New Tesco UK moto g unlocked and rooted with twrp and everything just about perfect until...
I started getting system ui crashes after installing xposed framework so I disabled it and then I lost wifi, then lost mobile data. Turns out virgin media+virgin mobile had an outage of both at the same time but I thought it was a problem with the phone so...I flashed the xposed disabler recovery zip to reset everything back to stock. It complained about finding no backup.
At this point I decided to run a twrp restore. The phone rebooted while restoring system.
I can still get into fastboot so I try flashing UK stock
C:\motog\adb>mfastboot flash partition gpt.bin
sending 'partition' (32 KB)...
OKAY [ 0.031s]
writing 'partition'...
This may take a few seconds, if a
different partition table is being
flashed since we need to backup
and restore a few partitions
Flashing primary GPT image...
Flashing backup GPT image...
OKAY [ 0.444s]
finished. total time: 0.476s
C:\motog\adb>mfastboot flash motoboot motoboot.img
sending 'motoboot' (1940 KB)...
OKAY [ 0.160s]
writing 'motoboot'...
flashing tz ...
flashing rpm ...
flashing sdi ...
flashing aboot ...
flashing sbl1 ...
OKAY [ 1.530s]
finished. total time: 1.690s
C:\motog\adb>mfastboot flash logo logo.bin
sending 'logo' (619 KB)...
OKAY [ 0.100s]
writing 'logo'...
OKAY [ 0.106s]
finished. total time: 0.207s
C:\motog\adb>mfastboot flash boot boot.img
sending 'boot' (10240 KB)...
OKAY [ 0.698s]
writing 'boot'...
OKAY [ 0.885s]
finished. total time: 1.585s
C:\motog\adb>mfastboot flash recovery recovery.img
sending 'recovery' (10240 KB)...
OKAY [ 0.708s]
writing 'recovery'...
OKAY [ 0.885s]
finished. total time: 1.594s
C:\motog\adb>mfastboot flash system system.img_sparsechunk.0
sending 'system' (252700 KB)...
OKAY [ 15.756s]
writing 'system'...
Click to expand...
Click to collapse
...which hangs writing sytem (still hanging now after 15 minutes)
Ideas? Please. Before I screw it up any further
ok, twrp was nerve wracking with the known touchscreen issue so I flashed cwm6045 via fastboot then formatted system then re-installed uk stock rom.
It's booting
Phew /wipes brow
Glad you got it sorted out. Good to know that cwm works on the g.
obvious said:
ok, twrp was nerve wracking with the known touchscreen issue so I flashed cwm6045 via fastboot then formatted system then re-installed uk stock rom.
It's booting
Phew /wipes brow
Click to expand...
Click to collapse
That's great to know....:victory:
I will now flash the CWM Recovery...where did the UK Stock ROM flashable zip, can you tell me?? Or did you flash via fastboot??
Thanks!!!
I flashed it via fastboot. Am sure a cwm repack will appear soon enough though
Hi all,
My moto g has a problem. It is stuck at the "warning bootloader unlocked screen"
I can boot into fastboot and flash stuff but when i try to boot it keeps displaying the "warning bootloader unlocked screen"
i have tryed several guides to flash orignal firmware but somehow it doesnt work.
Stange thing is is that i have CMW installed but when i flash TWRP or something it says its ok but then when i go to recovery CMW always comes back.
Had the same problem, white boot logo. Download from here http://forum.xda-developers.com/showthread.php?t=2646415 During the process it will say something about boot loader, but never mind. U should have a OTA update when it finished and will lose root, but its not a big problem
regards
bobrda said:
Had the same problem, white boot logo. Download from here http://forum.xda-developers.com/showthread.php?t=2646415 During the process it will say something about boot loader, but never mind. U should have a OTA update when it finished and will lose root, but its not a big problem
regards
Click to expand...
Click to collapse
Yeah i tryed that one but it doesnt work even the logo doesnt work.
Beukhof1 said:
Yeah i tryed that one but it doesnt work even the logo doesnt work.
Click to expand...
Click to collapse
Maybe to try this one? Its the GPE rom but it may fix the phone .. http://forum.xda-developers.com/showthread.php?t=2646404
bobrda said:
Maybe to try this one? Its the GPE rom but it may fix the phone .. http://forum.xda-developers.com/showthread.php?t=2646404
Click to expand...
Click to collapse
Same thing its says its all ok but when i boot i just keeps showing the logo.
Code:
C:\Users\beukhof1\Downloads\GPE_XT1032_KOT49H.M004_CFC.xml>SET fastboot=fastboot
.exe
C:\Users\beukhof1\Downloads\GPE_XT1032_KOT49H.M004_CFC.xml>fastboot.exe getvar m
ax-sparse-size
max-sparse-size: 268435456
finished. total time: 0.002s
C:\Users\beukhof1\Downloads\GPE_XT1032_KOT49H.M004_CFC.xml>fastboot.exe oem fb_m
ode_set
... FAILED (remote failure)
finished. total time: 0.036s
C:\Users\beukhof1\Downloads\GPE_XT1032_KOT49H.M004_CFC.xml>fastboot.exe flash pa
rtition gpt.bin
sending 'partition' (32 KB)... OKAY [ 0.081s]
writing 'partition'... INFOThis may take a few seconds, if a
INFOdifferent partition table is being
INFOflashed since we need to backup
INFOand restore a few partitions
INFOFlashing primary GPT image...
INFOFlashing backup GPT image...
OKAY [ 0.469s]
finished. total time: 0.550s
C:\Users\beukhof1\Downloads\GPE_XT1032_KOT49H.M004_CFC.xml>fastboot.exe flash mo
toboot motoboot.img
sending 'motoboot' (1940 KB)... OKAY [ 0.205s]
writing 'motoboot'... INFOflashing tz ...
INFOflashing rpm ...
INFOflashing sdi ...
INFOflashing aboot ...
INFOflashing sbl1 ...
OKAY [ 1.380s]
finished. total time: 1.586s
C:\Users\beukhof1\Downloads\GPE_XT1032_KOT49H.M004_CFC.xml>fastboot.exe flash mo
dem NON-HLOS.bin
sending 'modem' (47484 KB)... OKAY [ 4.088s]
writing 'modem'... OKAY [ 0.732s]
finished. total time: 4.820s
C:\Users\beukhof1\Downloads\GPE_XT1032_KOT49H.M004_CFC.xml>fastboot.exe flash fs
g fsg.mbn
sending 'fsg' (719 KB)... OKAY [ 0.109s]
writing 'fsg'... OKAY [ 0.032s]
finished. total time: 0.142s
C:\Users\beukhof1\Downloads\GPE_XT1032_KOT49H.M004_CFC.xml>fastboot.exe erase mo
demst1
erasing 'modemst1'... OKAY [ 0.035s]
finished. total time: 0.035s
C:\Users\beukhof1\Downloads\GPE_XT1032_KOT49H.M004_CFC.xml>fastboot.exe erase mo
demst2
erasing 'modemst2'... OKAY [ 0.046s]
finished. total time: 0.046s
C:\Users\beukhof1\Downloads\GPE_XT1032_KOT49H.M004_CFC.xml>fastboot.exe flash lo
go logo.bin
sending 'logo' (2563 KB)... OKAY [ 0.271s]
writing 'logo'... OKAY [ 0.085s]
finished. total time: 0.356s
C:\Users\beukhof1\Downloads\GPE_XT1032_KOT49H.M004_CFC.xml>fastboot.exe flash bo
ot boot.img
sending 'boot' (10240 KB)... OKAY [ 0.896s]
writing 'boot'... OKAY [ 0.731s]
finished. total time: 1.627s
C:\Users\beukhof1\Downloads\GPE_XT1032_KOT49H.M004_CFC.xml>fastboot.exe flash re
covery recovery.img
sending 'recovery' (10240 KB)... OKAY [ 0.897s]
writing 'recovery'... OKAY [ 0.729s]
finished. total time: 1.626s
C:\Users\beukhof1\Downloads\GPE_XT1032_KOT49H.M004_CFC.xml>fastboot.exe flash sy
stem system.img_sparsechunk1
sending 'system' (248834 KB)... OKAY [ 21.396s]
writing 'system'... INFOInvalid signed image
OKAY [ 4.452s]
finished. total time: 25.848s
C:\Users\beukhof1\Downloads\GPE_XT1032_KOT49H.M004_CFC.xml>fastboot.exe flash sy
stem system.img_sparsechunk2
sending 'system' (253442 KB)... OKAY [ 23.077s]
writing 'system'... INFOFailed to validate sparse image
OKAY [ 4.052s]
finished. total time: 27.131s
C:\Users\beukhof1\Downloads\GPE_XT1032_KOT49H.M004_CFC.xml>fastboot.exe flash sy
stem system.img_sparsechunk3
sending 'system' (210534 KB)... OKAY [ 19.748s]
writing 'system'... INFOFailed to validate sparse image
OKAY [ 3.446s]
finished. total time: 23.195s
C:\Users\beukhof1\Downloads\GPE_XT1032_KOT49H.M004_CFC.xml>fastboot.exe erase ca
che
erasing 'cache'... OKAY [ 0.014s]
finished. total time: 0.015s
C:\Users\beukhof1\Downloads\GPE_XT1032_KOT49H.M004_CFC.xml>fastboot.exe erase us
erdata
erasing 'userdata'... OKAY [ 0.036s]
finished. total time: 0.037s
C:\Users\beukhof1\Downloads\GPE_XT1032_KOT49H.M004_CFC.xml>fastboot.exe oem fb_m
ode_clear
... OKAY [ 0.021s]
finished. total time: 0.022s
C:\Users\beukhof1\Downloads\GPE_XT1032_KOT49H.M004_CFC.xml>pause
Press any key to continue . . .
Beukhof1 said:
Same thing its says its all ok but when i boot i just keeps showing the logo.
Code:
C:\Users\beukhof1\Downloads\GPE_XT1032_KOT49H.M004_CFC.xml>SET fastboot=fastboot
.exe
C:\Users\beukhof1\Downloads\GPE_XT1032_KOT49H.M004_CFC.xml>fastboot.exe getvar m
ax-sparse-size
max-sparse-size: 268435456
finished. total time: 0.002s
C:\Users\beukhof1\Downloads\GPE_XT1032_KOT49H.M004_CFC.xml>fastboot.exe oem fb_m
ode_set
... FAILED (remote failure)
finished. total time: 0.036s
Sorry I cant help you than. This two rooms work on my phone.. talking about xt 1032
C:\Users\beukhof1\Downloads\GPE_XT1032_KOT49H.M004_CFC.xml>fastboot.exe flash pa
rtition gpt.bin
sending 'partition' (32 KB)... OKAY [ 0.081s]
writing 'partition'... INFOThis may take a few seconds, if a
INFOdifferent partition table is being
INFOflashed since we need to backup
INFOand restore a few partitions
INFOFlashing primary GPT image...
INFOFlashing backup GPT image...
OKAY [ 0.469s]
finished. total time: 0.550s
C:\Users\beukhof1\Downloads\GPE_XT1032_KOT49H.M004_CFC.xml>fastboot.exe flash mo
toboot motoboot.img
sending 'motoboot' (1940 KB)... OKAY [ 0.205s]
writing 'motoboot'... INFOflashing tz ...
INFOflashing rpm ...
INFOflashing sdi ...
INFOflashing aboot ...
INFOflashing sbl1 ...
OKAY [ 1.380s]
finished. total time: 1.586s
C:\Users\beukhof1\Downloads\GPE_XT1032_KOT49H.M004_CFC.xml>fastboot.exe flash mo
dem NON-HLOS.bin
sending 'modem' (47484 KB)... OKAY [ 4.088s]
writing 'modem'... OKAY [ 0.732s]
finished. total time: 4.820s
C:\Users\beukhof1\Downloads\GPE_XT1032_KOT49H.M004_CFC.xml>fastboot.exe flash fs
g fsg.mbn
sending 'fsg' (719 KB)... OKAY [ 0.109s]
writing 'fsg'... OKAY [ 0.032s]
finished. total time: 0.142s
C:\Users\beukhof1\Downloads\GPE_XT1032_KOT49H.M004_CFC.xml>fastboot.exe erase mo
demst1
erasing 'modemst1'... OKAY [ 0.035s]
finished. total time: 0.035s
C:\Users\beukhof1\Downloads\GPE_XT1032_KOT49H.M004_CFC.xml>fastboot.exe erase mo
demst2
erasing 'modemst2'... OKAY [ 0.046s]
finished. total time: 0.046s
C:\Users\beukhof1\Downloads\GPE_XT1032_KOT49H.M004_CFC.xml>fastboot.exe flash lo
go logo.bin
sending 'logo' (2563 KB)... OKAY [ 0.271s]
writing 'logo'... OKAY [ 0.085s]
finished. total time: 0.356s
C:\Users\beukhof1\Downloads\GPE_XT1032_KOT49H.M004_CFC.xml>fastboot.exe flash bo
ot boot.img
sending 'boot' (10240 KB)... OKAY [ 0.896s]
writing 'boot'... OKAY [ 0.731s]
finished. total time: 1.627s
C:\Users\beukhof1\Downloads\GPE_XT1032_KOT49H.M004_CFC.xml>fastboot.exe flash re
covery recovery.img
sending 'recovery' (10240 KB)... OKAY [ 0.897s]
writing 'recovery'... OKAY [ 0.729s]
finished. total time: 1.626s
C:\Users\beukhof1\Downloads\GPE_XT1032_KOT49H.M004_CFC.xml>fastboot.exe flash sy
stem system.img_sparsechunk1
sending 'system' (248834 KB)... OKAY [ 21.396s]
writing 'system'... INFOInvalid signed image
OKAY [ 4.452s]
finished. total time: 25.848s
C:\Users\beukhof1\Downloads\GPE_XT1032_KOT49H.M004_CFC.xml>fastboot.exe flash sy
stem system.img_sparsechunk2
sending 'system' (253442 KB)... OKAY [ 23.077s]
writing 'system'... INFOFailed to validate sparse image
OKAY [ 4.052s]
finished. total time: 27.131s
C:\Users\beukhof1\Downloads\GPE_XT1032_KOT49H.M004_CFC.xml>fastboot.exe flash sy
stem system.img_sparsechunk3
sending 'system' (210534 KB)... OKAY [ 19.748s]
writing 'system'... INFOFailed to validate sparse image
OKAY [ 3.446s]
finished. total time: 23.195s
C:\Users\beukhof1\Downloads\GPE_XT1032_KOT49H.M004_CFC.xml>fastboot.exe erase ca
che
erasing 'cache'... OKAY [ 0.014s]
finished. total time: 0.015s
C:\Users\beukhof1\Downloads\GPE_XT1032_KOT49H.M004_CFC.xml>fastboot.exe erase us
erdata
erasing 'userdata'... OKAY [ 0.036s]
finished. total time: 0.037s
C:\Users\beukhof1\Downloads\GPE_XT1032_KOT49H.M004_CFC.xml>fastboot.exe oem fb_m
ode_clear
... OKAY [ 0.021s]
finished. total time: 0.022s
C:\Users\beukhof1\Downloads\GPE_XT1032_KOT49H.M004_CFC.xml>pause
Press any key to continue . . .
Click to expand...
Click to collapse
Sorry I cant help you. It works on my phone. model xt 1032
bobrda said:
Sorry I cant help you. It works on my phone. model xt 1032
Click to expand...
Click to collapse
I have the same model
Beukhof1 said:
I have the same model
Click to expand...
Click to collapse
Don't know whats couching you the problem. try to push rom via adb
or maybe this one http://forum.xda-developers.com/showthread.php?t=2542219
i had no success with this rom, but...
it's beyond my knowledge
bobrda said:
Don't know whats couching you the problem. try to push rom via adb
or maybe this one http://forum.xda-developers.com/showthread.php?t=2542219
i had no success with this rom, but...
it's beyond my knowledge
Click to expand...
Click to collapse
Every thing i flash even recovery doesnt seem to stick because when i fastboot twrp i still have my cmw.
Beukhof1 said:
Every thing i flash even recovery doesnt seem to stick because when i fastboot twrp i still have my cmw.
Click to expand...
Click to collapse
Few dayes ago i download Gb 4.4.2 rom and flash it with no mistakes thru the flash! It have no errors while flashing. After that had a update to 176.44.1
So my phone is for European market and with sparsechunk.0 sparsechunk.1 sparsechunk.2 have no errors. With 1.2.and 3sparsechunk i have errors, but i can but in the rom normally...
Then i use a mototool 3 and root my phone with twrp recovery...
Beukhof1 said:
Hi all,
My moto g has a problem. It is stuck at the "warning bootloader unlocked screen"
I can boot into fastboot and flash stuff but when i try to boot it keeps displaying the "warning bootloader unlocked screen"
i have tryed several guides to flash orignal firmware but somehow it doesnt work.
Stange thing is is that i have CMW installed but when i flash TWRP or something it says its ok but then when i go to recovery CMW always comes back.
Click to expand...
Click to collapse
Did you manage to get a fix for this? I have the exact same issue, did all the steps you mentioned and have not found a fix, did you hace any luck?
Iggyavendano said:
Did you manage to get a fix for this? I have the exact same issue, did all the steps you mentioned and have not found a fix, did you hace any luck?
Click to expand...
Click to collapse
Nope sorry man. Mine is stille dead. I think the flash memory is defectieve.
Beukhof1 said:
Nope sorry man. Mine is stille dead. I think the flash memory is defectieve.
Click to expand...
Click to collapse
I went back to my carrier rom and It worked... after a few flashes on lollipop I couldn't get it to work even on stock lollipop...
hope it helps.
Try with mfastboot-v2. You can find the link with a quick search. mfastboot may help with flashing larger system images than normal fastboot. Just give it a try.
And if you are on lollipop & trying to downgrade to kitkat, skip flashing motoboot.img & gpt.bin
legolas06 said:
Try with mfastboot-v2. You can find the link with a quick search. mfastboot may help with flashing larger system images than normal fastboot. Just give it a try.
And if you are on lollipop & trying to downgrade to kitkat, skip flashing motoboot.img & gpt.bin
Click to expand...
Click to collapse
I had the same problem, and tried everithing said here, the only thing that worked, was mfastboot - v2, thank a lot for the sugestion.
Device not seen
I'm having the same problem – stuck on "Warning Booloader Unlocked" screen. Can't get to the bootloader screen. 'adb devices' and 'mfastboot devices' both show empty device lists, which means that I can't execute any adb or mfastboot commands...
Moto G XT1032 (Gen 1, 2013), attempted to install 5.1 firmware using steps at www . droidviews . com/restore-moto-g-to-stock-and-downgrade-firmware (sorry, not allowed to add live link). Bootloader unlocked, USB drivers installed, USB debugging enabled. All mfastboot steps executed without error, but I missed sparsechunk.0 – duh. Finished with a 'mfastboot reboot', and ever since, can't get past the bootloader warning, and no device seen by adb or mfastboot... Can't imagine it's a connectivity or PC driver issue, as was working fine minutes ago before the reboot.
All the solutions I've found depend on adb or mfastboot being able to see my device. Any tips to get the device seen again?
Thanks!
aussiejim said:
I'm having the same problem – stuck on "Warning Booloader Unlocked" screen. Can't get to the bootloader screen. 'adb devices' and 'mfastboot devices' both show empty device lists, which means that I can't execute any adb or mfastboot commands...
Moto G XT1032 (Gen 1, 2013), attempted to install 5.1 firmware using steps at www . droidviews . com/restore-moto-g-to-stock-and-downgrade-firmware (sorry, not allowed to add live link). Bootloader unlocked, USB drivers installed, USB debugging enabled. All mfastboot steps executed without error, but I missed sparsechunk.0 – duh. Finished with a 'mfastboot reboot', and ever since, can't get past the bootloader warning, and no device seen by adb or mfastboot... Can't imagine it's a connectivity or PC driver issue, as was working fine minutes ago before the reboot.
All the solutions I've found depend on adb or mfastboot being able to see my device. Any tips to get the device seen again?
Thanks!
Click to expand...
Click to collapse
Problem solved – eventually got into bootloader screen on phone, after at least 20 tries... If you have same problem, keep on trying.
hello,
i've got this lg-D820 stuck in CWM Recovery v6.0.4.5 screen
i want to flash it back to recovery and downloaded 5.1.1 factory image from google developers site
but i always get error while flashing bootloader,something like this-
Code:
sending 'bootloader' (3119 KB)...
OKAY [ 0.334s]
writing 'bootloader'...
FAILED (remote: flash write failure)
finished. total time: 43.583s
rebooting into bootloader...
OKAY [ 0.076s]
finished. total time: 0.080s
< waiting for device >
i need help to fix this set
Hi friends It's me REET-The Hacker.Studying in Class 12th and fond of Android Devices.And this is my 1st thread.
In this thread I am providing you the fastboot flashable rom for LYF Flame 6.
This rom is pre rooted and its the official stock one.For Build number or any other kind of information see the screenshot below.
STEPS TO FLASH THE ROM;1.Extract the rom file(link is given below).
2.Go to fastboot mode.For this see this video coz it's complicated and i have wasted enough time to get into bootloader.:angel:
Link-: Mod edit: link removed.
However i am also writing down the steps.
>Power off your device.
>Switch on the device by holding "power" and "volume -" key.
>After that you will see android logo.
>Then hold the "power" key for 1 sec and press the "volume + key".
>You will get into recovery now simply select 'reboot to bootloader" option by pressing "volume -" and "power" key.
3.Now open the folder where you have extracted the rom.
4.Double click on "Flash all.bat".
After that wait for some time till it completes after that pull up the battery and power on your device.
You will see that your phone is now rooted and some apps will be installed.
If you have any type of "phone not detecting" issue then install all the drivers ONE BY ONE.
Check the screenshots below.
DOWNLOAD LINK FOR ROM
Mod edit: link removed.
DOWNLOAD LINK FOR DRIVERS
Mod edit: link removed.
Hit me a Thanks or Rate my thread,If i Helped You.Please.
reetpriye said:
snip
Click to expand...
Click to collapse
Sir .. tried the procedures as mentioned in the post but could not get the device rooted (LYF flame 6) .... only does a factory reset .... would be thankful if could help getting the phone rooted ....
rsmani1965 said:
Sir .. tried the procedures as mentioned in the post but could not get the device rooted (LYF flame 6) .... only does a factory reset .... would be thankful if could help getting the phone rooted ....
Click to expand...
Click to collapse
Do all the steps carefully what issue are you facing,
For rooting guide you can follow this too https://www.skyneel.com/root-lyf-flame-6:good:
Please share your WhatsApp number or WhatsApp me 8737978358
Bro my phone was running on version 8, then it automatically started updating and my phone was bricked! It was showing "no command", I did hard reset but that also didn't work! I took it to service centre, they fixed my phone but now the software is version 11.... And it does not have multi-tasking view! Also wifi is not working now! I want to go back to version 8 now.... I have downloaded your firmware, but I don't know how to install the drivers! Plz help bro.... My whatsapp number is - +919804102574
IM try This Method Not DOne
rsmani1965 said:
Sir .. tried the procedures as mentioned in the post but could not get the device rooted (LYF flame 6) .... only does a factory reset .... would be thankful if could help getting the phone rooted ....
Click to expand...
Click to collapse
After flash Same Restart Complaint Not solved My problem
Flah Details
G:\china\LYF\LS-4005\201608212219-FASTBOOT-LYF_LS-4005_06_08>fastboot flash boot
boot.img
sending 'boot' (15360 KB)...
OKAY [ 0.498s]
writing 'boot'...
OKAY [ 0.432s]
finished. total time: 0.933s
G:\china\LYF\LS-4005\201608212219-FASTBOOT-LYF_LS-4005_06_08>fastboot flash reco
very recovery.img
sending 'recovery' (15360 KB)...
OKAY [ 0.491s]
writing 'recovery'...
OKAY [ 0.439s]
finished. total time: 0.934s
G:\china\LYF\LS-4005\201608212219-FASTBOOT-LYF_LS-4005_06_08>fastboot erase syst
em
erasing 'system'...
OKAY [ 2.777s]
finished. total time: 2.778s
G:\china\LYF\LS-4005\201608212219-FASTBOOT-LYF_LS-4005_06_08>fastboot flash -u s
ystem system.img_sparsechunk.0
sending 'system' (131082 KB)...
OKAY [ 4.177s]
writing 'system'...
OKAY [ 7.033s]
finished. total time: 11.215s
G:\china\LYF\LS-4005\201608212219-FASTBOOT-LYF_LS-4005_06_08>fastboot flash -u s
ystem system.img_sparsechunk.1
sending 'system' (131082 KB)...
OKAY [ 4.194s]
writing 'system'...
OKAY [ 7.279s]
finished. total time: 11.477s
G:\china\LYF\LS-4005\201608212219-FASTBOOT-LYF_LS-4005_06_08>fastboot flash -u s
ystem system.img_sparsechunk.2
sending 'system' (131082 KB)...
OKAY [ 4.183s]
writing 'system'...
OKAY [ 7.585s]
finished. total time: 11.773s
G:\china\LYF\LS-4005\201608212219-FASTBOOT-LYF_LS-4005_06_08>fastboot flash -u s
ystem system.img_sparsechunk.3
sending 'system' (131082 KB)...
OKAY [ 4.168s]
writing 'system'...
OKAY [ 8.160s]
finished. total time: 12.333s
G:\china\LYF\LS-4005\201608212219-FASTBOOT-LYF_LS-4005_06_08>fastboot flash -u s
ystem system.img_sparsechunk.4
sending 'system' (131082 KB)...
OKAY [ 4.167s]
writing 'system'...
OKAY [ 7.066s]
finished. total time: 11.237s
G:\china\LYF\LS-4005\201608212219-FASTBOOT-LYF_LS-4005_06_08>fastboot flash -u s
ystem system.img_sparsechunk.5
sending 'system' (112626 KB)...
OKAY [ 3.584s]
writing 'system'...
OKAY [ 6.345s]
finished. total time: 9.933s
G:\china\LYF\LS-4005\201608212219-FASTBOOT-LYF_LS-4005_06_08>fastboot erase user
data
erasing 'userdata'...
OKAY [ 9.490s]
finished. total time: 9.492s
G:\china\LYF\LS-4005\201608212219-FASTBOOT-LYF_LS-4005_06_08>fastboot flash -u u
serdata userdata.img_sparsechunk.0
sending 'userdata' (131082 KB)...
OKAY [ 4.160s]
writing 'userdata'...
OKAY [ 7.592s]
finished. total time: 11.757s
G:\china\LYF\LS-4005\201608212219-FASTBOOT-LYF_LS-4005_06_08>fastboot flash -u u
serdata userdata.img_sparsechunk.1
sending 'userdata' (131082 KB)...
OKAY [ 4.163s]
writing 'userdata'...
OKAY [ 7.154s]
finished. total time: 11.320s
G:\china\LYF\LS-4005\201608212219-FASTBOOT-LYF_LS-4005_06_08>fastboot flash -u u
serdata userdata.img_sparsechunk.2
sending 'userdata' (47586 KB)...
OKAY [ 1.515s]
writing 'userdata'...
OKAY [ 6.350s]
finished. total time: 7.869s
G:\china\LYF\LS-4005\201608212219-FASTBOOT-LYF_LS-4005_06_08>fastboot flash -u u
serdata userdata.img_sparsechunk.3
sending 'userdata' (112418 KB)...
OKAY [ 3.573s]
writing 'userdata'...
OKAY [ 7.676s]
finished. total time: 11.253s
G:\china\LYF\LS-4005\201608212219-FASTBOOT-LYF_LS-4005_06_08>fastboot erase cach
e
erasing 'cache'...
OKAY [ 0.585s]
finished. total time: 0.587s
G:\china\LYF\LS-4005\201608212219-FASTBOOT-LYF_LS-4005_06_08>fastboot flash -u c
ache cache.img_sparsechunk.0
sending 'cache' (131082 KB)...
OKAY [ 4.173s]
writing 'cache'...
OKAY [ 6.927s]
finished. total time: 11.105s
G:\china\LYF\LS-4005\201608212219-FASTBOOT-LYF_LS-4005_06_08>fastboot flash -u c
ache cache.img_sparsechunk.1
sending 'cache' (22530 KB)...
OKAY [ 0.723s]
writing 'cache'...
OKAY [ 2.872s]
finished. total time: 3.598s
G:\china\LYF\LS-4005\201608212219-FASTBOOT-LYF_LS-4005_06_08>pause
Press any key to continue . . .
Click to expand...
Click to collapse
This doesn't seem to be doing anything but damaging phones. Thread closed.
Thread reopened at OP request but we will be monitoring it, if the issues still remain then we will close it again
Regards
Sawdoctor
Hi all,
somehow my sons' D6603 messed up and didn't boot anymore. Had an old CarbonROM installed before, but that failed for no reason I can pinpoint.
OK, to recover I tried to reflash the ROM - but boot process got stuck in boot animation for hours (until battery ran out).
OK, so I fired up flashtool and tried to install an FTF - but all FTFs I tried to retrieve failed to unpack.
OK - one more try - got me a stock ROM that was supposed to be flashed through recovery.
Now I get Sony splashscreen, then display turns black and stays like that forever. Only sign of something happening is that the notification LED blinks occasionally.
I tried to enter recovery - wouldn't work at all: never saw any change in boot process.
I can put the phone into flash mode and into fastboot - so I tried to flash a new TWRP:
Code:
[email protected] ~/temp/TWRP-z3 $ fastboot flash FOTAKernel recovery.img
target didn't report max-download-size
sending 'FOTAKernel' (15904 KB)...
OKAY [ 0.502s]
writing 'FOTAKernel'...
OKAY [ 1.056s]
finished. total time: 1.558s
[email protected] ~/temp/TWRP-z3 $ fastboot flash recovery recovery.img
target didn't report max-download-size
sending 'recovery' (15904 KB)...
OKAY [ 0.501s]
writing 'recovery'...
OKAY [ 1.055s]
finished. total time: 1.556s
But still the mobile won't boot into recovery
OK, there's a different TWRP available - but I can't flash it to FOTAkernel:
Code:
[email protected] ~/Downloads $ fastboot flash FOTAkernel twrp_z3_2018-03-28.img
target didn't report max-download-size
sending 'FOTAkernel' (10808 KB)...
OKAY [ 0.342s]
writing 'FOTAkernel'...
FAILED (remote: Command not allowed)
finished. total time: 0.345s
[email protected] ~/Downloads $ fastboot flash recovery twrp_z3_2018-03-28.img
target didn't report max-download-size
sending 'recovery' (10808 KB)...
OKAY [ 0.342s]
writing 'recovery'...
OKAY [ 0.721s]
finished. total time: 1.063s
Can anyone help me to get stuff working again? I'm lost for options right now - TWRP won't come up, and I can't get an FTF via flashtool to my harddrive. Any other ways to unbrick the phone?
Got a recent LinuxMint 19.x here as my machine right now. Getting a Windows up and running would be an obstacle (although I might get a hand to one).