Database Info

Fastboot flash system.img - Possible with unrooted S-ON Stock Sensation?

*********
Hi,
down there you find the original thread/question but i think the only possibility to keep the data on a Sensation with not working touchscreen may be to flash a system.img from a RUU and hope it boots.
Is it possible to flash system.img via fastboot with a locked S-ON Sensation?
Thanks
Regards
Daniel
*********
Hello,
my GF owns a unrooted S-ON completely stock Sensation and did the official german t-mobile update (sorry we did not write the number down).
After the update the phone boots but the touchscreen does not work. You can't enter the pin code and also the volume buttons does not work. Only the power button works "a little bit". You can turn on / off screen but you can't open the shutdown menu.
I can enter Bootloader but as it's locked i don't know what i can do there.
Is it possible to mount the file system to backup some data?
Or is there any other way to apply a official htc firmware WITHOUT DELETING ALL USER DATA?
Thank you very much
PS I should have rooted / s-offed it before, damn it... ;-)

Wrong thread, this should go in Q&A section
Sent from my HTC Sensation XE with Beats Audio Z715e using xda premium

Okay sorry - could someone move it please?

Anyone?
Sent from my Desire HD using XDA App

Okay another idea.
Is it possible to extract a german T-Mobile RUU and just flash the system.img via fastboot? Do i have a chance to make it work again this way?
Or is it not possible to flash system.img when the phone is stock?

hey... i got the same problem.. tried a few things but still no working sensation :/

What did you try?
I think running a T Mobile RUU should work (but the user data is beeing deleted)
Sent from my Desire HD using XDA App

no, there is till now no matching tmob ruu :/

So is it only possible to run a RUU with the exactly same version as on the phone?

please help me
Dacoco said:
*********
Hi,
down there you find the original thread/question but i think the only possibility to keep the data on a Sensation with not working touchscreen may be to flash a system.img from a RUU and hope it boots.
Is it possible to flash system.img via fastboot with a locked S-ON Sensation?
Thanks
Regards
Daniel
*********
Hello,
my GF owns a unrooted S-ON completely stock Sensation and did the official german t-mobile update (sorry we did not write the number down).
After the update the phone boots but the touchscreen does not work. You can't enter the pin code and also the volume buttons does not work. Only the power button works "a little bit". You can turn on / off screen but you can't open the shutdown menu.
I can enter Bootloader but as it's locked i don't know what i can do there.
Is it possible to mount the file system to backup some data?
Or is there any other way to apply a official htc firmware WITHOUT DELETING ALL USER DATA?
Thank you very much
PS I should have rooted / s-offed it before, damn it...
Click to expand...
Click to collapse
My device doesn't start, only I can see is HTC logo in start, I flashed a new Rom but it didn't work, some peoples said that my device ruu is currupt, can anyone please give link to system.img?

Ahmedsiar24 said:
My device doesn't start, only I can see is HTC logo in start, I flashed a new Rom but it didn't work, some peoples said that my device ruu is currupt, can anyone please give link to system.img?
Click to expand...
Click to collapse
Please start a new thread, is the htc logo in black with four "!" signs at the edges of the screen? please give us more information about the phone(s-off?). also there are lots of RUUs in this link, you can just try them or manually pull the files you want from them.

m.m.m said:
Please start a new thread, is the htc logo in black with four "!" signs at the edges of the screen? please give us more information about the phone(s-off?). also there are lots of RUUs in this link, you can just try them or manually pull the files you want from them.
Click to expand...
Click to collapse
Thanks but I couldn't found system.img
And my device is pyramid s-off

Ahmedsiar24 said:
Thanks but I couldn't found system.img
And my device is pyramid s-off
Click to expand...
Click to collapse
Type fastboot getvar all
Post everything except imei and serial number

all info
rzr86 said:
Type fastboot getvar all
Post everything except imei and serial number
Click to expand...
Click to collapse
INFOversion: 0.5
INFOversion-bootloader: 1.27.0000
INFOversion-baseband: 11.23.3504.07_M2
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 3.32.61.51
INFOserialno: SH17MV803118
INFOimei: 358313041667499
INFOproduct: pyramid
INFOplatform: HBOOT-8260
INFOmodelid: PG5813000
INFOcidnum: ORANG001
INFObattery-status: good
INFObattery-voltage: 3854mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: 617f0a98
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!

Ahmedsiar24 said:
INFOversion: 0.5
INFOversion-bootloader: 1.27.0000
INFOversion-baseband: 11.23.3504.07_M2
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 3.32.61.51
INFOserialno: SH17MV803118
INFOimei: 358313041667499
INFOproduct: pyramid
INFOplatform: HBOOT-8260
INFOmodelid: PG5813000
INFOcidnum: ORANG001
INFObattery-status: good
INFObattery-voltage: 3854mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: 617f0a98
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
Click to expand...
Click to collapse
your device is on S-ON not S-OFF
you can use a ruu.exe for your region but unfortunately there is no ics for your device
and with S-ON you can't downgrade
maybe with a goldcard you can by pass it but i am not sure
by the way is your bootloader locked or unlocked?

info
rzr86 said:
your device is on S-ON not S-OFF
you can use a ruu.exe for your region but unfortunately there is no ics for your device
and with S-ON you can't downgrade
maybe with a goldcard you can by pass it but i am not sure
by the way is your bootloader locked or unlocked?
Click to expand...
Click to collapse
It's unlocked

Ahmedsiar24 said:
It's unlocked
Click to expand...
Click to collapse
flash 4ext recovery
take it from here
http://d-h.st/rG7
extract the recovery.img and flash it via fastboot command
the command is fastboot flash recovery recovery.img
then from for 4ext:
format all partitions except sdcard
enable smartflash(because you are on S-ON)
flash a custom rom
done
note: enable smartflash exactly before flashing the rom

[Q] HELP!! HTC Sensation XE flash kernel by mistake!

Hello
I have HTC sensation XE
CID: HTC__001
MID: PG5813001
Software:4.0.3
It's was unlocked but still S-ON. And I clicked flash kernel in (HTC all in one kit) by mistake which it has number (Stock 2.6.39.4).
Then the device rebooted and freeze on the green HTC logo. I still can go to the recovery window lock and unlock the bootloader. But I tried one RUU which gave me many errors first 155 then 131 or slimier.
I tried to change the CID in the ROM file then rename it and flash it but still fails.
I am trying (RUU_PYRAMID_LE_ICS_35_S_HTC_ARA_3.32.415.115_Radio_11.69A.3504.00U_11.23.3504.07_M2_release_257539_signed)
Is there any solution or I lost the device?
Please help
thank you all,

HTCGULF said:
Hello
I have HTC sensation XE
CID: HTC__001
MID: PG5813001
Software:4.0.3
It's was unlocked but still S-ON. And I clicked flash kernel in (HTC all in one kit) by mistake which it has number (Stock 2.6.39.4).
Then the device rebooted and freeze on the green HTC logo. I still can go to the recovery window lock and unlock the bootloader. But I tried one RUU which gave me many errors first 155 then 131 or slimier.
I tried to change the CID in the ROM file then rename it and flash it but still fails.
I am trying (RUU_PYRAMID_LE_ICS_35_S_HTC_ARA_3.32.415.115_Radio_11.69A.3504.00U_11.23.3504.07_M2_release_257539_signed)
Is there any solution or I lost the device?
Please help
thank you all,
Click to expand...
Click to collapse
follow this guide
http://forum.xda-developers.com/showthread.php?t=1631861
it might help you

Thank you,
I'm trying but still can't complete every step. I can't do S off because I can not start the phone and go to the debugging mode.
I can only access the recovery mode (4EXT) and the fastboot!!

HTCGULF said:
Thank you,
I'm trying but still can't complete every step. I can't do S off because I can not start the phone and go to the debugging mode.
I can only access the recovery mode (4EXT) and the fastboot!!
Click to expand...
Click to collapse
if you have unlocked bootloader there is no need to S-OFF
continue from the step4B,find the stock ics for XE and flash it via recovery(don't forget to enable smartflash)

INFOversion: 0.5
INFOversion-bootloader: 1.29.00
INFOversion-baseband: N/A
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 3.33.401.106
INFOproduct: pyramid
INFOplatform: HBOOT-8260
INFOmodelid: PG5813001
INFOcidnum: HTC__001
INFObattery-status: good
INFObattery-voltage: 3819mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: 705f86
INFOhbootpreupdate: 11
INFOgencheckpt: 0
I'm downloading now (Android Revolution HD 6.7.2 XE with Beats Audio)
Is it the right stock?
Thank you for your help

HTCGULF said:
INFOversion: 0.5
INFOversion-bootloader: 1.29.00
INFOversion-baseband: N/A
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 3.33.401.106
INFOproduct: pyramid
INFOplatform: HBOOT-8260
INFOmodelid: PG5813001
INFOcidnum: HTC__001
INFObattery-status: good
INFObattery-voltage: 3819mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: 705f86
INFOhbootpreupdate: 11
INFOgencheckpt: 0
I'm downloading now (Android Revolution HD 6.7.2 XE with Beats Audio)
Is it the right stock?
Thank you for your help
Click to expand...
Click to collapse
no it is not actually the stock but you can flash it too
for stock xe(if you want)download from here
http://forum.xda-developers.com/showthread.php?t=1529941
but be careful.for xe download the one in the second post
and always remember before flashing the rom enable smartflash first
best wishes

Thank rzr86 I really appreciate your help.
I'm downloading the right stock now.
By the way, I did flash the one I already downloaded it. It was done ok, gave me some options which I didn't know what should I choose. But finally when I restart the device it's still on the green logo.

I flashed the right stock you gave me. After finishing the reboot freeze on the green logo?!
Any tip?

HTCGULF said:
I flashed the right stock you gave me. After finishing the reboot freeze on the green logo?!
Any tip?
Click to expand...
Click to collapse
hmm, before flashing the rom i assume you enabled smartflash
if yes then try again to flash the boot.img manually
one question: did you supewipe before installing the rom?

Yes I enabled smartflash before superswipe and before the stock flashing.

HTCGULF said:
Yes I enabled smartflash before superswipe and before the stock flashing.
Click to expand...
Click to collapse
ok then flash the boot.img manually.if you don't remember how see here(extra 1)
http://forum.xda-developers.com/showthread.php?t=1631861
if that fails too then i can think only one solution.flashing a ruu.exe again but not the one that you mentioned in your first post because i noticed firmwares are not matching.i'll show which one
just try first the boot.img

Yes it worked this time.
But unfortunetly the wifi isn't working and show error text in the setting. Any idea?

HTCGULF said:
Yes it worked this time.
But unfortunetly the wifi isn't working and show error text in the setting. Any idea?
Click to expand...
Click to collapse
really happy for you man.:good:
now about wifi: it is supposed to work because you flashed the boot.img(it has to do with ramdisk and kernel)
the only thing that i can tell you is to flash it again
if it still shows error try to use wifix manager

I'm happy too thank you so much.
I tried to reflash boot.img, wifi didn't work.
And I tried wifi manager, didn't fix it either.
Please help :fingers-crossed:

i have only 2 options
1: to flash the whole rom again(maybe bad flash) or
2: to flash a ruu.exe and start from the beginning
for the 1 don't forget to superwipe and smartflash enable and
for the 2 see here http://forum.xda-developers.com/showthread.php?t=1672425 and locate this one
RUU_PYRAMID_LE_ICS_35_S_HTC_Europe_3.33.401.106_Ra dio_11.76A.3504.00U_11.24A.3504.31_M_release_26617 2_signed.exe
edit: as you can see it has your current firmware not the one that you tried in first place
best wishes

rzr86 said:
i have only 2 options
1: to flash the whole rom again(maybe bad flash) or
2: to flash a ruu.exe and start from the beginning
for the 1 don't forget to superwipe and smartflash enable and
for the 2 see here http://forum.xda-developers.com/showthread.php?t=1672425 and locate this one
RUU_PYRAMID_LE_ICS_35_S_HTC_Europe_3.33.401.106_Ra dio_11.76A.3504.00U_11.24A.3504.31_M_release_26617 2_signed.exe
edit: as you can see it has your current firmware not the one that you tried in first place
best wishes
Click to expand...
Click to collapse
I didn't find working link for RUU. I'll try to find one, and let you know.

HTCGULF said:
I didn't find working link for RUU. I'll try to find one, and let you know.
Click to expand...
Click to collapse
try this one
http://forum.xda-developers.com/showpost.php?p=28339479&postcount=1927

rzr86 said:
try this one
http://forum.xda-developers.com/showpost.php?p=28339479&postcount=1927
Click to expand...
Click to collapse
I did try it several times and it gives me wrong ip page. I think the link isn't right.

HTCGULF said:
I did try it several times and it gives me wrong ip page. I think the link isn't right.
Click to expand...
Click to collapse
actually i tested it and it started to download the exe

If wifi still not working after doing extra 1 step..
Then reflashing the rom from recovery without any wipe will help (just make sure you enable smartflash though)
Sent from my HTC Sensation 4G using xda premium

HTC one X AT&T soft bricked

hello guys im new to modding htc
my brother unlocked the bootloader of this phone and he tried to install a custom rom but he ended up in bricking the phone
current status is the phone only goes to boot logo and then restarts,
yes i can go to bootloader menu and yes the phone detects in my device manger as MY htc
what should i do to make the phone up and running
please help

Have you tried flashing the boot.IMG?
Did I help you? Hit THANKS!
Galaxy S3 (New love interest, stock)
Desire HD (Retired, REVOlution)
Galaxy Note 10.1 (Big Bad Wolf, stock)

GuyInTheCorner said:
Have you tried flashing the boot.IMG?
Did I help you? Hit THANKS!
Galaxy S3 (New love interest, stock)
Desire HD (Retired, REVOlution)
Galaxy Note 10.1 (Big Bad Wolf, stock)
Click to expand...
Click to collapse
thank you for the replay
no i didnt try
im new so not yet touched i know the basic
im good at samsung modding though
what should i do to flash a new boot.img ?

slytidar said:
thank you for the replay
no i didnt try
im new so not yet touched i know the basic
im good at samsung modding though
what should i do to flash a new boot.img ?
Click to expand...
Click to collapse
Open the zip of the Rom installed and copy boot.img to fastboot folder. Boot into bootloader and in command prompt type fastboot flash boot boot.img
Then clear caches and reboot
Sent from my HTC One XL using xda premium

fixed bt flashing a stock boot.img
thanks

31ken31 said:
Open the zip of the Rom installed and copy boot.img to fastboot folder. Boot into bootloader and in command prompt type fastboot flash boot boot.img
Then clear caches and reboot
Sent from my HTC One XL using xda premium
Click to expand...
Click to collapse
hi my phone dont pass the HTC logo and then turns off when i enter to recovery i get ***locked*** the PC dont recognize the phone, when i enter to FASTBOOT the PC shows that is conected but "USB DEVICE NOT RECOGNIZED" and in command promp shows "waiting device" any ideas why?? cant manage to install the stock rom PLEASE HELP

slytidar said:
fixed bt flashing a stock boot.img
thanks
Click to expand...
Click to collapse
The FAQ thread might be helpful for you in future:
http://forum.xda-developers.com/showthread.php?t=2136172
And my guide thread:
http://forum.xda-developers.com/showthread.php?t=2593382

Incorrect ROM
I was wondering if you could provide some guidance. I rooted and unlocked the bootloader on my HTC One X AT&T and tried to install a custom rom. I stupidly installed a rom that was not suitable for the AT&T version. My phone now cycles from the white HTC start screen to off. I can access the HBOOT and FASTBOOT. I tried to install an ruu and the installation wizard could not determine what image I have on it. It then gave a 159 error and said incorrect ruu. I took it from
http://www.htc.com/us/support/htc-one-x-att/news/
and is version 5.18.502.1.
Is it possible that I have deleted my ruu? Can my phone be fixed?
Heisenberg said:
The FAQ thread might be helpful for you in future:
http://forum.xda-developers.com/showthread.php?t=2136172
And my guide thread:
http://forum.xda-developers.com/showthread.php?t=2593382
Click to expand...
Click to collapse

AndyrewK said:
I was wondering if you could provide some guidance. I rooted and unlocked the bootloader on my HTC One X AT&T and tried to install a custom rom. I stupidly installed a rom that was not suitable for the AT&T version. My phone now cycles from the white HTC start screen to off. I can access the HBOOT and FASTBOOT. I tried to install an ruu and the installation wizard could not determine what image I have on it. It then gave a 159 error and said incorrect ruu. I took it from
http://www.htc.com/us/support/htc-one-x-att/news/
and is version 5.18.502.1.
Is it possible that I have deleted my ruu? Can my phone be fixed?
Click to expand...
Click to collapse
Just try flashing a ROM that's actually for this device using TWRP.
I'm not sure what you mean by deleted your RUU, the RUU is the program on your PC that flashes the stock ROM and firmware to your phone.

I took a ROM that has no requirements in the description, this one
http://forum.xda-developers.com/one-x-att/development/rom-t2964941
But when installing it required bootloader version 2.14 or up. It seems all other ROMs have a firmware requirement but my phones version main is blank.
My HBOOT info is
EVITA PVT SHIP S-ON RL
HBOOT-1.14.0002
RADIO-0.19AS.32.09.11_2
OpenDSP-v29.1.0.45.0622
eMMC-boot
Jun 11 2012, 14:36:28
and my getvar all returns
INFOversion: 0.5
INFOversion-bootloader: 1.14.0002
INFOversion-baseband: 0.19as.32.09.11_2
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main:
INFOversion-misc: PVT SHIP S-ON
INFOserialno: HT************
INFOimei: *******************
INFOproduct: evita
INFOplatform: HBOOT-8960
INFOmodelid: PJ8310000
INFOcidnum: 11111111
INFObattery-status: good
INFObattery-voltage: 4161mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: 1a7fdca3
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
Can I do anything to get this phone working again?
Heisenberg said:
Just try flashing a ROM that's actually for this device using TWRP.
I'm not sure what you mean by deleted your RUU, the RUU is the program on your PC that flashes the stock ROM and firmware to your phone.
Click to expand...
Click to collapse

AndyrewK said:
I took a ROM that has no requirements in the description, this one
http://forum.xda-developers.com/one-x-att/development/rom-t2964941
But when installing it required bootloader version 2.14 or up. It seems all other ROMs have a firmware requirement but my phones version main is blank.
My HBOOT info is
EVITA PVT SHIP S-ON RL
HBOOT-1.14.0002
RADIO-0.19AS.32.09.11_2
OpenDSP-v29.1.0.45.0622
eMMC-boot
Jun 11 2012, 14:36:28
and my getvar all returns
INFOversion: 0.5
INFOversion-bootloader: 1.14.0002
INFOversion-baseband: 0.19as.32.09.11_2
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main:
INFOversion-misc: PVT SHIP S-ON
INFOserialno: HT************
INFOimei: *******************
INFOproduct: evita
INFOplatform: HBOOT-8960
INFOmodelid: PJ8310000
INFOcidnum: 11111111
INFObattery-status: good
INFObattery-voltage: 4161mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: 1a7fdca3
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
Can I do anything to get this phone working again?
Click to expand...
Click to collapse
Try flashing this:
https://docs.google.com/file/d/0BxOSUQI9FeHVekhLY2h0Q1ozMEU/preview
Here's the thread it's from:
http://forum.xda-developers.com/showthread.php?t=2400766
You'll need to flash the boot.img from the ROM zip via fastboot after flashing the ROM. So once TWRP has flashed the ROM, use the reboot menu in TWRP to reboot directly to the bootloader, then use fastboot to flash the boot.img:
Code:
fastboot flash boot boot.img

Apologies, the MagioRom worked a treat.
Thank you for your help.
AndyrewK said:
I took a ROM that has no requirements in the description, this one
http://forum.xda-developers.com/one-x-att/development/rom-t2964941
But when installing it required bootloader version 2.14 or up. It seems all other ROMs have a firmware requirement but my phones version main is blank.
My HBOOT info is
EVITA PVT SHIP S-ON RL
HBOOT-1.14.0002
RADIO-0.19AS.32.09.11_2
OpenDSP-v29.1.0.45.0622
eMMC-boot
Jun 11 2012, 14:36:28
and my getvar all returns
INFOversion: 0.5
INFOversion-bootloader: 1.14.0002
INFOversion-baseband: 0.19as.32.09.11_2
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main:
INFOversion-misc: PVT SHIP S-ON
INFOserialno: HT************
INFOimei: *******************
INFOproduct: evita
INFOplatform: HBOOT-8960
INFOmodelid: PJ8310000
INFOcidnum: 11111111
INFObattery-status: good
INFObattery-voltage: 4161mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: 1a7fdca3
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
Can I do anything to get this phone working again?
Click to expand...
Click to collapse

AndyrewK said:
Apologies, the MagioRom worked a treat.
Thank you for your help.
Click to expand...
Click to collapse
Cool. You still have some work to do though, in order to run that ROM (or any other) you need to update your firmware, which requires s-off.

I noticed that,
I tried to make it S-OFF using the firewater, the http://forum.xda-developers.com/showthread.php?t=2155071 method and with Rumruner to no avail. I am root and have superCID, I will keep searching and try to figure out how to do it.
Heisenberg said:
Cool. You still have some work to do though, in order to run that ROM (or any other) you need to update your firmware, which requires s-off.
Click to expand...
Click to collapse

AndyrewK said:
I noticed that,
I tried to make it S-OFF using the firewater, the http://forum.xda-developers.com/showthread.php?t=2155071 method and with Rumruner to no avail. I am root and have superCID, I will keep searching and try to figure out how to do it.
Click to expand...
Click to collapse
There was a reason I linked you to the Kickdroid ROM earlier, flash that and then use Rumrunner to get s-off.

Thanks for that. I was actually wrong. The reason why Rumrunner wasn't working was because I was on a network that required a proxy. I ran the latest RUU to get the main-version back and then flashed the Magio ROM. In the few hours I used it I became accustomed to it.
Heisenberg said:
There was a reason I linked you to the Kickdroid ROM earlier, flash that and then use Rumrunner to get s-off.
Click to expand...
Click to collapse

[q] white screen with s-on help!!

I have an inspire 4g which is stuck on white screen with s-on... i have tried my possible best. downloaded ruu but ends in error 130... cant unlock bootloader... please help. anyone
here are my details
ACE PVT SHIP S-ON RL
HBOOT-2.00.0027
MICROP-0438
RADIO-26.14.04.28_M
eMMC-boot
sEP 7 2011,19:06:24
SOFTWARE: 3.13.661.4
CID: TELUS001

You need to update your bootloader to .29 to unlock it. What RUU are you trying to run?

bananagranola said:
You need to update your bootloader to .29 to unlock it. What RUU are you trying to run?
Click to expand...
Click to collapse
Please how do I update bootloader when am stuck. Is there something for me to flush...how do I flush when recovery isn't working for me. Am totally lost. Please help!
I used this RUU
RUU_Ace_Sence30_S_HTC_WWE_3.12.405.1_Radio_12.65.60.29.26.14.04.28_M_release_225512_signed.
Thanks for the reply friend. I appreciate it...

How did you phone end up in that state? You can only run a RUU that matches your phone's region. To run other RUUs, you need to make a goldcard. You run RUUs from fastboot, not recovery.

bananagranola said:
How did you phone end up in that state? You can only run a RUU that matches your phone's region. To run other RUUs, you need to make a goldcard. You run RUUs from fastboot, not recovery.
Click to expand...
Click to collapse
A friend tried flashing, it turned out bad...he got no idea how return the phone to it original state.
Yes I run the RUU from Fastboot but I keep on getting error 130. Wrong Rom.... How do I make a goldcard.? And what do I do with it next? Still on white screen

freexrythem said:
A friend tried flashing, it turned out bad...
Click to expand...
Click to collapse
Er...this isn't very specific. Try another RUU, one that matches your region.

bananagranola said:
Er...this isn't very specific. Try another RUU, one that matches your region.
Click to expand...
Click to collapse
Am currently in Ghana, Africa....I already tried 6 different RUU...all ending in error130. Could you kindly help me with the link to my specific type of RUU. And u did also mention about my bootloader having to be updated.... To unlock it.

freexrythem said:
Am currently in Ghana, Africa....I already tried 6 different RUU...all ending in error130. Could you kindly help me with the link to my specific type of RUU. And u did also mention about my bootloader having to be updated.... To unlock it.
Click to expand...
Click to collapse
The RUU comes with a bootloader. If you use the newest RUU your bootloader will update as well. I don't know all the RUUs, but there's an index thread in the development forums with a link to a bunch of RUUs. If you cant find a matching one make a goldcard. There's a thread for that in General, I think. And it should match the phone region, not your current region. So it depends where the phone came from.

bananagranola said:
The RUU comes with a bootloader. If you use the newest RUU your bootloader will update as well. I don't know all the RUUs, but there's an index thread in the development forums with a link to a bunch of RUUs. If you cant find a matching one make a goldcard. There's a thread for that in General, I think. And it should match the phone region, not your current region. So it depends where the phone came from.
Click to expand...
Click to collapse
The bunch of RUUs is where I got that one from. Being the latest but I still end up with error 130. Wrong Rom. I read about making a gold card but I don't thing having the state my phone is now will allow me to do so because I can't access Usb debugging etc. Is there a way to check which RUU is specific to my phone? Using my bootloader information above?

fastboot getvar all. Delete IMEI.

bananagranola said:
fastboot getvar all. Delete IMEI.
Click to expand...
Click to collapse
Am sorry but am a bit lost. Am a novice. Just got that much from few days of going through xda. Can u kindly tell me step by step procedure to do that...

freexrythem said:
Am sorry but am a bit lost. Am a novice. Just got that much from few days of going through xda. Can u kindly tell me step by step procedure to do that...
Click to expand...
Click to collapse
Put your phone in fastboot mode, hook it up to the computer, find fastboot in the SDK in your computer, open a command line prompt, type "fastboot getvar all", paste it here, and make sure to delete the IMEI line. Also, how did your phone get in that state?

bananagranola said:
Put your phone in fastboot mode, hook it up to the computer, find fastboot in the SDK in your computer, open a command line prompt, type "fastboot getvar all", paste it here, and make sure to delete the IMEI line. Also, how did your phone get in that state?
Click to expand...
Click to collapse
An friend accidentally tried to s-off which went wrong. Now I have a brick phone. Still s-on, can't unlock bootloader, can't run RUU because I can't find the right one, tried everything...still white screen.

freexrythem said:
An friend accidentally tried to s-off which went wrong. Now I have a brick phone. Still s-on, can't unlock bootloader, can't run RUU because I can't find the right one, tried everything...still white screen.
Click to expand...
Click to collapse
Wait, how long is it taking for your phone to get into bootloader? And which method did you use: the manual method, the retired AAHK, or the new AAHK2?

bananagranola said:
Wait, how long is it taking for your phone to get into bootloader? And which method did you use: the manual method, the retired AAHK, or the new AAHK2?
Click to expand...
Click to collapse
It doesn't take that long to get into bootloader. I thought of unlocking the bootloader before installing RUU which didn't work. I got an error on the step that involved token....I tried several time and still got that error. I read about that problem and thought its because of my Hboot version. U said ealier I needed to update my hboot.
I can't even turn on usb debugging or but the phone on charge default. If that was possible I could S-off and flash rom.
I can't use htcdev to unlock bootloader, I can't install RUU, I can't flash recovery because am S-on and am still stuck at white screen. I feel am losing this phone now...

1. You did not make or try to make a goldcard like I said.
2. You did not post the results of fastboot getvar all like I asked.
3. You cluttered up the forums with not one but two new threads instead of continuing in the one you already have.
Reported and giving up.

bananagranola said:
1. You did not make or try to make a goldcard like I said.
2. You did not post the results of fastboot getvar all like I asked.
3. You cluttered up the forums with not one but two new threads instead of continuing in the one you already have.
Reported and giving up.
Click to expand...
Click to collapse
I apologized for that. I realized it was a mistake to do that. I didn't know how to make a gold card. I tried a software which warrant that the phone be put on usb debugging.

INFOversion: 0.5
INFOversion-bootloader: 2.00.0027
INFOversion-baseband: 26.14.04.28_M
INFOversion-cpld: None
INFOversion-microp: 0438
INFOversion-main: 3.13.661.4
INFOserialno: SH19ETZ00038
INFOimei: *secret*
INFOproduct: ace
INFOplatform: HBOOT-7230
INFOmodelid: PD9814000
INFOcidnum: TELUS001
INFObattery-status: good
INFObattery-voltage: 3935mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: 743ca94a
INFOhbootpreupdate: 11
INFOgencheckpt: 0
INFOregion-id: 0
all: Done!
finished. total time: 0.031s
I don't know how to create a goldcard without a phone. All the other methods make use of the phone. But my phone is soft bricked.

freexrythem said:
INFOversion: 0.5
INFOversion-bootloader: 2.00.0027
INFOversion-baseband: 26.14.04.28_M
INFOversion-cpld: None
INFOversion-microp: 0438
INFOversion-main: 3.13.661.4
INFOserialno: SH19ETZ00038
INFOimei: *secret*
INFOproduct: ace
INFOplatform: HBOOT-7230
INFOmodelid: PD9814000
INFOcidnum: TELUS001
INFObattery-status: good
INFObattery-voltage: 3935mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: 743ca94a
INFOhbootpreupdate: 11
INFOgencheckpt: 0
INFOregion-id: 0
all: Done!
finished. total time: 0.031s
I don't know how to create a goldcard without a phone. All the other methods make use of the phone. But my phone is soft bricked.
Click to expand...
Click to collapse
You do need a working device to create a goldcard. BTW, how did you end like this?

glevitan said:
You do need a working device to create a goldcard. BTW, how did you end like this?
Click to expand...
Click to collapse
I got it in this state from a friend when he volunteered to S-off. Messed up the phone and he has no clue how to fix it.
Am S-on, can't install RUU...tried about 6 different RUUs always ending in Error 130 (wrong ID model). So am trying to create a gold card. But it seem as you said... I need a working phone. I got a working phone got the CID and Reverse CID but can't go paste it in the next step which involve opening up the website because the website seem to not to be working. Am left without how to obtain the IMG image to patch my card and use it to install the RUU rom.
What do I do from here?

htc__044

plz help me
i need the latest ruu for sensation xe htc__044
it's urgent
thanks in advance

foxthemene said:
plz help me
i need the latest ruu for sensation xe htc__044
it's urgent
thanks in advance
Click to expand...
Click to collapse
If I understand correctly htc__044 is Asia WWE, here is the RUU:
http://www.androidruu.com/getdownlo...0U_10.51.9007.27_M3_release_198358_signed.exe
(will download immediately)
For other RUUs:
http://www.androidruu.com/index.php?developer=Pyramid

foxthemene said:
plz help me
i need the latest ruu for sensation xe htc__044
it's urgent
thanks in advance
Click to expand...
Click to collapse
Hi,
Are you s-off?
Supercid?

i tried the ruu u mentioned but it didn't work
it gives me error
update from 3.33.707.151 to 1.35.707.1
i am s-on
and cid htc__044

foxthemene said:
i tried the ruu u mentioned but it didn't work
it gives me error
update from 3.33.707.151 to 1.35.707.1
i am s-on
and cid htc__044
Click to expand...
Click to collapse
Hi,
So, what version-main do you have?
If you are s-on ,it is much harder to match up the RUU,version-main, and cid.
They all have to match,or else the RUU will not work.
Can you do :
Code:
fastboot getvar version-main

malybru said:
Hi,
So, what version-main do you have?
If you are s-on ,it is much harder to match up the RUU,version-main, and cid.
They all have to match,or else the RUU will not work.
Can you do :
Code:
fastboot getvar version-main
Click to expand...
Click to collapse
Hi, I have the exact same problem with foxthemene. And I also have tried the given RUU 1.35.707.xxx. And it doesn't work, it keep giving 155 ERROR UNKOWN.
So here it is my getvar all
version: 0.5
version-bootloader: 1.27.0000
version-baseband: 11.24A.3504.31_M
version-cpld: None
version-microp: None
version-main:
serialno:
imei:
product: pyramid
platform: HBOOT-8260
modelid: PG5813000
cidnum: HTC__044
battery-status: good
battery-voltage: 4047mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: 617f0a98
hbootpreupdate: 11
gencheckpt: 0
Click to expand...
Click to collapse
I notice the version-main is no longer there. It shows up the first time I run the RUU, but after it failed, the version-main is gone.
So right now I'm confused, where exactly is the RUU for my CID? I upgraded this device using OTA, is that why there is no apparent RUU for my CID. How about factory images (the one they used for brand new Sensation), surely HTC have RUU for the base factory images, no?

aaulia said:
Hi, I have the exact same problem with foxthemene. And I also have tried the given RUU 1.35.707.xxx. And it doesn't work, it keep giving 155 ERROR UNKOWN.
So here it is my getvar all
I notice the version-main is no longer there. It shows up the first time I run the RUU, but after it failed, the version-main is gone.
So right now I'm confused, where exactly is the RUU for my CID? I upgraded this device using OTA, is that why there is no apparent RUU for my CID. How about factory images (the one they used for brand new Sensation), surely HTC have RUU for the base factory images, no?
Click to expand...
Click to collapse
Hi,
Firstly ,please remove your serial number and imei number.
You have a ICS/JB firmware, so a 1.35 RUU which is meant for GB , will not work.
I am not sure why your version main would disappear.
What happens when you boot up your phone?
Do you still have the update?Can you run it?
Is you phone a Sensation, or the XE version?

malybru said:
Hi,
Is you phone a Sensation, or the XE version?
Click to expand...
Click to collapse
depending from the MID i think it is the normal sensation

malybru said:
Hi,
Firstly ,please remove your serial number and imei number.
You have a ICS/JB firmware, so a 1.35 RUU which is meant for GB , will not work.
I am not sure why your version main would disappear.
What happens when you boot up your phone?
Do you still have the update?Can you run it?
Is you phone a Sensation, or the XE version?
Click to expand...
Click to collapse
Hi yes my device is normal Sensation, honestly I don't know why my version-main would disappear. But at least after digging deeper for a while I finally manage to flash CM 9.1.0 into my device, so at least it's now usable.
====
Woops, thanks, I removed them, sorry I kind of in a panic, didn't realize I just copy-pasted all of it
====
So this is the whole story, and what I know... hope this would help...
EDIT: I have HBOOT 1.27 (UNLOCKED) and S-ON
First, It started out with 4.0.3 (ICS) device that came from OTA (this was previously my wife's and I didn't touch it with custom rom, etc), when I received it. So the first think I do is do HTCDev unlock, it went smoothly, I installed TWRP (my favourite, but it seems I make a mistake here), it installed SuperSU, and I got root.
After that, I want to try custom ROM because I really dislike how slugish Sense is (I tried to like it, disable bunch of apps, but coming from Nexus, it's just doesn't feel right). So with my previous phones, I always have the original factory image(s) for fallback just incase I screw up . So after searching for a while, the only one RUU that I found that most likely work with my device is the 1.35.707 RUU (I didn't realize it was for GB).
Feeling safe after I got it, I went ahead and flash Albinoman's CM 10.2 using TWRP, and it stuck in a bootloop spectacularly . At this point everything is still normal, in terms of version-main, etc. So I think what the hell, let's flash RUU. So I tried it, put the device in fastboot, relocked, fireup RUU, at first it works, detect all the version, then it failed with 155 UNKNOWN ERROR after "updating signature" step, every single time (I tried couple of times). The version-main started missing after the first flash, the 2nd flash there is no
version: x.xxx.xxx to version x.xx.xx
Click to expand...
Click to collapse
just
From version: <blank> to version x.xx.xx
Click to expand...
Click to collapse
Now I remember in the past, updating my sister in-law's Rhyme, this also happen, but somehow, it succeeded in updating the device anyway. So I didn't think too much of it.
So, after hitting the wall for a while, I looked up why people love 4ext so much for HTC devices, turn out there is this SmartFlash thing and how flashing boot.img is tricky. Well I switch to 4ext 1.0.0.5 and flash CM 9.1.0 (just want to be safe, so I didn't flash Albinoman again). And what do you know, it works .
So that is my story so far. I just want to know is there any ICS RUU to fallback to stock for my Device or do I have to SuperCID to get it from other Device. or Maybe I have to downgrade firmware, install GB RUU and then update through OTA (or maybe I have to search for the OTA also).

in order to downgrade you have to S-OFF and supercid
then you can use the gb RUU which also downgrades firmware and hboot version
after that just do the official update
about OTA it could be a possibility to use it but you must have stock recovery
edit:i just saw your edit.you are already in ics firmware

HELP ME
I NEED SHIP ROM HTC ONE MINI DIRTRIST ASIS
INFORMATION:
INFOversion: 0.5
INFOversion-bootloader: 2.22.0000
INFOversion-baseband: 1.24.40e.00.26
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 3.10.707.3
INFOversion-misc: PVT SHIP S-ON
INFOserialno: HT428WA01630
INFOimei: 355865057500040
INFOmeid:
INFOproduct: m4_u
INFOplatform: HBOOT-8930
INFOmodelid: PO5810000
INFOcidnum: HTC__044
INFObattery-status: good
INFObattery-voltage: 4313mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: dirty-09ff2ded
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!

hhmobile said:
HELP ME
I NEED SHIP ROM HTC ONE MINI DIRTRIST ASIS
INFORMATION:
INFOversion: 0.5
INFOversion-bootloader: 2.22.0000
INFOversion-baseband: 1.24.40e.00.26
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 3.10.707.3
INFOversion-misc: PVT SHIP S-ON
INFOmeid:
INFOproduct: m4_u
INFOplatform: HBOOT-8930
INFOmodelid: PO5810000
INFOcidnum: HTC__044
INFObattery-status: good
INFObattery-voltage: 4313mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: dirty-09ff2ded
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
Click to expand...
Click to collapse
Hi,
You should edit your post and remove :
INFOserialno:
INFOimei: