locked xperia j st26i - Sony Xperia Miro, Tipo (Dual), J, E

yesterday I left my phone to my litter broter's hand and i dont know why he put me a pattern code which i don't know it
I tried to boot in recovery mode(vol up + power) to reset it, but it boots normally, I tried to boot it in download mode (vol down + power) but it boots in normal mode too
I downloaded companion soft to reset it, but the soft doesnt let me to use it because it is pattern locked
I downloaded the flashtool and all drivers, installed them and followed all steps from here:
//oi59.tinypic.com/25tx569.jpg
and when i hit the flash button i get this error:
//oi57.tinypic.com/359fr5h.jpg
(i cant post links)
what can i do to restore my phone? i flashed and installed custom and stock roms on many samsung's but this xperia is over my powers

devilboost said:
yesterday I left my phone to my litter broter's hand and i dont know why he put me a pattern code which i don't know it
I tried to boot in recovery mode(vol up + power) to reset it, but it boots normally, I tried to boot it in download mode (vol down + power) but it boots in normal mode too
I downloaded companion soft to reset it, but the soft doesnt let me to use it because it is pattern locked
I downloaded the flashtool and all drivers, installed them and followed all steps from here:
//oi59.tinypic.com/25tx569.jpg
and when i hit the flash button i get this error:
//oi57.tinypic.com/359fr5h.jpg
(i cant post links)
what can i do to restore my phone? i flashed and installed custom and stock roms on many samsung's but this xperia is over my powers
Click to expand...
Click to collapse
Download latest .ftf for XJ, with Flashtool flash .ftf via flashmode (green led)

Related

[Q]Bootloader removed

Hi all xda users, i need some help here, i installed this (http://forum.xda-developers.com/showthread.php?t=1583430) rom from annson08 Stock Firmwares - bootloader removed - 100% SAFE TO FLASH, yep i know the reason was to avoid a hard brick for my pda ( G-Fit), so i want to know how do i install another rom if the bootloader its removed from this device, i can´t access to download mode, i can just get in recovery mode and Emergency D-load Arm9, so what can i do to get in download mode and flash it (another rom) through odin? or can i flash through recovery (install from zip feature?)
Thanks in advance!
bootloaders are not removed, you can still go to download mode, recovery mode, arm11 mode this is just your thinking
without bootloader your mobile can't even light up
dheeraj (dhlalit11) said:
bootloaders are not removed, you can still go to download mode, recovery mode, arm11 mode this is just your thinking
without bootloader your mobile can't even light up
Click to expand...
Click to collapse
Yep, thanks for the answer, so i need to know how do i get in download mode ( Vol down+ center key + pw on, vol up + pw on, vol up. down + pw on doesn't work) i only can get to recovery and emergency dload arm9
Thanks again!
volume down + power + home button should work, first try it
if it don't work then you will need adb
JosBa said:
Hi all xda users, i need some help here, i installed this (http://forum.xda-developers.com/showthread.php?t=1583430) rom from annson08 Stock Firmwares - bootloader removed - 100% SAFE TO FLASH, yep i know the reason was to avoid a hard brick for my pda ( G-Fit), so i want to know how do i install another rom if the bootloader its removed from this device, i can´t access to download mode, i can just get in recovery mode and Emergency D-load Arm9, so what can i do to get in download mode and flash it (another rom) through odin? or can i flash through recovery (install from zip feature?)
Thanks in advance!
Click to expand...
Click to collapse
Actually, I just removed the bootloader from the installer of stock roms so that the original bootloader from your gingerbread phone wouldn't be replaced, but that doesn't necessary means that the bootloader of your phone would also be removed.
annson08 said:
Actually, I just removed the bootloader from the installer of stock roms so that the original bootloader from your gingerbread phone wouldn't be replaced, but that doesn't necessary means that the bootloader of your phone would also be removed.
Click to expand...
Click to collapse
it is the time to change your op with this info to prevent further misunderstandings
Ty guys for your answers, now my phone doesn´t boot since last night, well it does but my screen is in blank :S, i´ll buy a usb jig :S

[Q] Bootloader Bricked

My phone is Sony Xperia M2 (Single Sim) D303
I'm on android 4.4.2 and booted Doomlord kernel which was for android 4.3 So my phone got stuck in a loop. After factory reset(hoping it would work ) i can't enter fastboot mode. hoping for advice on how to enter fastboot mode and on someone with Sony Xperia M2 kernel so i can restore boot the stock kernel. Or on some other advice to help me get my phone working again. Right now im getting "device unauthorized" and can't even enter adb commands.
Flash tool doesn't recognise phone. It'd be helpful if someone even knows how to shut down the phone.
I got CWM recovery. So no longer got CWM but can now get into fastboot. Still no ADB and im stuck on Sony image.
Please help me.Thanks in advance.
Have you tried what I suggested in this thread?
Crim Soukyuu said:
Have you tried what I suggested in this thread?
Click to expand...
Click to collapse
My phone is a black screen right now. Can't shut it down,reboot, use adb commands, fastboot or anything. I'm worried if the power reaches 0% it could not even start up again. I'll try it tough, but really looking for diffrent options right now. I would try and flash it but i need to turn phone on and off for flash. I currently can't even do that. Phone doesn't start in flash mode. Maybe i should give it to someone for repairs but it'd probably cost me well over 200$.
I also need some MTP (i think thats it) drivers... Kinda strange don't know what im doing but sometimes i got the drivers and sometimes i don't
flashtool has all drivers needed from what I know. If you want to access phone data, MTP is the protocol used, and that should work out of the box.
Also, to flash the ftf you can use flashmode, so even if fastboot doesn't work, maybe flashmode will.
How do you know the phone is on btw? The only thing I to fix it is to flash ftf in flashmode, but you could wait if someone else has another idea.
Crim Soukyuu said:
flashtool has all drivers needed from what I know. If you want to access phone data, MTP is the protocol used, and that should work out of the box.
Also, to flash the ftf you can use flashmode, so even if fastboot doesn't work, maybe flashmode will.
How do you know the phone is on btw? The only thing I to fix it is to flash ftf in flashmode, but you could wait if someone else has another idea.
Click to expand...
Click to collapse
The phone has a red light on and the screen is lighted black. I tried flashmode but i need to turn phone on and off for it to enter flashmode... I can't do that becouse buttons don't work for some reason. And i had all the drivers but since factory reset i lost them all (don't know how it works) well i got em all back without the MTP and can't install it with flashtool tried already. Also can't enter adb commands. It's like the phone is stuck on end of a loop. It's not looping the logo it's just stuck on the black screen after the logo and doesn't budge like an Iron Brick.
Answer
if you have kernel with CWM you can download flashable zip with rom and just copy zip to sdcard a then flash it in CWM.
korusas said:
My phone is Sony Xperia M2 (Single Sim) D303
I'm on android 4.4.2 and booted Doomlord kernel which was for android 4.3 So my phone got stuck in a loop. After factory reset(hoping it would work ) i can't enter fastboot mode. hoping for advice on how to enter fastboot mode and on someone with Sony Xperia M2 kernel so i can restore boot the stock kernel. Or on some other advice to help me get my phone working again. Right now im getting "device unauthorized" and can't even enter adb commands.
Flash tool doesn't recognise phone. It'd be helpful if someone even knows how to shut down the phone.
I got CWM recovery. So no longer got CWM but can now get into fastboot. Still no ADB and im stuck on Sony image.
Please help me.Thanks in advance.
Click to expand...
Click to collapse
Maybe you can try this,
1. Turn Power button and Vol Up, until first vibrate, keep hold it, and you will feel three times vibration. Now your device is off.
2. Open Flashtool, enter flash mode (push Vol Down and connect your device), reflash your ftf (if you are using DoomLord kernel that supposed to be 4.4.2 ftf), after flash is done, disconnect the cable and redo #1 (above).
3. Push Vol Up and connect your device to enter fastboot mode.
4. After that, go flash DoomLord Boot Kernel. When finished, disconnect your cable, but do not turn on your device yet.
5. Turn on and repeatedly push Vol Down to enter Recovery, go to install from sd card, and install SuperSU-Update.zip file (you must already have SuperSu-update.cip in your external sd)
6. After install supersu, you should go to advanced and choose power off instead of reboot it.
7. Do #2 again, but this time, when choosing the ftf, keep in mind that only kernel and loader to be flash (untick only for Cache, Data and Kernel). And do flash.
8. Turn on your device, and now your 4.4.2 is rooted.
darmank said:
Maybe you can try this,
1. Turn Power button and Vol Up, until first vibrate, keep hold it, and you will feel three times vibration. Now your device is off.
2. Open Flashtool, enter flash mode (push Vol Down and connect your device), reflash your ftf (if you are using DoomLord kernel that supposed to be 4.4.2 ftf), after flash is done, disconnect the cable and redo #1 (above).
3. Push Vol Up and connect your device to enter fastboot mode.
4. After that, go flash DoomLord Boot Kernel. When finished, disconnect your cable, but do not turn on your device yet.
5. Turn on and repeatedly push Vol Down to enter Recovery, go to install from sd card, and install SuperSU-Update.zip file (you must already have SuperSu-update.cip in your external sd)
6. After install supersu, you should go to advanced and choose power off instead of reboot it.
7. Do #2 again, but this time, when choosing the ftf, keep in mind that only kernel and loader to be flash (untick only for Cache, Data and Kernel). And do flash.
8. Turn on your device, and now your 4.4.2 is rooted.
Click to expand...
Click to collapse
does this work cause my xperia m2 dual is bricked after the logo it just turns blank

Restoring stock ROM

Apologies for dumb questions but I am really newbie with Sony phones (I know my way around HTCs though).
I have the Xperia Z3 Dual (D6633). After some reading, I've managed to unlock bootloader, installed TWRP recovery and rooted the phone.
My wife somehow locked the phone without memorizing password and the brightest idea I've had was to perform factory reset. Accidentally, I have managed to perform a full wipe, wiping everything except mSD card (I have experience with CWM recoveries but not with TWRP). I did not backup software before accidental wipe.
Phone obviously wont boot but I am having hard time to get to recovery as well, phone just hangs with TWRP recovery logo on the screen.
The first step I intend to perform is to try to re-flash recovery again a go from there.
My intention is to restore stock ROM using Flashtool and d6633_23.0.f.1.74_1288-7362_r8b_ru.ftf
I've read how to enter appropriate boot mode, however, I am not sure witch one to choose for Flashtool to work. BTW, is it possible to restore stock software using Sony PC Companion software?
Can anyone point me in a right direction? A simple guide to follow to in order to get out of this tough situation?
Download your desired firmware and install latest flash tool on your computer.
Copy the downloaded firmware on to the flash tool folder which can be found on your C drive.
Hold volume up and power together till your phone vibrates thrice (power shut down)
Now open flash tool, select flash mode and then your firmware. Now press start.. You will see animation there asking you to connect your device.
Hold your phone's "down volume button" and connect it to the computer. Flash tool will recognize the device and starts flashing. Wait for it to finish.
Boot your device and you are good to go!
creative70 said:
Download your desired firmware and install latest flash tool on your computer.
Copy the downloaded firmware on to the flash tool folder which can be found on your C drive.
Hold volume up and power together till your phone vibrates thrice (power shut down)
Now open flash tool, select flash mode and then your firmware. Now press start.. You will see animation there asking you to connect your device.
Hold your phone's "down volume button" and connect it to the computer. Flash tool will recognize the device and starts flashing. Wait for it to finish.
Boot your device and you are good to go!
Click to expand...
Click to collapse
Success! Thank you for your hand holding.
Order of steps to get the phone to flash mode was slightly different in my case though. When I pressed volume up and power key the device did not react. Repeating the same process with USB cable inserted worked. When pressing volume down the phone was tying to get to recovery but then it hanged there. In the end when Flashtool asked me to connect the phone, I've kept pressing volume down key with phone turned off and inserted USB cable and it got recognized and software got flashed in the end. BTW, Flashtool does't contain drivers for Z3 yet, therefore I've installed drivers for Z1 / Z2 in addition to flashmode and fastboot drivers.
Currently I am updating software trough Sony Update and then I will check if bootloader is still unlocked ant will try to get to recovery. If no luck I will reflash recovery.
Thank you again!
P.S. I've noticed that there are slightly different application included in this ROM. FTF file in these forums is a slightly different version that came with my phone originally. It might be useful to get more versions of FTFs for D6633 model uploaded...

bootloader disabled

Hi all, recently i've flashed Nitrogen rom with kernel, but i was flashed the wrong kernel. 2202, mine is 2203. The phone is rebooted but no screen just it's screen on. After reflash the right kernel, 2203, everything got to normal but my bootloader is missing. Can't access to him. I try everything, reboot mode in bootloader, vol - power. The phone boot but by pass the bootloader and goes directly to system. I tried resolving issue with Sony companion but an error when he told me to reboot with vol- power, it's booted directly to system after few second.
Someone can help me ? Please.
Thks
Try with Emma (Sony flashtool) insted of Sony companion or use Flashtool by androxyde (community flashtool) and flash .ftf file.
Thks i'll try it.
Doesnt work. The will boot directly to system.
Help please !
Do you use correct combo? Does volume keys work?
Yes the correct combo vol down and usb. Reboot via system to bootloader the same. The phone stay few second to screen off with Led orange and boot to system. But boot to team recovery works perfect, blue Led and i'm in....

Stuck at TWRP Loop!

My phone got stuck at TWRP Loop!!
So, there is what i did...
I flashed Samsung a7 firmware ANDROID 10 [download from firja] and it worked. I needed to root my phone and tried Magisk new app.
But, with new Firmware I did not had TWRP installed, so I flashed TWRP with oden as instructed in this POST [BTW, I followed first method , not the *****OREO ROOT INSTRUCTIONS:***** ].
** TWRP version is 3.2.3-1_ashyx **
After that my phone got stuck at TWRP Loop.
Phone will not boot to normal , only BOOTLOOP to TWRP. Most of the time TWRP doesn't load fully and TWRP screen seams Black Line [in horizontal axix, MY phone display fine, it seems come from The TWRP!! ].
So, I am kinda STUCK at this TWRP Loop and TWRP load at it LOGO nothing more.
I tried every possible KEY combination to get to the fastboot mode/download mode but failed.
One or TWO time I was able[or it did it self!] to boot into TWRP (TWRP loaded but , with BLACK line) , i tried to enter download mode but failed.
So, what can i do?
-Thanks
I got the same problem, i did this: Power + volume down next when it restarted fast pressed v+ and v- and plug in the cable before it showed samsung logo
farab1 said:
My phone got stuck at TWRP Loop!!
So, there is what i did...
I flashed Samsung a7 firmware ANDROID 10 [download from firja] and it worked. I needed to root my phone and tried Magisk new app.
But, with new Firmware I did not had TWRP installed, so I flashed TWRP with oden as instructed in this POST [BTW, I followed first method , not the *****OREO ROOT INSTRUCTIONS:***** ].
** TWRP version is 3.2.3-1_ashyx **
After that my phone got stuck at TWRP Loop.
Phone will not boot to normal , only BOOTLOOP to TWRP. Most of the time TWRP doesn't load fully and TWRP screen seams Black Line [in horizontal axix, MY phone display fine, it seems come from The TWRP!! ].
So, I am kinda STUCK at this TWRP Loop and TWRP load at it LOGO nothing more.
I tried every possible KEY combination to get to the fastboot mode/download mode but failed.
One or TWO time I was able[or it did it self!] to boot into TWRP (TWRP loaded but , with BLACK line) , i tried to enter download mode but failed.
So, what can i do?
-Thanks
Click to expand...
Click to collapse
Nothing to worry and don't panic,
I've been facing problem like this.
To enter bootloader / download mode. With USB Cable plugged You must press and hold Power + Vol Down button then count it for 7-8 seconds, after that immediately release Power button, and press Vol Up + Down. Repeat this step if fail. U will see Download mode.
Regards.
szymin22 said:
I got the same problem, i did this: Power + volume down next when it restarted fast pressed v+ and v- and plug in the cable before it showed samsung logo
Click to expand...
Click to collapse
Just need perfect count like 7-8 secs You will faced Download mode.
Regards.
farab1 said:
My phone got stuck at TWRP Loop!!
So, there is what i did...
I flashed Samsung a7 firmware ANDROID 10 [download from firja] and it worked. I needed to root my phone and tried Magisk new app.
But, with new Firmware I did not had TWRP installed, so I flashed TWRP with oden as instructed in this POST [BTW, I followed first method , not the *****OREO ROOT INSTRUCTIONS:***** ].
** TWRP version is 3.2.3-1_ashyx **
After that my phone got stuck at TWRP Loop.
Phone will not boot to normal , only BOOTLOOP to TWRP. Most of the time TWRP doesn't load fully and TWRP screen seams Black Line [in horizontal axix, MY phone display fine, it seems come from The TWRP!! ].
So, I am kinda STUCK at this TWRP Loop and TWRP load at it LOGO nothing more.
I tried every possible KEY combination to get to the fastboot mode/download mode but failed.
One or TWO time I was able[or it did it self!] to boot into TWRP (TWRP loaded but , with BLACK line) , i tried to enter download mode but failed.
So, what can i do?
-Thanks
Click to expand...
Click to collapse
You hold volume down + power button for 7 seconds and phone will be power off.
Then you press both volume buttons (vol up + vol down) and plug in cable what is connected to computer, this pusch you to download mode of phone.
farab1 said:
My phone got stuck at TWRP Loop!!
So, there is what i did...
I flashed Samsung a7 firmware ANDROID 10 [download from firja] and it worked. I needed to root my phone and tried Magisk new app.
But, with new Firmware I did not had TWRP installed, so I flashed TWRP with oden as instructed in this POST [BTW, I followed first method , not the *****OREO ROOT INSTRUCTIONS:***** ].
** TWRP version is 3.2.3-1_ashyx **
After that my phone got stuck at TWRP Loop.
Phone will not boot to normal , only BOOTLOOP to TWRP. Most of the time TWRP doesn't load fully and TWRP screen seams Black Line [in horizontal axix, MY phone display fine, it seems come from The TWRP!! ].
So, I am kinda STUCK at this TWRP Loop and TWRP load at it LOGO nothing more.
I tried every possible KEY combination to get to the fastboot mode/download mode but failed.
One or TWO time I was able[or it did it self!] to boot into TWRP (TWRP loaded but , with BLACK line) , i tried to enter download mode but failed.
So, what can i do?
-Thanks
Click to expand...
Click to collapse
It also happened to me two days ago. The solution is the replays there are many people sayid to you↑
But i cant install it to now if If you have successfully installed TWRP with no issues please contact me and sayd me i such you want it thank you for reply
play 5 said:
It also happened to me two days ago. The solution is the replays there are many people sayid to you↑
But i cant install it to now if If you have successfully installed TWRP with no issues please contact me and sayd me i such you want it thank you for reply
Click to expand...
Click to collapse
do yours Fastboot mode works ?
means command
right now I start a new project about recovery for SM-A750FN its new maybe we find right recovery for you.
fastboot devices
Click to expand...
Click to collapse
Krys89 said:
do yours Fastboot mode works ?
means command
right now I start a new project about recovery for SM-A750FN its new maybe we find right recovery for you.
Click to expand...
Click to collapse
If you mean Fastboot when I go to the official a750fn recovery there are a part his name install update from adb
If you mean it Im trayed only this command Fastboot reboot and after phone boted to OS
A think it mean its work right?
Or if fastboot the download mode yes it is work
Waiting your reply
Shutdown the device and then push (volume up + volume down) and put connected to computer usb cable to entrence download mode
use then command
fastboot devices
Click to expand...
Click to collapse
it must show the id of device
Krys89 said:
Shutdown the device and then push (volume up + volume down) and put connected to computer usb cable to entrence download mode
use then command
it must show the id of device
Click to expand...
Click to collapse
I used these command many time but in adb mode
exactly this is the thing I missing the Fastboot mode to...
Hi, Bennie from Holland here, with the same problem: tried to flash Twrp to the Samsung A750FN and now stuck in not working Twrp logo, flashing for 2 seconds and further a black screen< The fastboot using Odin can be used via the method described by szimin22, bur the adb fastboot gives no response. Does someone know the correct trwp version for this mobile or a firmware file that can be flashed by Odin?
A Week Later ...
i have installed on the a7 the firmware dated okt 2020 and i can install without any prob trwrp or PBRP! but the machine goes into bootloop again. The only thing which seems to be resolved is a normal functional recovery. Now the return to the phone itself and we are home! any suggestions, pls give us a chance to not smash the a7 through the kitchenwindow

Categories

Resources