Related
I lost my wall charger that came with my HP touchpad. The round plug thingie is what I'm looking for. Searching on Amazon brings up a number of items, for example:
http://www.amazon.com/HP-North-American-Charger-TouchPad/dp/B0055QYJJM/ref=dp_cp_ob_e_title_3
However, is there an alternative that works? I was able to use the Evo cable rather than the original HP sync/charge cable that came with the wall charger, but is there an alternative wall plug that works as well? Paying almost $28 for a charging cable seems a bit ridiculous.
Any help and advice would be most appreciated.
[[FOUND MY ANSWER]]
I found that Walmart was having a sale on the North American charger with the barrel wall connector for $11.99 and Meritline was having a sale for 6' long USB to micro-usb cables (pair for $4.99 no tax/shipping).
The listing on the Meritline page says that the cables are compatible with the Evo.
Given that the cable that comes with the HP barrel charger is pretty much monkey spit and fails within a month, I found a solution that works for less than $20.
Links are below:
Walmart HP Touchpad charger
http://www.walmart.com/ip/HP-TouchPad-Accessory-Travel-AC-Wall-Adapter-Charger/16641536
Meritline Cables (use this code MLCK222YNL1 for discount (cannot guarantee how long this code is good for, drops the price for a twin pack of the 6' cables from $10.99 to $4.99)
http://www.meritline.com/showproduc...e=6-feet-high-speed-micro-hdmi-cable-ethernet
Pretty much any USB charger will work, but most give a notification on the Touchpad screen indicating that they may not be charging. This is because the official charger is at the high end of both voltage and current capability. I charge from laptop, desktop and a variety of Blackberry chargers with no issue, but the available current will determine how long it takes to charge and whether it charges much while the screen is on. Go for a USB charger that gives you 2 Amps and you should be fine.
dmarchant said:
Pretty much any USB charger will work, but most give a notification on the Touchpad screen indicating that they may not be charging. This is because the official charger is at the high end of both voltage and current capability. I charge from laptop, desktop and a variety of Blackberry chargers with no issue, but the available current will determine how long it takes to charge and whether it charges much while the screen is on. Go for a USB charger that gives you 2 Amps and you should be fine.
Click to expand...
Click to collapse
Thank you for the advice. To be more specific, can you recommend any alternative charging cables/wall charger units specifically?
Any brand name USB charger that gives off 2 amps should be fine. I tend to stay away from really cheap generic chargers. Any microUSB cable should be fine even a generic one if it has decent reviews. I worry about generic chargers since a poorly regulated one could send a voltage too high, but generic cables should be fine.
The chargers I am currently using, as well as the one that came with the TP, are the one that came with a Blackberry Playbook and the one from my HTC Desire HD.
The Blackberry charger gives an error on the screen that it may not charge the TP, but as it gives 2 amps, charges in pretty much the same time as the official unit.
The HTC again gives the warning and takes about twice as long to charge.
what about the nook color charger i know it higher amps might work as well
cesar2010 said:
what about the nook color charger i know it higher amps might work as well
Click to expand...
Click to collapse
I just tested the TP with a charger for the NC, and unfortunately, it still gives the same "may not charge" warning...
There is NO after market charger that will charge at full rate like the HP barrel charger!
At best they will trickle charge at a much lower rate and take considerably longer to charge.
The TP relies on precise signaling which it will only get from the OEM item or specially modded after market units or cables.
Do a google for further info ie webosnation.com forums.
I think your looking for a 5.1v charger, aka rapid charger. This is used by the iPad, and some android phones like the Motorola droid 3, razr and htc rezound.
I could be wrong though,I haven't gotten my touchpad yet.but I do own all said device above (except the razr) and they all use the faster charging technology.
Sent from my rezound.
Izeltokatl said:
I think your looking for a 5.1v charger, aka rapid charger. This is used by the iPad, and some android phones like the Motorola droid 3, razr and htc rezound.
I could be wrong though,I haven't gotten my touchpad yet.but I do own all said device above (except the razr) and they all use the faster charging technology.
Sent from my rezound.
Click to expand...
Click to collapse
They will not work at full rate!
No one else uses 5.2 volts
Sent from my Samsung Galaxy S2
Don't believe all the hype about using ONLY the HP charger, there are many that do the job perfectly well. Too many people make these authoritarian statements and all they do is cause FUD.
At my office, I use the AC charger from my last Samsung phone (mythic) and it works IDENTICALLY to the OEM one. I have also used a Moto and and LG with NO PROBLEMS. I have no issues getting to fully charged in little time.
At home, my OEM cable is plugged into a high-power USB port (2.1A, I believe) and it has no problem charging from near zero to full as well. Front or top-mounted USB ports tend to be 500mA or less, but the rear ones (coming directly off the motherboard) tend to have a higher supply. I also use a non-HP USB cable occasionally and it works fine.
(I got my TP during the original fire-sale and have been charging it these ways ever since with ZERO ISSUES.)
R1ptide said:
No one else uses 5.2 volts
Sent from my Samsung Galaxy S2
Click to expand...
Click to collapse
The small voltage difference is marginal and isn't going to matter, the internal hardware should be able to tolerate a few tenths of a volt difference. In fact, I tested my Motorola charger rated at 5.1v and the Touchpad charger rated at 5.2v on a multimeter. The Motorola charger was outputting 5.20v and the Touchpad charger 5.16v. Granted this is at no load, but switching transformers are regulated so they should supply rated voltage at any current draw equal to or less than rated. Also depending on how well the voltage is regulated there may still be a slight AC ripple that the device has to deal with.
Does anyone know the time difference between using the TP charger and a standard droid/blackberry charger? Also curious if the charges last the same. I know theoretically they should since the battery is full either way, but electricals can be tricksiy..
sirclesam said:
Does anyone know the time difference between using the TP charger and a standard droid/blackberry charger? Also curious if the charges last the same. I know theoretically they should since the battery is full either way, but electricals can be tricksiy..
Click to expand...
Click to collapse
Its all down to the charge rate that the TP is able to draw.
2A which is theoretically possible from TP AC barrel charger would charge the 6A+ battery of the TP from flat to full in approximately 6.5 hours.
If the BB charger were able to have 500mA drawn by the TP then it would fully charge in approximately 26 hours.
The charges would be no different.
To convert any regular USB charger into a TouchPad charger you need to add 2 resistors as per the diagram attached.
The presence of the resistors will trigger the TouchPad to draw the full 2A from the charger rather than the trickle charge it does when they are not there.
Please do not modify a cheap charger that is only rated for 500mA as you will most likely overheat it and it could present a fire risk.
stuart_f said:
To convert any regular USB charger into a TouchPad charger you need to add 2 resistors as per the diagram attached.
The presence of the resistors will trigger the TouchPad to draw the full 2A from the charger rather than the trickle charge it does when they are not there.
Please do not modify a cheap charger that is only rated for 500mA as you will most likely overheat it and it could present a fire risk.
Click to expand...
Click to collapse
Just pointing out that you need to start with a charger that is rated at least 2Ah to start with.
You can't turn a low rated one into a high rated one.
pa49 said:
Just pointing out that you need to start with a charger that is rated at least 2Ah to start with.
You can't turn a low rated one into a high rated one.
Click to expand...
Click to collapse
oh, for the love of gods. REALLY? I was just asking for a replacement cable. I don't want to reinvent the charging paradigm. I just need a simple recommendation for a cable. If a thread could be highjacked any further I don't know how it could be.
I appreciate all your "advice" but seriously, this is NOT what I was asking.
Anyone know if I can get a similar cable in the UK? Kind of lost my TP cable, and I miss the flexibility the long cable gave me, it was so much easier to use on charge!
well i know that my tbolt cable works. i have to use the tp adapter though. my tbolt adapter makes the touchpad say that the charger is incompatible.
I have ordered a Moto G from England (GSM global version I presume), and while I am waiting for it to arrive, I would like your advice on what kind of wall charger to buy that would be optimal for the phone charge recommendations since my knowledge on the issue is very minimal.
I read somewhere that Motorola recommends between 0.5 - 1.5A , but that doesn't really tell me anything.
I have an old Samsing galaxy SII. Can I use the charger of the Galaxy for the Moto G? The output is 0.7A
As you said, any charger where the output is not too high (I recommend below 2a or below 2,5 to not stress the battery.
Conclusion: your samsung charger should work perfectly!
Edit: if you experience bad/not so good battery life (I did after update to kitkat), let your phone drain completely (shuts down) and recharge it to 100% and leave plugged in like 30-1h after it reached 100%.
But don't do this too often as it will harm your battery over time.
creambyemute said:
As you said, any charger where the output is not too high (I recommend below 2a or below 2,5 to not stress the battery.
Conclusion: your samsung charger should work perfectly!
Edit: if you experience bad/not so good battery life (I did after update to kitkat), let your phone drain completely (shuts down) and recharge it to 100% and leave plugged in like 30-1h after it reached 100%.
But don't do this too often as it will harm your battery over time.
Click to expand...
Click to collapse
Thanks. With 0.7 output would the charge be slow or fast?
creambyemute said:
As you said, any charger where the output is not too high (I recommend below 2a or below 2,5 to not stress the battery.
Conclusion: your samsung charger should work perfectly!
Edit: if you experience bad/not so good battery life (I did after update to kitkat), let your phone drain completely (shuts down) and recharge it to 100% and leave plugged in like 30-1h after it reached 100%.
But don't do this too often as it will harm your battery over time.
Click to expand...
Click to collapse
Using a charger over 2A doesn't stress the battery because the Moto G limits the current to 1.5A.
It says so right here : https://motorola-global-portal.cus...prod_answer_detail/a_id/97318/p/30,6720,9050
”Any Motorola charger with the correct micro-USB tip will charge your Moto*G. You will see the best results when the output of the charger is between 500 mA and 1.5 A. The higher the output, the faster your Moto G*will charge.
If your charger output is higher, the MOTO G will automatically restrict the charging rate. If your charger is lower, it will simply take longer to reach a full charge.”
I use my nexus 7 2A charger daily and it charges noticeably faster than my 1A HTC charger and is as Motorola stated, perfectly safe.
A 0.7A charger would charge pretty slow!
Sent from my Moto G using Tapatalk
Just under 3hrs for a 0% to 100% charge with a .75 A charger for me.
Sent from my XT1032 using XDA Premium 4 mobile app
Im using a HTC charger i already had which is rated at 1a ,seems to be working fine.
my 0.5A from 20% to 100% ~3 hours. When charging from less than 20%, I often put my phone to aeroplane mode and get ~3 hours of charging too
Sent from my XT1032
mdentener said:
Using a charger over 2A doesn't stress the battery because the Moto G limits the current to 1.5A.
It says so right here : https://motorola-global-portal.cus...prod_answer_detail/a_id/97318/p/30,6720,9050
”Any Motorola charger with the correct micro-USB tip will charge your Moto*G. You will see the best results when the output of the charger is between 500 mA and 1.5 A. The higher the output, the faster your Moto G*will charge.
If your charger output is higher, the MOTO G will automatically restrict the charging rate. If your charger is lower, it will simply take longer to reach a full charge.”
I use my nexus 7 2A charger daily and it charges noticeably faster than my 1A HTC charger and is as Motorola stated, perfectly safe.
A 0.7A charger would charge pretty slow!
Sent from my Moto G using Tapatalk
Click to expand...
Click to collapse
Many thanks. Could you recommend me on a good and not expensive charger that would do the job and charge it fast?
Since I dont live in the US, amazon is kind of useless to me since there are very few items they ship outside the US, so eBay would be a better option. I just dont want to buy something crappy
mazinya said:
Many thanks. Could you recommend me on a good and not expensive charger that would do the job and charge it fast?
Since I dont live in the US, amazon is kind of useless to me since there are very few items they ship outside the US, so eBay would be a better option. I just dont want to buy something crappy
Click to expand...
Click to collapse
I use a Blackberry branded 0.75mah micro usb charger which works well as does my Samsung Galaxy Tab2 which is 2amp charges nicely too.
I found an older HTC usb 0.7 charger did not work at all well for some reason.
charger doesn't push power, phone draws power, as long as you have the right voltage you are good
Pinktank said:
charger doesn't push power, phone draws power, as long as you have the right voltage you are good
Click to expand...
Click to collapse
Indeed but I've found some chargers vary for example my Samsung 2amp Galaxy Tab2 charger will not charge my Moto Defy+ phone, it sits there forever doing very little but the Moto G is fine with it. Probably due to the Defy+ only drawing 500mah and the Galaxy charger sees this as undercurrent and doesn't output whereas the MotoG can demand up to 1500mAh current which the Galaxy charger sees as acceptable and supplies the current.
I'd avoid any of the super cheap nasty Chinese crap chargers that seem very poorly built, unstable and potentially a death trap.
spannerz said:
Indeed but I've found some chargers vary for example my Samsung 2amp Galaxy Tab2 charger will not charge my Moto Defy+ phone, it sits there forever doing very little but the Moto G is fine with it. Probably due to the Defy+ only drawing 500mah and the Galaxy charger sees this as undercurrent and doesn't output whereas the MotoG can demand up to 1500mAh current which the Galaxy charger sees as acceptable and supplies the current.
I'd avoid any of the super cheap nasty Chinese crap chargers that seem very poorly built, unstable and potentially a death trap.
Click to expand...
Click to collapse
Sorry I meant to quote the advice above that said don't get something with too large a current.
Absolutely avoid cheap chargers, burnt home totally not worth the savings. The hp chargers left from the time they used to make tablets are pretty good actually, tested with an oscilloscope
I dont want a crappy cheap Chinese charger. Thats why I am asking for a recommendation. I have a nexus 7 2013 and the output is 2A. I assume I can use it also to charge the Moto G?
mazinya said:
I dont want a crappy cheap Chinese charger. Thats why I am asking for a recommendation. I have a nexus 7 2013 and the output is 2A. I assume I can use it also to charge the Moto G?
Click to expand...
Click to collapse
That should be fine
That's funny hey, the Australian version comes with USB cable wall charger and Motorola headset. This is the XT1033 variant.
Sent from my XT1033 using Tapatalk
mdentener said:
I use my nexus 7 2A charger daily and it charges noticeably faster than my 1A HTC charger and is as Motorola stated, perfectly safe.
Click to expand...
Click to collapse
I'm curious, is your 2A charger for a 2012 Nexus 7? Because I also plan to use my 2012 Nexus 7 charger on my Moto G, which is coming next week. How quickly does it charge the Moto G?
consolegam3r said:
I'm curious, is your 2A charger for a 2012 Nexus 7? Because I also plan to use my 2012 Nexus 7 charger on my Moto G, which is coming next week. How quickly does it charge the Moto G?
Click to expand...
Click to collapse
Yeah my nexus 7 is a 2012 model also, works just fine and charges really fast. I'll stopwatch my next recharge and report.
Edit: It charges from 10% to 100% in 2 hours with my nexus 7 2012 2A charger while incidentally using it.
Next charge I'll try my HTC 1A charger to monitor the difference
Sent from my Moto G using Tapatalk
2 hours 10 minutes from 0% to 100% with 1A charger
mdentener said:
It charges from 10% to 100% in 2 hours with my nexus 7 2012 2A charger while incidentally using it.
Next charge I'll try my HTC 1A charger to monitor the difference
Click to expand...
Click to collapse
Great, thanks for finding out!
I have a charger from Htc Explorer with this specification Input: 100-240v~200mA 50/60hz / Output: 5V-1A , and don't seems to work very well, is normal???
Thanks in advance
I'm looking for a car charger that charges quickly, even when more than 1 port is being used at the same time. I tried finding a Benson approved list somewhere but was not able to locate one.
What chargers do you guys recommend?
Get something with high amperage to cover the devices you want to charge. I bought a 3A that gives me great charging on my 6p but reduces with a second device.
There is an Anker one on Amazon for pretty cheap that has a USB-C, QuickCharge and 2 normal USBs. I use it to charge my Droid Turbo, the 6P and my dash cam with no issues.
An answer in Lenovo's support forums says the G5 does not support Turbo Power, but it comes with a 10W rapid charger. The problem that here in Brazil not even this 10w charger gets shlpped with the phone, neither can I find it for sale, so I'm thinking about getting a 15W Turbo Power charger, does anyone knows if it'll charge the G5 (25W and above are reportedly not working with the G5)
It won't work, But you'll get fast charge tho (NOT TurboCharge, which is even faster. Just standart fast charge)
Randonio said:
It won't work, But you'll get fast charge tho (NOT TurboCharge, which is even faster. Just standart fast charge)
Click to expand...
Click to collapse
Will fast charge charpe it faster than a 5V-2A charger?
freeZbies said:
Will fast charge charpe it faster than a 5V-2A charger?
Click to expand...
Click to collapse
Maybe? I'll test it, and say the results
Randonio said:
Maybe? I'll test it, and say the results
Click to expand...
Click to collapse
Ok, if you do it, that'll hilp a lot, since moto G5 came with this standard 2A charges.
I bought my Moto G5 in Brazil near the launch date, it did come with the 10 W charger (5V-2A, W = V x A, do the math). As far as I know, Snapdragon 430 support Quick Charge 3.0. I bought a ROCK charger with Quick Charge 3.0, just waiting for it to arrive from Aliexpress, should work just fine.
Sephirothrx7 said:
I bought my Moto G5 in Brazil near the launch date, it did come with the 10 W charger (5V-2A, W = V x A, do the math). As far as I know, Snapdragon 430 support Quick Charge 3.0. I bought a ROCK charger with Quick Charge 3.0, just waiting for it to arrive from Aliexpress, should work just fine.
Click to expand...
Click to collapse
Well, I didn't know that this would result in 10W. Anyways, as far as I know the moto G5 doesn't support Turbo/Quick charge, despite using the Snapdragon 430. I say thay because none of the TurboPower chargers in Motorola's website cites the G5 as supported (only G5+/G5S), in addition, I read many reports in Lenovo's official forum repporting it doesn't support Quick/Turbo Charge, like here: https://forums.lenovo.com/t5/Moto-G...g-with-Qualcomm-quick-charge-3-0/td-p/3828209
In other words, a 15W charger is not supposed to provide great advantages over the regular charger that came with it.
Anyways, thanks for showing me a 5v-2a equals 10w, I googled and confirmed it.
freeZbies said:
Well, I didn't know that this would result in 10W. Anyways, as far as I know the moto G5 doesn't support Turbo/Quick charge, despite using the Snapdragon 430. I say thay because none of the TurboPower chargers in Motorola's website cites the G5 as supported (only G5+/G5S), in addition, I read many reports in Lenovo's official forum repporting it doesn't support Quick/Turbo Charge, like here: https://forums.lenovo.com/t5/Moto-G...g-with-Qualcomm-quick-charge-3-0/td-p/3828209
In other words, a 15W charger is not supposed to provide great advantages over the regular charger that came with it.
Anyways, thanks for showing me a 5v-2a equals 10w, I googled and confirmed it.
Click to expand...
Click to collapse
You are welcome.
To be honest I have been using the Quick Charger but can confirm if it's working or not. I usually just plug the phone before going to sleep, when I wake up it's already 100% . I will search if there's anything available to detect if it's using the quick charge or not.
Did it work?
I'm using my wife's charger from her G4+ and it seems not boost the charger at all. It takes the same time with my own charger. Normally, batteries got a regulator that protect the battery from being overpowered and, maybe, exploded. So, if it was setted to 2A max it won't work anyway. Also, the official charger detects, through USB interface, if the device support Boosted Charging before sending 3A. If you wanna save your money, my advice is don't buy it.
Moto G5 doesn't support Qualcomm 2.0 or 3.0 which charge at 9V or 12V. My original charger used to charge at 5.2V and up to 1.5A, but it doesn't anymore, now doesn't go over 5.0V. Very difficult to charge when powered on when normal charger only manages about 0.6A . Also have problem with portable battery packs, best option is to connect external battery when full, and it just about stops internal battery falling. Maybe the connector wearing out, have tried different cables....
mstombs said:
Moto G5 doesn't support Qualcomm 2.0 or 3.0 which charge at 9V or 12V. My original charger used to charge at 5.2V and up to 1.5A, but it doesn't anymore, now doesn't go over 5.0V. Very difficult to charge when powered on when normal charger only manages about 0.6A . Also have problem with portable battery packs, best option is to connect external battery when full, and it just about stops internal battery falling. Maybe the connector wearing out, have tried different cables....
Click to expand...
Click to collapse
Sometimes it can be as simple as a tiny piece of pocket lint/crud in the USB charging port. You can buy cans of compressed air to blow them out same as used on Camera lens or check with magnifying glass and then a toothpick with care to clean anything found out.
HTH
Blast from past on old phone! The usb port eventually failed completely, fortunately the little board is easy to replace, but the replacement board only lasted a few months. I still have the phone as a spare and charge the removable battery out of the phone.
mstombs said:
Blast from past on old phone! The usb port eventually failed completely, fortunately the little board is easy to replace, but the replacement board only lasted a few months. I still have the phone as a spare and charge the removable battery out of the phone.
Click to expand...
Click to collapse
Sorry about that
But glad you still have the phone
So the data port on my Moto G3 is failing (loose), so I ordered a replacement part and figured I would keep it as a backup phone and move on to the Moto G6 as my main phone. I need a multi-port wall and car charger as mine are very old (As in single 5V voltage at 1 amp per port max) and figured that would be easy, just pick them up on Amazon.............NOT. I spent an entire day trying to figure out what was compatible with the phone (voltages, currents, wattages, fast charging technology) and as far as I can tell there is nothing out there. This is not just Motorola, as other manufacturers have their own standards. This really needs to be standardized.
I then contacted Anker. I mean come on, they have got to know right?. Here was their reply yesterday:
"But so sorry that the Moto G6 uses the exclusive turbo charge technology, we cannot guarantee 100% that our QC charger (Moto Turbo-charging is a quick charge technology based on QC) could charge the device fastly. "
It is bad enough every time I buy a new phone everything changes and I have to buy new chargers, cases, cables, sim cards, SD cards, etc. I am not saying that is a bad thing, as these technology changes usually mean improvements in speed, usability, reliability, etc. I just don't want to buy all this new stuff and have chargers that won't work with other devices I might buy shortly or be obsolete in months instead of years.
I guess I have to hold off until all of this stabilizes and standardizes. Thanks to Lineage my obsolete Moto G3 (According to Motorola) still runs great and has the latest security updates. My only concern is that the battery will be the next to go.
Every USB C charger I have plugged into my G6 has been compatible with turbopower charging... have used 3, one that came with it, my nexus 5X charger, and a cheap charging dock I got on amazon...
Could someone tell me what the model # and output electrical values are (Volts / Amps / Watts) that are written on the stock charger for the Moto G6. Motorola sells two different wall chargers with different specs. The output values should be specified as V / A/ W for 5V, 9V, and 12V.
pjc123 said:
Could someone tell me what the model # and output electrical values are (Volts / Amps / Watts) that are written on the stock charger for the Moto G6. Motorola sells two different wall chargers with different specs. The output values should be specified as V / A/ W for 5V, 9V, and 12V.
Click to expand...
Click to collapse
The charger I have for my G6 is either model SC-22 or SPN5993A (it's hard for me to tell next to all of this Chinese writing). The output is either 5V, 9V, or 12V.
Thanks. I was considering getting the on sale Moto G6 64 bit version today as it was only $259, but it is only available in the Indigo color. I will wait until the regular price lowers and the whole charging thing gets resolved. I ordered a part to fix my Moto G3 in the meantime. I also have a Nexus 4 as a backup phone so i am good to go for a while.
I can check tomorrow to be sure, but I think it uses the 5V 3A charging standard. I have a USB meeter that I can plug into the charger at work and see what it does. I don't think it does the 9V or 12V fast charge.
You simply need a QC 2.0 or 3.0 charger. Easy day. Both will turbo charge the Motorola. Ive used dozens of different brands on a few different Motorolas and they all turbo charge.
shawndak said:
You simply need a QC 2.0 or 3.0 charger. Easy day. Both will turbo charge the Motorola. Ive used dozens of different brands on a few different Motorolas and they all turbo charge.
Click to expand...
Click to collapse
Thanks. I will get QC 3.0 chargers, unless if and when I decide to buy the phone, QC 4.0+ chargers are released and work with the Moto G6. I am probably going to wait for a non-Amazon 64GB RAM model to be released.
pjc123 said:
... I am probably going to wait for a non-Amazon 64GB RAM model to be released.
Click to expand...
Click to collapse
Especially if you are interested in unlocking the bootloader.
I too, just recently found that a 4/64 version of the regular G6 is available, but have only found the Amazon Prime version. I contacted Motorola and asked why this version is not available on their web site. So waiting to hear back.
32GB internal storage is just not enough, especially in the case of the X4, with the OS taking up 13GB.
pizza_pablo said:
Especially if you are interested in unlocking the bootloader.
I too, just recently found that a 4/64 version of the regular G6 is available, but have only found the Amazon Prime version. I contacted Motorola and asked why this version is not available on their web site. So waiting to hear back.
32GB internal storage is just not enough, especially in the case of the X4, with the OS taking up 13GB.
Click to expand...
Click to collapse
Yes , unlocking the bootloader is the main issue. Also, Lenovo is terrible with OS and security updates, both not timely and eventually not supporting the phone all together, so I would need the capability to install a ROM eventually, like what I did with my Moto G3.
Anker PowerCore+ 26800 with Qualcomm QuickCharge 3.0 (version that includes PowerPort+ 1 wall charger) QC 3.0 port (blue one on the right) charges Moto G6 in TurboPower charging mode, also the charger that comes with it works same way, both charge phone very quickly. Just like charger that came with the phone.
Using Anker USB C 3.0 braided and PVC cables.
I'm guessing any Qualcomm QC 3.0 -type charger will run in TurboPower mode with this phone.
I can't verify quick charge but I can verify that any phone charger supporting power delivery (type c "standard" for charging fast and not proprietary like quick charge) will definitely activate turbocharging.
Edit... After scouring the internet for a few minutes I'd just stick with power delivery chargers as it seems that quick charge chargers (qualcomms proprietary fast charging method) is a mixed bag of results as the G6 doesn't officially support quick charge while if you purchase a power delivery charger it'll just work.
We have the Moto G6, Nexus 6P (Huawei) and Moto Nexus 6 - the OEM Moto charger with the OEM cable obviously enabled the Turbo charging mode, the same charger does fast charging on the Nexus 6P as well as the old Nexus 6. Traded into Google my old Nexus 5X but kept the OEM USB-C fast charger, which works with all these 3 smartphones, I can't recall at the moment whether it's Turbo and/or Fast charging mode, as I left that at home and we are traveling on the road this weekend.
What I've noticed is that, sometimes, it will depend on the specific USB-C cable that I am using and/or possibly using one of the "certified" USB-C adapter plug (with the resistor) and an OEM/quality micro-USB charging cable with all the pins wired correctly.
On the road, I've been using an Anker 4-usb port charger that put out 2.4 amp per port at 5V (up to a max of 7.2 amp ... average of 1.8 amp) and it does charging these 3 devices fast, maybe not "turbo" mode. The speed is more than good and quick enough, won't take overnight hours to bring it up to 100%.
Moto G6 is stock OEM rom whereas N6P and Nexus 6 are custom roms.
the moto g6 play also support turbocharge it just doesnt come with the turbocharger block. i used my cousins block from his z2 force and everytime i connect it the phone says "turbo power connected" the moto g6 play is also not usb-c. the block that came with the phone only does as the phone says "rapidly charging" so yea its kinda weird lol
ninjakira said:
the moto g6 play also support turbocharge it just doesnt come with the turbocharger block. i used my cousins block from his z2 force and everytime i connect it the phone says "turbo power connected" the moto g6 play is also not usb-c. the block that came with the phone only does as the phone says "rapidly charging" so yea its kinda weird lol
Click to expand...
Click to collapse
Thanks. I'm actually considering grabbing a g6 play as a backup/work phone. I have a g6 with the turbocharger block. I'll probably have to grab a block once I test the g6 play... I bought that phone for my dad and he loves it... unlocked, of course.
It works with standard PD (5V, 9V) charger when I making a reply
Just to reaffirm, it works with a Power Delivery (PD) charger. QC is not the supported charging standard on the G6. So buy a charger that uses the PD standard.
https://www.amazon.com/gp/product/B077HFFLMS/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
https://www.amazon.com/gp/product/B01MA10GH9/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
https://www.amazon.com/gp/product/B07214QNQX/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
I have both these charger blocks and those Anker cables. I don't have exact numbers but I know they charge my G6+ and my girlfriends X4 very fast and my G6+ says Turbo Power when connecting the charger.
Doesn't look like I already commented, but the Moto G6 uses the 5V 3A fast charge method, went to about 2.3A at most, it doesn't go to the 9v. I used a USB C amp meter that also shows voltage and is capable of fast charging. I know this works because it activates the Power delivery for my Chromebook with USB C and goes to 15V.
In general, there's two considerations here.
1.) Turbocharge is a fork of the QuickCharge specification. Anything rated for QuickCharge should work with it to some extent.
2.) the USB signalling is important. since the G6 uses a type C connector and specification, it is not technically always using the same signaling wires as USB 2.0, 3.0 type A (the big flat connector we all know and love)
So, if you're wanting to make sure everything works as it should, and is as broadly compatible as possible, make sure that the charger you are using is rated as at least Quickcharge 3.0, and that the cable you're using is certified for USB 3.1 (or 3.1 gen 2 as it is confusingly called) a lot of the USB-A to USB-c cables you'll find out there are actually usb 3.0 (also called USB 3.1 gen 1, ugh this naming convention), or even USB 2.0, cables with a type C connector slapped on them if you're getting some cheap chinese junk off amazon or ebay. Also remember that USB 3.1 cables are length sensetive, and should not be over 2 meteres (about 6 ft) long unless you are using what is called an 'active cable.' These have microchips in their connectors and are generally more expensive.