Hello I tried installing a rom for my gt-n8010 tablet with odin v3.09 but I was idiot enought to install a version that was designed for the gt-n8000 . As a result the tablet is now stuck at " downloading screen "of odin. I tried pushing power button + volume button but after restart the screen remains the same. Also when I try to install the correct version from Odin the procedure stops at "setupConnection" and then a message is shown saying that com port connection cannot be established. I installed-uninstallled kies and drivers as suggested to other posts but it doesn't work either. I am on the verge of panic attack! Is there anything I can do to save my tablet?
Thx in advance
Related
I don't know what else to try! I have gone into Odin and tried flashing the stock ROM and different recoveries with no luck. No matter what buttons that I push, it keeps coming back to the bootloader screen! :crying:
Install kies first and then reboot pc for drivers
Use odin version 1.85
Download firmware from www.samfirmware.com for your device model number as 3113 (see your model number)
Close kies when using odin
Put tar or tar.md5 in pda of odin and connect tab with original cable
See if a yellow ribbon appear in odin and a port number
Try hitting start
Wait till green ribbon and pass
Try also power + volume up
Sent from Galaxy S2 or Galaxy Tab2
Have you tried just holding the power button for like 10 seconds to get it to reboot?
This worked for me:
Press and hold: Power+home+vol-down
So i tried to root the device - i followed the steps from here:
http://forum.xda-developers.com/showthread.php?p=53035539
then i downloaded the Kitkat firmware and followed the steps here:
http://forum.xda-developers.com/showthread.php?t=2767314
After pressed start on Odin v3.09 with the Kitkat firmware (N8000XXUDNE4_N8000OXADNE4_N8000XXUDNE1.tar.md5) i waited for a few minutes until completed.
my tablet has now says ' Downloading...Do not turn off target!!.
I have no idea what to do next. I tried rebooting it using the power button but it keeps going back to the same screen.
i have to do this whilst Odin is running on my PC and also when i unplugged the USB cable from the tablet.
I tried the download mode (hold power button + volume down) but it keeps saying the same screen only with the upper left texts saying 'Odin Mode'
I'm completely stuck. Help, anyone?
rtablada said:
So i tried to root the device - i followed the steps from here:
http://forum.xda-developers.com/showthread.php?p=53035539
then i downloaded the Kitkat firmware and followed the steps here:
http://forum.xda-developers.com/showthread.php?t=2767314
After pressed start on Odin v3.09 with the Kitkat firmware (N8000XXUDNE4_N8000OXADNE4_N8000XXUDNE1.tar.md5) i waited for a few minutes until completed.
my tablet has now says ' Downloading...Do not turn off target!!.
I have no idea what to do next. I tried rebooting it using the power button but it keeps going back to the same screen.
i have to do this whilst Odin is running on my PC and also when i unplugged the USB cable from the tablet.
I tried the download mode (hold power button + volume down) but it keeps saying the same screen only with the upper left texts saying 'Odin Mode'
I'm completely stuck. Help, anyone?
Click to expand...
Click to collapse
the same happen to me. any help???
I think that screen is download mode. Try using odin 3.07 and flash the firmware again.
Sent from my GT-N8000 using xda premium
I had the same when I first tried to install it. I went back to odin 1.85 and everything went perfect
Same here. Flashed successfully with Odin 3.07
Hello,
same problem here. With no success. Please help!
I flashed succesfully with Odin 1.85.
Hi there. I need help for my device. After I rooted my Samsung galaxy core I8262 i'v planned on installing the CWM Recovery. But before that, I tried to back up my device using the TITANIUM Backup. While the backup procedure is on the process my phone shuts down (because the battery is low i guess). After then, when i turned on my phone, the boot process stops only at the SAMSUNG logo. But after a couple of restarts (maybe 10 i guess) my phones passes the boot process of the SAMSUNG logo. Now while i'm using my device I've found out some other malfunctions like:
1) I can't detect and bluetooth devices even other devices tried to detect me but its undescoverable.
2) I can connect to a hotspot device, but i cant access the Internet even if it has a connection.
So far those where the problems that i had encountered yet after the backup problem occurs. What should I do in this kind problem? Should i upgrade my firmware?
Thanks
Flash your rom stock with odin
pepmat said:
Flash your rom stock with odin
Click to expand...
Click to collapse
How will i do that? Thanks?
I already have an Odin v1.85 but I dont really know how to do it?
Im new in this ^_^
Download the stock firmware from the site SamMobile, then turn off your phone and press Power + Volume ↓ + Home and vibrates when the phone leaves the power and press volume ↑. Then connect your phone to the PC, open odin, click pda and select the file . md5 of the stock rom you downloaded and click start.
pepmat said:
Download the stock firmware from the site SamMobile, then turn off your phone and press Power + Volume ↓ + Home and vibrates when the phone leaves the power and press volume ↑. Then connect your phone to the PC, open odin, click pda and select the file . md5 of the stock rom you downloaded and click start.
Click to expand...
Click to collapse
What does the procedure do? What was gonna happen if i do it?
I just wanna have knowledge on how its done ^_^. Before I'll try this one. Thanks man!
Galaxy tab 7 sph-p100 stuck in a boot loop after root attempt, using odin3 v1.70 and CF-Root-TAB7_XX_OXA_JQ1-v3.3-CWM3RFS.tar and this tutorial off youtube "How to ROOT Galaxy TAB P1000 [Gingerbread]" ,Im not a developer , I wanted to gain root access to upgrade to jelly bean 4.4. I downloaded drivers for the tablet onto my pc based machine, downloaded the linked files, ran odin, selected PDA, selected the CF-Root-Tab7.tar, I want to note that In the tutorial the tabs stock version was 2.3.6 while mine WAS 2.3.4. With my tablet off I connected my usb cable, odin detected my device, with my device connected , odin displayed it as com-4 while in the tutorial the device connected read com-3, I hit start on odin, Odin's messages displayed 1 succeed/ 0 failure, my tab reboots and reads samsung then displays a faint white line on the right side of the screen and just keeps doing that. I hold power till it goes completely off , the I try holding power + Vol up keys when the samsung logo is displayed let off the vol and keep holding the power key till it goes Into recovery mode? which it wont...... I don't really know how to proceed at this point , Im pretty much stuck with this device until its figured out. Any help is much appreciated.
Wrong Tab sir.
Hello XDA !
I have a Tab 2 P3100, bricked with Odin. I was using a flash file that I've used many times before on the same laptop, with the same cable, and the same tablet.
Something went wrong and Odin displayed an error saying there's no PIT partition .
I've tried to use different PCs and cables, still not working.
I'm stuck now at the emergency recovery page, and when connected to Kies it just hangs on "Connecting...". The device does charge alright but I cannot turn it off (it reboots instead of shutting down when I long press the power button).
I think it might be going into download mode when I hold power button + vol down, but I'm not sure as it gives me a blank black screen and gets a bit hot on the left upper corner.
Any Ideas ?
Thanks in advance!
UPDATE: I managed to find "loose" solder points on the USB port and replaced the whole port altogether, What I'm facing now is that after I flash the device with official stock ROM, Odin3 seems to finish the work and flash the whole ROM to the device, but when I try to reboot the device it's still stuck on emergency recovery screen.