Hi all,
I've just unlocked the bootloader and flashed a TWRP custom recovery on my OPO, I am able to enter to the recovery and I've flashed a custom ROM and the FK, but when I try to reboot the system it stays in the splash screen with the OnePlus logo.
I've tried reflashing the SuperSU 2.02 many times, flashing different ROMs and kernels, wiping data, with no luck.
Everytime I enter the recovery and I want to reboot the system, the recovery asks me to root the device because it detects it's not rooted.
I don't know what else do, can anybody help me please?
I've tried TWRP 2.8.0.1 and 2.7.1.1
Thanks in advance.
Exactly what ROM have you flashed? What's the full filename? And what's the exact process you're using to flash?
Transmitted via Bacon
timmaaa said:
Exactly what ROM have you flashed? What's the full filename? And what's the exact process you're using to flash?
Transmitted via Bacon
Click to expand...
Click to collapse
First I tried with mahdi 2.7, and then I've tried with crDroid b7.
The process is, once I'm in the recovery:
- wipe data and dalvik
- flash ROM
- flash gapps
- reboot
before that I have flashed SuperSU 2.02 and rebooted the recovery.
Thanks!
OK, I'm downloading again the flashable files (ROM, kernel and SuperSU) from Firefox instead of Chrome and checking the md5 is not the same than the original downloaded... I don't know why Chrome currupts the downloads, I'll try again with theses recent downloads from Firefox..
pablo.va87 said:
First I tried with mahdi 2.7, and then I've tried with crDroid b7.
The process is, once I'm in the recovery:
- wipe data and dalvik
- flash ROM
- flash gapps
- reboot
before that I have flashed SuperSU 2.02 and rebooted the recovery.
Thanks!
Click to expand...
Click to collapse
Is there any reason you're not performing a full wipe (system/data/cache/dalvik cache) like you should be?
There's no point flashing SuperSU before flashing the ROM because the ROM is pre-rooted, plus you're meant to wipe /system which will wipe SuperSU anyway.
Transmitted via Bacon
pablo.va87 said:
First I tried with mahdi 2.7, and then I've tried with crDroid b7.
The process is, once I'm in the recovery:
- wipe data and dalvik
- flash ROM
- flash gapps
- reboot
before that I have flashed SuperSU 2.02 and rebooted the recovery.
Thanks!
Click to expand...
Click to collapse
before your reboot do a data factory reset
Thanks for your answers, seemed to be something related to the download of the ROM from Chrome, I've just done it from Firefox and flash it without any problem.
Cheers!
Related
Hi All,
I have posted this on the GooManager thread but there hasn't been much activity there recently so asking here as well. Noob question on GooManager...I have the AOKP rom installed on my Sensation and GooManager notifies me of updates to my ROM every now and then. I just want to know if updating my ROM build with GooManager will reset all my custom ROM settings and preferences or will they all be preserved? I'd like to keep my ROM up to date but if it means spending all the time again to setup my preferences and icons/widgets/home screens etc. then I'd rather stick with what I have.
TIA!
I'd recommend to use GooManager only to download the newest ROM and flash it from recovery.
I asume you're using AOKP Swagger from frankenstine, the same I use.
I just download the update from GooManager, boot to recovery, flash ROM, gapps and 4.2 stuff and are ready to go.
All my settings are their after updating - only AdAway needs a reconfiguration and a reboot (and I need to set my alarm clock since I'm overwriting that). Basically you keep all your settings except those you made to the kernel.
Regards
lolmachine4 said:
I'd recommend to use GooManager only to download the newest ROM and flash it from recovery.
I asume you're using AOKP Swagger from frankenstine, the same I use.
I just download the update from GooManager, boot to recovery, flash ROM, gapps and 4.2 stuff and are ready to go.
All my settings are their after updating - only AdAway needs a reconfiguration and a reboot (and I need to set my alarm clock since I'm overwriting that). Basically you keep all your settings except those you made to the kernel.
Regards
Click to expand...
Click to collapse
Oh perfect, yes indeed I am using that exact ROM.
OK so when I boot to recovery, I shouldn't do any wiping? Just simply flash the new file? Will the updated gapps package be in the download I get from GooManager?
freddysensation said:
Oh perfect, yes indeed I am using that exact ROM.
OK so when I boot to recovery, I shouldn't do any wiping? Just simply flash the new file? Will the updated gapps package be in the download I get from GooManager?
Click to expand...
Click to collapse
I only wipe dalvik & cache after each update.
I can't say something about what GooManager downloads as "gapps", I use some I downloaded some weeks ago + some old version of 4.2 stuff. I might need to update my flash-setup too
lolmachine4 said:
I only wipe dalvik & cache after each update.
I can't say something about what GooManager downloads as "gapps", I use some I downloaded some weeks ago + some old version of 4.2 stuff. I might need to update my flash-setup too
Click to expand...
Click to collapse
Thanks lolmachine, for the benefit of anyone who might have the same question as me the following worked:
- Downloaded latest build of my AOKP Rom via GooManager
- Downloaded latest gapps package for my ROM via GooManager
- Boot to Recovery
- Flash new ROM file and then gapps package
- Restart.
My only question is, I didn't wipe davlik and cache so should I, and what difference does it make if I don't?
I used Goo the other day to flash, ummm, bugger, can't remember if it was an update or a new rom.
Oh now I remember, the latest one was an update to Bruce's Rom. I do believe when I tapped flash rom it booted to recovery (the one it installs) and I may have had to select "Install" from there, don't think so though. Either way, I used Goo to handle the install.
I didn't do a wipe. From what I've picked up, wiping is a good way to cover your butt. So if you're having issues and didn't wipe, you go back and do it all again with a wipe. Doing the wipe to start with means you can eliminate those types of issues from the start.
Someone can correct me if I'm wrong (which I probably am )
Hi there, I also received an update to my ROM via Goo Manager. It is CyanogenMod 10.1 by Albinoman887 for my HTC Sensation XE. I am using the EXT4 bootloader. I just installed it a few nights ago so I am completely new to rooting. My question is that there is no option to wipe dalvik cach. EXT4 just says wipe cache, wipe data and wipe system. Does wipe cache wipe dalvik cache as well. Also do I need to re-flash gapps as well after updating and will this wipe my gmail accounts etc?
Thanks,
Adam
thisisadamh said:
Hi there, I also received an update to my ROM via Goo Manager. It is CyanogenMod 10.1 by Albinoman887 for my HTC Sensation XE. I am using the EXT4 bootloader. I just installed it a few nights ago so I am completely new to rooting. My question is that there is no option to wipe dalvik cach. EXT4 just says wipe cache, wipe data and wipe system. Does wipe cache wipe dalvik cache as well. Also do I need to re-flash gapps as well after updating and will this wipe my gmail accounts etc?
Thanks,
Adam
Click to expand...
Click to collapse
You want to select "wipe dalvik+cache" option when you flash an update.
There's no need to flash gapps after a ROM update.
Sent from my Ouya
AndroidSupporter318 said:
You want to select "wipe dalvik+cache" option when you flash an update.
There's no need to flash gapps after a ROM update.
Sent from my Ouya
Click to expand...
Click to collapse
Thanks very much, downloading it now.
Help
im using albinoman's jelly bean rom
excuse me for noob doubts but
1) goo manager shows i have an update, so ive downloaded it. its a zip just like the rom n not just a small update. i have downloaded it now what should i do?
2) if i have to go to the recovery and flash the zip then i have to wipe only the cache right? Im using 4ext recovery.
3) will all my apps get uninstalled? what about the app data?
4) what about gapps? i have a gapps zip file, will i have to flash it again after the update?
Please reply thanks
I finally rooted phone after silly VMUNE7 thing on Verizon but after I get the install openrecoverscript and hit reboot recovery it does not go to teamwiz bootload instead I get something with a green driod on the bottom saying downloading but above it saying in red can't download Odin mode?? Please help I want to run cleanrom for better battery and less bloatware and keep my touchwiz. :crying:
all3rd said:
I finally rooted phone after silly VMUNE7 thing on Verizon but after I get the install openrecoverscript and hit reboot recovery it does not go to teamwiz bootload instead I get something with a green driod on the bottom saying downloading but above it saying in red can't download Odin mode?? Please help I want to run cleanrom for better battery and less bloatware and keep my touchwiz. :crying:
Click to expand...
Click to collapse
sorry man but i think you are talking for a samsung device am i right?
if yes then this is only for sensation/XE/4G devices
yasho170 said:
im using albinoman's jelly bean rom
excuse me for noob doubts but
1) goo manager shows i have an update, so ive downloaded it. its a zip just like the rom n not just a small update. i have downloaded it now what should i do?
2) if i have to go to the recovery and flash the zip then i have to wipe only the cache right? Im using 4ext recovery.
3) will all my apps get uninstalled? what about the app data?
4) what about gapps? i have a gapps zip file, will i have to flash it again after the update?
Please reply thanks
Click to expand...
Click to collapse
Simple.
Go to recovery.
For s-on you must enable smartflash.
Do a nandroid backup.
Dirty flash the update (meaning flash over the previous rom without wiping).
Dirty flash gapps (signed only).
Wipe cache + dalvik.
Reboot.
If it can't boot/run properly then you can just restore the backup or do a clean flash.
First off I'm not experienced in any way, got my Sensation unlocked, rootet and installed Sultanxda's 4.4.2 ROM for sensation. I'm on S-On, too, if anyone wonders.
Updating didnt affect my apps as far as I can tell. Everything seems to be the way as before and everything seems to be working.
What I did was download the ROM manually since the download with goomanager didn't work. I downloaded gapps as backup because I didnt have the zip on my SD, just in case anything would go wrong.
You only need to boot into recovery, with S-On make sure smartflashing or something like that is on, select the zip, flash it and then select wipe cache +dalvik.
It's pretty much what AndroidSupporter318 wrote, just wanted to give feedback and say what I did in detail in case anyone was still wondering.
LxMaD
I guaranted 4EXT Recovery for this type of problem. U don't need to boot into recovery and work with 4ext is very simple.
Hey,
I'm quite new here, maybe there's an easy solution to that, but I don't know what to do.
I've flashed the CyanogenMod 10 on my HTC Sensation and everything works fine, but as soon as I flash Gapps from the CWM the device enters a boot loop bringing me back to the CWM after rebooting.
J've just tried the newest CM10 (http://forum.xda-developers.com/showthread.php?t=1782009) and the problem is still the same.
Thank you!
Stan.
stanix.de said:
Hey,
I'm quite new here, maybe there's an easy solution to that, but I don't know what to do.
I've flashed the CyanogenMod 10 on my HTC Sensation and everything works fine, but as soon as I flash Gapps from the CWM the device enters a boot loop bringing me back to the CWM after rebooting.
J've just tried the newest CM10 (http://forum.xda-developers.com/showthread.php?t=1782009) and the problem is still the same.
Thank you!
Stan.
Click to expand...
Click to collapse
Hi,
Are you s-on/off?
Did you flash the ROM and Gapps at the same time?
malybru said:
Hi,
Are you s-on/off?
Did you flash the ROM and Gapps at the same time?
Click to expand...
Click to collapse
I'm S-OFF. Yes, I flashed at the same time, first the ROM, then the Gapps
stanix.de said:
I'm S-OFF. Yes, I flashed at the same time, first the ROM, then the Gapps
Click to expand...
Click to collapse
Hi,
Then,there is no reason why it should not work.
I would download ROM and Gapps again,place on the sd card,check md5 checksum.
Format all partitions (except sd card),then,install both again.
malybru said:
Hi,
Then,there is no reason why it should not work.
I would download ROM and Gapps again,place on the sd card,check md5 checksum.
Format all partitions (except sd card),then,install both again.
Click to expand...
Click to collapse
Just a question before I start deleting everything - is it possible that this has something to do with the CID number? I have no idea what it is, but I remember that I had to change it once (now it's set to 11111111)
stanix.de said:
Just a question before I start deleting everything - is it possible that this has something to do with the CID number? I have no idea what it is, but I remember that I had to change it once (now it's set to 11111111)
Click to expand...
Click to collapse
no it has not
Problem solved by flashing a new recovery image (CWM Touch 5.8.0.9)
Thanks!
FIX for bootloop after installing GApps
stanix.de said:
Hey,
I'm quite new here, maybe there's an easy solution to that, but I don't know what to do.
I've flashed the CyanogenMod 10 on my HTC Sensation and everything works fine, but as soon as I flash Gapps from the CWM the device enters a boot loop bringing me back to the CWM after rebooting.
J've just tried the newest CM10 (http://forum.xda-developers.com/showthread.php?t=1782009) and the problem is still the same.
Thank you!
Stan.
Click to expand...
Click to collapse
So, here is a fix, follow my steps:
1. DO NOT USE CWM Recovery OR PhilzTouch Recovery, because you will have bootloop with them OR flashing GApps will fail, so u need to use TWRP
2. Copy CM13 ROM to your sdcard1 (extSDCard) and GApps (nano package from opengapps.com, ARM, 6.0)
3. I think it doesn't matter if you have already CM13 ROM or firmware (correct me if it matters), so just do factory reset, clear cache and dalvik cache
4. After that, flash CM13 and GApps at same time (you have option to choose more ZIPs, 1st ROM, 2nd GApps)
5. After that, you will have button "clear cache", click on it
6. Then Reboot your phone
That's it, I've done this on my i9300, I had already installed CM13 and GApps with CWM Recovery (with bootloop) after that I've done these steps..
Sorry for bad English..
Hope this helps...
PLEASE SHARE THIS IF IT WORKS, I REALLY WANT TO HELP PEOPLE
Nadarevicc said:
So, here is a fix, follow my steps:
1. DO NOT USE CWM Recovery OR PhilzTouch Recovery, because you will have bootloop with them OR flashing GApps will fail, so u need to use TWRP
2. Copy CM13 ROM to your sdcard1 (extSDCard) and GApps (nano package from opengapps.com, ARM, 6.0)
3. I think it doesn't matter if you have already CM13 ROM or firmware (correct me if it matters), so just do factory reset, clear cache and dalvik cache
4. After that, flash CM13 and GApps at same time (you have option to choose more ZIPs, 1st ROM, 2nd GApps)
5. After that, you will have button "clear cache", click on it
6. Then Reboot your phone
That's it, I've done this on my i9300, I had already installed CM13 and GApps with CWM Recovery (with bootloop) after that I've done these steps..
Sorry for bad English..
Hope this helps...
PLEASE SHARE THIS IF IT WORKS, I REALLY WANT TO HELP PEOPLE
Click to expand...
Click to collapse
I have done that, and it works, but I think the gapps install somehow corrupted my data, because after my phone didn't boot I backed up data just in case, and doing this it boots, but when I restore data it doesn't. do you have any ideas?
Nadarevicc said:
So, here is a fix, follow my steps:
1. DO NOT USE CWM Recovery OR PhilzTouch Recovery, because you will have bootloop with them OR flashing GApps will fail, so u need to use TWRP
2. Copy CM13 ROM to your sdcard1 (extSDCard) and GApps (nano package from opengapps.com, ARM, 6.0)
3. I think it doesn't matter if you have already CM13 ROM or firmware (correct me if it matters), so just do factory reset, clear cache and dalvik cache
4. After that, flash CM13 and GApps at same time (you have option to choose more ZIPs, 1st ROM, 2nd GApps)
5. After that, you will have button "clear cache", click on it
6. Then Reboot your phone
That's it, I've done this on my i9300, I had already installed CM13 and GApps with CWM Recovery (with bootloop) after that I've done these steps..
Sorry for bad English..
Hope this helps...
PLEASE SHARE THIS IF IT WORKS, I REALLY WANT TO HELP PEOPLE
Click to expand...
Click to collapse
Thank you so much, this worked for me. I was using CWM.
I followed these instructions to install [ROM][P31xx][4.4.4] SlimKat on my P3113:
http://forum.xda-developers.com/showthread.php?t=2619109&highlight=3113
How to install:
Download the Rom for your device and copy to your Tablet
Reboot into Recovery
Wipe Data Factory Reset
format /system
Wipe cache
Wipe dalvic cache
flash Rom
flash GApps
And it went wrong, I don't know why. I used CWM 6.0.2.3. Please, see the picture attached.
HowardAnton said:
I followed these instructions to install [ROM][P31xx][4.4.4] SlimKat on my P3113:
http://forum.xda-developers.com/showthread.php?t=2619109&highlight=3113
How to install:
Download the Rom for your device and copy to your Tablet
Reboot into Recovery
Wipe Data Factory Reset
format /system
Wipe cache
Wipe dalvic cache
flash Rom
flash GApps
And it went wrong, I don't know why. I used CWM 6.0.2.3. Please, see the picture attached.
Click to expand...
Click to collapse
It could be caused by a few things. It usually means outdated recovery. @Android-Andi has recovery thread in the Dev section with the latest versions of PhilZ, TWRP, and CWM. Try flashing one of those. Also, make sure you check the md5/sha1 on the downloaded file to make sure it isn't corrupt.
Sent from my SGH-T989
EDIT: my stupid phone put Italy when I was trying to type usually...
HowardAnton said:
I followed these instructions to install [ROM][P31xx][4.4.4] SlimKat on my P3113:
http://forum.xda-developers.com/showthread.php?t=2619109&highlight=3113
How to install:
Download the Rom for your device and copy to your Tablet
Reboot into Recovery
Wipe Data Factory Reset
format /system
Wipe cache
Wipe dalvic cache
flash Rom
flash GApps
And it went wrong, I don't know why. I used CWM 6.0.2.3. Please, see the picture attached.
Click to expand...
Click to collapse
Status 7 error means your recovery is outdated. Grab one of the latest versions from here: http://forum.xda-developers.com/showthread.php?t=2676180 flash it and your good to go.
Guys,
Thank you very much! I did it!
HowardAnton said:
Guys,
Thank you very much! I did it!
Click to expand...
Click to collapse
Very good! Have a good afternoon.
jrc2
Sent from my SGH-T989
Hi there!
Guys....I need some clues on how to handle with this problem.....
I have my 5.0 LRx210 rooted and installed TWRp recovery by use of Nexus Root Toolkit...the root and the recovery just work fine...
Somehow I managed to try flashing my favorite roms....like Pure White Rom/Xtrasmooth2.4/Cataclysm....and so on..
I have got success only on Pure White Rom...for other roms after successful flashing it just keeps saying: No OS installed are you
sure you wish to reboot. For those roms I have tried both Full Wipe flash and Dirty Flash...but got no success..I don't know why?
Come to the blind end now.... I am just staying on Pure White rom waiting for solution....
hope someone here guide me something...thank you
ayirusp
Thailand
Even if TWRP says no OS try booting up it should work.
Sent from my Nexus 5 using XDA Free mobile app
shri_chanakya said:
Even if TWRP says no OS try booting up it should work.
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
Thank you bro
I did try it already...just stuck on the boot black screen with google logo.....
Although try updating the TWRP recovery to the latest 2.8.2.0, or even CWM recovery....just got the the same result.
The flashing process is mentioned as Successul.., but then when pushing the reboot button it just shows me the above mentioned sentence....
thanks anyway
ayirusp said:
Thank you bro
I did try it already...just stuck on the boot black screen with google logo.....
Although try updating the TWRP recovery to the latest 2.8.2.0, or even CWM recovery....just got the the same result.
The flashing process is mentioned as Successul.., but then when pushing the reboot button it just shows me the above mentioned sentence....
thanks anyway
Click to expand...
Click to collapse
Try flashing TWRP 2.8.1.0 in fastboot and try flashing a rom again, 2.8.2.0 can be quirky for some users.
gee2012 said:
Try flashing TWRP 2.8.1.0 in fastboot and try flashing a rom again, 2.8.2.0 can be quirky for some users.
Click to expand...
Click to collapse
Thank you Bro...
Yes...I do apply root and TWRp recovery 2.8.1.0 via Nexus Root Toolkit 1.9.8....at first.....but it just keeps saying NO OS installed...after finish flashing another rom like Xtrasmoot/Stock5.0 flashable/Cataclysm and bla..bla...bla....(except for Pure White Rom which is my current rom)..and trying to reboot the system.
So I decided to try it with other recoveries like 2.8.2.0 and also the latest CWM recovery....Yet I've got no success till now...that's quite weird
(I have tried flashing with both Full Wipe Flash (Data factory/wipe cache/dalvik cache) and Dirty Flash (wipe cache/dalvik cache)...but as you know...no success....
Thanks anyway...
Thailand
ayirusp said:
Thank you Bro...
Yes...I do apply root and TWRp recovery 2.8.1.0 via Nexus Root Toolkit 1.9.8....at first.....but it just keeps saying NO OS installed...after finish flashing another rom like Xtrasmoot/Stock5.0 flashable/Cataclysm and bla..bla...bla....(except for Pure White Rom which is my current rom)..and trying to reboot the system.
So I decided to try it with other recoveries like 2.8.2.0 and also the latest CWM recovery....Yet I've got no success till now...that's quite weird
(I have tried flashing with both Full Wipe Flash (Data factory/wipe cache/dalvik cache) and Dirty Flash (wipe cache/dalvik cache)...but as you know...no success....
Thanks anyway...
Thailand
Click to expand...
Click to collapse
Well if it we`re me i`d reflash the factory image and start over from scratch, then install TWRP 2.8.1.0 and flash superSU.zip 2.3.5 and flash a custom rom.
gee2012 said:
Well if it we`re me i`d reflash the factory image and start over from scratch, then install TWRP 2.8.1.0 and flash superSU.zip 2.3.5 and flash a custom rom.
Click to expand...
Click to collapse
Yeah...I reflashed it with factory image 5.0 LRX21O downloaded from Official Google Resource and began the whole process of rooting and recovery installation (TWRP 2.8.1.0 and SuperSu.zip..offcourse).....and then started flashing custom roms...the only rom that I could get through with success is Pure White Rom......for other roms it just had been like I mentioned above......
.....I can not figure it out now....why?
Thank you my Bro....
ayirusp said:
Yeah...I reflashed it with factory image 5.0 LRX21O downloaded from Official Google Resource and began the whole process of rooting and recovery installation (TWRP 2.8.1.0 and SuperSu.zip..offcourse).....and then started flashing custom roms...the only rom that I could get through with success is Pure White Rom......for other roms it just had been like I mentioned above......
.....I can not figure it out now....why?
Thank you my Bro....
Click to expand...
Click to collapse
Because some things on your phone are messed up and figuering out what that is/are will probably take longer then starting over imo.
New official rom
Hi,
Not sure it's the right place to post, tell me if not.
I received the notification for update yesterday and would like to install it. But I'm bootloader unlocked, rooted and with TWRP installed.
I've tried to install it "the normal way" anyway, but after downloading the update via OTA and rebooting, the phone reboots in TWRP and does not install the update through it...
Is there a way to install the update without loosing TWRP, root and data ?
S377 said:
Hi,
Not sure it's the right place to post, tell me if not.
I received the notification for update yesterday and would like to install it. But I'm bootloader unlocked, rooted and with TWRP installed.
I've tried to install it "the normal way" anyway, but after downloading the update via OTA and rebooting, the phone reboots in TWRP and does not install the update through it...
Is there a way to install the update without loosing TWRP, root and data ?
Click to expand...
Click to collapse
Not update OTA with twrp recovery
You're need:
Download full zip rom
Flash it by twrp recovery without wipe.
heobanhki said:
Not update OTA with twrp recovery
You're need:
Download full zip rom
Flash it by twrp recovery without wipe.
Click to expand...
Click to collapse
Ok, so I could just do the following steps ?
- Download the ROM by the MIUI updater (which stores the full zip in "downloaded_rom" folder")
- Reboot to TWRP
- Wipe Dalvik/ART and Cache
- Flash the downloaded zip
- Optionally : Flash Magisk to retrieve root
- Reboot
Since my post, I've found this thread for Mi Mix 2 (not 2s) which talk about a LazyFlasher zip...
Isn't it needed ?
subboxcb said:
New official rom
Click to expand...
Click to collapse
Missprint in that update note? My Global 10.3.3.0 PDGMIXM got the security patch from May 1 :S
Update: Nvm, said May patch a line down...
Sent from my MIX 2S using XDA Labs
S377 said:
Ok, so I could just do the following steps ?
- Download the ROM by the MIUI updater (which stores the full zip in "downloaded_rom" folder")
- Reboot to TWRP
- Wipe Dalvik/ART and Cache
- Flash the downloaded zip
- Optionally : Flash Magisk to retrieve root
- Reboot
Since my post, I've found this thread for Mi Mix 2 (not 2s) which talk about a LazyFlasher zip...
Isn't it needed ?
Click to expand...
Click to collapse
Someone can tell me please ?
S377 said:
Someone can tell me please ?
Click to expand...
Click to collapse
Don't upgrade!! There's no twrp for the new rom
I'll wait some days to see if a working twrp appears else I'm flashing 10.2.2 again (which is a PITA since it needs "flash_all" = reinstall everything)
xumixu said:
Don't upgrade!! There's no twrp for the new rom
I'll wait some days to see if a working twrp appears else I'm flashing 10.2.2 again (which is a PITA since it needs "flash_all" = reinstall everything)
Click to expand...
Click to collapse
Hi !
Please define "no twrp for the new rom"
I'm running V10.3.3.0 with official twrp (3.3.0) and can boot into twrp and install things from there.
(didn't test things like backup/restore though)
kr
flushbeer said:
Hi !
Please define "no twrp for the new rom"
I'm running V10.3.3.0 with official twrp (3.3.0) and can boot into twrp and install things from there.
(didn't test things like backup/restore though)
kr
Click to expand...
Click to collapse
Did you do any workaround for installation? I installed it as usual and it gets deleted at reboot (after flashing from 10.2.2 to 10.3.3).
xumixu said:
Did you do any workaround for installation? I installed it as usual and it gets deleted at reboot (after flashing from 10.2.2 to 10.3.3).
Click to expand...
Click to collapse
copy ROM to any other folder (e.g. from /sdcard/downloaded_rom to /sdcard), then ROM will not get deleted.
(or even better OTG if you have)
flushbeer said:
copy ROM to any other folder (e.g. from /sdcard/downloaded_rom to /sdcard), then ROM will not get deleted.
(or even better OTG if you have)
Click to expand...
Click to collapse
i mean twrp get deleted from the recovery partition on reboot
and i didnt used the "update" zip, but the full rom from miui download site
xumixu said:
i mean twrp get deleted from the recovery partition on reboot
and i didnt used the "update" zip, but the full rom from miui download site
Click to expand...
Click to collapse
oh, I misunderstood.
this behaviour I had with EVERY update. Just installed twrp again and everything working again.
Same here, but in this last update it gets reverted when I reboot, Whether I let it restart right after flashing twrp or if get into it after flashing. Is also noteworthy that it doesn't prompt me the "partition modification" message.
Is there any "settings" or cache for twrp that can be cleaned to have a "fresh" install? It remembers the time zone so I think it should save some things somewhere
Hm. weird. what I did was fastboot into TWRP and from there install as image from internal storage (or OTG).
(Might be, that I tried another version (v14? v15? from this forum) because I tested a few things because of my phone freezing problems. But I guess this should not make any difference.)
So no black magic here.
The only thing i know: I have it running.
Ok, thanks to both of you for your response.
I'll try to install it and will let you know for TWRP !
@xumixu : have you tried to "reboot to recovery" from TWRP once you've installed it and boot to it from adb ?
S377 said:
Ok, thanks to both of you for your response.
I'll try to install it and will let you know for TWRP !
@xumixu : have you tried to "reboot to recovery" from TWRP once you've installed it and boot to it from adb ?
Click to expand...
Click to collapse
No issues reboting into recovery after twrp installation. But once i get into system, recovery partition is factory restored to mi-recovery 3.0
All went good for me !
I've done the following steps :
- Download the full ROM (~1.9 GB) on the official MIUI website
- Reboot to TWRP
- Wipe Dalvik/ART and Cache
- Flash the downloaded zip
- Wipe Dalvik/ART and Cache
- Flash Magisk to retrieve root
- Wipe Dalvik/ART and Cache
- Reboot TO RECOVERY !
- Reboot to system
I've done this going from MIUI v10.2.2.0 to v10.3.3.0 and using the official TWRP 3.2.3.0
S377 said:
All went good for me !
I've done the following steps :
- Download the full ROM (~1.9 GB) on the official MIUI website
- Reboot to TWRP
- Wipe Dalvik/ART and Cache
- Flash the downloaded zip
- Wipe Dalvik/ART and Cache
- Flash Magisk to retrieve root
- Wipe Dalvik/ART and Cache
- Reboot TO RECOVERY !
- Reboot to system
I've done this going from MIUI v10.2.2.0 to v10.3.3.0 and using the official TWRP 3.2.3.0
Click to expand...
Click to collapse
tried all those steps and I still end up bootlooped (with magisk 19 and 19.3).
ill back up important data, and make a clean 10.3.3 installation. If it doesnt work with 10.3.3, I'll rollback to 10.2.2
Seems that my rom "setup" was the culprit. Made a clean 10.3.3 install (fastboot mode flash_all.bat), reinstalled twrp, magisk and it booted ok (and twrp stayed togheter with encryption support).
No idea what happened in the update from my 10.2.2 to 10.3.3, but twrp works ok on 10.3.3 with a clean installation
Ok, weird... But good to know that all is ok now