Database Info

[GUIDE]Yuntab P500 (M5000) Rooting Guide and ROM

NOTE: The rooting method may have the potential to BRICK the phone and will void your warranty, so do it at your own RISK. I am not responsible for any problems caused by this guide..
I recently bought a Yuntab P500 PDA Smartphone 5 inch Screen Android. Here are its main features:
CPU: Qualcomm MSM7227a 1.0GHz / Adreno 200 GPU.
Display: 5.0 inch Mulititouch screen, 800 x 480px.
OS: Android 4.0 Ice Cream Sandwich.
Memory: 512MB RAM 8GB ROM.
Camera: Dual Cameras Back: 5MP, Front: 0.3MP.
Bluetooth 2.1 +EDR, Bluetooth stereo (A2DP).
I am very pleased with the phone but still wanted to root it. However, I found it is very hard to root the phone because there is lacking of information of it on the Internet.
Its driver files are included on the phone internal rom with a folder called 'android4.0_usb_driver_32bit'. Once you connect the phone with USB Debugging enabled, you will see a new CD drive, double click it and copy the whole folder to your computer.
However, Its driver is not working on my Windows 7 64 bit laptop, so I had to try my XP one and it took a while to install all drivers. Then I followed this instruction to try Root_with_Restore_by_Bin4ry, I got the message to say the phone was rooted but it was not working at all.
Luckily, I found Karbonn A15 is similar to Yuntab P500, so followed ntstatic's instruction to have another try.
I followed the following steps to use Android Root Unlock, DON'T try anything else including A15 driver, it may BRICK your phone!
1. Enable USB Debugging - Under SETTINGS - DEVELOPER OPTIONS
2. Install the drivers for the phone - copy drivers from your phone internal card.
3. download "Android Root Unlock" from sourceforge.net and extract it to a folder on your harddisk
4. navigate to the above folder and run the batch file ICS_Root_Unlocker.bat
the batch file will reboot your phone a couple of times and will wait with a message "Press Any Key to continue"
IMP NOTE : if you pc is saying "PRESS ANY KEY" note if your phone is on or rebooting....
if it is Rebooting, wait for it to start before pressing a key
5. After a couple of boots the phone will be rooted
6. verify that the Root is complete by observing a "Superuser" shortcut in the application list
Thanks for that guide, now my phone has been rooted successfully.
I hope this will help people like me. Good luck.
I got the ROM from a Chinese guy. I haven't tried them yet, so flash them at your OWN RISK as well.
OTA Zip format: P500W-ota-1.0.623_20120908.zip
BIN format and the updating tool: P500W_1.0.623_20120908_SHIP & Porter

In Response...
freegoat said:
NOTE: The rooting method may have the potential to BRICK the phone and will void your warranty, so do it at your own RISK. I am not responsible for any problems caused by this guide..
I recently bought a Yuntab P500 PDA Smartphone 5 inch Screen Android. Here are its main features:
CPU: Qualcomm MSM7227a 1.0GHz / Adreno 200 GPU.
Display: 5.0 inch Mulititouch screen, 800 x 480px.
OS: Android 4.0 Ice Cream Sandwich.
Memory: 512MB RAM 8GB ROM.
Camera: Dual Cameras Back: 5MP, Front: 0.3MP.
Bluetooth 2.1 +EDR, Bluetooth stereo (A2DP).
I am very pleased with the phone but still wanted to root it. However, I found it is very hard to root the phone because there is lacking of information of it on the Internet.
Its driver files are included on the phone internal rom with a folder called 'android4.0_usb_driver_32bit'. Once you connect the phone with USB Debugging enabled, you will see a new CD drive, double click it and copy the whole folder to your computer.
However, Its driver is not working on my Windows 7 64 bit laptop, so I had to try my XP one and it took a while to install all drivers. Then I followed this instruction to try Root_with_Restore_by_Bin4ry, I got the message to say the phone was rooted but it was not working at all.
Luckily, I found Karbonn A15 is similar to Yuntab P500, so followed ntstatic's instruction to have another try.
I followed the following steps to use Android Root Unlock, DON'T try anything else including A15 driver, it may BRICK your phone!
1. Enable USB Debugging - Under SETTINGS - DEVELOPER OPTIONS
2. Install the drivers for the phone - copy drivers from your phone internal card.
3. download "Android Root Unlock" from sourceforge.net and extract it to a folder on your harddisk
4. navigate to the above folder and run the batch file ICS_Root_Unlocker.bat
the batch file will reboot your phone a couple of times and will wait with a message "Press Any Key to continue"
IMP NOTE : if you pc is saying "PRESS ANY KEY" note if your phone is on or rebooting....
if it is Rebooting, wait for it to start before pressing a key
5. After a couple of boots the phone will be rooted
6. verify that the Root is complete by observing a "Superuser" shortcut in the application list
Thanks for that guide, now my phone has been rooted successfully.
I hope this will help people like me. Good luck.
Does anybody know where to obtain the ROM of the phone? Thanks in advance.
Click to expand...
Click to collapse
Thank you for all the work you've put into this project. Unfortunately for me, I am unable to root my Yuntab aka Cobalt SP500. When running the batch file, I received the following: failed, failed, failed after every Press Any Key to Continue message. Now, I am using Windows 7 under the 64-bit architecture. Is this possibly the reason?

dcsoul said:
Thank you for all the work you've put into this project. Unfortunately for me, I am unable to root my Yuntab aka Cobalt SP500. When running the batch file, I received the following: failed, failed, failed after every Press Any Key to Continue message. Now, I am using Windows 7 under the 64-bit architecture. Is this possibly the reason?
Click to expand...
Click to collapse
Yes, to root Yuntab P500, you will have to use XP 32-bit.

have a p500, has dated rom post published here, such as making backup?
thanks

have yuntab p500 usb otg?

thanks for this, sadly this method doesn't works from me.
searching I found a alternative, I tell about a site that posted a solution that I tested on my p500 and worked:
http://isytec.net/manual-video-root-yuntab-p500/
the bad thing is that the root program that it puts appears to be chinesse.... the right button is "OK" and from program can configure if allows or deny (all in chinesse) but works well
regards

hi,
has anybody successfully installed one of the firmwares from post # 1 ? thanks.

Yuntab p500
pogodancer said:
hi,
has anybody successfully installed one of the firmwares from post # 1 ? thanks.
Click to expand...
Click to collapse
HERE IS THE LATEST ROM FOR YUNTAB. I HAVE NEVA TRY IT COS I DONT HAVE ONE WITH ME.
YOU CAN DOWNLOAD IT FROM THE SITE BELOW. IT IS A JELLY BEAN 4.2
http://www.needrom.com/mobile/yuntab-p500/

muammil said:
HERE IS THE LATEST ROM FOR YUNTAB. I HAVE NEVA TRY IT COS I DONT HAVE ONE WITH ME.
YOU CAN DOWNLOAD IT FROM THE SITE BELOW. IT IS A JELLY BEAN 4.2
http://www.needrom.com/mobile/yuntab-p500/
Click to expand...
Click to collapse
Thanks but this is the same rom as linked in post 1. It is Android 4.0.4 ICS.
Another question: How can I install the Google Playstore on the phone. Playstore app is not installed in stockrom. Thanks.

ROOT & Playstore
Hi,
I have to add that I bought the Yuntab P500 on AliExpress for 70 USD. This is definetly the best low budget smartphone I ever had. The build quality is not like a Samsung's but it's OK. It has a big 5 inch screen :good: with a small viewing angle . It runs not bad with the 1 GHz single-core-CPU and 512 MB RAM . It has 8 GB ROM and the fast WCDMA :good:. The battery seems to be very good :victory:. I think it is not easy to find a device which is similar good for this price.
But unfortunately the Android 4.0.4 ICS system is not rooted and does not have Google Playstore installed .
Solution:
======
1. ROOT:
On the phone storage or in the firmware downloads (see the links in this thread) you find the Windows drivers in the folder "android4.0_usb_driver_32bit". These drivers work excellent on my Windows 7 32bit computer. Connecting the P500 with drivers installed it gives me 3 entries in the device manager (Android phone + Qualcomm COM-port + Qualcomm modem):
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
For rooting the P500 I tried the above mentioned "ICS Root Unlocker 1.0" and "RomasterSetup_3_2_8". But there was no success. But after that I was successfully rooting with "Root_with_Restore_by_Bin4ry_v31" from here: http://forum.xda-developers.com/showthread.php?t=1886460
2. GOOGLE PLAYSTORE:
As the "GoogleServicesFramework.apk" is already installed on the P500, I only downloaded a "MarketUpdater.apk" and a "Vending.apk" from the web. I put my "RootExplorer.apk" and the "MarketUpdater.apk" + "Vending.apk" to the internal storage. After installing RootExplorer I copied "MarketUpdater.apk" + "Vending.apk" into system/app and gave the same attributes to them just like the other apps have. After that I installed the "Vending.apk" and rebootet the P500. Playstore is working fine now - there was not any app that I could not find.
Have fun with this nice phone !
Summary to the P500: I you can root and install the playstore or if you have somebody to do this for you, this phone is a great deal for 70 USD. Earlier I had a 4-inch-phone with a Spreadtrum SC6820 SOC without WCDMA and a faked Android 4 for 50 USD, which was a bad Android phone. After that I had an 4-inch MTK6572 device without WCDMA and only 256RAM/512ROM and Android 4.2 for 60 USD which was better but to weak with RAM and ROM. And now I have the P500 for 70 USD. Here everything sticks together very fine to be a good smartphone which is worth each cent. So if you want a cheap phone and you see the P500 for this price, don't hesitate to buy.

freegoat said:
Luckily, I found Karbonn A15 is similar to Yuntab P500, so followed ntstatic's instruction to have another try.
I followed the following steps to use Android Root Unlock, DON'T try anything else including A15 driver, it may BRICK your phone!
[...]
BIN format and the updating tool: P500W_1.0.623_20120908_SHIP & Porter
Click to expand...
Click to collapse
I recently got my YunTab P500, but the primary camera is not working. When starting any Camera-App I always get the commonly known "Can't connect to Camera"-Error. I think I tried nearly every solution one could imagine:
- do ota-update
- do bin update
- empty camera cache
- install alternate camera applications
- factory reset
- empty cache via factory recovery
- set permissions for the camera-app
- use JB-Camera and change cameras (though this worked: after restarting the camera app, I got the video-phone-camera)
So far nothing worked for me. I think the most simple solution would be, to send in the mobile and get my money back. Sadly the seller doesn't answer my support requests - I think he's gone.
I think asking here is my last chance to find someone to help me. Estimating this is no hardware-bug I think theres only one solution:
The installed kernel doesn't come with the proper instructions for the camera. This would be a proper explanation, if the Bin-Update doesn't come with the kernel image (which I dont know).
You, freegoat, mention not to use anything from a15/W719 roms. Did you try that or is it only a general suggestion? If you tried: What was the result? Because in the a15-Thread they've got boot.img (which as far as I know usually includes the kernel)...
Thank you for your help,
Boredland

pogodancer said:
Hi,
I have to add that I bought the Yuntab P500 on AliExpress for 70 USD. This is definetly the best low budget smartphone I ever had. The build quality is not like a Samsung's but it's OK. It has a big 5 inch screen :good: with a small viewing angle . It runs not bad with the 1 GHz single-core-CPU and 512 MB RAM . It has 8 GB ROM and the fast WCDMA :good:. The battery seems to be very good :victory:. I think it is not easy to find a device which is similar good for this price.
But unfortunately the Android 4.0.4 ICS system is not rooted and does not have Google Playstore installed .
Solution:
======
1. ROOT:
On the phone storage or in the firmware downloads (see the links in this thread) you find the Windows drivers in the folder "android4.0_usb_driver_32bit". These drivers work excellent on my Windows 7 32bit computer. Connecting the P500 with drivers installed it gives me 3 entries in the device manager (Android phone + Qualcomm COM-port + Qualcomm modem):
For rooting the P500 I tried the above mentioned "ICS Root Unlocker 1.0" and "RomasterSetup_3_2_8". But there was no success. But after that I was successfully rooting with "Root_with_Restore_by_Bin4ry_v31" from here: http://forum.xda-developers.com/showthread.php?t=1886460
2. GOOGLE PLAYSTORE:
As the "GoogleServicesFramework.apk" is already installed on the P500, I only downloaded a "MarketUpdater.apk" and a "Vending.apk" from the web. I put my "RootExplorer.apk" and the "MarketUpdater.apk" + "Vending.apk" to the internal storage. After installing RootExplorer I copied "MarketUpdater.apk" + "Vending.apk" into system/app and gave the same attributes to them just like the other apps have. After that I installed the "Vending.apk" and rebootet the P500. Playstore is working fine now - there was not any app that I could not find.
Have fun with this nice phone !
Summary to the P500: I you can root and install the playstore or if you have somebody to do this for you, this phone is a great deal for 70 USD. Earlier I had a 4-inch-phone with a Spreadtrum SC6820 SOC without WCDMA and a faked Android 4 for 50 USD, which was a bad Android phone. After that I had an 4-inch MTK6572 device without WCDMA and only 256RAM/512ROM and Android 4.2 for 60 USD which was better but to weak with RAM and ROM. And now I have the P500 for 70 USD. Here everything sticks together very fine to be a good smartphone which is worth each cent. So if you want a cheap phone and you see the P500 for this price, don't hesitate to buy.
Click to expand...
Click to collapse
i was able to port the google play but how can i port CWM on the phone. is there any windows app or tool i can use to make my own CWM?
THANKS

@ muammil
Sorry but I don't have a working CWRM. If you are successfully it would be nice to post your solution. Thanks.
Sent from my Q6000 / Jelly Bean 4.2.1 using Tapatalk 4

Porting playstore on yuntab p500
pogodancer said:
@ muammil
Sorry but I don't have a working CWRM. If you are successfully it would be nice to post your solution. Thanks.
Sent from my Q6000 / Jelly Bean 4.2.1 using Tapatalk 4
Click to expand...
Click to collapse
AFTER I SUCESSFULLY ROOTED MY PHONE. I DOWNLOADED THE BELOW APPS
---------GOOGLE SERVICE.APK,
------------------------------------------------GOOGLEPLAY 4.1.10.APK
------------------------------------------------------------------------------------------LINK2SD.APK
-I FIRST INSTALL LINK2SD AND REBOOT THE PHONE
--I NOW INSTALL GOOGLE SERVICE AND LASTLY INSTALL GOOGLEPLAY.
---I OPEN LINK2SD
----SCROLL DOWN TO GOOGLE PLAYSTORE AND CLICK ON IT
-----TOUCH THE ACTION BUTTON AND SELECT CONVERT TO SYSTEM APP
------WAIT FOR IT TO FINISH THEN REBOOT AND ENJOY
IF IT HELP THEN THUMPS UP:good:

I thought you could post your success when you find a clockwork recovery. I wrote already how to install the playstore.
Sent from my Q6000 / Jelly Bean 4.2.1 using Tapatalk 4

^pogodancer
FOR THE CWM I HAVE NO IDEA WHERE TO START THATS Y I ASKED U IF THERE IS A TOOL. BUT WILL KEEP SEARCHING & IF SUCESSFULL I WILL POST IT HERE.
THANKS
---------- Post added at 09:09 AM ---------- Previous post was at 08:38 AM ----------
IM NOT A PROGRAMMER NOR DO I KNOW HOW TO USE LINUX CODE. BUT IF ANY1 CAN GUIDE ME I WILL APPRECIATE.
DOING MY RESEARCH I COME ACROSS THISWHICH IS A GUIDE ON HOW TO MAKE A CUSTOM RECOVERY FOR ANY DEVICE. BUT THE PROBLEM I HAVE HERE IS IM NOT A PROGRAMMER. CAN ANY1 HELP OUT. I CAN PROVIDE HIM WITH ALL THE PHONE IMAGE FILES HE NEEDS.
CHEERS

Micromax Funbook Infinity P275 - Development & Hacking

Micromax Funbook Infinity - P275​Development & Hacking​​​
HOT NEWS : CyanogenMod 10 or CM10 (Jellybean) is available for Funbook Infinity P275 and you can install from HERE​
This thread is dedicated to Micromax Funbook Infinity P275 as there is no specific forum for it. This deals with Root, CWM, Roms, Mods, etc. You may also share if you found something new about this device...
INDEX
|
|------- About Device
|------- Parts Of The Device
|------- Specifications (HW)
|------- Rooting/Unrooting
|------- CWM Recovery
|------- Installing ADB Drivers
|------- Mods & Apps
|------- LiveSuit Guide
|------- Roms
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Micromax Funbook Infinity P275 is a Android Full touch bar, based on the ARM Cortex-A8 architecture,collocation Android4.0.3 operating system.P275 provides MP3/MP4 player, camera, camcorder, voice memo. Built-in WiFi function, supports Web surfing and email, bring you perfect Internet, social, email and shopping experience. P275 supports connectivity as WIFI, T-flash card, UART and USB2.0 OTG
Specifications:
HardWare :
Design :
Dimension : 26x209x11.2 mm
Weight : 460g ( Including Battery )
Form Factor : Android Full Touch Bar
Antenna : FPC Antenna
LCD :
Display : 7”,800 x 480,TFT LCD, 16.7M Color
Panel type : Capacitive 5 Multi Touch
Camera :
Image Sensor : CMOS
Resolution : Front 0.3MP / Rear 0.3 MP
Focus : Front FF / Rear FF
Digital Zoom : x4
Optical Zoom : Non
Motion JPEG : Yes
Camcorder : Yes
Flash : No
Video :
Sound Format : Support up to HD 2160P; Support AVI, MPG, MKV, RM, RMVB, MP4, MOV, VOB, DAT, FLV, TS, 3GP, WEBM(VP8), etc. 1080p decoder
Video Steaming : RTSP/SDP over TCP; RTP/RTCP over UDP
Video output : Non
(HDMI)
Audio :
Sound Format - Encoding : Yes
Sound format - Decoding : MP1、MP2、MP3、WMA、WAV、OGG、OGA、APE、FLAC、AAC、M4A、3GP
Ringtones : Yes (64poly MIDI, MP3)
MP3 playback : Yes (up to VBR)
Voice Memo : Yes
External Audio Jack : 3.5mm
Audio amplifier - AWINIC : Yes
Memory :
DDR RAM : 512MB DDR3
Nand Flash : 4GB
MicroSD : Upto 32 GB
(T-flash)
Battery :
Standard 4,000mAh Li-ion
Extended Non
Connectivity :
RS232C : Non
USB 1 Mini : USB OTG,
IrDA : Non
IrRC : Non
Bluetooth : Non
Wi-fi 802.11: b/g/n
Other Options :
Travel charger Adapter : Yes
USB Data Cable : Yes
USB adapter : Yes
Ear – Microphone : No
Motion Sensor : Yes (3-axis supportable)
z

Rooting Funbook Infinity P275
Rooting & Unrooting Funbook Infinity P275
Android rooting is the process of allowing users of smartphones, tablets and other devices running android to attain privileged control (known as "root access") within Android's subsystem.
There are two methods for rooting our Funbook Infinity :
1) Root Many Android! by Bin4ry
2) Super One Click by CLShortFuse
Both are very easy methods, but I prefer using Universal Rooting Script by Bin4ry. However, I will post how to root in both methods!
Preparing Funbook Infinity For Rooting :
1) On your infinity tablet, go to Settings- -> Developers options and tap on USB debugging to check (tick) the USB debugging on.
2) Connect the Funbook Infinity with your Windows Computer via USB cable.
3) If it is the first time that you have connected your tablet to your computer, then allow windows to Automatically Install the Drivers for you.
4) Change the Connectivity Option from MTP to Mass Storage in Settings --> Storage --> Options --> USB computer connection
If the drivers are not installed automatically then you nedd to install them manually. Go to 3rd post for the guide on installing ADB drivers manually.
Note : Remove your SD Card from your Tab.
METHOD 1 :
Root Many Android! BY BIN4RY
1) Download Root_With_Restore_by_Bin4ry_v31 : HERE or HERE [OP LINK]
2) Extract & Double-Click RunMe.bat
3) Follow the instructions
4) Connect your tablet to the computer.
5) Then, the program will ask you to go to the tablet and
tap Restore My Data. Do it.
6) Wait till it finishes. Your tablet will restart once.
7) Once the program is done, press Enter.
8) Your Funbook Infinity will be rooted.
METHOD 2 :
Super One Click by CLShortFuse
Note : The program requires Microsoft .NET Framework 2.0+ or Mono v1.2.6+
1) Download SuperOneClick Root v2.3 : HERE [ORI LINK]
2) Open SuperOneClick.exe
3) Click the Root button and wait for a few minutes.
4) You can select Yes, if you would like to test it.
5) Your Funbook Infinity will be rooted.
Unroot Your Funbook Infinity:
i) Use Root_with_Restore_v31
Select the Unroot Option from the list.
ii) Use SuperOneClick
Click on Unroot on the SuperOneClick.exe window.
z

CWM Recovery 6 For Funbook Infinity P275
ClockWorkMod Recovery
Screenshots in updated CWM recovery:
Prerequisite :
Your Funbook Infinity Must Be Rooted In Order To Install CWM.
Credits to dolorespark for posting this.
1) Downlad CWM_6028_P275.zipfrom HERE [Dev-Host]
and Novo_Tools.apk from HERE
2) Put both Novo_Tools_1_0.apk and recovery.img in /sdcard of your Funbook Infinity.
3) Install Novo_Tools_1_0.apk as a normal app.
4) Open NovoTools and grant SU (SuperUser) permissions.
5) Click Flash Recovery in NovoTools and wait for few seconds.
6) Next Click Enter Recovery in NovoTools and You will go to CWM Recovery 6.0.2.8.
Note :
i) If You Want to Go To Recovery :
ii) Switch Off the Tab.
iii) Press and Hold Home And Power Keys at the same time.
or
Use Novo_Tools.(Enter Reocvery option)
Note : This updated CWM reocvery contains the *** Go Back *** option which favours devices like P275 which doesn't sport back or volume rocker button.
Installing P275 ADB Drivers :​
If your tab is not rooted, even after trying both Methods, then the problem must be the ADB drivers. Here is a guide for installing them.
1) First, download the P275-Drivers.rar from HERE [Dev-Host] and Extract it anywhere in your PC.
2) Go to Settings > Developer Options > (and tick) USB Debugging ON
3) Connect your tablet to your PC via USB Cable.
4) Open Device Manager (Seach in Start)
5) Under Other Devices, you will see Android with a caution symbol.
Note : If you do not see the Android with a caution symbol, then ADB drivers are already installed in your PC and you don't need to continue...
6) Right-Click on Android and select Update Drivers and a dialog box will appear. Select Browse my Computer for Driver Software
7) Browse for the folder that you extracted earlier and click OK.
8) A warning will appear. Click Install the driver software anyway.The ADB drivers will be installed.
9) The caution symbol will disappear and you will see Android Composite ADB Interface.
Guide by luvk1412 : Post #104
z

Roms & Mods For Funbook Infinity P275
MoDs & AppS​
1) Remove Bloatwares
Download Link : http://www.mediafire.com/?oapdvt5n7hw47e4
About :
Type : Flashable Zip
Instructions : Flash In CWM
This will remove all the unwanted or bloatware apps from your Funbook Infinity.
List Of Apps : (will be removed)
-Apps.apk
-E-learning.apk
-Entertainment.apk
-Games.apk
-Livetv.apk
-Movies.apk
-mStore_P275_230812.apk
-Need For Speed The Run.apk
-Weather Widget Tab.apk
-Exchange.apk
-PlusOne.apk
-Tetris.apk
-LiveWallpapers.apk
2) Swap Internal & External SD Card
Thanks to luvk1412
Download Link : http://www.mediafire.com/?2gazncf5z2zx85y
Original Thread : http://forum.xda-developers.com/showthread.php?t=2066307
About :
Type : Flashable Zip
Instructions : Flash In CWM
This mod will swap your internal & external sdcards making your External SD card Internal and Internal SD card External. You can even have a mighty 32 GB internal memory with this mod...
3) Undo Swap Internal & External SD Card
Download Link : http://www.mediafire.com/?qt8ossi4iiyk2l3
About :
Type : Flashable Zip
Instructions : Flash In CWM
This mod will undo what you did in the above mod. This will reset if you swapped your SD cards.
LiveSuit Guide​
Guide by EMOBlazeXD : http://forum.xda-developers.com/showthread.php?t=2326368
z

Thread Changelog :
Added advanced specs
Added two root methods
Added CWM recovery
Added Mods
Updated CWM recovery
Added guide for instaling drivers
Things to expect :
Livesuit guide
More CooL Mods
Mod to deodex custom rom
Detailed guide with pictures for installing drivers
CM10 rom (under development)

will the above mod work on p275?
Ganesh A said:
last one
Click to expand...
Click to collapse
will the above mod work on p275?

arunanson said:
will the above mod work on p275?
Click to expand...
Click to collapse
Yes, I tested and only posted here...

Ganesh A said:
Yes, I tested and only posted here...
Click to expand...
Click to collapse
Found Original ROM!
LiveSuit flashable
Some good-guy-greg was generous enough to post a link to Micromax FTP servers, intended for Service Technicians.
And voila! There was livesuit Image for every single micromax tabs.
I am currently downloading it (78%@ 150k).
FTP
Username/Pswd:https://docs.google.com/file
:good:
You guys download it too, as a security.... Who knows when micromax bar this user..
:angel:

Thnks I will add it to my thread...
Sent from my GT-S5360 using Tapatalk 2

Prashnts said:
Found Original ROM!
LiveSuit flashable
Some good-guy-greg was generous enough to post a link to Micromax FTP servers, intended for Service Technicians.
And voila! There was livesuit Image for every single micromax tabs.
I am currently downloading it (78%@ 150k).
FTP
Username/Pswd:https://docs.google.com/file
:good:
You guys download it too, as a security.... Who knows when micromax bar this user..
:angel:
Click to expand...
Click to collapse
somehow i am not able to enter the server...its saying "530 User cannot log in."
Edit : Missed the "m" XD ..now able to log in! =)

Ok, guys...
Thread will be updated with some advanced specs and livesuit flashing guide...
FEEL FREE TO COMMENT!!!

Eagerly waiting for your custom rom
Ganesh A said:
Ok, guys...
Thread will be updated with some advanced specs and livesuit flashing guide...
FEEL FREE TO COMMENT!!!
Click to expand...
Click to collapse
Gr8 Efforts..
Keep up the good work...
Regards,
Amardeep Banga

pratap6789 said:
somehow i am not able to enter the server...its saying "530 User cannot log in."
Edit : Missed the "m" XD ..now able to log in! =)
Click to expand...
Click to collapse
I'd recommend to download early version, as the latest image is 600 MB+ and has some crap preinstalled..:good:

Prashnts said:
I'd recommend to download early version, as the latest image is 600 MB+ and has some crap preinstalled..:good:
Click to expand...
Click to collapse
Yeah, the V2 contains the Virint folder which will be copied to our sdcard...
But, the V2 is compatible with both the variants of Infinity..

Added Advanced Specs
Advanced Specifications Added Guys...
Check it Out...

Question
Ganesh A said:
Advanced Specifications Added Guys...
Check it Out...
Click to expand...
Click to collapse
I want know how to go back to the default Recovery, If I have to?
I am new to this, so please don't mind if its a stupid question.
Waiting for your reply.
Thanks,

amarbanga123 said:
I want know how to go back to the default Recovery, If I have to?
I am new to this, so please don't mind if its a stupid question.
Waiting for your reply.
Thanks,
Click to expand...
Click to collapse
In Stock Recovery, You can't do anything cause you cannot scroll...You can only reboot in stock recovery...
A person who never made a mistake never tried anything new.
- Albert Einstein

Thanks for a quick response
Ganesh A said:
In Stock Recovery, You can't do anything cause you cannot scroll...You can only reboot in stock recovery...
A person who never made a mistake never tried anything new.
- Albert Einstein
Click to expand...
Click to collapse
Thank you for a quick response.
But I want to know how to go back to stock recovery after installing CMW?
The only reason I think I will go back to stock is in situation where in I have to take the tab to the service centre.
Thanks,

amarbanga123 said:
Thank you for a quick response.
But I want to know how to go back to stock recovery after installing CMW?
The only reason I think I will go back to stock is in situation where in I have to take the tab to the service centre.
Thanks,
Click to expand...
Click to collapse
maybe ...just maybe ...flashing the image through livesuit might install the stock recovery...
(i am also new to this... do dont mind me )

amarbanga123 said:
Thank you for a quick response.
But I want to know how to go back to stock recovery after installing CMW?
The only reason I think I will go back to stock is in situation where in I have to take the tab to the service centre.
Thanks,
Click to expand...
Click to collapse
Just flash the live suit image to ur tab...
And it will be as u brought from the shop!
For livesuit instructions...
I will add it to this thread...
A person who never made a mistake never tried anything new.
- Albert Einstein

Star B94M / B943 MTK 6589 Quadcore

Star B943 (B94M) MTK6589 Quad Core 4.5Inch 1GB RAM 4GB ROM Dual Camera 5.0MP+12MP WCDMA 3G Dual SIM Card SmartpPhone
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Please pay attention, there are two versions of this devices on the Market!!!
One is with Dualcore and the other one is with Quadcore MTK6589.
So be carefully with Flashing and Rooting the devices.
There is already some progress with CWM and Root on German chinamobiles.org Forum.
-------------------------------------------------------- Testing LeWa Port Rom -------------------------------------------------------------------------------
Update 07.05.2013: LeWaport_Star_B94M_22.05.13_cm08
My friends here comes a new LeWaport (cmod08) based on the stable release for Amoi N828.
If your already on lewa simple make backup, install cmod08.zip, wipe dalvik and cache after install, all others look instructions below.
Known bugs: Wifi nvrambug, with my fix bluetooh is only working after factory reset or resore data.
Update 07.05.2013: LeWaport_Star_B94M_08.05.13_cm04
Dear friends of LeWa here is a Test version based on LeWa Amoi N828
This version is rooted with gapps, no need to load these.
Hints for install:
1. Boot to CWM or TWRP Recovery
2. Make backup including boot and recovery ( TWRP 2.5.0.0 will be installed )
3. Wipe System partition
4. Install LeWaport_Star_B94M_07.05.13_cm03.zip
6. Reboot and be happy
Known errors: some chinese apps and strings, noLED patch still needed
Further steps: bugfixing, try to port multilanguage support (don´t hesitate to help )
New logo needed
-------------------------------------------------------- Hints for 4.2.1 -------------------------------------------------------------------------------
Update 03.05.2013: Batterylive improvement
User slein has submitted selfcoded apk for LED Fix ! Thanks to him!!!!
There are a lot of activities to fix sporadical battery drain. Following APK seems to be workaround install the app and disable LED notification with widget. Thx to all testers!
Good Batterytool
Update 26.04.2013: Japanese 4.2.1 JB-image from needrom
Well running 4.2.1 from needrom
for most users, please read carefully instructions, do backup (Titanium and/or CWM/TWRP) before update
and make Factory reset as described, to avoid most problems!
Howto Root 4.2.1 and GPS-Fix by JBrandtner
---------------------------- Hints for 4.1.2. --------------------------------------------------------
Update 18.04.2013: Wifi Mac change Fix ( Thx to okupka )
- use these file (make backup before!!!) with this guide and you are done
Update 12.04.2013: Different Sound improvements
People who have problems with sound try this link from Zopo-Forum
or from Patchworkoftips
Update 11.04.2013: Data Resize partition to 2.74GB Detailed description from here
1. We backup with recovery.
2. Unloaded and 2.74GB decompressed data (Thx to spanish friends! ).
3. SP Open Flashtool and as we have done before installing the recovery in scatter-loading MT6589_Android_scatter_emmc.txt select the file in the folder where we unzipped 2.74GB Data
4. We ensure that only EBR1 and EBR2 are marked.
5. We Give to Download, accept the prompt, connect via USB the phone off the PC. As with the recovery if the process fails, disconnect the cable, remove and put the battery and repeat this step.
6. If all goes well, will back the green circle. Disconnect the phone from the PC.
7. Now we go back to recovery (Turn on the phone by holding the power key + volume +).
8. In the recovery do wipe data / factory reset.
9. Optionally if you want to restore the data and installed applications we advance restore, choose the backup you made ​​in step 1, and finally we give to Restore data.
10. Reboot from recovery. In this first boot after repartitioning we may see a notification saying the phone storage is damaged, then click in it. It will show a dialog box asking if you want to format the SD card, does not refer to the External SD but the phone's internal memory, so we do not fear clicking on Format. After doing the latter, voila, you have the Data partition (where apps are installed) extended to 2.74GB
Update 08.04.2013: 3G improvement
if phone is already root
Install from market the mobileuncle tools.
-> enter engineer mode (MTK).
-in modemtestactivity change "factory" for "telephone".
-in "band mode" GSM mode uncheck the "PCS1900."
New TWRP 2.4.4.0 Recovery available here
Update 03.04.2013: Networklocation Fix
by radekfor: i think i solved cell location problem.
Simply install latest Gapps for JB 4.1.2
Click to expand...
Click to collapse
http://goo.im/gapps/gapps-jb-20121011-signed.zip
-> boot to Recovery ( Mobileuncle Tools, or Quickboot,.... ) -> Install zip from SD-Card , ....
Update 28.03.2013: Working on JB 4.1.2
Here you go at your own risk
Drivers;
CWM 5504 and Root here;
German instruction here
New SP_Flash_Tool_v3.1304.0.119
After extracting the zip file:
1. Debug Mode in the Developer Tools Switch
2. Install the drivers ( others may work better, e.g. pdanet )
3. The superuser-313-arm-signed.zip from third copy to the external SD card
4. Phone off and take out battery
5. using the SPFTools load in directory 2. Scatterdatei -> load and Recovery.img, boot.img and flash (press download and then return battery back)
6. Disconnect the data cable after green OK
7. When switching power and Vol + hold when the Green Man comes release Power and Vol + hold on.
8. In CWM now make complete backup, after this install zip from SDcard install the superuser zip ... JB 4.2.1 may need other tools look here found by #90
9. skip step 7 +8 and install superuser using the MTKdroidtools and make backup (but it takes a relatively long time)
10. You can now delete with MTK Droidtool some China-apps."
PS: Backup Rom made with SPFtools->readback

Thanks for the alert.
I've got a quad core 6589 version, so far cannot find a way to root it..
And it's NetworkLocation.apk is missing, i tried a couple of NetworkLocation.apk from JellyBean gapps zip files, no one seems to work, either not installable, crash on boot or not working.
3G connection seems to be dodgy, H/H+ is shown on the top bar but data is not coming down normally, during 1 minute, only less than 100k data come down and not able to load even 1 page...
Anyone has the same problem?
Cheers,
Fish

star b943 (mtk6589 b94m)
could someone translate recovery menu from Chinese Language

Yes the baseband or antennas seems to be crap.
Start download and remove your hands from the device or take it only with two fingers on the upper side, then my downlads finish and downloads show normal values. Speedtest with upload is seems to be fine,...
If someone needs root or cwm write me pm, or give me public upload location I´m not so experienced with this,...
Best regards

Thanks for the advice

radekfor said:
could someone translate recovery menu from Chinese Language
Click to expand...
Click to collapse
Translate into:
-Factory Reset
-Auto (Overall?) Test
-Manual (Overall?) Test
-Single Function Test
-Test report
-Clear eMMC
-Version Info
-Reboot
Hope this helping.:laugh:

how do you think about the Star N9589?
with same quad core cpu mt6589

haisir said:
how do you think about the Star N9589?
with same quad core cpu mt6589
Click to expand...
Click to collapse
The MT6589 is really good stuff, for me its my personal Favorite , but I would prefer smaller devices with 4-4,7" max screensize.
5,5" and higher does not really fit in any shirt pocket. If I ever have to carry a bag for my phone I would prefer a tablet with much better screens and battery life.
So i´m looking forward to Jiayu G4, G5, UMI X1S, or something similar screensize

cmoegele said:
Update 28.03.2013:
Here you go at your own risk CWM 5504 and Root
Best regards
Click to expand...
Click to collapse
That's great!!!!
Thanks, it worked!
Now I still have two problems:
- amazon app-shop doesn't start (it remains black with amazon logo)
- doesn't vibrate on call in vibration mode
does someone else have the same problems?
Thanks

B94M/B943 quad
Thank you everyone for your hard work and time. I have very little experience (twice with well established models)
I was wondering if someone could clean up the txt instruction translation so someone like me can avoid brick making. Even adding better detail would be sweet. I will copy below. Thanks in advance.
"ATTENTION: The Star B94M is available as dual and quad core version!
The tools here refer exclusively to Star B94M MTK6589 or B943 quadcore devices!
After extracting the zip file:
1. Debug Mode in the Developer Tools Switch
2. Install the drivers
3. The superuser-313-arm-signed.zip from third copy to the external SD card
4. Phone off and take out battery
5. using the SPFTools load in directory 2. Scatterdatei -> load and Recovery.img, boot.img and flash (press download and then return battery back)
6. Disconnect the data cable after green OK
7. When switching power and Vol + hold when the Green Man comes release Power and Vol + hold on.
8. In CWM now either only make complete backup, or install zip from SDcard install the superuser zip ...
9. skip step 7 +8 and install superuser using the MTKdroidtools and make backup (but it takes a relatively long time)
10. You can now delete with MTK Droidtool some China-apps."

bradstallion said:
That's great!!!!
Thanks, it worked!
Now I still have two problems:
- amazon app-shop doesn't start (it remains black with amazon logo)
- doesn't vibrate on call in vibration mode
does someone else have the same problems?
Thanks
Click to expand...
Click to collapse
vibration problem was a wrong setting by my side... still have problems with amazon app-shop (very strange, I've it installed on many devices and different versions of android, jelly bean included)

angryfish99 said:
Thanks for the alert.
I've got a quad core 6589 version, so far cannot find a way to root it..
And it's NetworkLocation.apk is missing, i tried a couple of NetworkLocation.apk from JellyBean gapps zip files, no one seems to work, either not installable, crash on boot or not working.
3G connection seems to be dodgy, H/H+ is shown on the top bar but data is not coming down normally, during 1 minute, only less than 100k data come down and not able to load even 1 page...
Anyone has the same problem?
Cheers,
Fish
Click to expand...
Click to collapse
The MTK chipsets have always been weak on data connection starting from the MTK6573. It's so bad that connection can be lost while my Samsung right beside it has a good connection.
Anybody knows what is wrong with this China made phones?

Star
I managed to root. Thanks for the help guys (sarcasm).......The files that "cmoegele" posted worked except for the usb driver files. I had to use PdAnet for connection. I'll be watching to see what other members find on the camera focus and poor data comms.
Thank You

Data upload is stable, and downlad has good values for a while, but slows down from time to time. So I think the device is not doing completly wrong. There needs to be still some finetuning in Baseband and Rom like man other devices always need.
The performance and quality is really good, even +2 days Batter lifetime is a good value for this powerful device.
I´m waiting for new Roms

fmehrtens said:
I managed to root. Thanks for the help guys (sarcasm).......The files that "cmoegele" posted worked except for the usb driver files. I had to use PdAnet for connection. I'll be watching to see what other members find on the camera focus and poor data comms.
Thank You
Click to expand...
Click to collapse
Hi fmehrtens, may I know the RAM and ROM capacity of your phone model? I am wondering if 8GB ROM and 1GB RAM model can be rooted using same method, thanks.

Spec says 8GB ROM and 1GB RAM, however AnTuTu shows only 1GB ROM and 1GB RAM. Am I missing anything here?

Hello,
I've ordered this new phone Star One B943 Quad core, and i want to thank u for the rooting method ^^
I'm searching for the ROM stock, does anyone have the idea where i can find it ?
And i found that the Miz Z1 is the same phone, but with Android 4.2.1 installed. Do u think it's possible to upgrade the Star OS version with the Miz Z1 firmware ?

B934
windwaver said:
Hi fmehrtens, may I know the RAM and ROM capacity of your phone model? I am wondering if 8GB ROM and 1GB RAM model can be rooted using same method, thanks.
Click to expand...
Click to collapse
It is a 4G ROM and 1G RAM. Just FYI, the first time I tried to root it did not root, I had to try it a couple of times, and then I also loaded the ZIP file on the ROM memory along with the SD card. It worked that time. Not sure if that's what helped or not. The phone is a really nice phone ecpecially after rooting. I am also having trouble with Amazon App store app, Netflix playing too slow and the camera focus.
Good Luck and Thanks!

Neodragon12 said:
Hello,
I've ordered this new phone Star One B943 Quad core, and i want to thank u for the rooting method ^^
I'm searching for the ROM stock, does anyone have the idea where i can find it ?
And i found that the Miz Z1 is the same phone, but with Android 4.2.1 installed. Do u think it's possible to upgrade the Star OS version with the Miz Z1 firmware ?
Click to expand...
Click to collapse
I have got a Copy of the origin Rom done with SPFTools. If it is needed. You also can use the Scatterfile from the zip-file.
Do you have a link for the 4.2.1 Miz Z1 firmware ? Perhaps its a fake,...
Otherwise I will flash it to our device except the Preloader, so if it fails I could go back to stock.

cmoegele said:
Data upload is stable, and downlad has good values for a while, but slows down from time to time. So I think the device is not doing completly wrong. There needs to be still some finetuning in Baseband and Rom like man other devices always need.
The performance and quality is really good, even +2 days Batter lifetime is a good value for this powerful device.
I´m waiting for new Roms
Click to expand...
Click to collapse
May I know the country you using the phone in? I have very bad experience with MTK chipsets with regards to data transfer. Other phones e.g. Samsung, LG do not give me this problem.
How to improve the data performance?

Root Android 4.0.x to 4.2.x in Minutes (Updated 11th September 2013)

Android 4.0.x to 4.2.x Unlock (Root)
Developed By :- Danish
Caution: Its Harmful, it may void Your Warranty and No One is Responsible for Any Damage to Your Device. ​
To Root Android 2.2.x or Above WITHOUT A COMPUTER Click Here
What is Rooting?
Rooting enables all the user-installed applications to run privileged commands that are typically unavailable to the devices in their stock configuration. Rooting is required for more advanced and potentially dangerous operations including modifying or deleting system files, removing carrier- or manufacturer-installed applications, and low-level access to the hardware itself (rebooting, controlling status lights, or recalibrating touch inputs.) A typical rooting installation also installs the Superuser application, which supervises applications that are granted root or superuser rights. A secondary operation, unlocking the device's bootloader verification, is required to remove or replace the installed operating system. In contrast to iOS jailbreaking, rooting is not needed to run applications distributed outside of the Google Play Store, sometimes referred to as "sideloading". The Android OS supports this feature natively in two ways: through the "Unknown sources" option in the Settings menu and through the Android Debug Bridge. However some carriers, like AT&T, prevent the installation of applications not on the Store in firmware, although several devices (including the Samsung Infuse 4G) are not subject to this rule, and AT&T has since lifted the restriction on several older devices. As of 2012 the Amazon Kindle Fire defaults to the Amazon Appstore instead of Google Play, though like most other Android devices, Kindle Fire allows sideloading of applications from unknown sources, and the "easy installer" application on the Amazon Appstore makes this easy. Other vendors of Android devices may lock to other sources in the future. Access to alternate apps may require rooting but rooting is not always necessary. Rooting an Android phone allows one to modify or delete the system files which in turn can allow them to perform various tweaks, and use apps which require root access.
Requirement
Android Device
Original OTG Cable
Windows (Windows Vista,Widnows 7 and Widnows 8 Recommended)
Atleast 45% Battery
Instruction
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Download The Attachment Given Below.
Turn on USB Debugging on Your Device.
Connect Your Device With Original OTG (Data) Cable.
Don't Turn On USB Storage Mode.
It Will Automatically Install Driver (If not then download and install PDANET on your computer while your device is connected in debugging mode).
Unzip "Root.zip" Anywhere You Want (Try the Latest Version i.e. Updated on 11th September 2013).
After Installation Run "Root.exe"
Press Enter to Continue
Your Device Turn Off and Automatically Turn On (Please Don't Press Any Key While This Is Going On)
Finally it will show "Root Complete. Press Any Key to Reboot.. Please say Thanks on XDA - Developers".
To Check Weather Your Device is Rooted or Not Follow The Steps GIven Below.
Install "Root Checker.apk" On Your Device (Included).
Run "Root Checker".
If it Ask For SuperUser Permission Then Your Device is Rooted. If Not Then Repeat The Proccess Again.
Your Device is Rooted Now.. ENJOY..!! :victory::victory:
Contact Us
We Are Always There To Help You..!!
Contact Us On Facebook At https://www.facebook.com/DaNish.AnSari.1994
Please Give "Thanks".. :good:
PLEASE QUOTE FOR FURTHER INFO.

do you know
I just bought an android GFive Spark A1 do you know of a way to root it? I have rooted galaxy j before but there seems to be no root method for this phone I have now.

acuthcrenth said:
I just bought an android GFive Spark A1 do you know of a way to root it? I have rooted galaxy j before but there seems to be no root method for this phone I have now.
Click to expand...
Click to collapse
there should be a method for rooting that too...
please let me know the processor model for that..

Will this work for 4.4.x devices? Im using a 4.4.4 moto X

Sorry I won't work on android 4.4.x

danish1994 said:
Android 4.0.x to 4.2.x Unlock (Root)
Developed By :- Danish
Caution: Its Harmful, it may void Your Warranty and No One is Responsible for Any Damage to Your Device.
​
To Root Android 2.2.x or Above WITHOUT A COMPUTER Click Here
What is Rooting?
Rooting enables all the user-installed applications to run privileged commands that are typically unavailable to the devices in their stock configuration. Rooting is required for more advanced and potentially dangerous operations including modifying or deleting system files, removing carrier- or manufacturer-installed applications, and low-level access to the hardware itself (rebooting, controlling status lights, or recalibrating touch inputs.) A typical rooting installation also installs the Superuser application, which supervises applications that are granted root or superuser rights. A secondary operation, unlocking the device's bootloader verification, is required to remove or replace the installed operating system. In contrast to iOS jailbreaking, rooting is not needed to run applications distributed outside of the Google Play Store, sometimes referred to as "sideloading". The Android OS supports this feature natively in two ways: through the "Unknown sources" option in the Settings menu and through the Android Debug Bridge. However some carriers, like AT&T, prevent the installation of applications not on the Store in firmware, although several devices (including the Samsung Infuse 4G) are not subject to this rule, and AT&T has since lifted the restriction on several older devices. As of 2012 the Amazon Kindle Fire defaults to the Amazon Appstore instead of Google Play, though like most other Android devices, Kindle Fire allows sideloading of applications from unknown sources, and the "easy installer" application on the Amazon Appstore makes this easy. Other vendors of Android devices may lock to other sources in the future. Access to alternate apps may require rooting but rooting is not always necessary. Rooting an Android phone allows one to modify or delete the system files which in turn can allow them to perform various tweaks, and use apps which require root access.
Requirement
Android Device
Original OTG Cable
Windows (Windows Vista,Widnows 7 and Widnows 8 Recommended)
Atleast 45% Battery
Instruction
​
Download The Attachment Given Below.
Turn on USB Debugging on Your Device.
Connect Your Device With Original OTG (Data) Cable.
Don't Turn On USB Storage Mode.
It Will Automatically Install Driver (If not then download and install PDANET on your computer while your device is connected in debugging mode).
Unzip "Root.zip" Anywhere You Want (Try the Latest Version i.e. Updated on 11th September 2013).
After Installation Run "Root.exe"
Press Enter to Continue
Your Device Turn Off and Automatically Turn On (Please Don't Press Any Key While This Is Going On)
Finally it will show "Root Complete. Press Any Key to Reboot.. Please say Thanks on XDA - Developers".
To Check Weather Your Device is Rooted or Not Follow The Steps GIven Below.
Install "Root Checker.apk" On Your Device (Included).
Run "Root Checker".
If it Ask For SuperUser Permission Then Your Device is Rooted. If Not Then Repeat The Proccess Again.
Your Device is Rooted Now.. ENJOY..!! :victory::victory:
Contact Us
We Are Always There To Help You..!!
Contact Us On Facebook At https://www.facebook.com/DaNish.AnSari.1994
Please Give "Thanks".. :good:
PLEASE QUOTE FOR FURTHER INFO.
Click to expand...
Click to collapse
danish1994 said:
Android 4.0.x to 4.2.x Unlock (Root)
Developed By :- Danish
Caution: Its Harmful, it may void Your Warranty and No One is Responsible for Any Damage to Your Device.
​
To Root Android 2.2.x or Above WITHOUT A COMPUTER Click Here
What is Rooting?
Rooting enables all the user-installed applications to run privileged commands that are typically unavailable to the devices in their stock configuration. Rooting is required for more advanced and potentially dangerous operations including modifying or deleting system files, removing carrier- or manufacturer-installed applications, and low-level access to the hardware itself (rebooting, controlling status lights, or recalibrating touch inputs.) A typical rooting installation also installs the Superuser application, which supervises applications that are granted root or superuser rights. A secondary operation, unlocking the device's bootloader verification, is required to remove or replace the installed operating system. In contrast to iOS jailbreaking, rooting is not needed to run applications distributed outside of the Google Play Store, sometimes referred to as "sideloading". The Android OS supports this feature natively in two ways: through the "Unknown sources" option in the Settings menu and through the Android Debug Bridge. However some carriers, like AT&T, prevent the installation of applications not on the Store in firmware, although several devices (including the Samsung Infuse 4G) are not subject to this rule, and AT&T has since lifted the restriction on several older devices. As of 2012 the Amazon Kindle Fire defaults to the Amazon Appstore instead of Google Play, though like most other Android devices, Kindle Fire allows sideloading of applications from unknown sources, and the "easy installer" application on the Amazon Appstore makes this easy. Other vendors of Android devices may lock to other sources in the future. Access to alternate apps may require rooting but rooting is not always necessary. Rooting an Android phone allows one to modify or delete the system files which in turn can allow them to perform various tweaks, and use apps which require root access.
Requirement
Android Device
Original OTG Cable
Windows (Windows Vista,Widnows 7 and Widnows 8 Recommended)
Atleast 45% Battery
Instruction
​
Download The Attachment Given Below.
Turn on USB Debugging on Your Device.
Connect Your Device With Original OTG (Data) Cable.
Don't Turn On USB Storage Mode.
It Will Automatically Install Driver (If not then download and install PDANET on your computer while your device is connected in debugging mode).
Unzip "Root.zip" Anywhere You Want (Try the Latest Version i.e. Updated on 11th September 2013).
After Installation Run "Root.exe"
Press Enter to Continue
Your Device Turn Off and Automatically Turn On (Please Don't Press Any Key While This Is Going On)
Finally it will show "Root Complete. Press Any Key to Reboot.. Please say Thanks on XDA - Developers".
To Check Weather Your Device is Rooted or Not Follow The Steps GIven Below.
Install "Root Checker.apk" On Your Device (Included).
Run "Root Checker".
If it Ask For SuperUser Permission Then Your Device is Rooted. If Not Then Repeat The Proccess Again.
Your Device is Rooted Now.. ENJOY..!! :victory::victory:
Contact Us
We Are Always There To Help You..!!
Contact Us On Facebook At https://www.facebook.com/DaNish.AnSari.1994
Please Give "Thanks".. :good:
PLEASE QUOTE FOR FURTHER INFO.
Click to expand...
Click to collapse

[ Lava Iris X1 Rooting Guide & General Discussion ]

[ Lava Iris X1 Rooting Guide & General Discussion ]​
Key Features:
Lava Iris X1 is a Smart Phone Powered by 5.00-inch HD 720x1280 pixels with 245 Pixels per inch (PPI) display,Android 4.4 KitKat,8 MP Auto Focus with with BSI Sensor for low light imaging and Broadcom 1.2GHz Quad Core processor coupled with Videocore IV GPU alongside 1GB RAM.
​
Rooting & Unlocking:
Code:
[B][SIZE="4"][COLOR="DarkRed"]Before You Begin[/COLOR][/SIZE][/B]
1. This will void the warranty of your device. We won’t be held responsible if you end-up bricking or damaging your device. Do it at your own risk.
2. This should only work on Windows based PCs Preferably Windows-7
3. There should be at least 65% charge in your
4. Make a Backup of Your Contacts,SMS,And Whats App data in SD Card
Code:
[B][SIZE="5"][COLOR="DarkRed"]Downloading Required Files:[/COLOR][/SIZE][/B]
Download Lava Iris X1 Root Toolkit [B][URL="https://drive.google.com/file/d/0B7OdRw3ALPgGdWcxOUx0c0llMGs/edit?usp=sharing"]Click Here To Download[/URL][/B]
Code:
[B][SIZE="5"][COLOR="DarkRed"]Preparing Your Windows PC And Magnum X1 for Rooting:[/COLOR][/SIZE][/B]
Extract Downloaded Root Tool Kit to your Windows PC Desktop
Go to Settings >> Backup & Reset >> Factory data Reset in your Lava Iris X1 and Do a factory data Reset and Complete setups after it re-boots
Enable USB Debugging On your Device You can find this option in Settings >>Developer Option >>USB Debugging.
Enable Allow Installation of Apps from Unknown Sources under Settings >> Security >> Unknown Sources also Disable verify apps bellow Unknown Sources
Now Connect your device via USB cable to windows PC and Start installing programs which is provided in tool kit in same order
1.) Adb Driver Installer 2) BRCM_Driver_Package 3.)For Windows x64 Bit/For Windows x32 Bit 4.)VRoot_1.7.8.7753_Setup
Code:
[SIZE="5"][COLOR="DarkRed"][B]Rooting :[/COLOR][/SIZE][/B]
Open installed V-Root Program and Grant USB Debugging Authorization when a pop-up pops in your device Remember to tick always allow option.
When connection is established between V-Root program and your device it will display your device model and Root Button in Opened V-Root Program
If You See Green Colored Root button in V-Root Program Just click it and Wait silently with out touching your device .After some Times Your
Device will reboot (Remember Don't Disconnect USB cable until and Unless V-Root Program show success in your PC )
When you see Success message in PC remove USB Cable and Reboot Your Phone
Now Your Lava Iris X1 is Rooted
If you guys have any doubt regarding This particular device please drop a comment here in this thread I will try to clear it to my best of knowledge...
Please Don't say thanks in words Simply press Thanks Button Which is more Meaning full?
The-Immortal.
Sent from my x604 using Tapatalk

Will it work after the 45mb update we received ota..? I tried vroot before it didn't work..
It's works for those who haven't updated the 45 mb update..
Sent from my iris X1 using XDA Free mobile app

iftekhar97 said:
Will it work after the 45mb update we received ota..? I tried vroot before it didn't work..
It's works for those who haven't updated the 45 mb update..
Sent from my iris X1 using XDA Free mobile app
Click to expand...
Click to collapse
Before proceeding to root make a factory data rest ....
Thus will not uninstall your 45 mb update ...
Root has to work if you make a factory reset ....
Press Thanks Button If You like My Work & Posts?

I did factory reset.. Then tried the rooting method.. Failed again..
Sent from my iris X1 using XDA Free mobile app

iftekhar97 said:
I did factory reset.. Then tried the rooting method.. Failed again..
Sent from my iris X1 using XDA Free mobile app
Click to expand...
Click to collapse
OK I will give you the link of full firmware which doesn't contain ota update [emoji6]

Ohk do tell me the Complete procedure.. And after rooting does the sd card move problem gets solved??
Sent from my iris X1 using XDA Free mobile app

iftekhar97 said:
Will it work after the 45mb update we received ota..? I tried vroot before it didn't work..
It's works for those who haven't updated the 45 mb update..
Sent from my iris X1 using XDA Free mobile app
Click to expand...
Click to collapse
I've rooted iris x1 after the 45MB update by flashing the stockrom. its a long process but I will post a tutorial soon.

CWM ported for our device by me & my team!!
http://forum.xda-developers.com/and...eadyported-t2934030/post56612836#post56612836

Working root method after 45mb update. no need to flash stock rom back
http://forum.xda-developers.com/android/development/guide-tool-root-lava-iris-x1-t2937024

Lava Iris X1 Atom
Guys, I followed the steps mentioned above, but no luck so far even after factory restore and Vroot update. I dont actually understand the OTA update you guys talked about. Can someone please guide me on how do i make the OTA update on my device.
I have Iris X1 Atom with a build number Lava_Iris_X1_atom_INT_S104_20150525.
I have also tried all kind of rooting Apps on Play Store, KingoRoot, SRS and so many other stuff. I'm so confused,,,,,,,,,,,,,,,,,,
Excuse my fair knowledge about android, I'm not a developer I'm just a network administrator so Please help me guys. Thanks

plzz tell me how to install Xposed.zip

XZNZ said:
plzz tell me how to install Xposed.zip
Click to expand...
Click to collapse
Download xposed apk(stable version) & install it. RAR files cannot be installed, you can extract & install.

mikhosamy said:
Guys, I followed the steps mentioned above, but no luck so far even after factory restore and Vroot update. I dont actually understand the OTA update you guys talked about. Can someone please guide me on how do i make the OTA update on my device.
I have Iris X1 Atom with a build number Lava_Iris_X1_atom_INT_S104_20150525.
I have also tried all kind of rooting Apps on Play Store, KingoRoot, SRS and so many other stuff. I'm so confused,,,,,,,,,,,,,,,,,,
Excuse my fair knowledge about android, I'm not a developer I'm just a network administrator so Please help me guys. Thanks
Click to expand...
Click to collapse
This tutorial is for Broadcom CPU, It may work for you
http://forum.xda-developers.com/android/software-hacking/root-lava-iris-x1-t3320230
---------- Post added at 06:56 PM ---------- Previous post was at 06:51 PM ----------
iftekhar97 said:
Ohk do tell me the Complete procedure.. And after rooting does the sd card move problem gets solved??
Sent from my iris X1 using XDA Free mobile app
Click to expand...
Click to collapse
for official lava ROM/firmware flashing visit http://forum.xda-developers.com/hardware-hacking/hardware/lava-iris-x1-flash-stock-rom-t2943187 .
For rooting lava iris x1 broadcom cpu visit http://forum.xda-developers.com/android/software-hacking/root-lava-iris-x1-t3320230
Thor™ : Tнё Боd оf Tнциdёґ