Need help - Install [ROM][P31xx][4.4.4] SlimKat went wrong - Galaxy Tab 2 Q&A, Help & Troubleshooting

I followed these instructions to install [ROM][P31xx][4.4.4] SlimKat on my P3113:
http://forum.xda-developers.com/showthread.php?t=2619109&highlight=3113
How to install:
Download the Rom for your device and copy to your Tablet
Reboot into Recovery
Wipe Data Factory Reset
format /system
Wipe cache
Wipe dalvic cache
flash Rom
flash GApps
And it went wrong, I don't know why. I used CWM 6.0.2.3. Please, see the picture attached.

HowardAnton said:
I followed these instructions to install [ROM][P31xx][4.4.4] SlimKat on my P3113:
http://forum.xda-developers.com/showthread.php?t=2619109&highlight=3113
How to install:
Download the Rom for your device and copy to your Tablet
Reboot into Recovery
Wipe Data Factory Reset
format /system
Wipe cache
Wipe dalvic cache
flash Rom
flash GApps
And it went wrong, I don't know why. I used CWM 6.0.2.3. Please, see the picture attached.
Click to expand...
Click to collapse
It could be caused by a few things. It usually means outdated recovery. @Android-Andi has recovery thread in the Dev section with the latest versions of PhilZ, TWRP, and CWM. Try flashing one of those. Also, make sure you check the md5/sha1 on the downloaded file to make sure it isn't corrupt.
Sent from my SGH-T989
EDIT: my stupid phone put Italy when I was trying to type usually...

HowardAnton said:
I followed these instructions to install [ROM][P31xx][4.4.4] SlimKat on my P3113:
http://forum.xda-developers.com/showthread.php?t=2619109&highlight=3113
How to install:
Download the Rom for your device and copy to your Tablet
Reboot into Recovery
Wipe Data Factory Reset
format /system
Wipe cache
Wipe dalvic cache
flash Rom
flash GApps
And it went wrong, I don't know why. I used CWM 6.0.2.3. Please, see the picture attached.
Click to expand...
Click to collapse
Status 7 error means your recovery is outdated. Grab one of the latest versions from here: http://forum.xda-developers.com/showthread.php?t=2676180 flash it and your good to go.

Guys,
Thank you very much! I did it!

HowardAnton said:
Guys,
Thank you very much! I did it!
Click to expand...
Click to collapse
Very good! Have a good afternoon.
jrc2
Sent from my SGH-T989

Related

[Q] [HELP] Can't boot GT-S5670 (galaxy fit)

Hi Guys,
Has anyone had this problem?
I had Creed's Rom v2.0 last month, and that worked perfect. I used it for a month.
this morning I decided to change my android rom into a new version of Creed's Rom.
I tried to boot and flash the Creed's Rom v3.0 and it's successfully flashed,,
But, whenever I try to boot my phone, I got stuck with the boot animation!!
It's never take me into the home screen??
It's keep showing me the bootanimation (Creed's Rom Text) for a long time ..,
So i decided to go back into SGFit default stock and successfully flashed it with ODIN..
When the device try to reboot, I get the same SAMSUNG bootanimation,,
it's keep rebooting the phone again and again (without any result),
And then I decide to flash the other rom., I tried "CyanogenMod 7.1",, I flashed it successfully, I do "Wipe Data / Reset" and "Wipe Cache Partition" also "Wipe Dalvik Cache" too, but whenever I try to reboot the phone, I've always got the freakin bootanimation and never take into the homescreen..
I also reformatted the memory card, still no result... :/
Any ideas please???
Boot into cwm and format system data cache dalvik
Then install a ROM using cwm
Sent from my GT-S5670 using xda premium
Aspire said:
Boot into cwm and format system data cache dalvik
Then install a ROM using cwm
Sent from my GT-S5670 using xda premium
Click to expand...
Click to collapse
I've do these steps clearly.. still no result..
try to wipe data, cache, format system, wipe dalvik,
INSTALL ZIP file, wipe data again, wipe cache again, then reboot...
cygnus39 said:
try to wipe data, cache, format system, wipe dalvik,
INSTALL ZIP file, wipe data again, wipe cache again, then reboot...
Click to expand...
Click to collapse
I've do it already,, still no result..
the bootanimation keep restarting again and again,, never take into homescreen..
try to flash another rom...
marbe the zip file you're downloading is corrupt or damaged...
cygnus39 said:
try to flash another rom...
marbe the zip file you're downloading is corrupt or damaged...
Click to expand...
Click to collapse
Well,, let's see.. I'll download another one..
ansyori28 said:
Well,, let's see.. I'll download another one..
Click to expand...
Click to collapse
and this time while flashing via cwm, format system (its under mounts and storage)...
a.cid said:
and this time while flashing via cwm, format system (its under mounts and storage)...
Click to expand...
Click to collapse
I know this thing..
heyy guys...
I've done everythings u said..,
I've flashed a new rom, wipe data, wipe cache, wipe dalvik, install the zip file, wipe data again, wipe cache again, then reboot...
But there is no result at all...
I still get the a bootanimation.., and now, I tried flash "CyanogenMod 7 RC5.6", and the result is nothing.., now I got the "Android" text, it's never take me into home..
Any ideas??
I had a similar problem yesterday. To me was advised to install via ODIN stock ROM (S5670XXKPI) which has 4 files. I did it, and the system is booted. Then I changed stosk and other custom ROM and everything works OK.
ZmisiS said:
I had a similar problem yesterday. To me was advised to install via ODIN stock ROM (S5670XXKPI) which has 4 files. I did it, and the system is booted. Then I changed stosk and other custom ROM and everything works OK.
Click to expand...
Click to collapse
where u get that stock rom (S5670XXKPI) ?? I'll try to flash it..
hi dear the same problem i have been faced early and don't worry at all. first of all your sim card and memory card eject of the phone.go to recovery mode (cwm or stock recovery) then wipe cache and factory reset first than flash stock rom 2.3.6 DDKT3 WITH ODIN.AFTER FLASH WIPE cache and factory reset again.
simple and i am sure you problem may be solve.....
if you any problem with stock rom updates please mail to me and i will send an link attachment to you an official stock rom .
this is my first post in this forum so i can't submit this link here
email : [email protected]
by....
pradeep170481 said:
hi dear the same problem i have been faced early and don't worry at all. first of all your sim card and memory card eject of the phone.go to recovery mode (cwm or stock recovery) then wipe cache and factory reset first than flash stock rom 2.3.6 DDKT3 WITH ODIN.AFTER FLASH WIPE cache and factory reset again.
simple and i am sure you problem may be solve.....
if you any problem with stock rom updates please mail to me and i will send an link attachment to you an official stock rom .
this is my first post in this forum so i can't submit this link here
email : [email protected]
by....
Click to expand...
Click to collapse
thanks,, but how about "S5670DXT4" ?? I'm currently downloading this version.. can I use this one?..
ansyori28 said:
where u get that stock rom (S5670XXKPI) ?? I'll try to flash it..
Click to expand...
Click to collapse
S5670XXKPI link:
http://hotfile.com/dl/145761279/c6ea6ce/S5670XXKPI.zip.html
ZmisiS said:
S5670XXKPI link:
http://hotfile.com/dl/145761279/c6ea6ce/S5670XXKPI.zip.html
Click to expand...
Click to collapse
thanks,, but how about the "S5670DXT4" version??..
Will it work?
nevermind, wrong post by me...
ansyori28 said:
thanks,, but how about the "S5670DXT4" version??..
Will it work?
Click to expand...
Click to collapse
I installed S5670XXKPI. After I installed S5670KPU, S5670XWKT2, and work for me. S5670DXKT4 I don't installed. I don't know will it work for you. I think it should.
The first you install S5670XXKPI, after you installed and the system is booted, you later install what want.
ZmisiS said:
I installed S5670XXKPI. After I installed S5670KPU, S5670XWKT2, and work for me. S5670DXKT4 I don't installed. I don't know will it work for you. I think it should.
The first you install S5670XXKPI, after you installed and the system is booted, you later install what want.
Click to expand...
Click to collapse
thanks,,
It's Working Perfectly..,
ansyori28 said:
thanks,,
It's Working Perfectly..,
Click to expand...
Click to collapse
OK. You're welcome.

Boot issue

So I decided to try out Paranoid Android R4 and read all the instructions and downloaded all the files provided in the thread. Did the wipes and formatting in the order provided (x3 amount of times) then flashed the rom and the other file provided and rebooted my phone. The problem is that when I boot it it keeps looping the Paranoid Android logo and that's it. I've wiped everything clean multiple times and tried flashing about 3-4 times and still nothing. The thread provided only two zips. The rom and a gapps fix. Perhaps I'm missing a file found elsewhere or something? Thanks in advance.
(thread)
http://forum.xda-developers.com/showthread.php?t=1750588
Musehk said:
So I decided to try out Paranoid Android R4 and read all the instructions and downloaded all the files provided in the thread. Did the wipes and formatting in the order provided (x3 amount of times) then flashed the rom and the other file provided and rebooted my phone. The problem is that when I boot it it keeps looping the Paranoid Android logo and that's it. I've wiped everything clean multiple times and tried flashing about 3-4 times and still nothing. The thread provided only two zips. The rom and a gapps fix. Perhaps I'm missing a file found elsewhere or something? Thanks in advance.
(thread)
http://forum.xda-developers.com/showthread.php?t=1750588
Click to expand...
Click to collapse
Flash Dark Side Cache Wipe and see if that helps at all. If u are looking to flash it again then use Dark Side Super Wipe. The Cache Wipe is for if you encounter problems after the flash. I can't remember if it is just to fix fc's or help boot loop but it shouldn't hurt to flash the wipe
Note: I have not used Paranoid Android rom so I am unfamiliar with their flashing procedure / if zips are missing
Sent from my Skyrocket i727 running Sky ICS
PS: If I was able to help you then hit thanks
DO NOT DARK SIDE WIPE ON AOSP OR CM9 ROMS!!!! also you need to read the OP's instructions. Using clock work mod touch by sk8.
Step i did.
Wipe /system
Wipe /data
Wipe data factory reset
Wipe Cache
Wipe Dalvik cache
Install rom
Install fixedgapps
Reboot. Let phone sit for a few mins after if loaded.
Reboot phone and done.
nidnarb said:
DO NOT DARK SIDE WIPE ON AOSP OR CM9 ROMS!!!! also you need to read the OP's instructions. Using clock work mod touch by sk8.
Step i did.
Wipe /system
Wipe /data
Wipe data factory reset
Wipe Cache
Wipe Dalvik cache
Install rom
Install fixedgapps
Reboot. Let phone sit for a few mins after if loaded.
Reboot phone and done.
Click to expand...
Click to collapse
I was not aware of this. Sorry for any confusion!
Sent from my Skyrocket i727 running Sky ICS
PS: If I was able to help you then hit thanks
nidnarb said:
DO NOT DARK SIDE WIPE ON AOSP OR CM9 ROMS!!!! also you need to read the OP's instructions. Using clock work mod touch by sk8.
Step i did.
Wipe /system
Wipe /data
Wipe data factory reset
Wipe Cache
Wipe Dalvik cache
Install rom
Install fixedgapps
Reboot. Let phone sit for a few mins after if loaded.
Reboot phone and done.
Click to expand...
Click to collapse
I did read the OP's instructions. I state that in the post. I had installed ClockworkMod touch through ROM Manager. I don't know if there's a difference between installing it that way and flashing the one by sk8. I didn't have any touch controls after installing it, though. What's the difference between flashing with CWM Touch and regular CWM anyway?
Musehk said:
I did read the OP's instructions. I state that in the post. I had installed ClockworkMod touch through ROM Manager. I don't know if there's a difference between installing it that way and flashing the one by sk8. I didn't have any touch controls after installing it, though. What's the difference between flashing with CWM Touch and regular CWM anyway?
Click to expand...
Click to collapse
dont use cwm through rom manager, why u may ask, you are having problems right? if you use sk8's it rules out other issues.
if you dont know how to install it, just go to the link in my sig goto to the download section in that post and everything u need is there

[Q] Boot loop after installing Gapps

Hey,
I'm quite new here, maybe there's an easy solution to that, but I don't know what to do.
I've flashed the CyanogenMod 10 on my HTC Sensation and everything works fine, but as soon as I flash Gapps from the CWM the device enters a boot loop bringing me back to the CWM after rebooting.
J've just tried the newest CM10 (http://forum.xda-developers.com/showthread.php?t=1782009) and the problem is still the same.
Thank you!
Stan.
stanix.de said:
Hey,
I'm quite new here, maybe there's an easy solution to that, but I don't know what to do.
I've flashed the CyanogenMod 10 on my HTC Sensation and everything works fine, but as soon as I flash Gapps from the CWM the device enters a boot loop bringing me back to the CWM after rebooting.
J've just tried the newest CM10 (http://forum.xda-developers.com/showthread.php?t=1782009) and the problem is still the same.
Thank you!
Stan.
Click to expand...
Click to collapse
Hi,
Are you s-on/off?
Did you flash the ROM and Gapps at the same time?
malybru said:
Hi,
Are you s-on/off?
Did you flash the ROM and Gapps at the same time?
Click to expand...
Click to collapse
I'm S-OFF. Yes, I flashed at the same time, first the ROM, then the Gapps
stanix.de said:
I'm S-OFF. Yes, I flashed at the same time, first the ROM, then the Gapps
Click to expand...
Click to collapse
Hi,
Then,there is no reason why it should not work.
I would download ROM and Gapps again,place on the sd card,check md5 checksum.
Format all partitions (except sd card),then,install both again.
malybru said:
Hi,
Then,there is no reason why it should not work.
I would download ROM and Gapps again,place on the sd card,check md5 checksum.
Format all partitions (except sd card),then,install both again.
Click to expand...
Click to collapse
Just a question before I start deleting everything - is it possible that this has something to do with the CID number? I have no idea what it is, but I remember that I had to change it once (now it's set to 11111111)
stanix.de said:
Just a question before I start deleting everything - is it possible that this has something to do with the CID number? I have no idea what it is, but I remember that I had to change it once (now it's set to 11111111)
Click to expand...
Click to collapse
no it has not
Problem solved by flashing a new recovery image (CWM Touch 5.8.0.9)
Thanks!
FIX for bootloop after installing GApps
stanix.de said:
Hey,
I'm quite new here, maybe there's an easy solution to that, but I don't know what to do.
I've flashed the CyanogenMod 10 on my HTC Sensation and everything works fine, but as soon as I flash Gapps from the CWM the device enters a boot loop bringing me back to the CWM after rebooting.
J've just tried the newest CM10 (http://forum.xda-developers.com/showthread.php?t=1782009) and the problem is still the same.
Thank you!
Stan.
Click to expand...
Click to collapse
So, here is a fix, follow my steps:
1. DO NOT USE CWM Recovery OR PhilzTouch Recovery, because you will have bootloop with them OR flashing GApps will fail, so u need to use TWRP
2. Copy CM13 ROM to your sdcard1 (extSDCard) and GApps (nano package from opengapps.com, ARM, 6.0)
3. I think it doesn't matter if you have already CM13 ROM or firmware (correct me if it matters), so just do factory reset, clear cache and dalvik cache
4. After that, flash CM13 and GApps at same time (you have option to choose more ZIPs, 1st ROM, 2nd GApps)
5. After that, you will have button "clear cache", click on it
6. Then Reboot your phone
That's it, I've done this on my i9300, I had already installed CM13 and GApps with CWM Recovery (with bootloop) after that I've done these steps..
Sorry for bad English..
Hope this helps...
PLEASE SHARE THIS IF IT WORKS, I REALLY WANT TO HELP PEOPLE
Nadarevicc said:
So, here is a fix, follow my steps:
1. DO NOT USE CWM Recovery OR PhilzTouch Recovery, because you will have bootloop with them OR flashing GApps will fail, so u need to use TWRP
2. Copy CM13 ROM to your sdcard1 (extSDCard) and GApps (nano package from opengapps.com, ARM, 6.0)
3. I think it doesn't matter if you have already CM13 ROM or firmware (correct me if it matters), so just do factory reset, clear cache and dalvik cache
4. After that, flash CM13 and GApps at same time (you have option to choose more ZIPs, 1st ROM, 2nd GApps)
5. After that, you will have button "clear cache", click on it
6. Then Reboot your phone
That's it, I've done this on my i9300, I had already installed CM13 and GApps with CWM Recovery (with bootloop) after that I've done these steps..
Sorry for bad English..
Hope this helps...
PLEASE SHARE THIS IF IT WORKS, I REALLY WANT TO HELP PEOPLE
Click to expand...
Click to collapse
I have done that, and it works, but I think the gapps install somehow corrupted my data, because after my phone didn't boot I backed up data just in case, and doing this it boots, but when I restore data it doesn't. do you have any ideas?
Nadarevicc said:
So, here is a fix, follow my steps:
1. DO NOT USE CWM Recovery OR PhilzTouch Recovery, because you will have bootloop with them OR flashing GApps will fail, so u need to use TWRP
2. Copy CM13 ROM to your sdcard1 (extSDCard) and GApps (nano package from opengapps.com, ARM, 6.0)
3. I think it doesn't matter if you have already CM13 ROM or firmware (correct me if it matters), so just do factory reset, clear cache and dalvik cache
4. After that, flash CM13 and GApps at same time (you have option to choose more ZIPs, 1st ROM, 2nd GApps)
5. After that, you will have button "clear cache", click on it
6. Then Reboot your phone
That's it, I've done this on my i9300, I had already installed CM13 and GApps with CWM Recovery (with bootloop) after that I've done these steps..
Sorry for bad English..
Hope this helps...
PLEASE SHARE THIS IF IT WORKS, I REALLY WANT TO HELP PEOPLE
Click to expand...
Click to collapse
Thank you so much, this worked for me. I was using CWM.

[Q] A bit confused.

Heys,
I've been installing ROM's for a while and I was looking at this ROM:
http://forum.xda-developers.com/showthread.php?t=2387504
This is the page to download the ROM but it gives me a load of files and I'm not sure how to flash it.
I would ask it in that thread but it doesn't let me as I'm new :3
Thanks
jabire3 said:
Heys,
I've been installing ROM's for a while and I was looking at this ROM:
http://forum.xda-developers.com/showthread.php?t=2387504
This is the page to download the ROM but it gives me a load of files and I'm not sure how to flash it.
I would ask it in that thread but it doesn't let me as I'm new :3
Thanks
Click to expand...
Click to collapse
Choose the latest/newest zip file..
Well I assume you know how to flash ROM via Recovery Mode. And well, just reminding if you come from another ROM, you have to do full wipe (wipe data, cache and dalvik cache). Good luck..
leonfirdaus said:
Choose the latest/newest zip file..
Well I assume you know how to flash ROM via Recovery Mode. And well, just reminding if you come from another ROM, you have to do full wipe (wipe data, cache and dalvik cache). Good luck..
Click to expand...
Click to collapse
Ahhh... I should've noticed the date :>
Anyways, thank you for the help, its was much appreciated.

Galaxy Ace GT-S7500 CM 11.0: Is It Possible To Provide Backups?

is possible to provide cm11 backup?
Is possible to provide backups?
I'm asking this because the CyanogenMod 11.0 for GT-S7500 rom that i was using got corrupted and my clean backup too, so I was thinking if was possible to provide backups?
I also tried to re-flash but it got in to boot loop.
sorry for my bad english
Had you try to wipe data cache and dalvik ?? Do youe use TWRP or CWM ?
zyxw-androidiani said:
Had you try to wipe data cache and dalvik ?? Do youe use TWRP or CWM ?
Click to expand...
Click to collapse
i use twrp and yes i had wiped data cache and dalvik
put on your sd card the cm11, and wipe data, cache, dalvik, boot and system partition (deleting system and boot partition you will haven't no rom so no system) and re-flash the rom, or go on download mode flash stock rom and re-try.
zyxw-androidiani said:
put on your sd card the cm11, and wipe data, cache, dalvik, boot and system partition (deleting system and boot partition you will haven't no rom so no system) and re-flash the rom, or go on download mode flash stock rom and re-try.
Click to expand...
Click to collapse
sorry but i didn't understand what you say because i am not very good with english.
so i wipe data, cacha, dalvik , system and boot?but where is boot?
and what happens if it fails?
Do you speak italian ?
Sorry, "boot" option don't exist, go on recovery Wipe-->Advance wipe and select "Dalvik Cache", "System","Cache" and "Data". when you will delete them you will not have any thing on the phone just the download mode and recovery so you must flash a rom to boot up the phone, select the cm11 and flash it.
zyxw-androidiani said:
Do you speak italian ?
Sorry, "boot" option don't exist, go on recovery Wipe-->Advance wipe and select "Dalvik Cache", "System","Cache" and "Data". when you will delete them you will not have any thing on the phone just the download mode and recovery so you must flash a rom to boot up the phone, select the cm11 and flash it.
Click to expand...
Click to collapse
i don't speak italian
it didn't work, appeared a box saying something about superus
Click "don't install" or something like this go back and reboot, wait 5-10 minutes for the first boot. it's not possible that it didn't work, are you sure that you are making the correct steps for install a rom ?
First make the 4 wipe and after go back on the menu e and install the rom.
zyxw-androidiani said:
Click "don't install" or something like this go back and reboot, wait 5-10 minutes for the first boot. it's not possible that it didn't work, are you sure that you are making the correct steps for install a rom ?
First make the 4 wipe and after go back on the menu e and install the rom.
Click to expand...
Click to collapse
i followed this video:
youtube.com/watch?v=ix7rrKS4keI
yes follow this guide you must resolve else flash the stock rom via odin follow the guide in the forum.
zyxw-androidiani said:
yes follow this guide you must resolve else flash the stock rom via odin follow the guide in the forum.
Click to expand...
Click to collapse
i couldn't find the stock rom.
can you link the stock rom?
follow this guide http://forum.xda-developers.com/showthread.php?t=2563607 you will find the stock rom and how to flash it first see which variant you have GT-S7500, GT-S7500L or GT-S7500W

Categories

Resources