Database Info

[GUIDE] :: SuperPad/FlyTouch2/WWE10 Android 2.2 V2.5 #4325 Froyo USB Flashing ::

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This guide is for:
SuperPad / Flytouch2 / WWE10 Tablets
Make sure you've got the right device.
- Infotmic 10.2" Flytouch2 SuperPAD
- It has 256MB RAM
- It has 2GB Internal Storage
- Android OS 2.1
- Have 2 MicroSD Card Slots
- 1024x600 Screen Resolution
- Infotmic X210 Processor
This ROM is NOT for you if your device is SuperPad 2 / Flytouch 3
- Infotmic 10.2" Flytouch2 SuperPAD
- It has 512MB RAM
- It has 4GB Internal Storage
- Android OS 2.2
- Have 1 MicroSD Card Slots
- 1024x600 Screen Resolution
- Infotmic X220 Processor
-------------------------------------------
Warning: Follow these steps. All of them. If you do, it will work. If you misread or miss a step or skip a step because you are hurrying through the process, it WILL brick your tablet. Flashing is a relatively simple process but it requires patience. If you don't have the time to read all of the directions and follow them, YOU DO NOT HAVE TIME TO FLASH, and stick with your old firmware.
I AM NOT RESPONSIBLE FOR ANY DAMAGE THAT THIS ROM HAS CAUSED. FLASH AT YOUR OWN RISK! SINCE THERE ARE SO MANY CLONES OF THIS TABLET, DON'T EXPECT IT WILL WORK PERFECTLY.
-------------------------------------------
Note: I'm not so good in English and grammar, so bear with me. The images is not so clear co'z im using webcam for fast capture and focusing.
If I made mistakes, corrections are welcome.
:: Super Improvement ::
- Much Faster response, you will notice playing Angry Birds is smoother.
- New Default Application updates
- New Icons
- New 3D Gallery
- Supports Flash on browser.
- GPS is now working, GPS app required to test the satellite lock.
- Youtube on browser working fine if you have fast connection.
:: Known Issues ::
- "Some" RJ45 (Ethernet) Port sometimes not working
- "Some" WiFi unstable
- "Some" 3G Device not working
- Market is still free, no paid apps.
- Save path not on MicroSD but inside your Tablet (fixed)
- When it sleeps, it sleep to power off.
- Youtube App is not working, you need to download another compatible version.
:: Thanks to the Donors ::
- Austin Pc Fixed .Com
- frank rugolo
- pastorb1
:: Credits ::
- stragulus
- dgcruzing
- isergio
- _barsuk_
- Aries on an Android (android tablet forum)
- rgocal (android tablet forum)
- and others who I forgot to mention
This guide is for Windows XP, I'm windows7 user before but I downgrade because I want to use my other old softwares for flashing. If you get the idea you can do this also on windows7.
------------------------------
NOTE:
- For windows7 user Run As Administrator the IUW application.
- 64bit Operating System may not work with IUW application.
------------------------------
NOTE: If your tablet showing version 6.1.5 (559[or higher]) or 0.6.1.2(587) Then you can skip some part of the guide. Scroll down directly to the "Alternative Solution" using MicroSD burning. You still need to download the Android 2.2 Froyo Main Firmware.
------------------------------
:: Preparing the Male to Male USB Cable :: (if you have one skip this)
Ok let's start, what you need is a male to male USB cable, if you don't have one you can make your own male to male cable.
Tools
- 2 USB Cable
- Scissor or Cutter
- Electrical Tape or anything to cover the exposed wire
- Solder Lead (Optional)
- Soldering Iron (Optional)
1. Cut each USB to the nearest tip of the female, to make your USB cable longer.
2. Cut each end of the USB to expose the wires and copper wires.
3. Now you can connect each end of the USB, and twist each wires, you can solder it if you like.
4. Now you can tape each wires, and tape all the wires.
This is the finish product.
:: Preparation for Files and Flashing Procedures ::
*Note: Please PM me if there are missing links.
Download IUW 1.1 Flashing Tool
Download Firmware V2852
Download Uboot - V 0.6.1.2(587) working camera
Download Main Android 2.2 Froyo ROM with Flash 10.1
Download New Ramdisk image to change the path of save files to SDCard1
Download Extra Tools Apps
Updated ROM: 25.11.2011
Download Firmware Froyo 2.2 v2.5 #4325
------------------------------------------------------------
:: Clean up the tablet files ::
- Wipe cache partition
- Wipe data/factory reset
- then reboot.
Remove all microSD so that it will not start burning if you have firmware on your microSD.
Visit this link how to clean the data for your tablet.
------------------------------------------------------------
:: Let's Start ::
1. Make a Folder on your desktop for fast track of your files, I named it Froyo 2.2 and save all your downloaded files here.
2. Download IUW Flashing tool, and save it inside the folder of your desktop.
3. After download, unpack it inside the folder.
NOTE: Your tablet should be full charged, and connect the charger while flashing, just to make sure it will not drain much power on your tablet. Don't forget also to remove all your MicroSD cards from the tablet.
4. Since your done making your USB Cable, your tablet should be off and plug the other end USB to the PC and plug the other end on your tablet USB Port between the headphone jack and SDCard Slot 1.
5. Open the IUW application, select Link USB on the left side. And on the Link information the DV (driver) is greyed, because it's not detecting the tablet with driver.
6. Power up the tablet with this combination Power + Menu button for few seconds until you see the message on your tablet "Communicating with PC..."
7. A New Hardware notification will pop up on your PC Screen.
(you have 2 minutes to setup this or the tablet will boot normally)
Select Advance, Next.
Browse the driver from your desktop inside the folder "otg_driver"
Then it will install the driver.
The flasher will turn to green.
:: FLASHING V2852 ::
This rom will only run on tablets which display a version number in the bottom-right "Infotmic" screen when first turned on.. If yours doesn't display a number there, you will need to flash firmware v2852 first.
8. 'Choose a wrapped image' press the "..." button Select the IUS file "WWE10B_Android_393477-v9full.ius"
9. Click 'burn' to flash the tablet.
This picture is flashing the tablet.
10. After burning finishes, plug out the USB cable and press Reset, then restart the device.
:: Flashing UBOOT ::
11. Open UIW application, and connect your tablet USB to PC.
12. Select "Link USB" on "USB Mode:" select "Expert Mode" Uncheck all except "UO".
13. Browse the "u-boot-nand.bin" the one with working camera.
14. After flashing this is the result.
15. Your screen with start to flicker, it will start to initialize.
16. I will take time to load up, until you are in display calibration.
:: Flashing IMAGES ::
17. Power off your tablet, and prepare again the UIW to flash the main android 2.2 firmware.
18. Click Link USB, and select Expert burn.
NOTE: Use the other Ramdisk.img fix you download, not from the flash10.1-android2.2 folder.
19. Power up the tablet with this combination Power + Menu button for few seconds until you see the message on your tablet "Communicating with PC...", if the Dv is green your ready and click the burn button.
20. I will take time to load up, until you are in display calibration and your Done!
:: Alternative Solution ::
If you cant burn the main android image using USB method. You can try the MicroSD card method, but this is only applicable if your tablet will display the version under the InfoTMIC start up logo.
Lets make a bootable MicroSD, to convert the file size to 700~705MB, you need a MicroSD at least 1GB.
Download WinHex with MicroSD Clone Image.
1. Open your WinHex
2. Click Tools->Disk Tools->Clone Disk->
3. On Source Raw Image: click the file button.
locate the "aben.start sector" file, click open.
4. On Destination Medium: click the drive button.
locate the Physical Media of your card reader/MicroSD, ok.
5. Fill in the Start Sector with 0 (zero).
6. Click OK, and WinHex pop up will appear, click OK and it will start cloning the image file to your MicroSD.
7. A notepad will pop up that you are done cloning the image, close and press OK on the pop up message.
8. Close WinHex, and safely remove the card reader/MicroSD.
9. Plug the card reader/MicroSD again, and do a quick format.
10. If you successfully formated the MicroSD to 700~705MB then create an "android" folder, and copy all the main image files on the folder. And your Done! :: If you fail there are some other reason, some card reader is not working properly, try to find another card reader, if your phone has MicroSD Slot and able to communicate and serve as card reader, you can use this also.
- ramdisk (use the other ramdisk you download)
- system
- uImage
- userdata
some optional or skipped file.
- u-boot-nand (android v2.2)
- zSYS (Flytouch Official Image 3245)
This is what's inside the MicroSD on android folder.
12. After copying the files plug the MicroSD at the top most/Slot 1 between the 2 USB port.
13. And Power On your Tablet, and it will start Flashing just like here on the video. http://www.youtube.com/watch?v=47kf4-Vbba8#t=3
You can also use this MicroSD to downgrade back to 3245 firmware.
Thank you.
Don't forget to click the Thank You button
joshgabel said:
SmaRkieS whats your Paypal email address? i owe you $ worked like a charm!
Click to expand...
Click to collapse
Confirmed that the 3G USB modem Huawei E1752 is working perfectly. Just create an APN and reboot while the Huawei E1752 is in the USB port.. After startup it makes a connection and works fast!
manually created an APN in settings/connections/mobile providers and configured for your local provider. Also enabled data connection, otherwise I won't start searching. After that reboot and it started working. No specials actions required.
:: Google Sync ::
If you want to sync the calendar (basic) and contacts go to:
Contacts-> Menu-> Accounts-> Add Account-> Corporate-> enter data for a google account -> choose the default setting -> set the sync options-> Enter the name
:: z4root USB Debug solution ::
1. Download Launcher Pro.
2. Install Launcher Pro.
3. Tap the Home Button at the upper left, it will let you choose different type of launchers.
4. Select Launcher Pro.
5. Tap Menu Button = or at press the menu button at the top of your tablet.
6. Tap the + add
7. Tap Shortcuts
8. Scroll Down, and Tap the Activities.
9. Wait it will load, scroll down to Settings.
10. Scroll down and look for Development.
11. Press OK without changing the name.
12. On Desktop/Home Tap Development.
13. Check the USB Debugging.
14. Restart if necessary.
15. And your done ready to root.
:: Enabling Live Wallpapers ::
1. After rooting your device, your good to go.
2. Install Busybox Installer.
3. Open Busybox Installer, OK, SuperUser request Allow.
4. If BusyBox is not found, tap Install.
5. Press Back Button on your tablet.
6. Install Terminal Emulator.
7. Open Terminal Emulator.
8. Type this commands.
Code:
su
mount -o remount,rw,codepage=utf8,vfat,xattr,check=no /dev/stl5 /system
cat /sdcard/LiveWallpapersPicker.apk > /system/app/LiveWallpapersPicker.apk
cat /sdcard/libRS.so > /system/lib/libRS.so
cat /sdcard/librs_jni.so > /system/lib/librs_jni.so
sample pic of my terminal emulator, I made a mistake in line 5 but it's ok just retype it.
9. Reboot your tablet.
10. Install your live wallpaper apps.
11. On your home screen, tap the menu button. (near the volume next to back)
11. Tap Wallpaper
12. Tap Live wallpapers
13. Select your live wallpapers, and your done.
sample screen shot.
:: GPS Configuration and Setup ::
Download GPS Test Tool
1. Install that app in your tablet.
2. Go to Settings
3. Go to Location & Security
4. Check Use wireless networks
5. Check GPS Satellites
6. Plug your GPS Antenna.
7. Take your antenna outdoor, if the wire is still long try to place the antenna higher.
8. Connect to your WiFi.
9. Run the GPS Status application.
10. Wait for 5~20 mins for satellite discovering and locking.
11. Wait for 5 satellite lock on and you are done.
12. Run your Google Maps, and your locked to your location.
This is the picture number of satellites and number of locked satellites.
The GPS is very accurate.
:: Dismantle/Dissemble of Superpad/Flytouch2 ::
http://www.androidtablets.net/forum/gome-flytouch-ii/14255-inside-my-superpad.html
===========================================================
This is my screen now.
with new virtual keyboard.
I also try swapper2, they say it can improve the performance. This is my Terminal Emulator.
Other Useful Guides here.
http://forum.xda-developers.com/showthread.php?t=1067746
http://forum.xda-developers.com/showthread.php?t=1048776
http://forum.xda-developers.com/showthread.php?t=831178
-------------------------------------

Good work
25-12-2012 -updated links
Download IUW 1.1 Flashing Tool iuw1.1-english.rar - 291.98 KB
Download Firmware Froyo 2.2 v2.5 #4325 - 4325.zip - 212.16 MB
Download Uboot - V 0.6.1.2(587) working camera u-boot-nand.zip v0.6.1.2(587).zip - 130.13 KB
Download New Ramdisk image to change the path of save files to SDCard1 Ramdisk_SmaRkieS.zip - 166.06 KB
Barsik recovery for superpad flytouch - recovery_rd.zip - 1.32 MB

Thank you, cause this people are lazy enough to open the pdf/docx file instructions hehehehe.
I made some mistakes on my post, please post some corrections and suggestions are welcome also.

Thank u for your instructions. Its the first time I manually try to flash my pad so I had to flash to 2852 rom first and it does but when i restart and check my version build it is still on build 1561 (flashing with usb cable).
Tried couple of times can u help me out?

kolk11 said:
Thank u for your instructions. Its the first time I manually try to flash my pad so I had to flash to 2852 rom first and it does but when i restart and check my version build it is still on build 1561 (flashing with usb cable).
Tried couple of times can u help me out?
Click to expand...
Click to collapse
Can you see the version under the InfoTMIC start up logo?
If you can see it then you are ready to update using MicroSD method.

@smarkies
no there is no version number
first time I connected to pc it said found new hardware but no driver. There I selected the otg driver in the package.
Burntool does connect and goes up from 0 to 100 procent (very quick about 7 secs.) when i burn but when i check im still on my previous build.
After that I tried to update to other firmware using update.zip on winhexed sd card. This did work so now I am on 1623 build.
after that I tried again using burntool but still didnt work out.
In the folder containing the 2852 rom there are also two folders
0.6.1.2_1.4.587_OV2655 and
0.6.1.5_1.4.587_GT2005
both contain uboot and uboot nand files is there something I have to do with them before I can flash?
Any advice?
Other thing I noticed: in recovery menu there is a line saying:
e:can't open / cache / recovery / command
It didnt stop me from update with update zip but could it be the reason burntool isnt working for me?

kolk11 said:
@smarkies
no there is no version number
first time I connected to pc it said found new hardware but no driver. There I selected the otg driver in the package.
Burntool does connect and goes up from 0 to 100 procent (very quick about 7 secs.) when i burn but when i check im still on my previous build.
After that I tried to update to other firmware using update.zip on winhexed sd card. This did work so now I am on 1623 build.
after that I tried again using burntool but still didnt work out.
In the folder containing the 2852 rom there are also two folders
0.6.1.2_1.4.587_OV2655 and
0.6.1.5_1.4.587_GT2005
both contain uboot and uboot nand files is there something I have to do with them before I can flash?
Any advice?
Other thing I noticed: in recovery menu there is a line saying:
e:can't open / cache / recovery / command
It didnt stop me from update with update zip but could it be the reason burntool isnt working for me?
Click to expand...
Click to collapse
dont touch any file inside the folder of 0.6.1.2_1.4.587_OV2655 and 0.6.1.5_1.4.587_GT2005.
Try to burn the UO first, u-boot-nand.bin the one with working camera, if not try this another u-boot-nand.
Then burn the Main Image Android Rom.

Thanks for the quick repy to be sure I wont Brick my Pad
for the uo file I use Uboot - V 0.6.1.2(587) or uboot - 0.6.1.5 (587)
and for the ROM files I only use files from the 20110416-v1001 folder?
If so I will burn right away

kolk11 said:
Thanks for the quick repy to be sure I wont Brick my Pad
for the uo file I use Uboot - V 0.6.1.2(587) or uboot - 0.6.1.5 (587)
and for the ROM files I only use files from the 20110416-v1001 folder?
If so I will burn right away
Click to expand...
Click to collapse
I abused my pad flashing many times, and still it is alive, It will brick if your USB cable is poorly made, or overpowered that will fry the motherboard of your tablet, just like what happen to other people.
the safest way to flash is microSD, but it is tricky with this froyo update that's why I risk on flashing using USB.
V 0.6.1.2(587) this one has working camera. But you can try both uboot to display the version under the InfoTMIC logo. But I use V 0.6.1.2(587) coz I want the camera to work fine.
Yes the files inside the 20110416-v1001 folder except for the u-boot-nand inside.
If the USB flashing doesnt work you can try the alternative, using the microSD.

Thank u very very much worked like a chime.
camera and wifi are working I used uo V 0.6.1.2(587)
will play with it tonight to see what else it can do now
Greetz

kolk11 said:
Thank u very very much worked like a chime.
camera and wifi are working I used uo V 0.6.1.2(587)
will play with it tonight to see what else it can do now
Greetz
Click to expand...
Click to collapse
Glad you made it! Check out the speed and the Gallery is now 3D
So you did the UO burn first then Main Image?
Confirm this and I will revise my post.
Co'z I burn my tablet the other way. Main Image then UO.

Yep U0 first than main Rom
Only thing is market has only free apps
but doesnt matter can get apps all over the internet

kolk11 said:
Yep U0 first than main Rom
Only thing is market has only free apps
but doesnt matter can get apps all over the internet
Click to expand...
Click to collapse
Thank you for the confirmation.
Confirm this again.
First: WWE10B_Android_393477-v9full.ius burn
Second: UO burn
Third: Main Image burn
Check my post, applanet can help you with that hehehehe.
This is my screen now.
with new virtual keyboard.
I also try swapper2, they say it can improve the performance. This is my Terminal Emulator.

IUW does not work with 64 bit
Please add in the OP that some on other forum sites have confirmed that IUW does NOT work with any 64 bit operating system.
I will link to reference if I come across it again...
For Development USB debugging options for Z4Root, you may also want to link to my post HERE.

quick tip for windows 7 users, picture 6 will not happen, at least it didn't for me, you need to navigate to devices and printers, find the unknown device, and manually install the otg driver

Works as advertised.
I bricked my tab first, but got it up and running again with your step by step guide. Many thanks!

I followed your instruction for SD card and it worked perfectly. I now have the 3925 version on my Superpad and it seems to be working well. Definite improvement on Angry Birds(which I play way too much) and Home Run Battle 3D. WiFI works fine, don't know about GPS or camera as I don't really use them, but I will check just for curiosity sake Seems to be faster and I have had no random lockups that I had with the v5 I had on previously. I will report back as I use it. Thanks for all the great work!

Jiggity Janx said:
Please add in the OP that some on other forum sites have confirmed that IUW does NOT work with any 64 bit operating system.
I will link to reference if I come across it again...
For Development USB debugging options for Z4Root, you may also want to link to my post HERE.
Click to expand...
Click to collapse
Yes, that's why I made it with Windows XP, and we are aware that 64bit OS is so choosy in terms of software compatibility.
About the USB Debugging, I already made a guide after the Flashing/Burning guide.
caravanman said:
quick tip for windows 7 users, picture 6 will not happen, at least it didn't for me, you need to navigate to devices and printers, find the unknown device, and manually install the otg driver
Click to expand...
Click to collapse
Yes, It is self understanding, there is a note above I use windows XP, but the idea is still there.
If you like to contribute for a guide in windows 7 is welcomed.
nullandvoid said:
I bricked my tab first, but got it up and running again with your step by step guide. Many thanks!
Click to expand...
Click to collapse
You are welcome, enjoy your new faster tablet.
woodeman said:
I followed your instruction for SD card and it worked perfectly. I now have the 3925 version on my Superpad and it seems to be working well. Definite improvement on Angry Birds(which I play way too much) and Home Run Battle 3D. WiFI works fine, don't know about GPS or camera as I don't really use them, but I will check just for curiosity sake Seems to be faster and I have had no random lockups that I had with the v5 I had on previously. I will report back as I use it. Thanks for all the great work!
Click to expand...
Click to collapse
Thank you so much, but I would like to suggest to remove the long quote of my post, just to make the thread clean.

SmaRkieS said:
Thank you for the confirmation.
Confirm this again.
First: WWE10B_Android_393477-v9full.ius burn
Second: UO burn
Third: Main Image burn
Check my post, applanet can help you with that hehehehe.
FOr your confirmation I directly made the UO burn and than burned the main image burn never touched WWE10B_Android_393477-v9full.ius
Where can I find your post on applanet to get market running?
Thanks in advance
Click to expand...
Click to collapse

kolk11 said:
SmaRkieS said:
Thank you for the confirmation.
Confirm this again.
First: WWE10B_Android_393477-v9full.ius burn
Second: UO burn
Third: Main Image burn
Check my post, applanet can help you with that hehehehe.
FOr your confirmation I directly made the UO burn and than burned the main image burn never touched WWE10B_Android_393477-v9full.ius
Where can I find your post on applanet to get market running?
Thanks in advance
Click to expand...
Click to collapse
pmed you.
Click to expand...
Click to collapse

Star B94M / B943 MTK 6589 Quadcore

Star B943 (B94M) MTK6589 Quad Core 4.5Inch 1GB RAM 4GB ROM Dual Camera 5.0MP+12MP WCDMA 3G Dual SIM Card SmartpPhone
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Please pay attention, there are two versions of this devices on the Market!!!
One is with Dualcore and the other one is with Quadcore MTK6589.
So be carefully with Flashing and Rooting the devices.
There is already some progress with CWM and Root on German chinamobiles.org Forum.
-------------------------------------------------------- Testing LeWa Port Rom -------------------------------------------------------------------------------
Update 07.05.2013: LeWaport_Star_B94M_22.05.13_cm08
My friends here comes a new LeWaport (cmod08) based on the stable release for Amoi N828.
If your already on lewa simple make backup, install cmod08.zip, wipe dalvik and cache after install, all others look instructions below.
Known bugs: Wifi nvrambug, with my fix bluetooh is only working after factory reset or resore data.
Update 07.05.2013: LeWaport_Star_B94M_08.05.13_cm04
Dear friends of LeWa here is a Test version based on LeWa Amoi N828
This version is rooted with gapps, no need to load these.
Hints for install:
1. Boot to CWM or TWRP Recovery
2. Make backup including boot and recovery ( TWRP 2.5.0.0 will be installed )
3. Wipe System partition
4. Install LeWaport_Star_B94M_07.05.13_cm03.zip
6. Reboot and be happy
Known errors: some chinese apps and strings, noLED patch still needed
Further steps: bugfixing, try to port multilanguage support (don´t hesitate to help )
New logo needed
-------------------------------------------------------- Hints for 4.2.1 -------------------------------------------------------------------------------
Update 03.05.2013: Batterylive improvement
User slein has submitted selfcoded apk for LED Fix ! Thanks to him!!!!
There are a lot of activities to fix sporadical battery drain. Following APK seems to be workaround install the app and disable LED notification with widget. Thx to all testers!
Good Batterytool
Update 26.04.2013: Japanese 4.2.1 JB-image from needrom
Well running 4.2.1 from needrom
for most users, please read carefully instructions, do backup (Titanium and/or CWM/TWRP) before update
and make Factory reset as described, to avoid most problems!
Howto Root 4.2.1 and GPS-Fix by JBrandtner
---------------------------- Hints for 4.1.2. --------------------------------------------------------
Update 18.04.2013: Wifi Mac change Fix ( Thx to okupka )
- use these file (make backup before!!!) with this guide and you are done
Update 12.04.2013: Different Sound improvements
People who have problems with sound try this link from Zopo-Forum
or from Patchworkoftips
Update 11.04.2013: Data Resize partition to 2.74GB Detailed description from here
1. We backup with recovery.
2. Unloaded and 2.74GB decompressed data (Thx to spanish friends! ).
3. SP Open Flashtool and as we have done before installing the recovery in scatter-loading MT6589_Android_scatter_emmc.txt select the file in the folder where we unzipped 2.74GB Data
4. We ensure that only EBR1 and EBR2 are marked.
5. We Give to Download, accept the prompt, connect via USB the phone off the PC. As with the recovery if the process fails, disconnect the cable, remove and put the battery and repeat this step.
6. If all goes well, will back the green circle. Disconnect the phone from the PC.
7. Now we go back to recovery (Turn on the phone by holding the power key + volume +).
8. In the recovery do wipe data / factory reset.
9. Optionally if you want to restore the data and installed applications we advance restore, choose the backup you made ​​in step 1, and finally we give to Restore data.
10. Reboot from recovery. In this first boot after repartitioning we may see a notification saying the phone storage is damaged, then click in it. It will show a dialog box asking if you want to format the SD card, does not refer to the External SD but the phone's internal memory, so we do not fear clicking on Format. After doing the latter, voila, you have the Data partition (where apps are installed) extended to 2.74GB
Update 08.04.2013: 3G improvement
if phone is already root
Install from market the mobileuncle tools.
-> enter engineer mode (MTK).
-in modemtestactivity change "factory" for "telephone".
-in "band mode" GSM mode uncheck the "PCS1900."
New TWRP 2.4.4.0 Recovery available here
Update 03.04.2013: Networklocation Fix
by radekfor: i think i solved cell location problem.
Simply install latest Gapps for JB 4.1.2
Click to expand...
Click to collapse
http://goo.im/gapps/gapps-jb-20121011-signed.zip
-> boot to Recovery ( Mobileuncle Tools, or Quickboot,.... ) -> Install zip from SD-Card , ....
Update 28.03.2013: Working on JB 4.1.2
Here you go at your own risk
Drivers;
CWM 5504 and Root here;
German instruction here
New SP_Flash_Tool_v3.1304.0.119
After extracting the zip file:
1. Debug Mode in the Developer Tools Switch
2. Install the drivers ( others may work better, e.g. pdanet )
3. The superuser-313-arm-signed.zip from third copy to the external SD card
4. Phone off and take out battery
5. using the SPFTools load in directory 2. Scatterdatei -> load and Recovery.img, boot.img and flash (press download and then return battery back)
6. Disconnect the data cable after green OK
7. When switching power and Vol + hold when the Green Man comes release Power and Vol + hold on.
8. In CWM now make complete backup, after this install zip from SDcard install the superuser zip ... JB 4.2.1 may need other tools look here found by #90
9. skip step 7 +8 and install superuser using the MTKdroidtools and make backup (but it takes a relatively long time)
10. You can now delete with MTK Droidtool some China-apps."
PS: Backup Rom made with SPFtools->readback

Thanks for the alert.
I've got a quad core 6589 version, so far cannot find a way to root it..
And it's NetworkLocation.apk is missing, i tried a couple of NetworkLocation.apk from JellyBean gapps zip files, no one seems to work, either not installable, crash on boot or not working.
3G connection seems to be dodgy, H/H+ is shown on the top bar but data is not coming down normally, during 1 minute, only less than 100k data come down and not able to load even 1 page...
Anyone has the same problem?
Cheers,
Fish

star b943 (mtk6589 b94m)
could someone translate recovery menu from Chinese Language

Yes the baseband or antennas seems to be crap.
Start download and remove your hands from the device or take it only with two fingers on the upper side, then my downlads finish and downloads show normal values. Speedtest with upload is seems to be fine,...
If someone needs root or cwm write me pm, or give me public upload location I´m not so experienced with this,...
Best regards

Thanks for the advice

radekfor said:
could someone translate recovery menu from Chinese Language
Click to expand...
Click to collapse
Translate into:
-Factory Reset
-Auto (Overall?) Test
-Manual (Overall?) Test
-Single Function Test
-Test report
-Clear eMMC
-Version Info
-Reboot
Hope this helping.:laugh:

how do you think about the Star N9589?
with same quad core cpu mt6589

haisir said:
how do you think about the Star N9589?
with same quad core cpu mt6589
Click to expand...
Click to collapse
The MT6589 is really good stuff, for me its my personal Favorite , but I would prefer smaller devices with 4-4,7" max screensize.
5,5" and higher does not really fit in any shirt pocket. If I ever have to carry a bag for my phone I would prefer a tablet with much better screens and battery life.
So i´m looking forward to Jiayu G4, G5, UMI X1S, or something similar screensize

cmoegele said:
Update 28.03.2013:
Here you go at your own risk CWM 5504 and Root
Best regards
Click to expand...
Click to collapse
That's great!!!!
Thanks, it worked!
Now I still have two problems:
- amazon app-shop doesn't start (it remains black with amazon logo)
- doesn't vibrate on call in vibration mode
does someone else have the same problems?
Thanks

B94M/B943 quad
Thank you everyone for your hard work and time. I have very little experience (twice with well established models)
I was wondering if someone could clean up the txt instruction translation so someone like me can avoid brick making. Even adding better detail would be sweet. I will copy below. Thanks in advance.
"ATTENTION: The Star B94M is available as dual and quad core version!
The tools here refer exclusively to Star B94M MTK6589 or B943 quadcore devices!
After extracting the zip file:
1. Debug Mode in the Developer Tools Switch
2. Install the drivers
3. The superuser-313-arm-signed.zip from third copy to the external SD card
4. Phone off and take out battery
5. using the SPFTools load in directory 2. Scatterdatei -> load and Recovery.img, boot.img and flash (press download and then return battery back)
6. Disconnect the data cable after green OK
7. When switching power and Vol + hold when the Green Man comes release Power and Vol + hold on.
8. In CWM now either only make complete backup, or install zip from SDcard install the superuser zip ...
9. skip step 7 +8 and install superuser using the MTKdroidtools and make backup (but it takes a relatively long time)
10. You can now delete with MTK Droidtool some China-apps."

bradstallion said:
That's great!!!!
Thanks, it worked!
Now I still have two problems:
- amazon app-shop doesn't start (it remains black with amazon logo)
- doesn't vibrate on call in vibration mode
does someone else have the same problems?
Thanks
Click to expand...
Click to collapse
vibration problem was a wrong setting by my side... still have problems with amazon app-shop (very strange, I've it installed on many devices and different versions of android, jelly bean included)

angryfish99 said:
Thanks for the alert.
I've got a quad core 6589 version, so far cannot find a way to root it..
And it's NetworkLocation.apk is missing, i tried a couple of NetworkLocation.apk from JellyBean gapps zip files, no one seems to work, either not installable, crash on boot or not working.
3G connection seems to be dodgy, H/H+ is shown on the top bar but data is not coming down normally, during 1 minute, only less than 100k data come down and not able to load even 1 page...
Anyone has the same problem?
Cheers,
Fish
Click to expand...
Click to collapse
The MTK chipsets have always been weak on data connection starting from the MTK6573. It's so bad that connection can be lost while my Samsung right beside it has a good connection.
Anybody knows what is wrong with this China made phones?

Star
I managed to root. Thanks for the help guys (sarcasm).......The files that "cmoegele" posted worked except for the usb driver files. I had to use PdAnet for connection. I'll be watching to see what other members find on the camera focus and poor data comms.
Thank You

Data upload is stable, and downlad has good values for a while, but slows down from time to time. So I think the device is not doing completly wrong. There needs to be still some finetuning in Baseband and Rom like man other devices always need.
The performance and quality is really good, even +2 days Batter lifetime is a good value for this powerful device.
I´m waiting for new Roms

fmehrtens said:
I managed to root. Thanks for the help guys (sarcasm).......The files that "cmoegele" posted worked except for the usb driver files. I had to use PdAnet for connection. I'll be watching to see what other members find on the camera focus and poor data comms.
Thank You
Click to expand...
Click to collapse
Hi fmehrtens, may I know the RAM and ROM capacity of your phone model? I am wondering if 8GB ROM and 1GB RAM model can be rooted using same method, thanks.

Spec says 8GB ROM and 1GB RAM, however AnTuTu shows only 1GB ROM and 1GB RAM. Am I missing anything here?

Hello,
I've ordered this new phone Star One B943 Quad core, and i want to thank u for the rooting method ^^
I'm searching for the ROM stock, does anyone have the idea where i can find it ?
And i found that the Miz Z1 is the same phone, but with Android 4.2.1 installed. Do u think it's possible to upgrade the Star OS version with the Miz Z1 firmware ?

B934
windwaver said:
Hi fmehrtens, may I know the RAM and ROM capacity of your phone model? I am wondering if 8GB ROM and 1GB RAM model can be rooted using same method, thanks.
Click to expand...
Click to collapse
It is a 4G ROM and 1G RAM. Just FYI, the first time I tried to root it did not root, I had to try it a couple of times, and then I also loaded the ZIP file on the ROM memory along with the SD card. It worked that time. Not sure if that's what helped or not. The phone is a really nice phone ecpecially after rooting. I am also having trouble with Amazon App store app, Netflix playing too slow and the camera focus.
Good Luck and Thanks!

Neodragon12 said:
Hello,
I've ordered this new phone Star One B943 Quad core, and i want to thank u for the rooting method ^^
I'm searching for the ROM stock, does anyone have the idea where i can find it ?
And i found that the Miz Z1 is the same phone, but with Android 4.2.1 installed. Do u think it's possible to upgrade the Star OS version with the Miz Z1 firmware ?
Click to expand...
Click to collapse
I have got a Copy of the origin Rom done with SPFTools. If it is needed. You also can use the Scatterfile from the zip-file.
Do you have a link for the 4.2.1 Miz Z1 firmware ? Perhaps its a fake,...
Otherwise I will flash it to our device except the Preloader, so if it fails I could go back to stock.

cmoegele said:
Data upload is stable, and downlad has good values for a while, but slows down from time to time. So I think the device is not doing completly wrong. There needs to be still some finetuning in Baseband and Rom like man other devices always need.
The performance and quality is really good, even +2 days Batter lifetime is a good value for this powerful device.
I´m waiting for new Roms
Click to expand...
Click to collapse
May I know the country you using the phone in? I have very bad experience with MTK chipsets with regards to data transfer. Other phones e.g. Samsung, LG do not give me this problem.
How to improve the data performance?

The Lenovo A706 Owners' Thread (Root/CWM/Other Discussions)

The Lenovo A706 Owners' Thread (for Rooting, CWM, and other discussions)
Official Product Page
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
---------------------------------------------------------------------------------------------------------------
Device Specs:
---------------------------------------------------------------------------------------------------------------
SIM Type: Dual Mini-SIM
Band Coverage: GSM 900/1800/1900 MHz (Asia-Pacific)
GSM 850/1800/1900 MHz (Latin America)
WCDMA 900/2100 MHz (Asia-Pacific)
WCDMA 850/1900 MHz (Latin America)
WLAN: 802.11 a/b/g/n with hotspot capability
Display: 4.5" IPS (Can anyone confirm if it has Gorilla Glass?)
Resolution: 480 x 854
Navigation: 5-point capacitive touch
Processor: Quad-Core Qualcomm MSM 8225Q 1.2GHz
OS: Android™ 4.1 Jelly Bean with LenovoMagic UI
Memory: 1GB RAM
Storage: 4GB Internal Storage (eMMC) with memory card slot
Battery: 2000mAh Lithium Polymer user-replaceable
Dimensions: 136 x 69 x 10.4 mm
Weight: 130g
Sensors: A-GPS, Gravitation, Ambient light sensor, Proximity sensor
Camera: Front: 0.3MP fixed-focus, Rear: 5MP auto-focus
FM Radio: Yes
Color: White
---------------------------------------------------------------------------------------------------------------
This is a good budget device when compared to other devices from lead manufacturers like Samsung, Sony, LG or Huawei.
While searching on the internet I did find some Root & CWM installation methods.
I will be updating the relevant posts as and when needed.
You can look in the list below for what you want to do with your device.
ATTENTION!!! READ THIS BEFORE DOING ANYTHING
---------------------------------------------------------------------------------
Friend, there are two versions of this device in the market:
1. A706 (Chinese model)
2. A706_ROW (International Model)
The ROMs in this thread are only for the A706ROW model of this phone unless otherwise stated.
If you have the chinese model or another model A760 (which is a different model) then the ROMs in this thread are not for you.
Model A706 and A760 are two different models with almost same specifications. This DOES NOT mean that the ROMs of A706ROW are compatible with A760.
Please DO NOT confuse Lenovo A706 with Lenovo A760 as these are two different devices!!! Flash or experiment at your own risk!!!!
If you share a ROM link for any of the above devices, then please mention clearly the device for which the ROM can be used.
What to do with your Device ?
-------------------------------------------
DISCLAIMER:
---------------------
Rooting your device VOIDS your warranty. Remember if you are doing this, it is at your own sole responsibility
and I cannot be held responsible for any damage to your device, data loss, or any personal injury as a result of your actions.
And, If you still feel it is worth the effort, proceed with caution!
FOR NOOBS
--------------------
Read the instructions (click on SHOW to read) before attempting anything from the list below!
First you need to have the Android SDK installed on your computer. Or atleast you need to have the adb & fastboot files available on your computer.
Here's a good post that tells you how to setup ADB and fastboot.
Here's a post that has a list of adb/shell commands for noobs.
Ok, once you are done with the setup of ADB & fastboot on your computer, then you can proceed with the below instructions.
--------------------
IMPORTANT NOTE BEFORE FLASHING:
-------------------------------------------------------------
Recently, I have noticed that many people after buying the phone are flashing any firmware to their phones and most of the time without checking the phone versions and the OS versions. In the stock firmware post, I had mentioned that people having the Chinese version of the phone should NOT flash the ROW (international) firmware otherwise it would mess up their phone and network etc.
SOLUTION FOR SIM ERROR & DOWNGRADING TO CHINESE ROM
-----------------------------------------------------------------------------------------------------
Now, some of the people have already done such a mistake and for those people (who are having SIM or network problems and want to go back to chinese ROM, I am sticking this post by danyno1 to the OP:
(Click SHOW to See the quoted post)
----------------------
danyno1 said:
hi
I've just installed the "A706ROW_1_S_2_001_0020_130821 MegaFull"" rom , and now i have no network coverage, it doesnt recognize my simcards
I live in Iran.
what should i do??
is there any way to unlock it ??
please help me with this situation , i'm in a hurry
------------------------------------------
after reading the whole topic posts, and testing all the methods , the problem is solved [thanks to mixbox360's posts.] i'm going to just copy and paste his 2 separated posts.
BEST soloutions for these 2 common problems :
#1 device doesnt recognize simcards
#2 being unable to downgrade to the chinees stock rom
soloution of the #1 problem :
how I fixed: Just Installed the QNeonModern 1.7 ROM... then I installed the update of a chinese ROM from bootdroid (I mean putt the update.qsb file un the sdfuse directory o my sd card, then power and vol+ to enter the menu and selected SD UPDATE)... thats all... I have again my chinese rom with signal for calls untill we discover how to make work the athk board in the ROW roms.
Hope to be helpfull!
Click to expand...
Click to collapse
soloution for #2 problem:
Ok trying again to put my chinese device in ROW rom with sim signal, and found a solution:
1:Flash via droidboot a chinese stock firmware I used the 130325
2:Rooted device with vroot and installed CWM Recovery via ADB
3:In the procedure to install custom rom Qneon one of the steps is to flash boot.img via fastboot... well I just didn´t do this step and flashed directly Qneon_1.7.1.zip via CWM
4: Did data/factory reset, cache reset and dalvik cache reset
5:Reboot system
An Ready! Finally got my chinese device in spanish and sim signal.
Click to expand...
Click to collapse
ENJOY THE DUAL SIM ANTENNA + ROM WITH MULTIPLE LANGUAGES
CREDITS : mixbox360
Click to expand...
Click to collapse
------------------------------------------
For Installing CWM: Go to Post #2
For Rooting: Go to Post #3
For Stock ROMs: Go to post #4
For Custom ROMs: Go to post #5
Credits:
-------------
- Lenovo for making a surprisingly good budget phone
- And users for buying it!
Enjoy your phone and share your thoughts and helpful insights/useful methods with all other users here so that they can benefit from your research.

CWM Installation Instructions:
-------------------------------------------
Make sure you have all the drivers for your phone installed on your computer. Download for A706 from here. Some other Qualcomm drivers (not sure if required)
Make sure you have USB Debugging enabled, Install from Unknown Sources is enabled and device is detected in ADB run this command:
Code:
adb devices
Download the CWM Recovery for A706 from here.
Unzip the downloaded file to get a "recovery.img" recovery image file.
Press SHIFT key + Right mouse click in the folder where the file is located and select Open Command from Here.
Now, in the command prompt do the following:
a. Reboot into Bootloader mode. Use command:
Code:
adb reboot bootloader
b. Device will reboot and display Lenovo logo. (check if device is in bootloader mode by running command:
Code:
fastboot devices
. If you see a device connected then you have successfully rebooted into fastboot mode.
c. Now, run this command:
Code:
fastboot flash recovery recovery.img
(This will flash the CWM recovery image to the device).
d. Once successful, reboot the device using this command:
Code:
fastboot reboot
. Or, you can keep the power+vol up+ vol down buttons pressed to restart.​
If everything has gone well, this should get CWM installed on your device. Your device is still *not rooted*. Once you have installed CWM, please proceed to the ROOT instructions post to *root* your device.
CREDITS:
---------------
This post (in Vietnamese)
This post for Recovery (in Russian)
This post for Drivers links (in Russian)
And, to all the other great Russian/Chinese forums and sites who have such vast info on Lenovo which we need in English

DISCLAIMER: Rooting your device VOIDS your warranty. Proceed with caution!!!
1. CWM ROOT METHOD
-------------------------------------
Ok, so you have successfully installed CWM and need root.
1. Just download this Root for A706 ( CWM flashable zip file)
2. Reboot phone to CWM Recovery (use command: adb reboot recovery)
3. Flash the zip and then restart into OS.
4. Now, you should get the Super user app in the list.
2. VROOT (ONE-CLICK ROOTING) METHOD
------------------------------------------------------------------
For noobs AND people who either don't want to install CWM or are unsure of it's usage and only want root, can use this guide for VROOT one-click rooting method. The guide has been translated and posted on XDA by zhuhang. The original vroot post/method (in chinese) exists on this site.
CREDITS:
---------------
Same as in the CWM post above.
Thanks to zhuhang for posting the VROOT guide in english (translated from chinese).

DISCLAIMER: Follow these instructions at your OWN risk & responsibility. They are provided AS-IS without any liability.
IMPORTANT NOTE BEFORE FLASHING:
-------------------------------------------------------------
Recently, I have noticed that many people after buying the phone are flashing any firmware to their phones and most of the time without checking the phone versions and the OS versions. In the stock firmware post, I had mentioned that people having the Chinese version of the phone should NOT flash the ROW (international) firmware otherwise it would mess up their phone and network etc.
Solution to the problem is now in the OP. Please follow it if you have SIM error or network issue.
STOCK ROM
--------------------
I am posting a list of stock firmware(s) that I can find for the A706 here, along with instructions on how to install it.
FIRMWARE LIST
-------------------------
Build Number: A706_ROW_S018:
Details:
Firmware Type: Official Release
Languages: English, Russian, Chinese, Indonesian & Vietnamese
Build Date: 15/07/2013
OS: Android 4.1.2 with Lenovo Magic UI
Download Link: Get it from here (Lenovo-Forums.ru)
(You need to click on the green button on the page. Once you click there then you need to register and logged in, to download it.)
CREDIT: This post in Russian.​
This post by 5[Strogino] has a list of stock firmwares and links to download them.
INSTRUCTIONS
-----------------------
A memory card is required.
Boot into Android normally.
Connect your phone to your PC/Laptop with a USB cable and when asked (or in USB connection settings), please select USB Mass storage mode to mount SD card.
On the root of the memory card, create a folder called "sdfuse".
Unzip the downloaded firmware, you will get a QSB file.
Copy the QSB file to the sdfuse folder that we created earlier on the root of SD card.
Note: Please make sure that your phone has atleast 60% power before attempting or beginning upgrade. Or keep charger connected during the process.
SD card upgrade process:
Long press VOL UP + POWER_KEY to enter the droidboot,
A menu will appear. Select the fourth option, SDUPDATE.
At the bottom of the screen, you can see the progress and status of the update
When you see the message "SDCARD UPDATE SUCCESS!!!", this means you successfully completed the upgrade process
Now, reboot your device and hopefully it should be updated.
That's it! If you guys have found any more firmware download links (even for different regions, build etc.) just share them with me along with details and I will add them to the list in this post.
CREDIT: Instructions were taken from this post and formatted and edited for better understanding.

A List of Custom ROMs
------------------------------------
QNeon-Modern ROM (based on Russian Firmware but has English too): Visit the original thread (in Russian)
Please do share more ROMs with me so that I can include them in this list.

help!
hello bro! i got stuck at installing the cwm flashable file. it's saying "Verifying update package.... Installation aborted"

gr8techie said:
RESERVED (for a list of Stock ROMs/Stock ROM installation)
Click to expand...
Click to collapse
Thanks,
Very nice thread. Had the phone for a month but no support anywhere. i need the stock rom, if u have pls pm me.
thanks again

scuderialoki said:
hello bro! i got stuck at installing the cwm flashable file. it's saying "Verifying update package.... Installation aborted"
Click to expand...
Click to collapse
scuderialoki, unfortunate that you got stuck. worked for me without any issues. i upped the same file that i used on mediafire. can you re-download the file and then check if the file is ok by extracting the zip using winrar or winzip? if it is ok then try flashing it again.
guliboy123 said:
Thanks,
Very nice thread. Had the phone for a month but no support anywhere. i need the stock rom, if u have pls pm me.
thanks again
Click to expand...
Click to collapse
guliboy123, i will be putting the link and some instructions on the stock rom post soon. bear with me as i have to check the instructions from the russian/chinese sites and then put it up here. in the meantime, i suggest you take a backup of your current ROM (which is stock) using CWM and then try out the QNeon-Modern ROM. remember u need to flash that ROM using CWM.

thanks
scuderialoki, unfortunate that you got stuck. worked for me without any issues. i upped the same file that i used on mediafire. can you re-download the file and then check if the file is ok by extracting the zip using winrar or winzip? if it is ok then try flashing it again.
Click to expand...
Click to collapse
gr8techie thanks for the reply. i really appreciate it. just downloaded the flashable cwm however it's still the same bro. lemme tell you something though. i rooted the devices before using framaroot and everything is ok but i had to do a factory reset through the settings app in A706. i still see the superuser app in the system apps and i cant uninstall it. when i open the superuser app in the drawer it's giving me an error that the su binary is not installed and su cant install it.

scuderialoki said:
gr8techie thanks for the reply. i really appreciate it. just downloaded the flashable cwm however it's still the same bro. lemme tell you something though. i rooted the devices before using framaroot and everything is ok but i had to do a factory reset through the settings app in A706. i still see the superuser app in the system apps and i cant uninstall it. when i open the superuser app in the drawer it's giving me an error that the su binary is not installed and su cant install it.
Click to expand...
Click to collapse
ok, please tell me if you have CWM installed on your device? I believe it is not installed. if this is the case, then you need to flash CWM and then try installing the zip again.
if it is installed then, i believe the super su from previous rooting maybe causing the problem. check on Playstore for a method to unroot your device. or google it. then you need to root again. hope this solves your problem.

thanks
Hi bro thanks for the reply i attached a screenshot of my root validation. I used an app to identify that. And by the way my recovery is installed. I the super su app is killing it

New page for our devices :good:
I had rooted my Lenovo A706 before You made this page You are faster than me , bro :laugh::laugh:
Hope our A706 will have more ROM, Init , Kernel that make it better

Some picture of mine, they are old ones..I am cooking some new thing on A706...:laugh: hope you like

Anyone know how to switch between few apps on lenovo A706?
long press on home button will only show the google now
Changing input method when typing also an issues i met,
anyway to change the input method when typing?

Can someone upload an official updated rom (ROW) for lenovo a706? It'll be much appreciated.

FREE CALLING SERVICE PROBLEM
guys,, may be you can help me... the problem is i can hear what other people are saying in LINE / Skype /Viber but people can't hear anything i said.

Goog, I want it
Sent from my Lenovo A706 using xda premium

silv3rmoon said:
Anyone know how to switch between few apps on lenovo A706?
long press on home button will only show the google now
Changing input method when typing also an issues i met,
anyway to change the input method when typing?
Click to expand...
Click to collapse
Long press in menu button ^^
---------- Post added at 08:20 PM ---------- Previous post was at 08:18 PM ----------
rapnix said:
FREE CALLING SERVICE PROBLEM
guys,, may be you can help me... the problem is i can hear what other people are saying in LINE / Skype /Viber but people can't hear anything i said.
Click to expand...
Click to collapse
just viber bro...because maybe viber isn't usable for us now..i can use skype , line , zalo and every things else nomarly

@trithong.. bro. also in LINE and TALKRAY i encounter this problem some of us already encounter this problem what version do you have? i have A706ROW.. no problem if only chatting but if i want to use calling features that's were i encounter this kind of problem i can here them but they cannot here me

my A706 can't root.
CWM show Installation abort!
Baseband ver
A706ROW_1_A_2_0046_130604
Internal ver
A706ROW_1_S_2_001_0018_130705

[Lava Magnum X604 Rooting Guide & General Discussion]

[ Lava Magnum X604 Rooting Guide & General Discussion ]​
Key Features:
Lava Magnum X604 is a Smart Phone Powered by 6.00-inch HD 720x1280 pixels with 245 Pixels per inch (PPI) display,Android 4.4 KitKat,8 MP Auto Focus with with BSI Sensor for low light imaging and Broadcom 1.2GHz Quad Core processor coupled with Videocore IV GPU alongside 1GB RAM.
​
Rooting & Unlocking:
Code:
[B][SIZE="4"][COLOR="DarkRed"]Before You Begin[/COLOR][/SIZE][/B]
1. This will void the warranty of your device. We won’t be held responsible if you end-up bricking or damaging your device. Do it at your own risk.
2. This should only work on Windows based PCs Preferably Windows-7
3. There should be at least 65% charge in your
4. Make a Backup of Your Contacts,SMS,And Whats App data in SD Card
Code:
[B][SIZE="5"][COLOR="DarkRed"]Downloading Required Files:[/COLOR][/SIZE][/B]
Download Lava Magnum X-604 Root Toolkit [B][URL="https://drive.google.com/file/d/0B7OdRw3ALPgGdWcxOUx0c0llMGs/edit?usp=sharing"]Click Here To Download[/URL][/B]
Code:
[B][SIZE="5"][COLOR="DarkRed"]Preparing Your Windows PC And Magnum X604 for Rooting:[/COLOR][/SIZE][/B]
Extract Downloaded Lava Magnum X604 Root Tool Kit to your Windows PC Desktop
Go to Settings >> Backup & Reset >> Factory data Reset in your Lava Magnum X-604 and Do a factory data Reset and Complete setups after it re-boots
Enable USB Debugging On your Device You can find this option in Settings >>Developer Option >>USB Debugging.
Enable Allow Installation of Apps from Unknown Sources under Settings >> Security >> Unknown Sources also Disable verify apps bellow Unknown Sources
Now Connect your device via USB cable to windows PC and Start installing programs which is provided in tool kit in same order
1.) Adb Driver Installer 2) BRCM_Driver_Package 3.)For Windows x64 Bit/For Windows x32 Bit 4.)VRoot_1.7.8.7753_Setup
Code:
[SIZE="5"][COLOR="DarkRed"][B]Rooting :[/COLOR][/SIZE][/B]
Open installed V-Root Program and Grant USB Debugging Authorization when a pop-up pops in your device Remember to tick always allow option.
When connection is established between V-Root program and your device it will display your device model and Root Button in Opened V-Root Program
If You See Green Colored Root button in V-Root Program Just click it and Wait silently with out touching your device .After some Times Your
Device will reboot (Remember Don't Disconnect USB cable until and Unless V-Root Program show success in your PC )
When you see Success message in PC remove USB Cable and Reboot Your Phone
Now Your Lava Magnum X604 is Rooted
For more Development visit this thread
http://forum.xda-developers.com/showthread.php?t=2875274
If you guys have any doubt regarding This particular device please drop a comment here in this thread I will try to clear it to my best of knowledge...
Please Don't say thanks in words Simply press Thanks Button Which is more Meaning full?
The-Immortal.

Thanks a ton man
Thanks man, this is great. I was desperately in need of this. Will try this over the weekend and let you know if i have any issues.
Looks like you have completed the rooting on your phone, any tips on steps to optimize the phone after the rooting. Its pretty laggy for a 1.2Ghz quad core processor, not sure why? I am planning to remove all the bloatware, and see if i can increase system space for apps. Besides that any further suggestions to improve the speed and responsiveness, that can be achieved by rooting or otherwise?
The-Immortal said:
[ Lava Magnum X604 Rooting Guide & General Discussion ]​
Key Features:
Lava Magnum X604 is a Smart Phone Powered by 6.00-inch HD 720x1280 pixels with 245 Pixels per inch (PPI) display,Android 4.4 KitKat,8 MP Auto Focus with with BSI Sensor for low light imaging and Broadcom 1.2GHz Quad Core processor coupled with Videocore IV GPU alongside 1GB RAM.
​
Rooting & Unlocking:
Code:
[B][SIZE="4"][COLOR="DarkRed"]Before You Begin[/COLOR][/SIZE][/B]
1. This will void the warranty of your device. We won’t be held responsible if you end-up bricking or damaging your device. Do it at your own risk.
2. This should only work on Windows based PCs Preferably Windows-7
3. There should be at least 65% charge in your
4. Make a Backup of Your Contacts,SMS,And Whats App data in SD Card
Code:
[B][SIZE="5"][COLOR="DarkRed"]Downloading Required Files:[/COLOR][/SIZE][/B]
Download Lava Magnum X-604 Root Toolkit [B][URL="https://drive.google.com/file/d/0B7OdRw3ALPgGdWcxOUx0c0llMGs/edit?usp=sharing"]Click Here To Download[/URL][/B]
Code:
[B][SIZE="5"][COLOR="DarkRed"]Preparing Your Windows PC And Magnum X604 for Rooting:[/COLOR][/SIZE][/B]
Extract Downloaded Lava Magnum X604 Root Tool Kit to your Windows PC Desktop
Go to Settings >> Backup & Reset >> Factory data Reset in your Lava Magnum X-604 and Do a factory data Reset and Complete setups after it re-boots
Enable USB Debugging On your Device You can find this option in Settings >>Developer Option >>USB Debugging.
Enable Allow Installation of Apps from Unknown Sources under Settings >> Security >> Unknown Sources also Disable verify apps bellow Unknown Sources
Now Connect your device via USB cable to windows PC and Start installing programs which is provided in tool kit in same order
1.) Adb Driver Installer 2) BRCM_Driver_Package 3.)For Windows x64 Bit/For Windows x32 Bit 4.)VRoot_1.7.8.7753_Setup
Code:
[SIZE="5"][COLOR="DarkRed"][B]Rooting :[/COLOR][/SIZE][/B]
Open installed V-Root Program and Grant USB Debugging Authorization when a pop-up pops in your device Remember to tick always allow option.
When connection is established between V-Root program and your device it will display your device model and Root Button in Opened V-Root Program
If You See Green Colored Root button in V-Root Program Just click it and Wait silently with out touching your device .After some Times Your
Device will reboot (Remember Don't Disconnect USB cable until and Unless V-Root Program show success in your PC )
When you see Success message in PC remove USB Cable and Reboot Your Phone
Now Your Lava Magnum X604 is Rooted
For more Development visit this thread
http://forum.xda-developers.com/showthread.php?t=2875274
If you guys have any doubt regarding This particular device please drop a comment here in this thread I will try to clear it to my best of knowledge...
The-Immortal.
Click to expand...
Click to collapse

boysha8 said:
Thanks man, this is great. I was desperately in need of this. Will try this over the weekend and let you know if i have any issues.
Looks like you have completed the rooting on your phone, any tips on steps to optimize the phone after the rooting. Its pretty laggy for a 1.2Ghz quad core processor, not sure why? I am planning to remove all the bloatware, and see if i can increase system space for apps. Besides that any further suggestions to improve the speed and responsiveness, that can be achieved by rooting or otherwise?
Click to expand...
Click to collapse
Ya you are 100% correct device is laggy out of box because of unwanted bloats and scraps provided by lava as system application ...
Major problem I have seen in device is the default volume level in headset is not at all up to the mark and also the software is not good enough ...
Its clear the mentality of lava is only to push devices to market and achieve their business target. They r not bothered about customer support,updates,and GPL also...
You can refer this thread which I have provided some steps to make default ROM faster .
http://forum.xda-developers.com/showthread.php?t=2875274
Removing unwanted apps listed by me will definitely help you to increase system memory along with lag reduction ..
I will post a SElinux enabled busybox so that we can enable SElinux. Like this.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Also you can try the Fly-On mod to optimise more once you have installed busybox and init.d support ...
I have contacted some of developers to compile CWM Recovery but it seems take a bit time to port it for breadcom chip set
Once this job is done I will be able to produce some custom ROMs as per our requirement .[emoji6]
Sent from my x604 using Tapatalk

unable to download the file keep on getting Sorry, you can't view or download this file at this time.
Too many users have viewed or downloaded this file recently. Please try accessing the file again later. If the file you are trying to access is particularly large or is shared with many people, it may take up to 24 hours to be able to view or download the file. If you still can't access a file after 24 hours, contact your domain administrator. error.

yogii111 said:
unable to download the file keep on getting Sorry, you can't view or download this file at this time.
Too many users have viewed or downloaded this file recently. Please try accessing the file again later. If the file you are trying to access is particularly large or is shared with many people, it may take up to 24 hours to be able to view or download the file. If you still can't access a file after 24 hours, contact your domain administrator. error.
Click to expand...
Click to collapse
Simple its google limitations.....
In India try to download between 11am to 2.30pm ....
Who ever downloaded contact me to make a mirror [emoji12]
It will help other users too....
Sent from my x604 using Tapatalk

Not able to root x604
The-Immortal said:
[ Lava Magnum X604 Rooting Guide & General Discussion ]​
Key Features:
Lava Magnum X604 is a Smart Phone Powered by 6.00-inch HD 720x1280 pixels with 245 Pixels per inch (PPI) display,Android 4.4 KitKat,8 MP Auto Focus with with BSI Sensor for low light imaging and Broadcom 1.2GHz Quad Core processor coupled with Videocore IV GPU alongside 1GB RAM.
​
Rooting & Unlocking:
Code:
[B][SIZE="4"][COLOR="DarkRed"]Before You Begin[/COLOR][/SIZE][/B]
1. This will void the warranty of your device. We won’t be held responsible if you end-up bricking or damaging your device. Do it at your own risk.
2. This should only work on Windows based PCs Preferably Windows-7
3. There should be at least 65% charge in your
4. Make a Backup of Your Contacts,SMS,And Whats App data in SD Card
Code:
[B][SIZE="5"][COLOR="DarkRed"]Downloading Required Files:[/COLOR][/SIZE][/B]
Download Lava Magnum X-604 Root Toolkit [B][URL="https://drive.google.com/file/d/0B7OdRw3ALPgGdWcxOUx0c0llMGs/edit?usp=sharing"]Click Here To Download[/URL][/B]
Code:
[B][SIZE="5"][COLOR="DarkRed"]Preparing Your Windows PC And Magnum X604 for Rooting:[/COLOR][/SIZE][/B]
Extract Downloaded Lava Magnum X604 Root Tool Kit to your Windows PC Desktop
Go to Settings >> Backup & Reset >> Factory data Reset in your Lava Magnum X-604 and Do a factory data Reset and Complete setups after it re-boots
Enable USB Debugging On your Device You can find this option in Settings >>Developer Option >>USB Debugging.
Enable Allow Installation of Apps from Unknown Sources under Settings >> Security >> Unknown Sources also Disable verify apps bellow Unknown Sources
Now Connect your device via USB cable to windows PC and Start installing programs which is provided in tool kit in same order
1.) Adb Driver Installer 2) BRCM_Driver_Package 3.)For Windows x64 Bit/For Windows x32 Bit 4.)VRoot_1.7.8.7753_Setup
Code:
[SIZE="5"][COLOR="DarkRed"][B]Rooting :[/COLOR][/SIZE][/B]
Open installed V-Root Program and Grant USB Debugging Authorization when a pop-up pops in your device Remember to tick always allow option.
When connection is established between V-Root program and your device it will display your device model and Root Button in Opened V-Root Program
If You See Green Colored Root button in V-Root Program Just click it and Wait silently with out touching your device .After some Times Your
Device will reboot (Remember Don't Disconnect USB cable until and Unless V-Root Program show success in your PC )
When you see Success message in PC remove USB Cable and Reboot Your Phone
Now Your Lava Magnum X604 is Rooted
For more Development visit this thread
http://forum.xda-developers.com/showthread.php?t=2875274
If you guys have any doubt regarding This particular device please drop a comment here in this thread I will try to clear it to my best of knowledge...
Please Don't say thanks in words Simply press Thanks Button Which is more Meaning full?
The-Immortal.
Click to expand...
Click to collapse
Hi, Immortal
I tried to root my x604 with the steps you described here, but not able to root it at all !
To hell with vRoot - can't understand those chinese junks ! Even if I have downloaded vRoot 1.7.3 english version, only few lines in english.
Irritation, irritation and irritation - nothing else !
Please suggest some other methods or ways, this one was completely disastrous for me !

vasantec said:
Hi, Immortal
I tried to root my x604 with the steps you described here, but not able to root it at all !
To hell with vRoot - can't understand those chinese junks ! Even if I have downloaded vRoot 1.7.3 english version, only few lines in english.
Irritation, irritation and irritation - nothing else !
Please suggest some other methods or ways, this one was completely disastrous for me !
Click to expand...
Click to collapse
Dude we have twrp + philz recovery so just flash it via adb and flash super user ....that's it all done .....
Sent from my A1 using Tapatalk

Memory problem
Hi i have to say thank to you. Recently i reviewed your article and i rooted my phone with help of your tutorial. But after rooted my internal memory comes to 1.63GB (Previously the internal memory was 5.2GB). Snapshot attached. Please help me on this.
Also can you please let me know how to upgrade my OS to lollipop. Awaiting reply for your reply.

sathish.vadivel said:
Hi i have to say thank to you. Recently i reviewed your article and i rooted my phone with help of your tutorial. But after rooted my internal memory comes to 1.63GB (Previously the internal memory was 5.2GB). Snapshot attached. Please help me on this.
Also can you please let me know how to upgrade my OS to lollipop. Awaiting reply for your reply.
Click to expand...
Click to collapse
@sathish.vadivel hey buddy did you manage to sort this out?
I don't understand how Lava can produce such a nice phone with such a lousy implementation of the OS.

xdababby said:
@sathish.vadivel hey buddy did you manage to sort this out?
I don't understand how Lava can produce such a nice phone with such a lousy implementation of the OS.
Click to expand...
Click to collapse
Please reply for me quotes. I'm waiting for your response.
---------- Post added at 03:15 AM ---------- Previous post was at 02:50 AM ----------
Hi i have to say thank to you. Recently i reviewed your article and i rooted my phone with help of your tutorial. But after rooted my internal memory comes to 1.63GB (Previously the internal memory was 5.2GB). Snapshot attached. Please help me on this.

X604 Not booting up
Sir
I did flashing of my Lava magnum X604 with Flashify app. With this tool i tried to flash the boot.img and recovery.img that is mentioned in this site. Now Neither my phone is not booting up nor it is going into recovery. When i press on the power button is vibrates and then nothing appears.
Please help....
:crying:

Vernee MARS

New VERNEE MARS Modding Thread
New Modding thread for the new model Vernee Mars Helio P10 Octa core Mtk 6757
Vernee MARS MT6757 Octa Core 4G LTE 802.11ac 4GB 32GB Android 6 & 7 Smartphone 5,5 inches
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
​
Everybody are Welcome! :laugh::good:​
MANY THANKS TO OUR MODERATORS TO OPEN AGAIN THIS THREAD !
More attention to the Xda-developers Rules:
http://forum.xda-developers.com/announcement.php?f=256
Many thanks to "SUPER ADMIN" MR. MIKE​
XDA:DevDB Information
Vernee MARS , ROM for all devices (see above for details)
Contributors
ghost45
ROM OS Version: 6.0.x Marshmallow
Version Information
Status: Testing
Created 2017-02-18
Last Updated 2017-03-25

Reserved

Software Section​
New Official firmware:
Lollipop Android 6 (Backup By Hanuma50)
http://www.needrom.com/download/vernee-mars/
Lollipop Android 7 (Backup By Ghost45)
https://mega.nz/#!ph1X2DDQ!N9Jrob7Fla7jxy-FtOETjGqQNH4My5aycBpnfRYo_aI
Drivers :
https://mega.nz/#!D4MnFBCZ!pb-v5EeRixWXb-NRzoi2fZuaYYkclM36-1QisVyBag4
https://www.dropbox.com/s/125r5twipmdt1wn/MT6589 drivers.zip
Recovery Modded
TWRP for Android 6 ported By Hanuma50
https://mega.nz/#!Sd8TnCJQ!skz9TLqSO2z8bM6ZwNA7gO7wph-ZZRqlK64KtlJoQjQ
TWRP for Android 7 ported By Megthebest
https://mega.nz/#!SAE3lbpL!reWHuRKgEI_7xvTcJAchWT9N8bXk62Ay5m0virtolyw
Carliv CWM By Ghost45
CWM Touch for Android 6
https://mega.nz/#!Bh8ViSbA!M29VpZKV7y7_y66nZTweXvgjXi-HGyHchv-SmcOR7tE
Cwm Touch for Android7
https://mega.nz/#!h4EAXbJQ!YrBzqRA44HUJYqvGGVVBpfxbYPAgzu2w1jx4hZsBXlw
Super Su
https://download.chainfire.eu/1021/SuperSU/SR3-SuperSU-v2.79-SR3-20170114223742.zip
Flashtool V.5.xxx
Version Only for last Devices Octa Core
https://mega.nz/#!ikkW2QhB!RK18HNLZUoUO4mpxP77GguN2rzeKS7tRuIAdW-9sDGE
Section setup Software:​
Drivers Installation :
Procedure :
To install the USB drivers VCOM the phone must be turned off and connected to the PC with or without a battery depending on the type of device,
get a screen like this in the device manager of the computer
Once you have installed the terminal will be shown in this way (the COM port may be different)
For those who have problems with the installation of these drivers and have had in the past a terminal mtk
they may have a driver conflict, or even if you just do the confusion and installed it different,
to solve, you can try to use the program
usbdeview:
http://www.nirsoft.net/utils/trans/usbdeview_italian.zip
select all items in that report as VCOM USB Preloader in the Mediatek figure right click Unistall and restart the PC
Installation of the Firmware:
PROCEDURE
1) Setup new Firmware
download the new firmware.
Unzip the compressed file and insert into the firmware folder:
a) recovery modded (is necessary for receive right root)
Phone off without usb cable and possibly removed the battery and put back for a perfect reset .....
and hold mode 'of off without usb cable connected!
Run Flashtool version octa-core ..... select the file, and then scatter firmware upgrade
...... NOW ONLY CONNECT USB CABLE not before!
Wait for the end of the installation procedure of the firmware and eventually restart the phone!
This' whole simplified procedure for installing the original firmware.
How to have right root on Vernee MARS
Procedure
Install one recovery modded through the previous link with flashtool (Flag only preloader and recovery files)
after run through recovery place the supersu zip file and you will receive, after reboot, the right root .
Attention after received the right root is not possible to apply the ota update of new firmwares.​
MANY THANKS TO :
C3C076, Dearlynounou the autors of Xposed modules add on, and
Hanuma,Carliv,Chainfire,MegTheBest, Marsapa,Cleopatra81,Tao,Stahl and all my friends that collaborate with me...​

New Custom Rom for Vernee MARS Based android 7
New Custom Rom Based Android 7
MARS
Details:
- Custom Rom Based Android 7 aosp official firmware (Version For FLASHTOOL)
- Pre root with Busibox
- SuperSu must be installed after installed the custom rom through flashtool
- new launcher add nova basic (must be upgraded to prime version)
- Recovery Cwm Touch
- New melodies added
- Dolby Digital
- New arrows inside
- New tricks and apps .
How Install The Custom Rom V1
1) Step
Download the new firmware.
Unzip the compressed file
Phone off without usb cable ....connected!
Run Flashtool version octa-core ..... select the file scatter,
and then check that all flags are selected
also check if in the menu in the top is selected firmware upgrade
and then push the button download (green arrow) in flashtool ...... NOW ONLY CONNECT USB CABLE not before!
Wait for the end of the installation procedure of the firmware and eventually restart the phone!
This' whole simplified procedure for installing the original firmware.n progress.....
2) Step (Necessary)
This Step is to receive the right root at 100%
(in android 6 & 7 Chainfire have found one new exploit to receive right root correctly in one temporary partition .
for this moment i'm not able to save that partition and so probably in the V2 Custom rom probably will be)
1) reboot in android system (7) after flashing process ..firmware in the step 1
2) So..copy in your exsternal SD card the file supersu xxx 2,79.zip
2) Restart the device in recovery (modded) run installing the compressed file and reboot in android system and you will find the supersu app and the right root .
Files to download :
Custom Rom V1
https://mega.nz/#!4lUFUSKa!zXccQ3zGaqi2y11p5ssp0JKuiT1XsNzMoN9zKwwchgQ
Supersu
https://mega.nz/#!cxUSkYBA!CxmVdoftoSeDGvrnaugsxFKklV7tdFa6GhN5gKgyRTQ​

New Custom Rom for Vernee MARS Based android 6
New Custom Rom Based Android 6
MARS
Details:
- Custom Rom Based Android 6 aosp (official firmware By Hanuma)
(Version For FLASHTOOL)
- Pre root with Busybox
- GravityBox (must be activated after the 2" Step Attention Please ...supersu must be installed first )
- Xstana Xposed modules for changing icons for navigation bar and more..
must be activated after the 2" Step Attention Please ...supersu must be installed first )
- new launcher add last nova 503 (must be upgraded to prime version)
- Recovery Cwm Touch By Ghost45
- New melodies added
- Dolby Digital
- New arrows inside with Xposed modules
- New tricks and Several apps
- SuperSu must be installed after installed the custom rom through flashtool.
How Install The Custom Rom V1
1) Step
Download the new firmware.
Unzip the compressed file
Phone off without usb cable ....connected!
Run Flashtool version octa-core ..... select the file scatter,
and then check that all flags are selected
also check if in the menu in the top is selected firmware upgrade
and then push the button download (green arrow) in flashtool ...... NOW ONLY CONNECT USB CABLE not before!
Wait for the end of the installation procedure of the firmware and eventually restart the phone!
This' whole simplified procedure for installing the original firmware.n progress.....
2) Step (Necessary)
This Step is to receive the right root at 100%
(in android 6 & 7 Chainfire have found one new exploit to receive right root correctly in one temporary partition .
for this moment i'm not able to save that partition and so probably in the V2 Custom rom probably will be)
1) reboot in android system after flashing process ..firmware in the step 1
2) So..copy in your exsternal SD card the file supersu xxx 2,79.zip
2) Restart the device in recovery (modded) run installing the compressed file and reboot in android system and you will find the supersu app and the right root .
Files to download :
Custom Rom V1
https://mega.nz/#!xg9EVBrI!YU8a7gSTRerwPoiaJoZN1inAMFqCbKkD1bhkNN1Y5c8
Supersu
https://mega.nz/#!cxUSkYBA!CxmVdoftoSeDGvrnaugsxFKklV7tdFa6GhN5gKgyRTQ
Many Thanks to:
Hanuma,Carliv,C3C076,Chainfire,MegTheBest, Marsapa,Cleopatra81,Tao,Stahl and all my friends that collaborate with me..​

New Cwm Touch for Android 6 & 7 Right ported
added the link in first page.
Also added link to official android 7 for MARS

"DO NOT SELECT FORMAT ALL "
But Firmware upgrade
to change type of android system
like android 6 to 7 or the contrary.
You will lost your IMEI number and you will receive too many problems!

I'm looking foward to test the new rom

vaorr said:
I'm looking foward to test the new rom
Click to expand...
Click to collapse
Soon the link to my new custom rom.
I have found one problem with supersu that need, in android 7,to be installed in a temporary partition.... So is this the late time to be publish my new custom rom..
Sent from my GT-I9505 using XDA Free mobile app

Reserved

Hi! Do you change anything on bluetooth? Because on the official rom i have a bug! The phone conects with the car bluetooth (hands free Parrot) but i have no sound on phone calls, but if i disconnect my smartwatch i have sound!

vaorr said:
Hi! Do you change anything on bluetooth? Because on the official rom i have a bug! The phone conects with the car bluetooth (hands free Parrot) but i have no sound on phone calls, but if i disconnect my smartwatch i have sound!
Click to expand...
Click to collapse
Try it i have modded several things...bluetooth according me run well.
:laugh:

Hi, I have one of these devices that just won't boot at all (bricked?) I have no idea how to fix this, I have downloaded and tried to do the above without much luck, I did however get the recovery modded twrp for android 7 successfully flashed (I think) but still nothing, any assistance would be most helpful, I would be happy to allow someone to take over my pc, to see if they can figure it out, just getting it to boot up would be a start !

What happened to your phone to make it bricked?

nothing, it came that way , but I can't send it back, if i cant get it working, I'll have to take the financial hit ?

Oh man, that sucks, I'm not techi enough to offer any help.
Hope someone cab help u out

New Custom Rom based android 6 is in Testing Phase ....see details in first page!

Custom Rom V1 Based android 6 is on The Air !
First pages...:laugh:

Is there a thread for Q&A for the Mars, I don't see 1
Can we ask here or not?

AnubuRe said:
Is there a thread for Q&A for the Mars, I don't see 1
Can we ask here or not?
Click to expand...
Click to collapse
This thread is only for custom rom...but ask to me i will try to help you...obvious