I have a UNO3 Tablet with an A13 Cortex A8 1.2GHz this is from PMSinternational, now i followed their guide to updating the tablet as the tablet was really slow. update was a success as shown by the software, however when the tablet boots up it seems as though the touchscreen is not responding as all the buttons work. how may i resolve this issue....i have asked the same question to pms today as well. PLEASE HELP!!
Related
Hi There!
I Have bought one "ching ling" Tablet. It uses processor Telechips of 1Ghz, have 512MB of RAM and 8GB TTF included. it have to some cool things, like hdmi out and 3g dongle support that works fine using a ZTE MF190.
My android in this tablet is v2.3.3 Gingerbread.
But I have a little problem.
I turn it on, I calibrate the touch screen (it's resistive), now everything is perfect, my touch are working good, but when I restart my tablet, i need to re-calibrate the touch screen. I've made a factory reset but this error persist.
anything erase the configuration.
How I can fix it? It's very boring.
PS: Sorry for my bad english.
Thanks for the help.
Hey guys, I need some major help...
So I was given a Impression i7 Tablet from Leader International.
I have done plenty of research on this tablet, and I do know that support is limited and problems are abundant. Here are some of the things I need help with or it if it to much trouble, I will just take it back.
When I load it, it load all the way up to the homescreen, but I have no touch screen function and the buttoms at the bottom do not light up. I have used the reset button multiple of times with no luck.
Then I have tried to install the Android Drivers Rev 4 but they seem to not install on my computer. (Windows 7)
Also has anyone been able to root this device.
I hope to get some answers. I dont want to take it back unless I have to. (I like to hack away at android devices)
Thanks Everyone!!
the tablet 7 inch have place to put sim card or only tablet 10.1 ?
the leader i7 is a rebrand of another tablet. Find that tablet and youll have your answer.
I have searched the forum and I didn't find anything relating to this specific pad and I apologize if this breaks forum rules to start this post.
I bought a Sanei N90 9.7" Cube tablet with android 4.0.3 and I installed the newest firmware upgrade. I am having an issue when the pad is in portrait mode the touch keys will not respond and in either mode, the screen seems to be off calibration. Is there a screen calibration tool for android 4.0.3 tablets or how do I access the screen calibration mode?
Also, are there custom rom's that can flashed to this pad? As long as the rom is for an android 4.0 tablet, can I flash this tablet with it?
Any help would be greatly appreciated. Thank you
Rocky21 said:
I have searched the forum and I didn't find anything relating to this specific pad and I apologize if this breaks forum rules to start this post.
I bought a Sanei N90 9.7" Cube tablet with android 4.0.3 and I installed the newest firmware upgrade.
Click to expand...
Click to collapse
Hi, I came across this tablet in a post at tabletrepublic.com/forum/android-tablet-reviews/jxd-s9000-first-impressions-will567-1331-2.html#post14214 (sorry cant post urls yet).
I do not know anything more about it but talk to McBub and see if it can use the same Roms as MOMO11 and the others discussed in that thread. Please post any reply you get here as I am interested too.
Apart from those issue, do you like the device? Build quality good?
BT works (BT is the reason I am considering it instead of a momo11)?
Another sanei n90 discussion: tabletrepublic.com/forum/android-tablet-reviews/sanei-n90-review-1385.html
Ps. It seems to be called Ampe A90 as well (sometimes sold with/without BT according to specs)
I got one of this from mcBub: performance are ok, but build quality is awful, the display has a bleeding light on the top (where is the camera), brightness float every time i touch it especially with white background, the frame isn't really on place. I'had support from mcBub, with their times (slowly) but they take care of my situation and send me a new firmware to solve the problem, now the brightness floating is barely visible for an half second after touching the touch and the tablet doesn't freeze anymore.
Color Problems
Hello,
Anybody a similar problem to this:
My tablet twist the grey color with blue, and the black color as red points...
Is this a firmware problem or hardware?
Thank You
RRS
Lenovo K1 IdeaPad Tablet
Google Android 3.1 OS (Honeycomb, API Level 12)
nVidia Tegra 2.0 T20 1.0 GHz processor
——————————————————————————
My K1 IdeaPad tablet is obstructed from getting to its home screen and reboots after the nVidia logo completes in an endless loop. Completely draining the battery does no good, and Lenovo advises me that on a hardware issue such as this the tablet has to be completely wiped. Even though I build my own computers I have never flashed the ROM on my desktop (let alone an Android Tablet) so my options are to fork over to Lenovo's out-of-warranty repair services or do it myself.
There is only one thing scarier to me than physically opening my tablet, wiping her drive, and flashing her ROM, and that's paying Lenovo to do it for me! I'm opening her up; I may not be sober while I do it.
I will follow XDA's expert guidance on walking me through this, but I have one question first.
As you can see above, the version of Android OS on my tablet is 3.1. As long as I'm going to throw caution to the wind and wipe the drive, is it possible for me to install the latest Android version? or will I be stuck in Honeycomb forever? Thanks guys, you are just the greatest!
coydroid
Bought this unbranded unit direct from China (alibaba) last year and unit 'packed up'after a month or so. (seller was not helpful in the least and basically ignored me)
Looking at the various threads on the forum, it seems my unit is the OUKU, however when purchased the website called it' ''ETRONS'''
here's what I do know, again from seller's listing:
AN21, PURE 3G WI-FI, ANDROID 4.2, CPU FREESCALE 1.MX535D , CORTEX A9 DUAL CORE, IGHZ ,RAM DDR3, 1G RAM, INAND MEMORY 8G, WITH DVD-T
Unit came with the requested Australia maps and has a touch screen
I have in my own amateur way tried to reset and also pressed the reset/volume buttons that then goes to ''start update followed by end update'' and then nothing !!
upon start, I do get the green android logo followed by the the next screen that has ANDROID that flashes across... Nothing after this at all (although the reversing camera works)
Please help as cannot buy another unit.
Based upon some posts, and helpful suggestions I have tried to download various updates ? onto micro sd card and then tried to reset as described above, but still get start update followed by end update and then nothing ! How do I correctly download anything suggested correctly 'into the 'root'of the sd card (if this is what I am doing wrong ?)
Thanks in anticipation
Raj
XDA Visitor said:
Bought this unbranded unit direct from China (alibaba) last year and unit 'packed up'after a month or so. (seller was not helpful in the least and basically ignored me)
Looking at the various threads on the forum, it seems my unit is the OUKU, however when purchased the website called it' ''ETRONS'''
here's what I do know, again from seller's listing:
AN21, PURE 3G WI-FI, ANDROID 4.2, CPU FREESCALE 1.MX535D , CORTEX A9 DUAL CORE, IGHZ ,RAM DDR3, 1G RAM, INAND MEMORY 8G, WITH DVD-T
Unit came with the requested Australia maps and has a touch screen
I have in my own amateur way tried to reset and also pressed the reset/volume buttons that then goes to ''start update followed by end update'' and then nothing !!
upon start, I do get the green android logo followed by the the next screen that has ANDROID that flashes across... Nothing after this at all (although the reversing camera works)
Please help as cannot buy another unit.
Based upon some posts, and helpful suggestions I have tried to download various updates ? onto micro sd card and then tried to reset as described above, but still get start update followed by end update and then nothing ! How do I correctly download anything suggested correctly 'into the 'root'of the sd card (if this is what I am doing wrong ?)
Thanks in anticipation
Raj
Click to expand...
Click to collapse
Hi Raj,
there is not much about DVD players on xda.
I found the following threads:
Rooting chinese car dvd player with android by Jezze83
OUKU Unbranded
But nothing really helpful to solve your issue IMO.
If you register on xda, you can ask in the Off-topic forum ... as xda is mainly about smartphones and tablets.
Good luck !