Database Info

Anyone knows how to get stock firmware for LG Escape 2 H443 5.1.1 ?

I used the 1 click root on this device and now it's bricked.
It seems that the stock firmware is not available, or at least I have not been able to find it.
Is there anyone who knows how to return this phone to stock?
Also, If I take this brand new (1 day old) back to AT&T and request an exchange due to the phone not working and being stuck at the logo, will they exchange it or test and find out it is rooted and bricked ? Am I out of luck? Suggestions?

bump

Brighter85 said:
bump
Click to expand...
Click to collapse
try this and see if it will give you a firmware to download. some time there is one, some times not. if you get a firmware, then we can work on figuring out how to flash it.

bweN diorD said:
try this and see if it will give you a firmware to download. some time there is one, some times not. if you get a firmware, then we can work on figuring out how to flash it.
Click to expand...
Click to collapse
Thank you replying.
I don't have access to the OS since it is stuck and that is an android app. I do have the imei and other info though, but I have searched everywhere for the firmware and it is not released for this device. Apparently it is an AT&T exclusive.
In any case here is the OS Version 5.1.1
and SW Version H44312g
I posted on another thread in which other users had the same issue and they seemed to resolve the problem, but it is not very clear to me how they did it and they are not very interested in helping either.
Sucks being without a phone.

bump 2

Brighter85 said:
bump 2
Click to expand...
Click to collapse
ahh yea, my bad.
the app pulls from a site where you can enter your imei from pc to check for firmwares.
im working on verifying that i have the right site. i dont want to send you to some hack site by mistake.
ill post the link as soon as i have it verified. i have used it before so i know its ok.

Brighter85 said:
bump 2
Click to expand...
Click to collapse
ok, i have verified this is the right site http://lg-firmware-rom.com/
---------- Post added at 06:08 PM ---------- Previous post was at 05:42 PM ----------
Brighter85 said:
bump 2
Click to expand...
Click to collapse
ok, if the site doesnt work, on this site, there is a mediafire link to a tool to use on your pc to check. the site is not in english.
 @roirraW "edor" ehT gave me the link and said, the tool may get flagged as a virus, but its not. just fyi.

bweN diorD said:
ok, i have verified this is the right site
---------- Post added at 06:08 PM ---------- Previous post was at 05:42 PM ----------
ok, if the site doesnt work, on [URL="[/URL] site, there is a mediafire link to a tool to use on your pc to check. the site is not in english.
@roirraW "edor" ehT gave me the link and said, the tool may get flagged as a virus, but its not. just fyi.
Click to expand...
Click to collapse
Uh oh! @roirraW "edor" ehT said!
FYI, I think I recall reading that AT&T and Sprint don't have KDZs released for their devices, but take that with a grain of salt, it's not from first hand experience - just think I've read other users saying that.

roirraW "edor" ehT said:
Uh oh! @roirraW "edor" ehT said!
FYI, I think I recall reading that AT&T and Sprint don't have KDZs released for their devices, but take that with a grain of salt, it's not from first hand experience - just think I've read other users saying that.
Click to expand...
Click to collapse
yea, he said he thought they might be on lock down, but i figured he could try anyways. he is in a bad spot without some fix,

bweN diorD said:
yea, he said he thought they might be on lock down, but i figured he could try anyways. he is in a bad spot without some fix,
Click to expand...
Click to collapse
Ugh, that sucks!

Hi! Thanks for providing the link and replying.
I checked the IMEI and it returns the following:
Not Available: KDZ format firmware for print LG LS980 and ATT LG E980
THat is strange because this is an LG Escape and the LS980 is an LG G2 and the E980 is an LG Optimus G Pro.
In any case it seems that there really is no firmware available for this phone unfortunately.
I have a paper weight, if it wasn't for google hangouts on my computer, I would not have a phone at all.
Is there any other possible way?
I wonder if the guys on this thread can step up and chime in, but I have sent them private email and all to no avail : http://forum.xda-developers.com/gen...5-1-1-ota-failure-t3175001/page3#post63862368

Brighter85 said:
Hi! Thanks for providing the link and replying.
I checked the IMEI and it returns the following:
Not Available: KDZ format firmware for print LG LS980 and ATT LG E980
THat is strange because this is an LG Escape and the LS980 is an LG G2 and the E980 is an LG Optimus G Pro.
In any case it seems that there really is no firmware available for this phone unfortunately.
I have a paper weight, if it wasn't for google hangouts on my computer, I would not have a phone at all.
Is there any other possible way?
I wonder if the guys on this thread can step up and chime in, but I have sent them private email and all to no avail : http://forum.xda-developers.com/gen...5-1-1-ota-failure-t3175001/page3#post63862368
Click to expand...
Click to collapse
Are you able to enter fastboot mode? Or adb during boot (sometime it launch during boot, even if the phone bootloop) ? If you are, maybe you can ask someone with the same phone to make a dumb of the system (with the command line and dd) and flash it using fastboot?
Or, if possible, use adb yourself to copy a dumb of your system to see what's wrong and maybe fix it and flash it again.
It's just some ideas, i can't promise you that should work .

andralex8 said:
Are you able to enter fastboot mode? Or adb during boot (sometime it launch during boot, even if the phone bootloop) ? If you are, maybe you can ask someone with the same phone to make a dumb of the system (with the command line and dd) and flash it using fastboot?
Or, if possible, use adb yourself to copy a dumb of your system to see what's wrong and maybe fix it and flash it again.
It's just some ideas, i can't promise you that should work .
Click to expand...
Click to collapse
Hi,
Could you please explain how can I enter fastboot mode? If fastboot is when you put it in download mode for firmware update, then yes. If it's something different, I have no idea how to get to that point.

Brighter85 said:
Hi,
Could you please explain how can I enter fastboot mode? If fastboot is when you put it in download mode for firmware update, then yes. If it's something different, I have no idea how to get to that point.
Click to expand...
Click to collapse
Hi,
You should use a computer with the fastboot utility, you can find more explications here : http://forum.xda-developers.com/showthread.php?t=2277112
With a system.img from an other device you can use "fastboot flash system" and give the img as parameter (warning : it's very useful tool, but can brick your phone if wrong used, don't do this until you are confident enough with it).
To make a dumb of a system from an other device, you can use adb or a shell utility and do : "dd if=/dev/block/msm_sdcc.1/by-name/system of=/storage/emulated/0/system.img" on the other device (need root) and copy the system.img to your computer.

andralex8 said:
Hi,
You should use a computer with the fastboot utility, you can find more explications here : http://forum.xda-developers.com/showthread.php?t=2277112
With a system.img from an other device you can use "fastboot flash system" and give the img as parameter (warning : it's very useful tool, but can brick your phone if wrong used, don't do this until you are confident enough with it).
To make a dumb of a system from an other device, you can use adb or a shell utility and do : "dd if=/dev/block/msm_sdcc.1/by-name/system of=/storage/emulated/0/system.img" on the other device (need root) and copy the system.img to your computer.
Click to expand...
Click to collapse
I didn't see it before, but from on an other thread someone already made a dump of this device, in this post : http://forum.xda-developers.com/showpost.php?p=63076799&postcount=19 (the link : System.img, boot.bin, recovery.bin, from wingzeroismine). I assume you can try with it for your phone .

please somebody help me!
hi all, my LG escape 2 is stuck in LG logo, i can't use adb or fastboot or hard reset, nothing works!!, anybody knows if it can repair? and how? thanks a lot

kaav1987 said:
hi all, my LG escape 2 is stuck in LG logo, i can't use adb or fastboot or hard reset, nothing works!!, anybody knows if it can repair? and how? thanks a lot
Click to expand...
Click to collapse
if nothing works, as you say, it cant be fixed.

bweN diorD said:
if nothing works, as you say, it cant be fixed.
Click to expand...
Click to collapse
I am guessing that sending it in for LG to repair will not work? I wonder what would they do once they receive the phone, charge me to install the firmware?

Brighter85 said:
I am guessing that sending it in for LG to repair will not work? I wonder what would they do once they receive the phone, charge me to install the firmware?
Click to expand...
Click to collapse
more than likely, charge you for a new phone. if it was as easy as flashing some new firmware, we could do that, we have the tools they use.
when it wont come on, i dont know if they will just send it back, send you a new one with a bill, or call you to see what you want to do.

I got it to boot!!!
I have a potential fix for this problem however, xda rules won't let me post a link to the fix that I used. Maybe pm me for details.

Dirty Santa on H990 Singe

Hi all,
Has anyone tried the unmodified dirty Santa on the h990.
Im lookink in emdroidle user thread
https://forum.xda-developers.com/v20/how-to/bounty-thread-lg-v20-root-h990ds-t3493062/page17
hows working on the 990ds.
And he said that the unmodified original dirty Santa should work.
And the question if it will went brick this will resotre to stock?
https://forum.xda-developers.com/v20/how-to/restore-v20-to-100-stock-bricked-devices-t3524903
???

No one had tried yet as far as i know .
For me i didnt get an answer for restore back if i bricked my device with this method . so its kinda riscky for me as i dont have another device to use if i bricked mine .

Seems like there's a compile files in the link directry to the h990 if bricked.

There is a kdz available for the h990 single sim so just try it. If it doesnt work then let me know and ill see if i can help. But you can restore to stock using the kdz

Hamodi said:
No one had tried yet as far as i know .
For me i didnt get an answer for restore back if i bricked my device with this method . so its kinda riscky for me as i dont have another device to use if i bricked mine .
Click to expand...
Click to collapse
me2151 said:
There is a kdz available for the h990 single sim so just try it. If it doesnt work then let me know and ill see if i can help. But you can restore to stock using the kdz
Click to expand...
Click to collapse
Actually this phone is from work...
So im a bit affriad that it will bricked.
your suggesting to follow the original dirty Santa thread?
What about kernel and boatloader & twrp?

what he said if you bricked it you can flash the KDZ back and unbrick it .
bootloader and twrp is something else tho first need to see if dirty santa work with it and then try to make twrp works too
im backing up my phone now will see if i can had it work
---------- Post added at 02:33 PM ---------- Previous post was at 02:12 PM ----------
@me2151 my firmware is 10c-isr-xx
i found kdz for my region 10c-00-open . is it the same one ?? sorry if it sound noob

Hamodi said:
what he said if you bricked it you can flash the KDZ back and unbrick it .
bootloader and twrp is something else tho first need to see if dirty santa work with it and then try to make twrp works too
im backing up my phone now will see if i can had it work
---------- Post added at 02:33 PM ---------- Previous post was at 02:12 PM ----------
@me2151 my firmware is 10c-isr-xx
i found kdz for my region 10c-00-open . is it the same one ?? sorry if it sound noob
Click to expand...
Click to collapse
thats great news hamodi...
waiting for you replay...may the force be with you

ok i run the method but i get stuck on lg boot screen !!
all the 3 steps runs with no error

Hamodi said:
ok i run the method but i get stuck on lg boot screen !!
all the 3 steps runs with no error
Click to expand...
Click to collapse
Stuck on This one?
3) Plug your device into the computer and verify ADB is working. Then;
On Windows, double-click "RUNMEFIRST.bat, DO NOT CLOSE THE LOG WINDOW THAT OPENS, then double-click "Step1.bat"
Thanks...

no all the 3 step.bat had been complete
now im on twrp recovery
this mean it works ??

me2151 said:
There is a kdz available for the h990 single sim so just try it. If it doesnt work then let me know and ill see if i can help. But you can restore to stock using the kdz
Click to expand...
Click to collapse
Did you got to twrp screen?
https://forum.xda-developers.com/v20/how-to/how-to-fix-twrp-bootloop-t3513580
I think that me2151 can help us move forward.

Hamodi said:
no all the 3 step.bat had been complete
now im on twrp recovery
this mean it works ??
Click to expand...
Click to collapse
If you have team viewer I can take a look at it and figure it out

me2151 said:
If you have team viewer I can take a look at it and figure it out
Click to expand...
Click to collapse
i can download it , i just want it to work back

Hamodi said:
i can download it , i just want it to work back
Click to expand...
Click to collapse
Ok. Download it then PM me when you are ready

Alright. Heres the update. Root is nogo on the single sim 990. DO NOT ATTEMPT IT. The KDZ will not properly flash.

@me2151 , i see that the SD did not been wipped after all !!
dont know why it was empty on twrp and Cmd !!

Hamodi said:
@me2151 , i see that the SD did not been wipped after all !!
dont know why it was empty on twrp and Cmd !!
Click to expand...
Click to collapse
Oh really? now THATS interesting. The twrp image is not compatible with your phones hardware then. But at least everything works now.

me2151 said:
Oh really? now THATS interesting. The twrp image is not compatible with your phones hardware then. But at least everything works now.
Click to expand...
Click to collapse
So if we get compatible one it might work no?!

Hamodi said:
So if we get compatible one it might work no?!
Click to expand...
Click to collapse
No. Your device has different hardware so its not able to boot properly(the blue screens we were getting). Most likely the same modifications that the H990DS will need you guys will need. Sorry.

Guys thanks for the update....

Honor 8 bricked after failed unroot attempt. Please help!

Hey everyone. I rooted my Honor 8 yesterday using the following guide: https://www.xda-developers.com/honor-8-root-twrp-and-xposed/. Everything seemed to work fine at first, but soon my Bluetooth refused to turn on at random and apps constantly crashed (either on startup or when switching between them). It got annoying very quickly and after searching for hours and not finding any real solution, I decided root wasn't that important to me and I'd just unroot my phone and then hard reset. After using SuperSU's unroot function, my phone turned off and rebooted. But when it got to the blue screen with the honor logo, it froze. Nothing does anything. No matter which buttons I press/hold down. It's just stuck on that screen. I'd love to take out the battery, but with these new phones, it's sadly built in (who ever thought that was a good idea?). It's been this way for close to an hour. ADB doesn't recognize it anymore. The only way my PC seems to recognize it at this point is through the Device Manager, where it shows the yellow warning sign. Under Properties > General it reads "This device cannot start. (Code 10)". I've tried a few different things but none of them have worked. So this is where I'm at now. I'd hate to lose this phone since I just got it three months ago. I would really appreciate any sort of help, because I'm grasping at straws.

Rommco05 said:
Have you still access to twrp? When u trun on phone still is in bootloop. Which is your model and which was system last working?
Click to expand...
Click to collapse
Sorry, I might not have made this clear, but I can't even turn my phone off. It's literally stuck on the blue screen (how fitting). The model should be 51090QMF, but I don't know what you mean with the last part.

Rommco05 said:
51090QMF...??? Model must something like FRD-LxxCxxxBxxx
---------- Post added at 21:08 ---------- Previous post was at 21:08 ----------
Try reboot phone and hold vol +
Click to expand...
Click to collapse
My bad, I just looked it up on Amazon (where I bought it) and it said model number. This should be the real one: FRD-L09. The reboot worked, but it's still stuck on the honor logo. At least we know it's not hard-bricked now.
EDIT: I was able to get into eRecovery. Should I just press "Download latest version and reecovery"?

Rommco05 said:
Which system works last one? and for which region is your phone? Cxxx
Click to expand...
Click to collapse
I bought my phone from the German amazon site, so whichever one that is. I'm sorry, but I don't quite understand your system question. I used 7.0 if that's what you're referring to.

Rommco05 said:
Now understand so your model is FRD-L09?(32Gb ROM)/L19?(64Gb ROM)C432(EU)
So when phone rebooting u still se message your device is unlocked nad cat be trusted?
Click to expand...
Click to collapse
Yes, the 32GB one. And as I said, I was able to get into the Huawei eRecovery. I'm guessing I should just hit "Download latest version and recovery" at this point, but I was waiting just to be sure.

Rommco05 said:
You have still unlocked bootloader?
Try this:
1.create dload folder on inter. storage or sdcard
2.unzip zips which I here posted
3.put uziped separately to float
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G753/g104/v73856/f1/full/update.zip
http://update.hicloud.com:8180/TDS/...3856/f1/full/hw/eu/update_data_full_hw_eu.zip
Click to expand...
Click to collapse
I do still have unlocked Bootloader, but at the moment I have no way to use it. My PC (ADB included) doesn't recognize the phone.

Rommco05 said:
What about two is still in your phone? Unplug phone from usb and reboot, + hold vol up but must be unluged after try dload method with sdcard
Click to expand...
Click to collapse
holding vol up just brings me to the eRecovery menu, where I can't do much. I'm not sure how much of twrp is still on my phone. Before I tried to unroot, all of it was.
EDIT: Sorry, never mind. I got into TWRP.

Rommco05 said:
Try dload method with zips which I posted
---------- Post added at 09:00 PM ---------- Previous post was at 08:56 PM ----------
Bootloader is still unlocked? If yes I tomorrow extract update app send you all parties which u nees to flash over fastboot if dload dont work for you
Click to expand...
Click to collapse
I'm currently downloading your files, my bootloader is unlocked. After I have the files unzipped, do I just flash them? If so, in what order?
Edit: Welp, he went offline. Can someone else tell me what to do with these files?

Rommco05 said:
How wrote before, unzip this files and separately put each unzipped to dload on sdcard, first bigger one
---------- Post added at 09:33 PM ---------- Previous post was at 09:30 PM ----------
If are this files in dload folder turn phone or reboot + hold vol down together with vol up
Click to expand...
Click to collapse
Thank god, it booted. Thank you so much. What would be the best way to go about getting rid of root now? I'm willing to do a factory data reset at this point for everything to work again.

Rommco05 said:
Good job man for properly root go to developer section and twrp 3.1.1-1 by OpenKirin all steps is there
Click to expand...
Click to collapse
I'm just gonna go back to not having root after this, haha. It was just something I wanted to try, I don't need it that much. I did a factory reset and will now get my most important data back on my phone (thankfully I have a backup). Still, thank you so much for your help. I don't know what I would've done without you. I "Thanked" all your posts here, which is the least I can do.

Root your G7 with Magisk

Notice: before doing it, make sure your phone bootloader is unlocked or it won't work
This will require you to find a matching full ROM. To find your matching channel, go to Settings > About Phone > Software channel
Lookup the first two letters and find the matching ROM there
https://mirrors.lolinet.com/firmware/moto/river/official/
If your phone channel is "US Retail", download RETUS (retail US)
After you have downloaded the full ROM (you should keep the full ROM in case you want to revert to stock unrooted), unzip and get boot.img. Copy the image to your phone and use Magisk to patch the image. After that, copy the output image to your host computer.
Now turn your phone off, press and hold power + volume down to enter bootloader, connect your phone to host computer, and enter
Code:
fastboot flash boot
Press space once and drag and drop the output image file to command window.
If everything goes well, restart the phone and confirm it is rooted with Magisk
Now you have rooted G7

Nice solution. Did not even need TWRP for this either.

Seems to be oversimplified. I'm sure this makes perfect sense to those that go through the root process often or at least recently.
Unfortunately I'm not one of those. Last device I rooted was about 5-6 years ago.
I'll be doing my homework on the new tools and procedures while waiting for a more detailed step-by-step guide.
Thank you for your efforts and at least I know that root is possible.

Please can you guys make the steps easy to understand...some people here are new in this method.... Thanks

Question
What will my mirror be if Software Channel says Amazon?

O7ymand1as said:
What will my mirror be if Software Channel says Amazon?
Click to expand...
Click to collapse
I don't think Amazon version allows you to unlock the bootloader
Alternative method: look at the appendix of model on the box and find a matching one

O7ymand1as said:
What will my mirror be if Software Channel says Amazon?
Click to expand...
Click to collapse
I was able to unlock mine from amazon, it was XT1962-1 and said software variant amz and software channel amazon. For root I did have to flash with stock rom. The steps I took are listed in moto g7 questions thread. Look for amazon in the title.

I just picked up a G7 to play with today.
@mingkee I'm assuming these are similar to the Pixel devices when an OTA is sent we can just reflash the Stock boot.img and then take the OTA and re-root using the same methodology above?

Itachisasuke said:
I just picked up a G7 to play with today.
@mingkee I'm assuming these are similar to the Pixel devices when an OTA is sent we can just reflash the Stock boot.img and then take the OTA and re-root using the same methodology above?
Click to expand...
Click to collapse
Yes, as long as using correct boot.img

I tried with G7 Play - Channel
Did not work. These errors occurred in the prints.

Marcondes BR said:
Did not work. These errors occurred in the prints.
Click to expand...
Click to collapse
You should be good. The bad key error is normal. What happened on reboot?

Marcondes BR said:
Did not work. These errors occurred in the prints.
Click to expand...
Click to collapse
Don't worry about the error.
Install Magisk Manager and required components and that's it.
Keep the original boot in case to get OTA, but you should get updated full ROM and get updated boot and patch and flash again

timecutter said:
You should be good. The bad key error is normal. What happened on reboot?
Click to expand...
Click to collapse
Rebooted normally. When it starts, the screen turns completely black, and bad key is written in the upper left corner. It restarted in the same way.
---------- Post added at 02:06 PM ---------- Previous post was at 01:59 PM ----------
mingkee said:
Don't worry about the error.
Install Magisk Manager and required components and that's it.
Keep the original boot in case to get OTA, but you should get updated full ROM and get updated boot and patch and flash again
Click to expand...
Click to collapse
Can you explain this better? Did not quite understand.

This method works flawlessly. Thanks for the tip.

Marcondes BR said:
Rebooted normally. When it starts, the screen turns completely black, and bad key is written in the upper left corner. It restarted in the same way.
---------- Post added at 02:06 PM ---------- Previous post was at 01:59 PM ----------
Can you explain this better? Did not quite understand.
Click to expand...
Click to collapse
Boot.img should match ROM version or you may have trouble booting.
New OTA has been released for US, but it's recommended to wait for updated full ROM in order to regain root.

mingkee said:
Boot.img should match ROM version or you may have trouble booting.
New OTA has been released for US, but it's recommended to wait for updated full ROM in order to regain root.
Click to expand...
Click to collapse
Did not work.
My bootloader is unlocked.
The boot.img image is correct.
I did it step by step and it did not work.
I do not get root and magisk says that it is not installed.

Marcondes BR said:
Did not work.
My bootloader is unlocked.
The boot.img image is correct.
I did it step by step and it did not work.
I do not get root and magisk says that it is not installed.
Click to expand...
Click to collapse
Did you patch boot.img?

my moto g7 non variant river phone channel said "US Retail", but the required rom info was under River/Official/Retail, not River/Official/Retus. When I tried Retus, it bootlooped until I flashed Retail. FYI for anyone encountering same issue.

mingkee said:
Did you patch boot.img?
Click to expand...
Click to collapse
Yeah. I copied the patch boot to my computer and flashed with adb.

My software channel is "reteu2" and the software version is PPW29.98-28.
Under river/official/RETEU/ I cannot find a suitable software version. Is my version not available there?

HTC U11 OS 3.34.401.1 - Boot issue

Hey guys,
My device doesn't want to boot in the right way.
I've flashed RUU with the same version as before to see if this is the solution but nothing changed.
It boots till the welcome assist, like it was a new phone. That's okay but I can't get further this point.
It wants me to turn WLAN on and connect it. But there is no possibility to turn WLAN on?
I think it's because my memory is crypted and can only be encrypted by connecting with my google account. Is there a way to delete that cryption on my memory?
Or do you guys know how to activate WLAN with cmd or somehting like that?
I need really help here, I don't know what I can do any further. Do you guys think TWRP should be an option?
Thanks in advance!

DtwoK376 said:
Hey guys,
My device doesn't want to boot in the right way.
I've flashed RUU with the same version as before to see if this is the solution but nothing changed.
It boots till the welcome assist, like it was a new phone. That's okay but I can't get further this point.
It wants me to turn WLAN on and connect it. But there is no possibility to turn WLAN on?
I think it's because my memory is crypted and can only be encrypted by connecting with my google account. Is there a way to delete that cryption on my memory?
Or do you guys know how to activate WLAN with cmd or somehting like that?
I need really help here, I don't know what I can do any further. Do you guys think TWRP should be an option?
Thanks in advance!
Click to expand...
Click to collapse
Is it possible to get a pic of the screen your stuck at?
Also I thought there was a option ( radio button) to skip that part. Hth

hammered58 said:
Is it possible to get a pic of the screen your stuck at?
Also I thought there was a option ( radio button) to skip that part. Hth
Click to expand...
Click to collapse
Hey Thanks for your answer. Yeah I can send one in a minute. :good:
What means radio button? That would be awsome

hammered58 said:
Is it possible to get a pic of the screen your stuck at?
Also I thought there was a option ( radio button) to skip that part. Hth
Click to expand...
Click to collapse
Here are the pictures:
https: //ibb.co/K6H24kP
https: //ibb.co/qFfQB4G
https: //ibb.co/w6qBzV5
(I'm not allowed to post links, so you need to delete the spaces after https:
The one saying Set up internet access is the one I can't go further.
thanks

DtwoK376 said:
Here are the pictures:
https: //ibb.co/K6H24kP
https: //ibb.co/qFfQB4G
https: //ibb.co/w6qBzV5
(I'm not allowed to post links, so you need to delete the spaces after https:
The one saying Set up internet access is the one I can't go further.
thanks
Click to expand...
Click to collapse
I really can not tell from those pictures, when i open them they are very bad, could u try again.

hammered58 said:
I really can not tell from those pictures, when i open them they are very bad, could u try again.
Click to expand...
Click to collapse
This is screen shot of what i get

hammered58 said:
This is screen shot of what i get
Click to expand...
Click to collapse
Oh really? If I open that link it works well.. mhm okay maybe upload to imgur. I'll give it a try.
How did you add that picture?

hammered58 said:
This is screen shot of what i get
Click to expand...
Click to collapse
So please try this one:
https:// share-your-photo.com/cca2e04d4e

DtwoK376 said:
Oh really? If I open that link it works well.. mhm okay maybe upload to imgur. I'll give it a try.
How did you add that picture?
Click to expand...
Click to collapse
See screen shot

hammered58 said:
See screen shot
Click to expand...
Click to collapse
Oh nice. I do not have this options. maybe cause I'm new here...
But please try my last link.

DtwoK376 said:
Oh nice. I do not have this options. maybe cause I'm new here...
But please try my last link.
Click to expand...
Click to collapse
Ok got it ,, so if you go into scanning settings what happens?

hammered58 said:
Ok got it ,, so if you go into scanning settings what happens?
Click to expand...
Click to collapse
I can turn on to allow apps to scan for wifi. Then press the butto to go back and the phone turns black except the watch upper right and the lock upper left side.
Then after 2 minutes it stays at either at the welcome screen or just back at the screen I've sent to you.
I've had also one time the message that the applikation android settings crashed and if I want to sent the report to HTC. But this was just one time.
I still think it's a software issue. But it has to be outside the firmware. Maybe my bootloader is not working correctly. What do you think about that?

Wow thats a good one,,, have you tried various other ruu that are compatable with your phone? What is the ruu version you tried
? oreo? nougot?

hammered58 said:
Wow thats a good one,,, have you tried various other ruu that are compatable with your phone? What is the ruu version you tried
? oreo? nougot?
Click to expand...
Click to collapse
I've just tried this one:
2PZCIMG_OCEAN_UHL_P90_SENSE10GP_MR_HTC_Europe_3.34 .401.1_Radio_8998-200321-1905141529_release_signed.zip
I do not have tried other versions cause I wasn't sure which ones are matching my phone. I'm downloading this version as OTA right know with R1 special.
Just to give OTA update a try and maybe that R1 fixes my problem.

Is that a pie ruu? Where you on pie? Can you list your cid,,mid?

hammered58 said:
Is that a pie ruu? Where you on pie? Can you list your cid,,mid?
Click to expand...
Click to collapse
Yes it is. Yes I was already on this stage. I never had problems since I tried to restart the phone. It just booted one more time but I had to restart again. Since that day it doesn't boot anymore.
yes I can tell you.
HTC-Download-mode screen:
https:// share-your-photo.com/8e7101206b
Pie RUU 3.34.401.1 for WWE
OCEAN_UHL (Single SIM), Product ID: htc_ocnuhl, CIDs: HTC__001 / HTC__002 / HTC__034 / HTC__M27 | MID: 2PZC10000

at the download mode screen just type fastboot getvar all
---------- Post added at 02:08 PM ---------- Previous post was at 02:05 PM ----------
I also see from that screen that your bootloader is locked which pretty much leaves other solutions impossible.

hammered58 said:
at the download mode screen just type fastboot getvar all
---------- Post added at 02:08 PM ---------- Previous post was at 02:05 PM ----------
I also see from that screen that your bootloader is locked which pretty much leaves other solutions impossible.
Click to expand...
Click to collapse
Yes I first have to connect to laptop. I'm at work and don't know what they think when I'm rooting my phone at work. But so what
I'll give it a try.
Yes I know it's locked but I have nothing against an unlock. Just did it not cause everythin was working and I was really okay with the official software.
If you can give me an advise how to unlock I can do. No problem.

hammered58 said:
at the download mode screen just type fastboot getvar all
---------- Post added at 02:08 PM ---------- Previous post was at 02:05 PM ----------
I also see from that screen that your bootloader is locked which pretty much leaves other solutions impossible.
Click to expand...
Click to collapse
Here you go
https:// share-your-photo.com/9dd2e409aa

If you were unlocked and rooted you could try to downgrade to oreo or nougat, at this point with it being locked thats impossible. Hopefully someone else has more knowledge than me and can give you better advise. Maybe keep trying different ruus.