Hi everyone, I'm in a desperate searching of a way to clone the display of my tablet (galaxy note 8) in a window on the display of my laptop. I've already found an optimal product called MyMobiler. I've already installed and used it on my laptop windows 7, but now I've changed the laptop with one windows 8 and I don't understand why MyMobiler doesn't work yet The tablet android is the same, therefore I’m pretty sure that all properties on my tablet are ok. Actually When I try to connect with USB cable it doesn't work (unable to connect). Any suggestion how to solve the problem with MyMobiler or do you know any alternative way/application?
Thank you (and sorry for my english)
Related
hey XDAs
received my omnia 7 on last friday and it´s everything i could´ve asked for!
but now i got a little problem...
at first, some facts: i´m on a macbook pro and i use the windows phone 7 connector (tried win 7 and zune via boot camp, too).
i tried to unlock with 2 different trys, a) with chevron and b) with some dialer code to get in the "diagnosis" menu........both tries failed!
but after b) i got a new "diagnosis" tile in my apps menu
now i have the problem, that my pc can´t recognize the phone anymore...win 7 and zune say "no phone connected" and the wp7 connector (mac) doesn´t do anything (should start automatically, when phone is plugged in) but i get a "new network device found" message where i need to configure the new device.
(in addition, i THINK that my phone doesn´t even load the battery through the usb port, so maybe my cable is broken?)
maybe i can´t connect my phone because of the "diagnosis" menu?? and how can i remove this app??? maybe i should do a factory reset?
so what´s the problem here??? even if i can´t do the unlock, it sucks not being able to put music, videos or even updates on my omnia ;(
really nobody?
I don't know anything about using Macs with a WP7, but on windows, you need yo make sure you have the latest Zune. Also, if you have hacked to allow tethering, you have also turned off the Zune sync function.
Sent from my SGH-i917 using XDA Windows Phone 7 App
"so what´s the problem here??? even if i can´t do the unlock, it sucks not being able to put music, videos or even updates on my omnia ;("
The problem is you aren't actually running windows, it's still a virtual system. The USB controls are still through your mac. You will not be able to connect your win7 phone to a mac, that is not possible, and your wasting your time even attempting it. Sell the mac and buy a laptop, you will be happier.
slight22 said:
"so what´s the problem here??? even if i can´t do the unlock, it sucks not being able to put music, videos or even updates on my omnia ;("
The problem is you aren't actually running windows, it's still a virtual system. The USB controls are still through your mac. You will not be able to connect your win7 phone to a mac, that is not possible, and your wasting your time even attempting it. Sell the mac and buy a laptop, you will be happier.
Click to expand...
Click to collapse
If he's using VMWare fusion and accessing a Win7 guest via OSX host, then you're right.
However, if he's dual-booting Win7 through Boot Camp, then it should still work.
Samsung phones, like LG phones, have a way of switching the USB mode to allow Zune or allow tethering (the latter killed by Mango).
Monkeytown will have to follow the instructions for changing the USB mode back to the one that allows for Zune (on LG phones, it's called MS COMPOSITE).
i´m running a dual boot system, no vmware...
and microsoft released the wp7 connector themselves for mac, so it SHOULD work :/
i think i never saw an option of tethering in the settings menu, so how can i do that? i mean, change the usb mode
/e: i managed to get another omnia 7, and it works like a charm via my usb cable and mac connector
so....i would like to see the instructions that i should follow -.-
Hi,
Im new to windows mobile, i have titan 7, when i connect to computer via usb nothing comes up, didn't installed any drivers becuase i search the google for usb drivers for this but didn't get any so please help.
thx
Kami
Windows Mobile doesn't really exit anymore, first of all. You have Windows Phone 7 (no, not "Windows 7 Phone" like some people say, and yes, the branding is stupid). Despite the similar name it's a very different product from WinMo, although a bit of the low-level code is shared.
Your PC *should* have automatically installed the WP7 driver when you connected the phone, but all it would have done in that case is tell you to then install the Zune software, which is used for syncing with the phone. You can get Zune at http://zune.net, and it should include the needed drivers.
Note that some things, like USB Mass Storage access to the phone's filesystem, just aren't normally possible with WP7.
Hello everyone, I thought that if anyone tried to connect his tablet to his PC and use the tablet as wacom tablet(Photoshop PC you can view it on tablet) ,, if anyone tried it how did you do this?? if not, anyone got idea how to do that?
A Linux developer http ://rfc2822.github. io/GfxTablet/ , made this app works only on linux PCs with wifi networking, but my pc don't have wifi so if anyone knows how to use it on Linux but with USB CABLE tell me please, but I prefer to solve this issue on my windows platform...
sorry if this forum isn't the right one to post this.
YusufMH said:
Hello everyone, I thought that if anyone tried to connect his tablet to his PC and use the tablet as wacom tablet(Photoshop PC you can view it on tablet) ,, if anyone tried it how did you do this?? if not, anyone got idea how to do that?
A Linux developer http ://rfc2822.github. io/GfxTablet/ , made this app works only on linux PCs with wifi networking, but my pc don't have wifi so if anyone knows how to use it on Linux but with USB CABLE tell me please, but I prefer to solve this issue on my windows platform...
sorry if this forum isn't the right one to post this.
Click to expand...
Click to collapse
I've tried to do this with Splashtop and I have to say, it works quite well. No pressure sensitivity though. You should try it out.
First off, sorry if I put this in the wrong section, I did not see one for Windows tablets just windows phones. Well anyway I just got a generic Windows Tablet (This one:http://www.weiku.com/products/13079175/10_inch_tablet_pc.html) It came pre-loaded with Windows 7. Seeing as it's not an ideal OS for a tablet I opted for Windows 8.1. I created a boot USB and did my installation, only to find that the finished product has no audio or network card adapter drivers. So after a full night of scouring the internet I could not find the drivers I needed. So I guess what I'm asking is does anyone here know where to get the drivers or where to find any universal drivers? I've searched and searched. But to no avail. You guys are all I really have to turn to. So if you can help leave me a reply. Thanks everyone.
Hi all,
I'd be grateful for any advice you might have.
I did a clean installation of Windows 10 on my Prestigio tablet (PMP810TD3G) as the device had become a bit slower. Unfortunately, I didn't know that installing Windows on a tablet is not that easy as it is on a desktop PC. In fact, the installation itself went fine, but my tablet is a desktop PC now as all tablet features (touch screen, brightness, battery indicator etc.) are missing. I believe it must be a driver issue and that's why I'm here. Yes, I didn't backup my drivers before as I'd thought Windows would just find it itself.
I've tried everything - uninstalling uknown devices in device manager, automatic search for drivers, Windows update, looking for drivers all over the Internet, using 3rd party driver update apps, contacting Prestigio, contacting other service centres. None of those's helped. That's why I think the only possibility (as I was told that Prestigio company in fact no longer exists) for me is to find somebody who has the same tablet. Does anybody to happen to have the same (or similar - 32 GB, without 3G/Wi-Fi) device and could send me the drivers?
Any advice will be highly appreciated!
Many thanks,
cleedec