Related
This zip installs the QuickRemote app and enables the IR blaster to work on AOSP Lollipop ROMs for the LG G3 (and G2). Not every device or rom has been tested, so flash at your own risk.
Credits go to @sefnap for the original G2 port, @RieGo for the original scripts, and @zzeneg for updating to the G3 versions.
WORKAROUND DETAILS:
The default SELinux policy for android was changed to enforcing mode in Lollipop to increase security. This restricts the functionality of some apps, so for QuickRemote to work we have to change the SELinux policy back to permissive mode until we have a better solution.
This zip installs an init.d script which runs at boot and sets the SELinux policy, as well as other permissions. It will also create the file /sdcard/QRemote.log, which records the SELinux policy at startup.
INSTRUCTIONS:
--Make a backup (or at least download the uninstall)
--Install the latest SuperSU (highly recommended)
--Wipe dalvik/cache (just in case)
--Flash zip in recovery (TWRP or PhilZ)
--Reboot--
--It may take a moment for device manufacturers to load, so be patient.
TROUBLESHOOTING:
First, make sure init.d is enabled:
-Check for /sdcard/QRemote.log. If the file isn't there, the init.d script did not run.
---Enable init.d support with this app
-If it still isn't working after enabling init.d and rebooting, verify that SELinux was set to permissive at boot in QRemote.log
---Try this app to set the SELinux policy instead.If the QuickRemote app force closes when you open it:
-Make sure QuicksetSDK is installed. It won't be in the app drawer, so check Setting->Apps->All
-Clear QuicksetSDK data, delete /sdcard/Quickset Setup, reboot
Thanks to everyone in this thread for helping figure this thing out!
Working perfect on liquid smooth rom, thanks for posting this!
Thanks so much for posting this. Not being able to use Smart IR on AOSP has been killing me. I absolutely hate my LG TV remote. Will be testing on Beanstalk this evening.
confirm working for d855 on cm11... thanks
Any chance of a working QuickCircle port for AOSP?
It's the only thing that's holding me back from installing CM11. I refuse to give up on this case since I paid so much money for it god damn it
Thanks, it's work !
L10nH34Rt said:
Any chance of a working QuickCircle port for AOSP?
It's the only thing that's holding me back from installing CM11. I refuse to give up on this case since I paid so much money for it god damn it
Click to expand...
Click to collapse
I hope too. But I think on the G2 the quickwindow cover working on CM11 . Wait and see..
Quickset SDK has stopped.
Sent from my LG-D850 using XDA Free mobile app
Anyone tested this on CM12 yet?
if4ct0r said:
Anyone tested this on CM12 yet?
Click to expand...
Click to collapse
It isn't compatible with ART.
Joey43 said:
It isn't compatible with ART.
Click to expand...
Click to collapse
Sorry. I guess "- ART is supported" is a little misleading.
if4ct0r said:
Sorry. I guess "- ART is supported" is a little misleading.
Click to expand...
Click to collapse
I tried it on 5.0 and resulted in force closes and a broken app. Go ahead and download both files, if they work yippee, if not just flash the uninstall.
And let us know!
Sent from my LG-D851 using Tapatalk
if4ct0r said:
Sorry. I guess "- ART is supported" is a little misleading.
Click to expand...
Click to collapse
KitKat Art, and Lollipop Art, are two different creatures. I'd think that a port of the Lollipop version of this remote from the g3 leaks should work.
dictionary said:
KitKat Art, and Lollipop Art, are two different creatures. I'd think that a port of the Lollipop version of this remote from the g3 leaks should work.
Click to expand...
Click to collapse
Well, if it wouldn't, it wouldn't be a port, am I right?
I tried flashing it on Lollipop and using a different remote App and that didn't work either, even though the App recognized that the G3 has an IR-Blaster.
Guys, if you use a custom rom like CM12, you can make the flashable zip to work by doing the following.
First flash it normally, then grab from XDA the LGs lollipop version of QuicksetSDK, I think there should be a lollipop version, but I copied it from Android HD rom. Then replace the KitKat version with lollipop in in the System/app folder, set the correct permissions and voila it works. I have tested it on my Sony TV, it works like a charm. Good thing is that Smart Remote IR also works if interested to try.
Here's the Quickremote zip with the updated QuicksetSDK (For CM12!):
http://www.mediafire.com/?bbfbfefbnj7bj7k
I hope you don't mind me uploading this here @zzeneg, all credits are going to you! If you want me to, I'll take it offline immediately.
I think it should work on any 5.0 AOSP-Rom.
For some reason my IR-Blaster isn't working, the app launches, but the IR-Blaster just doesn't work.
Xerionius said:
Here's the Quickremote zip with the updated QuicksetSDK (For CM12!):
http://www.mediafire.com/download/bb...moteG3CM12.zip
I hope you don't mind me uploading this here @zzeneg, all credits are going to you! If you want me to, I'll take it offline immediately.
I think it should work on any 5.0 AOSP-Rom.
For some reason my IR-Blaster isn't working, the app launches, but the IR-Blaster just doesn't work.
Click to expand...
Click to collapse
Thanks mannnnnn. Now when it works I'll be happy. I wonder if it'll have a widget for pulldown
Sent from my LG-D851 using Tapatalk
---------- Post added at 12:57 AM ---------- Previous post was at 12:54 AM ----------
I wonder if the quick circle stuff can be added to cm
Sent from my LG-D851 using Tapatalk
Xerionius said:
Here's the Quickremote zip with the updated QuicksetSDK (For CM12!):
http://www.mediafire.com/download/bb...moteG3CM12.zip
I hope you don't mind me uploading this here @zzeneg, all credits are going to you! If you want me to, I'll take it offline immediately.
I think it should work on any 5.0 AOSP-Rom.
For some reason my IR-Blaster isn't working, the app launches, but the IR-Blaster just doesn't work.
Click to expand...
Click to collapse
link down?
rickriego said:
link down?
Click to expand...
Click to collapse
This is weird, the file wasn't down but the link changed.
I updated it, here's the new one: http://www.mediafire.com/?bbfbfefbnj7bj7k
Xerionius said:
This is weird, the file wasn't down but the link changed.
I updated it, here's the new one: http://www.mediafire.com/?bbfbfefbnj7bj7k
Click to expand...
Click to collapse
Getting a 38 kb file that won't flash? Tried downloading three times
Those of you who haven't yet got Lollipop can try the new Calculator as I have just ported it
They're aren't any new features (at least not any obvious ones than I can spot) but it does look better
It should work on any 4.4.x ROM but only tested on CyanogenMod 11 (4.4.4)
Of course, the vast majority of the credit goes to the AOSP team, all I did was edit some code to make it compatible
It CAN be installed alongside your system calculator app, the package name is different
hamzahrmalik said:
Those of you who haven't yet got Lollipop can try the new Calculator as I have just ported it
They're aren't any new features (at least not any obvious ones than I can spot) but it does look better
It should work on any 4.4.x ROM but only tested on CyanogenMod 11 (4.4.4)
Of course, the vast majority of the credit goes to the AOSP team, all I did was edit some code to make it compatible
It CAN be installed alongside your system calculator app, the package name is different
Click to expand...
Click to collapse
Hi Hamzah,
I've been trying to build the calculator too but failed miserably. I did, after hours of work, manage to get it running but the layout was entirely skewed. Would you be okay with pushing the source code to Github so we can see and learn?
Great work! Thank you. (Now if only someone managed to port the calculator and dialler.)
@hamzahrmalik can you plz try to port lollipop clock
mridang said:
Hi Hamzah,
I've been trying to build the calculator too but failed miserably. I did, after hours of work, manage to get it running but the layout was entirely skewed. Would you be okay with pushing the source code to Github so we can see and learn?
Great work! Thank you. (Now if only someone managed to port the calculator and dialler.)
Click to expand...
Click to collapse
Will push when I have time
I literally just copied all the code
Just added support library and removed lollipop specific code
I also tried dialer but its way to complex and I don't really have the time
reversegear said:
@hamzahrmalik can you plz try to port lollipop clock
Click to expand...
Click to collapse
I tried clock yesterday but it's a much more complex app
Sent from my amazingly awesome OnePlus One using Tapatalk
mridang said:
Hi Hamzah,
I've been trying to build the calculator too but failed miserably. I did, after hours of work, manage to get it running but the layout was entirely skewed. Would you be okay with pushing the source code to Github so we can see and learn?
Great work! Thank you. (Now if only someone managed to port the calculator and dialler.)
Click to expand...
Click to collapse
Heres the commit to make it compatible
https://github.com/hamzahrmalik/lol...mmit/d18262b4bfed6a2c3b7d3d015551041188244e85
Big thanks man. Working on 4.4.2 touchwiz stock rom samsung ? And i need replace calculater app ? Need root ?
KemalALKIN said:
Big thanks man. Working on 4.4.2 touchwiz stock rom samsung ? And i need replace calculater app ? Need root ?
Click to expand...
Click to collapse
Don't need root
I did say it doesn't replace it
Sent from my amazingly awesome OnePlus One using Tapatalk
op did you try the dialer yet?
I'm so xcited if you can do it
zamzameir said:
op did you try the dialer yet?
I'm so xcited if you can do it
Click to expand...
Click to collapse
Will try when I get time
Sent from my amazingly awesome OnePlus One using Tapatalk
hamzahrmalik said:
Will try when I get time
Click to expand...
Click to collapse
dude, are you done?
xehed said:
dude, are you done?
Click to expand...
Click to collapse
Clearly not
Sent from my amazingly awesome OnePlus One using Tapatalk
How to get Viper4Android working on Lollipop ROMs
I want to start the thread off by stating that I DID NOT develop this mod myself. Full credit for the work goes to @FuMMoD for the updates for V4A’s .apk and libraries. Also to @//.dax for the new icon. @AndrasLOHF for the thread that lists the original .zip files we’ll be flashing, also the Viper4Android team for making this app in the first place. This thread is simply a detailed, in-depth guide with a video to help people install what they created. Links to the original threads are below. Please visit it for more information and help. This wouldn’t have been possible without these people.
I’ve personally tested this method on many ROMs based off of CM12 on my Samsung Galaxy S4 GT-i9500 and it’s worked every time. If it doesn’t work for your ROM, post details and I’ll look into it. Most people have tried this method on their Nexus 5 and reported success.
Stock users!! If you use a ROM based on TouchWiz or other ROMs with a stock kernel that is set to "Enforcing", there is a chance step #3 will fail! Please read Q6 in the F.A.Q. below for help on this! This is NOT a V4A problem! And it CAN be fixed usually! Read carefully!
Please do not post that this isn't working for you unless you are 100% sure you did the steps exactly like I mentioned. Read the F.A.Q. first to make sure. Visit the thread links below for more help. It should theoretically work on all Lollipop ROMs.
Please follow this carefully step by step or this may not work for you. If you ARE sure you did these steps correctly and it still didn't work (I don't see why it wouldn't), post your device information and ROM details and I'll look into it.
I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed.
Please do some research if you have any concerns about features included in this ROM before flashing it!
YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.]
Let's get started.
Things you'll need:
1. A lollipop ROM. (duh)
2. Root access.
3. Custom recovery. (Any recovery should work as long as it can flash .zip files)
I would recommend reading the F.A.Q. before you do this!
Here's a video tutorial I made to make things easier to understand:
Here are the steps:
Head into your settings, and go to about device. Look for the SELinux status. If it says either “Permissive” or “disabled”, move on to step 4. If it says “Enforcing”, go to step 2.
Download and install “SELinux Mode Changer” from the Play Store (link in post two)
Open the app you just installed, and tap on “Permissive”. Grant root access when and if prompted, then reboot the device. <--If this does not work, read question 6 of the F.A.Q. below.
Go to post two, and download “Viper4Lollipop.zip” from any of the mirrors listed. (Request for more mirrors).
Go into app drawer, and disable “Audio FX”, or “DSP Manager” or “Music FX” depending on your ROM.
Disable stock music player. <--Read question 1 of the F.A.Q. below to see why you have to do this.
Go to developer options, and uncheck “Use NuPlayer”.
Reboot device into recovery.
Flash the “Viper4Lollipop.zip” you downloaded. Wipe dalvik/cache. Reboot.
Open the V4A app from the app drawer, and install drivers when prompted after granting root access. Reboot once it’s done.
Go to play store and download any third party music app. (Shuttle Player or Google Play Music are good options.)
Enjoy the sweet sound of V4A on your Lollipop ROM.
F.A.Q.
Q1: Why do I need to disable the stock music app?
A: V4A causes force closes when using the stock music app. You CAN try another .zip (see post two and question 2 of F.A.Q.) which fixes this issue, but the disadvantage of that is that you might lose Chromecast functionality. Moreover, I never tried this personally so I can’t help you if you flash the other one and it doesn’t work. For anyone who wants to try a more complex approach and keep stock music player compatibility, see post #20 by @mholloway.
Q2: What is the difference between the recommended .zip and alternate .zip?
A: The recommended one will break stock music app, but it’ll work fine otherwise. The alternate one MIGHT fix the stock music app, but you might lose Chromecast functionality. Refer to the original thread for more details on this.
Q3: Will this cause any bricks or bootloops?
A: Absolutely no. It shouldn't. Never bricked mine.
Q4: How do I remove this?
A: Uninstall V4A drivers, then delete the app from the root directory.
Q5: Why does the volume go down on some screens?
A: This isn’t a problem with V4A. This is because of Google Now conflict or any other app that uses the microphone. It happens on some ROMs and they are the problems. Example: Volume went down for me on GearCM but not on Euphoria OS. Fix? Disable "OK Google" hot-word detection or disable/stop apps that use the microphone.
Q6: The kernel won't change to permissive.
You're not alone. Some people reported this doesn't work on some stock ROMs. This is because of the stock kernel on some stock ROMs (mostly Samsung) that cannot be changed to permissive. At this point, your best bet is to try a different kernel for your phone and ROM. A simple Google search will help you with that. Thanks to @banccalif in post #15 for the suggestion.
Watch the video if the steps seem complicated to you. If you're gonna tell other people about this, please link back to this thread.
Enjoy V4A for Lollipop and be sure to check out the thread in post two and thank the devs. They’re the geniuses who did this. :good:
Links
Download and other links:
SELinux Mode Changer:
https://play.google.com/store/apps/details?id=com.mrbimc.selinux&hl=en
Viper4Lollipop: Updated links! (25/09/2016)
https://goo.gl/d923u2 <-- MEGA.CO.NZ mirror
http://www.mediafire.com/file/46dd7ddcpqc8s8d/Viper4Lollipop_v2.3.3.0.zip <-- MediaFire mirror
Main thread link:
http://forum.xda-developers.com/google-nexus-5/themes-apps/discussion-viper4android-t2543796
Official Viper4Android thread:
http://forum.xda-developers.com/showthread.php?t=2191223
Does this work on alemtro Aurora lollipop rom for i9500?
Bugz1 said:
Does this work on alemtro Aurora lollipop rom for i9500?
Click to expand...
Click to collapse
On that particular ROM? No. I have not. But it worked on 100% of Lollipop ROMs I've tried.. CM12, GearCM, Resurrection Remix and Euphoria. Worked just fine. If you do decide to try it, do post results.
I am not able to disable or change selinux to permissive on this rom
Bugz1 said:
I am not able to disable or change selinux to permissive on this rom
Click to expand...
Click to collapse
Even with that app? I don't think you can disable it if it's set to enforcing, only to permissive.. But I don't know why you're not able to set it to permissive from enforcing though.. :/ Try asking in the ROM forum? Mine was disabled from the beginning so I had no troubles with this. But everyone who has had it to enforcing WAS able to change it with that app. :/
I guess it would not change on touchwiz based roms
Bugz1 said:
I guess it would not change on touchwiz based roms
Click to expand...
Click to collapse
Never tried this on a TouchWiz based ROM, but the app should still theoretically work. :/ Have you disabled Knox if you have it?
TheXGX said:
Never tried this on a TouchWiz based ROM, but the app should still theoretically work. :/ Have you disabled Knox if you have it?
Click to expand...
Click to collapse
I always disable knox even if its not required
Bugz1 said:
I always disable knox even if its not required
Click to expand...
Click to collapse
Kudos to that. xD But anyway.. Then idk why it won't work man.. :/ I just flashed Euphoria OS today and it's working just fine. Like it was on my Resurrection Remix ROM before this.
Cool. I'm thinking of using a cm based rom simply because i want to use v4a but the only thing i don't like about cm based roms is that the contacts on my sim don't show up in the contacts app
Bugz1 said:
Cool. I'm thinking of using a cm based rom simply because i want to use v4a but the only thing i don't like about cm based roms is that the contacts on my sim don't show up in the contacts app
Click to expand...
Click to collapse
Really? I didn't even know it has that problem lol All my contacts are synced with Google since I flash ROMs all the time and don't have patience to backup phone contacts every time I do.. And my SIM could never accommodate my 300+ contacts. But if it helps, @BlaqueDroid's Euphoria OS I'm using now is pretty nice if you wanna try it out. :good:
Hey man, I'd like to ask ya, I've installed 2.3.4.0 , on stock player the processing is working BUT when I'm using TTpod then writes NO, on 2.3.3.0 was working.so if i flash the V4A patch compatibility zip might work?
Στάλθηκε από το LG-D802 μου χρησιμοποιώντας Tapatalk
TheXGX said:
Really? I didn't even know it has that problem lol All my contacts are synced with Google since I flash ROMs all the time and don't have patience to backup phone contacts every time I do.. And my SIM could never accommodate my 300+ contacts. But if it helps, @BlaqueDroid's Euphoria OS I'm using now is pretty nice if you wanna try it out. :good:
Click to expand...
Click to collapse
Cool beans bro. Will test that rom as soon as i get a chance
TheXGX said:
Never tried this on a TouchWiz based ROM, but the app should still theoretically work. :/ Have you disabled Knox if you have it?
Click to expand...
Click to collapse
It's about the kernel.. If it's a stock kernel, it will not change to permissive. I'm on a stock based tw rom with a custom kernel and I'm fully functional on v4a
vrwmiaris1 said:
Hey man, I'd like to ask ya, I've installed 2.3.4.0 , on stock player the processing is working BUT when I'm using TTpod then writes NO, on 2.3.3.0 was working.so if i flash the V4A patch compatibility zip might work?
Στάλθηκε από το LG-D802 μου χρησιμοποιώντας Tapatalk
Click to expand...
Click to collapse
I dunno what patch compatibility zip you are talking about. The zip in this thread contains the full app along with modified and additional binaries. FYI, the app included is 2.3.3.0 and not 2.3.4.0. I haven't gotten around to update it yet, but if it helps, I just installed TTPod on my Galaxy S4 i9500 running CM12 to test it and it's working perfectly like you said.
banccalif said:
It's about the kernel.. If it's a stock kernel, it will not change to permissive. I'm on a stock based tw rom with a custom kernel and I'm fully functional on v4a
Click to expand...
Click to collapse
Updated OP. Thanks.
banccalif said:
It's about the kernel.. If it's a stock kernel, it will not change to permissive. I'm on a stock based tw rom with a custom kernel and I'm fully functional on v4a
Click to expand...
Click to collapse
@banccalif can you send me a link to the custom kernel that you are using? I never dealt with kernels before. Is it the regular flashing process with custom recovery?
---------- Post added at 09:06 AM ---------- Previous post was at 08:38 AM ----------
Also are you using tw based lollipop rom for i9500?
Bugz1 said:
@banccalif can you send me a link to the custom kernel that you are using? I never dealt with kernels before. Is it the regular flashing process with custom recovery?
---------- Post added at 09:06 AM ---------- Previous post was at 08:38 AM ----------
Also are you using tw based lollipop rom for i9500?
Click to expand...
Click to collapse
I'm on a sprint s5 running MOAR 6.0 Lollipop so I don't know if there are or where the kernel may be for you. Kernels are the same as flashing a rom, wipe both caches before and after flashing
---------- Post added at 10:54 AM ---------- Previous post was at 10:53 AM ----------
TheXGX said:
Updated OP. Thanks.
Click to expand...
Click to collapse
No problem at all ?
I am on MOAR Ao6 lollipop. I have the stock music player.which viper won't work with,so I extracted the AOSP music player from the MOAR ROM and changed the apk name from SamsungMusic_20 to SamsungMusic1_20 and created a folder named the same in system/app.set permissions and now I have the stock player. And the AOSP player (Apollo) and viper4android works with Apollo.
UPDATED TO V2
NOTE:-
* Your warranty is now void.
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
* take a nandroid backup before flashing.
Hey folks I've created a HTC Camera & Gallery flashable zip, based on the latest apk files available. I've tested it on my desire 816 running CM_13/14.1, must work on most of the devices. Try and tell me if it works on other devices or not.
Minimum requirements:-
*Android 6.0.1 or later
*Working recovery
Instructions:-
Boot into recovery
Take a nandroid backup
Flash the zip
Wipe cache and dalvik cache
Update V2:-
*File size reduced
*Camera and Gallery apps updated
*Apps consume less ram than before(Zipaligned)
*Should work on other devices also(signature protection removed)
Bugs present:-
*Selfie panorama not working/may work
*Sometimes camera cannot captures enough light
*You tell me with logs
Download:-
V2-[url]https://drive.google.com/open?id=0B8OHC3xBa1AvUkxWd0tqTWRSMU0[/URL]
Don't forget to leave a comment and hit the "THANKS" button........................................
@dhas use this zip
do you able to enable the pro mode
puaka_droid said:
do you able to enable the pro mode
Click to expand...
Click to collapse
No bro the normal shooting modes are available, try it. The camera is quite good
@singhjot0020 this is the camera nd gallery port you were asking for nd search on xda for xtreme music mod
Thanks man, this would help me a lot. :good:
rjcool1999 said:
@singhjot0020 this is the camera nd gallery port you were asking for nd search on xda for xtreme music mod
Click to expand...
Click to collapse
singhjot0020 said:
Thanks man, this would help me a lot. :good:
Click to expand...
Click to collapse
Tell me if u like my work
@Tim Cook
Hi , a question.
Could it also run on android 5.1?
Thanks ivi
ivifly said:
Hi , a question.
Could it also run on android 5.1?
Thanks ivi
Click to expand...
Click to collapse
Mostly no bcz the apk I used requires android 6.0. The lib files are marshmallow compatible files nd they don't go well with lollipop, may cause FC/unstability
Will it work on lineage 14.1 nougat?
shubhamrokzs said:
Will it work on lineage 14.1 nougat?
Click to expand...
Click to collapse
Yup I use it....works smoothly, although I've not updated this package for a long time but I'll update it soon after my xam finishes
can u upload again?
Sent from my Desire+816 using Tapatalk
chorlav said:
can u upload again?
Click to expand...
Click to collapse
No I dnt have time to upload it now........will do it later on. As of now u can install this one, download the latest htc camera.apk from apkmirror and install it normally it will update but the one I use is a bit different nd little modified nd u will get the chance to use it afterwards when I'll update the zip
chorlav said:
can u upload again?
Sent from my Desire+816 using Tapatalk
Click to expand...
Click to collapse
UPDATED
rjcool1999 said:
UPDATED
Click to expand...
Click to collapse
Access denied .Give me access to download bro.
---------- Post added at 07:59 AM ---------- Previous post was at 07:58 AM ----------
rjcool1999 said:
Mostly no bcz the apk I used requires android 6.0. The lib files are marshmallow compatible files nd they don't go well with lollipop, may cause FC/unstability
Click to expand...
Click to collapse
Wat about nougat
rjcool1999 said:
No I dnt have time to upload it now........will do it later on
Click to expand...
Click to collapse
Ohhh sorry I forgot abt the access, nd works on nougat without any issue
rjcool1999 said:
Ohhh sorry I forgot abt the access, nd works on nougat without any issue
Click to expand...
Click to collapse
Why not edit it more and add more features .I like the edited version though.also the snap button is a bit to the left.is it supposed to be that way?And my stock one lineage one started working too I guess there was a problem with some lib files or something.anyways kudos man :good:
shubhamrokzs said:
Why not edit it more and add more features .I like the edited version though.also the snap button is a bit to the left.is it supposed to be that way?And my stock one lineage one started working too I guess there was a problem with some lib files or something.
Click to expand...
Click to collapse
Editing and adding features will require editing a lot of smali files so itz better not to go that way. I just edited android manifest file for better compability no modification to smali files
shubhamrokzs said:
Why not edit it more and add more features .I like the edited version though.also the snap button is a bit to the left.is it supposed to be that way?And my stock one lineage one started working too I guess there was a problem with some lib files or something.anyways kudos man :good:
Click to expand...
Click to collapse
Itz good to hear that the stock camera is also working
Vaibhav:
New version of Google pixel Phone 8.0.147081443 out and working with any rooted nought rom odex or deodex .
Before install please flash Google dialer permission in twrp.then install dialer apk .
Change log bug fixed
http://www.apkmirror.com/apk/google...gle-phone-8-0-147081443-android-apk-download/
New dark blue colour version big photo. Isntall as normal apk. Work on rooted & non rooted phone
V8 in GREEN COLOUR .
http://www.apkmirror.com/apk/google...gle-phone-9-0-153787429-android-apk-download/
saxena1 said:
Vaibhav:
New version of Google pixel Phone 8.0.147081443 out and working with any rooted nought rom odex or deodex .
Before install please flash Google dialer permission in twrp.then install dialer apk .
Change log bug fixed
http://www.apkmirror.com/apk/google...gle-phone-8-0-147081443-android-apk-download/
Click to expand...
Click to collapse
Could you please add support for marshmallow
saxena1 said:
Vaibhav:
New version of Google pixel Phone 8.0.147081443 out and working with any rooted nought rom odex or deodex .
Before install please flash Google dialer permission in twrp.then install dialer apk .
Change log bug fixed
http://www.apkmirror.com/apk/google...gle-phone-8-0-147081443-android-apk-download/
Click to expand...
Click to collapse
Why does root be needed, when all that we do is flashing in twrp and normal installation ?
Am I missing something
dollardollar said:
Why does root be needed, when all that we do is flashing in deep and normal installation ?
Am I missing something
Click to expand...
Click to collapse
Because without root you can't flash Google dialer permission. this permission allows to install apk.
toole said:
Could you please add support for marshmallow
Click to expand...
Click to collapse
This akp is for marshmallow
saxena1 said:
This akp is for marshmallow
Click to expand...
Click to collapse
But its not v 8. I already have V 5 running on my marshmallow.
jayantraj said:
But its not v 8. I already have V 5 running on my marshmallow.
Click to expand...
Click to collapse
V8 is for nougat 7.
saxena1 said:
V8 is for nougat 7.
Click to expand...
Click to collapse
No. Its for marshmallow too.. check apkmirror
Apk not compatible
Where can I find Google Phone version 8.0.147081443? I cannot install this application on apk mirror. Is there any way to modify apk, and install on all non-nexus devices?
Tayler1917 said:
Where can I find Google Phone version 8.0.147081443? I cannot install this application on apk mirror. Is there any way to modify apk, and install on all non-nexus devices?
Click to expand...
Click to collapse
Read 0p
This was the only install on xda that worked on my SM-G930F (latest v7 stock firmware). Thank you!
Awesome!!!!:good::good:
Thanks
Google Phone 8.0.148481159 New Version When You Going To Patch
jack_ssl said:
Google Phone 8.0.148481159 New Version When You Going To Patch
Click to expand...
Click to collapse
No need to patch you can install directly original apk(if you already flashed permission zip)
Added New dark blue colour version big photo in op.
But this one dont appear any miss call from the system right?
I used your apk and it is the 5.0 version not the 8.0 version....can we use the 8.0 version and still have the big caller ID. if so how can we do this.
---------- Post added at 03:52 AM ---------- Previous post was at 03:36 AM ----------
saxena1 said:
No need to patch you can install directly original apk(if you already flashed permission zip)
Click to expand...
Click to collapse
will we still have the big picture for caller ID
comptonhubbard said:
I used your apk and it is the 5.0 version not the 8.0 version....can we use the 8.0 version and still have the big caller ID. if so how can we do this.
---------- Post added at 03:52 AM ---------- Previous post was at 03:36 AM ----------
will we still have the big picture for caller ID
Click to expand...
Click to collapse
V8 green colour added op.
thx a lot bro works fine in AOSP 7.1.1 rom
Thanks a ton bro.. the default dialer was too slow.. was looking for this since quite long..
this is the only one working on non-rooted phone S7 edge android 7