Related
Hey All,
I just got my One XL and I was so excited by the root on 2.20 that I decided to try and flash the custom rom of AOKP on onto it.
After rooting the phone, I did the following:
Flashed TWRP 2.3.1.0 - success
Then I went and saw the thread about the AOKP rom and followed instructions. On that thread, it states that you must flash the boot.img before doing this through fastboot if you are coming forom 2.20 firmware, so I did that. Then I saw that it said on the thread "do not complain about bootlooping if you flashed a custom KERNEL or did not manually flash the stock KERNEL via fastboot" As this was the first custom rom I had attemped with this phone I assumed that I had the stock KERNEL already installed, so I did not flash any kind of kernel.
As soon as I flashed the boot.img from AOKP, I saw that there was red writing on the bootloader about this being for development use only and I noticed that the phone would get past the bootloader to a black screen and then would reboot (boot loop).
I thought that the issue here was that I did not flash the kernel so I went and downloaded the rohan.kernel and flashed that. HOWEVER, I did not realize that I was meant to use recovery to do that and I pushed the boot.img from within the kernel via fastboot instead of using recovery to flash the new kernel (not sure if that matters all that much, but I think that from now on all rom work will be done in the day time after sleeping a little more).
After doing that I see no change in the performance of the phone (it is still boot looping). I am unsure of what to do now. I managed to push the KERNEL zip file and the ROM zip file to the phone via adb but when I try and install them via TWRP I am getting an error because the phone reports that it is unable to mount /sdcard/.
Can one of the far more knowlegable gurus here point me in the right direction? I have wiped the cache and davlik cache numerous times but that has not helped. Should I use TWRP to wipe the system? How can I get the phone back to a place where I can install the new rom?
Thanks!!
ackerchez said:
Hey All,
I just got my One XL and I was so excited by the root on 2.20 that I decided to try and flash the custom rom of AOKP on onto it.
After rooting the phone, I did the following:
Flashed TWRP 2.3.1.0 - success
Then I went and saw the thread about the AOKP rom and followed instructions. On that thread, it states that you must flash the boot.img before doing this through fastboot if you are coming forom 2.20 firmware, so I did that. Then I saw that it said on the thread "do not complain about bootlooping if you flashed a custom KERNEL or did not manually flash the stock KERNEL via fastboot" As this was the first custom rom I had attemped with this phone I assumed that I had the stock KERNEL already installed, so I did not flash any kind of kernel.
As soon as I flashed the boot.img from AOKP, I saw that there was red writing on the bootloader about this being for development use only and I noticed that the phone would get past the bootloader to a black screen and then would reboot (boot loop).
I thought that the issue here was that I did not flash the kernel so I went and downloaded the rohan.kernel and flashed that. HOWEVER, I did not realize that I was meant to use recovery to do that and I pushed the boot.img from within the kernel via fastboot instead of using recovery to flash the new kernel (not sure if that matters all that much, but I think that from now on all rom work will be done in the day time after sleeping a little more).
After doing that I see no change in the performance of the phone (it is still boot looping). I am unsure of what to do now. I managed to push the KERNEL zip file and the ROM zip file to the phone via adb but when I try and install them via TWRP I am getting an error because the phone reports that it is unable to mount /sdcard/.
Can one of the far more knowlegable gurus here point me in the right direction? I have wiped the cache and davlik cache numerous times but that has not helped. Should I use TWRP to wipe the system? How can I get the phone back to a place where I can install the new rom?
Thanks!!
Click to expand...
Click to collapse
First of all I think if you're on 2.2 fw I don't think you can flash kernels through TWRP - I think it has to be through fastboot, I don't know first hand as I'm still on an earlier fw version.
Secondly if you can get into recovery you can flash another rom.
Go to Mount > Mount USB Storage with your phone connected via USB, it should mount as a drive otherwise windows asks you to format format the drive if this happens chances are may have wiped it in bootloader with factory reset or clear storage in either case just format the drive.
You can then drag and drop another rom onto the phone and flash that - remember to extract the boot.img from the rom and flash via fastboot so it will boot.
Goodluck
thejosh86 said:
First of all I think if you're on 2.2 fw I don't think you can flash kernels through TWRP - I think it has to be through fastboot, I don't know first hand as I'm still on an earlier fw version.
Secondly if you can get into recovery you can flash another rom.
Go to Mount > Mount USB Storage with your phone connected via USB, it should mount as a drive otherwise windows asks you to format format the drive if this happens chances are may have wiped it in bootloader with factory reset or clear storage in either case just format the drive.
You can then drag and drop another rom onto the phone and flash that - remember to extract the boot.img from the rom and flash via fastboot so it will boot.
Goodluck
Click to expand...
Click to collapse
Hey!
Thanks a ton for your reply! I managed to get the phone to install a new ROM (AOKP V5) and it seems to boot up. Now when I get into that rom, I see all kinds of things crashing on me. The "Settings" app crashes, the keyboard crashes..any idea?
Did you wipe system, factory reset, davlik and cache from within TWRP before flashing?
Try that otherwise if you're still running into issues post in the thread.
You flashed the 11/10 JB gapps?
Sent from my Nexus 7 using xda premium
ok, i got the phone back up now and have been able to flash stuff properly.
I am working on an issue where after flashing a new rom (AOKP v4) and then a new kernel right after (rohan.kernel V2) the rom seems to hang on the loading splash screen. Has anyone else had this happen? Know how to solve it?
ackerchez said:
ok, i got the phone back up now and have been able to flash stuff properly.
I am working on an issue where after flashing a new rom (AOKP v4) and then a new kernel right after (rohan.kernel V2) the rom seems to hang on the loading splash screen. Has anyone else had this happen? Know how to solve it?
Click to expand...
Click to collapse
Did u wipe everything? (davlik, cache)
Sent from my HTC One XL using xda premium
First off, let me start out by saying that the Infinity is running on what is possibly the worst software ever designed. Props, Asus. You've made my life hell until the last second.
So, here's my problem. The tablet was working fine 24 hours ago. I turned it off last night, turned it on this morning, working great on CROMi-Xeno (which is awesome, it actually makes the tablet bearable.) and played on it for a while before turning off again. While playing it, I noticed it lag a little more than usual, so I decided to cold boot it. Booted bootloader, hit cold boot, and.... bootlooping. Awesome. No biggie, I'll just restore a backup. I waited for it to restore, and when it was finished, wiped cache and Dalvik, and.... bootlooping again. I tried wiping system and data. Still bootlooping. I downloaded Asus 's official firmware from their website, and flashed. Bootlooping. Someone help me fix this and get it back to stock firmware, so I can sell it and be done with it once and for all. I will never buy another Asus product again.
greydelta38 said:
First off, let me start out by saying that the Infinity is running on what is possibly the worst software ever designed. Props, Asus. You've made my life hell until the last second.
So, here's my problem. The tablet was working fine 24 hours ago. I turned it off last night, turned it on this morning, working great on CROMi-Xeno (which is awesome, it actually makes the tablet bearable.) and played on it for a while before turning off again. While playing it, I noticed it lag a little more than usual, so I decided to cold boot it. Booted bootloader, hit cold boot, and.... bootlooping. Awesome. No biggie, I'll just restore a backup. I waited for it to restore, and when it was finished, wiped cache and Dalvik, and.... bootlooping again. I tried wiping system and data. Still bootlooping. I downloaded Asus 's official firmware from their website, and flashed. Bootlooping. Someone help me fix this and get it back to stock firmware, so I can sell it and be done with it once and for all. I will never buy another Asus product again.
Click to expand...
Click to collapse
I'm wondering if my version of TWRP is too old or something. Can anyone explain in detail how to update to a newer version of TWRP or install CWM in order for flashing to fully work?
greydelta38 said:
I'm wondering if my version of TWRP is too old or something. Can anyone explain in detail how to update to a newer version of TWRP or install CWM in order for flashing to fully work?
Click to expand...
Click to collapse
what version do you currently have, just download the .blob from twrp's site boot into fastboot and run "fastboot flash recovery *name of blob*.blob"
JoinTheRealms said:
what version do you currently have, just download the .blob from twrp's site boot into fastboot and run "fastboot flash recovery *name of blob*.blob"
Click to expand...
Click to collapse
Yeah - I'm also wondering what bootloader you are running with it.
If you are not current on either flash the bootloader/TWRP package from CROMi-X OP, boot back into system, let it bootloop if it does, boot back into TWRP and reflash the rom.
That seems like it would be the only explanation, but now it won't even boot into recovery. I can get it into fastboot, but as soon as I select recovery image it shows the firmware upgrade symbol and then immediately shows the Android Error symbol, and sticks there until I hard power down. When I'm in fastboot, here's what I'm gonna do:
1. connect fastbooted Infinity to pc with all necessary drivers installed
2. download filename.blob from TWRP's website for the Infinity
3. on command console enter -fastboot flash recovery filename.blob- and it will push the recovery through fastboot hopefully
Is that correct? I'm under the impression that as long as I can get to the fastboot menu, ANYTHING is repairable.
greydelta38 said:
That seems like it would be the only explanation, but now it won't even boot into recovery. I can get it into fastboot, but as soon as I select recovery image it shows the firmware upgrade symbol and then immediately shows the Android Error symbol, and sticks there until I hard power down. When I'm in fastboot, here's what I'm gonna do:
1. connect fastbooted Infinity to pc with all necessary drivers installed
2. download filename.blob from TWRP's website for the Infinity
3. on command console enter -fastboot flash recovery filename.blob- and it will push the recovery through fastboot hopefully
Is that correct? I'm under the impression that as long as I can get to the fastboot menu, ANYTHING is repairable.
Click to expand...
Click to collapse
The command is
fastboot -i 0x0B05 flash recovery filename.blob
Since you can boot into the bootloader, check the version# and make sure you flash a compatible recovery.
Most of the time, as long as you can get into the BL, it's fixable. But to make it unbrickable you need nvFlash. And that's just become possible for or tablet on JB. May be a project for once you got this problem fixed: http://forum.xda-developers.com/showthread.php?t=2455925
I suspect you need to format data to fix the issues (you'll lose everything on the internal sd card) but before you do follow bernd's recommendation and get TWRP on there (you wiped it out when you flashed ASUS stock) and then use the file explorer in TWRP to copy anything important to an external SD and make sure the cromi-x rom is on sd too. Then format data from the wipe menu and reinstall. You'll be back to normal in no time. :good:
BTW You may have got some corruption from turning f-sync off.
berndblb said:
The command is
fastboot -i 0x0B05 flash recovery filename.blob
Since you can boot into the bootloader, check the version# and make sure you flash a compatible recovery.
Most of the time, as long as you can get into the BL, it's fixable. But to make it unbrickable you need nvFlash. And that's just become possible for or tablet on JB. May be a project for once you got this problem fixed: http://forum.xda-developers.com/showthread.php?t=2455925
Click to expand...
Click to collapse
sbdags said:
I suspect you need to format data to fix the issues (you'll lose everything on the internal sd card) but before you do follow bernd's recommendation and get TWRP on there (you wiped it out when you flashed ASUS stock) and then use the file explorer in TWRP to copy anything important to an external SD and make sure the cromi-x rom is on sd too. Then format data from the wipe menu and reinstall. You'll be back to normal in no time. :good:
BTW You may have got some corruption from turning f-sync off.
Click to expand...
Click to collapse
I tried wiping internal before recovery was lost and it didn't work. I suspected that some problems arose from turning fsync off too. I'm pushing TWRP 2.6 to the Infinity now, will try flashing your excellent rom again and see if it takes without bootlooping.
greydelta38 said:
I tried wiping internal before recovery was lost and it didn't work. I suspected that some problems arose from turning fsync off too. I'm pushing TWRP 2.6 to the Infinity now, will try flashing your excellent rom again and see if it takes without bootlooping.
Click to expand...
Click to collapse
You need to specifically format data in twrp not just wipe data. Only formatting will restore the device now once data corruption has occurred.
Hey guys, flashed this camera mod http://forum.xda-developers.com/showthread.php?t=2516061
and am now stuck in a boot loop. my huge mistake was i didn't make a backup on CWN when i installed it, since i'm a massive noob.
I'd post this in the thread for the mod, but new accts can't post in developer forum (to prevent threads like these, probably).
anyone know a quick solution to this? i've dalvik wiped, factory resetted, wiped cache partition.
edit: i also don't know how to get the stock camera ROM back on the device since it doesn't show up in my windows explorer. if i knew that, it'd be easy to go back to stock.
stealth0wnz said:
Hey guys, flashed this camera mod http://forum.xda-developers.com/showthread.php?t=2516061
and am now stuck in a boot loop. my huge mistake was i didn't make a backup on CWN when i installed it, since i'm a massive noob.
I'd post this in the thread for the mod, but new accts can't post in developer forum (to prevent threads like these, probably).
anyone know a quick solution to this? i've dalvik wiped, factory resetted, wiped cache partition.
edit: i also don't know how to get the stock camera ROM back on the device since it doesn't show up in my windows explorer. if i knew that, it'd be easy to go back to stock.
Click to expand...
Click to collapse
If you can get back to the boot loader (hold down power button and volume down) and recovery (choice in bootloader menu), you are fine. I did the same thing. you can adb push the stock file (in his developer thread) and then flash it with custom recovery.
Here is a link showing how to adb push - http://forum.xda-developers.com/showthread.php?t=1667929
If that doesn't work, you can always flash back stock...... Unfortunately have had to do this more than once and have learned my lesson on backups.
Speedbal
Hope that helps.
speedbal said:
If you can get back to the boot loader (hold down power button and volume down) and recovery (choice in bootloader menu), you are fine. I did the same thing. you can adb push the stock file (in his developer thread) and then flash it with custom recovery.
If that doesn't work, you can always flash back stock...... Unfortunately have had to do this more than once and have learned my lesson on backups.
Speedbal
Hope that helps.
Click to expand...
Click to collapse
I guess you gotta learn this stuff at some point, thanks for your help! i forgot that you could push files!
now a brand new issue is that anytime i flash ANYTHING to the phone, adb doesn't see the device anymore.
anyone know what's up with that?
URGENT
I did the camera mod too and happened to kill my phone trying to get a camera back on it. It boot loops bc now there is no os. Tried installing Cm-12.1 on my N910P and its now getting a "Error updating binary zip" on TWRP. I have no idea what to do. I have wiped the phone several times. Tried using odin and it failed when the phone was up and running, now it still fails any rom. Please help. I have pushed thru adb, odin, im out of options on my end. no backup either. Looking for a stock twrp recovery file for any note4 dont care anymore
SteveRogers1776 said:
I did the camera mod too and happened to kill my phone trying to get a camera back on it. It boot loops bc now there is no os. Tried installing Cm-12.1 on my N910P and its now getting a "Error updating binary zip" on TWRP. I have no idea what to do. I have wiped the phone several times. Tried using odin and it failed when the phone was up and running, now it still fails any rom. Please help. I have pushed thru adb, odin, im out of options on my end. no backup either. Looking for a stock twrp recovery file for any note4 dont care anymore
Click to expand...
Click to collapse
New nightlies of CM12.1 needs the bootloader to be updated to newer version (HHZ12H).
Following the link to flashable zip of new bootloader: https://www.androidfilehost.com/?fid=23991606952613145 (Credit to @mo976)
Flash it in recovery
Wipe the cache
Reboot into bootloader and select recovery.
Flash CM12.1 rom.
I just tried what you recommended . Maybe I'm doing it wrong but I'm still getting "error updating binary zip" when trying to load anything on twrp
Hi all,
So I'm far from a noob at at all of this (doing the custom android thing for years). But I'm not exactly constantly fiddling with my phone all the time anymore either. Basically I get a set-up that works for me, and I stick with it.
I've patiently been waiting to update to Lollipop. And today I did it. I did it by flashing the required factory images with fastboot.
AND IT WORKS. No problem. It boots. I go through the initial set-up. I can let it restore all my apps and passwords from the google servers, etc. So far so good.
My problem is that I cannot root. After I try, it bootloops (stuck at the Google splash, with my unlocked icon).
I tried to root before my first boot. I tried after the initial boot (before set-up and signing in). I tried rooting after setting it all up, and singing in, and letting google restore all of my apps. No matter which sequence I try, it will reboot a couple times at the first Google splash, and then fall back to Recovery.
(So, I'm on back on my rooted 4.4.4 nandroid, I think it's Mahdi Rom-- I forget)
Vital Stats:
Trying to install factory images of 5.0.1, all stock (system, boot (kernel), radio, bootloader)
Factory reset
(the above works fine)
TWRP 2.8.1.0
SuperSU-v2.40 (flashed via recovery)
Any ideas? Thanks for any help.
No, but could you try the previous version of SuperSU? Just to rule out the new version that I haven't tested please?
I updated to 5.0.1 earlier
Flashed all the img files exact userdata and then booted in to Android.
I then flashed TWRP 2.8.1.0 and used that to flash SuperSU 2.37
All that worked fine.. I then did a play update and SuperSU updated to 2.40
All working fine as far as I can tell. Apps needing root are working!
iowabeakster said:
Hi all,
So I'm far from a noob at at all of this (doing the custom android thing for years). But I'm not exactly constantly fiddling with my phone all the time anymore either. Basically I get a set-up that works for me, and I stick with it.
I've patiently been waiting to update to Lollipop. And today I did it. I did it by flashing the required factory images with fastboot.
AND IT WORKS. No problem. It boots. I go through the initial set-up. I can let it restore all my apps and passwords from the google servers, etc. So far so good.
My problem is that I cannot root. After I try, it bootloops (stuck at the Google splash, with my unlocked icon).
I tried to root before my first boot. I tried after the initial boot (before set-up and signing in). I tried rooting after setting it all up, and singing in, and letting google restore all of my apps. No matter which sequence I try, it will reboot a couple times at the first Google splash, and then fall back to Recovery.
(So, I'm on back on my rooted 4.4.4 nandroid, I think it's Mahdi Rom-- I forget)
Vital Stats:
Trying to install factory images of 5.0.1, all stock (system, boot (kernel), radio, bootloader)
Factory reset
(the above works fine)
TWRP 2.8.1.0
SuperSU-v2.40 (flashed via recovery)
Any ideas? Thanks for any help.
Click to expand...
Click to collapse
Try not doing that? When you go through the initial configuration, choose "Set up as a new device". Maybe the restore is somehow corrupting SuperSU?
BirchBarlow said:
Try not doing that? When you go through the initial configuration, choose "Set up as a new device". Maybe the restore is somehow corrupting SuperSU?
Click to expand...
Click to collapse
It happens even if I try to root before setting anything up at all.
albert_htc,
Are you saying: I should also flash the stock recovery first. Then boot for the first time. Then re-flash TWRP. Then flash SuperSU.
I never flashed the stock recovery. TWRP was on already on it.
Thanks guys. I'll give it another rip (doing stock recovery, then flashing back to TWRP) sometime soon.
iowabeakster said:
It happens even if I try to root before setting anything up at all.
albert_htc,
Are you saying: I should also flash the stock recovery first. Then boot for the first time. Then re-flash TWRP. Then flash SuperSU.
I never flashed the stock recovery. TWRP was on already on it.
Thanks guys. I'll give it another rip (doing stock recovery, then flashing back to TWRP) sometime soon.
Click to expand...
Click to collapse
Yes, flash the factory image using the batch file so every partition gets re-flashed. Now I'm thinking maybe your recovery is corrupt.
Run flash-all.bat and when your device reboots, go through all of the initial configuration and download all of the Gapps updates. Once that's all completed, go ahead and route using TWRP. If you find yourself still having the same problem, try live booting TWRP to flash SuperSU.
BirchBarlow said:
Yes, flash the factory image using the batch file so every partition gets re-flashed. Now I'm thinking maybe your recovery is corrupt.
Run flash-all.bat and when your device reboots, go through all of the initial configuration and download all of the Gapps updates. Once that's all completed, go ahead and route using TWRP. If you find yourself still having the same problem, try live booting TWRP to flash SuperSU.
Click to expand...
Click to collapse
I'm not going to flash over my user data, nandroids, app back-ups, etc. I'll stay with kit kat forever on my nexus 5 before I do that. Version numbers aren't that important. Hours wasted getting things set-up again are.
My recovery works fine. Both on kit kat and lollipop. My only problem is a boot loop when I flash SuperSU (via TWRP), on lollipop. I will try flashing stock recovery, though and then reflashing TWRP.
iowabeakster said:
I'm not going to flash over my user data, nandroids, app back-ups, etc. I'll stay with kit kat forever on my nexus 5 before I do that. Version numbers aren't that important. Hours wasted getting things set-up again are.
My recovery works fine. Both on kit kat and lollipop. My only problem is a boot loop when I flash SuperSU (via TWRP), on lollipop. I will try flashing stock recovery, though and then reflashing TWRP.
Click to expand...
Click to collapse
It's a tedious process, but it really isn't all that hard to back everything up to a computer, and you can do it easily with fastboot and a single command line.
Or what I'd recommend doing is just booting up, backing up all folders to a PC and then resetting and restoring later, backup apps with Titanium Backup (what I always do). A lot of us flashed factory images when Lollipop came out, so it isn't that bad once you start on the road.
Have you tried rooting from the bootloader via Chainfire's cf-auto root? I know I've read that sometimes rooting from recovery doesn't work properly, and that only certain zips will work. I've used the auto root each time (from stock fastboot flashing 5.0 & 5.0.1) with lollipop and it works fine. Link
Unzip and run batch file in bootloader. It will wipe everything if you haven't already unlocked bootloader (fastboot oem unlock). If you are already unlocked it won't wipe anything.
snappycg1996 said:
It's a tedious process, but it really isn't all that hard to back everything up to a computer, and you can do it easily with fastboot and a single command line.
Or what I'd recommend doing is just booting up, backing up all folders to a PC and then resetting and restoring later, backup apps with Titanium Backup (what I always do). A lot of us flashed factory images when Lollipop came out, so it isn't that bad once you start on the road.
Click to expand...
Click to collapse
I just backed the /sdcard, to my PC. I just re-ran titanium.
I can deal with "/sdcard issues" from updating to lollipop easy enough. That's a 30 second fix. I can deal with setting up my email accounts to my email client app. I can deal with launcher settings, and all the other apps, widgets, etc. Those are things that I can slowly get back to where I want. They aren't critical. But yeah, very tedious.
I think "starting over" may be much more tedious for me than most people though. I run ssh servers and clients on all PCs, servers, and phones (disabling passwords and using rsa encryption keys for security). It's very nice, once I get it all set up in that I can access everything (from anything) very easily. I do need root for that though also.
But if I can't just hit a "restore" to get it all my ssh addresses, keys, fingerprits, etc back to where it was and then I have to: reverify new fingerprints, generate new keys, re-enable passwords to transmit new keys for everything, then disable passwords (for all machines) ... well... I just get very very grumpy.
anactoraaron said:
Have you tried rooting from the bootloader via Chainfire's cf-auto root? I know I've read that sometimes rooting from recovery doesn't work properly, and that only certain zips will work. I've used the auto root each time (from stock fastboot flashing 5.0 & 5.0.1) with lollipop and it works fine. Link
Unzip and run batch file in bootloader. It will wipe everything if you haven't already unlocked bootloader (fastboot oem unlock). If you are already unlocked it won't wipe anything.
Click to expand...
Click to collapse
I'll check that out. Thanks.
When I attempt to go to Cofface's Baidu page to download his 5.1 TWRP version, I get a message saying the content is no longer available. Specifically, Google Translate shows "Lol, you visit the page does not exist." Does anyone happen to have a copy they're willing to share? Or is there some issue with the 5.1 version that would suggest that I shouldn't use it? If I shouldn't ask for some reason, I apologize. Otherwise, thanks in advance.
https://yadi.sk/d/5YI63uiAhz5UD/Recovery/TWRP
Thanks very much for the link! I think I must have some deeper problems, as every time I flash this recovery (and another version I found in my old downloads), I just get stuck in a boot loop. I was able to use TWRP when I was on B015, but for some reason, I can't get it to work on B106. I'm using:
fastboot flash recovery c:\android\twrp_cn.img
However, like I said I just get stuck in a boot loop. When I flash the stock recovery, everything starts working again.
wpennhokie said:
Thanks very much for the link! I think I must have some deeper problems, as every time I flash this recovery (and another version I found in my old downloads), I just get stuck in a boot loop. I was able to use TWRP when I was on B015, but for some reason, I can't get it to work on B106. I'm using:
fastboot flash recovery c:\android\twrp_cn.img
However, like I said I just get stuck in a boot loop. When I flash the stock recovery, everything starts working again.
Click to expand...
Click to collapse
Did you unlock your bootloader?
Yes, it is. I was able to run TWRP when I was on B015. The phone is rooted, so I've just been using Titanium Backup to back everything up before I wipe the phone, but it would be nice to take a Nandroid backup instead of having to reinstall from TB.
wpennhokie said:
Yes, it is. I was able to run TWRP when I was on B015. The phone is rooted, so I've just been using Titanium Backup to back everything up before I wipe the phone, but it would be nice to take a Nandroid backup instead of having to reinstall from TB.
Click to expand...
Click to collapse
Thats the same problem I have. I used the other twrp recovery https://mega.nz/#!l5kmUByA!41uExNuasZRgLBML9TTSp8myX-_F6UgQZuE2F2BRZUE
This one worked with out boot loops for me. you can give it a shot.
Thanks for the link! I can now get into TWRP. However (sadly), after I leave TWRP, it reboots directly back to TWRP. I've tried rebooting from TWRP into the system and shutting down, but each time, it just goes straight back to TWRP. I was able to boot into fastboot, so I reflashed the boot.img file, but it still goes straight to TWRP. I actually have had this issue before, and I wasn't ever able to figure it out. Any help would be greatly appreciated, as usual.
wpennhokie said:
Thanks for the link! I can now get into TWRP. However (sadly), after I leave TWRP, it reboots directly back to TWRP. I've tried rebooting from TWRP into the system and shutting down, but each time, it just goes straight back to TWRP. I was able to boot into fastboot, so I reflashed the boot.img file, but it still goes straight to TWRP. I actually have had this issue before, and I wasn't ever able to figure it out. Any help would be greatly appreciated, as usual.
Click to expand...
Click to collapse
I had that exact same problem twice on Kangvip B015. When I would restart it would all of a sudden automatically boot into TWRP every time and never boot into the OS. When that happens, in TWRP make a backup, then Fastboot flash the stock ROM (system, boot, cust, recovery, user data etc) then when it boots do a factory data reset, then reroot, flash TWRP and restore from the backup you made. The OS will boot from your backup. I dunno why this happens, maybe it has something to do with with Kernel.
I've tried it a couple of times now, and I'm still not getting it to boot past TWRP once I flash the recovery. It was able to take a backup with TWRP, but when I restored it, I still had to restore the stock recovery before I could boot into the system. At worst, at this point, I can always flash TWRP, take a backup, flash the stock recovery, and then have my system back. It's a few extra steps, but I think I'll do this until I find a custom ROM that I like. I greatly appreciate the help so far.
wpennhokie said:
Thanks for the link! I can now get into TWRP. However (sadly), after I leave TWRP, it reboots directly back to TWRP. I've tried rebooting from TWRP into the system and shutting down, but each time, it just goes straight back to TWRP. I was able to boot into fastboot, so I reflashed the boot.img file, but it still goes straight to TWRP. I actually have had this issue before, and I wasn't ever able to figure it out. Any help would be greatly appreciated, as usual.
Click to expand...
Click to collapse
Reflash the stock b106 recovery and wipe user data and cache, Then reflash twrp recovery and restore your backup. It should boot then.
To follow up, I tried using the updated version of TWRP that you (mtyler7807) posted in the development thread and following the instructions above. I can flash the recovery, boot into it, and take a backup. After that, as long as I boot into the system, I'm fine. However, once I boot into recovery for the first time after that initial backup, it just reboots into TWRP every time. So, right now, I took a backup a day or so ago, and I've just avoided going back in to TWRP again. I have another X2 on the way (a 32GB version), so I'm hoping that I'll have better luck with that one.
wpennhokie said:
To follow up, I tried using the updated version of TWRP that you (mtyler7807) posted in the development thread and following the instructions above. I can flash the recovery, boot into it, and take a backup. After that, as long as I boot into the system, I'm fine. However, once I boot into recovery for the first time after that initial backup, it just reboots into TWRP every time. So, right now, I took a backup a day or so ago, and I've just avoided going back in to TWRP again. I have another X2 on the way (a 32GB version), so I'm hoping that I'll have better luck with that one.
Click to expand...
Click to collapse
By any chance, did you delete anything from the Cust Folder at any point?
ajsmsg78 said:
By any chance, did you delete anything from the Cust Folder at any point?
Click to expand...
Click to collapse
As far as I know, I have not. I did do a complete wipe of everything (except the SD card) at one point using TWRP, but I've always restored the system using the stock system.img file. Right now, the Cust folder is showing five folders, with several more folders/files underneath. Is there a particular file I should be checking for?
wpennhokie said:
As far as I know, I have not. I did do a complete wipe of everything (except the SD card) at one point using TWRP, but I've always restored the system using the stock system.img file. Right now, the Cust folder is showing five folders, with several more folders/files underneath. Is there a particular file I should be checking for?
Click to expand...
Click to collapse
I don't think so. It's weird how some of us have different problems than others. I've had zero issues with TWRP but lately my screen has been going crazy. My touches don't work, things jump it's like my digitizer is messed up but when I restart everything is fine again. So I reloaded everything and the problem went away. I guess I debloated too much last time.