I am not able to boot device into flash mode!!! It does not boot into flash mode too when switched off!!! I was able to boot it in fastboot mode using Flashtool and able to flash Extended Stock kernel v6!
But, I cannot use volume up or down button when switched off to boot in flashmode or fastboot mode!
The device is not detected in Device manager when switched off!
I want to revert back to Stock!
The device is not even charging when it is switched off!!! But, when it is powered on it charges!
I am currently using windows 8.1 Pro X64!!! I have installed flashtool drivers also!
Everything works when device is Switched on but, nothing works when it is switched off!!!
Plz Help!
[Help]
Can anybody provide me the charger file in system!?
Plz Confirm that it is present in root directory and no other charger file exists in other folders!!!
Is there a charger file located in /system/bin?????
david pro said:
I am not able to boot device into flash mode!!! It does not boot into flash mode too when switched off!!! I was able to boot it in fastboot mode using Flashtool and able to flash Extended Stock kernel v6!
But, I cannot use volume up or down button when switched off to boot in flashmode or fastboot mode!
The device is not detected in Device manager when switched off!
I want to revert back to Stock!
The device is not even charging when it is switched off!!! But, when it is powered on it charges!
I am currently using windows 8.1 Pro X64!!! I have installed flashtool drivers also!
Everything works when device is Switched on but, nothing works when it is switched off!!!
Plz Help!
Click to expand...
Click to collapse
Flash any kernel any see if the problem still persists. Since you are able to connect in fastboot mode, download any other kernel (preferably phantom v7 if you're on jb or any higher version if on kitkat) and flash it using fastboot.
If your device starts working again then problem was in the kernel.
If you still face the problem look for the charger file, make sure it's there.
Best of luck
Hit thanks if it helped.
abhi007.john said:
Flash any kernel any see if the problem still persists. Since you are able to connect in fastboot mode, download any other kernel (preferably phantom v7 if you're on jb or any higher version if on kitkat) and flash it using fastboot.
If your device starts working again then problem was in the kernel.
If you still face the problem look for the charger file, make sure it's there.
Best of luck
Hit thanks if it helped.
Click to expand...
Click to collapse
I hv already tried flashing the kernel!!!
Plz give me the charger file located in /system/bin!!!!
david pro said:
I hv already tried flashing the kernel!!!
Plz give me the charger file located in /system/bin!!!!
Click to expand...
Click to collapse
I don't find any charger file in /system/bin/
However there's one in the root
I'm attaching it here. Copy it to the root of your device and reboot.
Best of luck
And hit thanks if it worked.
abhi007.john said:
I don't find any charger file in /system/bin/
However there's one in the root
I'm attaching it here. Copy it to the root of your device and reboot.
Best of luck
And hit thanks if it worked.
Click to expand...
Click to collapse
Attachment???
Tell me the permission set also!
david pro said:
Attachment???
Click to expand...
Click to collapse
I'm trying but seems to be some issue. WAIT
Edit: Here is the file. I uploaded it to Dropbox
https://www.dropbox.com/s/2c1x03wa9970oez/charger?dl=0
Hit the thanks button
abhi007.john said:
I'm trying but seems to be some issue. WAIT
Edit: Here is the file. I uploaded it to Dropbox
https://www.dropbox.com/s/2c1x03wa9970oez/charger?dl=0
Hit the thanks button
Click to expand...
Click to collapse
Doesn't work!!!!
Are You on Stock OR Kitkat???
david pro said:
Doesn't work!!!!
Are You on Stock OR Kitkat???
Click to expand...
Click to collapse
Stock JB
.17 firmware
extended stock kernel
abhi007.john said:
Stock JB
.17 firmware
extended stock kernel
Click to expand...
Click to collapse
Can you suggest any other Solution!!?
This thread is a fail, charger file manage how the device charges, flashmode/fastboot resides in TA partition
remove battery, plug usb while holding vol down or up, and then plug battery.
try that
Can anybody give me updater-script for creating a ROM flashabble zip???
david pro said:
Can anybody give me updater-script for creating a ROM flashabble zip???
Click to expand...
Click to collapse
I just went through your post again, and got confused this time
tell your problem exactly
can you enter fastboot using volume power button??
abhi007.john said:
I just went through your post again, and got confused this time
tell your problem exactly
can you enter fastboot using volume power button??
Click to expand...
Click to collapse
Nope!!!
I was not able to!!!
But, I have fixed that problem now!!!
Related
So, I tried to install the unlocked bootloader BEFORE I upgraded to the ICS Leak, now I'm stuck on a green "Acer" screen and its stuck, device doesnt come up for flashboot/adb. :-(
zirrus said:
So, I tried to install the unlocked bootloader BEFORE I upgraded to the ICS Leak, now I'm stuck on a green "Acer" screen and its stuck, device doesnt come up for flashboot/adb. :-(
Click to expand...
Click to collapse
Have you tried resetting it (the little hole at the left corner of the base)?
Actually, I got into fastboot but now I need to get the ICS flashed with fastboot. ANy help?
zirrus said:
Actually, I got into fastboot but now I need to get the ICS flashed with fastboot. ANy help?
Click to expand...
Click to collapse
Place the update.zip on your external sd card.
Wasnt working, got it tho. Installed CWM, flashed it. (After it took me awhile to figure out the CWM Recovery buttons :-/ ) Thanks for the help anyway.
zirrus said:
Wasnt working, got it tho. Installed CWM, flashed it. (After it took me awhile to figure out the CWM Recovery buttons :-/ ) Thanks for the help anyway.
Click to expand...
Click to collapse
You installed CWM before you flashed it?
Used fastboot to flash the CWM recovery.img then flashed the ICS leak update.zip from the sdcard, I couldn't get it to flash the update.zip without CWM for some reason
zirrus said:
Used fastboot to flash the CWM recovery.img then flashed the ICS leak update.zip from the sdcard, I couldn't get it to flash the update.zip without CWM for some reason
Click to expand...
Click to collapse
So that means the process for unlocking the bootloader for ICS works on HC. Great find (although you almost ended up with a paperweight ).
i did the same as the OP and I've tried the reset button and it doesn't seem to want to work.
Any help would be appreciated.
KANGED AOKP Showcase
Virtuous Prime ATP
JustinFields95 said:
Any help would be appreciated.
KANGED AOKP Showcase
Virtuous Prime ATP
Click to expand...
Click to collapse
have you tried this
http://www.youtube.com/watch?v=vTcBoSHqrPc&feature=relmfu
That doesn't work either. Thanks for the idea. I think my tablet is hard-bricked.
Sent from my SCH-I500 using XDA Premium HD app
Try to enter in fastboot mode. Try to hold Vol UP while powering on.
Send from my A100
zleto said:
Try to enter in fastboot mode. Try to hold Vol UP while powering on.
Send from my A100
Click to expand...
Click to collapse
Tried several times. Didn't work.
Sent from my EPAD using XDA Premium HD app
His only hope is to enter fastboot and other recovery and try to install from a flash update.zip ay or else a cooked rom
Somewhat Of a similar issue
I am stuck at the distorted green acer logo when the tablet tries to boot but I get nothing after that...
I can reboot and enter CWM but it seems nothing is mounting, the external nor internal files/folders seem to not want to mount but I get on CWM juss fine
What should I do?
take a look
http://www.htcmania.com/showthread.php?t=373834
peporras said:
take a look
http://www.htcmania.com/showthread.php?t=373834
Click to expand...
Click to collapse
I can get into APX mode but no fastboot. And as you know you need the CPU ID to get through EUUs, I'm not sure how to get the CPU ID number.
Hello, I have a similar problem, I can enter in APX mode, I have CPUID and I have SBK key but I can not do anything because give me a error like...:can not write to usb....
any idea please?
Pustiu314p said:
Hello, I have a similar problem, I can enter in APX mode, I have CPUID and I have SBK key but I can not do anything because give me a error like...:can not write to usb....
any idea please?
Click to expand...
Click to collapse
Can I ask how you got the SBK? That's not available for the A100. The method used for the A500 doesn't work on the A100 bootloader either. If the device is stuck in APX mode then it's bricked and will need to be sent to Acer for repair or a motherboard replacement will need done by yourself or someone you take it to.
and nothing I do get's it to go away. I have spent the better part of 8 hours screwing around with it and can't figure it out. Here is what I know:
If you just try and turn on the phone sans power cord, it won't turn on. If you plug it it, it displays the LG screen and stops. If you hold down the power, down, home keys, then power cable, it will boot into fastboot and take fastboot commands. I have followed the procedure to flash a recovery image listed here in the forums to no avail. It will erase the recovery, flash it, but will not reboot on the reboot command. When I disconnect the data cable and reconnect, it will go right back to the LG screen. I have tried KDZ and downloaded the original rom via the Original LG Firmware tool. It will communicate with the phone if I put the phone in emergency mode via the simultaneous back and volume down button while connecting the power cable. KDZ will start to install the rom but after some time, the phone spontaneously reboots and then hangs at the LG screen. Upon reboot back into emergency, the KDZ routine finishes and says it's finished but when I reboot it goes right back to the LG screen. I have tried the kdz tool in diag and emergency modes while shaking the phone. I have tried the software update tool but it says it cant communicate properly with the phone. I don't know what else to try.
Any suggestions?
Thanks a bunch!
After you succesfully flashed the recovery using fastboot, do you try to boot into recovery manually?
If that doesn't works you could try this http://forum.xda-developers.com/showthread.php?t=1827723
gabo_lope said:
After you succesfully flashed the recovery using fastboot, do you try to boot into recovery manually?
If that doesn't works you could try this http://forum.xda-developers.com/showthread.php?t=1827723
Click to expand...
Click to collapse
By recovery do you mean clockworkmod? If so, the phone is stock, unrooted so no, if not, what do you mean and how do I do that?
Thanks a bunch!
PS, If I follow the method I found for entering recovery it goes right back to fastboot.
PS Part two, the app you link did the same thing as I did manually and did not help.... thanks anyway...
J
Check if this thread helps...
forum.xda-developers.com/showthread.php?t=1827723
ROM - Paranoid Android By ByteCode.
Sent via XDA App.
"Hit ThanX if i helped u by anyway !"
jackler1 said:
By recovery do you mean clockworkmod? If so, the phone is stock, unrooted so .......
Click to expand...
Click to collapse
Hey jackler1, it will not allow you to install any custom recovery if your phone is still not rooted as you mentioned.
Hence using the Home+Vol-+power combo takes you to the fast boot screen.
1st thing you need to do is to root the phone, for it to allow installation of a custom recovery.
Many root tools are available for the P500 - eg Gingerbreak, Super one click.
try this for rooting - http://forum.xda-developers.com/showthread.php?t=1832485
pmvyas said:
Hey jackler1, it will not allow you to install any custom recovery if your phone is still not rooted as you mentioned.
Hence using the Home+Vol-+power combo takes you to the fast boot screen.
1st thing you need to do is to root the phone, for it to allow installation of a custom recovery.
Many root tools are available for the P500 - eg Gingerbreak, Super one click.
try this for rooting - http://forum.xda-developers.com/showthread.php?t=1832485
Click to expand...
Click to collapse
Hey,
I am unable to get into any other mode but fastboot or emercency mode so I have no idea how to root the thing. The thread you mention is of no help, thanks anyway and will take suggestions if you have them
DpAk007 said:
Check if this thread helps...
forum.xda-developers.com/showthread.php?t=1827723
ROM - Paranoid Android By ByteCode.
Sent via XDA App.
"Hit ThanX if i helped u by anyway !"
Click to expand...
Click to collapse
I had already attempted this method as well to no avail, thanks anyway!
Hello,
I was trying to install CM10 mod.Everything worked fine but I misjudged something.We had to place .zip file itself but I extracted it and then wiped all data and cache.Now I am unable to place it again.I don't know how to place the zip file in sdcard again.Please help me urgently...
Thanks,
Centurian
If you can enter cwm, mount USB, then use this app to push file to /sdcard
http://forum.xda-developers.com/showthread.php?t=1599332
Sent from my ST27i
that worked now...I sent the zip file to sdcard but now while flashing it aborts everytime....Error Status 7 comes...
Please suggest something..
Thanks
Mr.Centurian said:
that worked now...I sent the zip file to sdcard but now while flashing it aborts everytime....Error Status 7 comes...
Please suggest something..
Thanks
Click to expand...
Click to collapse
Ya happened to me too reboot into recovery, try again, if not working reboot recovery again or battery pull and enter recovery, it worked after a couple of tries for me.
Sent from my ST27i
Hey,It flashed now..I did from FXP152 tapioca...
But now,when rebooting it there is no reponse...The screen is completely dead,no response from anything...What should I do next??
Mr.Centurian said:
Hey,It flashed now..I did from FXP152 tapioca...
But now,when rebooting it there is no reponse...The screen is completely dead,no response from anything...What should I do next??
Click to expand...
Click to collapse
Oh dude are you serious? Why aren't you following the development thread (or even this q&a section) ?
It's been told way too many times fxp152 boot.img is bugged and not bootable
Now download fxp 203 ( or 204 but better leave testing to others and read bugs before flashing)
Fastboot 203 boot.img and same instructions as above.
Sent from my ST27i
But my phone is blacked out...no response...What should I do first to make it working to recovery mode??
It can still enter fastboot mode. Power + vol up when phone is switched off. Or remove battery, open flashtool on pc, press vol up and plug USB
Sent from my ST27i
thankss....it worked!!!
thanks alot
Hello,
By flashing thunderzap kernal(Stable version) on my Xperia L, I installed the latest version of Cyanogemode 11(toashan) and there by the firmware was running butter smooth without any problem, now I tried to revert the firmware with stock Rom and I understood that the best way to install stock rom is to flash it via flashtool.The problem what I am facing is after entering in flash mode, the flashtool widget gets stuck at "flashing loader".the percent is stuck at 0%.The confusion comes into play as the phone never shows signs that it is in flash mode.i tried flashing another kernal still the same old problem.
Thanks
Hazil
Sent from my C2104 using XDA Free mobile app
hazil33 said:
Hello,
By flashing thunderzap kernal(Stable version) on my Xperia L, I installed the latest version of Cyanogemode 11(toashan) and there by the firmware was running butter smooth without any problem, now I tried to revert the firmware with stock Rom and I understood that the best way to install stock rom is to flash it via flashtool.The problem what I am facing is after entering in flash mode, the flashtool widget gets stuck at "flashing loader".the percent is stuck at 0%.The confusion comes into play as the phone never shows signs that it is in flash mode.i tried flashing another kernal still the same old problem.
Thanks
Hazil
Sent from my C2104 using XDA Free mobile app
Click to expand...
Click to collapse
Flashing a custom kernel has nothing to do with a stock ftf.
Can you tell the steps that you're following to flash stock?
Reply
abhi007.john said:
Flashing a custom kernel has nothing to do with a stock ftf.
Can you tell the steps that you're following to flash stock?
Click to expand...
Click to collapse
1. Turn off the phone and let it rest for 30 sec and did the below tasks.
2.Copied the stock ftf, C2104_15.3.A.1.17_Generic into the firmware folder of flashtool,clicked the flash mode button in flashtool and waited for the prompt to plug in my phone holding the back button connecting the usb cable.
3.Now i saw a pop up in my pc(windows 7) saying that the device is connected in flash mode.
4.Now the flashtool prompt goes when i connected the device, and it gets stuck at the notification saying "flashing loader" and its at 0%.
This the issue which i am facing right now. I cant flash stock rom and get back to 4.2 :'(
hazil33 said:
1. Turn off the phone and let it rest for 30 sec and did the below tasks.
2.Copied the stock ftf, C2104_15.3.A.1.17_Generic into the firmware folder of flashtool,clicked the flash mode button in flashtool and waited for the prompt to plug in my phone holding the back button connecting the usb cable.
3.Now i saw a pop up in my pc(windows 7) saying that the device is connected in flash mode.
4.Now the flashtool prompt goes when i connected the device, and it gets stuck at the notification saying "flashing loader" and its at 0%.
This the issue which i am facing right now. I cant flash stock rom and get back to 4.2 :'(
Click to expand...
Click to collapse
How could you hold the 'back' button???
there's no such button as far as I know.
Anyways since you're able to connect in flashmode I assume that you're talking about the volume down button. Try changing the firmware(ftf). Instead of generic, try any other version. And run flashtool as administrator.
Best of luck
Hit thanks if it helped
Reply
abhi007.john said:
How could you hold the 'back' button???
there's no such button as far as I know.
Anyways since you're able to connect in flashmode I assume that you're talking about the volume down button. Try changing the firmware(ftf). Instead of generic, try any other version. And run flashtool as administrator.
Best of luck
Hit thanks if it helped
Click to expand...
Click to collapse
Sorry bro, its the vol down button which i am talking about
Reply
abhi007.john said:
How could you hold the 'back' button???
there's no such button as far as I know.
Anyways since you're able to connect in flashmode I assume that you're talking about the volume down button. Try changing the firmware(ftf). Instead of generic, try any other version. And run flashtool as administrator.
Best of luck
Hit thanks if it helped
Click to expand...
Click to collapse
Hello,
I tried that with another stock ftf file and still things aren't working out :'(
hazil33 said:
Hello,
I tried that with another stock ftf file and still things aren't working out :'(
Click to expand...
Click to collapse
download latest flashtool this one is old
Flashing_Expert said:
download latest flashtool this one is old
Click to expand...
Click to collapse
Issue fixed after updating flashtool
Hello! Unfortunately my mate 7 is bricked! The only thing i can do is to get in bootload mode. I can't get into recovery mode. I also cant install a rom by pressing volume up + volume down + power. Nothing is happening. Only rebooting with the huawei logo.
I try this solutions :
http://www.needrom.com/download/mt7-l09-unbrick-firmware/ and this
http://forum.frandroid.com/topic/215484-unbrick-mate-7-mt7-l09/
but this no success. PLease help me. :crying:
more info. what were you doing that caused the bl? what are you currently running? do you wish to repair or clean install?
droidbot1337 said:
more info. what were you doing that caused the bl? what are you currently running? do you wish to repair or clean install?
Click to expand...
Click to collapse
I do this by trying install the new B511 firmware. I download the update.zip file and I unzip it and try to install the UPDATE.APP I found into the zip file. After that the phone always show the Huawei logo and I can't closed it. The only think I can do is to put it into bootloader mode. I try to boot through fastboot from my pc the SYSTEM.img and RECOVERY.img using a official firmware and the HuaweiUpdateExtractor, but without success. And the 3 button way (Volume up + Volume down + power) not working anymore. And also I can't get in recovery mode. I try with official recovery and with twrp recovey
gthebest said:
hello! Unfortunately my mate 7 is bricked! The only thing i can do is to get in bootload mode. I can't get into recovery mode. I also cant install a rom by pressing volume up + volume down + power. Nothing is happening. Only rebooting with the huawei logo.
I try this solutions :
http://www.needrom.com/download/mt7-l09-unbrick-firmware/ and this
http://forum.frandroid.com/topic/215484-unbrick-mate-7-mt7-l09/
but this no success. Please help me. :crying:
Click to expand...
Click to collapse
which rom firmware version you were in when you try to install 511
mpt123 said:
which rom firmware version you were in when you try to install 511
Click to expand...
Click to collapse
Β326
gthebest said:
Β326
Click to expand...
Click to collapse
i dunno how to flash MM but i think i can help you back to LP. make sure you have stock recovery for LP. if you dont just download mobopx's tool. im currently using B328, so just extract the archive and place the dload folder in either your root or an sdcard. turn off phone, hold volume up & power. hope this helps. btw, installing MM requires more steps including an update to the stock recovery.
If you have already unlock your bootloader you can try 'one-key recovery' method with HiSuite version 4.0 (download it from the official chinese website) this method will restore and flash your ROM and your phone will be OK
smich_ayane said:
If you have already unlock your bootloader you can try 'one-key recovery' method with HiSuite version 4.0 (download it from the official chinese website) this method will restore and flash your ROM and your phone will be OK
Click to expand...
Click to collapse
Please can you send me a link to download it? I make a search at google "HiSuite version 4.0" but I can't find anything
droidbot1337 said:
i dunno how to flash MM but i think i can help you back to LP. make sure you have stock recovery for LP. if you dont just download mobopx's tool. im currently using B328, so just extract the archive and place the dload folder in either your root or an sdcard. turn off phone, hold volume up & power. hope this helps. btw, installing MM requires more steps including an update to the stock recovery.
Click to expand...
Click to collapse
This link don't working
gthebest said:
I do this by trying install the new B511 firmware. I download the update.zip file and I unzip it and try to install the UPDATE.APP I found into the zip file. After that the phone always show the Huawei logo and I can't closed it. The only think I can do is to put it into bootloader mode. I try to boot through fastboot from my pc the SYSTEM.img and RECOVERY.img using a official firmware and the HuaweiUpdateExtractor, but without success. And the 3 button way (Volume up + Volume down + power) not working anymore. And also I can't get in recovery mode. I try with official recovery and with twrp recovey
Click to expand...
Click to collapse
Hi i'm getting the same problem, i tried to update to mm but now i can only access the recovery with vol up and power occasionally. the vol up and down and power doesn't seem to be working for me. as this is my daily driver id appreciate some assistance thanks
gthebest said:
This link don't working
Click to expand...
Click to collapse
sorry about that. here's the link.
mega:///#!llQWQD6S!a0JOjS1ZmCT1aSggvCPYb7lhkPimYtVhja-Mv0qk7DY
Hisuite 4.0 here's hisuite 4.0 hope this will help you
gthebest said:
This link don't working
Click to expand...
Click to collapse
http://download-c.huawei.com/download/downloadCenter?downloadId=69004&version=239974&siteCode=cn
droidbot1337 said:
sorry about that. here's the link.
mega:///#!llQWQD6S!a0JOjS1ZmCT1aSggvCPYb7lhkPimYtVhja-Mv0qk7DY
Click to expand...
Click to collapse
I did the same mistake. I have Access to recovery mode, install mode and so on but everytime I try to install another Rom it stucks at 5% and I get a failure message.
and how can I open your mega link ?
hello my friend.
I am in the same situation as you , try installing mm and the phone went on bootloop and there did not come out , I've tried everything but nothing updates, the EMUI reaches 5% and then says the software install failed, if you given solution to your problem you ask for help in trying to solve this problem.
I thank you in advance.