Hi,
I got a HTC ONE SV with the following issue.
- When it boots it got stuck into the White HTC screen.. Computer (Win 8.1) recognizes it as unknown device
- When I try the Volume down + Power - it boots in to Fastboot mode
- Computer recognizes via FastBoot.
This is the screen I got. I tried to click bootloader, it keeps going back to the same htc screen. ?
Any help?
*****Locked*****
K2_UL PVT SHIP S-ON RL
HBOOT-2.00.000
eMMC-boot
Mar 14 2013, 22:10:43:-1
--------------
When I issue fastboot getvar all, I got the following.
C:\Android\HTCOneSV>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.00.0000
(bootloader) version-baseband: N/A
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.11.401.1
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: XXXXXXXXXX
(bootloader) imei: xxxxxxxxxxxxxxxx
(bootloader) product: k2_ul
(bootloader) platform: HBOOT-8930
(bootloader) modelid: PL8010000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3752mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
getvar:all FAILED (status read failed (Too many links))
finished. total time: 0.142s
And what happened before, that it does not boot anymore?
Your phone is still S-on and locked, you maybe might try warranty service first, before you'll do anything else.
old.splatterhand said:
And what happened before, that it does not boot anymore?
Your phone is still S-on and locked, you maybe might try warranty service first, before you'll do anything else.
Click to expand...
Click to collapse
It's out of warranty. The screen was broken and was replaced and this started happening
Ok, i understand. And i can remember we had this case with replaced screen before here in the forum.
At the end we tried all things which are usually working to get the phone back working, but all failed.
I personally think, this is because the replacement screen is not supported by the firmware/drivers.
I have no proof for that, but i really think this is the case, here for you too.
Looks like an expensive paperweight
Related
Hello.
First of all, I am new to Android development. I like to play around with stuff and a friend of mine who is a total noob asked if I could take a look at his HTC One SV. He said that the phone switched off during software update and now the phone is stuck in bootloop.
I spent 2 whole days reading up on what can be done and trying to fix it but right now I am fed up and would appreciate if anyone could help me in any way, especially a walktrough via PMs.
I tried to flash TWRP recovery via fastboot. It flashes, it goes on to the red warning message and goes back to bootloop after a minute. I think I tried every possible TWRP version. I cleared the cache before and after flashing. I flashed multiple times, I ereased cache multiple times with each image.
I am unable to go into recovery. What can I do about it? What am I doing wrong? What can I try? The guy that gave me the phone already made peace with the idea that it will never work again so I am willing to try anything. I would like to start from scratch as I do not know if anyone played with it before me.
*** TAMPERED ***
*** UNLOCKED ***
K2_UL PVT SHIP S-ON RL
HBOTT-2.00.0000
RADIO-1.15.40a.00.07
OpenDSP-v9.2.0268.1214
eMMC-boot
Apr 12 2013, 01:55:41:-1
>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.00.0000
(bootloader) version-baseband: 1.15.40a.00.07
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.15.118.2
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: xxx
(bootloader) imei: xxx
(bootloader) product: k2_ul
(bootloader) platform: HBOOT-8930
(bootloader) modelid: PL8010000
(bootloader) cidnum: T-MOB009
(bootloader) battery-status: low
(bootloader) battery-voltage: 3453mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
getvar:all FAILED (status read failed (Too many links))
finished. total time: 0.077s
You can't restore your boot.img through TWRP because you are S-On. Would require Dumlock to do this.
You need to rename boot.emmc.win to boot.img and flash it via fastboot after restoring your device using a twrp backup.
Same concept as flashing a Rom.
Sent from my C525c using Tapatalk
Hi.
Recent I downloaded a custom rom running android revolution 71.0 hd, my phone is rooted and I am running twrp 2.7. I choose to go back to original rom and restore everything my phone is also relocked tampered. I somehow locked it and again relocked and wiped everything, I ran this http://forum.xda-developers.com/showthread.php?t=2626050 rom and installed it, a while later I restart my phone and get "system proccess error" wait or click ok to shut down so the rom was not working. Somehow I am now stuck on the fastboot and cannot do a ****. Tried so hard installing like over 11 different twrp versions and no one of them seems working, only 1 worked from t-mobile, it went in and then I could not move anything, just stuck freez. I really want to do RUU recovery but my phone is S-on and I don't know if you guys know if it works to do a RUU even if the phone is s-on, I can lock the bootloader or keep it like now unlocked that works so far but cannot do anything else like install custom rom or anything else. I will put down my phone specifications down below and also typed "fastboot getvar all" command so you will see all info I can put down and which ruu version do I need and how do I do to install or fix this pls help me guys!!!!
fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4A.21.3263.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: SH36TW902758
(bootloader) imei: 357864056203233
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__Y13
(bootloader) battery-status: good
(bootloader) battery-voltage: 4289mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-bb768ae1
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
and when I look on my phone (fastboot I see)
M7_UL PVT SHIP S-ON RH
HBOOT 1.55.0000
RADIO 4A.21.3263.04
etc etc
pls help me guys!!!, mike:crying::crying::crying::crying:
Give it to a phone service , they will repair .
Hi all!
I tried to unlock my htc one sv via htcdev, i finished all the steps but when it reboots it's still locked.
Also, i can't get past the bootloader...that's the real problem. My phone once rebooted and now i can't get past bootloader.
I have already searched in this forum but didn't find any solution.
fastboot get var all output:
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.00.0000
(bootloader) version-baseband: 1.18.40a.00.05
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.11.401.1
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: SH312TP04176
(bootloader) imei: 352803055051545
(bootloader) product: k2_ul
(bootloader) platform: HBOOT-8930
(bootloader) modelid: PL8010000
(bootloader) cidnum: HTC__203
(bootloader) battery-status: good
(bootloader) battery-voltage: 3695mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
getvar:all FAILED (status read failed (Value too large for defined data type))
finished. total time: 5.063s
It's tampered.
THanks in advance!!
Very same with my phone!! Please help. Warranty period just ran out, so I'm pretty stuck.
Greetings
Is there any way to flash the One SV from outside, so via USB. Like an external hard drive. (One mentioned it is impossible. But I can't imagine that it was completely impossible, maybe there is a smart tool..... That's how I think HTC developers repair phones, if everything else fails).
Because I don't see any solution to go past the locked bootloader screen.
Thanks in advance
Ok so my HTC One S went to boot loop during Friday night. I some how managed to get it back to factory setting even though I don't know how because every time I tried to go to factory reset from bootloader phone just went back to bootloop. Well once I got to factory state I of course had lost all my photos which I wanted to recover. So I used this guide http://forum.xda-developers.com/showthread.php?t=1583427 to root my phone in order to recover photos. Well I could not recover photos and my phone went back to bootloop.
At the moment I can't access recovery or factory reset. When I try to access them phone gets stuck on the HTC screen with red text "This build is for development...". I can access bootloader and fastboot/fastboot usb but don't know how to proceed. Any advises?
Phone info:
VLE PUT SHIP S-ON RL
HBOOT-2.15.0000
RADIO-1.11.50.05.28
OpenSDP-v31.1.0.45.0815
eMMC-boot
Dec 14 2012, 17:10:75:-1
fastboot getvar all:
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.15.0000
(bootloader) version-baseband: 1.11.50.05.28
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.16.401.10
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT23SW404294
(bootloader) imei: 359901041149242
(bootloader) product: vle
(bootloader) platform: HBOOT-8960
(bootloader) modelid: PJ4010000
(bootloader) cidnum: HTC__Y13
(bootloader) battery-status: good
(bootloader) battery-voltage: 3721mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-64bedd38
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
fastboot oem readcid:
(bootloader) cid: HTC__Y13
Phone is both from Finland and I think it is C3 variant but not sure because I can't access settings. Now I am not anymore interested in recovering photos. I just want to get the phone working again. All advises are warmly welcomed.
-Gulthal
put the phone on fast boot mode and run this RUU http://androidruu.com/download.php?...c6c7501d48f34630cc1dfe55665b67ecf9b8869177334 http://androidruu.com/getdownload.p...28_10.27.50.08L_release_301814_signed_2_4.exe
JavierG123 said:
put the phone on fast boot mode and run this RUU
Click to expand...
Click to collapse
Thank you for the info, but when I relocked my boot loader with
Code:
fastboot oem lock
and tried to run that RUU I get the following error from installshield wizard
Code:
Error Code: -5001 : 0x80070002
Error Information:
>SetupNew\setup.cpp (142)
PAPP:
PVENDOR:
PGUID:
$
@Windows 7 / Server 2008 R2 Service Pack 1 (7601)
IE Version: 9.11.9600.18097
Running it as a admin didn't help.
-Gulthal
Really I don't. Know men. I'm sorry
Hello
Can somebody advice any help?
The phone current system on HTC One SV JB4.1.2 doesnt work prroperly,
- WiFi connection drops out and the phone has been a bit gittery.
the message: 'Process System Isn't Responding' Do You Want to Close It?
- It then just loops trying to boot.
- I have lost sound and mobile connection to provider.
1) OK, Ive unlocked the phone with Moonshine, S-off, superCID, TWRP 2.8.5 flashed. DONE.
2) Than Ive tried Venom Viper 1.5.0 with result - stuck of the white/green logo. No solution, no answer.
3) Than Ive tried k2ul_JB_2.14.401.6_stock_odexed_03_06_13.zip from probably old.splatterhand
- no stuck of logo at start, when Ive tried to unlock the screen, than white screen with green HTC word appears.
I need to bring this phone back to life. Its my Mothers phone. She likes it
Can somebody advice me the right ROM or RUU and installation process for this model to bring this mobile back to the life?
Thank You!
*******************************************
HTC One SV K2_UL Europe.
- unlocked, S-off, superCID, moonshine
- HBOOT - 2.00.4444
- RADIO: 1.14.40.00.01_2
- OpenDSF: v9.2.0268.1214
- Android JB: 4.1.2
- TWRP 2.8.5 for K2_UL
C:\adb>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.00.4444
(bootloader) version-baseband: 1.14.40a.00.01_2
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: HT311TP07273
(bootloader) imei: 352803050532895
(bootloader) product: k2_ul
(bootloader) platform: HBOOT-8930
(bootloader) modelid: PL8010000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 3864mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
getvar:all FAILED (status read failed (Too many links))
In my opinion, you should use the original RUU.exe to have the installer check if it is working properly with the eMMC.
p.s.
Delete, IMEI and S/N, because it may be useful to someone.
Can you send me a TWRP file for this phone? all the links on xda are dead