Related
*********
Hi,
down there you find the original thread/question but i think the only possibility to keep the data on a Sensation with not working touchscreen may be to flash a system.img from a RUU and hope it boots.
Is it possible to flash system.img via fastboot with a locked S-ON Sensation?
Thanks
Regards
Daniel
*********
Hello,
my GF owns a unrooted S-ON completely stock Sensation and did the official german t-mobile update (sorry we did not write the number down).
After the update the phone boots but the touchscreen does not work. You can't enter the pin code and also the volume buttons does not work. Only the power button works "a little bit". You can turn on / off screen but you can't open the shutdown menu.
I can enter Bootloader but as it's locked i don't know what i can do there.
Is it possible to mount the file system to backup some data?
Or is there any other way to apply a official htc firmware WITHOUT DELETING ALL USER DATA?
Thank you very much
PS I should have rooted / s-offed it before, damn it... ;-)
Wrong thread, this should go in Q&A section
Sent from my HTC Sensation XE with Beats Audio Z715e using xda premium
Okay sorry - could someone move it please?
Anyone?
Sent from my Desire HD using XDA App
Okay another idea.
Is it possible to extract a german T-Mobile RUU and just flash the system.img via fastboot? Do i have a chance to make it work again this way?
Or is it not possible to flash system.img when the phone is stock?
hey... i got the same problem.. tried a few things but still no working sensation :/
What did you try?
I think running a T Mobile RUU should work (but the user data is beeing deleted)
Sent from my Desire HD using XDA App
no, there is till now no matching tmob ruu :/
So is it only possible to run a RUU with the exactly same version as on the phone?
please help me
Dacoco said:
*********
Hi,
down there you find the original thread/question but i think the only possibility to keep the data on a Sensation with not working touchscreen may be to flash a system.img from a RUU and hope it boots.
Is it possible to flash system.img via fastboot with a locked S-ON Sensation?
Thanks
Regards
Daniel
*********
Hello,
my GF owns a unrooted S-ON completely stock Sensation and did the official german t-mobile update (sorry we did not write the number down).
After the update the phone boots but the touchscreen does not work. You can't enter the pin code and also the volume buttons does not work. Only the power button works "a little bit". You can turn on / off screen but you can't open the shutdown menu.
I can enter Bootloader but as it's locked i don't know what i can do there.
Is it possible to mount the file system to backup some data?
Or is there any other way to apply a official htc firmware WITHOUT DELETING ALL USER DATA?
Thank you very much
PS I should have rooted / s-offed it before, damn it...
Click to expand...
Click to collapse
My device doesn't start, only I can see is HTC logo in start, I flashed a new Rom but it didn't work, some peoples said that my device ruu is currupt, can anyone please give link to system.img?
Ahmedsiar24 said:
My device doesn't start, only I can see is HTC logo in start, I flashed a new Rom but it didn't work, some peoples said that my device ruu is currupt, can anyone please give link to system.img?
Click to expand...
Click to collapse
Please start a new thread, is the htc logo in black with four "!" signs at the edges of the screen? please give us more information about the phone(s-off?). also there are lots of RUUs in this link, you can just try them or manually pull the files you want from them.
m.m.m said:
Please start a new thread, is the htc logo in black with four "!" signs at the edges of the screen? please give us more information about the phone(s-off?). also there are lots of RUUs in this link, you can just try them or manually pull the files you want from them.
Click to expand...
Click to collapse
Thanks but I couldn't found system.img
And my device is pyramid s-off
Ahmedsiar24 said:
Thanks but I couldn't found system.img
And my device is pyramid s-off
Click to expand...
Click to collapse
Type fastboot getvar all
Post everything except imei and serial number
all info
rzr86 said:
Type fastboot getvar all
Post everything except imei and serial number
Click to expand...
Click to collapse
INFOversion: 0.5
INFOversion-bootloader: 1.27.0000
INFOversion-baseband: 11.23.3504.07_M2
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 3.32.61.51
INFOserialno: SH17MV803118
INFOimei: 358313041667499
INFOproduct: pyramid
INFOplatform: HBOOT-8260
INFOmodelid: PG5813000
INFOcidnum: ORANG001
INFObattery-status: good
INFObattery-voltage: 3854mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: 617f0a98
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
Ahmedsiar24 said:
INFOversion: 0.5
INFOversion-bootloader: 1.27.0000
INFOversion-baseband: 11.23.3504.07_M2
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 3.32.61.51
INFOserialno: SH17MV803118
INFOimei: 358313041667499
INFOproduct: pyramid
INFOplatform: HBOOT-8260
INFOmodelid: PG5813000
INFOcidnum: ORANG001
INFObattery-status: good
INFObattery-voltage: 3854mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: 617f0a98
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
Click to expand...
Click to collapse
your device is on S-ON not S-OFF
you can use a ruu.exe for your region but unfortunately there is no ics for your device
and with S-ON you can't downgrade
maybe with a goldcard you can by pass it but i am not sure
by the way is your bootloader locked or unlocked?
info
rzr86 said:
your device is on S-ON not S-OFF
you can use a ruu.exe for your region but unfortunately there is no ics for your device
and with S-ON you can't downgrade
maybe with a goldcard you can by pass it but i am not sure
by the way is your bootloader locked or unlocked?
Click to expand...
Click to collapse
It's unlocked
Ahmedsiar24 said:
It's unlocked
Click to expand...
Click to collapse
flash 4ext recovery
take it from here
http://d-h.st/rG7
extract the recovery.img and flash it via fastboot command
the command is fastboot flash recovery recovery.img
then from for 4ext:
format all partitions except sdcard
enable smartflash(because you are on S-ON)
flash a custom rom
done
note: enable smartflash exactly before flashing the rom
My device is now s-on, and can't boot into system(system partition must have been erased by my stupid behavior). It's stuck at the splash screen and then reboot, repeating this process endlessly.
Now it can boot into bootloader and recovery, but can't install pg58img.zip(it said "wrong image or no image") or any third party rom.
Information of the bootloader is listed as follows:
***unlocked***
pyramid pvt ship s-on rl
hboot-1.23.0000
radio-11.19.3504.29.2
……
My phone has already got supercid 11111111, Asia Pacific version.
Some fastboot command can be executed, but can't erase or change system partition.
Here is some information of my device:
INFOversion: 0.5
INFOversion-bootloader: 1.23.0000
INFOversion-baseband: 11.19.3504.29_2
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 3.12.401.102
INFOserialno: *************
INFOimei:****************
INFOproduct: pyramid
INFOplatform: HBOOT-8260
INFOmodelid: PG5813000
INFOcidnum: 11111111
INFObattery-status: good
INFObattery-voltage: 4018mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: baf31577
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
finished. total time: 0.492s
Since PG58IMG.zip and recovery can't solve the problem, i decide to try official ruu. So which version of ruu should try? Europe? Asia WWE? Or anything else?
While i falshed some ruu, Error 155 occured. What does this error mean? Does it mean the district of the ruu is wrong? Or the version is too low?
Please help me and i can't send it to official custom services because it was not supposed to be distributed in my country. Any advice would be appreciated. Thank you in advance.
I would try any Pyramid_LE RUU, just to see if you can get it back running. Once you have it working (even in english) you can then do a lot more move forward.
Google "RUU_Pyramid_LE_HTC_Europe_1.73.401.4_Radio_10.58.9035.00U_10.15.9035.02_2_release_220036_signed" for a download site, the link on this site to Filefactory is crap (they are going down the toilet).
tlgerdes said:
I would try any Pyramid_LE RUU, just to see if you can get it back running. Once you have it working (even in english) you can then do a lot more move forward.
Google "RUU_Pyramid_LE_HTC_Europe_1.73.401.4_Radio_10.58.9035.00U_10.15.9035.02_2_release_220036_signed" for a download site, the link on this site to Filefactory is crap (they are going down the toilet).
Click to expand...
Click to collapse
Thank you for advice. I have tried the method you mentioned. It still stopped because of error 155
The official answer it 155 is
ERROR [155~159]: IMAGE ERROR
One of these error messages will appear when you use the incorrect RUU to update and the image file size is larger than the Flash ROM size. In this case, download the correct RUU version and try again
Is yours an XE or standard Sensation?
ther is a thread for shiped ruu in android development section.
Sent from my HTC Sensation XE with Beats Audio using XDA App
tlgerdes said:
The official answer it 155 is
ERROR [155~159]: IMAGE ERROR
One of these error messages will appear when you use the incorrect RUU to update and the image file size is larger than the Flash ROM size. In this case, download the correct RUU version and try again
Is yours an XE or standard Sensation?
Click to expand...
Click to collapse
Mine is standard sensation. And i'm sure it's asia pacefic version. Even though i flash the corresponding ruu, error 155 still occured
try new firmware for the phone model you have, replace that before you start the RUU stuff
http://forum.xda-developers.com/showthread.php?t=1459767
I think your issue is S-ON. I read in another post that if you have S-ON you can flash RUUs that are newer than your base, but you cant flash older ones than what it thinks you have currently have.
That's exactly it, you first need an older HBOOT to flash an older RUU
plz help me
i need the latest ruu for sensation xe htc__044
it's urgent
thanks in advance
foxthemene said:
plz help me
i need the latest ruu for sensation xe htc__044
it's urgent
thanks in advance
Click to expand...
Click to collapse
If I understand correctly htc__044 is Asia WWE, here is the RUU:
http://www.androidruu.com/getdownlo...0U_10.51.9007.27_M3_release_198358_signed.exe
(will download immediately)
For other RUUs:
http://www.androidruu.com/index.php?developer=Pyramid
foxthemene said:
plz help me
i need the latest ruu for sensation xe htc__044
it's urgent
thanks in advance
Click to expand...
Click to collapse
Hi,
Are you s-off?
Supercid?
i tried the ruu u mentioned but it didn't work
it gives me error
update from 3.33.707.151 to 1.35.707.1
i am s-on
and cid htc__044
foxthemene said:
i tried the ruu u mentioned but it didn't work
it gives me error
update from 3.33.707.151 to 1.35.707.1
i am s-on
and cid htc__044
Click to expand...
Click to collapse
Hi,
So, what version-main do you have?
If you are s-on ,it is much harder to match up the RUU,version-main, and cid.
They all have to match,or else the RUU will not work.
Can you do :
Code:
fastboot getvar version-main
malybru said:
Hi,
So, what version-main do you have?
If you are s-on ,it is much harder to match up the RUU,version-main, and cid.
They all have to match,or else the RUU will not work.
Can you do :
Code:
fastboot getvar version-main
Click to expand...
Click to collapse
Hi, I have the exact same problem with foxthemene. And I also have tried the given RUU 1.35.707.xxx. And it doesn't work, it keep giving 155 ERROR UNKOWN.
So here it is my getvar all
version: 0.5
version-bootloader: 1.27.0000
version-baseband: 11.24A.3504.31_M
version-cpld: None
version-microp: None
version-main:
serialno:
imei:
product: pyramid
platform: HBOOT-8260
modelid: PG5813000
cidnum: HTC__044
battery-status: good
battery-voltage: 4047mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: 617f0a98
hbootpreupdate: 11
gencheckpt: 0
Click to expand...
Click to collapse
I notice the version-main is no longer there. It shows up the first time I run the RUU, but after it failed, the version-main is gone.
So right now I'm confused, where exactly is the RUU for my CID? I upgraded this device using OTA, is that why there is no apparent RUU for my CID. How about factory images (the one they used for brand new Sensation), surely HTC have RUU for the base factory images, no?
aaulia said:
Hi, I have the exact same problem with foxthemene. And I also have tried the given RUU 1.35.707.xxx. And it doesn't work, it keep giving 155 ERROR UNKOWN.
So here it is my getvar all
I notice the version-main is no longer there. It shows up the first time I run the RUU, but after it failed, the version-main is gone.
So right now I'm confused, where exactly is the RUU for my CID? I upgraded this device using OTA, is that why there is no apparent RUU for my CID. How about factory images (the one they used for brand new Sensation), surely HTC have RUU for the base factory images, no?
Click to expand...
Click to collapse
Hi,
Firstly ,please remove your serial number and imei number.
You have a ICS/JB firmware, so a 1.35 RUU which is meant for GB , will not work.
I am not sure why your version main would disappear.
What happens when you boot up your phone?
Do you still have the update?Can you run it?
Is you phone a Sensation, or the XE version?
malybru said:
Hi,
Is you phone a Sensation, or the XE version?
Click to expand...
Click to collapse
depending from the MID i think it is the normal sensation
malybru said:
Hi,
Firstly ,please remove your serial number and imei number.
You have a ICS/JB firmware, so a 1.35 RUU which is meant for GB , will not work.
I am not sure why your version main would disappear.
What happens when you boot up your phone?
Do you still have the update?Can you run it?
Is you phone a Sensation, or the XE version?
Click to expand...
Click to collapse
Hi yes my device is normal Sensation, honestly I don't know why my version-main would disappear. But at least after digging deeper for a while I finally manage to flash CM 9.1.0 into my device, so at least it's now usable.
====
Woops, thanks, I removed them, sorry I kind of in a panic, didn't realize I just copy-pasted all of it
====
So this is the whole story, and what I know... hope this would help...
EDIT: I have HBOOT 1.27 (UNLOCKED) and S-ON
First, It started out with 4.0.3 (ICS) device that came from OTA (this was previously my wife's and I didn't touch it with custom rom, etc), when I received it. So the first think I do is do HTCDev unlock, it went smoothly, I installed TWRP (my favourite, but it seems I make a mistake here), it installed SuperSU, and I got root.
After that, I want to try custom ROM because I really dislike how slugish Sense is (I tried to like it, disable bunch of apps, but coming from Nexus, it's just doesn't feel right). So with my previous phones, I always have the original factory image(s) for fallback just incase I screw up . So after searching for a while, the only one RUU that I found that most likely work with my device is the 1.35.707 RUU (I didn't realize it was for GB).
Feeling safe after I got it, I went ahead and flash Albinoman's CM 10.2 using TWRP, and it stuck in a bootloop spectacularly . At this point everything is still normal, in terms of version-main, etc. So I think what the hell, let's flash RUU. So I tried it, put the device in fastboot, relocked, fireup RUU, at first it works, detect all the version, then it failed with 155 UNKNOWN ERROR after "updating signature" step, every single time (I tried couple of times). The version-main started missing after the first flash, the 2nd flash there is no
version: x.xxx.xxx to version x.xx.xx
Click to expand...
Click to collapse
just
From version: <blank> to version x.xx.xx
Click to expand...
Click to collapse
Now I remember in the past, updating my sister in-law's Rhyme, this also happen, but somehow, it succeeded in updating the device anyway. So I didn't think too much of it.
So, after hitting the wall for a while, I looked up why people love 4ext so much for HTC devices, turn out there is this SmartFlash thing and how flashing boot.img is tricky. Well I switch to 4ext 1.0.0.5 and flash CM 9.1.0 (just want to be safe, so I didn't flash Albinoman again). And what do you know, it works .
So that is my story so far. I just want to know is there any ICS RUU to fallback to stock for my Device or do I have to SuperCID to get it from other Device. or Maybe I have to downgrade firmware, install GB RUU and then update through OTA (or maybe I have to search for the OTA also).
in order to downgrade you have to S-OFF and supercid
then you can use the gb RUU which also downgrades firmware and hboot version
after that just do the official update
about OTA it could be a possibility to use it but you must have stock recovery
edit:i just saw your edit.you are already in ics firmware
HELP ME
I NEED SHIP ROM HTC ONE MINI DIRTRIST ASIS
INFORMATION:
INFOversion: 0.5
INFOversion-bootloader: 2.22.0000
INFOversion-baseband: 1.24.40e.00.26
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 3.10.707.3
INFOversion-misc: PVT SHIP S-ON
INFOserialno: HT428WA01630
INFOimei: 355865057500040
INFOmeid:
INFOproduct: m4_u
INFOplatform: HBOOT-8930
INFOmodelid: PO5810000
INFOcidnum: HTC__044
INFObattery-status: good
INFObattery-voltage: 4313mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: dirty-09ff2ded
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
hhmobile said:
HELP ME
I NEED SHIP ROM HTC ONE MINI DIRTRIST ASIS
INFORMATION:
INFOversion: 0.5
INFOversion-bootloader: 2.22.0000
INFOversion-baseband: 1.24.40e.00.26
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 3.10.707.3
INFOversion-misc: PVT SHIP S-ON
INFOmeid:
INFOproduct: m4_u
INFOplatform: HBOOT-8930
INFOmodelid: PO5810000
INFOcidnum: HTC__044
INFObattery-status: good
INFObattery-voltage: 4313mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: dirty-09ff2ded
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
Click to expand...
Click to collapse
Hi,
You should edit your post and remove :
INFOserialno:
INFOimei:
Hey,
I have a HTC Sensation which hasn't been switched on for about a year. I recently decided to blow the dust off it and have a play around however when I powered it on it is constantly cycling. It lights up and then restarts. After about the 10th restart I get the HTC logo and then it just sits there without moving any further forward.
When I used the phone last it was rooted and also had the bootloader unlocked and the Clock Work Mod is installed (whatever version was the newest a year ago). If I attempt to access CWM I can see the screen flash up but then the device resets.
Attempting to flash it by the HTC updater fails due to it not finding the phone.
Anyone have any suggestions?
Thanks!
Pasting said:
Hey,
I have a HTC Sensation which hasn't been switched on for about a year. I recently decided to blow the dust off it and have a play around however when I powered it on it is constantly cycling. It lights up and then restarts. After about the 10th restart I get the HTC logo and then it just sits there without moving any further forward.
When I used the phone last it was rooted and also had the bootloader unlocked and the Clock Work Mod is installed (whatever version was the newest a year ago). If I attempt to access CWM I can see the screen flash up but then the device resets.
Attempting to flash it by the HTC updater fails due to it not finding the phone.
Anyone have any suggestions?
Thanks!
Click to expand...
Click to collapse
if you can boot to the bootloader make sure that is says fastboot usb while connecting to pc
then try to install ruu.exe again
rzr86 said:
if you can boot to the bootloader make sure that is says fastboot usb while connecting to pc
then try to install ruu.exe again
Click to expand...
Click to collapse
Thanks for the response, what's ruu.exe?
Pasting said:
Thanks for the response, what's ruu.exe?
Click to expand...
Click to collapse
then what did you mean by <<Attempting to flash it by the HTC updater fails due to it not finding the phone.>>
hi
i have also 1 bricked htc sensation
I cant run ruu.exe
i download
RUU_PYRAMID_ICS_HTC_Europe_3.32.401.5_R_Radio_11.69.3504.00U_11.22.3504.07_M_release_252064_signed
i have htc sensation (from my friend)
***RELOCKED****
ACE PVT SHIP S-ON RL
HBOOT - 2.00.0029
MICROP-0438
RADIO-26.14.04.28.M
eMMC-boot
DEC 22 2011, 14:28:19
i try download ruu ( RUU_PYRAMID_ICS_HTC_Europe_3.32.401.5_R_Radio_11.69.3504.00U_11.22.3504.07_M_release_252064_signed )
but after boot in fastboot mode, he drop in other mode, and dont see phone, only i have black HTC screen logo
what i can to do ? please help
i try also flash another rom with clockworkmode 5.8.1.5 that is also reach in phone, but say not singed or what, try to wipe all, nothing
rzr86 said:
then what did you mean by <<Attempting to flash it by the HTC updater fails due to it not finding the phone.>>
Click to expand...
Click to collapse
Hey, sorry I'm just not used to it being called ruu.exe. I can't even access the bootloader. Any other suggestions?
dadoremix said:
hi
i have also 1 bricked htc sensation
I cant run ruu.exe
i download
RUU_PYRAMID_ICS_HTC_Europe_3.32.401.5_R_Radio_11.69.3504.00U_11.22.3504.07_M_release_252064_signed
i have htc sensation (from my friend)
***RELOCKED****
ACE PVT SHIP S-ON RL
HBOOT - 2.00.0029
MICROP-0438
RADIO-26.14.04.28.M
eMMC-boot
DEC 22 2011, 14:28:19
i try download ruu ( RUU_PYRAMID_ICS_HTC_Europe_3.32.401.5_R_Radio_11.69.3504.00U_11.22.3504.07_M_release_252064_signed )
but after boot in fastboot mode, he drop in other mode, and dont see phone, only i have black HTC screen logo
what i can to do ? please help
i try also flash another rom with clockworkmode 5.8.1.5 that is also reach in phone, but say not singed or what, try to wipe all, nothing
Click to expand...
Click to collapse
are you sure you own a sensation device?
because sensation devices corresponds to PYRAMID and yours says ACE instead of
also hboot version and radio are pretty weird for sensation device
anyway if you want to flash a rom from recovery unlock the bootloader again
that's preventing you to flash custom roms
Pasting said:
Hey, sorry I'm just not used to it being called ruu.exe. I can't even access the bootloader. Any other suggestions?
Click to expand...
Click to collapse
can you tell how you were trying to boot to the recovery(as you stated in your first post) if you can't even boot to the bootlaoder?
rzr86 said:
are you sure you own a sensation device?
because sensation devices corresponds to PYRAMID and yours says ACE instead of
also hboot version and radio are pretty weird for sensation device:
Click to expand...
Click to collapse
Hmm, i dont know, right now im at work
I own only sgs 2 on android and sgs +,
But right now i have only iphone
What diference is pyramid << codname for sensation htc??
Ace is ?? For model?
My friend say that these is sensation htc and i go here to de-brick phone, but i also read these radio numbers and hboot 2,0... I see diference, so i ask here for help.
Tnx for now, and if you can provide some links how i can flash to orginal stock rom, only to get phone in a life.
dadoremix said:
Hmm, i dont know, right now im at work
I own only sgs 2 on android and sgs +,
But right now i have only iphone
What diference is pyramid << codname for sensation htc??
Ace is ?? For model?
My friend say that these is sensation htc and i go here to de-brick phone, but i also read these radio numbers and hboot 2,0... I see diference, so i ask here for help.
Tnx for now, and if you can provide some links how i can flash to orginal stock rom, only to get phone in a life.
Click to expand...
Click to collapse
exactly is the codename for sensation devices
ace is a different htc device but i don't know which one
can you do this pls
in cmd from pc(connect the device in fastboot mode)type
fastboot getvar all
post the output of the command
Hey rzr86,
Thanks for the assistance. As I mentioned in the first post I can't enter recovery it was just popping the screen up then resetting.
I also mentioned that after about 10 restarts the HTC boot screen came up. So, following on from that I simply kept the volume down button pressed for the 10 cycles and the bootloader eventually came up. From there, RUU has successfully updated my device and it's working again.
Thanks again!!
dadoremix,
Good luck fixing your phone. Maybe next time don't hijack someone else's thread though eh?
Youtube or google for a fix its not fully bricked yet.
Sent from my SPH-L720 using xda app-developers app
Pasting said:
Hey rzr86,
Thanks for the assistance. As I mentioned in the first post I can't enter recovery it was just popping the screen up then resetting.
I also mentioned that after about 10 restarts the HTC boot screen came up. So, following on from that I simply kept the volume down button pressed for the 10 cycles and the bootloader eventually came up. From there, RUU has successfully updated my device and it's working again.
Thanks again!!
Click to expand...
Click to collapse
glad for you mate:good:
rzr86 said:
exactly is the codename for sensation devices
ace is a different htc device but i don't know which one
can you do this pls
in cmd from pc(connect the device in fastboot mode)type
fastboot getvar all
post the output of the command
Click to expand...
Click to collapse
INFOversion: 0.5
INFOversion-bootloader: 2.00.0029
INFOversion-baseband: 26.14.04.28_M
INFOversion-cpld: None
INFOversion-microp: 0438
INFOversion-main: 3.13.0.0
INFOserialno: SH0CHRX01121
INFOimei: imei*****removed
INFOproduct: ace
INFOplatform: HBOOT-7230
INFOmodelid: PD9810000
INFOcidnum: HTC__032
INFObattery-status: good
INFObattery-voltage: 3899mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: fcef1579
INFOhbootpreupdate: 11
INFOgencheckpt: 0
INFOregion-id: 0
all: Done!
finished. total time: 0.006s
i google-it .. itd some od DESIRE model.. and not a sensation
---------- Post added at 04:24 AM ---------- Previous post was at 03:43 AM ----------
deam i download
RUU_Ace_Sense30_S_HTC_WWE_3.12.405.1_Radio_12.65.60.29_26.14.04.28_M_release_225512_signed
dont work
error 140, bootloader version error .. hmm.
right now i come from work, time to bed, maybe after sleep, it will work:fingers-crossed:
dadoremix said:
INFOversion: 0.5
INFOversion-bootloader: 2.00.0029
INFOversion-baseband: 26.14.04.28_M
INFOversion-cpld: None
INFOversion-microp: 0438
INFOversion-main: 3.13.0.0
INFOserialno: SH0CHRX01121
INFOimei: imei*****removed
INFOproduct: ace
INFOplatform: HBOOT-7230
INFOmodelid: PD9810000
INFOcidnum: HTC__032
INFObattery-status: good
INFObattery-voltage: 3899mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: fcef1579
INFOhbootpreupdate: 11
INFOgencheckpt: 0
INFOregion-id: 0
all: Done!
finished. total time: 0.006s
i google-it .. itd some od DESIRE model.. and not a sensation
---------- Post added at 04:24 AM ---------- Previous post was at 03:43 AM ----------
deam i download
RUU_Ace_Sense30_S_HTC_WWE_3.12.405.1_Radio_12.65.60.29_26.14.04.28_M_release_225512_signed
dont work
error 140, bootloader version error .. hmm.
right now i come from work, time to bed, maybe after sleep, it will work:fingers-crossed:
Click to expand...
Click to collapse
surely it is not a sensation device because the model ID is different(starts with PD)
sensation devices's model ID starts with PG
about the error you can't use a ruu.exe with lower firmware version than yours while you are on S-ON
but it is better to continue this in desire forums as here is only for sensation devices
I have a HTC One S T Mobile which i had rooted and tried to install a Cyanogenmod 11 nightly build on and now i am
stuck in the HTC Inspire loop! I researched and found that i could install back to the stock OS using the RUU but i keep getting the error140 Wrong bootloader
I Have enclosed a pic of info from my phone also the RUU i tried was
RUU_Ville_U_TMOUS_1.53.531.16_Radio_0.16.31501S.02_10.18.31501S.08L_release_262073_signed
Other info is
c:\FB>fastboot getvar all
INFOversion: 0.5
INFOversion-bootloader: 2.15.0000
INFOversion-baseband: 1.13.50.05.31
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 3.14.531.17
INFOversion-misc: PVT SHIP S-ON
INFOserialno: HT24WW418779
INFOimei: 359902042697882
INFOproduct: vle
INFOplatform: HBOOT-8960
INFOmodelid: PJ4011000
INFOcidnum: T-MOB010
INFObattery-status: good
INFObattery-voltage: 4101mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: dirty-64bedd38
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
finished. total time: 0.067s
Please Please Help if at all possible
rp05 said:
I have a HTC One S T Mobile which i had rooted and tried to install a Cyanogenmod 11 nightly build on and now i am
stuck in the HTC Inspire loop! I researched and found that i could install back to the stock OS using the RUU but i keep getting the error140 Wrong bootloader
I Have enclosed a pic of info from my phone also the RUU i tried was
RUU_Ville_U_TMOUS_1.53.531.16_Radio_0.16.31501S.02_10.18.31501S.08L_release_262073_signed
Other info is
c:\FB>fastboot getvar all
INFOversion: 0.5
INFOversion-bootloader: 2.15.0000
INFOversion-baseband: 1.13.50.05.31
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 3.14.531.17
INFOversion-misc: PVT SHIP S-ON
INFOserialno: HT24WW418779
INFOimei: 359902042697882
INFOproduct: vle
INFOplatform: HBOOT-8960
INFOmodelid: PJ4011000
INFOcidnum: T-MOB010
INFObattery-status: good
INFObattery-voltage: 4101mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: dirty-64bedd38
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
finished. total time: 0.067s
Please Please Help if at all possible
Click to expand...
Click to collapse
You are actually S-ON, that means you can only flash a RUU of same version as installed or a newer one + you need an RUU specific to your CID. I'm gonna try finding a fitting RUU.
LS.xD said:
You are actually S-ON, that means you can only flash a RUU of same version as installed or a newer one + you need an RUU specific to your CID. I'm gonna try finding a fitting RUU.
Click to expand...
Click to collapse
I think you can use the one linked in this thread.
http://forum.xda-developers.com/showthread.php?t=2640420&page=2
I'm pretty sure I had the same ROM etc...
post #15.
808phone said:
I think you can use the one linked in this thread.
http://forum.xda-developers.com/showthread.php?t=2640420&page=2
I'm pretty sure I had the same ROM etc...
post #15.
Click to expand...
Click to collapse
Looking pretty good: --> http://d-innovations.org/RUU_Ville_U_JB_45_S_TMOUS_3.14.531.11_Radio_1.13.50.05.31_10.30.50.08L_release_309489_signed_ICS_2.exe.7z
Damn guys thanks very much for the quick reply will try now
rp05 said:
Damn guys thanks very much for the quick reply will try now
Click to expand...
Click to collapse
If you're phone is back alive you should think about gaining S-OFF.It simply makes life a bit easier
--> S-OFF <-- You're lucky, you're RUU is compatible with Moonshine S-OFF
Keep getting the Update Utility has stopped working error now when it is rebooting bootloader please see the enclosed picture
rp05 said:
Keep getting the Update Utility has stopped working error now when it is rebooting bootloader please see the enclosed picture
Click to expand...
Click to collapse
What update do you try to perform? Is it RUU_Ville_U_JB_45_S_TMOUS_3.14.531.11_Radio_1.13.50.05.31_10.30.50.08L_release_309489_signed_ICS_2.exe? WRONG
Here i found the original link --> THIS ONE WILL WORK FOR YOU
Sry for our mistake
yeah thats the one ! unzipped before i installed
Hello, I have similar issue with my phone. Everytime phone starts automatically in fastboot mode, recovery is not available. What can I do to fix my HTC One S (S4)? I was trying to fix my phone, using RUU, so i download RUU_Ville_U_JB_45_S_HTC_Europe_3.16.401.8_Radio_1.11.50.05.28_10.27.50.08L_release_301814_signed_2_4 for my phone with cid HTC__032. Was it good RUU?
When I go to fastboot mode, and type command in cmd, it always gives "device not found" or "signature verify fail" and I can't do anything.
Can somebody help me please?
rp05 said:
yeah thats the one ! unzipped before i installed
Click to expand...
Click to collapse
When finished updated
http://moonshine.io/
or
http://rumrunner.us/
to gain S-OFF
Sjegar71 said:
Hello, I have similar issue with my phone. Everytime phone starts automatically in fastboot mode, recovery is not available. What can I do to fix my HTC One S (S4)? I was trying to fix my phone, using RUU, so i download RUU_Ville_U_JB_45_S_HTC_Europe_3.16.401.8_Radio_1.11.50.05.28_10.27.50.08L_release_301814_signed_2_4 for my phone with cid HTC__032. Was it good RUU?
When I go to fastboot mode, and type command in cmd, it always gives "device not found" or "signature verify fail" and I can't do anything.
Can somebody help me please?
Click to expand...
Click to collapse
what happens when you select "bootloader" ?
Which Firmware u had installed before?
You should read this guide pls --> RUU guide
have you tried unlock BL again?
You're online Sjegar71 ??
Please download this toolkit --> http://forum.xda-developers.com/devdb/project/dl/?id=2688
and check if you still have the unlock_code.bin stored on your computer. (You used this earlier to unlock the bootloader)
also download the ville stock recovery
LS.xD said:
You're online Sjegar71 ??
Please download this toolkit --> http://forum.xda-developers.com/devdb/project/dl/?id=2688
and check if you still have the unlock_code.bin stored on your computer. (You used this earlier to unlock the bootloader)
also download the ville stock recovery
Click to expand...
Click to collapse
I have downloaded this toolkit. Yes I have unlock_code.bin on my computer. I don't know, did you see my video presenting phone's booting process: https://www.youtube.com/watch?v=nVRJZKwnGNU. Stock recovery downloaded
lets go to your own topic!!! http://forum.xda-developers.com/showthread.php?p=51236488
Boys was away the weekend and couldnt get on ! Just wanted to thank you for the help it worked flawlessly Will try to set it to S-OFF now !
rp05 said:
Boys was away the weekend and couldnt get on ! Just wanted to thank you for the help it worked flawlessly Will try to set it to S-OFF now !
Click to expand...
Click to collapse
Which S-off method will u use?
sorry jus did ! am going to try the moonshine one i think ! you have any recomended roms you think i should use once im done ?
rp05 said:
sorry jus did ! am going to try the moonshine one i think ! you have any recomended roms you think i should use once im done ?
Click to expand...
Click to collapse
Make sure you have moonshine FITTING to your firmware...
As far as i know you already use TwistedKat 2.4 --> For me it matches my needs best. But feel free to try different roms You already to the knowledge to change the roms
LS.xD said:
Make sure you have moonshine FITTING to your firmware...
As far as i know you already use TwistedKat 2.4 --> For me it matches my needs best. But feel free to try different roms You already to the knowledge to change the roms
Click to expand...
Click to collapse
with moonshine I keep getting ADB error
and am getting problem with SuperSU Binary update failed with the rooting steps