Hi all xda users, i need some help here, i installed this (http://forum.xda-developers.com/showthread.php?t=1583430) rom from annson08 Stock Firmwares - bootloader removed - 100% SAFE TO FLASH, yep i know the reason was to avoid a hard brick for my pda ( G-Fit), so i want to know how do i install another rom if the bootloader its removed from this device, i can´t access to download mode, i can just get in recovery mode and Emergency D-load Arm9, so what can i do to get in download mode and flash it (another rom) through odin? or can i flash through recovery (install from zip feature?)
Thanks in advance!
bootloaders are not removed, you can still go to download mode, recovery mode, arm11 mode this is just your thinking
without bootloader your mobile can't even light up
dheeraj (dhlalit11) said:
bootloaders are not removed, you can still go to download mode, recovery mode, arm11 mode this is just your thinking
without bootloader your mobile can't even light up
Click to expand...
Click to collapse
Yep, thanks for the answer, so i need to know how do i get in download mode ( Vol down+ center key + pw on, vol up + pw on, vol up. down + pw on doesn't work) i only can get to recovery and emergency dload arm9
Thanks again!
volume down + power + home button should work, first try it
if it don't work then you will need adb
JosBa said:
Hi all xda users, i need some help here, i installed this (http://forum.xda-developers.com/showthread.php?t=1583430) rom from annson08 Stock Firmwares - bootloader removed - 100% SAFE TO FLASH, yep i know the reason was to avoid a hard brick for my pda ( G-Fit), so i want to know how do i install another rom if the bootloader its removed from this device, i can´t access to download mode, i can just get in recovery mode and Emergency D-load Arm9, so what can i do to get in download mode and flash it (another rom) through odin? or can i flash through recovery (install from zip feature?)
Thanks in advance!
Click to expand...
Click to collapse
Actually, I just removed the bootloader from the installer of stock roms so that the original bootloader from your gingerbread phone wouldn't be replaced, but that doesn't necessary means that the bootloader of your phone would also be removed.
annson08 said:
Actually, I just removed the bootloader from the installer of stock roms so that the original bootloader from your gingerbread phone wouldn't be replaced, but that doesn't necessary means that the bootloader of your phone would also be removed.
Click to expand...
Click to collapse
it is the time to change your op with this info to prevent further misunderstandings
Ty guys for your answers, now my phone doesn´t boot since last night, well it does but my screen is in blank :S, i´ll buy a usb jig :S
Related
Hi,
The power button of my transformer is broken :
I can't power on the device, but I can light on/off the screen.
In order to fix it, I've got to send it to the customer service, but before I need to flash it back to stock.
To flash it I need to go to bootloader or download mode (I dunno what volume+/power is??)
Here is the thing, I did some searches and I tried :
- via adb
- directly from the terminal emulator
- via some widgets with boot mode selection
None of these work, all these methods make the transformer perform a normal reboot.
I'm rooted, and my rom is one of the first ICS beta Revolver.
I just need to flash it back to stock.
Thx in advance.
Reboot into bootloader without power button
Hi fastreward,
It should be possible to boot into recovery from software; for example, I've seen Megatron Parts (for Megatron ROM) boot into recovery after downloading some Plugin.
ROM Manager has an option to reboot into recovery, have you tried it? I think I used one of the options of ROM Manager to update something in my phone (not the ROm nor in my tablet) because it was part of the process, and I believe it rebooted into recovery.
Hope it helps so you can restore your Transformer to STOCK and send it to service.
fastreward said:
Hi,
To flash it I need to go to bootloader or download mode (I dunno what volume+/power is??)
Click to expand...
Click to collapse
Vol up + power button get you into APX mode.
(Good only if you're SBK v1 for NVFLash)
If you have CWM recovery, this will boot you into it.
https://play.google.com/store/apps/details?id=com.transformer.recovery&feature=search_result
Vol up + power button get you into APX mode.
(Good only if you're SBK v1 for NVFLash)
Click to expand...
Click to collapse
Thanks ! Maybe there is a command to reboot in APX mode ?
If you have CWM recovery, this will boot you into it.
Click to expand...
Click to collapse
I hope there is a way to go back to stock via the recovery
fastreward said:
Thanks ! Maybe there is a command to reboot in APX mode ?
I hope there is a way to go back to stock via the recovery
Click to expand...
Click to collapse
If you have CWM recovery, just download an official firmware from Asus website.
Extract the zip file from within, put it on your sd card (or where ever CWM can see it)
Flash the zip file and once reboot you'll be unroot with stock recovery.
(Wipe data, cache and dalvik cache before flashing)
If you can get the tf to do a normal reboot, just hold down the Volume-Down button as it's doing that, and when the screen pops up it will ask checking-for-rck then press volume up to boot into the recovery image, no power button required. (note you do need it to select in recovery, unless you have touch version)
Alternative hold vol-up while soft rebooting to go into APK (sbkv1 only)
View attachment 2520985
Hi guys , I'm really new to this android system world and I did mistake when changing the android because the old one always shows the kernel failed and it will automatic shut down whenever I switch on the phone . When I change it , I forgot to unlock the bootloader and it also don't have any recovery mode . I didn't clear the kernel or cache because i forgot to install the recovery mode . I just install another android version without clearing the cache . After the installation , it turned like this . Please Help me ! It only can open ODIN launcher. I already try anything but still it cannot started . Boot looping -_- . Is there anything that I can do guys ?
Flash JB firmware again with Odin. ( if you're on JB, otherwise GB)
Can u go to download mode?
Sent from my GT-I9070 using Tapatalk
syahmieavaris said:
View attachment 2520985
Hi guys , I'm really new to this android system world and I did mistake when changing the android because the old one always shows the kernel failed and it will automatic shut down whenever I switch on the phone . When I change it , I forgot to unlock the bootloader and it also don't have any recovery mode . I didn't clear the kernel or cache because i forgot to install the recovery mode . I just install another android version without clearing the cache . After the installation , it turned like this . Please Help me ! It only can open ODIN launcher. I already try anything but still it cannot started . Boot looping -_- . Is there anything that I can do guys ?
Click to expand...
Click to collapse
That image you posted shows charging of the phone, when you turn on phone - pull out USB cable.
Now what to do, flash stock JB firmware with Odin from Download mode. After it is finished if you get a bootloop - go to recovery and do factory reset. You must have recovery, you do not need to install it - it is 100% there, installed alongside kernel.
If you do not have recovery now I assume you had JB and after that you flashed GB. Or if I am wrong, tell us what did you do exacly. What ROM did you install?
If you can go to download mode just flash stock rom you had before with odin as suggested above, it should work again.
Same thing happened to me the very first time I tried to install mod kernel/rom , and this was how I recovered the phone...
If you can't access download mode, I wouldn't know what to do...
This device dun have a recovery mode . I tried to press Volume UP + Home key + Middle button together but stIll it cannot enter the recovery mode .
syahmieavaris said:
This device dun have a recovery mode . I tried to press Volume UP + Home key + Middle button together but stIll it cannot enter the recovery mode .
Click to expand...
Click to collapse
Try Vol - + home + power to get download mode, then flash stock rom, i you don´t know how to use ODIN please google it, sorry my poor English
syahmieavaris said:
This device dun have a recovery mode . I tried to press Volume UP + Home key + Middle button together but stIll it cannot enter the recovery mode .
Click to expand...
Click to collapse
Not recovery mode is download mode.......
Sent from my GT-I9070 using Tapatalk
I already flashed a stock rom but the result is still same like always . I still cannot access to recovery mode . What should I do now ? I already press the Volume down+ Home key + Shutdown button but it just make the phone to reboot
Can you list clearly all the steps you did from the beginning to get to this point, with details of what android version you had before and which one you tried to flash later?
Inviato dal mio GT-I9070 utilizzando Tapatalk
=)
Volup + home +power = recovery mode
voldown + home + power = download mode
Make sure you are using propper key combination to access what you need
Sent from my SGS Adv. using xda-developers app.
yesterday I left my phone to my litter broter's hand and i dont know why he put me a pattern code which i don't know it
I tried to boot in recovery mode(vol up + power) to reset it, but it boots normally, I tried to boot it in download mode (vol down + power) but it boots in normal mode too
I downloaded companion soft to reset it, but the soft doesnt let me to use it because it is pattern locked
I downloaded the flashtool and all drivers, installed them and followed all steps from here:
//oi59.tinypic.com/25tx569.jpg
and when i hit the flash button i get this error:
//oi57.tinypic.com/359fr5h.jpg
(i cant post links)
what can i do to restore my phone? i flashed and installed custom and stock roms on many samsung's but this xperia is over my powers
devilboost said:
yesterday I left my phone to my litter broter's hand and i dont know why he put me a pattern code which i don't know it
I tried to boot in recovery mode(vol up + power) to reset it, but it boots normally, I tried to boot it in download mode (vol down + power) but it boots in normal mode too
I downloaded companion soft to reset it, but the soft doesnt let me to use it because it is pattern locked
I downloaded the flashtool and all drivers, installed them and followed all steps from here:
//oi59.tinypic.com/25tx569.jpg
and when i hit the flash button i get this error:
//oi57.tinypic.com/359fr5h.jpg
(i cant post links)
what can i do to restore my phone? i flashed and installed custom and stock roms on many samsung's but this xperia is over my powers
Click to expand...
Click to collapse
Download latest .ftf for XJ, with Flashtool flash .ftf via flashmode (green led)
Hello,
i need Help.
I had ATJ1 Atj1 atj5 on my Phone and don´t get Beta 11.
Ok, is not the Provider Software DTM on my Phone and i think: Flash the DTM Firmware.
I have do it.
Now my Handy don´t Boot and i can´t Flash ATJ1 Atj1 atj5 to repair.
What can i do now?
woodchild said:
Hello,
i need Help.
I had ATJ1 Atj1 atj5 on my Phone and don´t get Beta 11.
Ok, is not the Provider Software DTM on my Phone and i think: Flash the DTM Firmware.
I have do it.
Now my Handy don´t Boot and i can´t Flash ATJ1 Atj1 atj5 to repair.
What can i do now?
Click to expand...
Click to collapse
1. Try booting to recovery and factory reset from there: To boot into recovery mode, start by turning off your Galaxy Note 20. Once completely off, hold the volume up button and the power button
2. You can also try flashing update.zip if you have one. In case you dont skip to point 3 below.
3. If that doesnt work you can boot to Download mode and flash a new firmware using Odin.
warriorvibhu said:
1. Try booting to recovery and factory reset from there: To boot into recovery mode, start by turning off your Galaxy Note 20. Once completely off, hold the volume up button and the power button
2. You can also try flashing update.zip if you have one. In case you dont skip to point 3 below.
3. If that doesnt work you can boot to Download mode and flash a new firmware using Odin.
Click to expand...
Click to collapse
Got it. Thank you
woodchild said:
Got it. Thank you
Click to expand...
Click to collapse
Did it work. Are you back on your phone ?
Hi,
I've managed to brick my S21+, after a mistake during flashing of a newer twrp version with Odin.
I basically placed the (patched) stock AP file in the AP slot instead of the TWRP tar, and the vbmeta_disabled_R.tar in the userdata slot.
After reboot, I got a boot loop, and I am not able to boot to recovery or to download mode as before when using the key-combo.
Previous to this flashing, I had the TWRP 3.6 and Lineageos 19 GSI for about 6 months, with no issues.
My question - how can I get to Download mode now? and is it possible that I ran over my recovery?
Is it possible that the download mode is no longer available due to the AP flashing (no BL, CSC files)?
Appreciate any suggestion and help!
connect it to the PC and do the combination that you did before, that is volume up and volume down pressed at the same time, that same thing happened to me, when I wanted to update twrp better install the stock first and then the new recovery, so you take advantage of updating the firmware of the phone and the new recovery
Strangely, the recovery entry or download does not work without being connected, so I recommend you better install the magisk to enter the recovery from there, otherwise you will have to do that process when you want to update or install custom roms
CallmeNeos503 said:
Strangely, the recovery entry or download does not work without being connected, so I recommend you better install the magisk to enter the recovery from there, otherwise you will have to do that process when you want to update or install custom roms
Click to expand...
Click to collapse
Thanks for your reply!
the key-combo in S21x are with USB plugged to PC, otherwise recovery cannot be reached, unless using ADB command. I have tried this many times since the wrong Odin flash occurred, but nothing happens except from reboot, warning screen (about unofficial software) and reboot again.
Even previous to the bricking, typically in order to get to download mode in this device, you need to go through recovery first and then select download mode. Alternatively, adb reboot download command, but neither are now an option.
So my last resort was a USB-JIG device to get to download mode - but I don't know of any such device for a USB-C connection.
Anyone here has experience with that? or can direct me to such a device for the newer Samsung models?
Thanks!
Wl40WaBL9hQcjo said:
CallmeNeos503 said:
connect it to the PC and do the combination that you did before, that is volume up and volume down pressed at the same time, that same thing happened to me, when I wanted to update twrp better install the stock first and then the new recovery, so you take advantage of updating the firmware of the phone and the new recovery
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Thanks for your help! - indeed the PLUS and MINUS volume keys with the usb cable plugged in gets you directly to d/l mode. I just tried it with the power key all the time, as in previous models, and that got me nothing.
Issue solved!