i had an old gingerbread phone which don't have inbuilt storage and fully dependable on sdcard even for camera. so i tried to mount some memory of system partition as internal memory by changing in init.rc but somebit i succeeded. the phone created a folder sdcard1 in system partition. but didn't show up in file manager. even around 50 mb will sufficient for me and around 140 mb of system partition is free after deodex my rom and cleaning some files.
Hi,
Would need to know your make and model of device to point you in the right direction for help.
Thanks!
KJ said:
Hi,
Would need to know your make and model of device to point you in the right direction for help.
Thanks!
Click to expand...
Click to collapse
handset is micromaxx and its has Android 2.3.5
Still need the exact model. There are many micro max devices. Some have a section on XDA and some don't. Knowing the model is very important, as doing things that aren't designed for your exact model can cause serious issues.
KJ said:
Still need the exact model. There are many micro max devices. Some have a section on XDA and some don't. Knowing the model is very important, as doing things that aren't designed for your exact model can cause serious issues.
Click to expand...
Click to collapse
its a35 bolt and even i have spice mi 353 same problem. same specification. and also i am using modified spice mi 353 rom on a35 bolt.
Sorry, but there's no section for either device, so you would need to ask for help here,
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck!
Related
Hello friend i m new user, i have problem witch guophone G9500L
Quad core 6589
WVGA 854x480
Rom 4GB
Ram 1GB
problem is when i use oficial rom witch site needrom
now i have big problem phone work but lcd is white and have green line, nothing see.
How can i return to good condition phone ? I try to load many frimeware, and always show white lcd and line. LCD is good before flash all is good.
I think problem is driver lcd, can you hellp me ?
Hi,
I can't find anything relevant on XDA for your device and issue. It sure looks like a hardware issue, but it could be software. Be sure the firmware you are flashing is for your exact model number, nothing else. If it still acts this way, I'd contact the manufacturer.
You can ask for other opinions here though if you wish,
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck!
Darth said:
Hi,
I can't find anything relevant on XDA for your device and issue. It sure looks like a hardware issue, but it could be software. Be sure the firmware you are flashing is for your exact model number, nothing else. If it still acts this way, I'd contact the manufacturer.
You can ask for other opinions here though if you wish,
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck!
Click to expand...
Click to collapse
So, can t use other rom, except chage botloader ??
I try to load many frimeware but always have white lcd?
Cant load similar frimeware ?
You can try a custom rom.... But I'm not sure what you mean by you tried many firmwares? If you flashed firmware made for any other device, except your exact model.... You could have damaged the device.
But please, ask for further help in the thread I linked. I've found nothing that can help you unfortunately.
Thanks!
Darth said:
You can try a custom rom.... But I'm not sure what you mean by you tried many firmwares? If you flashed firmware made for any other device, except your exact model.... You could have damaged the device.
But please, ask for further help in the thread I linked. I've found nothing that can help you unfortunately.
Thanks!
Click to expand...
Click to collapse
i try to load rom via needrom with different firmware, and never brick phone, marked by botloader and upgrade frimeware, phone powers on but there are different forms of the white screen, on the other is completely white and the other with black and green line, can be heard as the phone starts up, running, but no image.
Can you send me link to custom rom ? witch i can try load.
I already said, I can't find anything relevant on XDA for your device. And I gave you a link to post in for help.
XDA Assist is here to help navigate the site, not for support..... And I have pointed you to where to ask for help.
Thanks for understanding, thread closed.
Hi I am new to this yet have leaned so much al ready rooted my android centura tracfone but have gone no further till i buy the pro version of titanium with key so ki may back up my system...any ways Having a tough time with my (Trio 7.85 vQ 4.4.2 android tablet. it has a 16gb internal, 32 gb SD card which has 3 videos on it and 1gb mem...)
yes i am aware it's generic and kind of major low end device, but trying to learn as i go, just so you know rookie mistake and or ignorace already have xposed installer and kitkat sd full accsess,obb on sd , yes I went completely back wards as i know now... OK so ROOT please help with this type of tablet?
Hi,
I can't find anything relevant on XDA for your device. You can try one of the generic root methods at the top of the list here,
XDA Root Directory
If that doesn't help, you will need to ask for help here,
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck!
I have a galaxy core 2. I was trying to check if RoehsoftRamExpander is compatible with the device and so was using Roehsoft SwapCheck app. I couldn't understand if it was testing and I tried with the options there. I clicked on 'SWAP OFF! ALL' and the VMEM bar reading started showing 0/0.
I'm sure that before this it was showing around 100MB over there. I think it was the DefaultSwapMemory of device, right ?
How can I regain that now ??
XDA Visitor said:
I have a galaxy core 2. I was trying to check if RoehsoftRamExpander is compatible with the device and so was using Roehsoft SwapCheck app. I couldn't understand if it was testing and I tried with the options there. I clicked on 'SWAP OFF! ALL' and the VMEM bar reading started showing 0/0.
I'm sure that before this it was showing around 100MB over there. I think it was the DefaultSwapMemory of device, right ?
How can I regain that now ??
Click to expand...
Click to collapse
Hello, and thank you for using XDA Assist!
There are probably ways in figuring out the proper value. If one knew which partition the swap uses/used, one could determine it's size with a disk tool in read-only mode.
At any rate, since I don't know the value, my hope is to find other users of the same device can help you determine it. Please create an account, so you can post in other forums.
A couple of your fellow users can be found here in this thread:
> General discussion > General > Samsung Galaxy Core 2 G355H
Also, this tag is where your device resources can be found:
http://forum.xda-developers.com/t/galaxy-core-2
Hope this helps, and good luck!
Hi, I would want change the memory partición, and get more apps space, and less files storage (or use al tjr infernal memory for apps). Thanks
XDA Visitor said:
Hi, I would want change the memory partición, and get more apps space, and less files storage (or use al tjr infernal memory for apps). Thanks
Click to expand...
Click to collapse
Hello, and welcome to XDA!
I would highly advise against that. This device has very little exposure, and no development. Which means if a mistake happens (or if you do everything right and something still goes wrong), you will end up with an expensive paperweight, probably until the end of days.
If you have a MicroSD slot and are rooted, try Link2SD. It got me through some tough times.
If you want to get an idea of the support your device has, take a look here:
> Android Development and Hacking > Android Q&A, Help & Troubleshooting > [Q] Please help, No.1 S7 "Samsung Galaxy s5 clone
...if you want to revisit the partitioning idea, feel free to post there, but don't do anything until you get a helpful reply from someone who owns the device as well.
Hope this helps, and good luck!
Dear friends, I have a non-branded china 7 inch tablet phone, dual sim, with MTK 6582 chipset, 8 GB ram. It had 1 GB phone memory and 5 GB internal storage. I tried to put new EBR files by SP-Flash tool to make the partitions equal. It did not work as the EBR files were not right. By mistake I failed to make a backup, and I do not have the original EBR files. Now the phone does not boot. It still detectable by the computer in preloader state. I would be really grateful if anyone could help with this.
dfarukh said:
Dear friends, I have a non-branded china 7 inch tablet phone, dual sim, with MTK 6582 chipset, 8 GB ram. It had 1 GB phone memory and 5 GB internal storage. I tried to put new EBR files by SP-Flash tool to make the partitions equal. It did not work as the EBR files were not right. By mistake I failed to make a backup, and I do not have the original EBR files. Now the phone does not boot. It still detectable by the computer in preloader state. I would be really grateful if anyone could help with this.
Click to expand...
Click to collapse
Greetings,
Thank you for using XDA Assist. Please ask your questions here:
Android Q&A, Help & Troubleshooting
You'll get expert advice there. Good luck!
The_Merovingian said:
Greetings,
Thank you for using XDA Assist. Please ask your questions here:
Android Q&A, Help & Troubleshooting
You'll get expert advice there. Good luck!
Click to expand...
Click to collapse
Thanks, I will do that.
Regards, Farukh