should be able to watch your phone upgrading now.
can someone teach me how to do it
by pink screen or usb debugging only...?
i find it here
http://forum.xda-developers.com/showthread.php?t=1552038
Hi,
There's the thread you already linked, which you can post in... But until you reach 10 constructive posts, it will create a thread automatically in the Q&A section. There is this thread on the topic too, and the last few pages discuss the pink screen.... You can post in this thread also,
> Android Development and Hacking > Android Q&A, Help & Troubleshooting > [Q] How to root Huawei U8860(Honor) with Android 4.0
Good luck!
Thank you. Thread closed.
Related
Hi everyone,
I have a Ployer momo9 III tablet and I recently flashed a new ROM. The installation was successful and the tablet was able to boot-up to the main screen. The problem now is the touchscreen is not working (i can't type the keyboard or swipe the screen). I tried plugging a mouse using a USB-on-the-go converter and it was working fine.
I have run through the other similar threads but most of them involves custom ROM. And there were others that mentioned something about installing touchscreen firmware but i can't make sense of what the discussion is all about.
So let's cut to the chase. My questions:
(1) other than flashing the ROM, is there any other steps that i might have missed out? Example: driver installation, etc
(2) Now that the touchscreen is not functioning, what are the other options available for me to revive the tablet? I have tried flashing a custom ROM but it doesn't work. Maybe the ROM was not compatible.
(3) Appreciate if anyone would share a ROM that works on the Ployer momo9 III tablet.
FYI, i got the ROM from their official website (http://www.ployer.cn/cn/download_Gujian.aspx?DownloadID=63) but i have to admit that i am not sure if it is the correct ROM despite it labeled momo9 as it has several models to the momo9 line-up. I have tried contacting the manufacturer to get confirmation whether the ROM published on their website is compatible with my tablet but unfortunately there is no response.
Thanks in advance!!
Hi there,
I'm sorry, but I don't find anything related to your device, so please post your question in this forum for more relevants answers from the experts:
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck
Hi Razvan,
Thanks for the reply. Appreciate the help.
Thread closed, thank you.
Hello there everybody!
So I've recently bought my phone "Huawei G750-U10" running on this ridiculus MT6592 chipset.Since I just could not stand the stock 4.2.2 JB ROM I decided to flash a ported version of "Huawei G750-T00" KK ROM for my device (found it on some German website I guess "android-hilfe.com" if I'm not mistaken).Any way I flashed the damn thing after so many difficulties and literally EVERYTHING has gone better since 4.2.2 except for the fact that I cannot make calls due to the IMEI problem.Wifi works more consistantly ,bluetooth speed has improved slightly,and normally on 4.2.2 I'd have only around 800 MB of free RAM but It's increased to 1.1 GB of free RAM.I mean it's just pissing me off knowing that such a thing so tiny can ruin the day.I've Googled my problem , searched every each site you could think of but I don't seem to be able to get anywhere with it.The only thing I've not dared to do was reflashing a downloaded stock rom again (that just seem a little bit frightening) so to put this in a nutshell I've 3 questions:
1-Will I be able to fix this problem at all?
2-If so any working solutions for this specific version?
3-And will I be able to regain my baseband through flashing a downloaded stock rom?
P.S: Please post newbie-friendly comments.I'm not a pro! xD
Thanks for your sincere help in advance.
Hi there,
I'm sorry but I can't find anything related to your question/device.
Please post that in the forum bellow for more answers from the experts:
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck
Hello I am using a HTC M8(At&t) . It is Rooted and using AT&T stock HTC Sense ROM. When I receive an update that AT&T pushes it downloads completely, restarts into Clockworkmod Recovery and attempts to install. I wasn't able to capture all of what it says but from what I briefly read it didn't complete the instillation. AT&T pushed out a update that updates from 4.4.2 to 4.4.4 and I am assuming that is what the update is for. If that is the case it definitely did not update due to my Android version still being 4.4.2. I want this update to install because it will fix issues that I am having( Snapchat, and other odd glitches) If anyone can shed some light on my current issue that would be great. Maybe there is a way to manually flash an update? Ill be looking around and see what I can find..
Thanks in advance.
Hi there,
I'm sorry but I can't find anything related to your question except this thread where you can ask directly after register an account on XDA: i need freamware to update manual?
Or post that in the forum bellow for more answers from the experts:
AT&T One (M8) Q&A, Help & Troubleshooting
Good luck
Hello everyone,
I'm here today to SEEK HELP. I have bought a variant of Wiko Slide 2 aka Cloudfone Excite Prime here in the Philippines. I wanted to make my personal back for this device that is flashable via SPFlashTool. Or make ".img" files for short. I already know how to that on my previous devices but that was KK having 3.4.6 kernel. This is my first LOLLIPOP device that is why I needed some advice and help.
My questions are:
1. How will I know if my bootloader is locked?
2. Is it necissary to unlocK the bootloader so that I could make full back up?
3. Can I directly back up this via MTKDroidTools(the most convenient back up method I ever tried for MTK)? Since it is using different kernel.
4. How do I make custom recovery or CWM for Lollipop(kernel 3.10.x) based?
That would be all for now. Please help me I really don't know stuffs for Android L since it is different from older versions. Thank you :good:
Hi,
I can't find anything on your device here on XDA, aside from this thread, http://forum.xda-developers.com/android/help/help-root-wiko-slide-2-t3279083
I doubt that will help you, so I suggest you try asking all of your questions in one thread created here,
http://forum.xda-developers.com/android/help
Good luck!
Hi all
i have a problem, i have an old China phone Crescent CUBE 2 (MT6572 NAND ANDROID 4.4.2). Before flashing it i make Backup from Desktop then i flashed it with TECNO Firmware (ik i dont know anything about phones) then my phone bootloader broke, it dont start (just white screen). a few weeks after i format my pc and i forgotten to save my backup and yesterday i tried to download alot of firmware wich is MT6572 NAND ANDROID 4.4.2 too (Because i dont find my Model firmware in internet) But when i flash with SP-TOOL, flash progress and finnish without problem and the phone still no-start.
so i ask you : can other firmware wich have the same MT work to my phone? or can a custom rom work on it?
i ask you please help me to solve this problem....
iszadine said:
Hi all
i have a problem, i have an old China phone Crescent CUBE 2 (MT6572 NAND ANDROID 4.4.2). Before flashing it i make Backup from Desktop then i flashed it with TECNO Firmware (ik i dont know anything about phones) then my phone bootloader broke, it dont start (just white screen). a few weeks after i format my pc and i forgotten to save my backup and yesterday i tried to download alot of firmware wich is MT6572 NAND ANDROID 4.4.2 too (Because i dont find my Model firmware in internet) But when i flash with SP-TOOL, flash progress and finnish without problem and the phone still no-start.
so i ask you : can other firmware wich have the same MT work to my phone? or can a custom rom work on it?
i ask you please help me to solve this problem....
Click to expand...
Click to collapse
This forum is for...Technical discussion of Android development and hacking. No noobs, please. Device-specific releases should go under the appropriate device forum.
Note: Questions go in Q&A Forum
If you are posting a Question Thread post it in the Q&A forum. Technical discussion of Android development and hacking. No noobs, please. Device-specific releases should go under the appropriate device forum...
forum.xda-developers.com