Related
I lost my wall charger that came with my HP touchpad. The round plug thingie is what I'm looking for. Searching on Amazon brings up a number of items, for example:
http://www.amazon.com/HP-North-American-Charger-TouchPad/dp/B0055QYJJM/ref=dp_cp_ob_e_title_3
However, is there an alternative that works? I was able to use the Evo cable rather than the original HP sync/charge cable that came with the wall charger, but is there an alternative wall plug that works as well? Paying almost $28 for a charging cable seems a bit ridiculous.
Any help and advice would be most appreciated.
[[FOUND MY ANSWER]]
I found that Walmart was having a sale on the North American charger with the barrel wall connector for $11.99 and Meritline was having a sale for 6' long USB to micro-usb cables (pair for $4.99 no tax/shipping).
The listing on the Meritline page says that the cables are compatible with the Evo.
Given that the cable that comes with the HP barrel charger is pretty much monkey spit and fails within a month, I found a solution that works for less than $20.
Links are below:
Walmart HP Touchpad charger
http://www.walmart.com/ip/HP-TouchPad-Accessory-Travel-AC-Wall-Adapter-Charger/16641536
Meritline Cables (use this code MLCK222YNL1 for discount (cannot guarantee how long this code is good for, drops the price for a twin pack of the 6' cables from $10.99 to $4.99)
http://www.meritline.com/showproduc...e=6-feet-high-speed-micro-hdmi-cable-ethernet
Pretty much any USB charger will work, but most give a notification on the Touchpad screen indicating that they may not be charging. This is because the official charger is at the high end of both voltage and current capability. I charge from laptop, desktop and a variety of Blackberry chargers with no issue, but the available current will determine how long it takes to charge and whether it charges much while the screen is on. Go for a USB charger that gives you 2 Amps and you should be fine.
dmarchant said:
Pretty much any USB charger will work, but most give a notification on the Touchpad screen indicating that they may not be charging. This is because the official charger is at the high end of both voltage and current capability. I charge from laptop, desktop and a variety of Blackberry chargers with no issue, but the available current will determine how long it takes to charge and whether it charges much while the screen is on. Go for a USB charger that gives you 2 Amps and you should be fine.
Click to expand...
Click to collapse
Thank you for the advice. To be more specific, can you recommend any alternative charging cables/wall charger units specifically?
Any brand name USB charger that gives off 2 amps should be fine. I tend to stay away from really cheap generic chargers. Any microUSB cable should be fine even a generic one if it has decent reviews. I worry about generic chargers since a poorly regulated one could send a voltage too high, but generic cables should be fine.
The chargers I am currently using, as well as the one that came with the TP, are the one that came with a Blackberry Playbook and the one from my HTC Desire HD.
The Blackberry charger gives an error on the screen that it may not charge the TP, but as it gives 2 amps, charges in pretty much the same time as the official unit.
The HTC again gives the warning and takes about twice as long to charge.
what about the nook color charger i know it higher amps might work as well
cesar2010 said:
what about the nook color charger i know it higher amps might work as well
Click to expand...
Click to collapse
I just tested the TP with a charger for the NC, and unfortunately, it still gives the same "may not charge" warning...
There is NO after market charger that will charge at full rate like the HP barrel charger!
At best they will trickle charge at a much lower rate and take considerably longer to charge.
The TP relies on precise signaling which it will only get from the OEM item or specially modded after market units or cables.
Do a google for further info ie webosnation.com forums.
I think your looking for a 5.1v charger, aka rapid charger. This is used by the iPad, and some android phones like the Motorola droid 3, razr and htc rezound.
I could be wrong though,I haven't gotten my touchpad yet.but I do own all said device above (except the razr) and they all use the faster charging technology.
Sent from my rezound.
Izeltokatl said:
I think your looking for a 5.1v charger, aka rapid charger. This is used by the iPad, and some android phones like the Motorola droid 3, razr and htc rezound.
I could be wrong though,I haven't gotten my touchpad yet.but I do own all said device above (except the razr) and they all use the faster charging technology.
Sent from my rezound.
Click to expand...
Click to collapse
They will not work at full rate!
No one else uses 5.2 volts
Sent from my Samsung Galaxy S2
Don't believe all the hype about using ONLY the HP charger, there are many that do the job perfectly well. Too many people make these authoritarian statements and all they do is cause FUD.
At my office, I use the AC charger from my last Samsung phone (mythic) and it works IDENTICALLY to the OEM one. I have also used a Moto and and LG with NO PROBLEMS. I have no issues getting to fully charged in little time.
At home, my OEM cable is plugged into a high-power USB port (2.1A, I believe) and it has no problem charging from near zero to full as well. Front or top-mounted USB ports tend to be 500mA or less, but the rear ones (coming directly off the motherboard) tend to have a higher supply. I also use a non-HP USB cable occasionally and it works fine.
(I got my TP during the original fire-sale and have been charging it these ways ever since with ZERO ISSUES.)
R1ptide said:
No one else uses 5.2 volts
Sent from my Samsung Galaxy S2
Click to expand...
Click to collapse
The small voltage difference is marginal and isn't going to matter, the internal hardware should be able to tolerate a few tenths of a volt difference. In fact, I tested my Motorola charger rated at 5.1v and the Touchpad charger rated at 5.2v on a multimeter. The Motorola charger was outputting 5.20v and the Touchpad charger 5.16v. Granted this is at no load, but switching transformers are regulated so they should supply rated voltage at any current draw equal to or less than rated. Also depending on how well the voltage is regulated there may still be a slight AC ripple that the device has to deal with.
Does anyone know the time difference between using the TP charger and a standard droid/blackberry charger? Also curious if the charges last the same. I know theoretically they should since the battery is full either way, but electricals can be tricksiy..
sirclesam said:
Does anyone know the time difference between using the TP charger and a standard droid/blackberry charger? Also curious if the charges last the same. I know theoretically they should since the battery is full either way, but electricals can be tricksiy..
Click to expand...
Click to collapse
Its all down to the charge rate that the TP is able to draw.
2A which is theoretically possible from TP AC barrel charger would charge the 6A+ battery of the TP from flat to full in approximately 6.5 hours.
If the BB charger were able to have 500mA drawn by the TP then it would fully charge in approximately 26 hours.
The charges would be no different.
To convert any regular USB charger into a TouchPad charger you need to add 2 resistors as per the diagram attached.
The presence of the resistors will trigger the TouchPad to draw the full 2A from the charger rather than the trickle charge it does when they are not there.
Please do not modify a cheap charger that is only rated for 500mA as you will most likely overheat it and it could present a fire risk.
stuart_f said:
To convert any regular USB charger into a TouchPad charger you need to add 2 resistors as per the diagram attached.
The presence of the resistors will trigger the TouchPad to draw the full 2A from the charger rather than the trickle charge it does when they are not there.
Please do not modify a cheap charger that is only rated for 500mA as you will most likely overheat it and it could present a fire risk.
Click to expand...
Click to collapse
Just pointing out that you need to start with a charger that is rated at least 2Ah to start with.
You can't turn a low rated one into a high rated one.
pa49 said:
Just pointing out that you need to start with a charger that is rated at least 2Ah to start with.
You can't turn a low rated one into a high rated one.
Click to expand...
Click to collapse
oh, for the love of gods. REALLY? I was just asking for a replacement cable. I don't want to reinvent the charging paradigm. I just need a simple recommendation for a cable. If a thread could be highjacked any further I don't know how it could be.
I appreciate all your "advice" but seriously, this is NOT what I was asking.
Anyone know if I can get a similar cable in the UK? Kind of lost my TP cable, and I miss the flexibility the long cable gave me, it was so much easier to use on charge!
well i know that my tbolt cable works. i have to use the tp adapter though. my tbolt adapter makes the touchpad say that the charger is incompatible.
Hi
The S6 comes with what they call an adaptive fast charger. Because I am not too happy with the battery life on my S6, I am looking for an adaptive fast charger in an external battery pack. There are lots of portable chargers on Amazon and a lot of them say fast charging but I am not sure whether that is the same thing or they just say fast charging because they are around 2A. Is there something similar to what the phone comes with available in an external battery pack charger?
TIA
I've only seen 2 batteries that support the Samsung fast charge. Officially it needs to be Qualcomm quick charge 2.0 compatible. There is one from incipio that is $80 or so and one from Aukey for $30. The Aukey is out of stock right now on Amazon and I'm waiting to get one as well.
Also if you are looking for a multiport charger or cigarette lighter adapter Choetech make some that work really well and are QC 2.0.
-Mark
ely105 said:
I've only seen 2 batteries that support the Samsung fast charge. Officially it needs to be Qualcomm quick charge 2.0 compatible. There is one from incipio that is $80 or so and one from Aukey for $30. The Aukey is out of stock right now on Amazon and I'm waiting to get one as well.
Also if you are looking for a multiport charger or cigarette lighter adapter Choetech make some that work really well and are QC 2.0.
-Mark
Click to expand...
Click to collapse
Thanks. I'll take a look at the two you mention.
I also looker before at the Choetech cut I was rather put off by at least three people claiming it caused a fire!
For my car charger, I use my 2015 KIA Sedona's charger adapter that came with the purchase, and it charges just as fast as the charger that came with the S6.
However, the adapter does get a little hot, but not bad. Really surprised at how fast it does charge.
Berlinetta said:
car charger
Click to expand...
Click to collapse
for what it is worth, aukey also sells a car charger for ~15 or 16 dollars on amazon
link
I have many chargers, but this one seems to be a winner for multiple ports with the added quick charge 2.0 port.
http://www.amazon.com/Qualcomm-Cert...mer-Included/dp/B00ZF7XLJU/ref=cm_rdp_product
I've had some more time reviewing this charger since I use it on a daily basis in my car. My original review is still true and can be found below. I've added a couple images of the product to show the quality of the finish as well as a size comparison between a couple other multi-port chargers I have. While this charger is the largest of my stash, it also provides the most charging ports while incorporating a quick charge 2.0 outlet. The size is a double edged sword in my opinion. Many 12v outlets are recessed, so the longer adapter of the Tronsmart charger can be quite beneficial. I know it would help in my Toyota Camry, but not so important in my Honda Odyssey. Due to the longer adapter size, I'm concerned I will one day drop something on it and damage my 12v outlet.
Anyways, on to the review.
Pros:
+4 USB charging ports (1 QuickCharge 2.0 + 3 auto detect 2.4Amp)
+Slim simple design
+No bright annoying LED
Cons:
-none to report (possibly the size)
The Tronsmart 4 port car charger is simply amazing. I have tested it thoroughly over the past week and have decided to use it as my primary car charger! I own many many car chargers, but there are very few that provide 4 powerful charging ports in such a compact design. This charger is rated at 54 watts, but all you really need to know is that it will charge all of your devices with ease. The primary advantage this car charger offers is the 4 port design with 1 being Qualcomm Quick Charger 2.0 certified. This means it is designed for long term use as new phones and products are just now being developed to work with this technology. The remaining 3 ports are not to be forgotten either, rated at 2.4 Amps each. They are also smart charging ports (Tronsmart calls them Volt IQ ports) which basically means the port will automatically sense and charge the connected device at its maximum rate.
I tested this charger using a variety of devices (Samsung Galaxy S6, S5, iPad, iPhone 6, and battery banks) and they all accepted the charge immediately and at similar charging currents as I've seen on with other chargers. My Galaxy S6 registers this charger as fast charging when connected to the Quick Charger 2.0 (blue) port. I used a Portapow V2 USB current meter to verify the charging rates while all four ports were in use. I alternated devices between the ports and the results are consistent with advertised rates. Through my experience testing many chargers, I've come to learn that the charging limitation comes down to either the charger, the USB cable, or the device itself. Rest assured that this car charger is not the limiting factor when you are maximizing your charging speeds.
I received this product at no charge in exchange for an honest review. I am using this charger on a daily basis as my primary charger, so I will update if I notice anything out of the ordinary. Please also let me know if you have any specific questions and I will do my best to answer them.
I agree. I also received this charger from Tronsmart, and it's been great!.
(Mine was sent for free, in exchange for my writing an honest review. [http://www.amazon.com/review/R9A6YSQ37WQZE] And, if I didn't like it, I wouldn't hesitate to say so. After all, it's a $20.00 item. Definitely not worth being a shill for that. Fortunately, I like it very much.)
The charger seems to be one of a number of quality items being manufactured in China, and repackaged under the Tronsmart, Anker, and Aukey brand. (Most of those items were purchased, including others from Tronsmart). But, this isn't a bad thing, as I've used many accessories from each over the past couple of years, and they've delivered good performance at a good price.
My setup is a Nexus 6, while my wife uses (my old) Nexus 5. We both drive Honda CR-Vs. My N6 charges quickly using the Qualcomm QC 2.0 port, although it also charges well with the Volt IQ "intelligent" ports as well. My wife's N5 charges quickly, too, albeit without the QC 2.0.
What I like about this charger is that it's still relatively small, despite having the 4 ports. This is VERY HANDY when my kids are in the car for a long drive, and their own tablets are sucking down battery life. When used with a longer USB cable from Tronsmart (or, Anker, which I've also purchased), they can charge from the back seat.
I bought a single-port Tronsmart QC 2.0 car charger, as well as a two-port Aukey (one port QC 2.0, one a "smart" charging port), and though they all work well, this is the one I have stuck with. Dependable, good quality, and very reasonably priced. If you have more than two devices to charge in the car, you can't really do much better than this at this price-point.
Nice car charger, I have bought a note 5. And also find that tronsmart has the dual 2.0 ports car charger. Both of the ports have QC 2.0. I will get it when it is available at amazon
haic said:
Nice car charger, I have bought a note 5. And also find that tronsmart has the dual 2.0 ports car charger. Both of the ports have QC 2.0. I will get it when it is available at amazon
Click to expand...
Click to collapse
The model you are talking already list on amazon, check it here:
http://www.amazon.com/Tronsmart-Qua...TF8&qid=1441770789&sr=8-12&keywords=tronsmart
it's great this model comes with two micro usb cables.
I bought this charger and am mostly happy with it. It does charge at fast charger rates most of the time. Sometimes I have to plug it in a second or third time before the phone recognizes it as a fast charger. The problem I have with it, is it won't stay in the car outlet. It is so skinny, and the side spring contacts cause it to continuously eject from my jeep power outlet. It will pop out just far enough that it will stop charging with out noticing it. Might have to rig it with tape or something.
Sent from my iPad using Tapatalk HD
I bought the Tronsmart 2-port Quickcharge 2.0 Car Charger... Holy good god, Its become essential in my car for charging my S6 using GPS/Music Streaming. Never had any issues with my S6 or girlfriends Note 5.
So shortly after receiving my Nexus 6P I began hunting for a car charger that could supply 3 Amps if needed to my device...you know....in case of zombie apocalypse and the power grid goes down..I could still charge my phone :silly:
I found there were very few available. The first I saw was back ordered for weeks. Then I came across the Tronsmart charger. It was available on Amazon with Prime for like $22. The downside was it did not include a USB "C" cable, but now I see they have an updated version that has the USB "C" cable attached for a bit less. That'll teach me to rush out an buy something!
This is not totally a "con" since I am sure we have all been there where the cord attached to our car chargers breaks over time. So you would have the ability here to simply replace your 3 Amp USB C cable if that happened.
Testing: It seems the Nexus 6P is a little finicky and must be reallllly hungry (low on battery) for the charge current to get near 3 Amps. I drained my 6P down to 44% and tested the current on the manufacturer supplied charger in the house. It peaked at 2.85 Amps. I then took my phone out to my truck and threw it on this Tronsmart car charger. It peaked at 2.80 Amps. I am confident that this product works as advertised.
I also tested the type A port and it had no problem supplying 2.4 Amps to the 6P and also to my work phone LG G3.
This is a solid, rugged device. I am impressed enough to order a house charger from them as a back up for the one supplied with the 6P. It is designed for the 6P as well and also contains both A and C ports on it.
KennyG123 said:
So shortly after receiving my Nexus 6P I began hunting for a car charger that could supply 3 Amps if needed to my device...you know....in case of zombie apocalypse and the power grid goes down..I could still charge my phone :silly:
I found there were very few available. The first I saw was back ordered for weeks. Then I came across the Tronsmart charger. It was available on Amazon with Prime for like $22. The downside was it did not include a USB "C" cable, but now I see they have an updated version that has the USB "C" cable attached for a bit less. That'll teach me to rush out an buy something!
This is not totally a "con" since I am sure we have all been there where the cord attached to our car chargers breaks over time. So you would have the ability here to simply replace your 3 Amp USB C cable if that happened.
Testing: It seems the Nexus 6P is a little finicky and must be reallllly hungry (low on battery) for the charge current to get near 3 Amps. I drained my 6P down to 44% and tested the current on the manufacturer supplied charger in the house. It peaked at 2.85 Amps. I then took my phone out to my truck and threw it on this Tronsmart car charger. It peaked at 2.80 Amps. I am confident that this product works as advertised.
I also tested the type A port and it had no problem supplying 2.4 Amps to the 6P and also to my work phone LG G3.
This is a solid, rugged device. I am impressed enough to order a house charger from them as a back up for the one supplied with the 6P. It is designed for the 6P as well and also contains both A and C ports on it.
Click to expand...
Click to collapse
I have a ton of Tronsmart products, and I use the car charger daily without having any issues I wouldn't trust Ampere to give you accurate charging stats as far as the current goes, but charging time can be measured. The only true way to measure the current is with a multimeter and there aren't any C-C ones yet that work without a computer.
I have their dual port wall charger (both the A,C and A,A ones) and they're great! You can see my review of the chargers via my signature; if you have any questions about their products let me know. I speak with Tronsmart on occasion and I could answer any questions you might have.
Pilz said:
I have a ton of Tronsmart products, and I use the car charger daily without having any issues I wouldn't trust Ampere to give you accurate charging stats as far as the current goes, but charging time can be measured. The only true way to measure the current is with a multimeter and there aren't any C-C ones yet that work without a computer.
I have their dual port wall charger (both the A,C and A,A ones) and they're great! You can see my review of the chargers via my signature; if you have any questions about their products let me know. I speak with Tronsmart on occasion and I could answer any questions you might have.
Click to expand...
Click to collapse
Yeah, I tried Ampere and GSAM Battery monitor and both showed the same. I have a USB inline ammeter for the A port. I am very happy with the car charger and the quick charge capabilities.
KennyG123 said:
Yeah, I tried Ampere and GSAM Battery monitor and both showed the same. I have a USB inline ammeter for the A port. I am very happy with the car charger and the quick charge capabilities.
Click to expand...
Click to collapse
I've been trying to find a more accurate way to measure the current being drawn from C-C chargers, but I haven't found one just yet. I was talking to a friend about making a C-C multimeter from a Raspberry Pi, or running a parallel wire from the C-C cable to measure current from. If we find a good way to measure it I will post about it, but so far I'm happy with mine too.
Hi all, just ordered a Pixel XL to replace my 4 core failing Nexus 6P. I have no idea what kind of charger is coming with it, and even if its OEM, I'd like to have 2. I have read many threads about the non PD compliant chargers not providing rapid charge, and am wondering what the consensus is on using a Nintendo Switch charger? My local Best buy has the official Google Pixel XL charger for $34.99, and the official Switch AC adapter is $10 less. Has anyone tried this, or have any thoughts on using this? With all the stories about nonPD if I have to, I'll just get the official google one, but was wondering if this was an option.
Thank you!
The Pixel XL comes with a USB-C charger and a USB-A to USB-C cable, so any standard USB-A rapid charger will work.
Weudel said:
The Pixel XL comes with a USB-C charger and a USB-A to USB-C cable, so any standard USB-A rapid charger will work.
Click to expand...
Click to collapse
Thanks for the reply. I was under the impression from this thread: https://forum.xda-developers.com/pixel-xl/accessories/usb-c-pd-chargers-google-pixel-xl-t3474205
that only certain chargers provide fast charge. I did not buy the phone new so I don't know if it comes with the standard google charger or not.
belkin type c rapid charger should be available for cheap at your local walmart/target/best buy. pretty good quality cable for the price.
My switch charger ended up damaging the port after continued use. I recommend saving up for the official one
Tried many chargers, only the original Google ones seem to charge at rapid charging speed. Oh Belkin car charger ones does as well.
I tried a NS charger (HAC-002 USZ) on a Pixel XL a day ago and it worked fine and did rapid charging.
Mine didn't come with a charger (bought off eBay). I bought a so called fast charger (can't remember brand but it looked legit Qualcomm fast charge capable) and it says it's fast charging but it takes about twice as long to charge as my old OnePlus 5 did.