Database Info

[GUIDE]Yuntab P500 (M5000) Rooting Guide and ROM

NOTE: The rooting method may have the potential to BRICK the phone and will void your warranty, so do it at your own RISK. I am not responsible for any problems caused by this guide..
I recently bought a Yuntab P500 PDA Smartphone 5 inch Screen Android. Here are its main features:
CPU: Qualcomm MSM7227a 1.0GHz / Adreno 200 GPU.
Display: 5.0 inch Mulititouch screen, 800 x 480px.
OS: Android 4.0 Ice Cream Sandwich.
Memory: 512MB RAM 8GB ROM.
Camera: Dual Cameras Back: 5MP, Front: 0.3MP.
Bluetooth 2.1 +EDR, Bluetooth stereo (A2DP).
I am very pleased with the phone but still wanted to root it. However, I found it is very hard to root the phone because there is lacking of information of it on the Internet.
Its driver files are included on the phone internal rom with a folder called 'android4.0_usb_driver_32bit'. Once you connect the phone with USB Debugging enabled, you will see a new CD drive, double click it and copy the whole folder to your computer.
However, Its driver is not working on my Windows 7 64 bit laptop, so I had to try my XP one and it took a while to install all drivers. Then I followed this instruction to try Root_with_Restore_by_Bin4ry, I got the message to say the phone was rooted but it was not working at all.
Luckily, I found Karbonn A15 is similar to Yuntab P500, so followed ntstatic's instruction to have another try.
I followed the following steps to use Android Root Unlock, DON'T try anything else including A15 driver, it may BRICK your phone!
1. Enable USB Debugging - Under SETTINGS - DEVELOPER OPTIONS
2. Install the drivers for the phone - copy drivers from your phone internal card.
3. download "Android Root Unlock" from sourceforge.net and extract it to a folder on your harddisk
4. navigate to the above folder and run the batch file ICS_Root_Unlocker.bat
the batch file will reboot your phone a couple of times and will wait with a message "Press Any Key to continue"
IMP NOTE : if you pc is saying "PRESS ANY KEY" note if your phone is on or rebooting....
if it is Rebooting, wait for it to start before pressing a key
5. After a couple of boots the phone will be rooted
6. verify that the Root is complete by observing a "Superuser" shortcut in the application list
Thanks for that guide, now my phone has been rooted successfully.
I hope this will help people like me. Good luck.
I got the ROM from a Chinese guy. I haven't tried them yet, so flash them at your OWN RISK as well.
OTA Zip format: P500W-ota-1.0.623_20120908.zip
BIN format and the updating tool: P500W_1.0.623_20120908_SHIP & Porter

In Response...
freegoat said:
NOTE: The rooting method may have the potential to BRICK the phone and will void your warranty, so do it at your own RISK. I am not responsible for any problems caused by this guide..
I recently bought a Yuntab P500 PDA Smartphone 5 inch Screen Android. Here are its main features:
CPU: Qualcomm MSM7227a 1.0GHz / Adreno 200 GPU.
Display: 5.0 inch Mulititouch screen, 800 x 480px.
OS: Android 4.0 Ice Cream Sandwich.
Memory: 512MB RAM 8GB ROM.
Camera: Dual Cameras Back: 5MP, Front: 0.3MP.
Bluetooth 2.1 +EDR, Bluetooth stereo (A2DP).
I am very pleased with the phone but still wanted to root it. However, I found it is very hard to root the phone because there is lacking of information of it on the Internet.
Its driver files are included on the phone internal rom with a folder called 'android4.0_usb_driver_32bit'. Once you connect the phone with USB Debugging enabled, you will see a new CD drive, double click it and copy the whole folder to your computer.
However, Its driver is not working on my Windows 7 64 bit laptop, so I had to try my XP one and it took a while to install all drivers. Then I followed this instruction to try Root_with_Restore_by_Bin4ry, I got the message to say the phone was rooted but it was not working at all.
Luckily, I found Karbonn A15 is similar to Yuntab P500, so followed ntstatic's instruction to have another try.
I followed the following steps to use Android Root Unlock, DON'T try anything else including A15 driver, it may BRICK your phone!
1. Enable USB Debugging - Under SETTINGS - DEVELOPER OPTIONS
2. Install the drivers for the phone - copy drivers from your phone internal card.
3. download "Android Root Unlock" from sourceforge.net and extract it to a folder on your harddisk
4. navigate to the above folder and run the batch file ICS_Root_Unlocker.bat
the batch file will reboot your phone a couple of times and will wait with a message "Press Any Key to continue"
IMP NOTE : if you pc is saying "PRESS ANY KEY" note if your phone is on or rebooting....
if it is Rebooting, wait for it to start before pressing a key
5. After a couple of boots the phone will be rooted
6. verify that the Root is complete by observing a "Superuser" shortcut in the application list
Thanks for that guide, now my phone has been rooted successfully.
I hope this will help people like me. Good luck.
Does anybody know where to obtain the ROM of the phone? Thanks in advance.
Click to expand...
Click to collapse
Thank you for all the work you've put into this project. Unfortunately for me, I am unable to root my Yuntab aka Cobalt SP500. When running the batch file, I received the following: failed, failed, failed after every Press Any Key to Continue message. Now, I am using Windows 7 under the 64-bit architecture. Is this possibly the reason?

dcsoul said:
Thank you for all the work you've put into this project. Unfortunately for me, I am unable to root my Yuntab aka Cobalt SP500. When running the batch file, I received the following: failed, failed, failed after every Press Any Key to Continue message. Now, I am using Windows 7 under the 64-bit architecture. Is this possibly the reason?
Click to expand...
Click to collapse
Yes, to root Yuntab P500, you will have to use XP 32-bit.

have a p500, has dated rom post published here, such as making backup?
thanks

have yuntab p500 usb otg?

thanks for this, sadly this method doesn't works from me.
searching I found a alternative, I tell about a site that posted a solution that I tested on my p500 and worked:
http://isytec.net/manual-video-root-yuntab-p500/
the bad thing is that the root program that it puts appears to be chinesse.... the right button is "OK" and from program can configure if allows or deny (all in chinesse) but works well
regards

hi,
has anybody successfully installed one of the firmwares from post # 1 ? thanks.

Yuntab p500
pogodancer said:
hi,
has anybody successfully installed one of the firmwares from post # 1 ? thanks.
Click to expand...
Click to collapse
HERE IS THE LATEST ROM FOR YUNTAB. I HAVE NEVA TRY IT COS I DONT HAVE ONE WITH ME.
YOU CAN DOWNLOAD IT FROM THE SITE BELOW. IT IS A JELLY BEAN 4.2
http://www.needrom.com/mobile/yuntab-p500/

muammil said:
HERE IS THE LATEST ROM FOR YUNTAB. I HAVE NEVA TRY IT COS I DONT HAVE ONE WITH ME.
YOU CAN DOWNLOAD IT FROM THE SITE BELOW. IT IS A JELLY BEAN 4.2
http://www.needrom.com/mobile/yuntab-p500/
Click to expand...
Click to collapse
Thanks but this is the same rom as linked in post 1. It is Android 4.0.4 ICS.
Another question: How can I install the Google Playstore on the phone. Playstore app is not installed in stockrom. Thanks.

ROOT & Playstore
Hi,
I have to add that I bought the Yuntab P500 on AliExpress for 70 USD. This is definetly the best low budget smartphone I ever had. The build quality is not like a Samsung's but it's OK. It has a big 5 inch screen :good: with a small viewing angle . It runs not bad with the 1 GHz single-core-CPU and 512 MB RAM . It has 8 GB ROM and the fast WCDMA :good:. The battery seems to be very good :victory:. I think it is not easy to find a device which is similar good for this price.
But unfortunately the Android 4.0.4 ICS system is not rooted and does not have Google Playstore installed .
Solution:
======
1. ROOT:
On the phone storage or in the firmware downloads (see the links in this thread) you find the Windows drivers in the folder "android4.0_usb_driver_32bit". These drivers work excellent on my Windows 7 32bit computer. Connecting the P500 with drivers installed it gives me 3 entries in the device manager (Android phone + Qualcomm COM-port + Qualcomm modem):
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
For rooting the P500 I tried the above mentioned "ICS Root Unlocker 1.0" and "RomasterSetup_3_2_8". But there was no success. But after that I was successfully rooting with "Root_with_Restore_by_Bin4ry_v31" from here: http://forum.xda-developers.com/showthread.php?t=1886460
2. GOOGLE PLAYSTORE:
As the "GoogleServicesFramework.apk" is already installed on the P500, I only downloaded a "MarketUpdater.apk" and a "Vending.apk" from the web. I put my "RootExplorer.apk" and the "MarketUpdater.apk" + "Vending.apk" to the internal storage. After installing RootExplorer I copied "MarketUpdater.apk" + "Vending.apk" into system/app and gave the same attributes to them just like the other apps have. After that I installed the "Vending.apk" and rebootet the P500. Playstore is working fine now - there was not any app that I could not find.
Have fun with this nice phone !
Summary to the P500: I you can root and install the playstore or if you have somebody to do this for you, this phone is a great deal for 70 USD. Earlier I had a 4-inch-phone with a Spreadtrum SC6820 SOC without WCDMA and a faked Android 4 for 50 USD, which was a bad Android phone. After that I had an 4-inch MTK6572 device without WCDMA and only 256RAM/512ROM and Android 4.2 for 60 USD which was better but to weak with RAM and ROM. And now I have the P500 for 70 USD. Here everything sticks together very fine to be a good smartphone which is worth each cent. So if you want a cheap phone and you see the P500 for this price, don't hesitate to buy.

freegoat said:
Luckily, I found Karbonn A15 is similar to Yuntab P500, so followed ntstatic's instruction to have another try.
I followed the following steps to use Android Root Unlock, DON'T try anything else including A15 driver, it may BRICK your phone!
[...]
BIN format and the updating tool: P500W_1.0.623_20120908_SHIP & Porter
Click to expand...
Click to collapse
I recently got my YunTab P500, but the primary camera is not working. When starting any Camera-App I always get the commonly known "Can't connect to Camera"-Error. I think I tried nearly every solution one could imagine:
- do ota-update
- do bin update
- empty camera cache
- install alternate camera applications
- factory reset
- empty cache via factory recovery
- set permissions for the camera-app
- use JB-Camera and change cameras (though this worked: after restarting the camera app, I got the video-phone-camera)
So far nothing worked for me. I think the most simple solution would be, to send in the mobile and get my money back. Sadly the seller doesn't answer my support requests - I think he's gone.
I think asking here is my last chance to find someone to help me. Estimating this is no hardware-bug I think theres only one solution:
The installed kernel doesn't come with the proper instructions for the camera. This would be a proper explanation, if the Bin-Update doesn't come with the kernel image (which I dont know).
You, freegoat, mention not to use anything from a15/W719 roms. Did you try that or is it only a general suggestion? If you tried: What was the result? Because in the a15-Thread they've got boot.img (which as far as I know usually includes the kernel)...
Thank you for your help,
Boredland

pogodancer said:
Hi,
I have to add that I bought the Yuntab P500 on AliExpress for 70 USD. This is definetly the best low budget smartphone I ever had. The build quality is not like a Samsung's but it's OK. It has a big 5 inch screen :good: with a small viewing angle . It runs not bad with the 1 GHz single-core-CPU and 512 MB RAM . It has 8 GB ROM and the fast WCDMA :good:. The battery seems to be very good :victory:. I think it is not easy to find a device which is similar good for this price.
But unfortunately the Android 4.0.4 ICS system is not rooted and does not have Google Playstore installed .
Solution:
======
1. ROOT:
On the phone storage or in the firmware downloads (see the links in this thread) you find the Windows drivers in the folder "android4.0_usb_driver_32bit". These drivers work excellent on my Windows 7 32bit computer. Connecting the P500 with drivers installed it gives me 3 entries in the device manager (Android phone + Qualcomm COM-port + Qualcomm modem):
For rooting the P500 I tried the above mentioned "ICS Root Unlocker 1.0" and "RomasterSetup_3_2_8". But there was no success. But after that I was successfully rooting with "Root_with_Restore_by_Bin4ry_v31" from here: http://forum.xda-developers.com/showthread.php?t=1886460
2. GOOGLE PLAYSTORE:
As the "GoogleServicesFramework.apk" is already installed on the P500, I only downloaded a "MarketUpdater.apk" and a "Vending.apk" from the web. I put my "RootExplorer.apk" and the "MarketUpdater.apk" + "Vending.apk" to the internal storage. After installing RootExplorer I copied "MarketUpdater.apk" + "Vending.apk" into system/app and gave the same attributes to them just like the other apps have. After that I installed the "Vending.apk" and rebootet the P500. Playstore is working fine now - there was not any app that I could not find.
Have fun with this nice phone !
Summary to the P500: I you can root and install the playstore or if you have somebody to do this for you, this phone is a great deal for 70 USD. Earlier I had a 4-inch-phone with a Spreadtrum SC6820 SOC without WCDMA and a faked Android 4 for 50 USD, which was a bad Android phone. After that I had an 4-inch MTK6572 device without WCDMA and only 256RAM/512ROM and Android 4.2 for 60 USD which was better but to weak with RAM and ROM. And now I have the P500 for 70 USD. Here everything sticks together very fine to be a good smartphone which is worth each cent. So if you want a cheap phone and you see the P500 for this price, don't hesitate to buy.
Click to expand...
Click to collapse
i was able to port the google play but how can i port CWM on the phone. is there any windows app or tool i can use to make my own CWM?
THANKS

@ muammil
Sorry but I don't have a working CWRM. If you are successfully it would be nice to post your solution. Thanks.
Sent from my Q6000 / Jelly Bean 4.2.1 using Tapatalk 4

Porting playstore on yuntab p500
pogodancer said:
@ muammil
Sorry but I don't have a working CWRM. If you are successfully it would be nice to post your solution. Thanks.
Sent from my Q6000 / Jelly Bean 4.2.1 using Tapatalk 4
Click to expand...
Click to collapse
AFTER I SUCESSFULLY ROOTED MY PHONE. I DOWNLOADED THE BELOW APPS
---------GOOGLE SERVICE.APK,
------------------------------------------------GOOGLEPLAY 4.1.10.APK
------------------------------------------------------------------------------------------LINK2SD.APK
-I FIRST INSTALL LINK2SD AND REBOOT THE PHONE
--I NOW INSTALL GOOGLE SERVICE AND LASTLY INSTALL GOOGLEPLAY.
---I OPEN LINK2SD
----SCROLL DOWN TO GOOGLE PLAYSTORE AND CLICK ON IT
-----TOUCH THE ACTION BUTTON AND SELECT CONVERT TO SYSTEM APP
------WAIT FOR IT TO FINISH THEN REBOOT AND ENJOY
IF IT HELP THEN THUMPS UP:good:

I thought you could post your success when you find a clockwork recovery. I wrote already how to install the playstore.
Sent from my Q6000 / Jelly Bean 4.2.1 using Tapatalk 4

^pogodancer
FOR THE CWM I HAVE NO IDEA WHERE TO START THATS Y I ASKED U IF THERE IS A TOOL. BUT WILL KEEP SEARCHING & IF SUCESSFULL I WILL POST IT HERE.
THANKS
---------- Post added at 09:09 AM ---------- Previous post was at 08:38 AM ----------
IM NOT A PROGRAMMER NOR DO I KNOW HOW TO USE LINUX CODE. BUT IF ANY1 CAN GUIDE ME I WILL APPRECIATE.
DOING MY RESEARCH I COME ACROSS THISWHICH IS A GUIDE ON HOW TO MAKE A CUSTOM RECOVERY FOR ANY DEVICE. BUT THE PROBLEM I HAVE HERE IS IM NOT A PROGRAMMER. CAN ANY1 HELP OUT. I CAN PROVIDE HIM WITH ALL THE PHONE IMAGE FILES HE NEEDS.
CHEERS

[Guide][ROOT] Zen Ultrafone 701HD simplest Method!!

Here is a step by step method for to root the Zen ultrafone 701HD.
I've Tested it on my own Phone....It Works..
This is just a compilation of the resources already available on various threads in XDA..
All credits to the original developers...
I take DO NOT responsibility for any damages - It worked on my phone, no reason it should
not work on the other 701HDs out there..
STEP 1 - ACTIVATE DEVELOPER OPTIONS ON YOUR PHONE:-
Go to the Settings menu
Scroll down and tap on the About Phone button
Scroll down until you see Build number and tap on that repeatedly
After tapping the Build number button a few times it says " you are now a developer!"
You have successfully activated Developer Options.
Now go to developer options and activate USB Debugging
STEP 2 - INSTALL PHONE DRIVERS
Connect your phone to your computer via USB.
Go to control panel -> device manager after a few minutes
Right click on Zen Ultrafone and update drivers ... required drivers are attached below.
Your device manager should not normally have any unrecognized hardware after this step. ( see attached Image).
The"Android Composite ADB Interface" MUST be listed by now... if not recheck your steps again.
Disconnect and restart your phone and your computer and make sure it stays that way.
STEP 3 - TIME TO ROOT!!
Extract the files in the archive Zen 701HD.rar in any place convenient.
Open the extracted folder.
Right click on the file Run.bat and choose "Run As Administrator"
Connect your phone Via USB now if not yet connected.
Follow the on screen instructions... (next to none.. so not explained)
Do NOT disconnect your phone during the process
Enjoy your Rooted phone!!

[UPDATE]
My friends have confirmed that this rooting method is working on Micromax a116 and Xolo q800...

I have successfully ported CWM touch for the 701HD......
Need help making ROMs...
Will post the CWM with a short tutorial ....
Hey people... instead of viewing the posts as a Mute spectator, you could atleast register and give SOME feedback please!!

OP, nice job helping people out there. But, it's Q&A section and it's likely that people will be more helped if you make that guide in Miscellaneous Android Development Section.
More people will find it there because they will look for it there only.
Just request a mod to move the guide in that section. :victory:

iamareebjamal said:
OP, nice job helping people out there. But, it's Q&A section and it's likely that people will be more helped if you make that guide in Miscellaneous Android Development Section.
More people will find it there because they will look for it there only.
Just request a mod to move the guide in that section. :victory:
Click to expand...
Click to collapse
I was not allowed to post in the development sections initially.......
The tutorial for CWM will surely come up there...
How do I request a MOD to shift this thread there??

dextrorotatrix said:
I was not allowed to post in the development sections initially.......
The tutorial for CWM will surely come up there...
How do I request a MOD to shift this thread there??
Click to expand...
Click to collapse
Click on that Orange Triangle on first post in thread and choose "Thread /Post Moving or Maintainance"
Request the mod politely in Subject to move the Thread in Miscellaneous Android Development Section for better knowledge of people and correcting sectioning

Did that, Thank you.

Check out my CWM recovery for this phone here
http://forum.xda-developers.com/showthread.php?t=2310759

worked in Spice MI 535 also
Worked this method in spice pinnacle pro also
dextrorotatrix said:
Here is a step by step method for to root the Zen ultrafone 701HD.
I've Tested it on my own Phone....It Works..
This is just a compilation of the resources already available on various threads in XDA..
All credits to the original developers...
I take DO NOT responsibility for any damages - It worked on my phone, no reason it should
not work on the other 701HDs out there..
STEP 1 - ACTIVATE DEVELOPER OPTIONS ON YOUR PHONE:-
Go to the Settings menu
Scroll down and tap on the About Phone button
Scroll down until you see Build number and tap on that repeatedly
After tapping the Build number button a few times it says " you are now a developer!"
You have successfully activated Developer Options.
Now go to developer options and activate USB Debugging
STEP 2 - INSTALL PHONE DRIVERS
Connect your phone to your computer via USB.
Go to control panel -> device manager after a few minutes
Right click on Zen Ultrafone and update drivers ... required drivers are attached below.
Your device manager should not normally have any unrecognized hardware after this step. ( see attached Image).
The"Android Composite ADB Interface" MUST be listed by now... if not recheck your steps again.
Disconnect and restart your phone and your computer and make sure it stays that way.
STEP 3 - TIME TO ROOT!!
Extract the files in the archive Zen 701HD.rar in any place convenient.
Open the extracted folder.
Right click on the file Run.bat and choose "Run As Administrator"
Connect your phone Via USB now if not yet connected.
Follow the on screen instructions... (next to none.. so not explained)
Do NOT disconnect your phone during the process
Enjoy your Rooted phone!!
Click to expand...
Click to collapse

how to root zen ultrfone 303
please tell me how to root zen u303.i have tried the method of u701hd but it is not successful.please tell me the method to root100% of my zen u303.

Could you post more about the phone and what went wrong when you tried the above method?
Sent from my ultrafone 701HD

Here is another guide - Root Zen Ultrafone 701 HD

Essentially same ...... Even the attached files are identical!!! With the batch file showing changes made by me what a great co-incidence!!!!

Darn it
Don't know why zen guys want to tarnish the already almost non existent reputation of theirs.
Impressed by my phone a friend ordered the 701 HD and it turns out defective. the same dreaded line on display !
Somehow even my reputation is at stake now among friends
Sent from my ultrafone 701HD using xda app-developers app

my post of Root... 16th May... and How to create custom rom... links
dextrorotatrix said:
Here is a step by step method for to root the Zen ultrafone 701HD.
I've Tested it on my own Phone....It Works..
This is just a compilation of the resources already available on various threads in XDA..
All credits to the original developers...
I take DO NOT responsibility for any damages - It worked on my phone, no reason it should
not work on the other 701HDs out there..
STEP 1 - ACTIVATE DEVELOPER OPTIONS ON YOUR PHONE:-
Go to the Settings menu
Scroll down and tap on the About Phone button
Scroll down until you see Build number and tap on that repeatedly
After tapping the Build number button a few times it says " you are now a developer!"
You have successfully activated Developer Options.
Now go to developer options and activate USB Debugging
STEP 2 - INSTALL PHONE DRIVERS
Connect your phone to your computer via USB.
Go to control panel -> device manager after a few minutes
Right click on Zen Ultrafone and update drivers ... required drivers are attached below.
Your device manager should not normally have any unrecognized hardware after this step. ( see attached Image).
The"Android Composite ADB Interface" MUST be listed by now... if not recheck your steps again.
Disconnect and restart your phone and your computer and make sure it stays that way.
STEP 3 - TIME TO ROOT!!
Extract the files in the archive Zen 701HD.rar in any place convenient.
Open the extracted folder.
Right click on the file Run.bat and choose "Run As Administrator"
Connect your phone Via USB now if not yet connected.
Follow the on screen instructions... (next to none.. so not explained)
Do NOT disconnect your phone during the process
Enjoy your Rooted phone!!
Click to expand...
Click to collapse
Below is my post... first one... How to root ZEN HD701....
http://forum.xda-developers.com/showthread.php?t=2281142
[GUIDE] [how to] CREATE OWN ROM [FOR ANY ANDROID DEVICE] [FOR N00B] [EASIEST METHODS...
http://forum.xda-developers.com/showthread.php?t=1801690
Enjoy!!!

Great!!! Defy rooted the phone before me.... I can acknowledge that :thumbup:

Thanks...
dextrorotatrix said:
Great!!! Defy rooted the phone before me.... I can acknowledge that :thumbup:
Click to expand...
Click to collapse
I tried to port Canva4HD from MMX 116 but failed.....
can someone try it... i have requested same from fandroid7.... lets see.... check CANVA4HD rom.. it is awesome...

So theres a good news guys
am a Semi Developer ... i recently bought Zen701 HD
Lemme first give you guys a SHORT intro of mine
Am music.soul ( my xda name - you can see)
I have compiled paranoid for Xperia Neo v
made a rom for Galaxy Grand - Cryogate Rom
and I founded a team named TEAMCOOPER a developing team for Galaxy Ace ..
Themed many things
Wrote up a tutorial to Theme your statusbar and to make a draw9patch
okay! now what i am thinking is .. i'll soon be rooting this Zen701 HD and install up CWM
then ... would make a TRIAL rom includes Small Tweaks for performance and Battery ))))
Cheers and Enjoy! ))

Cool man.... Was waiting for someone who'd make a ROM. Fandroid was interested once but has since canceled his zen purchase and bought a lava....

Wow.thats good news
BTW is possible to add WiFi tweaks ?
And also . is there a good music quality enhancing app ? The default player lacks the punch
Sent from my ultrafone 701HD using xda app-developers app

[Miro, Tipo (/Dual), J, E (/Dual)] Root any Xperia Device | Added E Support

For all Xperia Devices.
Compatible with (any firmware of these devices):
√ Xperia J (ST26i)
√ Xperia Tipo(Dual) (ST21i/2)
√ Xperia Miro (ST23i)
√ Xperia E (Dual) (C150x/C160x)​
Requirements:
√ Your phone and an USB Cable
√ Sony PC Companion or Microsoft MTP Driver
√ Downloaded Rooting Toolkit​
Instructions:
Download Rooting Toolkit: Mod Edit: Link removed due to using pay per click's site
Extract it to a folder
Make sure you can run ADB commands on your device [i.e. You have ADB Drivers] (this is a mandatory requirement for any rooter)
Open RUNME1.bat
Now press Enter, at exploit selection screen choose Motochopper if that doesn't work for you (as in case of J & E) then restart device and RUNME1.bat and this time select pref_event
Simply follow on-screen instructions (press enter, etc.)
Done!
Why not UnlockRoot?
√ Smaller Download Size
√ An All-In-One Solution (i.e. it works for Tipo, Miro, Sola, J, E, in fact almost all Xperia Devices)
√ More detailed
√ Always open to add more root exploits (making sure all firmware compatibility)
√ SuperSU and BusyBox
√ No install blah-blah app nags
√ No ads (which we hate most)
√ No redirects to URLs​What to make sure before complaining here?
- ADB is up & running with drivers
- You are using Android
- You have a Windows PC/Laptop
- Try to provide as much detail as possible​

Frequently Asked Questions
Q.: The script is stuck at "* daemon started succesfully *" after connecting my Xperia?
A.: ADB Drivers are not installed or USB Debugging is not enabled (enable USB Debugging:
Settings > Apps > Development
) ​
Hall of Fame (Credits):
DooMLoRD
djrbliss
Android Revolutionary Team
Report if more.. Thanks everybody
Thread Changelog:
Added Xperia E Support (Framaroot)
​

Not a success on my E
[*] Waiting for device...
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
[*] Device found.
[*] Pushing exploit...
2975 KB/s (1283460 bytes in 0.421s)
[*] Pushing root tools...
3012 KB/s (96260 bytes in 0.031s)
2966 KB/s (853044 bytes in 0.280s)
2982 KB/s (1858064 bytes in 0.608s)
pkg: /data/local/tmp/Superuser.apk
Success
[*] Rooting phone...
[+] This may take a few minutes.
Click to expand...
Click to collapse
This is what im at..
I had waited for more than 15 minutes.
But no success.
It installs SU but when cliked on su app, Its say "binary not installed this is a problem" and app closes.
Device: Xperia E (c1504)
Firmware:11.3.A.0.59
Tried with pref_event after restarting but it said device not supported and it showed list of supported devices.
Log shown:
Device detected: C1504 (11.3.A.0.59)
C1504 (11.3.A.0.59) is not supported.
You need to manage to get remap_pfn_range addresses.
[*] Cleaning up...
[*] Exploit complete. Press Enter to reboot and exit.

pravinb89 said:
This is what im at..
I had waited for more than 15 minutes.
But no success.
It installs SU but when cliked on su app, Its say "binary not installed this is a problem" and app closes.
Device: Xperia E (c1504)
Firmware:11.3.A.0.59
Tried with pref_event after restarting but it said device not supported and it showed list of supported devices.
Log shown:
Device detected: C1504 (11.3.A.0.59)
C1504 (11.3.A.0.59) is not supported.
You need to manage to get remap_pfn_range addresses.
[*] Cleaning up...
[*] Exploit complete. Press Enter to reboot and exit.
Click to expand...
Click to collapse
Please try pref_event again and send a screenshot OR if you have rooted your device using some other stuff, please report.
Thanks for cooperating

Yash98 said:
Please try pref_event again and send a screenshot OR if you have rooted your device using some other stuff, please report.
Thanks for cooperating
Click to expand...
Click to collapse
Rooted Xperia E ( 11.3.A.0.59 ) by using Framaroot app's Gandalf script.
Link to OP--> http://forum.xda-developers.com/showthread.php?t=2130276

Asks to get Remap_pfn_address. firmware version is 11.3.a.2.23
Xperia E C1504
Sent from my C1504 using xda app-developers app

Try the link that I have posted above your post..
Sent from my MT11i using xda app-developers app

It doesnt work for me with Xperia J, root exploit prev_event on Windows 8.1, ADB drivers and Micrsoft MTP Drivers installed, any help?
Android 4.1.2 Build 11.2.A.0.31
The script lags at "daemon started successfully"

Framaroot doesn't work after update. Already tried it.
Sent from my C1504 using xda app-developers app

Acceleracer said:
It doesnt work for me with Xperia J, root exploit prev_event on Windows 8.1, ADB drivers and Micrsoft MTP Drivers installed, any help?
Android 4.1.2 Build 11.2.A.0.31
The script lags at "daemon started successfully"
Click to expand...
Click to collapse
For me it also didn't work when I tried on a windows 7 64bit, then I tried with a 32bit and it worked perfectly.

Acceleracer said:
It doesnt work for me with Xperia J, root exploit prev_event on Windows 8.1, ADB drivers and Micrsoft MTP Drivers installed, any help?
Android 4.1.2 Build 11.2.A.0.31
The script lags at "daemon started successfully"
Click to expand...
Click to collapse
I've had a similar problem with Windows 8.1 its the culprit! No drivers are working on Windows 8.1 for our devices so try with less than Windows 8.1 it will work
and the next version of root exploit will contain framaroot!

you have copied the work done by many devs into this "tool" and just put ur name on it without even crediting any of the dev's work involved in making each and every one of these exploits possible...
i can speak on behalf of the spent MONTHS adding support for each and every possible firmware of these devices and you just copy-pasted our work without permission and without even having the courtesy to acknowledge our work...."]devs working on the perf_event exploit binary[/URL] which u use here... we have spent MONTHS adding support for each and every possible firmware of these devices and you just copy-pasted our work without permission and without even having the courtesy to acknowledge our work....
kindly credit all the devs whose work you are using in this "tool" else your thread will be reported to the mods...

DooMLoRD said:
you have copied the work done by many devs into this "tool" and just put ur name on it without even crediting any of the dev's work involved in making each and every one of these exploits possible...
i can speak on behalf of the spent MONTHS adding support for each and every possible firmware of these devices and you just copy-pasted our work without permission and without even having the courtesy to acknowledge our work...."]devs working on the perf_event exploit binary[/URL] which u use here... we have spent MONTHS adding support for each and every possible firmware of these devices and you just copy-pasted our work without permission and without even having the courtesy to acknowledge our work....
kindly credit all the devs whose work you are using in this "tool" else your thread will be reported to the mods...
Click to expand...
Click to collapse
Yeah sure! and also sorry! I forgot!

Thread Changelog:
Added Xperia XE/E Rooting Support

Thread Changelog:
Added Xperia XE/E Rooting Support

Framaroot (neither Aragorn nor Gandalf) does not work on Sony Xperia E Dual (~C1605) running 11.3.A.1.39 (~4.1.1). So how to active the root account please?

Anyone here manage to root Xperia J running Android 4.1.2 with firmware version 11.2.A.0.31?
Sent from my ST26i

Yes I have rooted my xperia j
Sent from my ST26i using xda premium

prachetas13 said:
Yes I have rooted my xperia j
Sent from my ST26i using xda premium
Click to expand...
Click to collapse
Could you share with me on how you did it? Thank you in advance.

email.filtering said:
Framaroot (neither Aragorn nor Gandalf) does not work on Sony Xperia E Dual (~C1605) running 11.3.A.1.39 (~4.1.1). So how to active the root account please?
Click to expand...
Click to collapse
Kingo Android ROOT - 100% working

[Lava Magnum X604 Rooting Guide & General Discussion]

[ Lava Magnum X604 Rooting Guide & General Discussion ]​
Key Features:
Lava Magnum X604 is a Smart Phone Powered by 6.00-inch HD 720x1280 pixels with 245 Pixels per inch (PPI) display,Android 4.4 KitKat,8 MP Auto Focus with with BSI Sensor for low light imaging and Broadcom 1.2GHz Quad Core processor coupled with Videocore IV GPU alongside 1GB RAM.
​
Rooting & Unlocking:
Code:
[B][SIZE="4"][COLOR="DarkRed"]Before You Begin[/COLOR][/SIZE][/B]
1. This will void the warranty of your device. We won’t be held responsible if you end-up bricking or damaging your device. Do it at your own risk.
2. This should only work on Windows based PCs Preferably Windows-7
3. There should be at least 65% charge in your
4. Make a Backup of Your Contacts,SMS,And Whats App data in SD Card
Code:
[B][SIZE="5"][COLOR="DarkRed"]Downloading Required Files:[/COLOR][/SIZE][/B]
Download Lava Magnum X-604 Root Toolkit [B][URL="https://drive.google.com/file/d/0B7OdRw3ALPgGdWcxOUx0c0llMGs/edit?usp=sharing"]Click Here To Download[/URL][/B]
Code:
[B][SIZE="5"][COLOR="DarkRed"]Preparing Your Windows PC And Magnum X604 for Rooting:[/COLOR][/SIZE][/B]
Extract Downloaded Lava Magnum X604 Root Tool Kit to your Windows PC Desktop
Go to Settings >> Backup & Reset >> Factory data Reset in your Lava Magnum X-604 and Do a factory data Reset and Complete setups after it re-boots
Enable USB Debugging On your Device You can find this option in Settings >>Developer Option >>USB Debugging.
Enable Allow Installation of Apps from Unknown Sources under Settings >> Security >> Unknown Sources also Disable verify apps bellow Unknown Sources
Now Connect your device via USB cable to windows PC and Start installing programs which is provided in tool kit in same order
1.) Adb Driver Installer 2) BRCM_Driver_Package 3.)For Windows x64 Bit/For Windows x32 Bit 4.)VRoot_1.7.8.7753_Setup
Code:
[SIZE="5"][COLOR="DarkRed"][B]Rooting :[/COLOR][/SIZE][/B]
Open installed V-Root Program and Grant USB Debugging Authorization when a pop-up pops in your device Remember to tick always allow option.
When connection is established between V-Root program and your device it will display your device model and Root Button in Opened V-Root Program
If You See Green Colored Root button in V-Root Program Just click it and Wait silently with out touching your device .After some Times Your
Device will reboot (Remember Don't Disconnect USB cable until and Unless V-Root Program show success in your PC )
When you see Success message in PC remove USB Cable and Reboot Your Phone
Now Your Lava Magnum X604 is Rooted
For more Development visit this thread
http://forum.xda-developers.com/showthread.php?t=2875274
If you guys have any doubt regarding This particular device please drop a comment here in this thread I will try to clear it to my best of knowledge...
Please Don't say thanks in words Simply press Thanks Button Which is more Meaning full?
The-Immortal.

Thanks a ton man
Thanks man, this is great. I was desperately in need of this. Will try this over the weekend and let you know if i have any issues.
Looks like you have completed the rooting on your phone, any tips on steps to optimize the phone after the rooting. Its pretty laggy for a 1.2Ghz quad core processor, not sure why? I am planning to remove all the bloatware, and see if i can increase system space for apps. Besides that any further suggestions to improve the speed and responsiveness, that can be achieved by rooting or otherwise?
The-Immortal said:
[ Lava Magnum X604 Rooting Guide & General Discussion ]​
Key Features:
Lava Magnum X604 is a Smart Phone Powered by 6.00-inch HD 720x1280 pixels with 245 Pixels per inch (PPI) display,Android 4.4 KitKat,8 MP Auto Focus with with BSI Sensor for low light imaging and Broadcom 1.2GHz Quad Core processor coupled with Videocore IV GPU alongside 1GB RAM.
​
Rooting & Unlocking:
Code:
[B][SIZE="4"][COLOR="DarkRed"]Before You Begin[/COLOR][/SIZE][/B]
1. This will void the warranty of your device. We won’t be held responsible if you end-up bricking or damaging your device. Do it at your own risk.
2. This should only work on Windows based PCs Preferably Windows-7
3. There should be at least 65% charge in your
4. Make a Backup of Your Contacts,SMS,And Whats App data in SD Card
Code:
[B][SIZE="5"][COLOR="DarkRed"]Downloading Required Files:[/COLOR][/SIZE][/B]
Download Lava Magnum X-604 Root Toolkit [B][URL="https://drive.google.com/file/d/0B7OdRw3ALPgGdWcxOUx0c0llMGs/edit?usp=sharing"]Click Here To Download[/URL][/B]
Code:
[B][SIZE="5"][COLOR="DarkRed"]Preparing Your Windows PC And Magnum X604 for Rooting:[/COLOR][/SIZE][/B]
Extract Downloaded Lava Magnum X604 Root Tool Kit to your Windows PC Desktop
Go to Settings >> Backup & Reset >> Factory data Reset in your Lava Magnum X-604 and Do a factory data Reset and Complete setups after it re-boots
Enable USB Debugging On your Device You can find this option in Settings >>Developer Option >>USB Debugging.
Enable Allow Installation of Apps from Unknown Sources under Settings >> Security >> Unknown Sources also Disable verify apps bellow Unknown Sources
Now Connect your device via USB cable to windows PC and Start installing programs which is provided in tool kit in same order
1.) Adb Driver Installer 2) BRCM_Driver_Package 3.)For Windows x64 Bit/For Windows x32 Bit 4.)VRoot_1.7.8.7753_Setup
Code:
[SIZE="5"][COLOR="DarkRed"][B]Rooting :[/COLOR][/SIZE][/B]
Open installed V-Root Program and Grant USB Debugging Authorization when a pop-up pops in your device Remember to tick always allow option.
When connection is established between V-Root program and your device it will display your device model and Root Button in Opened V-Root Program
If You See Green Colored Root button in V-Root Program Just click it and Wait silently with out touching your device .After some Times Your
Device will reboot (Remember Don't Disconnect USB cable until and Unless V-Root Program show success in your PC )
When you see Success message in PC remove USB Cable and Reboot Your Phone
Now Your Lava Magnum X604 is Rooted
For more Development visit this thread
http://forum.xda-developers.com/showthread.php?t=2875274
If you guys have any doubt regarding This particular device please drop a comment here in this thread I will try to clear it to my best of knowledge...
The-Immortal.
Click to expand...
Click to collapse

boysha8 said:
Thanks man, this is great. I was desperately in need of this. Will try this over the weekend and let you know if i have any issues.
Looks like you have completed the rooting on your phone, any tips on steps to optimize the phone after the rooting. Its pretty laggy for a 1.2Ghz quad core processor, not sure why? I am planning to remove all the bloatware, and see if i can increase system space for apps. Besides that any further suggestions to improve the speed and responsiveness, that can be achieved by rooting or otherwise?
Click to expand...
Click to collapse
Ya you are 100% correct device is laggy out of box because of unwanted bloats and scraps provided by lava as system application ...
Major problem I have seen in device is the default volume level in headset is not at all up to the mark and also the software is not good enough ...
Its clear the mentality of lava is only to push devices to market and achieve their business target. They r not bothered about customer support,updates,and GPL also...
You can refer this thread which I have provided some steps to make default ROM faster .
http://forum.xda-developers.com/showthread.php?t=2875274
Removing unwanted apps listed by me will definitely help you to increase system memory along with lag reduction ..
I will post a SElinux enabled busybox so that we can enable SElinux. Like this.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Also you can try the Fly-On mod to optimise more once you have installed busybox and init.d support ...
I have contacted some of developers to compile CWM Recovery but it seems take a bit time to port it for breadcom chip set
Once this job is done I will be able to produce some custom ROMs as per our requirement .[emoji6]
Sent from my x604 using Tapatalk

unable to download the file keep on getting Sorry, you can't view or download this file at this time.
Too many users have viewed or downloaded this file recently. Please try accessing the file again later. If the file you are trying to access is particularly large or is shared with many people, it may take up to 24 hours to be able to view or download the file. If you still can't access a file after 24 hours, contact your domain administrator. error.

yogii111 said:
unable to download the file keep on getting Sorry, you can't view or download this file at this time.
Too many users have viewed or downloaded this file recently. Please try accessing the file again later. If the file you are trying to access is particularly large or is shared with many people, it may take up to 24 hours to be able to view or download the file. If you still can't access a file after 24 hours, contact your domain administrator. error.
Click to expand...
Click to collapse
Simple its google limitations.....
In India try to download between 11am to 2.30pm ....
Who ever downloaded contact me to make a mirror [emoji12]
It will help other users too....
Sent from my x604 using Tapatalk

Not able to root x604
The-Immortal said:
[ Lava Magnum X604 Rooting Guide & General Discussion ]​
Key Features:
Lava Magnum X604 is a Smart Phone Powered by 6.00-inch HD 720x1280 pixels with 245 Pixels per inch (PPI) display,Android 4.4 KitKat,8 MP Auto Focus with with BSI Sensor for low light imaging and Broadcom 1.2GHz Quad Core processor coupled with Videocore IV GPU alongside 1GB RAM.
​
Rooting & Unlocking:
Code:
[B][SIZE="4"][COLOR="DarkRed"]Before You Begin[/COLOR][/SIZE][/B]
1. This will void the warranty of your device. We won’t be held responsible if you end-up bricking or damaging your device. Do it at your own risk.
2. This should only work on Windows based PCs Preferably Windows-7
3. There should be at least 65% charge in your
4. Make a Backup of Your Contacts,SMS,And Whats App data in SD Card
Code:
[B][SIZE="5"][COLOR="DarkRed"]Downloading Required Files:[/COLOR][/SIZE][/B]
Download Lava Magnum X-604 Root Toolkit [B][URL="https://drive.google.com/file/d/0B7OdRw3ALPgGdWcxOUx0c0llMGs/edit?usp=sharing"]Click Here To Download[/URL][/B]
Code:
[B][SIZE="5"][COLOR="DarkRed"]Preparing Your Windows PC And Magnum X604 for Rooting:[/COLOR][/SIZE][/B]
Extract Downloaded Lava Magnum X604 Root Tool Kit to your Windows PC Desktop
Go to Settings >> Backup & Reset >> Factory data Reset in your Lava Magnum X-604 and Do a factory data Reset and Complete setups after it re-boots
Enable USB Debugging On your Device You can find this option in Settings >>Developer Option >>USB Debugging.
Enable Allow Installation of Apps from Unknown Sources under Settings >> Security >> Unknown Sources also Disable verify apps bellow Unknown Sources
Now Connect your device via USB cable to windows PC and Start installing programs which is provided in tool kit in same order
1.) Adb Driver Installer 2) BRCM_Driver_Package 3.)For Windows x64 Bit/For Windows x32 Bit 4.)VRoot_1.7.8.7753_Setup
Code:
[SIZE="5"][COLOR="DarkRed"][B]Rooting :[/COLOR][/SIZE][/B]
Open installed V-Root Program and Grant USB Debugging Authorization when a pop-up pops in your device Remember to tick always allow option.
When connection is established between V-Root program and your device it will display your device model and Root Button in Opened V-Root Program
If You See Green Colored Root button in V-Root Program Just click it and Wait silently with out touching your device .After some Times Your
Device will reboot (Remember Don't Disconnect USB cable until and Unless V-Root Program show success in your PC )
When you see Success message in PC remove USB Cable and Reboot Your Phone
Now Your Lava Magnum X604 is Rooted
For more Development visit this thread
http://forum.xda-developers.com/showthread.php?t=2875274
If you guys have any doubt regarding This particular device please drop a comment here in this thread I will try to clear it to my best of knowledge...
Please Don't say thanks in words Simply press Thanks Button Which is more Meaning full?
The-Immortal.
Click to expand...
Click to collapse
Hi, Immortal
I tried to root my x604 with the steps you described here, but not able to root it at all !
To hell with vRoot - can't understand those chinese junks ! Even if I have downloaded vRoot 1.7.3 english version, only few lines in english.
Irritation, irritation and irritation - nothing else !
Please suggest some other methods or ways, this one was completely disastrous for me !

vasantec said:
Hi, Immortal
I tried to root my x604 with the steps you described here, but not able to root it at all !
To hell with vRoot - can't understand those chinese junks ! Even if I have downloaded vRoot 1.7.3 english version, only few lines in english.
Irritation, irritation and irritation - nothing else !
Please suggest some other methods or ways, this one was completely disastrous for me !
Click to expand...
Click to collapse
Dude we have twrp + philz recovery so just flash it via adb and flash super user ....that's it all done .....
Sent from my A1 using Tapatalk

Memory problem
Hi i have to say thank to you. Recently i reviewed your article and i rooted my phone with help of your tutorial. But after rooted my internal memory comes to 1.63GB (Previously the internal memory was 5.2GB). Snapshot attached. Please help me on this.
Also can you please let me know how to upgrade my OS to lollipop. Awaiting reply for your reply.

sathish.vadivel said:
Hi i have to say thank to you. Recently i reviewed your article and i rooted my phone with help of your tutorial. But after rooted my internal memory comes to 1.63GB (Previously the internal memory was 5.2GB). Snapshot attached. Please help me on this.
Also can you please let me know how to upgrade my OS to lollipop. Awaiting reply for your reply.
Click to expand...
Click to collapse
@sathish.vadivel hey buddy did you manage to sort this out?
I don't understand how Lava can produce such a nice phone with such a lousy implementation of the OS.

xdababby said:
@sathish.vadivel hey buddy did you manage to sort this out?
I don't understand how Lava can produce such a nice phone with such a lousy implementation of the OS.
Click to expand...
Click to collapse
Please reply for me quotes. I'm waiting for your response.
---------- Post added at 03:15 AM ---------- Previous post was at 02:50 AM ----------
Hi i have to say thank to you. Recently i reviewed your article and i rooted my phone with help of your tutorial. But after rooted my internal memory comes to 1.63GB (Previously the internal memory was 5.2GB). Snapshot attached. Please help me on this.

X604 Not booting up
Sir
I did flashing of my Lava magnum X604 with Flashify app. With this tool i tried to flash the boot.img and recovery.img that is mentioned in this site. Now Neither my phone is not booting up nor it is going into recovery. When i press on the power button is vibrates and then nothing appears.
Please help....
:crying:

Intel Android Devices Root / Temp Recovery Session

Intel Android Devices Root / Temp Recovery Session
social-design-concepts said:
Disclaimer:
Before you proceed to the rooting instructions below, please read this disclaimer:
XDA-DEVELOPERS.COM and I are not responsible for what you are doing to your device. You understand and agree that you are doing this at your own risk.
as for warranty the rule of thumb is if you root you should always consider your warranty voided : i will make no claim otherwise on the subject.
i am just a simple hobbyist from Cinti. OH USA i have no intention to buy devices or users getting mad that they were under some impression this wouldn't void the warranty.
if you root you should always consider your warranty voided
Click to expand...
Click to collapse
Tethered Temporary CWM / TWRP Recovery Session :
Note : This is a Temporary CWM / TWRP Recovery Session for some Intel Devices with locked bootloaders.
This recovery is not installed to the devices and has to be launched from a computer ( tethered ) each time you need to access the CWM / TWRP Recovery. . .
WARNING : This Temporary CWM / TWRP Recovery Session is for some Intel Devices with locked boot loaders.
It is not intended for installing custom roms as if the devices has a locked bootloader the device will fail to boot the unsigned images
Intel Fastboot Tethered Temporary Recovery Session Launcher download :
Current Version : IntelAndroid-FBRL-07-24-2015.7z
Generic Instructions for use better instructions coming later just wanted to get the thread up :
notes :
make sure you have downloaded and installed the adb / fastboot drivers for your device . . .
make sure you have enabled developer options / adb debugging under settings on your device . . .
make sure you have download the latest : UPDATE-SuperSU-vX.Xx.zip and place it on your internal or external_sd
1 : download and extract IntelAndroid-FBRL-07-24-2015.7z some where on your computer.
2 : double click the launcher.bat file to start , type " ACCEPT " case sensitive without quotes to continue
check that the tool is reporting as either :
DEVICE STATUS: ADB-ONLINE
DEVICE STATUS: FASTBOOT-ONLINE
If " DEVICE STATUS: UNKNOWN " please check your cable connection and driver installation under Windows Device Manager
If " DEVICE STATUS: UNAUTHORIZED " please check if your devices is displaying an authorization prompt be sure to check Always allow from this computer and then press ok
3 : select the trigger to launch the Temporary CWM Recovery Session support fastboot oem triggers are :
T1 oem startftm ( very few devices support this command , but its the original used so )
devices supported : coming soon
T2 oem backup_factory ( limited devices support this command )
devices supported : coming soon
T3 oem stop_partitioning ( should work on alot of kitkat builds )
devices supported : coming soon
T4 oem stop_partitioning ( probably works on all devices that are supported (Jellybean , KitKat , Lollipop) )
devices supported : coming soon
4 : after selecting the trigger your device should reboot in to fastboot and begin to copy files to your device
note : if your device hangs at the waiting-for-device screen and you see droidboot CMD Waiting on your devices double check that the fastboot driver installed correctly.
note : if you see unknown oem command the trigger isn't supported by your device.
5 : The temporary cwm recovery session should be started at this point select install zip from the recovery menu using vol up / vol down to navigate and power to select
6 : select install zip from sdcard / external_sd depending on where you placed the file and select the UPDATE-SuperSU-vX.Xx.zip you downloaded earlier
7 : confirm the installation
8 : after install completes reboot your device
note :
some devices have limited space under /system and the supersu app wont install
if you don't see the supersu app on your device attempt to install it from the playstore
more than likely the su binary installed correctly but there want enough room on the device for the app.
This recovery uses the CWM Recovery @vampirefo built for the Dell Venue 8 3830 NoModem original thread : Dell Venue 8, CWM, unsecure boot/recovery
You know it's annoying to find this on so many other forums. with other people taking credit for it. sad face : (
APPRECIATE MY WORK, I DON'T DRINK, SO CLICK HERE DONATE NOW AND BUY ME COFFEE
XDA:DevDB Information
Intel Android FBRL, Tool/Utility for the Android General
Contributors
social-design-concepts
Version Information
Status: Stable
Created 2015-07-28
Last Updated 2015-07-28

Supported Devices List / Trigger
Supported Devices List / Trigger
Acer :
B1-730 T2
B1-730HD T2
A1-830
A1-840FHD T3
A1-840 (HD) T3
Asus :
ME170C T2 & T3
ME176C T2 & T3
Dell :
Venue 7 3730 / Venue 8 3830 All Triggers Should Work
Venue 7 3740 / Venue 8 3840 T3
Venue 7 3741 / T3
Venue 8 7840 T3
Iview :
i700 T2 & T3
Kurio :
Xtreme 7 Only had a chance to test trigger T3
Odys :
intellitab 7
Nabi:
Dreamtab model IN08A trigger T3 reported working
Prestigio :
MultiPad Thunder 7.0i
Tesla :
L7 Tablet T3
Tesco :
Op3n Dott 8 T2 & T3
Toshibia :
Excite 7 T3

Links to devices specific threads / forums
Links to devices specific threads / forums
If you have created a devices specific thread / forum for your devices please PM the link so that i can post a link to it here to make it easier to help new users . . . . Please put Intel Device Specific Thread in the supject . Thank You .

The Concept / Source Code
The Concept / Source Code

Collected Device Dumps / Captured OTA Updates
Collected Device Dumps / Captured OTA Updates

Generic / Tips for Unbricking
Generic / Tips for Unbricking

Ahh!
Just my luck lol. Had a feeling I would end up bricked for some reason, maybe I jinxed myself.
Anyways... everything was going ok, I selected trigger 3 to try first, reboots to droidboot (with "waiting for fastboot command") then I select recovery and get android dude laying down with a red exclamation point coming out his belly and it just said "no command" now I am soft bricked, only getting the USB symbal with the white line under it. Please help!

GeeKerGurL said:
Just my luck lol. Had a feeling I wouls end up beicked for some reason, maybe I jinxed myself.
Try to manually boot to droidboot
Anyways... everything was going ok, I selected trigger 3 to try first, reboots to droidboot (with "waiting for fastboot command") then I select recovery and get android dude laying down with a red exclamation point coming out his belly and it just said "no command" now I am soft bricked, only getting the USB symbal with the white line under it. Please help!
Click to expand...
Click to collapse
We can remote around 1130pm est and I'll get you running v8 correct?
Sent from my XT907 using XDA Free mobile app

social-design-concepts said:
We can remote around 1130pm est and I'll get you running v8 correct?
Sent from my XT907 using XDA Free mobile app
Click to expand...
Click to collapse
Yeah 3830. Thanks a bunch. Now what do I have to do to remote? I am on a win7 PC with 1gig that is so slow I wanna scream. Also I am in another timezone so how long would that be from now?

GeeKerGurL said:
Yeah 3830. Thanks a bunch. Now what do I have to do to remote? I am on a win7 PC with 1gig that is so slow I wanna scream. Also I am in another timezone so how long would that be from now?
Click to expand...
Click to collapse
1 hour 30 minutes
Sent from my XT907 using XDA Free mobile app

social-design-concepts said:
1 hour 30 minutes
Sent from my XT907 using XDA Free mobile app
Click to expand...
Click to collapse
Okie dokie. Ill be here.

social-design-concepts said:
We can remote around 1130pm est and I'll get you running v8 correct?
Sent from my XT907 using XDA Free mobile app
Click to expand...
Click to collapse
Woot!!!YA! no need, I got it back all by myself just had to boot with vol down and go back through the process and everything copied fine and worked this time! :good: thanks a ton for offering to help me though buddy!
BTW trigger 3 works for the 3830 V8 no modem
WOOOHOOOOHOOOOWOOOO! root check cleared, I am SOO happy to finally have root on this thing. Besides my minor hiccup for whatever reason this method was pie too! YAHOO. I went from about to cry to jumping around happy like a crazy person haha.

recovery fstab
What needs to be change for jb 4.2.2?
I am able to open and edit the file.
b.g.

whgarner said:
What needs to be change for jb 4.2.2?
I am able to open and edit the file.
b.g.
Click to expand...
Click to collapse
recovery.fstab may or may not need to be edited for some devices especially if the device doesn't use by label partitioning. What device do you have?
Sent from my XT907 using XDA Free mobile app

asus aa3-600
I have an asus aa3-600-ur10
android 4.2.2
Intel Celeron J1850 Quad-core 2 GHz
21.5" Full HD (1920 x 1080) 16:9
Intel HD Graphics with Shared Memory
2 GB, DDR3 SDRAM
500 GB HDD
The problem I'm having is no usb debugging, only debugging via lan. I can get adb to work but not working with fastboot in the bootloader(droidboot). I have a post about it in this section, search for "aa3-600"
b.g.

Hi, SDC
I know this has been ask before, I searched and couldn't find the answer though, I would like to get the source code for the launchers , I use the Linux version of this method, cause I don't have windows, and would like to convert the recovery.launcher triggers and so forth into a shell script rather that use binary file.
If you have a shell script already can you post it if not, can you post or give me a link to your binary files source code?

tomtom1265 said:
Hi, SDC
I know this has been ask before, I searched and couldn't find the answer though, I would like to get the source code for the launchers , I use the Linux version of this method, cause I don't have windows, and would like to convert the recovery.launcher triggers and so forth into a shell script rather that use binary file.
If you have a shell script already can you post it if not, can you post or give me a link to your binary files source code?
Click to expand...
Click to collapse
I'm going to post the source after I finish getting the thread put together I just wanted to get it up yesterday.
As for doing it through shell scripts the reason its binary is because if /system is mounted or any prebuilt binary has a dependency on a shared library it makes it extremely difficult some times impossible to stop services and unmount /system and such.
But I hope to have everything finish by the end of the day.
Sent from my XT907 using XDA Free mobile app

whgarner said:
I have an asus aa3-600-ur10
android 4.2.2
Intel Celeron J1850 Quad-core 2 GHz
21.5" Full HD (1920 x 1080) 16:9
Intel HD Graphics with Shared Memory
2 GB, DDR3 SDRAM
500 GB HDD
The problem I'm having is no usb debugging, only debugging via lan. I can get adb to work but not working with fastboot in the bootloader(droidboot). I have a post about it in this section, search for "aa3-600"
b.g.
Click to expand...
Click to collapse
You use Linux or windows? If Linux, you may need to use my fastboot binary, anyway if using Linux while in fastboot mode use terminal type lsusb.
Do you see your device listed?
Sent from my T1 using XDA Free mobile app

Root!
Thank you for this!
I successfully rooted my V8 3830 KK4.4 V1.33 no modem with T3 - in about 4 mins. tops.
FYI:
I connected and launched the launcher from the IntellAndroid-FBRL folder. Typed ACCEPT and got the green screen. Chose T3. The tablet rebooted into fastboot and files where loaded, But then fastboot turned red and said "device unauthorized" when CWM popped onto my tablet. (maybe it's suppose to do that, DK) and yes, US debugging was on, I flashed the SU zip, rebooted, all is well. SU updated and working fine. I was able to remove all the crapwear. :laugh:
thank you SDC!

Quick question - Do any of the intel devices have unlocked bootloader?? Thought I read somewhere somebody was able to install a factory 4.3 or 4.2 on a Dell venue and the bootloader unlocked?