Database Info

[Q] Stock custom rom

Hi guys i have a blu studio 5.5 D610a stuck at the boot screen logo i have no CWM recovery installed just custom <3e> recovery i tried installing from zip and the installation aborts even in sideload it aborts when trying to install any help what can i do to get pass boot loop

Try to flash CWM recovery in it this is the only way! and be carefull dont do any wrong step otherwise u will lose your phone ..
Sent from my A2 using Tapatalk 2

[Q] My device went bootloop!!!! stuck at boot screen!!

GUYS PLZZ HELP ME IN THIS.....IAM TIRED OF SEARCHING GOOGLE FOR SOLUTIONS AND LAST CAME UP HERE!!
so for tweaking my graphics in my mobile micromax mad a94 i installed a fukin app called "Chain Fire 3d". then it told to installe d drivers and rebooted.... after rebooting my deive was stuck at BOOT LOGO .
I TRIED TO INSTALL STOCK ROM BY Brcm_MultiDownloader_1450 SOFTWARE AND I FLASHED D ROM.....BUT AGAIN THE PROBLEM STILL OCCURS!!! STUCK AT BOOT LOGO!
I ALSO TRIED BY UNINSTALLING CHAINFIRE 3D BY ADB COMMANDS ...BUT WHEN ENTERING ADB SHELL COMMAND I GOT "ERROR: CLOSED"....AND ALSO TRIED INSTALLING STOCK ROM BY FASTBOOT BUT ALSO FAILED THERE
MAIN PART COME HERE ...PLZZ SEE PPL ..BEG U!!!!
I WENT TO FLASH STOCK ROM VIA RECOVERY MOD BY INSTALLING PACKAGE FROM SD CARD
AND AFTER SOME SECONDS IT SHOWED"INSTALLATION ABORTED"
ALSO TRIED TO INSTALL BOOT.IMG OF MY DEVICE AGAIN BUT THERE ALSO IT GAVE "INSTALLATION ABORTED"
NOW WHATEVER I FLASH IT GIVES INSTALLATION ABORTED....AND NOW ....IN RECOVERY MOD I CANNOT CHOOSE FILE FROM SD CARD ALTHOUGH MY MEMMORY CARD IS PROPER !!1
I CANT INSTALL ANYTHING FROM INSTALLATION PACAKGE!!1
SO GUYS IAM BEGGING U ..HELP ME IN THIS.... HARDLY 1 MONTH OVER ...SEARCHING NOW ALSO....
PLZZZ GUYS!!!

From what you've explained, seems your phone is running on stock recovery and not custom, that would explain the installation aborted error, else, you're flashing files either in the wrong format or improperly downloaded/copied
The solution is to flash the system.img from stock backup and your phone will be back up.
I need you to clear something up. you said
"I TRIED TO INSTALL STOCK ROM BY Brcm_MultiDownloader_1450 SOFTWARE AND I FLASHED D ROM.....BUT AGAIN THE PROBLEM STILL OCCURS!!! STUCK AT BOOT LOGO!"
How exactly did you flash it?

Hovatek said:
From what you've explained, seems your phone is running on stock recovery and not custom, that would explain the installation aborted error, else, you're flashing files either in the wrong format or improperly downloaded/copied
The solution is to flash the system.img from stock backup and your phone will be back up.
I need you to clear something up. you said
"I TRIED TO INSTALL STOCK ROM BY Brcm_MultiDownloader_1450 SOFTWARE AND I FLASHED D ROM.....BUT AGAIN THE PROBLEM STILL OCCURS!!! STUCK AT BOOT LOGO!"
How exactly did you flash it?
Click to expand...
Click to collapse
I flashed d stock rom by software called brcm multidownloader tool.....
when i was flashing percentage of completeion was there and at last it showed OK IN green colour.
And i tried installing CWM recovery.img to my mob...but there also installation aborted...... plzz help me bro....

varungr said:
I flashed d stock rom by software called brcm multidownloader tool.....
when i was flashing percentage of completeion was there and at last it showed OK IN green colour.
And i tried installing CWM recovery.img to my mob...but there also installation aborted...... plzz help me bro....
Click to expand...
Click to collapse
if you flashed the stock ROM and flashing was successful, its only logical to say your phone should be in good condition now. am I missing something?

Hovatek said:
if you flashed the stock ROM and flashing was successful, its only logical to say your phone should be in good condition now. am I missing something?
Click to expand...
Click to collapse
Yes i flashed d stock rom by brcm software and after 100% i was told to remove usb cable and then my phone restarted ...now also phone stuck in boot screen only..
today i installed cwm recovery and there i cant mount system ot sd card...not even anything..
if i flash using ad package ...after 100% it gives installation aborted...
what shld i do???

varungr said:
Yes i flashed d stock rom by brcm software and after 100% i was told to remove usb cable and then my phone restarted ...now also phone stuck in boot screen only..
today i installed cwm recovery and there i cant mount system ot sd card...not even anything..
if i flash using ad package ...after 100% it gives installation aborted...
what shld i do???
Click to expand...
Click to collapse
So did you find any solution bro... Facing the same problem.. Tired of Googling.. Used Every method like adb,fastboot but cannot get further...

Stucked in CWm bootloop Micromax mad a94
Can any one help me to fix this crap cwm bootloop on my mad a94.Whenever I turn on my phone it goes into the cwm screen .I hd tried to wipe data, dalvic cache.mount sd, system etc but it doesnt work plZ help me!!

varungr said:
GUYS PLZZ HELP ME IN THIS.....IAM TIRED OF SEARCHING GOOGLE FOR SOLUTIONS AND LAST CAME UP HERE!!
so for tweaking my graphics in my mobile micromax mad a94 i installed a fukin app called "Chain Fire 3d". then it told to installe d drivers and rebooted.... after rebooting my deive was stuck at BOOT LOGO .
I TRIED TO INSTALL STOCK ROM BY Brcm_MultiDownloader_1450 SOFTWARE AND I FLASHED D ROM.....BUT AGAIN THE PROBLEM STILL OCCURS!!! STUCK AT BOOT LOGO!
I ALSO TRIED BY UNINSTALLING CHAINFIRE 3D BY ADB COMMANDS ...BUT WHEN ENTERING ADB SHELL COMMAND I GOT "ERROR: CLOSED"....AND ALSO TRIED INSTALLING STOCK ROM BY FASTBOOT BUT ALSO FAILED THERE
MAIN PART COME HERE ...PLZZ SEE PPL ..BEG U!!!!
I WENT TO FLASH STOCK ROM VIA RECOVERY MOD BY INSTALLING PACKAGE FROM SD CARD
AND AFTER SOME SECONDS IT SHOWED"INSTALLATION ABORTED"
ALSO TRIED TO INSTALL BOOT.IMG OF MY DEVICE AGAIN BUT THERE ALSO IT GAVE "INSTALLATION ABORTED"
NOW WHATEVER I FLASH IT GIVES INSTALLATION ABORTED....AND NOW ....IN RECOVERY MOD I CANNOT CHOOSE FILE FROM SD CARD ALTHOUGH MY MEMMORY CARD IS PROPER !!1
I CANT INSTALL ANYTHING FROM INSTALLATION PACAKGE!!1
SO GUYS IAM BEGGING U ..HELP ME IN THIS.... HARDLY 1 MONTH OVER ...SEARCHING NOW ALSO....
PLZZZ GUYS!!!
Click to expand...
Click to collapse
Do the following
Go to the recovery mode
Select advance and wipe dalvik cache
Return to main menu and wipe data factory reset
And wipe cache partition
That's it. Reboot phone
Hit thanks

varungr said:
GUYS PLZZ HELP ME IN THIS.....IAM TIRED OF SEARCHING GOOGLE FOR SOLUTIONS AND LAST CAME UP HERE!!
so for tweaking my graphics in my mobile micromax mad a94 i installed a fukin app called "Chain Fire 3d". then it told to installe d drivers and rebooted.... after rebooting my deive was stuck at BOOT LOGO .
I TRIED TO INSTALL STOCK ROM BY Brcm_MultiDownloader_1450 SOFTWARE AND I FLASHED D ROM.....BUT AGAIN THE PROBLEM STILL OCCURS!!! STUCK AT BOOT LOGO!
I ALSO TRIED BY UNINSTALLING CHAINFIRE 3D BY ADB COMMANDS ...BUT WHEN ENTERING ADB SHELL COMMAND I GOT "ERROR: CLOSED"....AND ALSO TRIED INSTALLING STOCK ROM BY FASTBOOT BUT ALSO FAILED THERE
MAIN PART COME HERE ...PLZZ SEE PPL ..BEG U!!!!
I WENT TO FLASH STOCK ROM VIA RECOVERY MOD BY INSTALLING PACKAGE FROM SD CARD
AND AFTER SOME SECONDS IT SHOWED"INSTALLATION ABORTED"
ALSO TRIED TO INSTALL BOOT.IMG OF MY DEVICE AGAIN BUT THERE ALSO IT GAVE "INSTALLATION ABORTED"
NOW WHATEVER I FLASH IT GIVES INSTALLATION ABORTED....AND NOW ....IN RECOVERY MOD I CANNOT CHOOSE FILE FROM SD CARD ALTHOUGH MY MEMMORY CARD IS PROPER !!1
I CANT INSTALL ANYTHING FROM INSTALLATION PACAKGE!!1
SO GUYS IAM BEGGING U ..HELP ME IN THIS.... HARDLY 1 MONTH OVER ...SEARCHING NOW ALSO....
PLZZZ GUYS!!!
Click to expand...
Click to collapse
dude samething happened to me if its because of chainfire then do the following take ur battery out and at the time u insert go to recovery mode micromax recover - power+volume down then from there go to choose a install new zip that is it can be restored only if u have a backup or else try finding a image in google and this must work and if u dont have backup and only idea i can share is clear cache go to advanced clear dalvik cache and reboot ua phone and again take off battery while booting and restart :good:
all the best

Chainfire 3D only support Gingerbread or lower. Not for ics+, try to wipe cache and dalvik,if problem still exists, reflash ur rom

[Completed] [Q] MOTO G(2014) XT1068 Recovery problem

Hi guys,
I have a Moto G2 currently and I have rooted it through KingRoot which was successfully done. After that, I had download the APK of Flash Image GUI and I tried to flash a custom recovery. After that, I tried to boot into recovery but it was showing:
hab check failed for recovery
failed to validate recovery image
Boot up failed
However, I can boot my phone up but it takes way way more time than it usually takes. My Bootloader is locked. I seriously dont know what's happened to my phone. Some plz help me. The phone shows the Motorola logo for few minutes and then turns off for a second and then boots up again and then after 5 minutes it boots up properly. I dont know how to unlock bootloader and all as I have just come from a Samsung S3 which was very easy to root and flash a recovery(thru Odin). I wanted to erase the user data in my phone. I tried thru recovery it didnt happen, i tried thru settings and it just tried to boot to recovery but couldnt and showed the above command. Plz help guys as I want a stock recovery or any other recovery so I can flash a custom ROM. I saw many forums and couldnt find a single problem like this so I came here .

Thanks a lot guys I just had to unlock the boot loader and return to stock 5.0.2 via a windowstool. I had bricked my device trying to install CM12.1 Nightly and the windows tool helped me so much u have know idea.

I can't get my custom recovery screen

I can't access to my custom recovery screen .... I am using micromax A-89 ninja ,,. When i m trying the right combinatins to enter the recovery screen (i.e. power button + vol. Up button ) but i m not able to get into it .,. I used it many times before... And after rooting my device also used the recovery. But i tried to install a custom and i was unsuccessfully in installing any other custom recovery tool. I tried using boot manager to install the custom rom (s5 for A89) but there i was unabe to get into my c.r. screen ., it stucks on logo and automatically reboots my phone again.
Plzzzzzzzz help me .
Is this a soft brick or anything else.... I m able to use my phone perfectly but cant enter the recovery tool.
Help me.

segrecurs said:
I can't access to my custom recovery screen .... I am using micromax A-89 ninja ,,. When i m trying the right combinatins to enter the recovery screen (i.e. power button + vol. Up button ) but i m not able to get into it .,. I used it many times before... And after rooting my device also used the recovery. But i tried to install a custom and i was unsuccessfully in installing any other custom recovery tool. I tried using boot manager to install the custom rom (s5 for A89) but there i was unabe to get into my c.r. screen ., it stucks on logo and automatically reboots my phone again.
Plzzzzzzzz help me .
Is this a soft brick or anything else.... I m able to use my phone perfectly but cant enter the recovery tool.
Help me.
Click to expand...
Click to collapse
I'm a little bit confused on what you've posted but I will try to help. First I need a little bit more detail as did you Install a custom ROM but you were not succesfull and since then you have not been able to get into recovery or did you try to install a custom recovery and were unsuccessful?
If it is the latter then you will need to succesfully flash a recovery (Stock or Custom) in order to enter this section of the device, if it is the first then I would recommend attempting to reflash the devices stock firmware and starting from the beginning as it appears for both of these potential scenarios that the custom recovery is corrupted or is getting stuck when loading a particular section to work.

I didn't understood. Please guide me for my next step. Weather i should go for firmware or to install a cwm.

i tried to install custom recovery on my device

segrecurs said:
i tried to install custom recovery on my device
Click to expand...
Click to collapse
Are you able to boot normally into android OS..or is it just powering off automatically or is it happening when you try to go to recovery
If you can boot normally into android its not a softbrick but you might get one
Follow this thread http://forum.xda-developers.com/showthread.php?p=38110405#post38110405 if you want to install CLOCK WORK MOD RECOVERY using a computer if your phone doesn't boot...? No worries
DONT FORGET TO THANK THE HARDWORKERS

i m sorry to say but my phone just got hard bricked......now it stuck on the boot logo.....
help me
plzzzzzzzzz

NEEED help plzz..
i got my device into bootloop. i am using micromax a 89. i got stuck in boot loop and i cant enter in my stock recovery. is there any other way to get out of this. plz tell me

Question Reset on Samsung logo

I managed to install twrp but the cell phone in the samsung logo was restarted every time, I had to re-flick the stock rom since I was left in an infinite loop, if you could help me I will be very grateful

u need to flash after ur flash twrp
vbmeta​check this link : https://forum.xda-developers.com/t/aosp-11-unofficial-samsung-sm-a125f-twrp.4317131/post-85548663

BryanCp13 said:
I managed to install twrp but the cell phone in the samsung logo was restarted every time, I had to re-flick the stock rom since I was left in an infinite loop, if you could help me I will be very grateful
Click to expand...
Click to collapse
Pre root the stock rom before installing twrp. Because there is no cusom kernel currently to fix that issue for our a12.