hi guy
i have one magic 32a and i dont know what happend go to this problem
when i turn on this screen is like attachment
and i cant go to hboot & recovery mod
what can i do?! any one help me?
reza_majd said:
hi guy
i have one magic 32a and i dont know what happend go to this problem
when i turn on this screen is like attachment
and i cant go to hboot & recovery mod
what can i do?! any one help me?
Click to expand...
Click to collapse
any one help me?!! plz
had the same error !
I send it to repair service. ! they changed the mainboard of the phone.
So ! There is no other chance !
It was a warranty.
Can you run into fastboot (back+power)?
cnossa said:
Can you run into fastboot (back+power)?
Click to expand...
Click to collapse
no i cant run any thing
fast boot,recovery,and... every u think
did u use ruu before this problem came?
Same to me...
have the same problem in my phone. I could not find the solution. I'm waiting for your help
adb
Can you access your phone through adb?
Can you access your phone through adb?
darsic said:
Can you access your phone through adb?
Click to expand...
Click to collapse
no cant access with anything
I got the same problem. It happened when I flashed corrupted radio image. Now when I turn it on the package and arrow picture appears and after few second lots of different colors appear. Can't access it in any way. I understand there is radio boot mode when you press trackball and power at the same time. The blue LED shines. I can't do anything in that mod too. Is there anyone who could help us? If not, does anyone know how much is the motherboard replacement? I don't have any type of warranty.
I have same problem with my phone, after radio update
...
Look at these two forums .. try EVERYTHING!!
http://forum.xda-developers.com/showthread.php?t=571457
&&&&
http://forum.xda-developers.com/showthread.php?t=647213
GOOD LUCK!
same pictrue on my magic
after update radio...it's not boot and not do it everything
I tried to install ROM on my sensation and it gets stuck while the installation , now it bricked and wont start at all and when i connect the usb cable gives Quallcomm driver .
Please help me guys ....
Can you enter hboot or recovery?
Hi, i wrong to change code at 210 offset.
now my phone doesn't boot, but pc see QHSUSB_DLOAD ....
How i can repair my One S ??
Please help me !!
_Freezer_ said:
Hi, i wrong to change code at 210 offset.
now my phone doesn't boot, but pc see QHSUSB_DLOAD ....
How i can repair my One S ??
Please help me !!
Click to expand...
Click to collapse
Please help meeeee
Can you explain further?
what did you change, and what did you input?
_Freezer_ said:
Hi, i wrong to change code at 210 offset.
now my phone doesn't boot, but pc see QHSUSB_DLOAD ....
How i can repair my One S ??
Please help me !!
Click to expand...
Click to collapse
You have an unrecoverable brick. Nothing you can do now but call your carrier or htc and try to a warranty repair. Qhsusd_dload means Qualcomm high speed usb download mode and is used by oem to flash software, you would need tools from them or a hack/workaround (which doesn't exist for this phone) to flash while suck in this download mode
So my phone got bricked ! It had the fastboot error , after i did the recovery crap on cmd it only showed lg startup logo , but i was able to go to emergency mode ! Now my phone wont turn on at all . I followed these instructions : http://forum.xda-developers.com/showthread.php?t=875881
Please explain me , is there a way to fix this ?! Will i be able to exchange for a new phone if i still have the guarantee for my phone ? What should i do i am pretty desperate i don't want my mom to kill me lol .
PacManOG said:
So my phone got bricked ! It had the fastboot error , after i did the recovery crap on cmd it only showed lg startup logo , but i was able to go to emergency mode ! Now my phone wont turn on at all . I followed these instructions : http://forum.xda-developers.com/showthread.php?t=875881
Please explain me , is there a way to fix this ?! Will i be able to exchange for a new phone if i still have the guarantee for my phone ? What should i do i am pretty desperate i don't want my mom to kill me lol .
Click to expand...
Click to collapse
P.S
I mean doesnt turn ON !
When you KDZ... ALWAYS " DISABLE " LG USB MODEM in Device Manager.
See if your phone enters emergency mode. Search this forum.
If its under warranty.. they might replace it for free but dont tell them you rooted your phone or anything!!
rr0yy said:
When you KDZ... ALWAYS " DISABLE " LG USB MODEM in Device Manager.
See if your phone enters emergency mode. Search this forum.
If its under warranty.. they might replace it for free but dont tell them you rooted your phone or anything!!
Click to expand...
Click to collapse
I did disable LG USB Modem . I know what is emergency mode i mean i cant do ANYTHING , its like put it to a pc or a charger take battery out try the same put the batery in the same , nothing . It simply doesnt want to turn on
Edit :
Ok so i found out .
Bricked means dead = i have to get a new phone , had the phone for only 2-3 months , so i have the guarantee , hope they will exchange it for a new one or let them fix it by replacing the circuit board or something
Here
If its not entering Emergency.. there is no other way to recover. Go to Service Centre!!
Hi there , I was trying to use JuonuputBear to S-OFF my phone through the wire trick , so I was doing the wire trick (after several failing tries) , and somehow the phone was a total brick , doesn't take usb or charge led ... So I looked into this and I found a QHSUSB_DLOAD fix for that , however my phone doesn't even enter or appear as it is in that mode , I tried doing the wire trick while the phone is dead it didn't work , I tried my linux machine the QHSUSB_DLOAD the phone wasn't found ! I guess the bootloader was wiped when Jounuput bear was doing its stuff , plz help me guys !
EDIT : I don't think anymore the bootloader is wiped since I didn't reach the part where it installs JuonuptBear's bootloader ! PLease any ideas !
you should have posted this in the Q&A section. You arent going to get much help here, just people ranting on the fact that you posted a question in the development issue. Mods should probably move this to that section. As for your problem, i can't really help. sorry
thx , I will tell a mod to move my thread :'(
Have you tried using the Sensation unbrick thread?
try unbricking project or ask in juopunutbear's thread
It tells me to use QHSUSB , which isn't working for me , may you plz link me to it so I could ensure ?
seaskyways said:
It tells me to use QHSUSB , which isn't working for me , may you plz link me to it so I could ensure ?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1522351
rzr86 said:
http://forum.xda-developers.com/showthread.php?t=1522351
Click to expand...
Click to collapse
My phone is not being detected , I removed everything , I try to detect , nop ...
seaskyways said:
My phone is not being detected , I removed everything , I try to detect , nop ...
Click to expand...
Click to collapse
while doing the juopunutbear method did you have enough battery?
if not remove battery,sdcard and sim and charge it as it is for 5-6 hours
then put them back and switch on the device normally
I had 99% charge !
seaskyways said:
I had 99% charge !
Click to expand...
Click to collapse
did you check the troubleshoot from the guide you used?
edit:it is better to post your issue also in the thread you used
Troubleshooting in the jounuputbear thread is for live phones , not for dead phones ...
Any help guys ?!?!
seaskyways said:
Any help guys ?!?!
Click to expand...
Click to collapse
the only thing i can tell you is use jtag.
i am out of ideas
Thats what I finally thought about , but I know nothing at all about JTAG , I need professionel help
EDIT : Maybe AdamOutler :?
seaskyways said:
Thats what I finally thought about , but I know nothing at all about JTAG , I need professionel help
EDIT : Maybe AdamOutler :?
Click to expand...
Click to collapse
i never used jtag.i have no experience on it
you can go in a local repair shop.probably they can fix it
I got it to boot !!! I re-ran the joupunut thing , and tried doing the wire-trick before the phone even shows any sign , instantly the PC showed that qhsusb mode , and everything went alrighty !! Maybe this can be an answer for others !
seaskyways said:
I got it to boot !!! I re-ran the joupunut thing , and tried doing the wire-trick before the phone even shows any sign , instantly the PC showed that qhsusb mode , and everything went alrighty !! Maybe this can be an answer for others !
Click to expand...
Click to collapse
troubleshoot
glad for you man
seaskyways said:
I got it to boot !!! I re-ran the joupunut thing , and tried doing the wire-trick before the phone even shows any sign , instantly the PC showed that qhsusb mode , and everything went alrighty !! Maybe this can be an answer for others !
Click to expand...
Click to collapse
Hello, I am having a simliar issue with the Windows driver error coming up when trying to get S-Off after the wire trick. I was able to restore fine, but everytime I am about to get a successful wire trick it gives me the driver error.
Can you tell me what you did? Thank you!
whohitme said:
Hello, I am having a simliar issue with the Windows driver error coming up when trying to get S-Off after the wire trick. I was able to restore fine, but everytime I am about to get a successful wire trick it gives me the driver error.
Can you tell me what you did? Thank you!
Click to expand...
Click to collapse
Please try and use my Guide here http://forum.xda-developers.com/showthread.php?t=2247319 i am very confident if used it will be fine and should let you proceed without any errors