My phone is Sony Xperia M2 (Single Sim) D303
I'm on android 4.4.2 and booted Doomlord kernel which was for android 4.3 So my phone got stuck in a loop. After factory reset(hoping it would work ) i can't enter fastboot mode. hoping for advice on how to enter fastboot mode and on someone with Sony Xperia M2 kernel so i can restore boot the stock kernel. Or on some other advice to help me get my phone working again. Right now im getting "device unauthorized" and can't even enter adb commands.
Flash tool doesn't recognise phone. It'd be helpful if someone even knows how to shut down the phone.
I got CWM recovery. So no longer got CWM but can now get into fastboot. Still no ADB and im stuck on Sony image.
Please help me.Thanks in advance.
Have you tried what I suggested in this thread?
Crim Soukyuu said:
Have you tried what I suggested in this thread?
Click to expand...
Click to collapse
My phone is a black screen right now. Can't shut it down,reboot, use adb commands, fastboot or anything. I'm worried if the power reaches 0% it could not even start up again. I'll try it tough, but really looking for diffrent options right now. I would try and flash it but i need to turn phone on and off for flash. I currently can't even do that. Phone doesn't start in flash mode. Maybe i should give it to someone for repairs but it'd probably cost me well over 200$.
I also need some MTP (i think thats it) drivers... Kinda strange don't know what im doing but sometimes i got the drivers and sometimes i don't
flashtool has all drivers needed from what I know. If you want to access phone data, MTP is the protocol used, and that should work out of the box.
Also, to flash the ftf you can use flashmode, so even if fastboot doesn't work, maybe flashmode will.
How do you know the phone is on btw? The only thing I to fix it is to flash ftf in flashmode, but you could wait if someone else has another idea.
Crim Soukyuu said:
flashtool has all drivers needed from what I know. If you want to access phone data, MTP is the protocol used, and that should work out of the box.
Also, to flash the ftf you can use flashmode, so even if fastboot doesn't work, maybe flashmode will.
How do you know the phone is on btw? The only thing I to fix it is to flash ftf in flashmode, but you could wait if someone else has another idea.
Click to expand...
Click to collapse
The phone has a red light on and the screen is lighted black. I tried flashmode but i need to turn phone on and off for it to enter flashmode... I can't do that becouse buttons don't work for some reason. And i had all the drivers but since factory reset i lost them all (don't know how it works) well i got em all back without the MTP and can't install it with flashtool tried already. Also can't enter adb commands. It's like the phone is stuck on end of a loop. It's not looping the logo it's just stuck on the black screen after the logo and doesn't budge like an Iron Brick.
Answer
if you have kernel with CWM you can download flashable zip with rom and just copy zip to sdcard a then flash it in CWM.
korusas said:
My phone is Sony Xperia M2 (Single Sim) D303
I'm on android 4.4.2 and booted Doomlord kernel which was for android 4.3 So my phone got stuck in a loop. After factory reset(hoping it would work ) i can't enter fastboot mode. hoping for advice on how to enter fastboot mode and on someone with Sony Xperia M2 kernel so i can restore boot the stock kernel. Or on some other advice to help me get my phone working again. Right now im getting "device unauthorized" and can't even enter adb commands.
Flash tool doesn't recognise phone. It'd be helpful if someone even knows how to shut down the phone.
I got CWM recovery. So no longer got CWM but can now get into fastboot. Still no ADB and im stuck on Sony image.
Please help me.Thanks in advance.
Click to expand...
Click to collapse
Maybe you can try this,
1. Turn Power button and Vol Up, until first vibrate, keep hold it, and you will feel three times vibration. Now your device is off.
2. Open Flashtool, enter flash mode (push Vol Down and connect your device), reflash your ftf (if you are using DoomLord kernel that supposed to be 4.4.2 ftf), after flash is done, disconnect the cable and redo #1 (above).
3. Push Vol Up and connect your device to enter fastboot mode.
4. After that, go flash DoomLord Boot Kernel. When finished, disconnect your cable, but do not turn on your device yet.
5. Turn on and repeatedly push Vol Down to enter Recovery, go to install from sd card, and install SuperSU-Update.zip file (you must already have SuperSu-update.cip in your external sd)
6. After install supersu, you should go to advanced and choose power off instead of reboot it.
7. Do #2 again, but this time, when choosing the ftf, keep in mind that only kernel and loader to be flash (untick only for Cache, Data and Kernel). And do flash.
8. Turn on your device, and now your 4.4.2 is rooted.
darmank said:
Maybe you can try this,
1. Turn Power button and Vol Up, until first vibrate, keep hold it, and you will feel three times vibration. Now your device is off.
2. Open Flashtool, enter flash mode (push Vol Down and connect your device), reflash your ftf (if you are using DoomLord kernel that supposed to be 4.4.2 ftf), after flash is done, disconnect the cable and redo #1 (above).
3. Push Vol Up and connect your device to enter fastboot mode.
4. After that, go flash DoomLord Boot Kernel. When finished, disconnect your cable, but do not turn on your device yet.
5. Turn on and repeatedly push Vol Down to enter Recovery, go to install from sd card, and install SuperSU-Update.zip file (you must already have SuperSu-update.cip in your external sd)
6. After install supersu, you should go to advanced and choose power off instead of reboot it.
7. Do #2 again, but this time, when choosing the ftf, keep in mind that only kernel and loader to be flash (untick only for Cache, Data and Kernel). And do flash.
8. Turn on your device, and now your 4.4.2 is rooted.
Click to expand...
Click to collapse
does this work cause my xperia m2 dual is bricked after the logo it just turns blank
Related
Hey All,
I know there are a lot threads like this on here, so I made sure I tried everything possible before asking for help.
First off, It is a MZ604 wifi version.
Ok, upon powering up my Xoom, it will get to the Motorola screen/ dual core and stall.
I am able to get into recovery, however the version I am running, 5.8.3.1 apparently does not allow sd card mounting, so I am unable to restore or flash a new rom.
A factory reset/ data wipe does nothing.
I have tried to flash a new rom via ADB, however my computer will not install the Xoom drivers. It will say "installing device drivers" for about 2 minutes or so before failing. I have tried using moto helper and the other Motorola usb drivers
I am unable to boot into android to enable usb debugging
I have tried all of the above on my laptop too and to the same result.
My question is, is this a brick? or can it be solved.
Thanks for your time
Yes it can be fixed, if you can access recovery then it means you can access fastboot. So what you do is once you're in the fastboot protocol, is flash in TWRP recovery http://forum.xda-developers.com/showthread.php?t=1782235
With that recovery you can mount SD cards, so use a computer to download the ROM you want then flash. Hopefully you get the idea, but I can post in more detail if you want.
Chaosgod27 said:
Yes it can be fixed, if you can access recovery then it means you can access fastboot. So what you do is once you're in the fastboot protocol, is flash in TWRP recovery http://forum.xda-developers.com/showthread.php?t=1782235
With that recovery you can mount SD cards, so use a computer to download the ROM you want then flash. Hopefully you get the idea, but I can post in more detail if you want.
Click to expand...
Click to collapse
Thanks for responding, I appreciate it. The thing is that my xoom cannot connect to my computer, and therefore and cannot use fastboot to send it the image correct?
I could fix all of this if I could just get the drivers to install, but because of my xoom's condition, the drivers cannot install no matter what.
Hmm usually fastboot drivers should automatically install. Does your recovery have an option to boot into fastboot? Once you're in fastboot it should automatically install the drivers, and in the android sdk folder in CMD (assuming you're running windows) put in this command: fastboot devices
It should show up your XOOM if not install this http://www.motorola.com/Support/AU-EN/Support-Homepage/Software-and-Drivers/USB-PC-Charging-Drivers
And try again
Hi all!
I got the same problem...
I can connect it to PC and do fastboot, I've flashed it many times, but it didn't affect my Xoom, i've reflashed the recovery to a lower version (tiamat rc4) but the recovery still shows version 5.8.3.1...
I even tried RSD, but it still the same...
no errors, and no effects...
is my Xoom bricked?
^I heard of this before, sounds like your new recovery image just gets overwritten by the current recovery. Though I thought it was only for stock recovery.
but, how can I overwrite it? it seems like they are read only...
It's all about timing, to access recovery once you see the Moto logo wait 2-3 seconds then vol + then vol + again. This is right after you flashed in your new recovery.
You can also access your fastboot like that as well, instead of pressing vol + again, press vol - then vol +.
Chaosgod27 said:
It's all about timing, to access recovery once you see the Moto logo wait 2-3 seconds then vol + then vol + again. This is right after you flashed in your new recovery.
You can also access your fastboot like that as well, instead of pressing vol + again, press vol - then vol +.
Click to expand...
Click to collapse
that's not the problem... of course I can access the recovery, fastboot and RSD, the problem is that I whatever I do to the xoom just don't work... and it reports no error at all... it's just succeed, but nothing happened... It's like a PC running windows with DeepFreeze installed...
Anyone got the same problem? can anybody help me?:crying:
No you're missing the whole point, after you flashed your new recovery it may get overwritten if you don't reboot into recovery straight way. It never happened to me but I have read that people has that issue.
Apologies for dumb questions but I am really newbie with Sony phones (I know my way around HTCs though).
I have the Xperia Z3 Dual (D6633). After some reading, I've managed to unlock bootloader, installed TWRP recovery and rooted the phone.
My wife somehow locked the phone without memorizing password and the brightest idea I've had was to perform factory reset. Accidentally, I have managed to perform a full wipe, wiping everything except mSD card (I have experience with CWM recoveries but not with TWRP). I did not backup software before accidental wipe.
Phone obviously wont boot but I am having hard time to get to recovery as well, phone just hangs with TWRP recovery logo on the screen.
The first step I intend to perform is to try to re-flash recovery again a go from there.
My intention is to restore stock ROM using Flashtool and d6633_23.0.f.1.74_1288-7362_r8b_ru.ftf
I've read how to enter appropriate boot mode, however, I am not sure witch one to choose for Flashtool to work. BTW, is it possible to restore stock software using Sony PC Companion software?
Can anyone point me in a right direction? A simple guide to follow to in order to get out of this tough situation?
Download your desired firmware and install latest flash tool on your computer.
Copy the downloaded firmware on to the flash tool folder which can be found on your C drive.
Hold volume up and power together till your phone vibrates thrice (power shut down)
Now open flash tool, select flash mode and then your firmware. Now press start.. You will see animation there asking you to connect your device.
Hold your phone's "down volume button" and connect it to the computer. Flash tool will recognize the device and starts flashing. Wait for it to finish.
Boot your device and you are good to go!
creative70 said:
Download your desired firmware and install latest flash tool on your computer.
Copy the downloaded firmware on to the flash tool folder which can be found on your C drive.
Hold volume up and power together till your phone vibrates thrice (power shut down)
Now open flash tool, select flash mode and then your firmware. Now press start.. You will see animation there asking you to connect your device.
Hold your phone's "down volume button" and connect it to the computer. Flash tool will recognize the device and starts flashing. Wait for it to finish.
Boot your device and you are good to go!
Click to expand...
Click to collapse
Success! Thank you for your hand holding.
Order of steps to get the phone to flash mode was slightly different in my case though. When I pressed volume up and power key the device did not react. Repeating the same process with USB cable inserted worked. When pressing volume down the phone was tying to get to recovery but then it hanged there. In the end when Flashtool asked me to connect the phone, I've kept pressing volume down key with phone turned off and inserted USB cable and it got recognized and software got flashed in the end. BTW, Flashtool does't contain drivers for Z3 yet, therefore I've installed drivers for Z1 / Z2 in addition to flashmode and fastboot drivers.
Currently I am updating software trough Sony Update and then I will check if bootloader is still unlocked ant will try to get to recovery. If no luck I will reflash recovery.
Thank you again!
P.S. I've noticed that there are slightly different application included in this ROM. FTF file in these forums is a slightly different version that came with my phone originally. It might be useful to get more versions of FTFs for D6633 model uploaded...
i rooted my xperia L times ago. now I wanna install cyanogenmod. i can't load the recovery menu with vol- and power button, so used quikboot 4.1. And now there isn't any option to update from internal or external storage. it just recommend to update via ADM, and I've trobble using the ADM.
my PC first recognized the ADM through usb, but now it dos'nt recognize it. like no thing is connected in bootloader mode. and I dont have any SDK or ADM program running in my win7.
I dont know were to download it!!!! I just found a crashed link in xda!
pleeeeeeease help me. I realy need the cm, my xperia is not in good mood:crying:
PL.biologist said:
i rooted my xperia L times ago. now I wanna install cyanogenmod. i can't load the recovery menu with vol- and power button, so used quikboot 4.1. And now there isn't any option to update from internal or external storage. it just recommend to update via ADM, and I've trobble using the ADM.
my PC first recognized the ADM through usb, but now it dos'nt recognize it. like no thing is connected in bootloader mode. and I dont have any SDK or ADM program running in my win7.
I dont know were to download it!!!! I just found a crashed link in xda!
pleeeeeeease help me. I realy need the cm, my xperia is not in good mood:crying:
Click to expand...
Click to collapse
The recovery you're booting to is not a custom recovery ,anyway I'll giude to installing I'll give some useful links.
First if all you need to unlock your bootloader go here
http://forum.xda-developers.com/xperia-l/general/xperia-l-how-to-flash-tool-unlocking-t2337955
You may run in a bootloop (the phone stuck at bootanimation)
Just flash the stock ftf via flashtool .
Now go here and take the first method , it will guide how to install CM12
http://forum.xda-developers.com/showpost.php?p=63769485&postcount=2
Remember that the first may take sometime so don't pullout the batterybattery.
Good luck:highfive:
n78 shadow said:
The recovery you're booting to is not a custom recovery ,anyway I'll giude to installing I'll give some useful links.
First if all you need to unlock your bootloader go here
http://forum.xda-developers.com/xperia-l/general/xperia-l-how-to-flash-tool-unlocking-t2337955
You may run in a bootloop (the phone stuck at bootanimation)
Just flash the stock ftf via flashtool .
Now go here and take the first method , it will guide how to install CM12
http://forum.xda-developers.com/showpost.php?p=63769485&postcount=2
Remember that the first may take sometime so don't pullout the batterybattery.
Good luck:highfive:
Click to expand...
Click to collapse
thank for solutions. but before your reply, I used the recovery installer. it bring a good recovery menu in my xperia L. finally i updated to cm12.1, after successful update, it goes to reboot. but it did'nt turn on! unfortunately, no signal from my xperia L. it goes to fastboot mode and flash mode. but flashtool dont flash the phone using fastmode and boot.img from cm12.1 files!
what should i do, with this off phone, red led blinking!
PL.biologist said:
thank for solutions. but before your reply, I used the recovery installer. it bring a good recovery menu in my xperia L. finally i updated to cm12.1, after successful update, it goes to reboot. but it did'nt turn on! unfortunately, no signal from my xperia L. it goes to fastboot mode and flash mode. but flashtool dont flash the phone using fastmode and boot.img from cm12.1 files!
what should i do, with this off phone, red led blinking!
Click to expand...
Click to collapse
Are you sure that your bootloader is unlocked?
Anyway try to flash the stock ftf ,download the suitable one here
http://forum.xda-developers.com/xperia-l/general/sony-xperia-l-flashable-ftfs-locked-t2560642
Hey guys!
So, i was trying to install CM13 unofficial version, and wiped the system and internal storage using TWRP recovery. I was supposed to install the rom from a zip file i had placed in the external memory card. What i did, was, i rebooted the phone by mistake, after wiping it from the recovery without installing the ROM and now the phone is caught in a bootloop. I know i am an idiot to do that. I tried removing the battery and reboot it in recovery mode using the key combination with no luck. It just starts the boot loop. I tried using fastboot and adb from pc to push files into the internal memory, but my device is not getting detected on the adb anymore (maybe the usb debugging is disabled now?).
What i guess is stopping TWRP recovery from showing up is the lack of twrp/themes folder in the internal memory since i wiped it. But there might be some other cause that i am unaware of. What do i do now? Any help will be greatly appreciated!
Hey! I'm having the same problem with my yu yureka.. Can anyone help me please!
Kaustubh M said:
Hey guys!
So, i was trying to install CM13 unofficial version, and wiped the system and internal storage using TWRP recovery. I was supposed to install the rom from a zip file i had placed in the external memory card. What i did, was, i rebooted the phone by mistake, after wiping it from the recovery without installing the ROM and now the phone is caught in a bootloop. I know i am an idiot to do that. I tried removing the battery and reboot it in recovery mode using the key combination with no luck. It just starts the boot loop. I tried using fastboot and adb from pc to push files into the internal memory, but my device is not getting detected on the adb anymore (maybe the usb debugging is disabled now?).
What i guess is stopping TWRP recovery from showing up is the lack of twrp/themes folder in the internal memory since i wiped it. But there might be some other cause that i am unaware of. What do i do now? Any help will be greatly appreciated!
Click to expand...
Click to collapse
Hi! I'm having the same problem with this post... Does anyone knows the solution of this problem. I'd be really glad if anyone could help me with this..please!
Hey are you able to boot into fastboot mode? If you can....
Prerequisites –
1. Make sure that you have 70-80% battery on your phone.
2. You need a PC and a USB cable to connect your phone to the PC.
3. Flashing the factory firmware will wipe all the data present in the internal memory. So, make a backup of that if you can.
4.Install all the necessary Device drivers.
DOWNLOADS -
1. Download the flash tools from here . http://www.mediafire.com/download/87gfz7mdch188an/Flashtools_For_Yu_Yureka.zip
2. Download the factory firmware from Here (cm 12.1) . http://builds.cyngn.com/factory/tomato/cm-12.1-YOG4PAS3JM-tomato-signed-fastboot.zip
Steps To Flash Factory Firmware –
1. Extract the flashtools zip in a new folder on the desktop.
2. Extract the factory firmware zip in the same folder and make sure that all of the flashtools files are also present.
3. Now, power off your phone. If you are stuck in a bootloop, then pull out the battery and reinsert it. (Do not switch on the phone.)
4. While pressing the Volume Up key, connect your phone to the PC with the help of a USB cable.
5. You should now see the fastboot logo on your device. If you did, leave the Volume Up key. (If you do not see the logo, retry the process.)
6. Now go to the folder where you extracted the flash tools and factory firmware and run the flash-all.bat by double clicking on it.
7. A command window will open and the flashing procedure will start. (Make sure that your device does not disconnect from your PC during the procedure.)
8. The command window will automatically close once the procedure is completed.
9. Disconnect your device and boot it up by pressing the Power button. (Since this is first boot after flashing the firmware, it may take upto 5 minutes.)
Done you should be back on cm 12.1
Credits – ArnavG (Yuplaygod Forums) and Cyanogen Team.
im also having same problem i have also unknowingly wiped system & now im not able to flash any rom while flashing its rebooting automatically & i am able to enter in to fastboot mode then i have flashed factory firmware then also its not booting stucked on boot loop.
arunbiju969 said:
Hey are you able to boot into fastboot mode? If you can....
Prerequisites –
1. Make sure that you have 70-80% battery on your phone.
2. You need a PC and a USB cable to connect your phone to the PC.
3. Flashing the factory firmware will wipe all the data present in the internal memory. So, make a backup of that if you can.
4.Install all the necessary Device drivers.
DOWNLOADS -
1. Download the flash tools from here . http://www.mediafire.com/download/87gfz7mdch188an/Flashtools_For_Yu_Yureka.zip
2. Download the factory firmware from Here (cm 12.1) . http://builds.cyngn.com/factory/tomato/cm-12.1-YOG4PAS3JM-tomato-signed-fastboot.zip
Steps To Flash Factory Firmware –
1. Extract the flashtools zip in a new folder on the desktop.
2. Extract the factory firmware zip in the same folder and make sure that all of the flashtools files are also present.
3. Now, power off your phone. If you are stuck in a bootloop, then pull out the battery and reinsert it. (Do not switch on the phone.)
4. While pressing the Volume Up key, connect your phone to the PC with the help of a USB cable.
5. You should now see the fastboot logo on your device. If you did, leave the Volume Up key. (If you do not see the logo, retry the process.)
6. Now go to the folder where you extracted the flash tools and factory firmware and run the flash-all.bat by double clicking on it.
7. A command window will open and the flashing procedure will start. (Make sure that your device does not disconnect from your PC during the procedure.)
8. The command window will automatically close once the procedure is completed.
9. Disconnect your device and boot it up by pressing the Power button. (Since this is first boot after flashing the firmware, it may take upto 5 minutes.)
Done you should be back on cm 12.1
Credits – ArnavG (Yuplaygod Forums) and Cyanogen Team.
Click to expand...
Click to collapse
Bro tried that but nothing........
rss3183 said:
Bro tried that but nothing........
Click to expand...
Click to collapse
Can you be more specific ? Are you facing boot loop too?
anybody please help... facing the same problem and tried the solution as mentioned above but still facing Boot loop. what to do friends. please reply
I suddenly faced bootloop.....then I tried to flash stock rom without root...as a web page suggested me that....it was flashed successfully ...but still I am facing bootloop issue .....can someone pls help me to get out of this mess....pls help me...ASAP !!!
arunbiju969 said:
Hey are you able to boot into fastboot mode? If you can....
Prerequisites –
1. Make sure that you have 70-80% battery on your phone.
Click to expand...
Click to collapse
as its in boot loop battery has come to an end.... now what? having same problem as the topic creator
If you can boot into fastboot try flashing the Twrp from a computer,if you need steps on how to flash Twrp Post here if the flash is successfull boot into recovery and flash A new rom and this should boot your device
arunbiju969 said:
If you can boot into fastboot try flashing the Twrp from a computer,if you need steps on how to flash Twrp Post here if the flash is successfull boot into recovery and flash A new rom and this should boot your device
Click to expand...
Click to collapse
I flashed the factory image via YGDP tool as well as fastboot. But it boots upto a point and then goes in bootloop. Also if i wipe data/cache still it makes no difference. Also unlocked bootloader and twrp also don't load up. Again goes in bootloop.
Yogesh1969 said:
I flashed the factory image via YGDP tool as well as fastboot. But it boots upto a p loopoint and then goes in bootloop. Also if i wipe data/cache still it makes no difference. Also unlocked bootloader and twrp also don't load up. Again goes in bootloop.
Click to expand...
Click to collapse
were you trying to flash the twrp for the first time?? Was your yureka plus on stock kitkat??
Sorry for a late reply...
arunbiju969 said:
were you trying to flash the twrp for the first time?? Was your yureka plus on stock kitkat??
Click to expand...
Click to collapse
The problem got solved bcos it had a battery problem !!!! Battery showed 90-100%, but could not hold up on boot.
A very strange case. Thanks.
Hi, I flashed my Yu Yureka AO5512 Yesterday and entered into recovery mode and selected the wipe userdata option. When it was doing the process after 20min the process stopped all together and My phone does not start at all now. If i press any button there is no response at all. Looks like phones OS and everything is wiped out. How do i go about from here?
Same problem , Stuck in BootLoop
arunbiju969 said:
were you trying to flash the twrp for the first time?? Was your yureka plus on stock kitkat??
Click to expand...
Click to collapse
Bro , my Yureka was on Stock Lollipop (5.1) and i flashed Twrp 2.8x.x on it and now it''s Stuck in bootloop , i can't turn of the phone nor it starts , what should i do , any help appreciated
Thanks
YuganshT7 said:
Bro , my Yureka was on Stock Lollipop (5.1) and i flashed Twrp 2.8x.x on it and now it''s Stuck in bootloop , i can't turn of the phone nor it starts , what should i do , any help appreciated
Thanks
Click to expand...
Click to collapse
Sorry to hear that anyway,
By stock lolipop you mean you had the yureka plus with Volte From factory right!!...if so the twrp might have been for the yureka plus with the cm bootloader which got replaced in the new Devcice
I am facing the same problem and in my case I dont think its an battery issue...I was happily using the CM 13.0 Snapshot Rom since a long time...but today morning when I did a soft reset by going into the settings in my yureka...the phone has gone in bootloop...and nothing is working...using fastboot I even flashed the twrp again and also flashed the CM 12.0 Stock firmware..but nothing is working...after the YU logo it restarts....please help...
I am also facing problem maybe worst
I dont know what wrong I am doing but I am getting "FAILED (remote: unknown command)".
Few info:
1. I get my device ID when I do "fastboot devices" but nothing on fastboot -i 0x1ebf oem device-info".
2. Also for my YU5510A fastboot screen doesnt say' "fastboot" it says "Information do not unplug the cable - Secure Phone".
3. I have red light on, phones keeps rebooting 4-5 times than red light goes off and charging stops.
Aditi Apte said:
I dont know what wrong I am doing but I am getting "FAILED (remote: unknown command)".
Few info:
1. I get my device ID when I do "fastboot devices" but nothing on fastboot -i 0x1ebf oem device-info".
2. Also for my YU5510A fastboot screen doesnt say' "fastboot" it says "Information do not unplug the cable - Secure Phone".
3. I have red light on, phones keeps rebooting 4-5 times than red light goes off and charging stops.
Click to expand...
Click to collapse
Ignore that and use other fastboot commands and go ahead, as your device is being detected in fastboot mode.
FAILED (remote: unknown command)
Yogesh1969 said:
Ignore that and use other fastboot commands and go ahead, as your device is being detected in fastboot mode.
Click to expand...
Click to collapse
But when I am executing other fastboot commands it halts the process between with error "FAILED (remote: unknown command)".
I have read about this error and people suggested that I need to get into "Download mode" not "fastboot/bootload". To get into "download" mode I tried pressing "VoulumeDown+Power+Home", but nothing happened, it simply restarted the phone.
Please advise.
-Aditi
Hi all, recently i've flashed Nitrogen rom with kernel, but i was flashed the wrong kernel. 2202, mine is 2203. The phone is rebooted but no screen just it's screen on. After reflash the right kernel, 2203, everything got to normal but my bootloader is missing. Can't access to him. I try everything, reboot mode in bootloader, vol - power. The phone boot but by pass the bootloader and goes directly to system. I tried resolving issue with Sony companion but an error when he told me to reboot with vol- power, it's booted directly to system after few second.
Someone can help me ? Please.
Thks
Try with Emma (Sony flashtool) insted of Sony companion or use Flashtool by androxyde (community flashtool) and flash .ftf file.
Thks i'll try it.
Doesnt work. The will boot directly to system.
Help please !
Do you use correct combo? Does volume keys work?
Yes the correct combo vol down and usb. Reboot via system to bootloader the same. The phone stay few second to screen off with Led orange and boot to system. But boot to team recovery works perfect, blue Led and i'm in....