Related
Hello, i want help please, anyone can you tell me how to get odin to detect my phone coz it is not detecting the ohne and i m stuck in d middle of installing ics on my phone.
Restart everything
Restart you phone into d/w mode (if your hardware buttons are working ), restart you computer. Now it should detect.
And while you're in the process of flashing, make sure you the cable doesn't get disconnected.
This happened with me too, I just deleted odin & again extracted it from the rom folder(In every kyrillos rom package you can find odin)...
Just delete the old odin & get a new one, it will work...
Sent from my GT-I5800 using Tapatalk
suryarockzz said:
Hello, i want help please, anyone can you tell me how to get odin to detect my phone coz it is not detecting the ohne and i m stuck in d middle of installing ics on my phone.
Click to expand...
Click to collapse
Is this the first time you are using odin in your computer ? or your already detected before only now it is not detecting ?
because odin works fine in my computer , but wen i try it in my friend's computer
it did not detect
-> reinstall your phone drivers it might help
-> if i am correct Odin detect your phone only in download mode
Come out of odin and just plug your phone in to the comp, if the comp recognises it then you know your usb drivers are working fine on phone and comp, if not then thats your problem. reinstall drivers.
If it did recognise then the problem is with odin. Theres loads of versions out there that have pathway issues and other problems due to the way theyve been aquired or packaged. try typing "I5800_Odin_Multi_Downloader_v4.252.exe" its what i did and mine works everytime.
If i helped, hit thanks
Try with another USB port. It will probably work if you´d try, because I had a similar problem. PC simply didn't recognize my Samsung Galaxy 3, but when I plugged the phone in another USB port, the phone was recognized and so was Odin. But of course it wont go without appropriate drivers.
I had the same problem yesterday and switching USB-ports didn't help. It seemed I didn't have Kies installed so the USB-drivers were missing... After installing Kies everything went fine
hey, I had the same issue.. and what I did to resolve was : I downloaded USB drivers from the below link..installed and rebooted my system..and tried again..it finally got detected..I hope it helps..
link for drivers :
forum.xda-developers.com/showthread.php?t=728929
What worked for me was after installing the Samsung driver, I updated the driver from the Device Manager while the phone was plugged in and in download mode.Odin found the phone after that.
Battery percentage
Make sure your Battery Percentage is More than 50 %
Check your USB cable is in Working Condition .....
-fgfgdf
Hi xda, I need some help here on my lenovo A850.
Whenever I plugged it to my pc, it don't pop up any usb connection option and my pc didn't even detect it.
I can't use flashtool since pc didn't detect my phone.
What should I do?
I've rooted it using framaroot and installed cwm using mtk uncle.
Should I just try and flash other rom via cwm?
Really appreciate any help from anyone here.
Have a nice day.
balachis said:
Hi xda, I need some help here on my lenovo A850.
Whenever I plugged it to my pc, it don't pop up any usb connection option and my pc didn't even detect it.
I can't use flashtool since pc didn't detect my phone.
What should I do?
I've rooted it using framaroot and installed cwm using mtk uncle.
Should I just try and flash other rom via cwm?
Really appreciate any help from anyone here.
Have a nice day.
Click to expand...
Click to collapse
Do you hear the windows sounds of connecting / disconnecting devices? If not, your cable must not working...
Else, try installing the USB drivers from here.
You can install roms from CWM BUT if anything goes wrong, flash tool can almost always fix it.
So i advice you, before installing anything make sure that your phone can connect to flash tool.
GreatApo said:
Do you hear the windows sounds of connecting / disconnecting devices? If not, your cable must not working...
Else, try installing the USB drivers from here.
You can install roms from CWM BUT if anything goes wrong, flash tool can almost always fix it.
So i advice you, before installing anything make sure that your phone can connect to flash tool.
Click to expand...
Click to collapse
Nope nothing from my pc and nothing from phone. Even flashtool can't detect it. I'm on win 7 32 bit
balachis said:
Nope nothing from my pc and nothing from phone. Even flashtool can't detect it. I'm on win 7 32 bit
Click to expand...
Click to collapse
Do not expect to connect to flashtool if it doesn't connect to your PC.
From what you are saying it seems to me that the cable or the phone or the USB port has problem.
Try these: (until you hear a windows sound or see the phone charging)
- Try an other USB port
- Try on an other PC
- Try an other cable
- Try mounting from Recovery?
You can also try installing the USB drivers from the link i gave you in my previous post...
GreatApo said:
Do not expect to connect to flashtool if it doesn't connect to your PC.
From what you are saying it seems to me that the cable or the phone or the USB port has problem.
Try these: (until you hear a windows sound or see the phone charging)
- Try an other USB port
- Try on an other PC
- Try an other cable
- Try mounting from Recovery?
You can also try installing the USB drivers from the link i gave you in my previous post...
Click to expand...
Click to collapse
Sent my phone to repair its usb..lolz
Thanks guys.. Really appreciate it..
I'll be hanging around in xda lenovo development forum..
Gotta learn some rom flashing methods..
GreatApo said:
Do not expect to connect to flashtool if it doesn't connect to your PC.
From what you are saying it seems to me that the cable or the phone or the USB port has problem.
Try these: (until you hear a windows sound or see the phone charging)
- Try an other USB port
- Try on an other PC
- Try an other cable
- Try mounting from Recovery?
You can also try installing the USB drivers from the link i gave you in my previous post...
Click to expand...
Click to collapse
please gan , my problem is the same , it can be for the charger , but can not connect pc then, no noise at all in the pc , I've tried to move pc , replace the cable usb.
I tried to downgrade the kitkat version because I couldn't update my apps, using a flash tool.
It then shut down and now does not turn on at all. When I plug into the computer the USB gets into a cycle/loop of connect and disconnect. Please help me if you have the time.
lenover9000 said:
I tried to downgrade the kitkat version because I couldn't update my apps, using a flash tool.
It then shut down and now does not turn on at all. When I plug into the computer the USB gets into a cycle/loop of connect and disconnect. Please help me if you have the time.
Click to expand...
Click to collapse
Does it vibrates or display anything?
Tyaginator said:
Does it vibrates or display anything?
Click to expand...
Click to collapse
no. But I think it goes on '''META MODE'" ONLY on the computer for a few seconds.
Thanks for commenting.
Check device manager in your pc when you connect your phone, is it showing MTK 65xx preloader
Tyaginator said:
Check device manager in your pc when you connect your phone, is it showing MTK 65xx preloader
Click to expand...
Click to collapse
It shows Mediatek preloader usb vcom port (com7) alternating with mtk usb port (com6).
lenover9000 said:
It shows Mediatek preloader usb vcom port (com7) alternating with mtk usb port (com6).
Click to expand...
Click to collapse
U must have flashed some other device's firmware and which guide u have followed
Tyaginator said:
U must have flashed some other device's firmware and which guide u have followed
Click to expand...
Click to collapse
I used this one.
forums (dot) lenovo (dot) com/t5/A-and-P-Series/Lenovo-A536-stuck-during-firmware-upgrade/td-p/1744571[/url]
I downloaded the latest firmware from
"THIS is the latest original ROW firmware (PC Flash Tool installation)"
This whole guide was fine, it worked for me.
But the problem was when I tried to downgrade the firmware to an older version.
I tried to replace the lastest official firmware with this one ROM Android 4.4.2 (older official needrom(dot)com/download/lenovo-a536/
sorry can't link websites yet
http://forum.xda-developers.com/showthread.php?t=1943442
Try this thread
Tyaginator said:
http://forum.xda-developers.com/showthread.php?t=1943442
Try this thread
Click to expand...
Click to collapse
Thank you so much for staying with me to solve this problem. The phone is fixed.
I followed the
"
For MT6575/ 77
With the battery out, hold the volume up, don't let go & plug in the USB cable will activate META mode for few seconds...Typically, you need to click Download at SP Flash Tool before entering META mode or it will auto disconnected...
"
except I downloaded the lenovo a536 stock rom.
the only thing I did different was that I plugged in (META MODE) and THEN pressed download or else the usb would never be detected (they both show different COM numerals.)
After that I firmly held the whole usb into the phone during the whole flashing, or else it might get automatically disconnected again.
Then I updated/upgraded to the latest firmware, And it is all optimal. :good:
THANKS AGAIN !!!
lenover9000 said:
Thank you so much for staying with me to solve this problem. The phone is fixed.
I followed the
"
For MT6575/ 77
With the battery out, hold the volume up, don't let go & plug in the USB cable will activate META mode for few seconds...Typically, you need to click Download at SP Flash Tool before entering META mode or it will auto disconnected...
"
except I downloaded the lenovo a536 stock rom.
the only thing I did different was that I plugged in (META MODE) and THEN pressed download or else the usb would never be detected (they both show different COM numerals.)
After that I firmly held the whole usb into the phone during the whole flashing, or else it might get automatically disconnected again.
Then I updated/upgraded to the latest firmware, And it is all optimal. :good:
THANKS AGAIN !!!
Click to expand...
Click to collapse
Glad it's fixed
I Too Need help my lenovo a536 is bricked
My phone is not booting , unable to install USB VCOM Drivers and it is constantly going off while installing and unable to install driver ,phone vibrates shows logo but it goes in bootloop pls help urgent:crying:
prathamsd4 said:
My phone is not booting , unable to install USB VCOM Drivers and it is constantly going off while installing and unable to install driver ,phone vibrates shows logo but it goes in bootloop pls help urgent:crying:
Click to expand...
Click to collapse
What do u mean by "it is constantly going off while installing"
Does it boot in recovery mode? Please be as specific as you can while posting questions.
Sent from a Device using an App!
Tyaginator said:
What do u mean by "it is constantly going off while installing"
Does it boot in recovery mode? Please be as specific as you can while posting questions.
Sent from a Device using an App!
Click to expand...
Click to collapse
it does not boot in recovery mode,
while trying to install mediatek usb vcom drivers phone constantly connects and disconnect and i am unable to install drivers..
prathamsd4 said:
it does not boot in recovery mode,
while trying to install mediatek usb vcom drivers phone constantly connects and disconnect and i am unable to install drivers..
Click to expand...
Click to collapse
I don't think you need to connect phone during installing drivers and phone will stay connected after properly installing DA Vcom drivers
Sent from a Device using an App!
I have similar problem
Hi, please I need your help. I tried to flash stock ROM but I hard bricked my phone. When I connect phone with computer I'm holding volume up button. In device manager it shows "MediaTek USB Port (COM4)" but after three seconds it disconnect. This is why I can't flash ROM. It's everytime disconnect after three seconds.. Please help me.
Lenovo A536
Please help me guys, where is GND and COLO point of lenovo a536
same problem
i have a lenovo a536 and when i flash the stock
it goes to a cycle of off and on , help me to fix this
ive tried a lot of stock roms i searched,and none of them worked , the cycle of turning off and on is still there
My phone is xolo era. I rooted it 2 days ago, I also changed the startup animation after rooting, then i thought about having on screen buttons, although i have capacitive physical button of my phone, but still. I tried to get on screen buttons by an app called pimp my rom, after switching on-screen buttons, it asked for a restart, which i did. But after that, when i switch my phone on, just after that it says unfortunately, com.google.androidui has stopped working, when I press ok, it comes again, keeps on coming continuously. I also tried to boot into recovery mode, but xolo sign comes up, again screen becomes black, again xolo sign, again black...............
How can I get my phone into recovery or change the rom by computer?
Please help me.
Maybe this can save your phone
http://firmwarefile.com/xolo-era
joe2k01 said:
Maybe this can save your phone
Click to expand...
Click to collapse
Dude, u saved my life. Thanks. Thanks a lot.
You are welcome
joe2k01 said:
You are welcome
Click to expand...
Click to collapse
But the SPD tool is not detecting my device. I haven't switched on the usb debugging, is it the reason? Now I can't turn it on too, because phone is not functional. Please help me again, thanxx.
SP flash tool can recognize your phone only if is turned off and if you have installed the USB vcom preloader driver
joe2k01 said:
SP flash tool can recognize your phone only if is turned off and if you have installed the USB vcom preloader driver
Click to expand...
Click to collapse
SPD tool is stuck at 'checking baudrate'
Help me please.
Have you installed the driver correctly?
joe2k01 said:
Have you installed the driver correctly?
Click to expand...
Click to collapse
Yes, i have installed the spreadtrum drivers. Do i need to install adb drivers for my phone also?
You need to install the USB VCOM preloader driver
joe2k01 said:
You need to install the USB VCOM preloader driver
Click to expand...
Click to collapse
Yeah.. I have installed those driver. USB VCOM preloader drivers are for mediatek, I have downloaded same drivers for spreadtrum. What may be the problem?
Will odin do the job if I try it?
No odin is only for Samsung devices
joe2k01 said:
No odin is only for Samsung devices
Click to expand...
Click to collapse
Any other software that can do the job?
Check if the manufacturer of your phone provides a tool like Odin, if not you can only use SP-flash tool.
joe2k01 said:
Check if the manufacturer of your phone provides a tool like Odin, if not you can only use SP-flash tool.
Click to expand...
Click to collapse
Nope, nothing like this available. I dont think there is any other way to flash this. Just tell me how can i get to boot recovery. I tried 10000 times by using those buttons but nothing happened. Any other way to boot into recovery?
Are you connecting the phone turned on or turned off, because SP-flash tool can recognize your phone only if is turned off
joe2k01 said:
Are you connecting the phone turned on or turned off, because SP-flash tool can recognize your phone only if is turned off
Click to expand...
Click to collapse
Turned off, I am even pressing the volume down key while connecting to usb so that it doesnt start charging.
It even recognizes my device, but gets stuck at checking baudrate
When it says checking baudrate try to unplug your battery and then replug-in
joe2k01 said:
When it says checking baudrate try to unplug your battery and then replug-in
Click to expand...
Click to collapse
when i unplug the battery, it says unplugged, when i plug it back in, it again starts checking
Can it be a problem with my phone ???
OK... Maybe I have the solution now.
Follow this step:
1) Open SPD
2) Load the .pac firmware
3) Open the settings
4) Decrease the baudrate
5) FLash
İ use custom rom and i disabled OEM unlocking and restart my phone. Phone cant boot. My USB port isnt work and i cant use odin. Cant open twrp. Actually isnt broken but my PC cant recognize my phone i try different cable, pc and driver but Windows says unkown device.
nereloyka13 said:
İ use custom rom and i disabled OEM unlocking and restart my phone. Phone cant boot. My USB port isnt work and i cant use odin. Cant open twrp. Actually isnt broken but my PC cant recognize my phone i try different cable, pc and driver but Windows says unkown device.
Click to expand...
Click to collapse
How did you flash TWRP and custom if your USB port isn't working?
Download Mode is independent of ROM so unless your hardware got damaged since flashing custom, there's no reason it shouldn't work
Try installing Samsung S7 driver again, remove old drivers from device manager first while phone is connected / enabled "Show hidden devices" from device manager while phone is disconnected and remove old drivers
Windows should install the correct driver itself
*Detection* said:
How did you flash TWRP and custom if your USB port isn't working?
Download Mode is independent of ROM so unless your hardware got damaged since flashing custom, there's no reason it shouldn't work
Try installing Samsung S7 driver again, remove old drivers from device manager first while phone is connected / enabled "Show hidden devices" from device manager while phone is disconnected and remove old drivers
Windows should install the correct driver itself
Click to expand...
Click to collapse
İ try 4 different PC. İ charge my phone with wall charher but phone see USB charging. İ install twrp with odin but i cant use odin now. Windows says unkown device and odin cant recognize. https://forum.xda-developers.com/galaxy-s7/help/usb-device-recognized-fast-charge-t357118/ its my problem
That link redirects me to here
https://forum.xda-developers.com/showthread.php?t=357118
If you have tried 4 PCs, and different USB cables then you need to get your USB port on the phone replaced / repaired
*Detection* said:
That link redirects me to here
https://forum.xda-developers.com/showthread.php?t=357118
If you have tried 4 PCs, and different USB cables then you need to get your USB port on the phone replaced / repaired
Click to expand...
Click to collapse
https://forum.xda-developers.com/galaxy-s7/help/usb-device-recognized-fast-charge-t3571184/page2 you can see my comment page 2