I installed this latest jellybean leak for my Verizon GS3.
Pairing is not a problem nor is auto connect. My problem is the audio is completely garbled and inaudible during voice phone calls from my car.
I have an Infinity G37.
I did not have any problems before I flashed this leak Prior to this, I had flashed CyanogenMod 10 unofficial nightly builds with no problems. Prior to this, I had also used the latest verizon release for ICS with no problems.
The phone (as currently flashed to the jellybean leak VRBLK1) pairs and works perfectly with my wife's BMW Z4.
I have reset, unpaired, cleared the cache, etc and I just cant get this to work. I have tried different radios with no luck. I have downloaded and tried different bluetooth fixes from the marketplace with no luck.
My only option is either flashing back to ICS, or CyanogenMod 10 unofficial, but I prefer not to do that because other than this problem, everything else is perfect.
I have searched the forums and am unable to get an older version of Bluetooth Share (Would like to replace 4.1.1 with 4.0.4) which i suspect may fix this problem.
Any suggestions will be greatly appreciated. I do a lot of calls in my vehicle and we have a hands free ordinance in our city.
Nothing?
Anyone? Anyone? Anyone?
You've got it: 4.1.1 issue. No idea on a fix, I'm back to ICS as a result. Isn't a modem issue it seems (unless interaction between JB builds and particular modems), seems to be a JB issue (reported across phones with lots of different vehicles).
Hi All,
On a Telstra XT925 I have been on SlimRom 4.3 for some while now and for last 2 months or so I have been routinely backing this up with CWM and trying the various new 4.4.x builds but have *always* found the Location settings did not work at all. I also went as far as trying all manner of other apps to either help the GPS get a lock but in all cases it refused to recognize that there was a GPS at all or was not turned on, and this would not have been too bad if the WiFi location based side was working as a stop gap, but this also stubbornly refused to work so I kept reverting back to 4.3.
I'm not sure if this is just me, but this was the case for DHacker, CM11, SlimKat 4.4.2 + 4.4.3, RomFactory, that is until I tried Carbon Rom KK Nightly from 20-June-2014 from the moto_msm 8960 Build:
https://carbonrom.org/downloads/?device=moto_msm8960&type=nightly
This is 4.4.4 and I'm happy that I did persevere because the GPS *IS* working on this. The Wifi location sensing is still not working which is something of a shame, but now I no longer consider this a deal breaker and can live with it. If anyone has any suggestions on how to troubleshoot or fix the Wifi Location issues I'm open to suggestions.
Cheers,
DaveC
and the reason you did not post this in the Carbon-Thread is....?
http://forum.xda-developers.com/showthread.php?t=2635769
can a mod please move this.
Hi all,
Would like to know if there is a 4.4.4 custom Rom that is still being updated.
Something that I can install on top of the new radio/boatloader
Thanks
Why?
Sent from my Nexus 5 using Tapatalk
Because Lollipoop is horrible. Each ROM that I try, the battery cannot last the day, My audio book player doesn't work properly, the lockscreen is overbusy which renders it hopeless for shortcuts. The notifications are useless for quick reading from the lockscreen. The pattern lock is now 2 steps away from showing up, instead of just being there.
This is with TWRP 2.8.6.1, the latest bootloader and baseband.
The slimkat that I ran with no issues for a year, was getting me nearly 48 hours of battery life, but has lately giving me the inability to connect to ssl connections over my carrier network. I have to wait until I get to a wifi zone for it the ssl to work. Which renders my several owncloud servers to be unreachable until I get to wifi network. As well several websites that use ssl unreachable too.
I just did a latest liquidsmooth android 4.4.4 fresh install and still the issue persists.
Heeter
So a couple of months ago this started happening. I was running 5.0.1 and now I´m on 5.1 and it is the same.
Wifi is set to "always on". If the phone is blocked for a short time wifi works fine but if I don´t keep unblocking the screen it just turns off. It turns on automatically when I unlock the phone. This happens in any wifi network.
I know it´s more energy efficient this way but this is really anoying when having a phonecall over the internet, when using spotify or just when receiving whatsapp messages.
I did not wait for the OTA updates. I rooted my Moto G XT1032 to update from kitkat using the brazilian rom. I also used the GPE method to update to 5.1
Did I do something wrong? Is this a known lollipop issue? Any pointers? So far I´ve only found a couple of solutions involving installing a 3rd party app.
Thanks!
Try to flash a new ROM,wifi set and installing a third party app are two usual ways causing this problem ,if you are sure you have set right ,I think it is a ROM problem. Sorry for my English.
Homtom HT10
a new official firmware has been released:
HOMTOM-HT10-Android6.0-V01-20170226.zip
http://www.homtom.cc/
https://drive.google.com/file/d/0By2t6rTTiNQNcEJ1QkpKQnhzck0/view?usp=sharing
no change log unfortunately
could you please report if those major bugs listed bellow are finally fixed?
is it rootable? if yes, how?
- no OTA update
- losing user language preference (simcard default language is used instead)
- losing connectivity (cannot make/receive calls)
- iris / pattern unlock crash/reboot
- random reboot
- screen calibration issue (not responding sometimes and it cannot be fixed with calibration apps from Google store)
- blurry pictures (slow focus and shutter speed)
- bad audio quality (over saturated)
- clean of malwares and chinese apps
Hardware features that were announced but never won't be available (fake advertising / SCAM):
- 5Ghz Wi-Fi compatibily
- NFC
- OTG
*** UPDATE ***
Ok folks... I removed the simcard and also the battery few seconds and flashed latest firmware with sp_flash_tool (firmware mode not download mode) and lost everything (all apps / data) but there is a good news... smartphone doesn't lose language preference anymore!
unfortunately smartphone is still losing connectivity and network (cannot make/receive calls even if there is network signal !)
(I thought it was solved too because it has worked almost half a day but actually i've still got this issue!)
so HomTom HT10 is still a useless 'smart' brick...
And HomTom is doing the same than UMI: banning from their Facebook page users reporting bugs or false avertising (OTG/NFC/Wi-Fi 5Ghz/full bands support/...).
Got mine 2 weeks ago and have not experinced any of the problem above. I think you have got a bad phone only(fake copy?).
I had a update as soon as I started the phone and it is now HOMTOM-HT10-Android6.0-V01-20170225, hmm yours is 0226.
I am no super user of phones but this one is working very good only the sound when doing the iris thing is annoying.
Tradexer said:
Got mine 2 weeks ago and have not experinced any of the problem above. I think you have got a bad phone only(fake copy?).
I had a update as soon as I started the phone and it is now HOMTOM-HT10-Android6.0-V01-20170225, hmm yours is 0226.
I am no super user of phones but this one is working very good only the sound when doing the iris thing is annoying.
Click to expand...
Click to collapse
Mine is the same it's just their typo error. When extracted it's 20170225
Anyway there is a new official firmware... Anyone tried it already?
@ homtom.cc
HOMTOM-HT10-Android6.0-V01-20170510.zip
I'm looking for an English (or global) custom ROM for this device running Android 6.x or 7.x
MoKee, GizROM, LineageOS 13/14/15. Any ROM 100% working.
I bought one of these a while back and using it on the T-Mobile network for over 8 months. I also have not had any trouble that you stated above such as loosing connectivity or the iris scan crashing. I do agree that it would be nice if you could turn off the iris scan noise though. Love this phone and glad I took a chance when ordering it.
I may have found this thread a little late, but here I am. I have the Homtom HT10 running the firmware Android-6.0-V01-20161202 and I was able to root the device using Kingo Root. It's been a while, but I think there were some additional steps to go through before this root worked. My question is if anyone here has had success in rooting one of the newer firmwares, since I'm not sure if this root would survive the firmware update and I wouldn't want to lose root access.
Also, does anyone know how to replace the Kingo Superuser app with Chainfire's version?
mine was working good, i rooted , and install magisk and after a while i loose connectivity when make calls..i flash full firmware..format and all the stuff and still cannot make callss
leo_hacker82 said:
mine was working good, i rooted , and install magisk and after a while i loose connectivity when make calls..i flash full firmware..format and all the stuff and still cannot make callss
Click to expand...
Click to collapse
I've flashed HOMTOM-HT10-Android6.0-V01-20170622 and so far all works pretty good (it keeps the language)...
Only audio EQ quality is poor (distorsion) and volume / quality issue in phone calls.
Not sure yet if OS is able to switch properly from a deficient 4G network to 3G/2G (because i'm currently using forced 3G mode in settings) but it seems to work better than previously.
flashing the Rom
Hi guys. I'm having trouble loading the latest firmware thru sp flash tool.
I'm running Windows 10 and I've installed the extra drivers.
Would love some help.
Thanks
Did you have to push any button combinations to get SPflashtool to start?
chevycowboyusa said:
Did you have to push any button combinations to get SPflashtool to start?
Click to expand...
Click to collapse
maybe u need to press volume up or down..or both i dont remember dont have any more...but that should work...or maybe press power and both volume buttons...
leo_hacker82 said:
maybe u need to press volume up or down..or both i dont remember dont have any more...but that should work...or maybe press power and both volume buttons...
Click to expand...
Click to collapse
I used a different version of flash tool and it started when I put the battery in. There's so many versions of flash tool I guess. But I got it working.
Thanks for the response!
Chevy
My HT10 (got it a month ago) GPS not working
Hi guys
My HT10 GPS in to working. The phone is new, I just got it, and it literally only has viber and Here maps on.
The GPS tested today, not working.
Under a sky with no clouds in the middle of a field with no obstructing buildings and no signal whatsoever.
custom build version: alps-mp-m0.mp9-v1.33_aeon6797.6c.m_p11
Hello
I am french and I live in Ireland.
I have same problem with my Homtom HT10. My smartphone is still losing connectivity and network (cannot make/receive calls even if there is network signal !). I indicated the problem to Homtom who asked me to update Firmware but it did not improve the problem. Homtom suggests me sending back the smartphone for repair but postal charges are very expensive for China.
No solution... I have to restart my Homtom all days if I want to send a SMS or make a phone call.
Perhaps a problem with the SIM Card ?
I got mine since 4 months ago.
Probably the worst android I ever got.
It is fast ok and charge is really quick but its always losing connection. Its more like a photo camera and mp3 than phone.
The other stupid thing is that can connect Wifi 5Ghz and the 2.4 is really slow.
I have already stock firmarware 20170622
Serious Homtom ??
Hi
My question to Homtom :
When Androïd 7.0 Nougat is going to arrive for my Homtom HT10 ?
Homtom's answer :
Dear customer,
Hello.
Unfortunately, we don't have any available news about update to Android 7.0 on HT10 at present. Please note that the original Android platform could not be upgraded in normal situation.
Best regards!
Email: [email protected]
It's not a joke... An incompetent technical department