My phone is xolo era. I rooted it 2 days ago, I also changed the startup animation after rooting, then i thought about having on screen buttons, although i have capacitive physical button of my phone, but still. I tried to get on screen buttons by an app called pimp my rom, after switching on-screen buttons, it asked for a restart, which i did. But after that, when i switch my phone on, just after that it says unfortunately, com.google.androidui has stopped working, when I press ok, it comes again, keeps on coming continuously. I also tried to boot into recovery mode, but xolo sign comes up, again screen becomes black, again xolo sign, again black...............
How can I get my phone into recovery or change the rom by computer?
Please help me.
Maybe this can save your phone
http://firmwarefile.com/xolo-era
joe2k01 said:
Maybe this can save your phone
Click to expand...
Click to collapse
Dude, u saved my life. Thanks. Thanks a lot.
You are welcome
joe2k01 said:
You are welcome
Click to expand...
Click to collapse
But the SPD tool is not detecting my device. I haven't switched on the usb debugging, is it the reason? Now I can't turn it on too, because phone is not functional. Please help me again, thanxx.
SP flash tool can recognize your phone only if is turned off and if you have installed the USB vcom preloader driver
joe2k01 said:
SP flash tool can recognize your phone only if is turned off and if you have installed the USB vcom preloader driver
Click to expand...
Click to collapse
SPD tool is stuck at 'checking baudrate'
Help me please.
Have you installed the driver correctly?
joe2k01 said:
Have you installed the driver correctly?
Click to expand...
Click to collapse
Yes, i have installed the spreadtrum drivers. Do i need to install adb drivers for my phone also?
You need to install the USB VCOM preloader driver
joe2k01 said:
You need to install the USB VCOM preloader driver
Click to expand...
Click to collapse
Yeah.. I have installed those driver. USB VCOM preloader drivers are for mediatek, I have downloaded same drivers for spreadtrum. What may be the problem?
Will odin do the job if I try it?
No odin is only for Samsung devices
joe2k01 said:
No odin is only for Samsung devices
Click to expand...
Click to collapse
Any other software that can do the job?
Check if the manufacturer of your phone provides a tool like Odin, if not you can only use SP-flash tool.
joe2k01 said:
Check if the manufacturer of your phone provides a tool like Odin, if not you can only use SP-flash tool.
Click to expand...
Click to collapse
Nope, nothing like this available. I dont think there is any other way to flash this. Just tell me how can i get to boot recovery. I tried 10000 times by using those buttons but nothing happened. Any other way to boot into recovery?
Are you connecting the phone turned on or turned off, because SP-flash tool can recognize your phone only if is turned off
joe2k01 said:
Are you connecting the phone turned on or turned off, because SP-flash tool can recognize your phone only if is turned off
Click to expand...
Click to collapse
Turned off, I am even pressing the volume down key while connecting to usb so that it doesnt start charging.
It even recognizes my device, but gets stuck at checking baudrate
When it says checking baudrate try to unplug your battery and then replug-in
joe2k01 said:
When it says checking baudrate try to unplug your battery and then replug-in
Click to expand...
Click to collapse
when i unplug the battery, it says unplugged, when i plug it back in, it again starts checking
Can it be a problem with my phone ???
OK... Maybe I have the solution now.
Follow this step:
1) Open SPD
2) Load the .pac firmware
3) Open the settings
4) Decrease the baudrate
5) FLash
Related
Hi guys
trying to reinstall the stock rom but sptool doesn't detect my phone A420.(DOODLE 2). can't install driver manually because the phone goes to charging mode instantly before i can manually locate the driver.
try different USB port
Pannam said:
Hi guys
trying to reinstall the stock rom but sptool doesn't detect my phone A420.(DOODLE 2). can't install driver manually because the phone goes to charging mode instantly before i can manually locate the driver.
Click to expand...
Click to collapse
try to connect your phone to a different USB port
or install drivers before you connect phone to PC(you can google for drivers)
Pannam said:
Hi guys
trying to reinstall the stock rom but sptool doesn't detect my phone A420.(DOODLE 2). can't install driver manually because the phone goes to charging mode instantly before i can manually locate the driver.
Click to expand...
Click to collapse
i was also facing the same problem try it in windows 8 and connect your phone after hitting the download firmware button. it will detect your phone.
I tried to downgrade the kitkat version because I couldn't update my apps, using a flash tool.
It then shut down and now does not turn on at all. When I plug into the computer the USB gets into a cycle/loop of connect and disconnect. Please help me if you have the time.
lenover9000 said:
I tried to downgrade the kitkat version because I couldn't update my apps, using a flash tool.
It then shut down and now does not turn on at all. When I plug into the computer the USB gets into a cycle/loop of connect and disconnect. Please help me if you have the time.
Click to expand...
Click to collapse
Does it vibrates or display anything?
Tyaginator said:
Does it vibrates or display anything?
Click to expand...
Click to collapse
no. But I think it goes on '''META MODE'" ONLY on the computer for a few seconds.
Thanks for commenting.
Check device manager in your pc when you connect your phone, is it showing MTK 65xx preloader
Tyaginator said:
Check device manager in your pc when you connect your phone, is it showing MTK 65xx preloader
Click to expand...
Click to collapse
It shows Mediatek preloader usb vcom port (com7) alternating with mtk usb port (com6).
lenover9000 said:
It shows Mediatek preloader usb vcom port (com7) alternating with mtk usb port (com6).
Click to expand...
Click to collapse
U must have flashed some other device's firmware and which guide u have followed
Tyaginator said:
U must have flashed some other device's firmware and which guide u have followed
Click to expand...
Click to collapse
I used this one.
forums (dot) lenovo (dot) com/t5/A-and-P-Series/Lenovo-A536-stuck-during-firmware-upgrade/td-p/1744571[/url]
I downloaded the latest firmware from
"THIS is the latest original ROW firmware (PC Flash Tool installation)"
This whole guide was fine, it worked for me.
But the problem was when I tried to downgrade the firmware to an older version.
I tried to replace the lastest official firmware with this one ROM Android 4.4.2 (older official needrom(dot)com/download/lenovo-a536/
sorry can't link websites yet
http://forum.xda-developers.com/showthread.php?t=1943442
Try this thread
Tyaginator said:
http://forum.xda-developers.com/showthread.php?t=1943442
Try this thread
Click to expand...
Click to collapse
Thank you so much for staying with me to solve this problem. The phone is fixed.
I followed the
"
For MT6575/ 77
With the battery out, hold the volume up, don't let go & plug in the USB cable will activate META mode for few seconds...Typically, you need to click Download at SP Flash Tool before entering META mode or it will auto disconnected...
"
except I downloaded the lenovo a536 stock rom.
the only thing I did different was that I plugged in (META MODE) and THEN pressed download or else the usb would never be detected (they both show different COM numerals.)
After that I firmly held the whole usb into the phone during the whole flashing, or else it might get automatically disconnected again.
Then I updated/upgraded to the latest firmware, And it is all optimal. :good:
THANKS AGAIN !!!
lenover9000 said:
Thank you so much for staying with me to solve this problem. The phone is fixed.
I followed the
"
For MT6575/ 77
With the battery out, hold the volume up, don't let go & plug in the USB cable will activate META mode for few seconds...Typically, you need to click Download at SP Flash Tool before entering META mode or it will auto disconnected...
"
except I downloaded the lenovo a536 stock rom.
the only thing I did different was that I plugged in (META MODE) and THEN pressed download or else the usb would never be detected (they both show different COM numerals.)
After that I firmly held the whole usb into the phone during the whole flashing, or else it might get automatically disconnected again.
Then I updated/upgraded to the latest firmware, And it is all optimal. :good:
THANKS AGAIN !!!
Click to expand...
Click to collapse
Glad it's fixed
I Too Need help my lenovo a536 is bricked
My phone is not booting , unable to install USB VCOM Drivers and it is constantly going off while installing and unable to install driver ,phone vibrates shows logo but it goes in bootloop pls help urgent:crying:
prathamsd4 said:
My phone is not booting , unable to install USB VCOM Drivers and it is constantly going off while installing and unable to install driver ,phone vibrates shows logo but it goes in bootloop pls help urgent:crying:
Click to expand...
Click to collapse
What do u mean by "it is constantly going off while installing"
Does it boot in recovery mode? Please be as specific as you can while posting questions.
Sent from a Device using an App!
Tyaginator said:
What do u mean by "it is constantly going off while installing"
Does it boot in recovery mode? Please be as specific as you can while posting questions.
Sent from a Device using an App!
Click to expand...
Click to collapse
it does not boot in recovery mode,
while trying to install mediatek usb vcom drivers phone constantly connects and disconnect and i am unable to install drivers..
prathamsd4 said:
it does not boot in recovery mode,
while trying to install mediatek usb vcom drivers phone constantly connects and disconnect and i am unable to install drivers..
Click to expand...
Click to collapse
I don't think you need to connect phone during installing drivers and phone will stay connected after properly installing DA Vcom drivers
Sent from a Device using an App!
I have similar problem
Hi, please I need your help. I tried to flash stock ROM but I hard bricked my phone. When I connect phone with computer I'm holding volume up button. In device manager it shows "MediaTek USB Port (COM4)" but after three seconds it disconnect. This is why I can't flash ROM. It's everytime disconnect after three seconds.. Please help me.
Lenovo A536
Please help me guys, where is GND and COLO point of lenovo a536
same problem
i have a lenovo a536 and when i flash the stock
it goes to a cycle of off and on , help me to fix this
ive tried a lot of stock roms i searched,and none of them worked , the cycle of turning off and on is still there
hello guys, i have a problem with my lenovo A850i.
after flashing, my phone cannot on, i check my battery and its still in good condition, i try to flashing one again using SP flash tool, and now my phone were not detect by pc, the led will light up when i remove the battery when it connect to usb, but when i put back the battery,the light will close. i connect to usb and try mane button combination , but still not work...
i have been stuck with this about 3 day, i hope someone can help me..
Sorry for my broken englosh...
What did you flash exactly? You sure you flashed something that's specifically made for your phone ?
Also what combination have you tried yet.
Download another stock rom for your phone load scatter text ,click download and connect your phone to PC via USB while holding the vol+button only
northwindtrades said:
What did you flash exactly? You sure you flashed something that's specifically made for your phone ?
Also what combination have you tried yet.
Download another stock rom for your phone load scatter text ,click download and connect your phone to PC via USB while holding the vol+button only
Click to expand...
Click to collapse
Yes sir, im very sure that i flash lenovo A850i firmware, do u have any other combination for me to try to make my phone connected to pc, i have try holding vol+ button while connect to pc via usb, but it not work, all i have now just a red led light that turn on without battery
jimbo94 said:
Yes sir, im very sure that i flash lenovo A850i firmware, do u have any other combination for me to try to make my phone connected to pc, i have try holding vol+ button while connect to pc via usb, but it not work, all i have now just a red led light that turn on without battery
Click to expand...
Click to collapse
Meta mode( usually vol+ button) is the most successful way of of recovering from a hardbrick for lenovo but after looking up your device you guys coonect meta mode dffrntly.now this is the most successful way of unbricking your phone
pick the official ROM for A850i came with A850_203 multilanguage firmware.
You'll need MTK 65XX metamode driver – USB VCOM Preloader driver, if you previously installed then there is no need.
SP Flash Tool to download the firmware to the phone.
(Make sure you have a working version as some so tool don't work as they're supposed to into ,I'm using version 5.1)
Run SP-Flash Tool, map the scatter loading MTK6582 for your firmware, normally inside the firmware folder. It will mapped the necessary file and partition for your device, After that click Download and leave it searching for device, it will start flash when found the device,
so next we need to activate back the dead phone of Meta mode USB Vcom MTK65xx , firstly remove the battery, simply press and hold VOLUME UP & DOWN + Power Button simultaneously while reinsert USB that connect the phone to PC.
The previous SP Flash that searching for device will start the download process just after the META mode activated, if you failed then try repeat the step :fingers-crossed:
And hit the thumps up button if this post has been helpfull good luck:good:
northwindtrades said:
Meta mode( usually vol+ button) is the most successful way of of recovering from a hardbrick for lenovo but after looking up your device you guys coonect meta mode dffrntly.now this is the most successful way of unbricking your phone
pick the official ROM for A850i came with A850_203 multilanguage firmware.
You'll need MTK 65XX metamode driver – USB VCOM Preloader driver, if you previously installed then there is no need.
SP Flash Tool to download the firmware to the phone.
(Make sure you have a working version as some so tool don't work as they're supposed to into ,I'm using version 5.1)
Run SP-Flash Tool, map the scatter loading MTK6582 for your firmware, normally inside the firmware folder. It will mapped the necessary file and partition for your device, After that click Download and leave it searching for device, it will start flash when found the device,
so next we need to activate back the dead phone of Meta mode USB Vcom MTK65xx , firstly remove the battery, simply press and hold VOLUME UP & DOWN + Power Button simultaneously while reinsert USB that connect the phone to PC.
The previous SP Flash that searching for device will start the download process just after the META mode activated, if you failed then try repeat the step :fingers-crossed:
And hit the thumps up button if this post has been helpfull good luck:good:
Click to expand...
Click to collapse
Okay, i will try it first
Hi guys. I come here in search for help as I already tried possibly all the methods and unbrick solutions that I saw to fix my Oneplus One. Basically when I turn it on it gets stuck on "1+ powered by android" screen. I can't go to Recovery Mode and I can only enter the Fastboot mode if I'm not connected to PC. It doesn't get recognized when I connect it to PC unless I press the "Vol. up + Power" button combination. After this, it gets recognized on windows' device manager as "Qualcomm HS-USB QDLoader 9008" and the phone gets in a mode that doesn't show anything on the screen and apparently necessary to do what's described in this post. This was the last thing that I've tried after I tried several other solutions.
Thanks in advance to anyone who might help me. I love this phone and I hate just the thought of buying a new one.
Twody said:
Hi guys. I come here in search for help as I already tried possibly all the methods and unbrick solutions that I saw to fix my Oneplus One. Basically when I turn it on it gets stuck on "1+ powered by android" screen. I can't go to Recovery Mode and I can only enter the Fastboot mode if I'm not connected to PC. It doesn't get recognized when I connect it to PC unless I press the "Vol. up + Power" button combination. After this, it gets recognized on windows' device manager as "Qualcomm HS-USB QDLoader 9008" and the phone gets in a mode that doesn't show anything on the screen and apparently necessary to do what's described in this post. This was the last thing that I've tried after I tried several other solutions.
Thanks in advance to anyone who might help me. I love this phone and I hate just the thought of buying a new one.
Click to expand...
Click to collapse
Why not just enter into fastboot,install fastboot drivers in pc and connect device in fastboot mode to pc and flash cos13?
Mr.Ak said:
Why not just enter into fastboot,install fastboot drivers in pc and connect device in fastboot mode to pc and flash cos13?
Click to expand...
Click to collapse
I already intalled fastboot drivers and put the phone in fastboot mode. When I plug the phone to the PC it doesn't get recognized. Can you tell me how to install the fastboot drivers? Maybe I missed something.
Twody said:
I already intalled fastboot drivers and put the phone in fastboot mode. When I plug the phone to the PC it doesn't get recognized. Can you tell me how to install the fastboot drivers? Maybe I missed something.
Click to expand...
Click to collapse
https://forum.xda-developers.com/showthread.php?t=2588979
Which windows you're using?
Mr.Ak said:
https://forum.xda-developers.com/showthread.php?t=2588979
Which windows you're using?
Click to expand...
Click to collapse
Yes, that was the one I installed. I'm using windows 10 x64.
Twody said:
Yes, that was the one I installed. I'm using windows 10 x64.
Click to expand...
Click to collapse
Try using win7.
PS: did you launched the tool with administrator privileges?
I download the latest adb and fastboot drivers from Android Studio site under command line tools.
Here is a good Article on how to configure the drivers on your machine.https://www.xda-developers.com/adb-fastboot-any-directory-windows-linux/
Need help. I was using Miracle Box to flash stock ROM, I don't know how but the phone (Micromax E453) is bricked now. I tried to start phone in Meta Mode (swiched off phone connected to PC by holding volume up button), it worked once, then following some tutorials I uninstalled (and checked, Delete the driver software for this device) MTK USB COM driver under port. Since then phone is not turning on and PC is not recognizing the device. Tired changing the USB cable and even tried it on another laptop, but no go. Kindly share what else I can try. PC has Windows 10 64 bit and MTK preloader vcom driver always has yellow exclamation mark (always installs with error code 10). I have disabled driver signature verificiation.
vnandwana said:
Need help. I was using Miracle Box to flash stock ROM, I don't know how but the phone (Micromax E453) is bricked now. I tried to start phone in Meta Mode (swiched off phone connected to PC by holding volume up button), it worked once, then following some tutorials I uninstalled (and checked, Delete the driver software for this device) MTK USB COM driver under port. Since then phone is not turning on and PC is not recognizing the device. Tired changing the USB cable and even tried it on another laptop, but no go. Kindly share what else I can try. PC has Windows 10 64 bit and MTK preloader vcom driver always has yellow exclamation mark (always installs with error code 10). I have disabled driver signature verificiation.
Click to expand...
Click to collapse
Did you have USB debugging enabled in the device's system settings before it got bricked? If not, you might not get it to connect via USB and be recognized.
Sent from my SM-S767VL using Tapatalk
Droidriven said:
Did you have USB debugging enabled in the device's system settings before it got bricked? If not, you might not get it to connect via USB and be recognized.
Sent from my SM-S767VL using Tapatalk
Click to expand...
Click to collapse
Thank you for your response. Yes, USB debugging was enabled before it got bricked. I was able to successfully see my device when I ran adb -devices command. I was also able to run fastboot commands. Now its completely dead.