UPDATED POST -> http://goo.gl/C7l3i9
Micromax Unite 2 has limited OTG support. Whenever you connect a pen drive it shows a notification "Checking for errors". Its a software bug not a hardware problem. In order to connect a pen drive you can either install USB OTG Helper or flash any custom ROM. As most custom ROMs are full of bugs so it is advised to root Unite 2 and mount pen drive using USB OTG Helper.
You need:
1. USB OTG Helper (Download from play store)
2. X-Plore file manager or ES file explorer (Download from play store)
3. Rooted Micromax Unite 2
To mount OTG drive follow these steps:
Step 1:
Open USB OTG Helper and Grant root permission.
Step 2:
Tap MOUNT.
Step 3:
You will see an error "code 9".
Step 4:
Now open X-plore File Manager (or ES file explorer).
Step 5:
Open root folder ( / ).
Step 6:
Open storage folder.
Step 7:
Open UsbOtgDrives folder.
Step 8:
Open drive_1 folder.
Step 9:
Now you can see your pen drive contents here.
NOTE: If this method doesn't work in ES file explorer then uninstall ES file explorer and install again.
IMPORTANT: Unmount your pen drive before removing.
DONE.
My work:
[Repartition][Without pc] Increase apps storage in Micromax A106 Unite 2
CWM recovery for Micromax Unite 2 / Myphone Rio Lite
Recovery Flashable Stock ROM for Micromax A106 Unite 2
Hit Thanks :good: if i helped you..
Thanks a lot. I had already done 95% of the process, just didn't know the location where to find the drive. Thanks for pin-pointing the drive location.
check this post tomorrow.. new method will pe posted
Sent from my Micromax A106 using XDA mobile app
Related
Now Solved
How to Root & Install SU Binaries on Micromax Funbook P362?
after Searching for Months on Internet I have found the Solution given Below.
Check Out!
[SOLUTION]
Things you Need:
1. A Micromax Funbook Talk P362 (Tested) or Any Other Micromax Tab (Untested)
2. Data Cable
3. Window PC with Internet Connection (Required/Needed)
4. Patience :laugh:
Just Extract "Root Genius.rar" and Open "Root Genius.exe" on your Window PC and Follow instructions given by the Program, It will Root Completely of its own and Also install the Latest SU Binaries.
Download "Root Genius.rar" from Attachment
Don't give me Credits for the Program.It is for only Non-Profit/Non-Commercial Uses.:good:
Press THANKS if I Helped You
How to Root Canvas HD ?
hi here's a solution
Before you take a step further, please make sure that your device is Micromax Canvas HD A116.
You can check this at Settings >> About Device.
Take a backup of your existing ROM using the ROM Manager App available on Play Store.
You may also opt for a backup of your important data such as SMS, phone numbers using one of the backup apps available on play store for free.
The upgrade process work on internal battery power. So we would recommend you to charge your device more than 80%
.
Disable all anti-virus software installed on you device and PC.
If you have kies installed on your PC, just uninstall it.
Enable USB debugging on your Device. The option for this is available at :
Settings > Applications > Development > USB debugging or
Settings> Developer Option> USB Debugging
Now your Micromax Canvas HD A116 is ready for rooting.
Download the Rooting Tool. It is a zipped file, hence extract it on your computer.
Connect your Micromax Canvas HD A116 to PC using the original data-cable.
After connection is successful, ‘RunMe.bat‘ file which is available inside the zipped folder.
This should start rooting on command prompt.
Press ’1′ for using normal mode when it asks for mode. Press ‘Enter’ when required.
Now all you need is to follow on-screen steps which comes. These are really to follow.
The rooting will copy some binary files on your Micromax Canvas HD A116 and will restart your device sometime.
After the rooting is complete, search for an app with name ‘SuperUser SU’. If its there, your device is rooted successfully.
:fingers-crossed: Guys, here is the tutorial how to root your Canvas Doodle 2 A240 using MotoChopper Rooting Package.
1. Install the Micromax A240 ABD Drivers ( you can use PDA net which is easy or you can download the drivers from the attachment below)
2. Enable USB Debugging on your phone
3. Now connect your phone to your PC
4. Download the MT6589_Rooting_Package.zip file and extract it
5. You will find a “run.bat” file in the extracted folder, run it
6. Now press any key to start the rooting process
Congratulation your phone is now rooted :victory:
You must create a NVRAM backup before flashing custom ROMs. Flashing a wrong recovery can also give invalid IMEI error. If your phone doesn't connect to network or wifi then you have to restore the NVRAM backup.
You need:
1. MTKDroidTools
2. Rooted Android Phone
To create NVRAM backup follow these steps:
Step 1:
In your phone go to Settings -> Developer Options and select USB debugging. If there is no Developer Options in Settings then go to About phone and tap Build number 7 times to enable Developer Options.
Step 2:
Open MTKdroidTools and connect your phone via USB cable.
Step 3:
In MTKdroidTools click ROOT and grant root permission in phone.
Step 4:
Click IMEI/NVRAM.
Step 5:
Click Backup.
You can find your backup files in the MtkDroidTools\BackupNVRAM folder.
Done.
My work:
[Repartition][Without pc] Increase apps storage in Micromax A106 Unite 2
CWM recovery for Micromax Unite 2 / Myphone Rio Lite
Recovery Flashable Stock ROM for Micromax A106 Unite 2
Hit Thanks :good: if i helped you..
Please check -> Proper Root Unite 2 without PC
You need:
1. Drivers
2. SP Flash Tool
3. SuperSU.zip
3. Scatter file
4. Recovery
5. Micromax Unite 2
Make Backups before flashing:
1. Readback backup
2. NVRAM backup
To root your phone follow these steps:
Step 1:
Copy downloaded SuperSU.zip to External SD card.
Step 2:
Open SP Flash Tool and load the scatter file.
Step 3:
Click in the location column of RECOVERY and select the downloaded recovery file.
Step 4:
Switch off your phone and remove the battery.
Step 5:
Click Download in SP Flash Tool.
Step 6:
Insert battery and connect your phone via USB cable (Don't switch on).
Step 7:
After successful flashing of recovery press vol+, vol- and power on buttons to reboot to recovery.
NOTE:
In CTR recovery:
Swipe left to go backward
Swipe right to go forward
Step 8:
To Install SuperSU:
Tap Install zip
Tap Choose zip Sd card
Swipe right and select SuperSU file
Step 9:
Swipe left to go backward and select Reboot the Phone.
Tap Reboot the Phone
Done.
My work:
[Repartition][Without pc] Increase apps storage in Micromax A106 Unite 2
CWM recovery for Micromax Unite 2 / Myphone Rio Lite
Recovery Flashable Stock ROM for Micromax A106 Unite 2
Hit Thanks :good: if i helped you..