Hi friends It's me REET-The Hacker.Studying in Class 12th and fond of Android Devices.And this is my 1st thread.
In this thread I am providing you the fastboot flashable rom for LYF Flame 6.
This rom is pre rooted and its the official stock one.For Build number or any other kind of information see the screenshot below.
STEPS TO FLASH THE ROM;1.Extract the rom file(link is given below).
2.Go to fastboot mode.For this see this video coz it's complicated and i have wasted enough time to get into bootloader.:angel:
Link-: Mod edit: link removed.
However i am also writing down the steps.
>Power off your device.
>Switch on the device by holding "power" and "volume -" key.
>After that you will see android logo.
>Then hold the "power" key for 1 sec and press the "volume + key".
>You will get into recovery now simply select 'reboot to bootloader" option by pressing "volume -" and "power" key.
3.Now open the folder where you have extracted the rom.
4.Double click on "Flash all.bat".
After that wait for some time till it completes after that pull up the battery and power on your device.
You will see that your phone is now rooted and some apps will be installed.
If you have any type of "phone not detecting" issue then install all the drivers ONE BY ONE.
Check the screenshots below.
DOWNLOAD LINK FOR ROM
Mod edit: link removed.
DOWNLOAD LINK FOR DRIVERS
Mod edit: link removed.
Hit me a Thanks or Rate my thread,If i Helped You.Please.
reetpriye said:
snip
Click to expand...
Click to collapse
Sir .. tried the procedures as mentioned in the post but could not get the device rooted (LYF flame 6) .... only does a factory reset .... would be thankful if could help getting the phone rooted ....
rsmani1965 said:
Sir .. tried the procedures as mentioned in the post but could not get the device rooted (LYF flame 6) .... only does a factory reset .... would be thankful if could help getting the phone rooted ....
Click to expand...
Click to collapse
Do all the steps carefully what issue are you facing,
For rooting guide you can follow this too https://www.skyneel.com/root-lyf-flame-6:good:
Please share your WhatsApp number or WhatsApp me 8737978358
Bro my phone was running on version 8, then it automatically started updating and my phone was bricked! It was showing "no command", I did hard reset but that also didn't work! I took it to service centre, they fixed my phone but now the software is version 11.... And it does not have multi-tasking view! Also wifi is not working now! I want to go back to version 8 now.... I have downloaded your firmware, but I don't know how to install the drivers! Plz help bro.... My whatsapp number is - +919804102574
IM try This Method Not DOne
rsmani1965 said:
Sir .. tried the procedures as mentioned in the post but could not get the device rooted (LYF flame 6) .... only does a factory reset .... would be thankful if could help getting the phone rooted ....
Click to expand...
Click to collapse
After flash Same Restart Complaint Not solved My problem
Flah Details
G:\china\LYF\LS-4005\201608212219-FASTBOOT-LYF_LS-4005_06_08>fastboot flash boot
boot.img
sending 'boot' (15360 KB)...
OKAY [ 0.498s]
writing 'boot'...
OKAY [ 0.432s]
finished. total time: 0.933s
G:\china\LYF\LS-4005\201608212219-FASTBOOT-LYF_LS-4005_06_08>fastboot flash reco
very recovery.img
sending 'recovery' (15360 KB)...
OKAY [ 0.491s]
writing 'recovery'...
OKAY [ 0.439s]
finished. total time: 0.934s
G:\china\LYF\LS-4005\201608212219-FASTBOOT-LYF_LS-4005_06_08>fastboot erase syst
em
erasing 'system'...
OKAY [ 2.777s]
finished. total time: 2.778s
G:\china\LYF\LS-4005\201608212219-FASTBOOT-LYF_LS-4005_06_08>fastboot flash -u s
ystem system.img_sparsechunk.0
sending 'system' (131082 KB)...
OKAY [ 4.177s]
writing 'system'...
OKAY [ 7.033s]
finished. total time: 11.215s
G:\china\LYF\LS-4005\201608212219-FASTBOOT-LYF_LS-4005_06_08>fastboot flash -u s
ystem system.img_sparsechunk.1
sending 'system' (131082 KB)...
OKAY [ 4.194s]
writing 'system'...
OKAY [ 7.279s]
finished. total time: 11.477s
G:\china\LYF\LS-4005\201608212219-FASTBOOT-LYF_LS-4005_06_08>fastboot flash -u s
ystem system.img_sparsechunk.2
sending 'system' (131082 KB)...
OKAY [ 4.183s]
writing 'system'...
OKAY [ 7.585s]
finished. total time: 11.773s
G:\china\LYF\LS-4005\201608212219-FASTBOOT-LYF_LS-4005_06_08>fastboot flash -u s
ystem system.img_sparsechunk.3
sending 'system' (131082 KB)...
OKAY [ 4.168s]
writing 'system'...
OKAY [ 8.160s]
finished. total time: 12.333s
G:\china\LYF\LS-4005\201608212219-FASTBOOT-LYF_LS-4005_06_08>fastboot flash -u s
ystem system.img_sparsechunk.4
sending 'system' (131082 KB)...
OKAY [ 4.167s]
writing 'system'...
OKAY [ 7.066s]
finished. total time: 11.237s
G:\china\LYF\LS-4005\201608212219-FASTBOOT-LYF_LS-4005_06_08>fastboot flash -u s
ystem system.img_sparsechunk.5
sending 'system' (112626 KB)...
OKAY [ 3.584s]
writing 'system'...
OKAY [ 6.345s]
finished. total time: 9.933s
G:\china\LYF\LS-4005\201608212219-FASTBOOT-LYF_LS-4005_06_08>fastboot erase user
data
erasing 'userdata'...
OKAY [ 9.490s]
finished. total time: 9.492s
G:\china\LYF\LS-4005\201608212219-FASTBOOT-LYF_LS-4005_06_08>fastboot flash -u u
serdata userdata.img_sparsechunk.0
sending 'userdata' (131082 KB)...
OKAY [ 4.160s]
writing 'userdata'...
OKAY [ 7.592s]
finished. total time: 11.757s
G:\china\LYF\LS-4005\201608212219-FASTBOOT-LYF_LS-4005_06_08>fastboot flash -u u
serdata userdata.img_sparsechunk.1
sending 'userdata' (131082 KB)...
OKAY [ 4.163s]
writing 'userdata'...
OKAY [ 7.154s]
finished. total time: 11.320s
G:\china\LYF\LS-4005\201608212219-FASTBOOT-LYF_LS-4005_06_08>fastboot flash -u u
serdata userdata.img_sparsechunk.2
sending 'userdata' (47586 KB)...
OKAY [ 1.515s]
writing 'userdata'...
OKAY [ 6.350s]
finished. total time: 7.869s
G:\china\LYF\LS-4005\201608212219-FASTBOOT-LYF_LS-4005_06_08>fastboot flash -u u
serdata userdata.img_sparsechunk.3
sending 'userdata' (112418 KB)...
OKAY [ 3.573s]
writing 'userdata'...
OKAY [ 7.676s]
finished. total time: 11.253s
G:\china\LYF\LS-4005\201608212219-FASTBOOT-LYF_LS-4005_06_08>fastboot erase cach
e
erasing 'cache'...
OKAY [ 0.585s]
finished. total time: 0.587s
G:\china\LYF\LS-4005\201608212219-FASTBOOT-LYF_LS-4005_06_08>fastboot flash -u c
ache cache.img_sparsechunk.0
sending 'cache' (131082 KB)...
OKAY [ 4.173s]
writing 'cache'...
OKAY [ 6.927s]
finished. total time: 11.105s
G:\china\LYF\LS-4005\201608212219-FASTBOOT-LYF_LS-4005_06_08>fastboot flash -u c
ache cache.img_sparsechunk.1
sending 'cache' (22530 KB)...
OKAY [ 0.723s]
writing 'cache'...
OKAY [ 2.872s]
finished. total time: 3.598s
G:\china\LYF\LS-4005\201608212219-FASTBOOT-LYF_LS-4005_06_08>pause
Press any key to continue . . .
Click to expand...
Click to collapse
This doesn't seem to be doing anything but damaging phones. Thread closed.
Thread reopened at OP request but we will be monitoring it, if the issues still remain then we will close it again
Regards
Sawdoctor
Related
Hi,
my NSdoesnt boot and I cant flash another ROM because my NS cant mount SD anymore, so I tryed to restore it back to stock and flash the .imgs with fastboot. Boot.img, recovery.img, userdata.img, without problems, but the system.img gives me the message "write failed" or something. Tryed it multiple times with the Gingerbread system.img, and ICS system.img, same problem.
I can boot into recovery, but the phone doesnt recognize the SD and also the system partition.
Any solutions?
Sorry for my english.
What recovery you using?
Sent from my Nexus S using xda app-developers app
Tried 2 different CMW Recoveries, it's not a recovery problem. My System and SD storage is corrupt or something, I think.
It can't be all that corrupt as you are able to install boot loader and recovery. Try and adb sideload CyanogenMod 10.1. Once you got a booting phone, things tend to play nicely.
Sent from my Nexus S using xda app-developers app
Just tried the adb sideload method.
"Installing update..." for 5 Minutes now. I think it cant write on /system.
I've also tried to erase /system partition via fastboot it gives me also the "failed" message.
system.img write fail error
I have the same problem, can't write a system img to the phone
FASTBOOT STATUS - FAILWrite Fail
I have TWRP but it would not do anything to the system partition.
I tried to flash the stock rom
soju-jzo54k
I ran the flash-all.bat
this is the output
sending 'bootloader' (1536 KB)...
OKAY [ 0.215s]
writing 'bootloader'...
OKAY [ 0.385s]
finished. total time: 0.601s
rebooting into bootloader...
OKAY [ 0.001s]
finished. total time: 0.001s
< waiting for device >
sending 'radio' (12288 KB)...
OKAY [ 1.601s]
writing 'radio'...
OKAY [ 1.919s]
finished. total time: 3.520s
rebooting into bootloader...
OKAY [ 0.001s]
finished. total time: 0.001s
< waiting for device >
archive does not contain 'boot.sig'
archive does not contain 'recovery.sig'
archive does not contain 'system.sig'
--------------------------------------------
Bootloader Version...: I9020XXLC2
Baseband Version.....: I9020XXKI1
Serial Number........: 33304BC024EC00EC
--------------------------------------------
checking product...
OKAY [ -0.000s]
checking version-bootloader...
OKAY [ 0.001s]
checking version-baseband...
OKAY [ 0.001s]
sending 'boot' (3964 KB)...
OKAY [ 0.542s]
writing 'boot'...
OKAY [ 0.587s]
sending 'recovery' (4308 KB)...
OKAY [ 0.567s]
writing 'recovery'...
OKAY [ 0.638s]
sending 'system' (337443 KB)...
OKAY [ 43.476s]
writing 'system'...
FAILED (remote: Write Fail)
finished. total time: 45.956s
Press any key to exit...
I've had a similar experience when installing stock ROMs after installing cwm and cm 10. Can you guys not even install cm10?
Sent from my Nexus S using xda app-developers app
Deus Tempestas said:
I have the same problem, can't write a system img to the phone
FASTBOOT STATUS - FAILWrite Fail
I have TWRP but it would not do anything to the system partition.
I tried to flash the stock rom
soju-jzo54k
I ran the flash-all.bat
this is the output
sending 'bootloader' (1536 KB)...
OKAY [ 0.215s]
writing 'bootloader'...
OKAY [ 0.385s]
finished. total time: 0.601s
rebooting into bootloader...
OKAY [ 0.001s]
finished. total time: 0.001s
< waiting for device >
sending 'radio' (12288 KB)...
OKAY [ 1.601s]
writing 'radio'...
OKAY [ 1.919s]
finished. total time: 3.520s
rebooting into bootloader...
OKAY [ 0.001s]
finished. total time: 0.001s
< waiting for device >
archive does not contain 'boot.sig'
archive does not contain 'recovery.sig'
archive does not contain 'system.sig'
--------------------------------------------
Bootloader Version...: I9020XXLC2
Baseband Version.....: I9020XXKI1
Serial Number........: 33304BC024EC00EC
--------------------------------------------
checking product...
OKAY [ -0.000s]
checking version-bootloader...
OKAY [ 0.001s]
checking version-baseband...
OKAY [ 0.001s]
sending 'boot' (3964 KB)...
OKAY [ 0.542s]
writing 'boot'...
OKAY [ 0.587s]
sending 'recovery' (4308 KB)...
OKAY [ 0.567s]
writing 'recovery'...
OKAY [ 0.638s]
sending 'system' (337443 KB)...
OKAY [ 43.476s]
writing 'system'...
FAILED (remote: Write Fail)
finished. total time: 45.956s
Press any key to exit...
Click to expand...
Click to collapse
Same problem here! Did u find solution?
Hi all,
My moto g has a problem. It is stuck at the "warning bootloader unlocked screen"
I can boot into fastboot and flash stuff but when i try to boot it keeps displaying the "warning bootloader unlocked screen"
i have tryed several guides to flash orignal firmware but somehow it doesnt work.
Stange thing is is that i have CMW installed but when i flash TWRP or something it says its ok but then when i go to recovery CMW always comes back.
Had the same problem, white boot logo. Download from here http://forum.xda-developers.com/showthread.php?t=2646415 During the process it will say something about boot loader, but never mind. U should have a OTA update when it finished and will lose root, but its not a big problem
regards
bobrda said:
Had the same problem, white boot logo. Download from here http://forum.xda-developers.com/showthread.php?t=2646415 During the process it will say something about boot loader, but never mind. U should have a OTA update when it finished and will lose root, but its not a big problem
regards
Click to expand...
Click to collapse
Yeah i tryed that one but it doesnt work even the logo doesnt work.
Beukhof1 said:
Yeah i tryed that one but it doesnt work even the logo doesnt work.
Click to expand...
Click to collapse
Maybe to try this one? Its the GPE rom but it may fix the phone .. http://forum.xda-developers.com/showthread.php?t=2646404
bobrda said:
Maybe to try this one? Its the GPE rom but it may fix the phone .. http://forum.xda-developers.com/showthread.php?t=2646404
Click to expand...
Click to collapse
Same thing its says its all ok but when i boot i just keeps showing the logo.
Code:
C:\Users\beukhof1\Downloads\GPE_XT1032_KOT49H.M004_CFC.xml>SET fastboot=fastboot
.exe
C:\Users\beukhof1\Downloads\GPE_XT1032_KOT49H.M004_CFC.xml>fastboot.exe getvar m
ax-sparse-size
max-sparse-size: 268435456
finished. total time: 0.002s
C:\Users\beukhof1\Downloads\GPE_XT1032_KOT49H.M004_CFC.xml>fastboot.exe oem fb_m
ode_set
... FAILED (remote failure)
finished. total time: 0.036s
C:\Users\beukhof1\Downloads\GPE_XT1032_KOT49H.M004_CFC.xml>fastboot.exe flash pa
rtition gpt.bin
sending 'partition' (32 KB)... OKAY [ 0.081s]
writing 'partition'... INFOThis may take a few seconds, if a
INFOdifferent partition table is being
INFOflashed since we need to backup
INFOand restore a few partitions
INFOFlashing primary GPT image...
INFOFlashing backup GPT image...
OKAY [ 0.469s]
finished. total time: 0.550s
C:\Users\beukhof1\Downloads\GPE_XT1032_KOT49H.M004_CFC.xml>fastboot.exe flash mo
toboot motoboot.img
sending 'motoboot' (1940 KB)... OKAY [ 0.205s]
writing 'motoboot'... INFOflashing tz ...
INFOflashing rpm ...
INFOflashing sdi ...
INFOflashing aboot ...
INFOflashing sbl1 ...
OKAY [ 1.380s]
finished. total time: 1.586s
C:\Users\beukhof1\Downloads\GPE_XT1032_KOT49H.M004_CFC.xml>fastboot.exe flash mo
dem NON-HLOS.bin
sending 'modem' (47484 KB)... OKAY [ 4.088s]
writing 'modem'... OKAY [ 0.732s]
finished. total time: 4.820s
C:\Users\beukhof1\Downloads\GPE_XT1032_KOT49H.M004_CFC.xml>fastboot.exe flash fs
g fsg.mbn
sending 'fsg' (719 KB)... OKAY [ 0.109s]
writing 'fsg'... OKAY [ 0.032s]
finished. total time: 0.142s
C:\Users\beukhof1\Downloads\GPE_XT1032_KOT49H.M004_CFC.xml>fastboot.exe erase mo
demst1
erasing 'modemst1'... OKAY [ 0.035s]
finished. total time: 0.035s
C:\Users\beukhof1\Downloads\GPE_XT1032_KOT49H.M004_CFC.xml>fastboot.exe erase mo
demst2
erasing 'modemst2'... OKAY [ 0.046s]
finished. total time: 0.046s
C:\Users\beukhof1\Downloads\GPE_XT1032_KOT49H.M004_CFC.xml>fastboot.exe flash lo
go logo.bin
sending 'logo' (2563 KB)... OKAY [ 0.271s]
writing 'logo'... OKAY [ 0.085s]
finished. total time: 0.356s
C:\Users\beukhof1\Downloads\GPE_XT1032_KOT49H.M004_CFC.xml>fastboot.exe flash bo
ot boot.img
sending 'boot' (10240 KB)... OKAY [ 0.896s]
writing 'boot'... OKAY [ 0.731s]
finished. total time: 1.627s
C:\Users\beukhof1\Downloads\GPE_XT1032_KOT49H.M004_CFC.xml>fastboot.exe flash re
covery recovery.img
sending 'recovery' (10240 KB)... OKAY [ 0.897s]
writing 'recovery'... OKAY [ 0.729s]
finished. total time: 1.626s
C:\Users\beukhof1\Downloads\GPE_XT1032_KOT49H.M004_CFC.xml>fastboot.exe flash sy
stem system.img_sparsechunk1
sending 'system' (248834 KB)... OKAY [ 21.396s]
writing 'system'... INFOInvalid signed image
OKAY [ 4.452s]
finished. total time: 25.848s
C:\Users\beukhof1\Downloads\GPE_XT1032_KOT49H.M004_CFC.xml>fastboot.exe flash sy
stem system.img_sparsechunk2
sending 'system' (253442 KB)... OKAY [ 23.077s]
writing 'system'... INFOFailed to validate sparse image
OKAY [ 4.052s]
finished. total time: 27.131s
C:\Users\beukhof1\Downloads\GPE_XT1032_KOT49H.M004_CFC.xml>fastboot.exe flash sy
stem system.img_sparsechunk3
sending 'system' (210534 KB)... OKAY [ 19.748s]
writing 'system'... INFOFailed to validate sparse image
OKAY [ 3.446s]
finished. total time: 23.195s
C:\Users\beukhof1\Downloads\GPE_XT1032_KOT49H.M004_CFC.xml>fastboot.exe erase ca
che
erasing 'cache'... OKAY [ 0.014s]
finished. total time: 0.015s
C:\Users\beukhof1\Downloads\GPE_XT1032_KOT49H.M004_CFC.xml>fastboot.exe erase us
erdata
erasing 'userdata'... OKAY [ 0.036s]
finished. total time: 0.037s
C:\Users\beukhof1\Downloads\GPE_XT1032_KOT49H.M004_CFC.xml>fastboot.exe oem fb_m
ode_clear
... OKAY [ 0.021s]
finished. total time: 0.022s
C:\Users\beukhof1\Downloads\GPE_XT1032_KOT49H.M004_CFC.xml>pause
Press any key to continue . . .
Beukhof1 said:
Same thing its says its all ok but when i boot i just keeps showing the logo.
Code:
C:\Users\beukhof1\Downloads\GPE_XT1032_KOT49H.M004_CFC.xml>SET fastboot=fastboot
.exe
C:\Users\beukhof1\Downloads\GPE_XT1032_KOT49H.M004_CFC.xml>fastboot.exe getvar m
ax-sparse-size
max-sparse-size: 268435456
finished. total time: 0.002s
C:\Users\beukhof1\Downloads\GPE_XT1032_KOT49H.M004_CFC.xml>fastboot.exe oem fb_m
ode_set
... FAILED (remote failure)
finished. total time: 0.036s
Sorry I cant help you than. This two rooms work on my phone.. talking about xt 1032
C:\Users\beukhof1\Downloads\GPE_XT1032_KOT49H.M004_CFC.xml>fastboot.exe flash pa
rtition gpt.bin
sending 'partition' (32 KB)... OKAY [ 0.081s]
writing 'partition'... INFOThis may take a few seconds, if a
INFOdifferent partition table is being
INFOflashed since we need to backup
INFOand restore a few partitions
INFOFlashing primary GPT image...
INFOFlashing backup GPT image...
OKAY [ 0.469s]
finished. total time: 0.550s
C:\Users\beukhof1\Downloads\GPE_XT1032_KOT49H.M004_CFC.xml>fastboot.exe flash mo
toboot motoboot.img
sending 'motoboot' (1940 KB)... OKAY [ 0.205s]
writing 'motoboot'... INFOflashing tz ...
INFOflashing rpm ...
INFOflashing sdi ...
INFOflashing aboot ...
INFOflashing sbl1 ...
OKAY [ 1.380s]
finished. total time: 1.586s
C:\Users\beukhof1\Downloads\GPE_XT1032_KOT49H.M004_CFC.xml>fastboot.exe flash mo
dem NON-HLOS.bin
sending 'modem' (47484 KB)... OKAY [ 4.088s]
writing 'modem'... OKAY [ 0.732s]
finished. total time: 4.820s
C:\Users\beukhof1\Downloads\GPE_XT1032_KOT49H.M004_CFC.xml>fastboot.exe flash fs
g fsg.mbn
sending 'fsg' (719 KB)... OKAY [ 0.109s]
writing 'fsg'... OKAY [ 0.032s]
finished. total time: 0.142s
C:\Users\beukhof1\Downloads\GPE_XT1032_KOT49H.M004_CFC.xml>fastboot.exe erase mo
demst1
erasing 'modemst1'... OKAY [ 0.035s]
finished. total time: 0.035s
C:\Users\beukhof1\Downloads\GPE_XT1032_KOT49H.M004_CFC.xml>fastboot.exe erase mo
demst2
erasing 'modemst2'... OKAY [ 0.046s]
finished. total time: 0.046s
C:\Users\beukhof1\Downloads\GPE_XT1032_KOT49H.M004_CFC.xml>fastboot.exe flash lo
go logo.bin
sending 'logo' (2563 KB)... OKAY [ 0.271s]
writing 'logo'... OKAY [ 0.085s]
finished. total time: 0.356s
C:\Users\beukhof1\Downloads\GPE_XT1032_KOT49H.M004_CFC.xml>fastboot.exe flash bo
ot boot.img
sending 'boot' (10240 KB)... OKAY [ 0.896s]
writing 'boot'... OKAY [ 0.731s]
finished. total time: 1.627s
C:\Users\beukhof1\Downloads\GPE_XT1032_KOT49H.M004_CFC.xml>fastboot.exe flash re
covery recovery.img
sending 'recovery' (10240 KB)... OKAY [ 0.897s]
writing 'recovery'... OKAY [ 0.729s]
finished. total time: 1.626s
C:\Users\beukhof1\Downloads\GPE_XT1032_KOT49H.M004_CFC.xml>fastboot.exe flash sy
stem system.img_sparsechunk1
sending 'system' (248834 KB)... OKAY [ 21.396s]
writing 'system'... INFOInvalid signed image
OKAY [ 4.452s]
finished. total time: 25.848s
C:\Users\beukhof1\Downloads\GPE_XT1032_KOT49H.M004_CFC.xml>fastboot.exe flash sy
stem system.img_sparsechunk2
sending 'system' (253442 KB)... OKAY [ 23.077s]
writing 'system'... INFOFailed to validate sparse image
OKAY [ 4.052s]
finished. total time: 27.131s
C:\Users\beukhof1\Downloads\GPE_XT1032_KOT49H.M004_CFC.xml>fastboot.exe flash sy
stem system.img_sparsechunk3
sending 'system' (210534 KB)... OKAY [ 19.748s]
writing 'system'... INFOFailed to validate sparse image
OKAY [ 3.446s]
finished. total time: 23.195s
C:\Users\beukhof1\Downloads\GPE_XT1032_KOT49H.M004_CFC.xml>fastboot.exe erase ca
che
erasing 'cache'... OKAY [ 0.014s]
finished. total time: 0.015s
C:\Users\beukhof1\Downloads\GPE_XT1032_KOT49H.M004_CFC.xml>fastboot.exe erase us
erdata
erasing 'userdata'... OKAY [ 0.036s]
finished. total time: 0.037s
C:\Users\beukhof1\Downloads\GPE_XT1032_KOT49H.M004_CFC.xml>fastboot.exe oem fb_m
ode_clear
... OKAY [ 0.021s]
finished. total time: 0.022s
C:\Users\beukhof1\Downloads\GPE_XT1032_KOT49H.M004_CFC.xml>pause
Press any key to continue . . .
Click to expand...
Click to collapse
Sorry I cant help you. It works on my phone. model xt 1032
bobrda said:
Sorry I cant help you. It works on my phone. model xt 1032
Click to expand...
Click to collapse
I have the same model
Beukhof1 said:
I have the same model
Click to expand...
Click to collapse
Don't know whats couching you the problem. try to push rom via adb
or maybe this one http://forum.xda-developers.com/showthread.php?t=2542219
i had no success with this rom, but...
it's beyond my knowledge
bobrda said:
Don't know whats couching you the problem. try to push rom via adb
or maybe this one http://forum.xda-developers.com/showthread.php?t=2542219
i had no success with this rom, but...
it's beyond my knowledge
Click to expand...
Click to collapse
Every thing i flash even recovery doesnt seem to stick because when i fastboot twrp i still have my cmw.
Beukhof1 said:
Every thing i flash even recovery doesnt seem to stick because when i fastboot twrp i still have my cmw.
Click to expand...
Click to collapse
Few dayes ago i download Gb 4.4.2 rom and flash it with no mistakes thru the flash! It have no errors while flashing. After that had a update to 176.44.1
So my phone is for European market and with sparsechunk.0 sparsechunk.1 sparsechunk.2 have no errors. With 1.2.and 3sparsechunk i have errors, but i can but in the rom normally...
Then i use a mototool 3 and root my phone with twrp recovery...
Beukhof1 said:
Hi all,
My moto g has a problem. It is stuck at the "warning bootloader unlocked screen"
I can boot into fastboot and flash stuff but when i try to boot it keeps displaying the "warning bootloader unlocked screen"
i have tryed several guides to flash orignal firmware but somehow it doesnt work.
Stange thing is is that i have CMW installed but when i flash TWRP or something it says its ok but then when i go to recovery CMW always comes back.
Click to expand...
Click to collapse
Did you manage to get a fix for this? I have the exact same issue, did all the steps you mentioned and have not found a fix, did you hace any luck?
Iggyavendano said:
Did you manage to get a fix for this? I have the exact same issue, did all the steps you mentioned and have not found a fix, did you hace any luck?
Click to expand...
Click to collapse
Nope sorry man. Mine is stille dead. I think the flash memory is defectieve.
Beukhof1 said:
Nope sorry man. Mine is stille dead. I think the flash memory is defectieve.
Click to expand...
Click to collapse
I went back to my carrier rom and It worked... after a few flashes on lollipop I couldn't get it to work even on stock lollipop...
hope it helps.
Try with mfastboot-v2. You can find the link with a quick search. mfastboot may help with flashing larger system images than normal fastboot. Just give it a try.
And if you are on lollipop & trying to downgrade to kitkat, skip flashing motoboot.img & gpt.bin
legolas06 said:
Try with mfastboot-v2. You can find the link with a quick search. mfastboot may help with flashing larger system images than normal fastboot. Just give it a try.
And if you are on lollipop & trying to downgrade to kitkat, skip flashing motoboot.img & gpt.bin
Click to expand...
Click to collapse
I had the same problem, and tried everithing said here, the only thing that worked, was mfastboot - v2, thank a lot for the sugestion.
Device not seen
I'm having the same problem – stuck on "Warning Booloader Unlocked" screen. Can't get to the bootloader screen. 'adb devices' and 'mfastboot devices' both show empty device lists, which means that I can't execute any adb or mfastboot commands...
Moto G XT1032 (Gen 1, 2013), attempted to install 5.1 firmware using steps at www . droidviews . com/restore-moto-g-to-stock-and-downgrade-firmware (sorry, not allowed to add live link). Bootloader unlocked, USB drivers installed, USB debugging enabled. All mfastboot steps executed without error, but I missed sparsechunk.0 – duh. Finished with a 'mfastboot reboot', and ever since, can't get past the bootloader warning, and no device seen by adb or mfastboot... Can't imagine it's a connectivity or PC driver issue, as was working fine minutes ago before the reboot.
All the solutions I've found depend on adb or mfastboot being able to see my device. Any tips to get the device seen again?
Thanks!
aussiejim said:
I'm having the same problem – stuck on "Warning Booloader Unlocked" screen. Can't get to the bootloader screen. 'adb devices' and 'mfastboot devices' both show empty device lists, which means that I can't execute any adb or mfastboot commands...
Moto G XT1032 (Gen 1, 2013), attempted to install 5.1 firmware using steps at www . droidviews . com/restore-moto-g-to-stock-and-downgrade-firmware (sorry, not allowed to add live link). Bootloader unlocked, USB drivers installed, USB debugging enabled. All mfastboot steps executed without error, but I missed sparsechunk.0 – duh. Finished with a 'mfastboot reboot', and ever since, can't get past the bootloader warning, and no device seen by adb or mfastboot... Can't imagine it's a connectivity or PC driver issue, as was working fine minutes ago before the reboot.
All the solutions I've found depend on adb or mfastboot being able to see my device. Any tips to get the device seen again?
Thanks!
Click to expand...
Click to collapse
Problem solved – eventually got into bootloader screen on phone, after at least 20 tries... If you have same problem, keep on trying.
I have a Razr HD (my dad's) he took the newest update last week and now he is stuck at the boot logo.(I have told him to not do it) ADB screen is telling me it is unlocked at stats code 3, (I think a dev edition, he bought it used) now I can't get it to take a recovery to flash stock 4.4.2. I tried this script here (http://forum.xda-developers.com/showthread.php?t=2474393) but it wouldn't restore it to stock and let me use the phone.
Any ideas from the android gurus.
Latheman said:
I have a Razr HD (my dad's) he took the newest update last week and now he is stuck at the boot logo.(I have told him to not do it) ADB screen is telling me it is unlocked at stats code 3, (I think a dev edition, he bought it used) now I can't get it to take a recovery to flash stock 4.4.2. I tried this script here (http://forum.xda-developers.com/showthread.php?t=2474393) but it wouldn't restore it to stock and let me use the phone.
Any ideas from the android gurus.
Click to expand...
Click to collapse
is this a 926 or 925
if 926
use rsd lite and this guide form @SamuriHL http://forum.xda-developers.com/droid-razr-hd/general/fxz-4-4-2-183-46-15-t2873083 i would recommend the full script since you are already unlocked and it was a used phone
if 925
same procedure but with the correct sbf from http://sbf.droid-developers.org/
I did this earlier. Same problem
Latheman said:
I did this earlier. Same problem
Click to expand...
Click to collapse
try this utility. it is a special version to fix certain issues that cant be fixed with fastboot and rsd.
watch the dialog and let me know if any operations fail, or copy and paste the output here for me to see.
i may have to update it for you if a couple specific things fail.
windows or linux?
Latheman said:
windows or linux?
Click to expand...
Click to collapse
windows only
---------- Post added at 05:57 PM ---------- Previous post was at 05:56 PM ----------
Latheman said:
windows or linux?
Click to expand...
Click to collapse
flash in fastboot same as the rest.
OK thanks. give me 10 minuets
this phone has the 9/9/14 update that won't be a problem right? just making sure
Latheman said:
this phone has the 9/9/14 update that won't be a problem right? just making sure
Click to expand...
Click to collapse
it wont be a problem, but some parts will fail. im downloading the files now to compare the parts i would like to see work.
either way, try that for now and let me know how it goes. there should be no added danger, the trust zone and partition files are what could fail, neither can be downgraded, so i dont see it making things worse if it doesnt work.
the phone says update gpt-main partition failed then the terminal end is FAILED (remote failure)
here is the output on the computer, sorry it is so long
[*] Simple Razr Restore
[*] Windows Version
[*] Created by mattlgroff
[*] Maintained by bweN diorD
[*] Before continuing, ensure your device is in the
[*] "AP Fastboot" mode and connected via USB.
[*] Be VERY aware! This WILL wipe your userdata, including contacts, apps, etc.
[*] I am not responsible if this wipes your internal sdcard, and you should
[*] backup anything worth it to you to your external sdcard and computer before
[*] you choose to continue. You can exit now with the X button on this window.
[*] WARNING: Do not do this at LOW BATTERY! You have been warned!
[*]
[*] This script will also wipe your data (did i mention this will wipe your data
?).
[*] Press any key to continue.
sending 'partition' (32 KB)...
OKAY [ 0.016s]
writing 'partition'...
FAILED (remote failure)
finished. total time: 0.156s
sending 'sbl1' (101 KB)...
OKAY [ 0.031s]
writing 'sbl1'...
Failed to erase partition
Failed to flash partition sbl1
FAILED (remote failure)
finished. total time: 0.187s
sending 'sbl2' (126 KB)...
OKAY [ 0.031s]
writing 'sbl2'...
Failed to erase partition
Failed to flash partition sbl2
FAILED (remote failure)
finished. total time: 0.172s
sending 'sbl3' (512 KB)...
OKAY [ 0.062s]
writing 'sbl3'...
Failed to erase partition
Failed to flash partition sbl3
FAILED (remote failure)
finished. total time: 0.370s
sending 'rpm' (140 KB)...
OKAY [ 0.029s]
writing 'rpm'...
Failed to erase partition
Failed to flash partition rpm
FAILED (remote failure)
finished. total time: 0.315s
sending 'tz' (210 KB)...
OKAY [ 0.036s]
writing 'tz'...
Preflash validation failed
FAILED (remote failure)
finished. total time: 0.200s
sending 'aboot' (256 KB)...
OKAY [ 0.039s]
writing 'aboot'...
Failed to erase partition
Failed to flash partition aboot
FAILED (remote failure)
finished. total time: 0.346s
sending 'modem' (30720 KB)...
OKAY [ 2.299s]
writing 'modem'...
Failed to erase partition
Failed to erase partition
Failed to write mmc
FAILED (remote failure)
finished. total time: 2.464s
sending 'fsg' (165 KB)...
OKAY [ 0.032s]
writing 'fsg'...
Failed to erase partition
Failed to flash partition fsg
FAILED (remote failure)
finished. total time: 0.187s
erasing 'modemst1'...
Failed to erase partition
FAILED (remote failure)
finished. total time: 0.083s
erasing 'modemst2'...
Failed to erase partition
FAILED (remote failure)
finished. total time: 0.084s
sending 'logo' (854 KB)...
OKAY [ 0.083s]
writing 'logo'...
Failed to erase partition
Failed to flash partition logo
FAILED (remote failure)
finished. total time: 0.238s
sending 'boot' (10240 KB)...
OKAY [ 0.781s]
writing 'boot'...
Failed to erase partition
Failed to flash partition boot
FAILED (remote failure)
finished. total time: 0.929s
sending 'recovery' (10240 KB)...
OKAY [ 0.805s]
writing 'recovery'...
Failed to erase partition
Failed to flash partition recovery
FAILED (remote failure)
finished. total time: 0.969s
erasing 'userdata'...
Failed to erase partition
FAILED (remote failure)
finished. total time: 0.084s
sending 'system' (30720 KB)...
OKAY [ 2.357s]
writing 'system'...
Failed to erase partition
FAILED (remote failure)
finished. total time: 2.447s
erasing 'tombstones'...
Failed to erase partition
FAILED (remote failure)
finished. total time: 0.084s
erasing 'cache'...
Failed to erase partition
FAILED (remote failure)
finished. total time: 0.188s
[*] Flash complete, Rebooting...
rebooting...
finished. total time: 0.009s
Hit ENTER to return.
Latheman said:
here is the output on the computer, sorry it is so long
Click to expand...
Click to collapse
dammm
my file is almost done, let me compare a couple md5's from the old update and ill get right back to ya with what it looks like.
---------- Post added at 06:35 PM ---------- Previous post was at 06:24 PM ----------
@Latheman
ok, they changed the partition table again, not saying the phone is fixable, but this is the best chance i could have wanted to fix it.
its going to take me 1/2 hour to fix the script, and an hour (barring issue) to upload it.
ill send it over as soon as its done, if not tonight, then tomorrow.
Thank-you
Latheman said:
Thank-you
Click to expand...
Click to collapse
test flash on my updated phone, only tz failed because i removed it, but will be in your version as you already took it.
[*] Simple Razr Restore
[*] Windows Version
[*] Created by mattlgroff
[*] Maintained by bweN diorD
[*] Before continuing, ensure your device is in the
[*] "AP Fastboot" mode and connected via USB.
[*] WARNING: Do not do this at LOW BATTERY! You have been warned!
[*]
[*] Press any key to continue.
sending 'partition' (32 KB)...
OKAY [ 0.015s]
writing 'partition'...
This may take a few seconds, if a
different partition table is being
flashed since we need to backup
and restore a few partitions
OKAY [ 0.859s]
finished. total time: 0.874s
sending 'sbl1' (101 KB)...
OKAY [ 0.019s]
writing 'sbl1'...
OKAY [ 0.648s]
finished. total time: 0.668s
sending 'sbl2' (127 KB)...
OKAY [ 0.183s]
writing 'sbl2'...
OKAY [ 1.033s]
finished. total time: 1.216s
sending 'sbl3' (512 KB)...
OKAY [ 0.052s]
writing 'sbl3'...
OKAY [ 1.113s]
finished. total time: 1.165s
sending 'rpm' (140 KB)...
OKAY [ 0.023s]
writing 'rpm'...
OKAY [ 0.473s]
finished. total time: 0.496s
error: cannot load 'tz.mbn'
sending 'aboot' (256 KB)...
OKAY [ 0.193s]
writing 'aboot'...
OKAY [ 1.594s]
finished. total time: 1.788s
sending 'modem' (30720 KB)...
OKAY [ 2.320s]
writing 'modem'...
OKAY [ 2.680s]
sending 'modem' (19212 KB)...
OKAY [ 3.845s]
writing 'modem'...
OKAY [ 1.095s]
finished. total time: 9.944s
sending 'fsg' (165 KB)...
OKAY [ 0.027s]
writing 'fsg'...
OKAY [ 0.855s]
finished. total time: 0.882s
erasing 'modemst1'...
OKAY [ 1.698s]
finished. total time: 1.699s
erasing 'modemst2'...
OKAY [ 1.232s]
finished. total time: 1.232s
sending 'logo' (854 KB)...
OKAY [ 0.076s]
writing 'logo'...
OKAY [ 1.955s]
finished. total time: 2.032s
sending 'boot' (10240 KB)...
OKAY [ 0.784s]
writing 'boot'...
OKAY [ 5.946s]
finished. total time: 6.730s
sending 'recovery' (10240 KB)...
OKAY [ 0.781s]
writing 'recovery'...
OKAY [ 4.749s]
finished. total time: 5.530s
sending 'system' (30720 KB)...
OKAY [ 2.324s]
writing 'system'...
OKAY [ 2.254s]
sending 'system' (30720 KB)...
OKAY [ 5.467s]
writing 'system'...
OKAY [ 0.019s]
sending 'system' (30720 KB)...
OKAY [ 4.717s]
writing 'system'...
OKAY [ 0.019s]
sending 'system' (30720 KB)...
OKAY [ 4.697s]
writing 'system'...
OKAY [ 0.019s]
sending 'system' (30720 KB)...
OKAY [ 4.707s]
writing 'system'...
OKAY [ 0.019s]
sending 'system' (30720 KB)...
OKAY [ 5.223s]
writing 'system'...
OKAY [ 0.015s]
sending 'system' (30720 KB)...
OKAY [ 4.727s]
writing 'system'...
OKAY [ 0.019s]
sending 'system' (30720 KB)...
OKAY [ 4.707s]
writing 'system'...
OKAY [ 0.019s]
sending 'system' (30720 KB)...
OKAY [ 4.712s]
writing 'system'...
OKAY [ 0.020s]
sending 'system' (30720 KB)...
OKAY [ 4.983s]
writing 'system'...
OKAY [ 0.020s]
sending 'system' (30720 KB)...
OKAY [ 4.718s]
writing 'system'...
OKAY [ 0.019s]
sending 'system' (30720 KB)...
OKAY [ 4.729s]
writing 'system'...
OKAY [ 0.021s]
sending 'system' (30720 KB)...
OKAY [ 4.646s]
writing 'system'...
OKAY [ 0.023s]
sending 'system' (30720 KB)...
OKAY [ 5.097s]
writing 'system'...
OKAY [ 0.021s]
sending 'system' (30720 KB)...
OKAY [ 5.140s]
writing 'system'...
OKAY [ 0.019s]
sending 'system' (30720 KB)...
OKAY [ 4.697s]
writing 'system'...
OKAY [ 0.021s]
sending 'system' (30720 KB)...
OKAY [ 4.662s]
writing 'system'...
OKAY [ 0.021s]
sending 'system' (30720 KB)...
OKAY [ 4.712s]
writing 'system'...
OKAY [ 0.019s]
sending 'system' (30720 KB)...
OKAY [ 5.067s]
writing 'system'...
OKAY [ 0.020s]
sending 'system' (30720 KB)...
OKAY [ 4.677s]
writing 'system'...
OKAY [ 0.019s]
sending 'system' (30720 KB)...
OKAY [ 4.682s]
writing 'system'...
OKAY [ 0.019s]
sending 'system' (30720 KB)...
OKAY [ 4.696s]
writing 'system'...
OKAY [ 0.020s]
sending 'system' (30720 KB)...
OKAY [ 5.232s]
writing 'system'...
OKAY [ 0.019s]
sending 'system' (30720 KB)...
OKAY [ 4.717s]
writing 'system'...
OKAY [ 0.020s]
sending 'system' (30720 KB)...
OKAY [ 4.636s]
writing 'system'...
OKAY [ 0.019s]
sending 'system' (30720 KB)...
OKAY [ 4.703s]
writing 'system'...
OKAY [ 0.020s]
sending 'system' (30720 KB)...
OKAY [ 4.750s]
writing 'system'...
OKAY [ 0.019s]
sending 'system' (30720 KB)...
OKAY [ 4.715s]
writing 'system'...
OKAY [ 0.020s]
sending 'system' (30720 KB)...
OKAY [ 4.701s]
writing 'system'...
OKAY [ 0.020s]
sending 'system' (30720 KB)...
OKAY [ 4.703s]
writing 'system'...
OKAY [ 0.020s]
sending 'system' (30720 KB)...
OKAY [ 5.604s]
writing 'system'...
OKAY [ 0.020s]
sending 'system' (30720 KB)...
OKAY [ 4.694s]
writing 'system'...
OKAY [ 0.018s]
sending 'system' (30720 KB)...
OKAY [ 4.708s]
writing 'system'...
OKAY [ 0.018s]
sending 'system' (30720 KB)...
OKAY [ 4.710s]
writing 'system'...
OKAY [ 0.019s]
sending 'system' (30720 KB)...
OKAY [ 5.034s]
writing 'system'...
OKAY [ 0.019s]
sending 'system' (30720 KB)...
OKAY [ 4.686s]
writing 'system'...
OKAY [ 0.020s]
sending 'system' (21722 KB)...
OKAY [ 4.040s]
writing 'system'...
OKAY [ 1.323s]
finished. total time: 285.670s
erasing 'tombstones'...
OKAY [ 2.049s]
finished. total time: 2.049s
erasing 'cache'...
OKAY [ 2.632s]
finished. total time: 2.632s
[*] Flash complete, Rebooting...
rebooting...
finished. total time: 0.005s
Hit ENTER to return.
so what should I do? remove a file from the folder you sent me?
Latheman said:
so what should I do? remove a file from the folder you sent me?
Click to expand...
Click to collapse
no, i was just showing you the new version is built, tested, working and uploading now.
so, when i post it later for you to try, this is pretty much a last resort script. if it doesn't work for you, the phone is likely gone.
---------- Post added at 07:42 PM ---------- Previous post was at 07:05 PM ----------
Latheman said:
so what should I do? remove a file from the folder you sent me?
Click to expand...
Click to collapse
ok she is done
http://www.mediafire.com/download/5mmd0jv84c51rvt/DROID_RAZR_HD_Utility_1.4gpt-2a_KK.rar
edit: just changed the download link to another version containing the tz file i forgot to replace, for whoever might need it in the future.
Thanks I'll try it soon.
Latheman said:
Thanks I'll try it soon.
Click to expand...
Click to collapse
i forgot to drop the tz file back in before i uploaded it, its no big deal and shouldnt matter, but you should drop this into the directory in the rare event it becomes needed.
https://www.dropbox.com/s/f27cfsjyewlnlu4/tz.mbn?dl=0
I tried it, and no soap, I think this one is a loss . (first one of every phone I have worked on). the BL is still unlocked so if anybody ever comes up with something in the future, or I can put something together I might be able to restore it.
Did you try to flash stock with rsd 6.1.5 and editing xml file, say removing tz line
I flashed the XT1031 Boost Mobile bootloader on my C Spire phone and can't get service on my carrier anymore. Does anyone know how to fix it?
@Matthew931 - I'm assuming you mean you flashed the XT1031 Firmware Image. The only other firmware image for XT1031 is Republic Wireless US. I suspect C-Spire and Republic Wireless are the same.
Download and Tutorial available here:
http://forum.xda-developers.com/moto-g/general/index-moto-g-falcon-factory-firmware-t3110795
I recommend you do the fastboot commands manually, one at a time, and report back here with a log if you have problems. I also suggest you leave your current Bootloader alone, and therefore do not include the following fastboot command:
fastboot flash motoboot motoboot.img
I flashed the Boost Mobile lollipop bootloader thinking it wouldn't hurt they are the same model but i cant get service anymore so im guessing its trying to connect to boost and they don't have service in my area. I will try this thank you.
It didn't work my WIFI stopped working
Matthew931 said:
It didn't work my WIFI stopped working
Click to expand...
Click to collapse
Please provide a full and complete log of you doing the mfastboot commands.
I got it working sorta it only connects to boost towers now do you know how to change the system to connect to C Spire I have the APN information for them but I don't know how to make android use it
http://ian.mcxa.org/2015/01/03/manually-configure-sprint-apns-lollipop.html
I can't access the APN setting do you know a way to open then I don't have voice dialer and the ADB command just brings up help unless im using it wrong
Matthew931 said:
I can't access the APN setting do you know a way to open then I don't have voice dialer and the ADB command just brings up help unless im using it wrong
Click to expand...
Click to collapse
It would be helpful if you would describe more clearly what you mean. Is the setting listed, but grayed out?
QuickShortcutMaker is one way to directly access settings - In the app, change 'Incremental search' to 'Normal Search' - now search for: APN
The app worked I open the settings but they do not save
Matthew931 said:
The app worked I open the settings but they do not save
Click to expand...
Click to collapse
Are you running a Stock ROM or custom ROM? You really should reconsider flashing the Republic Wireless US factory firmware image, as it is probably an essential step.
I am on AOSP Android 5.1.1 I have a backup of the software that was on it when I bought it but it doesn't get service either. Do you want me to try using that?
Matthew931 said:
I am on AOSP Android 5.1.1 I have a backup of the software that was on it when I bought it but it doesn't get service either. Do you want me to try using that?
Click to expand...
Click to collapse
I want you to provide a log of what happens when you use fastboot to flash the Republic Wireless US factory firmware image.
lost101 said:
I want you to provide a log of what happens when you use fastboot to flash the Republic Wireless US factory firmware image.
Click to expand...
Click to collapse
ok will do that now
C:\Users\Matthew\Downloads\ACG_XT1031_4.4.2_KXB20.9-1.10-1.43_CFC_1FF.xml\ACG_XT
1031_4.4.2_KXB20.9-1.10-1.43_CFC_1FF.xml>mfastboot flash partition gpt.bin
'mfastboot' is not recognized as an internal or external command,
operable program or batch file.
C:\Users\Matthew\Downloads\ACG_XT1031_4.4.2_KXB20.9-1.10-1.43_CFC_1FF.xml\ACG_XT
1031_4.4.2_KXB20.9-1.10-1.43_CFC_1FF.xml>fastboot flash partition gpt.bin
target reported max download size of 536870912 bytes
sending 'partition' (32 KB)...
OKAY [ 0.029s]
writing 'partition'...
(bootloader) Preflash validation failed
FAILED (remote failure)
finished. total time: 0.322s
C:\Users\Matthew\Downloads\ACG_XT1031_4.4.2_KXB20.9-1.10-1.43_CFC_1FF.xml\ACG_XT
1031_4.4.2_KXB20.9-1.10-1.43_CFC_1FF.xml>fastboot flash logo logo.bin
target reported max download size of 536870912 bytes
sending 'logo' (619 KB)...
OKAY [ 0.074s]
writing 'logo'...
OKAY [ 0.101s]
finished. total time: 0.178s
C:\Users\Matthew\Downloads\ACG_XT1031_4.4.2_KXB20.9-1.10-1.43_CFC_1FF.xml\ACG_XT
1031_4.4.2_KXB20.9-1.10-1.43_CFC_1FF.xml>fastboot flash boot boot.img
target reported max download size of 536870912 bytes
sending 'boot' (10240 KB)...
OKAY [ 0.382s]
writing 'boot'...
OKAY [ 0.817s]
finished. total time: 1.200s
C:\Users\Matthew\Downloads\ACG_XT1031_4.4.2_KXB20.9-1.10-1.43_CFC_1FF.xml\ACG_XT
1031_4.4.2_KXB20.9-1.10-1.43_CFC_1FF.xml>fastboot flash recovery recovery.img
target reported max download size of 536870912 bytes
sending 'recovery' (10240 KB)...
OKAY [ 0.391s]
writing 'recovery'...
OKAY [ 0.808s]
finished. total time: 1.202s
C:\Users\Matthew\Downloads\ACG_XT1031_4.4.2_KXB20.9-1.10-1.43_CFC_1FF.xml\ACG_XT
1031_4.4.2_KXB20.9-1.10-1.43_CFC_1FF.xml>fastboot flash system system.img_sparse
chunk1
target reported max download size of 536870912 bytes
erasing 'system'...
(bootloader) Erase allowed in unlocked state
OKAY [ 0.255s]
sending 'system' (248502 KB)...
OKAY [ 8.223s]
writing 'system'...
OKAY [ 12.726s]
finished. total time: 21.211s
C:\Users\Matthew\Downloads\ACG_XT1031_4.4.2_KXB20.9-1.10-1.43_CFC_1FF.xml\ACG_XT
1031_4.4.2_KXB20.9-1.10-1.43_CFC_1FF.xml>fastboot flash system system.img_sparse
chunk2
target reported max download size of 536870912 bytes
erasing 'system'...
(bootloader) Erase allowed in unlocked state
OKAY [ 0.252s]
sending 'system' (251514 KB)...
OKAY [ 8.306s]
writing 'system'...
OKAY [ 12.078s]
finished. total time: 20.639s
C:\Users\Matthew\Downloads\ACG_XT1031_4.4.2_KXB20.9-1.10-1.43_CFC_1FF.xml\ACG_XT
1031_4.4.2_KXB20.9-1.10-1.43_CFC_1FF.xml>fastboot flash system system.img_sparse
chunk3
target reported max download size of 536870912 bytes
erasing 'system'...
(bootloader) Erase allowed in unlocked state
OKAY [ 0.261s]
sending 'system' (237909 KB)...
OKAY [ 7.870s]
writing 'system'...
OKAY [ 20.285s]
finished. total time: 28.418s
C:\Users\Matthew\Downloads\ACG_XT1031_4.4.2_KXB20.9-1.10-1.43_CFC_1FF.xml\ACG_XT
1031_4.4.2_KXB20.9-1.10-1.43_CFC_1FF.xml>fastboot flash modem NON-HLOS.bin
target reported max download size of 536870912 bytes
sending 'modem' (47484 KB)...
OKAY [ 1.611s]
writing 'modem'...
OKAY [ 1.626s]
finished. total time: 3.239s
C:\Users\Matthew\Downloads\ACG_XT1031_4.4.2_KXB20.9-1.10-1.43_CFC_1FF.xml\ACG_XT
1031_4.4.2_KXB20.9-1.10-1.43_CFC_1FF.xml>fastboot erase modemst1
erasing 'modemst1'...
OKAY [ 0.068s]
finished. total time: 0.069s
C:\Users\Matthew\Downloads\ACG_XT1031_4.4.2_KXB20.9-1.10-1.43_CFC_1FF.xml\ACG_XT
1031_4.4.2_KXB20.9-1.10-1.43_CFC_1FF.xml>fastboot erase modemst2
erasing 'modemst2'...
OKAY [ 0.067s]
finished. total time: 0.068s
C:\Users\Matthew\Downloads\ACG_XT1031_4.4.2_KXB20.9-1.10-1.43_CFC_1FF.xml\ACG_XT
1031_4.4.2_KXB20.9-1.10-1.43_CFC_1FF.xml>fastboot flash fsg fsg.mbn
target reported max download size of 536870912 bytes
sending 'fsg' (255 KB)...
OKAY [ 0.105s]
writing 'fsg'...
OKAY [ 5.270s]
finished. total time: 5.376s
C:\Users\Matthew\Downloads\ACG_XT1031_4.4.2_KXB20.9-1.10-1.43_CFC_1FF.xml\ACG_XT
1031_4.4.2_KXB20.9-1.10-1.43_CFC_1FF.xml>fastboot erase cache
******** Did you mean to fastboot format this partition?
erasing 'cache'...
OKAY [ 0.193s]
finished. total time: 0.194s
C:\Users\Matthew\Downloads\ACG_XT1031_4.4.2_KXB20.9-1.10-1.43_CFC_1FF.xml\ACG_XT
1031_4.4.2_KXB20.9-1.10-1.43_CFC_1FF.xml>fastboot erase userdata
erasing 'userdata'...
OKAY [ 0.506s]
finished. total time: 0.507s
C:\Users\Matthew\Downloads\ACG_XT1031_4.4.2_KXB20.9-1.10-1.43_CFC_1FF.xml\ACG_XT
1031_4.4.2_KXB20.9-1.10-1.43_CFC_1FF.xml>fastboot reboot
rebooting...
finished. total time: 0.002s
C:\Users\Matthew\Downloads\ACG_XT1031_4.4.2_KXB20.9-1.10-1.43_CFC_1FF.xml\ACG_XT
1031_4.4.2_KXB20.9-1.10-1.43_CFC_1FF.xml>
it won't go past bootloader unlocked now
Matthew931 said:
it won't go past bootloader unlocked now
Click to expand...
Click to collapse
You are not flashing the firmware image correctly.
Please mfastboot only. Do the commands manually, one at a time. Provide a new log.
https://www.androidfilehost.com/?fid=23578570567719065
It's starting now
C:\Users\Matthew\Downloads\ACG_XT1031_4.4.2_KXB20.9-1.10-1.43_CFC_1FF.xml\ACG_XT
1031_4.4.2_KXB20.9-1.10-1.43_CFC_1FF.xml>mfastboot flash partition gpt.bin
target max-sparse-size: 256MB
sending 'partition' (32 KB)...
OKAY [ 0.026s]
writing 'partition'...
(bootloader) Preflash validation failed
FAILED (remote failure)
finished. total time: 0.314s
C:\Users\Matthew\Downloads\ACG_XT1031_4.4.2_KXB20.9-1.10-1.43_CFC_1FF.xml\ACG_XT
1031_4.4.2_KXB20.9-1.10-1.43_CFC_1FF.xml>mfastboot flash logo logo.bin
target max-sparse-size: 256MB
sending 'logo' (619 KB)...
OKAY [ 0.050s]
writing 'logo'...
OKAY [ 0.094s]
finished. total time: 0.145s
C:\Users\Matthew\Downloads\ACG_XT1031_4.4.2_KXB20.9-1.10-1.43_CFC_1FF.xml\ACG_XT
1031_4.4.2_KXB20.9-1.10-1.43_CFC_1FF.xml>mfastboot flash boot boot.img
target max-sparse-size: 256MB
sending 'boot' (10240 KB)...
OKAY [ 0.378s]
writing 'boot'...
OKAY [ 0.791s]
finished. total time: 1.171s
C:\Users\Matthew\Downloads\ACG_XT1031_4.4.2_KXB20.9-1.10-1.43_CFC_1FF.xml\ACG_XT
1031_4.4.2_KXB20.9-1.10-1.43_CFC_1FF.xml>mfastboot flash recovery recovery.img
target max-sparse-size: 256MB
sending 'recovery' (10240 KB)...
OKAY [ 0.379s]
writing 'recovery'...
OKAY [ 0.795s]
finished. total time: 1.176s
C:\Users\Matthew\Downloads\ACG_XT1031_4.4.2_KXB20.9-1.10-1.43_CFC_1FF.xml\ACG_XT
1031_4.4.2_KXB20.9-1.10-1.43_CFC_1FF.xml>mfastboot flash system system.img_spars
echunk1
target max-sparse-size: 256MB
sending 'system' (248502 KB)...
OKAY [ 8.329s]
writing 'system'...
OKAY [ 12.768s]
finished. total time: 21.100s
C:\Users\Matthew\Downloads\ACG_XT1031_4.4.2_KXB20.9-1.10-1.43_CFC_1FF.xml\ACG_XT
1031_4.4.2_KXB20.9-1.10-1.43_CFC_1FF.xml>mfastboot flash system system.img_spars
echunk2
target max-sparse-size: 256MB
sending 'system' (251514 KB)...
OKAY [ 8.475s]
writing 'system'...
OKAY [ 12.103s]
finished. total time: 20.581s
C:\Users\Matthew\Downloads\ACG_XT1031_4.4.2_KXB20.9-1.10-1.43_CFC_1FF.xml\ACG_XT
1031_4.4.2_KXB20.9-1.10-1.43_CFC_1FF.xml>mfastboot flash system system.img_spars
echunk3
target max-sparse-size: 256MB
sending 'system' (237909 KB)...
OKAY [ 8.369s]
writing 'system'...
OKAY [ 20.263s]
finished. total time: 28.634s
C:\Users\Matthew\Downloads\ACG_XT1031_4.4.2_KXB20.9-1.10-1.43_CFC_1FF.xml\ACG_XT
1031_4.4.2_KXB20.9-1.10-1.43_CFC_1FF.xml>mfastboot flash modem NON-HLOS.bin
target max-sparse-size: 256MB
sending 'modem' (47484 KB)...
OKAY [ 1.629s]
writing 'modem'...
OKAY [ 1.627s]
finished. total time: 3.258s
C:\Users\Matthew\Downloads\ACG_XT1031_4.4.2_KXB20.9-1.10-1.43_CFC_1FF.xml\ACG_XT
1031_4.4.2_KXB20.9-1.10-1.43_CFC_1FF.xml>mfastboot erase modemst1
erasing 'modemst1'...
OKAY [ 0.025s]
finished. total time: 0.026s
C:\Users\Matthew\Downloads\ACG_XT1031_4.4.2_KXB20.9-1.10-1.43_CFC_1FF.xml\ACG_XT
1031_4.4.2_KXB20.9-1.10-1.43_CFC_1FF.xml>mfastboot erase modemst2
erasing 'modemst2'...
OKAY [ 0.053s]
finished. total time: 0.054s
C:\Users\Matthew\Downloads\ACG_XT1031_4.4.2_KXB20.9-1.10-1.43_CFC_1FF.xml\ACG_XT
1031_4.4.2_KXB20.9-1.10-1.43_CFC_1FF.xml>mfastboot flash fsg fsg.mbn
target max-sparse-size: 256MB
sending 'fsg' (255 KB)...
OKAY [ 0.058s]
writing 'fsg'...
OKAY [ 5.257s]
finished. total time: 5.316s
C:\Users\Matthew\Downloads\ACG_XT1031_4.4.2_KXB20.9-1.10-1.43_CFC_1FF.xml\ACG_XT
1031_4.4.2_KXB20.9-1.10-1.43_CFC_1FF.xml>mfastboot erase cache
erasing 'cache'...
OKAY [ 0.153s]
finished. total time: 0.154s
C:\Users\Matthew\Downloads\ACG_XT1031_4.4.2_KXB20.9-1.10-1.43_CFC_1FF.xml\ACG_XT
1031_4.4.2_KXB20.9-1.10-1.43_CFC_1FF.xml>mfastboot erase userdata
erasing 'userdata'...
OKAY [ 0.487s]
finished. total time: 0.488s
C:\Users\Matthew\Downloads\ACG_XT1031_4.4.2_KXB20.9-1.10-1.43_CFC_1FF.xml\ACG_XT
1031_4.4.2_KXB20.9-1.10-1.43_CFC_1FF.xml>mfastboot reboot
rebooting...
finished. total time: 0.002s
C:\Users\Matthew\Downloads\ACG_XT1031_4.4.2_KXB20.9-1.10-1.43_CFC_1FF.xml\ACG_XT
1031_4.4.2_KXB20.9-1.10-1.43_CFC_1FF.xml>
It crashed
Matthew931 said:
It crashed
Click to expand...
Click to collapse
Why are you using the 4.4.2 ACG firmware image and not the 4.4.4 Republic Wireless image?
http://www.filefactory.com/file/4hz...4.4_KXB21.14-L2.4_5_release-keys-cid6.xml.zip
I was given a xt1080 for repair
24.13.2.obake-maxx
SU6-7.2
Locked bootloader. No root. No adb access.
System boots but there is constants force close of background processes like gapps and acore.
I wanted to factory reset and I did but on reboot it had all the same apps and user data intact, no factory state.
Changing any config or uninstalling any app result in it being back after reboot.
What I've tried so far:
-Factory option in AP Fastboot menu. Reboots to system with all the data intact.
-Recovery option in AP Fastboot menu. Reboots to bootloader and states "Boot up failed".
-fastboot erase userdata
-fastboot -w
both with the resulting output:
erasing 'userdata'...
OKAY [ 0.500s]
erasing 'cache'...
OKAY [ 0.620s]
finished. total time: 1.120s
but sadly all userdata is sitting there intact after reboot.
I downloaded VZW-4.4.4-SU6-7.2-release-keys.xml.zip. Tried with RSDLite but it didn't detect the device.
I have installed the drivers and MotorolaDeviceManager. So I decompressed the firmware and flashed the partitions
using fastboot in a script. Resulting in all partitions being flashed OK but after reboot the device
was the same as before with all the apps and user data present. Spooky isn't it?
Can some one offer me any advice? Is it a hardware faliure?
Output of the script follows:
C:\Users\ernesto\Downloads\xt1080\ADB&FastBoot_v2.56>mfastboot.exe oem fb_mode_set
< waiting for device >
...
OKAY [ 0.109s]
finished. total time: 0.109s
C:\Users\ernesto\Downloads\xt1080\ADB&FastBoot_v2.56>mfastboot.exe flash partition gpt.bin
sending 'partition' (32 KB)...
OKAY [ 0.220s]
writing 'partition'...
This may take a few seconds, if a
different partition table is being
flashed since we need to backup
and restore a few partitions
OKAY [ 0.444s]
finished. total time: 0.665s
C:\Users\ernesto\Downloads\xt1080\ADB&FastBoot_v2.56>mfastboot.exe flash motoboot motoboot.img
sending 'motoboot' (1604 KB)...
OKAY [ 0.360s]
writing 'motoboot'...
flashing tz ...
flashing rpm ...
flashing aboot ...
flashing sbl1 ...
flashing sbl2 ...
flashing sbl3 ...
OKAY [ 4.540s]
finished. total time: 4.900s
C:\Users\ernesto\Downloads\xt1080\ADB&FastBoot_v2.56>mfastboot.exe flash logo logo.bin
sending 'logo' (215 KB)...
OKAY [ 0.290s]
writing 'logo'...
OKAY [ 0.811s]
finished. total time: 1.102s
C:\Users\ernesto\Downloads\xt1080\ADB&FastBoot_v2.56>mfastboot.exe flash boot boot.img
sending 'boot' (10240 KB)...
OKAY [ 0.900s]
writing 'boot'...
OKAY [ 1.872s]
finished. total time: 2.772s
C:\Users\ernesto\Downloads\xt1080\ADB&FastBoot_v2.56>mfastboot.exe flash recovery recovery.img
sending 'recovery' (10240 KB)...
OKAY [ 0.900s]
writing 'recovery'...
OKAY [ 1.512s]
finished. total time: 2.412s
C:\Users\ernesto\Downloads\xt1080\ADB&FastBoot_v2.56>mfastboot.exe flash system system.img
sending 'system' (786432 KB)...
OKAY [ 49.426s]
writing 'system'...
OKAY [ 54.106s]
sending 'system' (531955 KB)...
OKAY [ 33.515s]
writing 'system'...
OKAY [ 36.056s]
finished. total time: 173.103s
C:\Users\ernesto\Downloads\xt1080\ADB&FastBoot_v2.56>mfastboot.exe flash modem NON-HLOS.bin
sending 'modem' (54252 KB)...
OKAY [ 3.671s]
writing 'modem'...
OKAY [ 2.330s]
finished. total time: 6.002s
C:\Users\ernesto\Downloads\xt1080\ADB&FastBoot_v2.56>mfastboot.exe erase modemst1
erasing 'modemst1'...
OKAY [ 0.419s]
finished. total time: 0.419s
C:\Users\ernesto\Downloads\xt1080\ADB&FastBoot_v2.56>mfastboot.exe erase modemst2
erasing 'modemst2'...
OKAY [ 0.419s]
finished. total time: 0.419s
C:\Users\ernesto\Downloads\xt1080\ADB&FastBoot_v2.56>mfastboot.exe flash fsg fsg.mbn
sending 'fsg' (538 KB)...
OKAY [ 0.330s]
writing 'fsg'...
OKAY [ 0.761s]
finished. total time: 1.092s
C:\Users\ernesto\Downloads\xt1080\ADB&FastBoot_v2.56>mfastboot.exe erase cache
erasing 'cache'...
OKAY [ 0.649s]
finished. total time: 0.649s
C:\Users\ernesto\Downloads\xt1080\ADB&FastBoot_v2.56>mfastboot.exe erase userdata
erasing 'userdata'...
OKAY [ 0.540s]
finished. total time: 0.540s
C:\Users\ernesto\Downloads\xt1080\ADB&FastBoot_v2.56>mfastboot.exe erase customize
erasing 'customize'...
OKAY [ 0.150s]
finished. total time: 0.150s
C:\Users\ernesto\Downloads\xt1080\ADB&FastBoot_v2.56>mfastboot.exe erase clogo
erasing 'clogo'...
OKAY [ 0.518s]
finished. total time: 0.518s
C:\Users\ernesto\Downloads\xt1080\ADB&FastBoot_v2.56>mfastboot.exe oem config carrier gsm
...
Failed to flash config value
OKAY [ 0.149s]
finished. total time: 0.150s
C:\Users\ernesto\Downloads\xt1080\ADB&FastBoot_v2.56>mfastboot.exe oem fb_mode_clear
...
OKAY [ 0.148s]
finished. total time: 0.148s
C:\Users\ernesto\Downloads\xt1080\ADB&FastBoot_v2.56>mfastboot.exe reboot
rebooting...
finished. total time: 0.002s
I selected BP Tools in bootloader menu. Now I have adb access. Tried to delete some files, this is what I get:
[email protected]:/sdcard/dcim/Camera $ rm *
rm *
rm failed for IMG_20160222_223144143.jpg, Read-only file system
255|[email protected]:/sdcard/dcim/Camera $
In BP Tools mode various devices get detected. One of them is Motorola QC Diag Port, I installed the drivers.
Now it shows in QPST software. QPST has a Software Download utility that is suposed to flash bootloaders,
partitions images and whole firmware images. Does any one has any experience flashing with QPST?
Do you already resolve this issue? I got the same problem.