Upgrading a Denver 70031 - Android General

The official support goes as far as 4.0.4, is there any way i can upgrade it further?

borrow firmware for the TAC-90011
Litago said:
The official support goes as far as 4.0.4, is there any way i can upgrade it further?
Click to expand...
Click to collapse
Hi
Just borrow the firmware for the TAC-90011 its currently on 4.1.1
the hardware is the same besides the screen, I renamed the image file for the TAC-90011 to DENVER TAC-70031.img just for good measure and if flashed perfectly!!
Now my 70031 is smooth as "butter" for a (100$ pad at least) but it is a great upgrade and I haven't seen any problems yet

Thank you
MrAndersen83 said:
Hi
Just borrow the firmware for the TAC-90011 its currently on 4.1.1
the hardware is the same besides the screen, I renamed the image file for the TAC-90011 to DENVER TAC-70031.img just for good measure and if flashed perfectly!!
Now my 70031 is smooth as "butter" for a (100$ pad at least) but it is a great upgrade and I haven't seen any problems yet
Click to expand...
Click to collapse
It works perfectly thank you mate i like this new boot logo better

onnz423 said:
It works perfectly thank you mate i like this new boot logo better
Click to expand...
Click to collapse
You could also try :
[MOD] FaaastJB v2.5 - A13 Allwinner Jelly Bean 4.2.2 by Toxicro
http://www.techknow.me/forum/index.php?topic=5765.0
or
[ROM] CyanogenMod 10 for Allwinner a13 [08/28/13]
http://forum.xda-developers.com/showthread.php?t=2343531
Both work on the Denver since it's basically an A13 tab, just read the instructions carefully
I've tryed both and they are great!!

MrAndersen83 said:
You could also try :
[MOD] FaaastJB v2.5 - A13 Allwinner Jelly Bean 4.2.2 by Toxicro
http://www.techknow.me/forum/index.php?topic=5765.0
or
[ROM] CyanogenMod 10 for Allwinner a13 [08/28/13]
http://forum.xda-developers.com/showthread.php?t=2343531
Both work on the Denver since it's basically an A13 tab, just read the instructions carefully
I've tryed both and they are great!!
Click to expand...
Click to collapse
What version of CWM did you use when flashing CM10?
I have tried all the partition sizes (9, 10, 11) but in CWM i end up with "can't mount sd-card" and "can't mount emmc".... Any help is appreciated!

Widbert said:
What version of CWM did you use when flashing CM10?
I have tried all the partition sizes (9, 10, 11) but in CWM i end up with "can't mount sd-card" and "can't mount emmc".... Any help is appreciated!
Click to expand...
Click to collapse
Hello there,
i modified the recovery image so that those partitions can now be mounted. It still needs some tweaking though. Let me know if you need it and I'll post a link to the image.
Regards,
Wolfram

wolfram.hofmeister said:
Hello there,
i modified the recovery image so that those partitions can now be mounted. It still needs some tweaking though. Let me know if you need it and I'll post a link to the image.
Regards,
Wolfram
Click to expand...
Click to collapse
Yes please, link ?

Backup Rom on TAC-90011.
How to backup the ROM at TAC-90011? Before flashing I like to backup the rom.
The app ROM Manager don't show any compatible CWM.
Any link to a solution?

please help
onnz423 said:
It works perfectly thank you mate i like this new boot logo better
Click to expand...
Click to collapse
Hi there, I've been having problems with my TAC-10011 device and I'd like to try upgrading it to 4.1.1. as said
Could you please point me to instructions or a step by step guide to do this, coz it does not work with LiveSuit…
I get a Problem Indication without any words, just a yellow icon…
Thank you in advance for your help, peace!

Related

Are any of these Jelly Bean ROM for A510?

I found this file Acer_A510_AV041.RV28RC02_AV051.RV11RC01_WW_GEN1.zip and I can see that my A510 is running AV041.RV28RC02 but after that my ROM is named something else and I am on 4.0.3.
Actually found 2 files. The one mentioned here is 232MB and the other is 410MB containing recovery.img., system.img etc. and is named Acer_AV051_A510_1.034.00.rar
So are any of these Jelly Bean for A510?
They both are for A510.
Acer_A510_AV041.RV28RC02_AV051.RV11RC01_WW_GEN1.zip is an update for people currently running RV28RC02 only (like you are).
The other one Acer_AV051_A510_1.034.00.rar is a full ROM.
Can I ask where you found them ? could you provide a link please ?
paugustin said:
The other one Acer_AV051_A510_1.034.00.rar is a full ROM.
Can I ask where you found them ? could you provide a link please ?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=35187763&postcount=57
Stock ROM dumps Acer_AV051_A510_1.034.00 flex&system&stokcrecovery&boot
tolikvl said:
http://forum.xda-developers.com/showpost.php?p=35187763&postcount=57
Stock ROM dumps Acer_AV051_A510_1.034.00 flex&system&stokcrecovery&boot
Click to expand...
Click to collapse
Yes thats where I found that one. But I can for some reason not remember how to update my tablet without it being OTA
I have rooted and unlocked bootloader, so what do I need to update my A510?
I have tried with renaming to update.zip file but results in the dead Android with the red cross. My bootloader is ICS 04.04 and I tried with another recovery in Acer Recovery Installer v3.03 and same result.
WHat am my senile old brain forgetting??

Touch Screen and Camera are not working after flashing CM10 4.1.1

Hey Guys!!! I have flashed my Allwinner A10 Tablet from ICS 4.0.4 to 4.1.1 Jelly Bean ( latest realese by Christian Troy). But there is a big problem that touch screen is not working. Only I can use power and home button. Any idea?
Btw my tablet is Piranha Business Tab 10.1 but it says that Nexus 7 : D
I have tried all of them but got the same problem '' Touch Screen is not working ''
-cm9_nightly_20120913
-cm10_a10_20120902
-cm10_a10_20120913
I think you forgot to flash the compatibility fix zip, I am not really sure what tablet you have but if it is any of the ones listed on this thread below, just start over, make sure to flash cm, gapps and then the compatibility zip and everything will be fine.
http://forum.xda-developers.com/showthread.php?t=1821398
Just an advise, next time help us to help you, your thread title should reflect a general idea of your issue; also try to search the forums or google it, if I was able to find it, I sure you would be able too.
JakeOcn said:
I think you forgot to flash the compatibility fix zip, I am not really sure what tablet you have but if it is any of the ones listed on this thread below, just start over, make sure to flash cm, gapps and then the compatibility zip and everything will be fine.
http://forum.xda-developers.com/showthread.php?t=1821398
Just an advise, next time help us to help you, your thread title should reflect a general idea of your issue; also try to search the forums or google it, if I was able to find it, I sure you would be able too.
Click to expand...
Click to collapse
Sorry for the fault about the thread title!!
I havent seen my tablet at the list of Supported tablets. That's why i am not sure which compatibility zip that i need to use. i will try to find it random. I hope i can find it Thanks!!
I have used compatibility zip both '' Ainol Novo7 Elf compatibility and Eken T10 with mxc622x g-sensor '' but tablet doesnt get started.
I think my tablet is not a common model
Piranha Business Tab 10.1
1.4 GHz Cortex AllWinner A10 Cortex A8
16 GB Memory
10.1 inch
1 GB DDR3 RAM
HDMI 1080P
ARM Mali [email protected] 350Mhz 3D
Piranha Business Tab 10.1 already have option (from their website) for android 4.1 and you want cm10... don't understand?
mangkon64 said:
Piranha Business Tab 10.1 already have option (from their website) for android 4.1 and you want cm10... don't understand?
Click to expand...
Click to collapse
I have flashed 4.1 from their website but it's not stable ... I mean youtube doesnt work, fruit ninja, chrome, firefox, clockworkmod manager, google play shows only 70 apps for free popular apss for that tablet but i am pretty sure there is 500 apps on google play for free. sometimes launcher is not working well. chrome,firefox fruit ninja etc apps tablet says that ''those apps doesnt supported by that tablet '' ... and wi-fi has some problem, even next to router , tablet says that connection is so bad ... I can count so many problems ... I am trying to flash CyanogenMod 10 4.1.1 because it's totaly perfect. it has not kind of problems which i have mentioned before in this post.
Only problem is camera and touch screen don't work. but i can use it by plugging usb mause and it works fine. i hope you understand my problem ... Thanks!
I had the same prob I just restarted it and it worked!
Streetryders_2000 said:
I had the same prob I just restarted it and it worked!
Click to expand...
Click to collapse
How did you make it? Actually i dont know which compability zip i need to use, i have tried it randomom but no!!! İ dont know there is compability zip for my tablet Piranha Business Tab 10.1
SmiLeToLife said:
Sorry for the fault about the thread title!!
Click to expand...
Click to collapse
Please go to advance edition an modify the title of the thread.
poyensa said:
Please go to advance edition an modify the title of the thread.
Click to expand...
Click to collapse
Done ... sorry. Thanks!!
any solution?
Hey guys, any solution for this problem, please help us piranhazedes :'(
SmiLeToLife said:
Done ... sorry. Thanks!!
Click to expand...
Click to collapse

Bluboo Mini / Development & Support / TWRP

Info & Review on Bluboo Mini
http://forum.xda-developers.com/gen...ive-photos-t3478832/post69091561#post69091561
----Place reserved for ROM and TWRP changes
Install standard MTK drivers.
http://forum.xda-developers.com/attachment.php?attachmentid=3945744&d=1479908355
Use the SPFlash Tool 1552, 1548
https://androidmtk.com/smart-phone-flash-tool
https://androidmtk.com/flash-stock-r...one-flash-tool
Load the Mini scatter file.
Turn off Mini
Press download only.
Connect phone through USB.
After completing flashing. close SPFlash Tool.
Disconnect
Restart the phone into recovery Vol+ and Power
Allow changes
Flash Supersu to root
restart phone into system
TWRP developed in cooperation with Jemmini in attached files
based on
5110D.Z4503B-Q-S1.V10.161028.MT6580MW.QHD.MY88.B125 / 2016年 10月 28日 星期五 16:31:20 CST
-----
Don't forget to hit thank you if you download the TWRP
Hey,
I'm getting a bootloop to TWRP. Can you help?
munky-head said:
Hey,
I'm getting a bootloop to TWRP. Can you help?
Click to expand...
Click to collapse
flash stock recovery, boot and perhaps pre-loader.
It will solve the problem..
But the TWRP works. Did you have a different ROM preinstalled?
Hit thank you if I helped
jan177 said:
Try to flash stock recover, boot and perhaps pre-loader.
It will solve the problem..
But the TWRP works. Did you have a different ROM preinstalled?
Click to expand...
Click to collapse
Where can I find them? Do you have perhaps?
munky-head said:
Where can I find them? Do you have perhaps?
Click to expand...
Click to collapse
I do not have MINI any more
But I tested TWRP .
Recovery is here
http://4pda.ru/forum/index.php?act=...&sort=rel&subforums=1&query=bluboo+mini&st=40
Perhaps this will turn out to be enough
I deleted files but I will ask about it
jan177 said:
I do not have MINI any more
But I tested TWRP .
Recovery is here
http://4pda.ru/forum/index.php?act=...&sort=rel&subforums=1&query=bluboo+mini&st=40
Click to expand...
Click to collapse
Managed to restore the phone, and attaching the files here too!
munky-head said:
Managed to restore the phone, and attaching the files here too!
Click to expand...
Click to collapse
Glad I could help.
Still think TWRP should work properly
jan177 said:
Glad I could help.
Still think TWRP should work properly
Click to expand...
Click to collapse
You're totally right!
After going back to the stock one, I have managed to follow through the TWRP installation, and now the phone is rooted and running.
Maybe there are different ROMs, so passing through the stock is the way to go around.
Do you have ANY ROM for Bluboo mini?
I have accidentaly wipe the phone... can you please share the ROM for Bluboo mini (stock or anything else...)
jacek71 said:
I have accidentaly wipe the phone... can you please share the ROM for Bluboo mini (stock or anything else...)
Click to expand...
Click to collapse
I do not have it any longer. Bluboo does not answer. I stopped buying their handsets.
I will ask but for now only
CyanogenMod 13 through TWRP
https://yadi.sk/d/27de9_vv38sFWb
jan177 said:
I do not have it any longer. Bluboo does not answer. I stopped buying their handsets.
I will ask but for now only
CyanogenMod 13 through TWRP
https://yadi.sk/d/27de9_vv38sFWb
Click to expand...
Click to collapse
I really like this phone for its size and price, it also looks nice, but in reviews it looks like the stock software is not that great. Could somebody make a quick review of it on CyanogenMod?
Does anyone know how to port a ROM to it?
This is an incredibly unique phone in today's market and I'd like to see it be supported by the developer/modder community.
Thanks!
solarkraft said:
I really like this phone for its size and price, it also looks nice, but in reviews it looks like the stock software is not that great. Could somebody make a quick review of it on CyanogenMod?
Does anyone know how to port a ROM to it?
This is an incredibly unique phone in today's market and I'd like to see it be supported by the developer/modder community.
Thanks!
Click to expand...
Click to collapse
I do not see any unique quality but
You can root your Mini by install of TWRP and Supersu and than install any ROM including Cyano through TWRP
jan177 said:
I do not see any unique quality but
You can root your Mini by install of TWRP and Supersu and than install any ROM including Cyano through TWRP
Click to expand...
Click to collapse
What is "any" ROM? How many are there for this device? I AM really glad there is TWRP available, so there certainly is a lot of potential.
Is there a place I can find more information about development for this phone (how to port a ROM, how did you port TWRP ...)?
Stock ROM for Bluboo Mini
jacek71 said:
I have accidentaly wipe the phone... can you please share the ROM for Bluboo mini (stock or anything else...)
Click to expand...
Click to collapse
A stock ROM was made available on the same 4PDA.ru pages as TWRP:
https://yadi.sk/d/YnXdivSZ37LKXU
bunchofdutch said:
A stock ROM was made available on the same 4PDA.ru pages as TWRP:
https://yadi.sk/d/YnXdivSZ37LKXU
Click to expand...
Click to collapse
This ROM with sound bug (no sound)
Sorry I meant, that custom rom CM13 with sound bug on 4pda.ru, NOT on official rom
Onthis link in russian, said that is sound bug
http://4pda.ru/forum/index.php?showtopic=778440&st=920#entry57144183
deivec said:
This ROM with sound bug (no sound)
Click to expand...
Click to collapse
Just wondering: Anyone else experiencing this no sound bug?
Is there a newer CM to that phone? Thanks!
BTW, there is a rom from 4pda.ru, it says it is a perfect rom for Bluboo Mini! Anyone tested that? https://yadi.sk/d/LNb-4-UC38yy6u
ugynok said:
Just wondering: Anyone else experiencing this no sound bug?
Is there a newer CM to that phone? Thanks!
BTW, there is a rom from 4pda.ru, it says it is a perfect rom for Bluboo Mini! Anyone tested that? https://yadi.sk/d/LNb-4-UC38yy6u
Click to expand...
Click to collapse
I do not know where u found it, but it even do not install
deivec said:
I do not know where u found it, but it even do not install
Click to expand...
Click to collapse
Found on 4pda.ru, maybe use twrp to install it.
ugynok said:
Found on 4pda.ru, maybe use twrp to install it.
Click to expand...
Click to collapse
So I have used not working
deivec said:
So I have used not working
Click to expand...
Click to collapse
What is the version of the TWRP that you are using?
Run TWRP Recovery and do Factory Reset - Data, Dalvik-Cache, Cache
Then go back to the main screen and go to the section "Install"
Select the firmware in .zip and move the slider and wait for the end of installation
After moving to the home screen and go to the "Restart" and restart the phone.
Can you tell us the details? How did you tried and what were the results? Thanks.

Cyanogenmod ROMS for Galaxy Tab 3 .7.0 SMT210

Hi, im looking for a Cyanogenmod ROM for my Tab 3 7.0 (SM-T210), but all roms I found are based on KitKat. Do you know about a Lollipop or Marshmallow based ROM? Im right now with Dragon ROM but I don´t like it too much. I want something more clean like CM.
If u have download links for these ROMs I´ll be grateful. :good:
santiagoalbar15 said:
Hi, im looking for a Cyanogenmod ROM for my Tab 3 7.0 (SM-T210), but all roms I found are based on KitKat. Do you know about a Lollipop or Marshmallow based ROM? Im right now with Dragon ROM but I don´t like it too much. I want something more clean like CM.
If u have download links for these ROMs I´ll be grateful. :good:
Click to expand...
Click to collapse
CyanogenMod 12 for your android.
https://devs-lab.com/cyanogenmod-12-1-rom-for-samsung-galaxy-tab-3-7-0.html
Did you install the ROM on the SM-T210?
Does it work?
Simple2002 said:
Did you install the ROM on the SM-T210?
Does it work?
Click to expand...
Click to collapse
I will wait too
Nonayno said:
I will wait too
Click to expand...
Click to collapse
Hi I just attempted to flash this rom with TWRP v2.8.0.0 but it failed to finish. It says "E : Error executing updater binary in zip ' /sdcard/Download/Resurrection-Remix-LP-v5.5.8-20151025-1 t021tespr.zip' " I don't know what the issue is. But I'll do more research.
Deathstrok2579 said:
Hi I just attempted to flash this rom with TWRP v2.8.0.0 but it failed to finish. It says "E : Error executing updater binary in zip ' /sdcard/Download/Resurrection-Remix-LP-v5.5.8-20151025-1 t021tespr.zip' " I don't know what the issue is. But I'll do more research.
Click to expand...
Click to collapse
That rom is not for 210
You need CM11, thats the only custom rom for this tablet thats NOT samsung based, but the cameras dont work. Doesnt bother me that, and the screen backlight stays on slightly unless you use auto brightness and greenify to turn it off once the screen goes off. Apart from that, everything else is better.

Any high performing roms out there, or should I retire my TF300?

So my TF300 is running slower for each day. Is there any hope left?
Ive tried kat kiss and cyanogenmod different versions.
Most of the time I'm running twitch, or youtube.
I gave up browsing the web, everything is way too sluggish.
So what rom do you recommend for best performance?
sliddjur said:
So my TF300 is running slower for each day. Is there any hope left?
Ive tried kat kiss and cyanogenmod different versions.
Most of the time I'm running twitch, or youtube.
I gave up browsing the web, everything is way too sluggish.
So what rom do you recommend for best performance?
Click to expand...
Click to collapse
I would go back to KatKiss (as it is the best ROM there is for the TF300T right now and possibly the last one of that quality as well) if I were you. You can try an app that let's you make additional Swap space whether it be a file or partition on your external SD card. I did this on my Amazon Fire 7 2015 KFFOWI, and it made a noticeable difference with a 2GB swap file. I will be trying it on the TF300T next.
Im in the same boat. I keep coming back to katkiss because it has the battery dock support. I hate not knowing how much I have left in there. Im itching to try something new and different with better speed, but so far... no luck
sliddjur said:
So my TF300 is running slower for each day. Is there any hope left? So what rom do you recommend for best performance?
Click to expand...
Click to collapse
To my opinion the best CR is KatKiss - Nougatella by Timduru and I think I'm not alone. This rom will give your device a new life. There is a thread you may read carefully: https://forum.xda-developers.com/transformer-tf300t/development/rom-t3453702
Please note, your Tablet must be on the latest Asus stock rom Jelly Bean 4.2. with bootloader unlocked. Custom recovery must be Kang TWRP [email protected] If it is so, please follow the install instruction in post #1 of the mentioned thread carefully step by step.
ebonit said:
To my opinion the best CR is KatKiss - Nougatella by Timduru and I think I'm not alone. This rom will give your device a new life. There is a thread you may read carefully: https://forum.xda-developers.com/transformer-tf300t/development/rom-t3453702
Please note, your Tablet must be on the latest Asus stock rom Jelly Bean 4.2. with bootloader unlocked. Custom recovery must be Kang TWRP [email protected] If it is so, please follow the install instruction in post #1 of the mentioned thread carefully step by step.
Click to expand...
Click to collapse
Yea I second the notion for KatKiss, it is the best one for our device right now and has great support as well. I paired the ROM with some tweaks from L Speed and it is great and very fast compared to how it was previously. Also, @timduru is an awesome dude and really cares about the users and the community so you can't go wrong using a ROM he develops.
@rjmxtech
 @ebonit
Yeah actually I already have Kat kiss nougat by that dude. Version 7.1. I used TWRP 2.8 to install ROM.
I've used loads of different roms before this one. Does it matter what boot loader I am installing rom with?
How can I make sure install is as it should be? Should partitions etc be a specific size?
Just upgraded to TWRP 3.1. Should that be an issue? Should I install ROM one again?
sliddjur said:
Just upgraded to TWRP 3.1. Should that be an issue? Should I install ROM one again?
Click to expand...
Click to collapse
No, TWRP 3.1 shouldn't be an issue!
If you did follow the install instruction in post #1 carefully and did format /Data and then changed file system for Data to F2FS through Kang TWRP, you don't need to run the install process once again.
I had never enabled F2FS before. Now my tablet is working better than ever before. Thanks man!
sliddjur said:
I had never enabled F2FS before. Now my tablet is working better than ever before. Thanks man!
Click to expand...
Click to collapse
You are welcome! I'm glad to hear of your success. :good:
Using the "Thanks" button is greatly appreciated!

Categories

Resources