Database Info

[Q] Help MTK6573(Understanding SP FLASH TOOL error)

I have got a chinese clone phone with MTK6573V which was bricked by flashing a wrong firmware image via CWM-based custom recovery BUT after flashing the wrong firmware my phone cant even boot not even in recovery mode.Nor i am able to write Recovery via SP Flash Tool v2.1134.00 it always give me error :
BROM ERROR:S_DL_GET_DRAM_SETTING_FAIL(5054)
[EMI]obtain DRAM Failed!
[HINT]lease check your load matches to your target which is to be download.
http://img838.imageshack.us/img838/3817/mtkerror.jpg
My phone is only able to make MTK PRELOADER PORT nothing else, no back light, no recovery mode
And now my phone also dont make MT65x3 USB VCOM Port so i am only able to connect phone with SP TOOLS when DA DOWNLOAD ALL is enabled otherwise it wont connect

mtk6573
hello there
i read your post and you has exacly the same problem im having with my phone.
did you manage to solve the problem?
if you did can you please help me out.
Thx

I have the same problem.
It`s bricked, nothing works and i cannot even upload the preloader or anything
EDIT : Upgraded to latest SP Flash tool and now i get a new error 5007

I have the same problem in MTK6575. Any solution?
B.R.

check the following link may be that will be helpful for you guys
http://www.labandroid.com/china/2013/02/flash-cwm-recovery-to-mtk-phones-without-sp-flash-tool/

[Completed] Lenovo A369i Stuck After ChainFire

Hello, I have a problem with my Lenovo A369i. I rooted my device and tried to install ChainFire and plugged the battery out and inserted in. It had stuck on bootloop so then I tried to flash stock rom to it via SP Flashtool but the "Download" button didn't work and said "Error 4032:Enable DRAM failed........." so I clicked on "Firmware Upgrade" button and phone worked (Build number ROW_S111_140522) but it doesn't detect SIM card (IMEI codes are invalid and I could't fix it from engineering mode "AT Command Send" didn't work) and camera doesn't work also (not so important for me though) how can I fix it guys ? When I try that thread "http://forum.xda-developers.com/showthread.php?t=2560607" SP Flash tool says "pmt changed for the rom it must be downloaded". Please help me I have no important data in my phone I wiped the data and cache partition also but nothing worked :crying:
(Baseband version : A369i.V2,2013/08/14 14:37)
(Android version : 4.2.2)
(IMEI codes both invalid, no system upgrade required it says also)
Help me asap please...

Grains said:
Hello, I have a problem with my Lenovo A369i. I rooted my device and tried to install ChainFire and plugged the battery out and inserted in. It had stuck on bootloop so then I tried to flash stock rom to it via SP Flashtool but the "Download" button didn't work and said "Error 4032:Enable DRAM failed........." so I clicked on "Firmware Upgrade" button and phone worked (Build number ROW_S111_140522) but it doesn't detect SIM card (IMEI codes are invalid and I could't fix it from engineering mode "AT Command Send" didn't work) and camera doesn't work also (not so important for me though) how can I fix it guys ? When I try that thread "http://forum.xda-developers.com/showthread.php?t=2560607" SP Flash tool says "pmt changed for the rom it must be downloaded". Please help me I have no important data in my phone I wiped the data and cache partition also but nothing worked :crying:
(Baseband version : A369i.V2,2013/08/14 14:37)
(Android version : 4.2.2)
(IMEI codes both invalid, no system upgrade required it says also)
Help me asap please...
Click to expand...
Click to collapse
Hello,
You may try flashing stock firmware for your device here
-Vatsal

[Completed] BROM ERROR : S_FT_ENABLE_DRAM_FAIL (0xFC0) SP Flash Tool mtk6572

Hi there guys @ xda.
I need help with my mtk6572 phone which i bricked in a noob way.
I need help flashing it with SP Flash Tool which gives an error as described in title.
Here is how i bricked it.
Today i decided that i want to flash a custom recovery on my phone, so i did and it worked.
I experienced a bug on the recovery and decided i wanted to put the stoc recovery back.
I flashed it back and the recovery booted fine, wiped chache and did factory reset.
After i did that my phone got stuck on boot animation.
I then decided that it was a good idea to flash to complete stock rom back to my phone,
but chose the forma all + download option, so that the changes the custom recovery made
were deleted. Well, so i thought...
Right after the format i got an error that said that my firmware is not for my phone and failed.
Now if i try to format or download the stock rom (which i backed up from my device before flashing)
i get the error code in the title.
I tried uninstalling all the mtk drivers from my pc. When i connect my device it is picked up in device manager
as "unknown device", i then updated the drivers with mediatek preloader driver (and tried all the mtk drivers out there)
but the flash tool still gives the same error.
After i press the download button, and connect my phone, the bar at the bottom goes to 100%(red colour) then stays like that for 41 seconds.
Then it gives the error code and fails to flash.
I tried everything, from removing the battery, pressing vol+, vol-, power and all the combos in between, nothing.
If someone could help me unbrick my phone, i would be very greatfull.
P.S I have the stock rom backed up from my device and prepared with mtk droid tools for flash tool.

Hi,
Thanks for using XDA assist.
Please read this guide if you haven't already:
[TUT]MTK Android (Sp flash tool ) tutorial
If the guide doesn't help, please create a XDA account and ask your question in the link directly above as well.
Good Luck! - gsstudios

I Bricked my XOLO Q900T...!!

Hello,
XDA Developers team I am completely bricked my XOLO Q900T phone , it is completely dead. Is it possible to unbrick this device ?
Please provide me proper procedure to unbrick this device . If possible please provide the stock ROM for this device. I downloaded three stock ROMs for this phone from different websites. I am using sp flash tool to flash this device but, nothing positive happened. It always shows BROM ERROR: S_DL_PMT_ERR_NO_SPACE(5069)...!! I am able to full format this using sp flash tool , I can download the preloader successfully. But, I can't download the stock ROM . Even I am tried MtkDroidTools to create scatter file as well as all blocks but in every rom it shows an error that firmware.info file is missing. Without firmware.info I can't create the scatter file and without files.md5 I can't create blocks. I don't have a backup for this device. Please provide me solution for this device as soon as possible.

help with oukitel wp6 (MTK) hard bricked trying to flash with sp flash tool

Hello and first of all i'm not sure if this is the correct place to post my question if not sorry i am new here.
well i have a oukitel wp6 phone that all of a sudden went into factory mode loop tried reeboting, wipe and restore factory settings many times and nothng so decided to flash with sp tool fist tried with tool from original oukitel page with costum rom diidn't work, so tried with sp tool and MTK tool had problems with verification tried 3 diffrent rom including custom rom from original oukitel page, same problem so tried bypassing with libusb and bypass utility master and exploits original MTK USB VCOM drivers all seemed to go well but when tried to flash with sp flash tool i must have done something very wrong now my phone is dead no light no boot the sp flash tool doesn't even reconize the phone when i try to flash the boot loader. anyway my question is is this it or is there still a posibility to recover my phone?
any help will be very apreciated.
thank you,
angel

nobody? any ideas?