I have the original back, the Quick Circle cover, and the Powermat Quick Circle Cover.
I like the wireless charging, but sometimes, I want the QC cover gone. It's annoying to have the flap while playing games, etc.
I know that the original back is a little tight. Can I buy a QI cover off of ebay, remove the QI sticker, and replace with a PMA sticker, with enough space?
Thanks in advance,
XC
Related
I am not having luck finding a protective case that will fit the 1020 with the wireless cover on the phone. If anyone finds a TPU type case, please post a link.
Those cases cover the video stereo microphone
Sent from my RM-877_nam_att_205 using Tapatalk
Im looking for a case too that fits wireless shell.
hate to add another "we are looking as well" post but we are.
wife bought a silicone cover (hasnt arrived yet) i thought if it didnt quite fit we could use a hair dryer to make it more pliable to get it over top. Id prefer a hard case for mine ive used otterboxes on all my phones for years but im rather excited about the wireless charging hate the fact it looks like i get one or the other.
Scoobydumb said:
hate to add another "we are looking as well" post but we are.
wife bought a silicone cover (hasnt arrived yet) i thought if it didnt quite fit we could use a hair dryer to make it more pliable to get it over top. Id prefer a hard case for mine ive used otterboxes on all my phones for years but im rather excited about the wireless charging hate the fact it looks like i get one or the other.
Click to expand...
Click to collapse
just do this lads
Interesting thing about Wireless charging in 1020, is fact that grossly overpriced wireless charging back hauses ONLY induction coil and connector, nothing else. That is why i thibk it is waaay overpriced than it should be. (universal wireless charging coil from china, that has buil in conversion circuit, costs about $6). I've got one of these, and taped it to the inside of my nilkin case (connector was a big problem) and it works. If you do not want to mess with connector fabrication, you can use original wireless charging back. Juzt sumply warm it up with hairdryer, and peel off the adhesive with coil. Then apply it to your case of choice, and voila, wireless charging with your favourite case.
1020 supports wireless charging ?
Not out of the box, but with the right case yes.
Sent from my Nexus 5 using XDA Free mobile app
he3r0 said:
Interesting thing about Wireless charging in 1020, is fact that grossly overpriced wireless charging back hauses ONLY induction coil and connector, nothing else. That is why i thibk it is waaay overpriced than it should be. (universal wireless charging coil from china, that has buil in conversion circuit, costs about $6). I've got one of these, and taped it to the inside of my nilkin case (connector was a big problem) and it works. If you do not want to mess with connector fabrication, you can use original wireless charging back. Juzt sumply warm it up with hairdryer, and peel off the adhesive with coil. Then apply it to your case of choice, and voila, wireless charging with your favourite case.
Click to expand...
Click to collapse
Can you advise on the connector and which pin is + and -?
Id be keen to try and make my own case if its a generic coil
I am looking for a charging dock, for office desk, to use it with my s4 + protective cover on it. The original one is a bit more fancy (don't really need multimedia features) and a bit expensive just to use it for charging.
I have this case : http://www.amazon.com/Samsung-Protective-Bumper-Cover-Galaxy/dp/B00BUIG6E0 (original s4 protective cover)
I am looking to buy some cheap docks that will charge the phone with protective cover is on. I checked dx.com mainly, but ebay is okay also.
I ordered a s-view flip cover, I've also wanted to start using wireless charging.
can the s-view flip cover and qi wireless receiver work in one phone.? I see the s-view flip has its own back cover with chip in it. Would this effect the wireless charging if i install third party qi receiver?
anyone recommend me a good combo kit for wireless charging... (receiver+pad) i.e no heat, faster charging..?
also is there extended battery (same size as stock battery) that fits phone .(3000/3200mah) i can't seem to find any.
any help will be much appreciated.
also can the non-oem batteries be charged wirelessly.?
ministerjee said:
I ordered a s-view flip cover, I've also wanted to start using wireless charging.
can the s-view flip cover and qi wireless receiver work in one phone.? I see the s-view flip has its own back cover with chip in it. Would this effect the wireless charging if i install third party qi receiver?
anyone recommend me a good combo kit for wireless charging... (receiver+pad) i.e no heat, faster charging..?
also is there extended battery (same size as stock battery) that fits phone .(3000/3200mah) i can't seem to find any.
any help will be much appreciated.
Click to expand...
Click to collapse
Return the flip cover and get the s-view cover that already has the built in QI receiver. That way everything will work perfectly and you'll retain your ip67 rating.
GoBears said:
Return the flip cover and get the s-view cover that already has the built in QI receiver. That way everything will work perfectly and you'll retain your ip67 rating.
Click to expand...
Click to collapse
well, this is the one i want, i do not want to buy the s-view flip cover with built in charging, also its more expensive.. what qi receiver will work with such a cover.?
http://www.amazon.com/Samsung-Wallet-Flip-Cover-Galaxy/dp/B00ITI23GO/ref=cm_cr_pr_product_top
Ah I see. As long as you're not concerned with losing the ip67 rating of the device, any QI receiver for the S5 should fit under that cover. I'm using a cheapo receiver from ebay with no issues and it even works through my Otterbox wallet case which is pretty thick. Mine was less than 8 dollars.
The official wireless Qi charging door adds a few millimeters to the thickness. I had a Body Glove case over the phone but now it's a little tight and the case bows down the edge site.
Does anyone else have the wireless Qi door and case? If so, what case are you using and how well does it fit?
I found a partial answer here: http://forum.xda-developers.com/note-edge/accessories/note-edge-flip-wallet-qi-wireless-t2950494
Following the instructions in that thread I was able to crack open the Samsung OEM Qi Charging Door, pull out the Qi charging pad, and "transplant" it into the original plastic battery door. It created some raised spots on the back but the door clips shut all the way around and you can barely tell there are any raised spots once you put a case around the phone.
My current case is a Body Glove Satin Series. With this modification the case fits pretty good with just a slight wobble when laying it flat.
Did anyone find an answer to this without doing the mod?
has anybody tried tris combo? i got a 3rd part Qi receiver but wont charge with the charger when the UAG case on. without the thickness of the case it will charge. will the original samsung qi back case charge with the uag on?
thanks!
ans3288 said:
has anybody tried tris combo? i got a 3rd part Qi receiver but wont charge with the charger when the UAG case on. without the thickness of the case it will charge. will the original samsung qi back case charge with the uag on?
thanks!
Click to expand...
Click to collapse
Have not read the threads?
Yes the OEM Qi charging works fine as does NFC with UAG case.
NO.. the UAG case does not fit with the wireless Qi back. So either take off the back of the Qi wireless plate, or take the Qi wireless receiver out of the OEM note edge wireless back plate, and place it inside the OEM non-wireless back plate, and fit in the UAG, and it will both fit and work.
its interesting y my Qi receiver was nt working with UAG installed, will test furtherthanks for the reply! any idea wat are to extra pins for in the orig samsung back cover?,
drexd said:
Have not read the threads?
Yes the OEM Qi charging works fine as does NFC with UAG case.
NO.. the UAG case does not fit with the wireless Qi back. So either take off the back of the Qi wireless plate, or take the Qi wireless receiver out of the OEM note edge wireless back plate, and place it inside the OEM non-wireless back plate, and fit in the UAG, and it will both fit and work.
Click to expand...
Click to collapse
Thanks! I carefully popped the plastic piece off the QI Edge back. I then used a thin blade to cut the QI receiver from the plastic and lined it up and popped the original back on and it charges wirelessly and now with the UAG case.