Can anyone help me out with my tablet? It doesnt get detected on my laptop running windows 7 anymore. When i plug it into my laptop the battery logo on my tablet has a mark X on it. I want to flash a custom rom but i cant do it if my usb doesnt detect this tablet. It is running on 4.1.2
I tried installing kies so the drivers get installed and when that didnt work i tried uninstalling kies and installing the drivers by itself but it still didnt work. Can anyone help me out here please? I'll be forever grateful!
Related
Im coming from a mac so i picked up an older PC running windows xp so i could download Odin and flash my phone since its pretty much useless right now. I can install the drivers and the computer recognizes my phone but when i plug it in it says new hardware Samsung android USB Modem.
so i try to install it and it always gets stuck trying to install C:\windows\system32\drivers
it tells me that it might not function properly because it wasnt installed correctly.
I dont know what else to do
Smallsmx3 said:
Im coming from a mac so i picked up an older PC running windows xp so i could download Odin and flash my phone since its pretty much useless right now. I can install the drivers and the computer recognizes my phone but when i plug it in it says new hardware Samsung android USB Modem.
so i try to install it and it always gets stuck trying to install C:\windows\system32\drivers
it tells me that it might not function properly because it wasnt installed correctly.
I dont know what else to do
Click to expand...
Click to collapse
Where did you get the drivers (they should ahve been downloaded right from the samsung site)? Also what USB mode to you have your Phone in? I beleive for direct connection it has to be in Mass Storage mode. I didnt have any issues when I installed Kies onto my XP Machine and the phone was recognized right away.
Hello, i want help please, anyone can you tell me how to get odin to detect my phone coz it is not detecting the ohne and i m stuck in d middle of installing ics on my phone.
Restart everything
Restart you phone into d/w mode (if your hardware buttons are working ), restart you computer. Now it should detect.
And while you're in the process of flashing, make sure you the cable doesn't get disconnected.
This happened with me too, I just deleted odin & again extracted it from the rom folder(In every kyrillos rom package you can find odin)...
Just delete the old odin & get a new one, it will work...
Sent from my GT-I5800 using Tapatalk
suryarockzz said:
Hello, i want help please, anyone can you tell me how to get odin to detect my phone coz it is not detecting the ohne and i m stuck in d middle of installing ics on my phone.
Click to expand...
Click to collapse
Is this the first time you are using odin in your computer ? or your already detected before only now it is not detecting ?
because odin works fine in my computer , but wen i try it in my friend's computer
it did not detect
-> reinstall your phone drivers it might help
-> if i am correct Odin detect your phone only in download mode
Come out of odin and just plug your phone in to the comp, if the comp recognises it then you know your usb drivers are working fine on phone and comp, if not then thats your problem. reinstall drivers.
If it did recognise then the problem is with odin. Theres loads of versions out there that have pathway issues and other problems due to the way theyve been aquired or packaged. try typing "I5800_Odin_Multi_Downloader_v4.252.exe" its what i did and mine works everytime.
If i helped, hit thanks
Try with another USB port. It will probably work if you´d try, because I had a similar problem. PC simply didn't recognize my Samsung Galaxy 3, but when I plugged the phone in another USB port, the phone was recognized and so was Odin. But of course it wont go without appropriate drivers.
I had the same problem yesterday and switching USB-ports didn't help. It seemed I didn't have Kies installed so the USB-drivers were missing... After installing Kies everything went fine
hey, I had the same issue.. and what I did to resolve was : I downloaded USB drivers from the below link..installed and rebooted my system..and tried again..it finally got detected..I hope it helps..
link for drivers :
forum.xda-developers.com/showthread.php?t=728929
What worked for me was after installing the Samsung driver, I updated the driver from the Device Manager while the phone was plugged in and in download mode.Odin found the phone after that.
Battery percentage
Make sure your Battery Percentage is More than 50 %
Check your USB cable is in Working Condition .....
-fgfgdf
Hello all I've looked through these forms and goggled and I can't seem to find any answers so I hope someone here can help me. I have the 3113 Tab 2. I rooted it with CM9 9.1.0 build. I wanted to return the tab to stock but when I use the usb cable my pc doesn't see it. It will charge but never shows at a mass storage or anything. I have reinstalled Win 7 and loaded Samsung Keis drivers from Samsung website and still no luck. I have to different Usb cables and I have used them both on my desktop and laptop and the pc never recognizes the tablet. So I cannot use Odin to return my tab to stock. Not sure what else to try so if anyone has a solution to this please let me know. I'm going to order a new usb cable just encase that is the problem but other than that I don't know. Please if someone can point me in a direction that would really help. Thanks in advance.
I had a similar issue just installing the "drivers " as a stand alone thing on my Win7 x64, But when I re-installed the full PC Kies software package things worked just fine for me. Now anytime I flash a new ROM, Windows update searches and installs what I need automagically.
Hope that works for you ?
Having a similar issue. I rooted but haven't installed CM as yet. My laptop knows that something is plugged in and my tab knows that it's been plugged in. For some reason the disk drives (SDcard and extSDcard) don't show up and autoplay never happens. I left the Kies drivers on upon uninstalling it and that didn't help. Yesterday Windows Update downloaded a Samsung updated that worked up until I shut down my laptop. Pretty weird stuff.
When I plug in my p3113 into the computer while in download mode, it tries to install driver software, it does, then tells me the device was not successfully installed, I have Samsung USB drivers installed from kies, I've tried different usb ports to no avail.
I've been rooting phones since the G1, I've been through this process several times with several Samsung devices and have never had this problem, so is my computer just old or what?
I am running a fresh install of W7 Ultimate service pack 1. Don't come at me with searching either because I have and haven't found a solution.
Would like to get this done so my kids can continue downloading games, don't really wanna have to use someone elses computer but that is what it is gonna have to come down to unless someone here knows the answer to my problem.
Seems you know what you are doing. Only thing I can think of....did you turn USB debugging on? I believe it needs to be on for Odin.
Also do you have the proper drivers? If you install Kies and plug in your phone, your comp will download the needed drivers for your device, perhaps this may help
I usually keep flashing ROMS.
This time in sheer confidence I didnt charge the battery full.
I was switching from mokee 4.4 to CM11.
I wiped everything for a fresh install and unfortunately CM11 didnt install.
The tab restarted and now it wont go into recovery. what just happened?
It is just showing logo and I cannot get into Odin more either.
The tab had about 30% battery when it shut off and I cannot reach a charger for it for the next 4 hours.
Can I switch it off in any way to save battery?
the phone has switched off now. Is service center the only alternative? the tab was rooted with mokee installed.
devarshi84 said:
the phone has switched off now. Is service center the only alternative? the tab was rooted with mokee installed.
Click to expand...
Click to collapse
Try charging it when you have time and then try re flashing the stock Rom before taking it to service center
will the tab 2 charge without a recovery or ROM in place?
devarshi84 said:
will the tab 2 charge without a recovery or ROM in place?
Click to expand...
Click to collapse
I think it should
Ok, the tab2 is charging. thank you
I installed all the necessary drivers and odin and recovery on my laptop.
The tab2 is giving error on pc (this device wont start) mtp uSB. THe tab is stuck at 'samsung p3100' logo.
If it is any help, I have a working p3100 also running on stock firmware.
what should be my next step? I think I can manage if only I can get odin to recognize my phone or get into recovery (both of which seem to be missing.)
devarshi84 said:
Ok, the tab2 is charging. thank you
I installed all the necessary drivers and odin and recovery on my laptop.
The tab2 is giving error on pc (this device wont start) mtp uSB. THe tab is stuck at 'samsung p3100' logo.
If it is any help, I have a working p3100 also running on stock firmware.
what should be my next step? I think I can manage if only I can get odin to recognize my phone or get into recovery (both of which seem to be missing.)
Click to expand...
Click to collapse
Try reinstalling drivers
@shsagnik : Thank you very much for helping out.
I got installed all drivers by using the other P3100. But when I connect the bricked p3100, pc doesnt install MTP USB drivers. Under device manager it says " failed to start".
ODIN doesn't recognize it. either.
My mistake was I flashed everything on the phone including the internal memory.
PS: Can I force ODIN to recognize my phone?
Ok, my almost bricked device is back and runnning.
This might just help somebody. but my android handset was on a logo only mode. something in the combination of
Attaching it to pc (windows 7 64-bit)
re-installing and rejigging drivers
trying to let ODIN identiify
connecting via Samsung kies (I also tried restore on kies).
connecting a working android phone instead of the dead phone with pc to find and install drivers.
worked.
PS: I also let it sit dead powered off (worked only when charger was attached) for a whole day before trying to boot into recovery or bootlaoder (both worked).
devarshi84 said:
Ok, my almost bricked device is back and runnning.
This might just help somebody. but my android handset was on a logo only mode. something in the combination of
Attaching it to pc (windows 7 64-bit)
re-installing and rejigging drivers
trying to let ODIN identiify
connecting via Samsung kies (I also tried restore on kies).
connecting a working android phone instead of the dead phone with pc to find and install drivers.
worked.
PS: I also let it sit dead powered off (worked only when charger was attached) for a whole day before trying to boot into recovery or bootlaoder (both worked).
Click to expand...
Click to collapse
Awesome, now please change the title to solved