Galaxy Tab 7 sph-p100 boot looped after root attempt - Galaxy Tab 7.7 Q&A, Help & Troubleshooting

Galaxy tab 7 sph-p100 stuck in a boot loop after root attempt, using odin3 v1.70 and CF-Root-TAB7_XX_OXA_JQ1-v3.3-CWM3RFS.tar and this tutorial off youtube "How to ROOT Galaxy TAB P1000 [Gingerbread]" ,Im not a developer , I wanted to gain root access to upgrade to jelly bean 4.4. I downloaded drivers for the tablet onto my pc based machine, downloaded the linked files, ran odin, selected PDA, selected the CF-Root-Tab7.tar, I want to note that In the tutorial the tabs stock version was 2.3.6 while mine WAS 2.3.4. With my tablet off I connected my usb cable, odin detected my device, with my device connected , odin displayed it as com-4 while in the tutorial the device connected read com-3, I hit start on odin, Odin's messages displayed 1 succeed/ 0 failure, my tab reboots and reads samsung then displays a faint white line on the right side of the screen and just keeps doing that. I hold power till it goes completely off , the I try holding power + Vol up keys when the samsung logo is displayed let off the vol and keep holding the power key till it goes Into recovery mode? which it wont...... I don't really know how to proceed at this point , Im pretty much stuck with this device until its figured out. Any help is much appreciated.

Wrong Tab sir.

Related

[Q] Stuck in Download mode!

I don't know what else to try! I have gone into Odin and tried flashing the stock ROM and different recoveries with no luck. No matter what buttons that I push, it keeps coming back to the bootloader screen! :crying:
Install kies first and then reboot pc for drivers
Use odin version 1.85
Download firmware from www.samfirmware.com for your device model number as 3113 (see your model number)
Close kies when using odin
Put tar or tar.md5 in pda of odin and connect tab with original cable
See if a yellow ribbon appear in odin and a port number
Try hitting start
Wait till green ribbon and pass
Try also power + volume up
Sent from Galaxy S2 or Galaxy Tab2
Have you tried just holding the power button for like 10 seconds to get it to reboot?
This worked for me:
Press and hold: Power+home+vol-down

[Q] Tablet wont turn on after root attempt with Odin

Hi I am new to this forum and I tried to post this question before but I don't think it was posted so I will try again here:
So after that kitkat update my galaxy note 2014 P605 tablet couldn't download to my external SD-card so I attempted to root my tablet by following the instructions on "root samsung galaxy note 10.1 sm p605" by androidxda (I am new so I cannot post links but simply google it you wont miss it)
However as I reached "step 10" in the instructions I noticed that although I could see the green "PASS!" sign on Odin, my tablet wasn't rebooting but simply flashing/turning on as it did during the whole process.
Because the instructions said that I could disconnect the USB from the PC once I saw the green sign, I took the USB cable off the PC but my tablet kept flashing/turning on as it did during the whole process.
I pushed down the power button but it didn't turn off so I pushed down the volume button as well as the power button for 5-8 seconds and it turned off.
But it won't turn on again no matter what, I have tried to charge it , connect it to the PC etc. but nothing works
Can someone please help me out with this? Do I need to take off the battery and put it back in?
HelplessMoeJoe said:
Hi I am new to this forum and I tried to post this question before but I don't think it was posted so I will try again here:
So after that kitkat update my galaxy note 2014 P605 tablet couldn't download to my external SD-card so I attempted to root my tablet by following the instructions on "root samsung galaxy note 10.1 sm p605" by androidxda (I am new so I cannot post links but simply google it you wont miss it)
However as I reached "step 10" in the instructions I noticed that although I could see the green "PASS!" sign on Odin, my tablet wasn't rebooting but simply flashing/turning on as it did during the whole process.
Because the instructions said that I could disconnect the USB from the PC once I saw the green sign, I took the USB cable off the PC but my tablet kept flashing/turning on as it did during the whole process.
I pushed down the power button but it didn't turn off so I pushed down the volume button as well as the power button for 5-8 seconds and it turned off.
But it won't turn on again no matter what, I have tried to charge it , connect it to the PC etc. but nothing works
Can someone please help me out with this? Do I need to take off the battery and put it back in?
Click to expand...
Click to collapse
I read the instructions and those are good. So I'm guessing the problem is somewhere else. First of all, you mention the tablet: "flashing/turning on" during the process. This is not normal during flashing with Odin. You should only see a blue bar loading on the screen of the device. Also, at the end, along with the green PASS you should see in the log something like: 1 succeeded / 0 failed. It's also in the printscreen of the tutorial you followed. The tablet should reboot only if you check Auto Reboot in Odin.
It sounds a bit like you bricked your device. You can try removing and reinserting the battery. Try turning it on. If nothing nothing happens (device vibrates, screen turns on but stays black, anything) no matter the combination of keys you press, then you probably hard bricked your device and need a JTAG. In other words, you need to take it to a service to have its software rewritten on the board.
There's also a device called a USB Jig (search on google for it). It's a tiny microusb that when plugged in the device, boots it into Download mode and you can reflash the original firmware. But I doubt it would work in your case.
Good luck.
HelplessMoeJoe said:
Hi I am new to this forum and I tried to post this question before but I don't think it was posted so I will try again here:
So after that kitkat update my galaxy note 2014 P605 tablet couldn't download to my external SD-card so I attempted to root my tablet by following the instructions on "root samsung galaxy note 10.1 sm p605" by androidxda (I am new so I cannot post links but simply google it you wont miss it)
However as I reached "step 10" in the instructions I noticed that although I could see the green "PASS!" sign on Odin, my tablet wasn't rebooting but simply flashing/turning on as it did during the whole process.
Because the instructions said that I could disconnect the USB from the PC once I saw the green sign, I took the USB cable off the PC but my tablet kept flashing/turning on as it did during the whole process.
I pushed down the power button but it didn't turn off so I pushed down the volume button as well as the power button for 5-8 seconds and it turned off.
But it won't turn on again no matter what, I have tried to charge it , connect it to the PC etc. but nothing works
Can someone please help me out with this? Do I need to take off the battery and put it back in?
Click to expand...
Click to collapse
Will it show battery charging animation if you connect your tablet to a PC or a charger?

[q] please help my android device is stuck on boot loop

Hey guys so umm I have a Samsung galaxy discover SGH-S730M and I flashed a wrong rom on it with CMW and when i rebooted it it just vibrates and shows the Samsung logo then turns of and does the same thing over and over again I tried connecting it to my computer but unfortunately it doesn't recognize anything like the computer doesn't recognize and neither does the phone react in any way... I also tried going into recovery mode to flash the stock rom but no luck it doesn't get any further than the Samsung logo and it just turns off I tried going into download mode to flash a rom with odin but that doesn't work either it just does the same thing.
PLEASE HELP ME I HAVE ALL MY IMPORTANT THINGS ON THIS DEVICE... ANY HELP WOULD BE HIGHLY APPRECIATED
Device Info:
Samsung Galaxy Discover SGH-730M.
Running on Android 4.0.4.
Rooted.
M.Ruben said:
Hey guys so umm I have a Samsung galaxy discover SGH-S730M and I flashed a wrong rom on it with CMW and when i rebooted it it just vibrates and shows the Samsung logo then turns of and does the same thing over and over again I tried connecting it to my computer but unfortunately it doesn't recognize anything like the computer doesn't recognize and neither does the phone react in any way... I also tried going into recovery mode to flash the stock rom but no luck it doesn't get any further than the Samsung logo and it just turns off I tried going into download mode to flash a rom with odin but that doesn't work either it just does the same thing.
PLEASE HELP ME I HAVE ALL MY IMPORTANT THINGS ON THIS DEVICE... ANY HELP WOULD BE HIGHLY APPRECIATED
Device Info:
Samsung Galaxy Discover SGH-730M.
Running on Android 4.0.4.
Rooted.
Click to expand...
Click to collapse
Download odin and stock rom files to flash with odin (make sure you use correct files or a brick will happen)
Shutdown the phone (if needed hold power button 10+ seconds until bootloop stops).
Plug phone into computer and turn the phone on and as the phone vibrates release the power button, then hold down the volume down button and home key. then follow onscreen instructions.
for flashing instructions please search the mobile section of these forums.
I followed all the intrusions given and the only thing that as changed is the cwm. its still stuck on the Samsung screen and not moving.

Bricked Galaxy Tab 2 P3100

Hello XDA !
I have a Tab 2 P3100, bricked with Odin. I was using a flash file that I've used many times before on the same laptop, with the same cable, and the same tablet.
Something went wrong and Odin displayed an error saying there's no PIT partition .
I've tried to use different PCs and cables, still not working.
I'm stuck now at the emergency recovery page, and when connected to Kies it just hangs on "Connecting...". The device does charge alright but I cannot turn it off (it reboots instead of shutting down when I long press the power button).
I think it might be going into download mode when I hold power button + vol down, but I'm not sure as it gives me a blank black screen and gets a bit hot on the left upper corner.
Any Ideas ?
Thanks in advance!
UPDATE: I managed to find "loose" solder points on the USB port and replaced the whole port altogether, What I'm facing now is that after I flash the device with official stock ROM, Odin3 seems to finish the work and flash the whole ROM to the device, but when I try to reboot the device it's still stuck on emergency recovery screen.

Galaxy S duos 7582 boot loop and unable to access recovery mode. help guys please

Hi Guys,
I have the Samsung galaxy S duos (7582) and I believe that my phone has soft bricked.
1. At first the phone will switch on only while connected to charger. Even if its switched on it will just show the start page with Samsung logo and phone model only.
2. I have replaced the battery and tried but it shows the same result. Doesn’t charged up but can switch on the phone (only to start screen with Samsung logo and phone model) with connecting to charger e or PC.
3. The mobile phone is not detected by the PC, but the same has detected by odin. I have passed in odin but unable to access the recovery mode by pressing volume up+home+power buttons. ( i can access downloading mode)
4. Finally I tried to flash stock rom with Odin and it shows Fail.
Appreciate your help.
:crying::crying::crying::crying::crying::crying::crying::crying::crying::crying:
i have tried to flash the stock rom with odin
[email protected] said:
Hi Guys,
I have the Samsung galaxy S duos (7582) and I believe that my phone has soft bricked.
1. At first the phone will switch on only while connected to charger. Even if its switched on it will just show the start page with Samsung logo and phone model only.
2. I have replaced the battery and tried but it shows the same result. Doesn’t charged up but can switch on the phone (only to start screen with Samsung logo and phone model) with connecting to charger e or PC.
3. The mobile phone is not detected by the PC, but the same has detected by odin. I have passed in odin but unable to access the recovery mode by pressing volume up+home+power buttons. ( i can access downloading mode)
4. Finally I tried to flash stock rom with Odin and it shows Fail.
Appreciate your help.
:crying::crying::crying::crying::crying::crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
i have tried to falsh the stock frimware with odin.
downloaded the pack from sammobile.com/firmwares/confirm/36920/S7582DDUANJ1_S7582ODDANJ1_INS/[/url]
flashed with odin- at first it showed reset on blue back ground. the phone re started and again struck on the page with samsung logo and model number. then odin showed pass.
but still my phone struck on the same screen. nothing works
[email protected] said:
i have tried to falsh the stock frimware with odin.
downloaded the pack from sammobile.com/firmwares/confirm/36920/S7582DDUANJ1_S7582ODDANJ1_INS/[/url]
flashed with odin- at first it showed reset on blue back ground. the phone re started and again struck on the page with samsung logo and model number. then odin showed pass.
but still my phone struck on the same screen. nothing works
Click to expand...
Click to collapse
any luck guys. pleeeeeeeeeeeeeeees help
[email protected] said:
Hi Guys,
I have the Samsung galaxy S duos (7582) and I believe that my phone has soft bricked.
1.At first the phone will switch on only while connected to charger. Even if its switched on it will just show the start page with Samsung logo and phone model only.
2.I have replaced the battery and tried but it shows the same result. Doesn’t charged up but can switch on the phone (only to start screen with Samsung logo and phone model) with connecting to charger e or PC.
3.The mobile phone is not detected by the PC, but the same has detected by odin. I have passed in odin but unable to access the recovery mode by pressing volume up+home+power buttons. ( i can access downloading mode)
4.Finally I tried to flash stock rom with Odin and it shows Fail.
Appreciate your help.
:crying::crying::crying::crying::crying::crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
Bro exact same things happened with me, listen just connect it to a charger, after hmmmm approx 15mint you will see the phone is charging, and then turn on your device while in charging it will take around 40mint boot up, and after booting every thing will work fine, trust me this had happened with me in past, i hate Samsung and s duos 2 gt-s7582. And you know what every time i turn off the phone its take around 40mint to turn on again. I don't know why it take that much time in boot. Just try my method that will help.

Categories

Resources