I have xperia SL version 4.0.4. Actually, it used to be 4.1.2 but I flashed it to MIUI then I flashed it back to firmware 4.0.4 (becasue of some problems found while using MIUI) because I could not find the firmware 4.1.2. Luckily, I got OAT update of version 4.1.2 LT26ii_6.2.B.0.200. When I completed download the update, and press install update, my phone turned off and then it turned on again with the message: could not install update. I tried download that again but the same thing happened. I tried to use Sony pc companion to update through computer. Yes, it has found the latest update for it 4.1.2 LT26ii_6.2.B.1.96. But I dont know why? while I am downloading the update, it never completes. when it is nearly 100 percent then it started to download again with like 0 percentage. I also tried that twice, the same thing happened, Why?
Btw, I am new to the website and I know very little about android. thank in advance!
Related
To update from kies, do i need to be unrooted (running stock rooted)... If so, how do you unroot GT 3113??
kan_bleach said:
To update from kies, do i need to be unrooted (running stock rooted)...
Click to expand...
Click to collapse
Nope, you don't have to do anything. Just connect your tab via usb cable and run Kies. If a FW update is available you will be notified as soon as the Kies start...
JIMBOAthens said:
Nope, you don't have to do anything. Just connect your tab via usb cable and run Kies. If a FW update is available you will be notified as soon as the Kies start...
Click to expand...
Click to collapse
I am doing that but kies keeps on disconnecting....though this is the issue with most of the people right now..
kan_bleach said:
I am doing that but kies keeps on disconnecting....though this is the issue with most of the people right now..
Click to expand...
Click to collapse
bro no matter rooted or unrooted when connected to kies it will show update if available.and disconnection problem is with most of tab 2 user.so there are two ways wait for fota or go to service center and get tab updated.
I've tried to update my rooted P3113 from wifi download, not by KIES.
No success! It must be because of the CWM recovery installed, since the tab automatically boots to recovery after downloading updates from samsung. I think the samsung official update scenario stucks at this point (because there is no standart android recovery after CWM installed).
When i'm trying to update rooted P3113 from KIES - no success too, because of "disconnection" problem.
So, we waiting for the stock 4.0.4 rom file for CWM recovery.
Root or unrooted doesn't matter. My tablet is stock and never rooted and Kies was still messing up. Luckily I finally got the OTA this morning.
When I checked for update from my device. It says no update is available. How to get the update?
Sent from my GT-P3113 using xda app-developers app
I have a Galaxy Tab 2 7.0 that was rooted and the other day when I turned it on it started updating my tablet. However, the update failed. Probably because I was rooted. So I unrooted the tablet and every time I check for updates it says there are NO updates. I installed Kies on Windows and (after connecting to it with the GTab2 7) it shows me that there IS an update for it. However, every time I click on update it disconnects after a few seconds and and goes back to the initial screen saying there is an update.
So, I can't install it via Kies. And now I when I check for updates it says there are NO updates. Am I totally screwed OR what.
When the update failed, I think when it rebooted to install it THAT it came up to CWM and that is why it failed BUT now CWM is gone and I am definitely NOT rooted with stock ROM on the machine.
However, I see in the settings under STATUS that is shows "modified" instead of "normal".
Is there any way to reset the status? Or is it necessary?
---grobin
grobin said:
I have a Galaxy Tab 2 7.0 that was rooted and the other day when I turned it on it started updating my tablet. However, the update failed. Probably because I was rooted. So I unrooted the tablet and every time I check for updates it says there are NO updates. I installed Kies on Windows and (after connecting to it with the GTab2 7) it shows me that there IS an update for it. However, every time I click on update it disconnects after a few seconds and and goes back to the initial screen saying there is an update.
So, I can't install it via Kies. And now I when I check for updates it says there are NO updates. Am I totally screwed OR what.
When the update failed, I think when it rebooted to install it THAT it came up to CWM and that is why it failed BUT now CWM is gone and I am definitely NOT rooted with stock ROM on the machine.
However, I see in the settings under STATUS that is shows "modified" instead of "normal".
Is there any way to reset the status? Or is it necessary?
---grobin
Click to expand...
Click to collapse
Dude how did you unroot???
kan_bleach said:
Dude how did you unroot???
Click to expand...
Click to collapse
You don't need to unroot, just flash 4.0.4 firmware with odin as i described in this topic
Download firmware from http://samsung-updates.com/device/?id=GT-P3113
You will have unrooted stock firmware after flash complete. And after that you install cwm and root just as you did with 4.0.3
One way is to just flash it in Odin.
I used this: http://forum.xda-developers.com/showthread.php?t=1645295
This seems to be a pretty foolproof "restock" method.
The only UNROOT method that worked for me!
kan_bleach said:
Dude how did you unroot???
Click to expand...
Click to collapse
The only METHOD that UNROOTED my Galaxy Tab 2 7.0 P3113 was the instructions at this web site :
http://www.androidauthority.com/galaxy-tab-2-7-0-p3113-root-clockworkmod-recovery-96474/
It's a 2 step process. I tried several other places that had similar instructions BUT this one worked. You have to download several files and the recovery rom file has 2 different versions and you choose the one that is appropriate for your situation. I was NOT sure which was appropriate so I tried both and it finally worked.
And it DOES unroot it.
And later that night JUST after midnight I was AGAIN notified on my GT2 7 that I had an update. This time it downloaded the 200+ mb file and rebooted and came up and installed it perfectly!
And every thing is working well now and I am on 4.04. It is SO much smoother than 4.03. A real keeper until Jelly Bean comes available.
----grobin
Ha ha well I should have read this thread before I did a factory reset and installed kies on like 5 computers. Come on samsung.
barmalei7 said:
You don't need to unroot, just flash 4.0.4 firmware with odin as i described in this topic
Download firmware from http://samsung-updates.com/device/?id=GT-P3113
You will have unrooted stock firmware after flash complete. And after that you install cwm and root just as you did with 4.0.3
Click to expand...
Click to collapse
The samsung-updates.com link does not work.
Please give link to any working GT-P3113 firmware download please.
Got the official update today, was so excited. did not relise i would have so much trouble with it. first off i didnt relise having a rooted phone even with stock rom meant i could not install it. so i followed a few tutorials on here and installed my original RUU was fine but now after it all working, i downloaded the update and its reboots and comes up with an android phone with a red triangle then reboots. so i googled it and thought it my be recovery problem. so i re unlocked my phone. flashed the original ville_recovery_signed.img. re ran the ruu exe and all went well. downloaded the updated officialy again and still the same error? i have no idea what to do next, any help?
Thanks
I own a Galaxy Note 10.1 WiFi N8010, was bought in Germany quite some time ago (so CSC is German),
It came with 4.0.3, which was later updated to 4.0.4 and then to 4.1.1. Currently it is running Jellybean 4.1.1.
I had found the Exynos exploit and used it to root my device. The 4.1.2 update came out so I unrooted my device.
The "Device Status" shows "OFFICIAL".
The device received an OTA package, started installing it, started the count to 100%, and at 28-29 percent, the update stopped, the device rebooted, reported a failure and sent me to KIES.
I have some problems with KIES so I am looking for other solutions.
I thought maybe I'd use Mobile Odin to flash the stock firmware but I found it needed a flashkernel which I do not know how nor want to install right now. I was thinking about using ODIN to flash the firmware, but the size of the firmware scared me. I am used to flash 300MB SBF files on my Motorola Defy but this 1GB firmware is insane! I am afraid my computer will suddenly shut down and I will get a hard brick. Anyway, assuming I got over this fear, I have a couple of questions:
1. Does flashing with ODIN delete the user data?
2. Assuming I want to delete my data (like factory reset) - what options should I choose in ODIN when I flash?
3. Are there any options not including ODIN, KIES or the computer in general?
Guys,
Incredible thing has happened, my GT 7.7 told me today: you have new firmware available to download !! First time in its freakin' life it told me that OTA update is available. What's more - it's JB - when almost everybody lost their hope to see it on 7.7.
My happiness didn't last long. OTA upgrade downloaded and after reboot - showed Android system update icon ... for 10 sec. Then it rebooted again. When system boot up - i found no change to 7.7 FW. When i tried to force another attempt to update - i got error message telling me "Update has failed... bla bla bla. Try using Kies".
OK - let it be. I started Kies. Installed update it prompted me and ... found message "Your device’s current firmware version is not supported via Kies". Great !!
My 7.7 is rooted (4.0.4), de-bloated (a lot of junk is gone (including stuff like Samsung Account and other Samsung bloatware).
Now question: If I flash new FW via Odin - will this flash clear my whole 7.7 or my existing apps and data will remain intact?
I think data/aps should "survive" Odin flashing (I don't remember what i did when i upgraded to ICS but i think I flashed with Odin and everything survived).
Another thing - do you think ti's better to wait for Kies upgrade that will support my 7.7 FW upgrade or heat up Odin and forceburn JB into it.
Thanks for advice (in advance).
kies wont upgrade root device with custom recovery... so i say go odin way...
Hi guys, a couple of months ago I've rooted my new S2+ and after Alex posted the new 4.2.2 I've flashed my device with RDS_GT-I9105P-XEO-I9105PXXAMC2 (topic here GT-I9105/I9105P Stock Prerooted Firmware Without loss of warranty(4.2.2) http://forum.xda-developers.com/showthread.php?t=2334103).
So far it is working perfect! This week I've received a notification, that there is a new update available OTA for my device, so I've decided to download and install it. I've downloaded it, the phone restarts and starts to install the "new update", but at 25% shows an error (the Android guy wearing the red triangle etc. and reboots automatically).
After the restart the OS boots normally and is working OK as previous.
My question is: Since my phone has a prerooted stock FW (4.2.2) and is rooted at the same time running CWM, why I can't install the latest updates OTA?
If CW is causing this, why am I able to get the OTA update notification?
Thanks for the replies.
boyansky78 said:
Hi guys, a couple of months ago I've rooted my new S2+ and after Alex posted the new 4.2.2 I've flashed my device with RDS_GT-I9105P-XEO-I9105PXXAMC2 (topic here GT-I9105/I9105P Stock Prerooted Firmware Without loss of warranty(4.2.2) http://forum.xda-developers.com/showthread.php?t=2334103).
So far it is working perfect! This week I've received a notification, that there is a new update available OTA for my device, so I've decided to download and install it. I've downloaded it, the phone restarts and starts to install the "new update", but at 25% shows an error (the Android guy wearing the red triangle etc. and reboots automatically).
After the restart the OS boots normally and is working OK as previous.
My question is: Since my phone has a prerooted stock FW (4.2.2) and is rooted at the same time running CWM, why I can't install the latest updates OTA?
If CW is causing this, why am I able to get the OTA update notification?
Thanks for the replies.
Click to expand...
Click to collapse
that is because it is a modded firmware
safariking said:
that is because it is a modded firmware
Click to expand...
Click to collapse
I understand that the FW is modded, as the previous one (4.1.2), which I've downloaded from here and installed on my G2+. But with 4.1.2 at that time I wasn't able to check for any updates for my OS. Every time I've checked manually for updates, the OS gave me error message, that this is not possible. And now with 4.2.2 I am not only able to check if my FW is the latest, but also to download and install 1/4 of the updates. I am trying to find the algorithm here.
boyansky78 said:
I understand that the FW is modded, as the previous one (4.1.2), which I've downloaded from here and installed on my G2+. But with 4.1.2 at that time I wasn't able to check for any updates for my OS. Every time I've checked manually for updates, the OS gave me error message, that this is not possible. And now with 4.2.2 I am not only able to check if my FW is the latest, but also to download and install 1/4 of the updates. I am trying to find the algorithm here.
Click to expand...
Click to collapse
I will say it again
It is not possible to check for updates because the Firmware is modded and not original anymore that's why!!!
Hi "safariking",
In the current situation we have two identically modded FWs, but a different outcome.
It's very nice of you to take the time to answer my question so fully That's why I'd like to thank you for the effort. Herewith I am closing the topic.
Cheers.
No probs guy i will repeat myself 100 times no problem
Verstuurd van mijn GT-I9105P
safariking said:
No probs guy i will repeat myself 100 times no problem
Verstuurd van mijn GT-I9105P
Click to expand...
Click to collapse
chill down everyone safari bro,this guy trying to say he got updated with mod fw,just when reach certain percent,the downloaded file seems corrupted. Now i understand mod fw can't even received the ota file,but how this process is allowed, and what happened with the ota file he downloaded?
either way,it's pointless,1st the phone fail to update completely(stuck at 25%), 2nd i don't think this problem can be solved.
cheers everyone~ :highfive:
nickchk said:
chill down everyone safari bro,this guy trying to say he got updated with mod fw,just when reach certain percent,the downloaded file seems corrupted. Now i understand mod fw can't even received the ota file,but how this process is allowed, and what happened with the ota file he downloaded?
either way,it's pointless,1st the phone fail to update completely(stuck at 25%), 2nd i don't think this problem can be solved.
cheers everyone~ :highfive:
Click to expand...
Click to collapse
Hi Nick,
Thanks for your reply. You are reading my mind. The issue is really interesting & I think it is worth discussing this.
Safari is right, when he says that FW upgrade OTA for customized ROM is not possible. This is of course true and no one has ever doubted it. This is why when I had the 4.1.2 installed on my G2+ no update was even possible. Droid detects immediately, that the OS has been modified and that you are not running stock ROM.
Okay, so far so good.
Now I have pre-rooted 4.2.2 installed on my phone. When I hit the "Check for update button" it detects that my OS is genuine (although it is not), downloads the whole update package (see screenshot), restarts the phone (part of the update process) and starts installing the update. When the installation reaches 25%, an error message appears saying, that an error has occurred. The phone restarts and loads the "old" OS.
I have tested this a several times and it always hangs on 25%.
The question is NOT why I CAN'T install OTA updates on modified ROM. The question is why I CAN download and install OTA updates on modified ROM.
My suggestion is that:
ROM 1 (4.1.2) had a modified kernel. That's why the OTA updates were not possible.
ROM 2 (4.2.2) is pre-rooted. And I assume it is just stock FW (kernel not modified) with few modifications in the user permissions. This would explain the OTA update and why it reaches download mode and hangs on 25% of the installation.
I hope this brings more clarification to the situation and this would be useful to all members of the forum.
Cheers!:highfive:
I have randomly come across and read posts and topics on this in the other devices' forum.
If I remember correctly, it is the custom recovery, i.e Cwm or twrp that blocks or interrupts the OTA process. 2 reasons why: you'll lose root access if the update went through. Secondly, if a user freezes or uninstalls stock apps like S Voice, Chat On etc, there will be trouble.
There are some ways of allowing an OTA to get pass a custom recovery. I think TWRP has this feature. Again, I stand corrected here lol.
Heard of OTA Root Keeper but no idea how it works
Sent from my GT-I9105 using xda app-developers app