Is there a bigpart boot.img available that can be used to replace the standard boot.img in the EOS 3 Stable release?
I have tried the one from CM11 and EOS 4 bigpart roms but they don't work.
I'm finding EOS 4 way too laggy and EOS 3 runs perfectly smooth (even if it is only 4.1.1)
Related
Can I use my Codename Android Tiamat sourced kernel on the "stock" VZW JB rom? Would like to have OC. I did run the Team Eos rom for a while, but I kinda prefer more of stock rom.
Hiya,
New poster here. Would anyone know how to load the voodoo module in guevor's new kernel? (EOS3_700) As posters state that it is not implemented by default.
http://forum.xda-developers.com/showpost.php?p=29787288&postcount=2271
Thanks!
I got it work with the following configuration:
[ROM] Team EOS Nightlies JB 4.1.1 TF101 Build #57
[KERNEL] Tim_VoodooV3_JBKernel_EOS3_Guevor696 [RECOVERY] Rogue XM Touch Recovery v1.5.0-R1
After you flash JB ROM, flash VooDoo JB Kernel, then you have to load the VooDoo Sound app
dulcedosa said:
I got it work with the following configuration:
[ROM] Team EOS Nightlies JB 4.1.1 TF101 Build #57
[KERNEL] Tim_VoodooV3_JBKernel_EOS3_Guevor696 [RECOVERY] Rogue XM Touch Recovery v1.5.0-R1
After you flash JB ROM, flash VooDoo JB Kernel, then you have to load the VooDoo Sound app
Click to expand...
Click to collapse
Thanks! Unfortunately I have been getting RR and no deep sleep on the 696 version, whereas 700 seems to be okay so far. In the 700 version apparently voodoo is enabled but you have to load the module, so I am not sure what that means...
I've tried all the 4.2 ROMs I know of (CM 10.1, EOS 4, ORCA 2). CM won't boot on my Xoom, EOS and ORCA stutter and are just miserable to use.
So I am back to running CM 10.0. I like it but I am not in love with it. I've also tried EOS 3.0. I like the kernel better, but I prefer CM to EOS overall. Are there any other 4.1 based ROMs out there, or are there any other kernels for CM 10 aside from the one which comes with CM? I'd like to run the lagfree or SmartassX (or is it Smartass2) governor.
If anyone has links to other ROMs / Kernels which are 4.1 / CM 10.0 that would be much appreciated.
Maybe try Dreamcwli's My Android, its 4.2 but it is the fastest ROM for me
4.2 also has 2 custom kernels available, Shield kernel and ElementalX. Both are good.
ElementalX has a CM compatible version now. Shield is AOSP only
So you could try all the roms again with the new kernel
Sent from my Xoom using Tapatalk 2
Hoochie_Coochie said:
Maybe try Dreamcwli's My Android, its 4.2 but it is the fastest ROM for me
4.2 also has 2 custom kernels available, Shield kernel and ElementalX. Both are good.
ElementalX has a CM compatible version now. Shield is AOSP only
So you could try all the roms again with the new kernel
Sent from my Xoom using Tapatalk 2
Click to expand...
Click to collapse
Sadly ExperimentalX does not work for me at all. I never get past the boot animation screen. I've tried the regular version on EOS4, and the CM version on CM 10.1. Actually, I can never ever get 10.1 to come up even with stock kernel. I will give My Android 4.2 a try, but with my lack of luck with CM 10.1, ORCA and EOS4 I honestly am not holding out any hope for My Android to work.
I am not sure what the issue is with my XOOM and what 4.2 items are out there right now. My XOOM was one of the very first as I got it when they hit the street, so perhaps there is slightly older / less stable hardware (i.e. cannot support GPU OC) which causes issues with 4.2.
Which roms would you recommend for the TF300T, at this point I've been using Baked BB-8, but I think there is a lot of times where it lags from wake-up, and the battery life could be better.
I've looked at AOSPA Paranoid Android (4.2.2), CleanRom Inheritance 4.1 (4.2.1), AOKP 4.2.2, etc.
But which to choose...?
---
David
Divad89 said:
Which roms would you recommend for the TF300T, at this point I've been using Baked BB-8, but I think there is a lot of times where it lags from wake-up, and the battery life could be better.
I've looked at AOSPA Paranoid Android (4.2.2), CleanRom Inheritance 4.1 (4.2.1), AOKP 4.2.2, etc.
But which to choose...?
---
David
Click to expand...
Click to collapse
Depends on if you want stock-based or custom, if stock I say go for CRI 3.4 (Or 4.1 if you're on the 4.2.1 bootloader), if you want custom definately go for AOSPA, I'm using AOSPA right now flashed with the perfs kernel, and I have to say it's one of the smoothest custom roms I've used, especially with the custimizability to it and the tablet UI, you can't go wrong! But in the end it's all about preference.
Divad89 said:
Which roms would you recommend for the TF300T, at this point I've been using Baked BB-8, but I think there is a lot of times where it lags from wake-up, and the battery life could be better.
I've looked at AOSPA Paranoid Android (4.2.2), CleanRom Inheritance 4.1 (4.2.1), AOKP 4.2.2, etc.
But which to choose...?
---
David
Click to expand...
Click to collapse
I've tried every single one of them, in my opinion assuming you are on the 4.1.1 bootloader, the best stock ROM is BlueAndroid v3.0 Surdu's kernel is smooth and full of options, now AOSP based I was on CM10.1 and it was great, then I tried Paranoid 3.15 and it was also laggy from wake up, so I changed to BB-8 with Perf. Kernel because of all the options and I have to say it's running super awesome, I have it Overclocked to 1.5ghz and it's great. You should try Perf kernel if you haven't it performs very well, I use no frills cpu from the market.
Erik
cromi all the way for me but i like stock based
Jelly bean 4.2.2 (PACMAN ROM)
OR
CYANOGEN MOD 10.1 ?? (kernel 2.x)
As these both roms are of "tech kang"!!!
Should i wait for PACMAN or go with CM 10.1 (kernel 2.x)????
???
PACMAN is modified CM rom.
& its combination of Paranoid Android | CyanogenMod | AOKP Rom's so this roms provides additional features than stock CM,
but like always for stability stock always best so CM best for stability
for all in one features Pacman takes lead...
Pac rom is very slow !
I recommend for you cyanogenmod 10.1.3 kernel 2.x / 3.0 by techkang : http://forum.xda-developers.com/showthread.php?t=2530712
PACMAN rom has features of paranoid android , AOKP and CM rom but if u want stability then u should go for CyanogenMod rom
PACMAN rom has random reboots which irritates a lot.........
Sent from my GT-S7500 using xda app-developers app