Ok. Here is it. I have seen a stable build of Galaxy S2 GT-I9100G, REMEMBER IS (G)!!!! Don't reply me with the answer of S2 without the G, I'm asking the[G] Version. So the stable build was here http://download.cyanogenmod.com/?device=i9100g&type=stable for the [Direct Download: cm-9.1.0-i9100g.zip ] So i wondering if it really stable and safe. So, here the Question.
1ST:Is it safe to flash? Will it brick? Worth it? And what Android version IS IT?
2ND:Is this CWM Good, Working, and Safe to flash?So, i'm giving 2 link, (Not downloaded from here)=http://forum.xda-developers.com/showthread.php?t=1631934 and i found these word=This is a kernel including ClockworkMod Recovery for use on Samsung roms.
Don't use this kernel on aosp based roms like CyanogenMod!!!) And this link is where i'm downloaded the CWM and flashed it, http://forum.xda-developers.com/showthread.php?t=1683800 because of GT-I9100G_LP7_ClockworkMod-Recovery_5.5.0.4 it make me think it is the same from the first link i gave that have LP7 hacked, and i wonder it will it be also not support cynogenmod.
3RD: If the CWM at STEP 2 is not supported, What CWM that is work for SAMSUNG GALAXY S2 GT-I9100G and Flash able to cynogenmod with not PROBLEM!
4ST: Anyone have this on their Galaxy S2 GT-I9100G? Is everything WORKING FINE? Is the Performance and Battery Good?
5ST: Do i need to factory reset the phone before and after? And can anyone tell me the step if you can?
My phone is rooted and my battery is so bad and i wonder is this rom good for battery and performance. I'm afraid of bricking my phone because of the CWM. I installed cwm on galaxy 5 and it died. So This is important information to me. and PLEASE ANSWER ALL MY QUESTION CAREFULLY!
Dear Moderator or OP, Please Delet the same post i posted at general in Galaxy S2 Gt-i9100 forum.
Hi i am a big noob jejej i need help to install clockmod recovery on samsung galaxy s/sgh-t959v I have read the wiki of sgh-t959v
and i wanna install this ROM RemICS - UX ( http://forum.xda-developers.com/showthread.php?t=1766959 )
but I can not install clockmod recovery ( CWM 5.x Flashing via Recoveries (For CWM 5.x and above) )
I tried with the app .ROM Manager but the Samsung Galaxy s/sgh-t959v not supported. :crying::crying:
Would greatly appreciate if someone helps me to install this ROM on my phone Samsung Galaxy S/SGH-T959V
Sorry for my bad English
You need to flash one of the two kernels listed here http://forum.xda-developers.com/wiki/Samsung_Galaxy_S/SGH-T959V/Kernels via SGS Kernel Flasher which you can download for free in the play store. Then you will have to flash cyanogenmod 9 found here http://forum.xda-developers.com/showthread.php?t=1730954. After flashing the gingerbread kernel and then flashing the cm9 ROM, you will be able to flash the ROM you want. Follow the instructions on the threads according to the kernel or ROM. The Wiki is always the best way for answers.
AnAznBoy9724 said:
You need to flash one of the two kernels listed here http://forum.xda-developers.com/wiki/Samsung_Galaxy_S/SGH-T959V/Kernels via SGS Kernel Flasher which you can download for free in the play store. Then you will have to flash cyanogenmod 9 found here http://forum.xda-developers.com/showthread.php?t=1730954. After flashing the gingerbread kernel and then flashing the cm9 ROM, you will be able to flash the ROM you want. Follow the instructions on the threads according to the kernel or ROM. The Wiki is always the best way for answers.
Click to expand...
Click to collapse
ok thanks but to install CyanogenMod 9 need to have installed clockmod recovery How do I get this?
AnonymSoul said:
ok thanks but to install CyanogenMod 9 need to have installed clockmod recovery How do I get this?
Click to expand...
Click to collapse
By flashing a gingerbread kernel, you can boot to clockworkmod.
AnAznBoy9724 said:
By flashing a gingerbread kernel, you can boot to clockworkmod.
Click to expand...
Click to collapse
Thank you very much I followed all the steps you told me. works great !!! and now I have installed this ROM RemICS - UX v1.2 really appreciate your help thanks again :good::good::good: :laugh::laugh:
AnonymSoul said:
Thank you very much I followed all the steps you told me. works great !!! and now I have installed this ROM RemICS - UX v1.2 really appreciate your help thanks again :good::good::good: :laugh::laugh:
Click to expand...
Click to collapse
No problem.
AnonymSoul said:
Hi i am a big noob jejej i need help to install clockmod recovery on samsung galaxy s/sgh-t959v I have read the wiki of sgh-t959v
and i wanna install this ROM RemICS - UX ( http://forum.xda-developers.com/showthread.php?t=1766959 )
but I can not install clockmod recovery ( CWM 5.x Flashing via Recoveries (For CWM 5.x and above) )
I tried with the app .ROM Manager but the Samsung Galaxy s/sgh-t959v not supported. :crying::crying:
Would greatly appreciate if someone helps me to install this ROM on my phone Samsung Galaxy S/SGH-T959V
Sorry for my bad English
Click to expand...
Click to collapse
I understand that you've been helped, but you need to understand that it's important to read all the posts that are stickied in all sections...including the wiki.
You'd learn everything you need to know, and you wouldn't need to post a random thread.
Hello xda members,
i have a a31 Majestic tab 110n (i know bad choice), it has never been updated and the stock sofware sucks really bad. So i tried to install a custom recovery and ROM, Cm 10.2 from Christian Troy. I tried to flash from zip. sdcard TWRP for ONDA v792 but the touch didn't work. so i tried to install latest CWM and didnt get trough either. I couldnt flash with odin and phoenix cause locked bootloader. I ask you if there is a custom recovery and rom i can flash.
I hope i can get some answer here. i would really appreciate it. if there is any developer that can develope a compatible recovery i would pay him for sure.
I POST HW INFORMATION:
MOD. TAB 110N
PROC QuadCore A31Series
Android version 4.2.2
FIRMWARE VERSION 3.2_20130717
KERNEL VERSION 3.3.0
BUILD NUMBER A31S_Q1001L3_1307286.20130730
cotty88 said:
Hello xda members,
i have a a31 Majestic tab 110n (i know bad choice), it has never been updated and the stock sofware sucks really bad. So i tried to install a custom recovery and ROM, Cm 10.2 from Christian Troy. I tried to flash from zip. sdcard TWRP for ONDA v792 but the touch didn't work. so i tried to install latest CWM and didnt get trough either. I couldnt flash with odin and phoenix cause locked bootloader. I ask you if there is a custom recovery and rom i can flash.
I hope i can get some answer here. i would really appreciate it. if there is any developer that can develope a compatible recovery i would pay him for sure.
I POST HW INFORMATION:
MOD. TAB 110N
PROC QuadCore A31Series
Android version 4.2.2
FIRMWARE VERSION 3.2_20130717
KERNEL VERSION 3.3.0
BUILD NUMBER A31S_Q1001L3_1307286.20130730
Click to expand...
Click to collapse
Hi,
Unfortunately there isn't much info about your device that i can find and i see you already asked in the best place
thats your thread in Q&A section here http://forum.xda-developers.com/general/help/custom-recovery-custom-rom-troubles-t2885244
if anyone knows they will reply to your thread, it may be that you need to create your own custom recovery
if you choose to do this check out XDA_University and its forums for help
http://xda-university.com/
best of luck!
Hello All,
So I just had my Samsung SII plus (with NFC) rooted and find 2 recoveries installed CWM and TWRP, How can I safely remove CWM so I can have a smooth Flashing to a custom ROM?
I also find my self confused with acronymous used by TWRP but there is no description of it, can somebody tell me what is s2ve and s2vep, and which is better for my phone? I think the one installed is s2ve, how to exactly detrmine that?
Speaking of custom ROMs, is it better to choose Kitkat over lollipop as it's more stable ?
thanks.
Info & Review on Bluboo Mini
http://forum.xda-developers.com/gen...ive-photos-t3478832/post69091561#post69091561
----Place reserved for ROM and TWRP changes
Install standard MTK drivers.
http://forum.xda-developers.com/attachment.php?attachmentid=3945744&d=1479908355
Use the SPFlash Tool 1552, 1548
https://androidmtk.com/smart-phone-flash-tool
https://androidmtk.com/flash-stock-r...one-flash-tool
Load the Mini scatter file.
Turn off Mini
Press download only.
Connect phone through USB.
After completing flashing. close SPFlash Tool.
Disconnect
Restart the phone into recovery Vol+ and Power
Allow changes
Flash Supersu to root
restart phone into system
TWRP developed in cooperation with Jemmini in attached files
based on
5110D.Z4503B-Q-S1.V10.161028.MT6580MW.QHD.MY88.B125 / 2016年 10月 28日 星期五 16:31:20 CST
-----
Don't forget to hit thank you if you download the TWRP
Hey,
I'm getting a bootloop to TWRP. Can you help?
munky-head said:
Hey,
I'm getting a bootloop to TWRP. Can you help?
Click to expand...
Click to collapse
flash stock recovery, boot and perhaps pre-loader.
It will solve the problem..
But the TWRP works. Did you have a different ROM preinstalled?
Hit thank you if I helped
jan177 said:
Try to flash stock recover, boot and perhaps pre-loader.
It will solve the problem..
But the TWRP works. Did you have a different ROM preinstalled?
Click to expand...
Click to collapse
Where can I find them? Do you have perhaps?
munky-head said:
Where can I find them? Do you have perhaps?
Click to expand...
Click to collapse
I do not have MINI any more
But I tested TWRP .
Recovery is here
http://4pda.ru/forum/index.php?act=...&sort=rel&subforums=1&query=bluboo+mini&st=40
Perhaps this will turn out to be enough
I deleted files but I will ask about it
jan177 said:
I do not have MINI any more
But I tested TWRP .
Recovery is here
http://4pda.ru/forum/index.php?act=...&sort=rel&subforums=1&query=bluboo+mini&st=40
Click to expand...
Click to collapse
Managed to restore the phone, and attaching the files here too!
munky-head said:
Managed to restore the phone, and attaching the files here too!
Click to expand...
Click to collapse
Glad I could help.
Still think TWRP should work properly
jan177 said:
Glad I could help.
Still think TWRP should work properly
Click to expand...
Click to collapse
You're totally right!
After going back to the stock one, I have managed to follow through the TWRP installation, and now the phone is rooted and running.
Maybe there are different ROMs, so passing through the stock is the way to go around.
Do you have ANY ROM for Bluboo mini?
I have accidentaly wipe the phone... can you please share the ROM for Bluboo mini (stock or anything else...)
jacek71 said:
I have accidentaly wipe the phone... can you please share the ROM for Bluboo mini (stock or anything else...)
Click to expand...
Click to collapse
I do not have it any longer. Bluboo does not answer. I stopped buying their handsets.
I will ask but for now only
CyanogenMod 13 through TWRP
https://yadi.sk/d/27de9_vv38sFWb
jan177 said:
I do not have it any longer. Bluboo does not answer. I stopped buying their handsets.
I will ask but for now only
CyanogenMod 13 through TWRP
https://yadi.sk/d/27de9_vv38sFWb
Click to expand...
Click to collapse
I really like this phone for its size and price, it also looks nice, but in reviews it looks like the stock software is not that great. Could somebody make a quick review of it on CyanogenMod?
Does anyone know how to port a ROM to it?
This is an incredibly unique phone in today's market and I'd like to see it be supported by the developer/modder community.
Thanks!
solarkraft said:
I really like this phone for its size and price, it also looks nice, but in reviews it looks like the stock software is not that great. Could somebody make a quick review of it on CyanogenMod?
Does anyone know how to port a ROM to it?
This is an incredibly unique phone in today's market and I'd like to see it be supported by the developer/modder community.
Thanks!
Click to expand...
Click to collapse
I do not see any unique quality but
You can root your Mini by install of TWRP and Supersu and than install any ROM including Cyano through TWRP
jan177 said:
I do not see any unique quality but
You can root your Mini by install of TWRP and Supersu and than install any ROM including Cyano through TWRP
Click to expand...
Click to collapse
What is "any" ROM? How many are there for this device? I AM really glad there is TWRP available, so there certainly is a lot of potential.
Is there a place I can find more information about development for this phone (how to port a ROM, how did you port TWRP ...)?
Stock ROM for Bluboo Mini
jacek71 said:
I have accidentaly wipe the phone... can you please share the ROM for Bluboo mini (stock or anything else...)
Click to expand...
Click to collapse
A stock ROM was made available on the same 4PDA.ru pages as TWRP:
https://yadi.sk/d/YnXdivSZ37LKXU
bunchofdutch said:
A stock ROM was made available on the same 4PDA.ru pages as TWRP:
https://yadi.sk/d/YnXdivSZ37LKXU
Click to expand...
Click to collapse
This ROM with sound bug (no sound)
Sorry I meant, that custom rom CM13 with sound bug on 4pda.ru, NOT on official rom
Onthis link in russian, said that is sound bug
http://4pda.ru/forum/index.php?showtopic=778440&st=920#entry57144183
deivec said:
This ROM with sound bug (no sound)
Click to expand...
Click to collapse
Just wondering: Anyone else experiencing this no sound bug?
Is there a newer CM to that phone? Thanks!
BTW, there is a rom from 4pda.ru, it says it is a perfect rom for Bluboo Mini! Anyone tested that? https://yadi.sk/d/LNb-4-UC38yy6u
ugynok said:
Just wondering: Anyone else experiencing this no sound bug?
Is there a newer CM to that phone? Thanks!
BTW, there is a rom from 4pda.ru, it says it is a perfect rom for Bluboo Mini! Anyone tested that? https://yadi.sk/d/LNb-4-UC38yy6u
Click to expand...
Click to collapse
I do not know where u found it, but it even do not install
deivec said:
I do not know where u found it, but it even do not install
Click to expand...
Click to collapse
Found on 4pda.ru, maybe use twrp to install it.
ugynok said:
Found on 4pda.ru, maybe use twrp to install it.
Click to expand...
Click to collapse
So I have used not working
deivec said:
So I have used not working
Click to expand...
Click to collapse
What is the version of the TWRP that you are using?
Run TWRP Recovery and do Factory Reset - Data, Dalvik-Cache, Cache
Then go back to the main screen and go to the section "Install"
Select the firmware in .zip and move the slider and wait for the end of installation
After moving to the home screen and go to the "Restart" and restart the phone.
Can you tell us the details? How did you tried and what were the results? Thanks.