Database Info

Upgrading a Denver 70031

The official support goes as far as 4.0.4, is there any way i can upgrade it further?

borrow firmware for the TAC-90011
Litago said:
The official support goes as far as 4.0.4, is there any way i can upgrade it further?
Click to expand...
Click to collapse
Hi
Just borrow the firmware for the TAC-90011 its currently on 4.1.1
the hardware is the same besides the screen, I renamed the image file for the TAC-90011 to DENVER TAC-70031.img just for good measure and if flashed perfectly!!
Now my 70031 is smooth as "butter" for a (100$ pad at least) but it is a great upgrade and I haven't seen any problems yet

Thank you
MrAndersen83 said:
Hi
Just borrow the firmware for the TAC-90011 its currently on 4.1.1
the hardware is the same besides the screen, I renamed the image file for the TAC-90011 to DENVER TAC-70031.img just for good measure and if flashed perfectly!!
Now my 70031 is smooth as "butter" for a (100$ pad at least) but it is a great upgrade and I haven't seen any problems yet
Click to expand...
Click to collapse
It works perfectly thank you mate i like this new boot logo better

onnz423 said:
It works perfectly thank you mate i like this new boot logo better
Click to expand...
Click to collapse
You could also try :
[MOD] FaaastJB v2.5 - A13 Allwinner Jelly Bean 4.2.2 by Toxicro
http://www.techknow.me/forum/index.php?topic=5765.0
or
[ROM] CyanogenMod 10 for Allwinner a13 [08/28/13]
http://forum.xda-developers.com/showthread.php?t=2343531
Both work on the Denver since it's basically an A13 tab, just read the instructions carefully
I've tryed both and they are great!!

MrAndersen83 said:
You could also try :
[MOD] FaaastJB v2.5 - A13 Allwinner Jelly Bean 4.2.2 by Toxicro
http://www.techknow.me/forum/index.php?topic=5765.0
or
[ROM] CyanogenMod 10 for Allwinner a13 [08/28/13]
http://forum.xda-developers.com/showthread.php?t=2343531
Both work on the Denver since it's basically an A13 tab, just read the instructions carefully
I've tryed both and they are great!!
Click to expand...
Click to collapse
What version of CWM did you use when flashing CM10?
I have tried all the partition sizes (9, 10, 11) but in CWM i end up with "can't mount sd-card" and "can't mount emmc".... Any help is appreciated!

Widbert said:
What version of CWM did you use when flashing CM10?
I have tried all the partition sizes (9, 10, 11) but in CWM i end up with "can't mount sd-card" and "can't mount emmc".... Any help is appreciated!
Click to expand...
Click to collapse
Hello there,
i modified the recovery image so that those partitions can now be mounted. It still needs some tweaking though. Let me know if you need it and I'll post a link to the image.
Regards,
Wolfram

wolfram.hofmeister said:
Hello there,
i modified the recovery image so that those partitions can now be mounted. It still needs some tweaking though. Let me know if you need it and I'll post a link to the image.
Regards,
Wolfram
Click to expand...
Click to collapse
Yes please, link ?

Backup Rom on TAC-90011.
How to backup the ROM at TAC-90011? Before flashing I like to backup the rom.
The app ROM Manager don't show any compatible CWM.
Any link to a solution?

please help
onnz423 said:
It works perfectly thank you mate i like this new boot logo better
Click to expand...
Click to collapse
Hi there, I've been having problems with my TAC-10011 device and I'd like to try upgrading it to 4.1.1. as said
Could you please point me to instructions or a step by step guide to do this, coz it does not work with LiveSuit…
I get a Problem Indication without any words, just a yellow icon…
Thank you in advance for your help, peace!

Samsung Galaxy Young Duos S6312 Custom Rom

Hi there guys! The Galaxy Y Duos S6312 is relatively a new device & since it has already android jb 4.1.2 installed from stock... & a CWM is available in early stages we should have a new development thread for this device and maybe some custom roms on the way don't you think?

Mihail_Russian said:
Hi there guys! The Galaxy Y Duos S6312 is relatively a new device & since it has already android jb 4.1.2 installed from stock... & a CWM is available in early stages we should have a new development thread for this device and maybe some custom roms on the way don't you think?
Click to expand...
Click to collapse
Yeah, there are hardly any custom ROMs available for our device.

Hey bro...
Did u said the cwm recovery is available for our device. If its true then pls share the link wit me..i m in a need of it and waiting since june..

galibthegreat said:
Hey bro...
Did u said the cwm recovery is available for our device. If its true then pls share the link wit me..i m in a need of it and waiting since june..
Click to expand...
Click to collapse
Here you go buddy - http://forum.xda-developers.com/showthread.php?p=42739231

guyss...send me the link for some roms for s6312

no custom ROM for us

Hey guys! Will CM 10.## work on our device?

Yeah...! I'm Dying For It...!!
There is no custom rom, no bug free full functional recovery, no twrp recovery, no cyanogen mod and the worst part is no developer is paying attention. No response...! I dont know why the he** on earth xda isn't opening a New Device Thread. We need to get attention from the developers.

Custom ROM 6312
shampod said:
There is no custom rom, no bug free full functional recovery, no twrp recovery, no cyanogen mod and the worst part is no developer is paying attention. No response...! I dont know why the he** on earth xda isn't opening a New Device Thread. We need to get attention from the developers.
Click to expand...
Click to collapse
hey guys if u want custom rom for ur devices 6312
ask the developers here. they are making custom rom for 6310
http://forum.xda-developers.com/showthread.php?t=2550846

serious issue on S6312. PLS HELP
I flashed a wrong recovery image from cwm for my s6312 device by mistake (instead of flashing a mod I flashed a recovery image meant for a different phone). even that recovery zip flash went successful so I didnt doubt thinking I am actually flashing a mod. now when I gave restart system option, my phone does not turn on. (I guess it is hard bricked)
there is no vibration showing it turned on, cant boot into recovery or download mode using the combo key. but when I connect it to odin, it shows com13 and detects my phone...
however when I add rom and click on start, it stops at setup connection stage, no progress...
any help will be very much appreciated pls... and one more thing will a usb jig work to get it to download mode so I flash via odin
pls help me I am in a desperate situation.... thanks you so much for answers,..

sathesh26 said:
I flashed a wrong recovery image from cwm for my s6312 device by mistake (instead of flashing a mod I flashed a recovery image meant for a different phone). even that recovery zip flash went successful so I didnt doubt thinking I am actually flashing a mod. now when I gave restart system option, my phone does not turn on. (I guess it is hard bricked)
there is no vibration showing it turned on, cant boot into recovery or download mode using the combo key. but when I connect it to odin, it shows com13 and detects my phone...
however when I add rom and click on start, it stops at setup connection stage, no progress...
any help will be very much appreciated pls... and one more thing will a usb jig work to get it to download mode so I flash via odin
pls help me I am in a desperate situation.... thanks you so much for answers,..
Click to expand...
Click to collapse
Have u tried the one click unbricking tool ?
Sent from my GT-S6312 using Tapatalk

any updates on Custom Rom ??
anyone tried X-Sam Duos V1.0 rom
http://forum.xda-developers.com/showthread.php?t=2601838

Good rom
r2dak said:
any updates on Custom Rom ??
anyone tried X-Sam Duos V1.0 rom
http://forum.xda-developers.com/showthread.php?t=2601838
Click to expand...
Click to collapse
Yeah!! Ive tried it.
works great
everything works.
Way better than stock.

sagnikd96 said:
Yeah!! Ive tried it.
works great
everything works.
Way better than stock.
Click to expand...
Click to collapse
thanks im going to try it today did you found any other rom ??

r2dak said:
thanks im going to try it today did you found any other rom ??
Click to expand...
Click to collapse
Well threre trying to build cm 10/11 for s6310. When ready itll be functional except dual sim.
ref to:http://forum.xda-developers.com/showthread.php?t=2550846

Nice~

sagnikd96 said:
Yeah!! Ive tried it.
works great
everything works.
Way better than stock.
Click to expand...
Click to collapse
Hi man tried it and it working great, just want to ask you one question can i restore my nandroid backup of my stock rom on this rom

r2dak said:
Hi man tried it and it working great, just want to ask you one question can i restore my nandroid backup of my stock rom on this rom
Click to expand...
Click to collapse
Oh yes definitely
edit:not tried it but theoretically it should work

New ROM Coming
Hi,
I'm working on a new ROM for S6312.
I've already added and tested these features:
1. Force Kill App
2. Camera Shutter Sound Toggle
3. 4 Lockscreen Shortcuts
4. SMS-MMS Tweaks
5. Launcher Rotation
6. Lockscreen Rotation
7. AOSP Lockscreen (with Toggle)
8. Boot Animation
9. Battery Icon with Percentage
10. Home Button Lag Fix
11. Call and Message Block
12. Factory data reset password (Haven't tested this one yet)
13. Added Exit and Home button in default web browser
14. Folder view in messages
15. Wallpaper Scroll
16. Rearranged Toggles
Will try to add more features and post the ROM by this weekend.

New Custom ROM for S6312
Hi, my custom ROM of S6312 is now live on xda. Here is the link: http://forum.xda-developers.com/showthread.php?p=51520354
Do try it and give feedback.

[Q] phone crashed on taoshan

hi to all devs and members in the community,
i just want to raise my concern, a phone crashed occurs (blue screen) in some other time.
what would be the cause? does anyone know how to fix the problem?
it also creates a crashdump file that occupies around 858 mb.
i hope anyone can help,suggestions, and solutions.
thank you so much.
attached are the photos.

Known issue of 5.1 and 5.1.1 roms!
decoction said:
hi to all devs and members in the community,
i just want to raise my concern, a phone crashed occurs (blue screen) in some other time.
what would be the cause? does anyone know how to fix the problem?
it also creates a crashdump file that occupies around 858 mb.
i hope anyone can help,suggestions, and solutions.
thank you so much.
attached are the photos.
Click to expand...
Click to collapse
Everyone experiences them in 5.1.x roms. The problem is in system code. I myself returned to cm12 nightly because of these. Wait for Varun to fix it

Iasashvili said:
Everyone experiences them in 5.1.x roms. The problem is in system code. I myself returned to cm12 nightly because of these. Wait for Varun to fix it
Click to expand...
Click to collapse
thank you for your answer. maybe i can rerurn to nighlies.
by the way im running resurrection remix 5.1

Try Install another Rom
decoction said:
hi to all devs and members in the community,
i just want to raise my concern, a phone crashed occurs (blue screen) in some other time.
what would be the cause? does anyone know how to fix the problem?
it also creates a crashdump file that occupies around 858 mb.
i hope anyone can help,suggestions, and solutions.
thank you so much.
attached are the photos.
Click to expand...
Click to collapse
This is Rom problem ... try install another Rom search in XDA about final roms .. or from CyanogenMod Daownloads ..
Search about Taoshan rom .. this problem will solve ^_^

IzzatJaradat said:
This is Rom problem ... try install another Rom search in XDA about final roms .. or from CyanogenMod Daownloads ..
Search about Taoshan rom .. this problem will solve ^_^
Click to expand...
Click to collapse
Thank you, would it be possible to retain the custom kernel (thunderzap 4.14) everytime auto flash the updates of nightlies?. because the rom updates uses cyanogen recovery which my zip files are not working, so i have to go to bootloader and flash boot cwm recovery. is it a normal routine?
im currently using Philz Touch cwm recovery.

decoction said:
Thank you, would it be possible to retain the custom kernel (thunderzap 4.14) everytime auto flash the updates of nightlies?. because the rom updates uses cyanogen recovery which my zip files are not working, so i have to go to bootloader and flash boot cwm recovery. is it a normal routine?
im currently using Philz Touch cwm recovery.
Click to expand...
Click to collapse
flash boot.img in TZ Kernel Zip file .. by flashtool >> Fastboot
this will installing tz cmw recovery for your mobile to installing zip files .. like roms .. etc

Anyone got it solve "blue screen" in phone?
I updated to many ROMS v 5.x v 6.x v 7.x and the issue continues....

decoction said:
hi to all devs and members in the community,
i just want to raise my concern, a phone crashed occurs (blue screen) in some other time.
what would be the cause? does anyone know how to fix the problem?
it also creates a crashdump file that occupies around 858 mb.
i hope anyone can help,suggestions, and solutions.
thank you so much.
attached are the photos.
Click to expand...
Click to collapse
Hi
I have the same issue. Do you find a solution for this?

aflucche said:
Hi
I have the same issue. Do you find a solution for this?
Click to expand...
Click to collapse
Hi,
not yet. The problem just happens when i setup the lock screen.
Try to install the new ROM 7.1
Now It's a little better but not stop to reboot every time.
Sorry for my english.

(Custom Rom Ported By Me) Ressurection Remix Lollipop For Blu Studio M Hd and P5w

This project is discontinued, i dont own the phone and the tools anymore, what is done is done and what is not will never be. Thanks for using this.
Ported this rom for Blu Studio M Hd and Gionee P5w! MT6580
The base rom big thanks..is here: https://forum.xda-developers.com/hot-2/development/5-1-1-resurrection-remix-lp-5-5-9-hot-2-t3381766
You should go there and see features, bugs and screenshots!
Lollipop kernel 3.10 x
Stable running smooth!
Heres the download link: http://www.mediafire.com/file/33i4w493d7vm1ai/RR_5.5.9_blustudiomhd_by_edneyhelene.zip

Not getting installed
Please see the attachment for screen shot

harsh-sh!t said:
Please see the attachment for screen shot
Click to expand...
Click to collapse
And then I tried to install Stratum OS, it also showed some error. After that I rebooted to system and it bootloops.
Can anyone help me?

i dont know wich phone are u trying to use but on blu studio m hd and gionee p5w them both works without problems. I suggest you to please use twrp 3.0

It is Gionee P5W. It showed error that 'device or resource is busy' and installation ended with Error : 7
I was using twrp 3.0.2.
Now it is bootlooping and I don't know how to open recovery or fastboot:crying:

To open recovery all you have to do is to hold power + vol up and vol down while you turn device on !
i dont know what have u done but i tested and lot of people are using this rom without any problems.

If you still cant get into recovery you should use sp flash tools and flash the original rom on it.

jasonhelene said:
If you still cant get into recovery you should use sp flash tools and flash the original rom on it.
Click to expand...
Click to collapse
From where can I download stock rom?
I did a clean wipe(All except SD) before installing RR and it showed me an error!

i dont know whats wrong with your phone you might have had something wrong....
Here on gionee p5w there are lots of links with roms and even the stock one.

jasonhelene said:
i dont know whats wrong with your phone you might have had something wrong....
Here on gionee p5w there are lots of links with roms and even the stock one.
Click to expand...
Click to collapse
I think the recovery is not able to mount the system partition while flashing.
Please look at the ss(TWRP log) I attached above in my post.

Im using it on mine and its working, dont know how to help you... ill take a look at fstab on recovery

jasonhelene said:
Ported this rom for Blu Studio M Hd and Gionee P5w! MT6580
The base rom big thanks..is here: https://forum.xda-developers.com/hot-2/development/5-1-1-resurrection-remix-lp-5-5-9-hot-2-t3381766
You should go there and see features, bugs and screenshots!
Lollipop kernel 3.10 x
Stable running smooth!
Heres the download link: http://www.mediafire.com/file/33i4w493d7vm1ai/RR_5.5.9_blustudiomhd_by_edneyhelene.zip
Click to expand...
Click to collapse
Accelerometer not working man... D:
Awesome ROM otherwise
Any help would be appreciated

Teclast M40 GApps

Hey Guys , Recently I bought a new tablet (Teclast M40) and i couldn't help but notice that Google Apps aren't installed at all , and it's not really weird since we've gotten used to the absence of Google in most if not all of chinese phones and tablets ,Now here's my question ... How can i have Google Apps installed on my tablet ? is there any possible way?
I should mention tho that i tried to install (GSF, GPS, GAM) But with no luck, errors keep on occuring like (Google Play Services/Google Services Framework has stopped ...), Althought i did download the variants that are compatible with my tablet's ABI , I also tried the (Google Apps Installer) But it didn't work as well.
So i'm really left with no choice now , Any ideas?

You can install the rom with gapp included. Rom can be found here.
Installation guide is in the file. Steps are clear and quite easy to install.

Thank you so much , I'm gonna download it and try flashing it and come back with the result , but how'd u find the Rom? , i searched too much for it and came up with nothing .

jngiag said:
You can install the rom with gapp included. Rom can be found here.
Installation guide is in the file. Steps are clear and quite easy to install.
Click to expand...
Click to collapse
Thanks , The ROM been flashed successfully

AlexNA99 said:
Thanks , The ROM been flashed successfully
Click to expand...
Click to collapse
Can this rom be flashed on any version? I have the N9H1 on v1.00 and I'm having Bluetooth issues where my Bluetooth headset will connect, the sound will come out of the ear buds but the mic is only being picked up internally, not through the headset. Can you confirm if this is a problem with this rom?

Ztensa said:
Can this rom be flashed on any version? I have the N9H1 on v1.00 and I'm having Bluetooth issues where my Bluetooth headset will connect, the sound will come out of the ear buds but the mic is only being picked up internally, not through the headset. Can you confirm if this is a problem with this rom?
Click to expand...
Click to collapse
You gotta flash the Rom that's compatible with N9H1 which you can find Here, don't try flashing other version's Rom on your device, doing that might harm it.
As to the bluetooth mic problem i tried and yeah i have the same issue, i'm not sure how to solve this, but i suppose we gotta find an app that can control the mic input.

AlexNA99 said:
You gotta flash the Rom that's compatible with N9H1 which you can find Here, don't try flashing other version's Rom on your device, doing that might harm it.
As to the bluetooth mic problem i tried and yeah i have the same issue, i'm not sure how to solve this, but i suppose we gotta find an app that can control the mic input.
Click to expand...
Click to collapse
Thank you soooo much for the link and correct ROM. I flashed it from another website but it turned out to be an incorrect ROM. I'm hoping that Teclast does push another OTA. I was discussing with someone who has the N6H9 version and he said that he doesn't have any issues regarding the bluetooth so I don't really know.

AlexNA99 said:
Thanks , The ROM been flashed successfully
Click to expand...
Click to collapse
so now you have google play in your M40 ? thanks.

I know this version has Google Play working.

babybaby2 said:
so now you have google play in your M40 ? thanks.
Click to expand...
Click to collapse
Yes , GApps are installed by default

jngiag said:
You can install the rom with gapp included. Rom can be found here.
Installation guide is in the file. Steps are clear and quite easy to install.
Click to expand...
Click to collapse
I'm searching M40 firmware with GApps.
I found without GApps only
But the link in the post, I got a error message from OneDrive.
Please help me to upload another site, or so.

I found it on Hovatek!!
https://forum.hovatek.com/thread-20913.html
Thank you.

d_inoue said:
I found it on Hovatek!!
https://forum.hovatek.com/thread-20913.html
Thank you.
Click to expand...
Click to collapse
Yes, the owner has removed the link. There are a few versions of firmwares - N6H8, N6H9, without GAPP and with GAPP). Camera will not work if you flash N6H9 firmware on N6H8 device. Glad you found it elsewhere.

Thanks so much guys!!
The one in Hovatek ( Teclast M40 (M40_N9H1_Android 10.0_EEA_V1.00_SZ) ),
I successfully flashed and with a very clean google OS and PlayStore running fine !

hello i have m40 n6h8 and selfie (front camera) not working can i fix it with flashing any firmware ?
current version v1.01_20201130

How to download?

Hi, I've got N9H3, what's the difference from N9H1? Do you think it's safe to flash Novatek's N9H1 firmware, or better not gamble?
My M40 came with Google Apps / Play Store from the seller, but it's incredibly full of serious bugs and glitches. I have never seen such a buggy Android device yet. The Play Services sometimes enter a crash loop, and when it happens, the tablet can reset itself to factory defaults with literally zero user input. Amazing!