Does anyone know how to unlock the bootloader on Galaxy S3 or at least downgrade to where I can unlock it. I want to be able to run liquid smooth on my phone. Thanks in advance!!
Sent from my SCH-I535 using XDA Free mobile app
eddyo1993 said:
Does anyone know how to unlock the bootloader on Galaxy S3 or at least downgrade to where I can unlock it. I want to be able to run liquid smooth on my phone. Thanks in advance!!
Sent from my SCH-I535 using XDA Free mobile app
Click to expand...
Click to collapse
It'll be a $50 fee and its done via MobileTechVideos. There is no XDA exploit to unlock the bootloader on 4.3+.
SlimSnoopOS said:
It'll be a $50 fee and its done via MobileTechVideos. There is no XDA exploit to unlock the bootloader on 4.3+.
Click to expand...
Click to collapse
Am I gonna have to send it in and if so how long would it take.
eddyo1993 said:
Am I gonna have to send it in and if so how long would it take.
Click to expand...
Click to collapse
Yes, and a couple weeks.
All the information is available on their website, Google it.
Sent from my HTC6525LVW using Tapatalk
BadUsername said:
Yes, and a couple weeks.
All the information is available on their website, Google it.
Sent from my HTC6525LVW using Tapatalk
Click to expand...
Click to collapse
thanks for the info. Now while looking on the site I ran across JTAG i think and i was wondering what it is. Also, could i install custom ROMS with custom recovery on galaxy S4 without sending it in and without using SafeStrap
eddyo1993 said:
thanks for the info. Now while looking on the site I ran across JTAG i think and i was wondering what it is. Also, could i install custom ROMS with custom recovery on galaxy S4 without sending it in and without using SafeStrap
Click to expand...
Click to collapse
JTAG stands for joint test action group, which is essentially a common IEEE serial port located on the motherboard of many devices. In a phones case, a Riff box is used to access the port and flash device specific files to the motherboard directly, thus eliminating the need for the phone to be on or functioning in the first place.
In this case, the jtag port is used to write to the emmc chip directly to override the system check and flash earlier firmware.
You can on the S4 but you need MDK firmware, you're better off asking in the S4 forum.
Sent from my HTC6525LVW using Tapatalk
BadUsername said:
JTAG stands for joint test action group, which is essentially a common IEEE serial port located on the motherboard of many devices. In a phones case, a Riff box is used to access the port and flash device specific files to the motherboard directly, thus eliminating the need for the phone to be on or functioning in the first place.
In this case, the jtag port is used to write to the emmc chip directly to override the system check and flash earlier firmware.
You can on the S4 but you need MDK firmware, you're better off asking in the S4 forum.
Sent from my HTC6525LVW using Tapatalk
Click to expand...
Click to collapse
Ill look into the s4 forum. So is there anything I could do to run LiquidSmooth ROM on my S3? Also, would it be possible that Verizon unlock it if I ask?
eddyo1993 said:
Ill look into the s4 forum. So is there anything I could do to run LiquidSmooth ROM on my S3? Also, would it be possible that Verizon unlock it if I ask?
Click to expand...
Click to collapse
Only way is by paying $50. Verizon will do no such thing. Verizon only releases sim unlocked phones, Verizon has never provided a bootloader unlock service.
Related
METHOD 1: I purchased an unlock code that wroked first try....
COST $22
I would like to share my experience for those who do not want to get scammed.
IT WILL TAKE 24 hrs AT LEAST with these guys so don't set your pants on fire waiting !!! I have used this site for all my phones.
Send an email [email protected]. Send IMEI and carrier details, country of carrier.
Then use code to unlock. If you need help entering code please post back.
METHOD 2: I HAVE NOT TRIED THIS. BUT There is another method to unlock the phone using a USB hack. This has worked for most people who tried it. It involves running software on your computer to replace the unlock code location via USB with zeros. This method is covered here in more details:
http://forum.xda-developers.com/showthread.php?t=1617999
User experience is also available here: http://forum.xda-developers.com/showthread.php?p=25480419#post25480419
The ebay method seems to work for now. it can run from $15 -$17.
GreetingS!! A noob here what is the benefit of have the phone unlocked? Can I removed the bloatware?
Lakland said:
GreetingS!! A noob here what is the benefit of have the phone unlocked? Can I removed the bloatware?
Click to expand...
Click to collapse
Nope. Unlocked is when you can use it on a carrier other than At&t. With the skyrocket you have to buy an unlock code. Bloatware is removed in custom roms.
Sent from my SAMSUNG-SGH-I727 using xda premium
Lakland said:
GreetingS!! A noob here what is the benefit of have the phone unlocked? Can I removed the bloatware?
Click to expand...
Click to collapse
Welcome !
They are different things. Unlocking is SIM card unlocking that then allows you to use your phone on any GSM network.
Removing bloatware requires "rooting". You get access to system files etc. allowing you to modify the software on there.
This a good starting point for Skyrocket to modify software:
http://forum.xda-developers.com/showthread.php?t=1383464
(If this advice feels good, push the itsty-bitsy thanks button !!!!!!!)
Reputable? Maybe...
Mustn't troll ...... smh
Sent from my SGH-T989 using Tapatalk 2
nrm5110 said:
Mustn't troll ...... smh
Sent from my SGH-T989 using Tapatalk 2
Click to expand...
Click to collapse
Be strong buddy!
icenight89 said:
Reputable? Maybe...
Click to expand...
Click to collapse
Just trust me.
good for you.
I have searched far and wide and cannot find a bootloader unlock method that will work with the Galaxy S3 that has already been updated to official 4.1.2.
The EZ-Unlock app will not work for 4.1.2 (only 4.1.1 and before)
The open1your1eyes0 method that was updated in February 2013 does not work either: http://forum.xda-developers.com/showthread.php?t=1974114
What do I do? Until I get my bootloader unlock I cannot do anything.
Phone is currently Build Number: JZ054K.I535VRBMB1
crobs808 said:
I have searched far and wide and cannot find a bootloader unlock method that will work with the Galaxy S3 that has already been updated to official 4.1.2.
The EZ-Unlock app will not work for 4.1.2 (only 4.1.1 and before)
The open1your1eyes0 method that was updated in February 2013 does not work either: http://forum.xda-developers.com/showthread.php?t=1974114
What do I do? Until I get my bootloader unlock I cannot do anything.
Phone is currently Build Number: JZ054K.I535VRBMB1
Click to expand...
Click to collapse
Try this http://forum.xda-developers.com/showthread.php?t=2046439
buhohitr said:
Try this http://forum.xda-developers.com/showthread.php?t=2046439
Click to expand...
Click to collapse
This is what I used on my phone. I watched the video and read the steps multiple times so I was comfortable.
Sent from my ASUS Transformer Pad TF300T using xda premium
Did that and it didn't work. Had to downgrade to stock 4.1.1 (K3) then use EZUnlock.
Thanks everyone for the input.
crobs808 said:
Did that and it didn't work. Had to downgrade to stock 4.1.1 (K3) then use EZUnlock.
Thanks everyone for the input.
Click to expand...
Click to collapse
crobs, im in the same boat i will let you know if i can make anny progress.
Ezunlock 1.2 is the version that works correctly.
Sent from my SCH-I535 using Tapatalk 2
Sorry to bump such an old post, but does anybody have the Ezunlock apk?
Pachonk said:
Sorry to bump such an old post, but does anybody have the Ezunlock apk?
Click to expand...
Click to collapse
dont use it if youre not on 4.1.2 or earlier. youll hardbrick your phone. its a recoverable hardbrick, but a PITA and unnecessary. What baseband are you on?
Need to unlock
Hi all.
I finally had to do a factory reset on my Verizon GS3. Poor performance and yellow factory mode text floating on screen.
I have obtained root access on the phone, however ODIN3 flashing a recovery image fails. My understanding is that I need the bootloader unlocked for that to work. Is there a reliable way to do that?
Edit: running Android 4.4.2
SCH-535
Thanks,
BigMac
BigMacAttak said:
Hi all.
I finally had to do a factory reset on my Verizon GS3. Poor performance and yellow factory mode text floating on screen.
I have obtained root access on the phone, however ODIN3 flashing a recovery image fails. My understanding is that I need the bootloader unlocked for that to work. Is there a reliable way to do that?
Edit: running Android 4.4.2
SCH-535
Thanks,
BigMac
Click to expand...
Click to collapse
Nope. Vzw are jerks like that
BigMacAttak said:
Hi all.
I finally had to do a factory reset on my Verizon GS3. Poor performance and yellow factory mode text floating on screen.
I have obtained root access on the phone, however ODIN3 flashing a recovery image fails. My understanding is that I need the bootloader unlocked for that to work. Is there a reliable way to do that?
Edit: running Android 4.4.2
SCH-535
Thanks,
BigMac
Click to expand...
Click to collapse
Your bootloader is locked forever, unlocking isn't an option.
If you want anything other than stock you'll have to use Safestrap recovery and modified stock ROMs like everyone else with locked bootloader Verizon S3.
Safestrap is deprecated. At least their site says dev. Has stopped. There's probably a fork of it on github somewhere, but any safestrap you find won't be by the original developer.
Sent from my SM-N900V using Tapatalk
Ohh Im Edgy said:
Safestrap is deprecated. At least their site says dev. Has stopped. There's probably a fork of it on github somewhere, but any safestrap you find won't be by the original developer.
Sent from my SM-N900V using Tapatalk
Click to expand...
Click to collapse
The Verizon users(on many of the Verizon devices) are currently using Safestrap, the Safestrap they need is here in this forum.
Droidriven said:
The Verizon users(on many of the Verizon devices) are currently using Safestrap, the Safestrap they need is here in this forum.
Click to expand...
Click to collapse
Thanks for saying that. I was actually looking for it myself about a month ago after a soft-brick and gave up when I found the info I posted already.
Is it the original dev or is it open source now?
Sent from my Glade Air - Freshener using Tapatalk
Ohh Im Edgy said:
Thanks for saying that. I was actually looking for it myself about a month ago after a soft-brick and gave up when I found the info I posted already.
Is it the original dev or is it open source now?
Sent from my Glade Air - Freshener using Tapatalk
Click to expand...
Click to collapse
I don't know, I use the Verizon S3 ROMs on my device but it isn't a Verizon device, but I spend a lot of time in the Verizon S3 forum, I see new users looking to customize their device all the time.
Here's the download for it
forum.xda-developers.com/devdb/project/?id=2405#downloads
Read this thread though, if you have encrypted your data, it will cause bootloop. Yes, it isn't supported anymore, BUT, the Safestrap still available still works.
forum.xda-developers.com/showthread.php?t=2605648
Does the gsm radio still work or do you use it only on wifi?
Mine is Verizon and I'm on att now, and thought about flashing the stock Att rom but other members on here told me it wouldn't work :s
Sent from my Glade Air - Freshener using Tapatalk
Ohh Im Edgy said:
Does the gsm radio still work or do you use it only on wifi?
Mine is Verizon and I'm on att now, and thought about flashing the stock Att rom but other members on here told me it wouldn't work :s
Sent from my Glade Air - Freshener using Tapatalk
Click to expand...
Click to collapse
I use it on Straight talk, my device is a Straight Talk S3 SCH-S968C that uses Verizon towers, my motherboard is actually stamped with the Verizon SCH-I535 model number, its rebranded as Straight Talk's device. Only difference is they disabled the 4G on the Verizon S3 when Straight Talk rebranded it.
Ohh Im Edgy said:
Does the gsm radio still work or do you use it only on wifi?
Mine is Verizon and I'm on att now, and thought about flashing the stock Att rom but other members on here told me it wouldn't work :s
Sent from my Glade Air - Freshener using Tapatalk
Click to expand...
Click to collapse
No, you can't flash AT&T firmware. That would surely brick your device. You can port the AT&T firmware somewhat easily, they are mostly the same but have different modems and a few other minor differences. I can link you to a thread for porting the US S3 variants.
No that's alright I'm on a note 3 anyway, but I've got a good place to start so thanks!
Sent from my Glade Air - Freshener using Tapatalk
Is 4.3(NC1) locked too?
Not to sure it will help much but it's been posted.
http://opensource.samsung.com/
Sent from my SAMSUNG-SGH-I337 using xda premium
Apply update?
Can I rename this as update.zip and the flash it to my AT&T i337? I am on MDL and it wont update via OTA or Kies.
Thanks
Bucknut89 said:
Can I rename this as update.zip and the flash it to my AT&T i337? I am on MDL and it wont update via OTA or Kies.
Thanks
Click to expand...
Click to collapse
If you're on MDL and want MF3, I recommend rooting and installing a custom recovery while you can, and then flashing the neutered MF3 update. Root is in the General section, many MF3 ROM's can be found in Development sections. Make sure to read the whole OP in whichever you go to before doing anything.
Bucknut89 said:
Can I rename this as update.zip and the flash it to my AT&T i337? I am on MDL and it wont update via OTA or Kies.
Thanks
Click to expand...
Click to collapse
Trolling?
blastagator said:
Trolling?
Click to expand...
Click to collapse
why ask that? believe it or not some xda users never root their phone and could care less about loosing the ability to flash roms
help
I am in need of the stock mf3 firmware. tried getting rid of bloat ware and now getting error messages all over and cant recover
OK...after downloading and extracting...this is only the kernel source...
help
i did just that....but know i get samsung text to speech has stopped as well as music has stopped...factory wipe and clean did nothing as well as restoring terminator back up of all things i uninstalled...nothing help so i figured fresh install of mf3 firmware would do the trick but i guess no one has that yet
DeadlySin9 said:
If you're on MDL and want MF3, I recommend rooting and installing a custom recovery while you can, and then flashing the neutered MF3 update. Root is in the General section, many MF3 ROM's can be found in Development sections. Make sure to read the whole OP in whichever you go to before doing anything.
Click to expand...
Click to collapse
I just really want the update so I can open the extra LTE bands. Also the Apps to SD would be nice. The Rooted roms dont fix the LTE bands. Also i dont care about rooting. Looks like CM is going to be coming out with a non root flash method for thier roms anyway.
You can unlock them... You don't need the update. Google.
Sent from my SGH-I337 using xda premium
graydiggy said:
You can unlock them... You don't need the update. Google.
Sent from my SGH-I337 using xda premium
Click to expand...
Click to collapse
Yes, you may be able to just flash the MF3 modem after a factory reset. That would hopefully resolve your current issues and open up the LTE bands.
Sent from my SAMSUNG-SGH-I337 using Tapatalk 4
The extra bands are unlocked through the service menus. Not through a modem. If that were the case, the update would unlock your device for any GSM carrier. AT&T is not going to do that.
Sent from my SGH-I337 using xda premium
graydiggy said:
The extra bands are unlocked through the service menus. Not through a modem. If that were the case, the update would unlock your device for any GSM carrier. AT&T is not going to do that.
Sent from my SGH-I337 using xda premium
Click to expand...
Click to collapse
But the update did add support for more bands according to some posts ive read here on xda...more bands doesnt mean unlock...just means the possibility of att expanding there lte network with some new bands
Sent from my SAMSUNG-SGH-I337 using Tapatalk 4
graydiggy said:
The extra bands are unlocked through the service menus. Not through a modem. If that were the case, the update would unlock your device for any GSM carrier. AT&T is not going to do that.
Sent from my SGH-I337 using xda premium
Click to expand...
Click to collapse
Yeah AT&T opened up access to lte band 2 and 5 with the mf3 on their modem. Probably for international oversea purposes/partnership?
Sent from my SAMSUNG-SGH-I337 using Tapatalk 2
If you want the MF3 rom and/or kernel, check out this thread. If you want just the modem (baseband), check out the latest addition, File #11 in that same thread.
Otherwise, I think this thread has been hijacked enough, and the original purpose has been served, in my opinion. The MF3 source is practically useless to anyone except Devs that want to build their own kernels.
Aou said:
If you want the MF3 rom and/or kernel, check out this thread. If you want just the modem (baseband), check out the latest addition, File #11 in that same thread.
Otherwise, I think this thread has been hijacked enough, and the original purpose has been served, in my opinion. The MF3 source is practically useless to anyone except Devs that want to build their own kernels.
Click to expand...
Click to collapse
Could the kernel source also be useful to those looking to find an exploit in MF3 (to unlock the bootloader or something to that effect), or is the kernel too high-level for that sort of thing?
ethteck said:
Could the kernel source also be useful to those looking to find an exploit in MF3 (to unlock the bootloader or something to that effect), or is the kernel too high-level for that sort of thing?
Click to expand...
Click to collapse
Pretty sure it's too high level. It might be useful for finding a root exploit, but that's been done already for MF3. It wouldn't be useful for finding a way to unlock the bootloaders, but the only slim help it could find in this area is perhaps providing clues to understanding "aboot" more, and how it checks for signatures on, and loads the kernel. But even still, that's a longshot. TBH, anyone who might be looking for exploits here should already be aware of the source code's existence, plus this sort of exploit would brobably be little different between MF3 and MDL.
EDIT:
Also, welcome to XDA!
Excuse the possibly noobish question here, but what does this mean for the new root status? My phone came with MF3 and I really would like to get some custom ROMs on here. :?
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
dlv_ said:
Excuse the possibly noobish question here, but what does this mean for the new root status? My phone came with MF3 and I really would like to get some custom ROMs on here. :?
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
No custom ROMs yet. Only root
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
graydiggy said:
No custom ROMs yet. Only root
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
The one that needs the micro SD card, correct?
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
Does this method work on the verizon Galaxy S3? Has anyone tried it to confirm it works? I want to downgrade so I can root and install cyanogenmod which I can't seem to do with the 4.3 update.
Link: How to downgrade Galaxy S3 back to Android 4.1.2: tutorial [Update] - AndroidPIT
Almostlastplace said:
Does this method work on the verizon Galaxy S3? Has anyone tried it to confirm it works? I want to downgrade so I can root and install cyanogenmod which I can't seem to do with the 4.3 update.
Link: How to downgrade Galaxy S3 back to Android 4.1.2: tutorial [Update] - AndroidPIT
Click to expand...
Click to collapse
Link is broken.
Regardless though, this probably will not work on this device.
Sent from my SCH-I535 using Tapatalk 2
BadUsername said:
Link is broken.
Regardless though, this probably will not work on this device.
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
Yeah I'm a new member and I just learned I can't post links, yet. but the method is from Androidpit and the method requires using Odin and a .tar file of an older version
At this point I'm pretty sure all methods have been tried to downgrade back to 4.1.2
Sent from my SCH-I535 using Tapatalk
Almostlastplace said:
Does this method work on the verizon Galaxy S3? Has anyone tried it to confirm it works? I want to downgrade so I can root and install cyanogenmod which I can't seem to do with the 4.3 update.
Link: How to downgrade Galaxy S3 back to Android 4.1.2: tutorial [Update] - AndroidPIT
Click to expand...
Click to collapse
If you took the OTA 4.3 update, the bootloader is locked and it has blocked ALL earlier factory versions and all non factory ROMS.
Sent from my SCH-I535 using xda app-developers app
Almostlastplace said:
Yeah I'm a new member and I just learned I can't post links, yet. but the method is from Androidpit and the method requires using Odin and a .tar file of an older version
Click to expand...
Click to collapse
I looked up your specific tutorial, it definitely will not work.
That only works on the international model. As a general rule, never trust a guide unless it says it's specifically for the Verizon galaxy s3. It's locked down much tighter than any other s3 models, and many alterations that can be performed on the other variants will often brick this model.
Sent from my SCH-I535 using Tapatalk 2
BadUsername said:
I looked up your specific tutorial, it definitely will not work.
That only works on the international model. As a general rule, never trust a guide unless it says it's specifically for the Verizon galaxy s3. It's locked down much tighter than any other s3 models, and many alterations that can be performed on the other variants will often brick this model.
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
Ah thanks, and that really sucks the 4.3 eats away at my battery like non other and it was the final straw in getting me to look up how to install a custom rom only to learn that I can't...
Almostlastplace said:
Ah thanks, and that really sucks the 4.3 eats away at my battery like non other and it was the final straw in getting me to look up how to install a custom rom only to learn that I can't...
Click to expand...
Click to collapse
You can still root, install a ROM with Safe Root or Safestrap or whatever, and have a better-running phone. You simply can't install a different kernel... it sounds like you can even still have a custom Recovery (modified TWRP is my understanding).
OK
Sent from my SCH-I535 using xda app-developers app
I can't post links but if you search for thread number 2565758, that's everything you need for the Saferoot method that works for the Galaxy S3 (usually). I say usually because it doesn't work on my phone but I know plenty of others that have had no issues.
MetalMan2 said:
You can still root, install a ROM with Safe Root or Safestrap or whatever, and have a better-running phone. You simply can't install a different kernel... it sounds like you can even still have a custom Recovery (modified TWRP is my understanding).
Click to expand...
Click to collapse
I have used Safes Root and Safestrap, but i can't get the ROM I want (Cyanogenmod) to work with it.
shark_dude said:
I can't post links but if you search for thread number 2565758, that's everything you need for the Saferoot method that works for the Galaxy S3 (usually). I say usually because it doesn't work on my phone but I know plenty of others that have had no issues.
Click to expand...
Click to collapse
I've already used saferoot but I can't get into custom recovery with it, and I can't use custom ROMs because of the update, that's why I've been looking fr a way to downgrade to 4.1 or something.
Almostlastplace said:
I have used Safes Root and Safestrap, but i can't get the ROM I want (Cyanogenmod) to work with it.
I've already used saferoot but I can't get into custom recovery with it, and I can't use custom ROMs because of the update, that's why I've been looking fr a way to downgrade to 4.1 or something.
Click to expand...
Click to collapse
Want some advice? Sell the S3 for a pre-4.3 S3 or sell the S3 for another device. Theres no guarantee that AOSP will ever work with Safestrap.
Sent from my SCH-I535 using Tapatalk 4
SlimSnoopOS said:
Want some advice? Sell the S3 for a pre-4.3 S3 or sell the S3 for another device. Theres no guarantee that AOSP will ever work with Safestrap.
Sent from my SCH-I535 using Tapatalk 4
Click to expand...
Click to collapse
Well I have been considering dropping a bit of money getting a used international S3 because the Cyanogenmod installer would work with it, but I don't think my Verizon SIM card would work in it.
Almostlastplace said:
Well I have been considering dropping a bit of money getting a used international S3 because the Cyanogenmod installer would work with it, but I don't think my Verizon SIM card would work in it.
Click to expand...
Click to collapse
It wouldn't, you need a CDMA device, the international s3 doesn't have CDMA bands. Verizon leaves you pretty limited in device selection.
Sent from my SCH-I535 using Tapatalk 2
BadUsername said:
It wouldn't, you need a CDMA device, the international s3 doesn't have CDMA bands. Verizon leaves you pretty limited in device selection.
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
That's what I thought, so that pretty much just leaves me with Verizon versions of the phone... I'll make sure not to stick with verizon when my current contract expires.
Hello everyone,
I have a SCH-I535 running 4.4.2 that I bricked last night after running ez-unlocker (attempting to modify the bootload) and just got it back to work after using a debrick image... I would like to know if it is possible to downgrade back to JB 4.1.2? and if so how will accomplish this since it is not letting me bypass the odin process due to a recovery failed error...
Thank you very much!
Giro13 said:
Hello everyone,
I have a SCH-I535 running 4.4.2 that I bricked last night after running ez-unlocker (attempting to modify the bootload) and just got it back to work after using a debrick image... I would like to know if it is possible to downgrade back to JB 4.1.2? and if so how will accomplish this since it is not letting me bypass the odin process due to a recovery failed error...
Thank you very much!
Click to expand...
Click to collapse
Yes but you would need to send it out for a jtag repair
Mobiletechvideos.com
Sent from my SCH-I535 using Xparent ICS Tapatalk 2
ShapesBlue said:
Yes but you would need to send it out for a jtag repair
Mobiletechvideos.com
Sent from my SCH-I535 using Xparent ICS Tapatalk 2
Click to expand...
Click to collapse
It's fifty dollars, I might add
Sent from my SCH-I535 using XDA Free mobile app
poppers162 said:
It's fifty dollars, I might add
Sent from my SCH-I535 using XDA Free mobile app
Click to expand...
Click to collapse
Well worth it for an unlocked bootloader
Sent from my SCH-I535 using Xparent ICS Tapatalk 2
ShapesBlue said:
Well worth it for an unlocked bootloader
Sent from my SCH-I535 using Xparent ICS Tapatalk 2
Click to expand...
Click to collapse
Wait a week or so. I had an idea the other day and we are just now trying to put it to the test. It may unlock the bootloader, who knows! The method works on Motorola phones with the Qualcomm msm8960 chips. And guess what. The s3 has the same chip. And the exploit was directed towards that chip.
Sent from my SCH-I535 using XDA Free mobile app
poppers162 said:
Wait a week or so. I had an idea the other day and we are just now trying to put it to the test. It may unlock the bootloader, who knows! The method works on Motorola phones with the Qualcomm msm8960 chips. And guess what. The s3 has the same chip. And the exploit was directed towards that chip.
Click to expand...
Click to collapse
Here's to "if there's a will, there's a way" attitude
poppers162 said:
Wait a week or so. I had an idea the other day and we are just now trying to put it to the test. It may unlock the bootloader, who knows! The method works on Motorola phones with the Qualcomm msm8960 chips. And guess what. The s3 has the same chip. And the exploit was directed towards that chip.
Sent from my SCH-I535 using XDA Free mobile app
Click to expand...
Click to collapse
Any word on this?
Amtip said:
Any word on this?
Click to expand...
Click to collapse
Still testing and digging! But I feel like our efforts are fruitless, as I am no developer and I feel like my friend and I's ideas have been thought of and tested and failed. I do not want to bring any hopes up. But it's starting to look more and more possible. Just be patient
Sent from my Unlocked SCH-I535 running AOKP
poppers162 said:
Still testing and digging! But I feel like our efforts are fruitless, as I am no developer and I feel like my friend and I's ideas have been thought of and tested and failed. I do not want to bring any hopes up. But it's starting to look more and more possible. Just be patient
Sent from my Unlocked SCH-I535 running AOKP
Click to expand...
Click to collapse
I do hope it's successful! I stupidly took the 4.3 OTA, and I've been regretting it since. Do keep us posted, please!
nothing
xerotix said:
Yeah, I've been trying to downgrade through odin and it's not even working. Pissmehoff
---------- Post added at 04:23 PM ---------- Previous post was at 04:00 PM ----------
Fix I've found to downgrade from 4.3
Click to expand...
Click to collapse
That link has been posted in these forums before. That downgrade only works on the i9300 international version, not the i535 Verizon version. The screenshot in the article you linked even shows the about phone as the i9300. This article you linked is from 8 months ago. If this worked on the Verizon version it would have been all over these forums. The article you linked even mentions how trying this process resulted in hard bricks on the AT&T version. Anyone trying this on the Verizon version will suffer the same fate.
landshark68 said:
That link has been posted in these forums before. That downgrade only works on the i9300 international version, not the i535 Verizon version. The screenshot in the article you linked even shows the about phone as the i9300. This article you linked is from 8 months ago. If this worked on the Verizon version it would have been all over these forums. The article you linked even mentions how trying this process resulted in hard bricks on the AT&T version. Anyone trying this on the Verizon version will suffer the same fate.
Click to expand...
Click to collapse
Understood, thanks. I didn't look into details.
xerotix said:
Understood, thanks. I didn't look into details.
Click to expand...
Click to collapse
You posted a link without even reading the details contained inside? Not a good practice. Plenty of new people who would read your description, click on the link, follow the suggestion contained in the article without also looking into the details, and brick their phone. I removed the link from my quote of you. You may want to consider removing the link from your previous post. Just saying.
landshark68 said:
You posted a link without even reading the details contained inside? Not a good practice. Plenty of new people who would read your description, click on the link, follow the suggestion contained in the article without also looking into the details, and brick their phone. I removed the link from my quote of you. You may want to consider removing the link from your previous post. Just saying.
Click to expand...
Click to collapse
good point. done, thanks
poppers162 said:
Wait a week or so. I had an idea the other day and we are just now trying to put it to the test. It may unlock the bootloader, who knows! The method works on Motorola phones with the Qualcomm msm8960 chips. And guess what. The s3 has the same chip. And the exploit was directed towards that chip.
Sent from my SCH-I535 using XDA Free mobile app
Click to expand...
Click to collapse
man hope it works cause being on this 4.4.2 sucks ass since the loader is locked
astonmartin214 said:
man hope it works cause being on this 4.4.2 sucks ass since the loader is locked
Click to expand...
Click to collapse
hope it works as well going through 2 other insurance phones miss my unlocked boot loader on my old s3 could fix some issues of 4.3.1
Sent from my SCH-I535 using Tapatalk
nikkifm said:
hope it works as well going through 2 other insurance phones miss my unlocked boot loader on my old s3 could fix some issues of 4.3.1
Sent from my SCH-I535 using Tapatalk
Click to expand...
Click to collapse
man now am like really was going to flash DU on this phone now I can't
astonmartin214 said:
man now am like really was going to flash DU on this phone now I can't
Click to expand...
Click to collapse
I miss my ose rom I was running KitKat 4.4.3 before it died I was pulling atlest over a day with 4 or so hours of screen time with my 2300mah zero lemon battery's only way I know of downgrading is to swap the board or j tag it or get one with the older boot loader glad atlest to have root, hope this exploit will work
Sent from my SCH-I535 using Tapatalk
nikkifm said:
I miss my ose rom I was running KitKat 4.4.3 before it died I was pulling atlest over a day with 4 or so hours of screen time with my 2300mah zero lemon battery's only way I know of downgrading is to swap the board or j tag it or get one with the older boot loader glad atlest to have root, hope this exploit will work
Sent from my SCH-I535 using Tapatalk
Click to expand...
Click to collapse
I was thinking is there a way you can hardbrick it then debrick it without having to send it off then push 4.1.2
astonmartin214 said:
I was thinking is there a way you can hardbrick it then debrick it without having to send it off then push 4.1.2
Click to expand...
Click to collapse
with the d brick image boot from ext SD without a boot loader thought of it once but thinking it probably will premeantly brick your phone
Sent from my SCH-I535 using Tapatalk