weeks ago I decided I wanted to use my xbox controller on my xoom. Trying to do so, I found it didn't have the keylayout. So I rooted the Xoom and downloaded the keylayout. I finally got it to work, but I have one last problem. The b button is set to go back. So when I map the keys in one of my games, it goes back when I hit the b button so I can't map it. Any ideas on how to fix this? Please keep in mind I am not too technical.....
Related
hey there,
I installed the vegan build beta 3 on my brand new gtab, but now I'm unable to turn on the usb everytime that I connect the gtab to my computer.
If anyone could help that would be great.
p.s. I ran into a bootloop and tried to use dcom's instructions (didn't work) maybe I did it wrong, what did work like a charm was partitioning 2048/256..
[EDIT]- now i see that you have to go into notifications and then turn it on... sorry, still new to android
No worries - glad you got through this issue. We were all new to Android once (and, in my case, that was only a few months ago).
Today, I finally managed to fix my Galaxy S GT-i9000 after bricking it last week. When it was restored I got android 2.2 and before this I had 2.3.6.
I restored it using Unbrickable resurruractor
And Heimdall One click
I restored to AT&T world phone firmware while I used to have the stock european dutch firmware
I'd like to address some issues I have with it. I have no doubt some of them are just some stupidities of android 2.2, but i'd still like them to be resolved as quikly as posible.
Tomorrow I wil try to update to 2.3.6
In the meantime i hope that somebody could help me with these issues.
Here's the list:
1.Sound isn't working. This includes games, music, ringtones, keypresses .ect (this one really irritates me)
2.I can't connect via USB. Whenever I insert the USB cable into my phone, it connects, to the PC for 2 Seconds, then shuts off and does nothing until I take
The USB cable out. I wanted to Get my original firmware back using Odin, but because of it, I can't do this.
And because of this i also can't recharge my phone
3. The back button (arrow on the right) functions as the home button (Black/White middle button) and the home button does nothing
4. The accelorometer is off, I tried recalibrating it, but that doesn't help.
5 I can't acces the recovery menu or download mode in any way
I hope that somebody can answer my questions or post a solution to my problem.
But because my phone doesn't charge it's just a race against the clock. I don't have acces to another Galaxy S so i can't use another battery.
Sent from my SAMSUNG-SGH-I897 which is in fact a GT-i9000
Re: It's driving me crazy!!!
Bump!
Hello Everyone,
First time poster, sorry if its in the wrong section.
I was wondering I live in Australia, and won a google TV (NSz-GS7) and which to get Netflix installed onto it, or possibly Hulu Plus.
I have set my DNS according to the TUNLR website, but still no luck. I have also created a second email with the location set to US but it still wont work with my device.
Can anyone suggest something?
Thanks
you need flash to US release Firmware
you need to flash the U.S. firmware version
1. You need to download , rename it to update.zip and then put update.zip onto a USB stick and connect to GTV
note: i cant post external links because i have less than 10 posts, i can give you via inbox
2.Then, you need to enter in recovery mode:
RECOVERY MODE (credits to gtvhackers guys):
Unplug power from the NSZ-GS7
Press and hold the connect button and plug the unit in.
Continue to hold down the connect button for 5 seconds after plugging the unit in, then release the connect button.
Wait a couple of seconds and the screen will show the recovery menu.
You can use a USB keyboard to navigate through the menu or you can navigate using the connect button (Short press navigates down while a long press selects).
Click to expand...
Click to collapse
3.Then you go to Software update via USB update (update.zip) and select update.zip onto USB stick.
If you want back to your correct firmware region you will need first look if anyone can catch the update link from OTA
Honestly, I think Netflix is the way to go. Ive had Hulu plus and it really sucks for the price. They never have the good shows, and if they do its normally only 1 season. And the movie selection is a Joke.
Netflix? Ive caught up on just about every show I have ever wanted to watch, as well as new ones I didnt know were out there thanks to the suggestions. Plus the movie selection is pretty spot on. Its no PirateBay, but they get the new ones out fairly fast, as well as having a ton of the classics.
As far as the TV, ive heard nothing really good or bad as far as google TVs. The only thing i can think of is maybe your firmware is not set up for a US account. try like the guy above stated, and if that doesnt work, you can always sell it and get a sony VISIO. good luck mate.
richi101001 said:
Hello Everyone,
First time poster, sorry if its in the wrong section.
I was wondering I live in Australia, and won a google TV (NSz-GS7) and which to get Netflix installed onto it, or possibly Hulu Plus.
I have set my DNS according to the TUNLR website, but still no luck. I have also created a second email with the location set to US but it still wont work with my device.
Can anyone suggest something?
Thanks
Click to expand...
Click to collapse
Did you manage to flash the US firmware on to the Aussie box?
Ok, so back last summer I was playing pokemon GO on my computer with Nox. Then one day they blocked the app from working so I went back to the little bit of playing I can do WAY out in the country with no stops and very few pokemon. Well its summer again and the kids are home and the wife is home and all are BEGGING me to get this working on the computer again. I read all the posts I can try all over the web. Tried Nox, no go, tried bluestacks 2, no go and some other app that was recommended without any luck. Can someone please help me with this I'm at the end of my rope...
Messed up thing is I'm a cash player... If I could play.
Hi,
I'm new to the forum, and I have searched for an answer but have not found anything.
Hopefully it's a no-brainer for u experts out here.
I'm very tempted to try an update available for MTCD_MX - later than my 1.97b.
I have 5.1.1 MTCD_MX built into my car, and it works great with the original buttons of the dashborad & steering Wheel etc.
Anyhow, at the moment I have no possibility to change the key-mapping in my unit (nothing happen when I open the Key-mapping tool that came with the unit) so I want to know if an update from 1.97b to 2.59 will have any effect on the key mapping at all?
Or maybe there are other reasons why I sohuld / should not do an update - if so, please let me know.
If anyone knows this, please let me know in advance of doing something I would regret
Thanks in advance
Hello, you must modify the car model in the setting factory. You can try GM RAISE
I am running a px5 in a 2010 Insignia and running MX_2.75 on it with all the key mapping running fine. From what I can tell (and I am open to correction here) the key mapping is all done through the canbus adapter - this is why you can't change the key assignments (so my supplier in the UK says).
Thanks both for your comment.
Are updates possible through USB or is mandatory with SD-card via GPS-slot necessary?
(I failed my attempt with USB - so everything was restored to factory, still 1.97b)
GotJsv said:
Thanks both for your comment.
Are updates possible through USB or is mandatory with SD-card via GPS-slot necessary?
(I failed my attempt with USB - so everything was restored to factory, still 1.97b)
Click to expand...
Click to collapse
I use USB without a problem. Are you sure that it is a suitable img?
You might also need to update to Android 6.
GotJsv said:
Hi,
I'm new to the forum, and I have searched for an answer but have not found anything.
Hopefully it's a no-brainer for u experts out here.
I'm very tempted to try an update available for MTCD_MX - later than my 1.97b.
I have 5.1.1 MTCD_MX built into my car, and it works great with the original buttons of the dashborad & steering Wheel etc.
Anyhow, at the moment I have no possibility to change the key-mapping in my unit (nothing happen when I open the Key-mapping tool that came with the unit) so I want to know if an update from 1.97b to 2.59 will have any effect on the key mapping at all?
Or maybe there are other reasons why I sohuld / should not do an update - if so, please let me know.
If anyone knows this, please let me know in advance of doing something I would regret
Thanks in advance
Click to expand...
Click to collapse
You cant use key mapping because it's CANBUS buttons. Updates won't fix this. You can use the app in the development section to address this issue.
I just upgraded to a px5 with 4gb - it's quicker, but remapping is not an option.