Database Info

[Q] xperia st23i DEAD

Install instructions:
first time
- power off the phone:
- hold vol+ and plug usb to boot into fastboot (blu led)
- fastboot flash boot boot.img (from cm10 zip)
- fastboot reboot
- enter recovery, on boot led will be violet for 3'', during this period press vol+
- flash rom zip
- flash gapps zip
- wipe
- reboot
----------------------------------------------------------
after fast reboot i disconect device to go to recovery in cwm, but i shouldnt do that and i should waited for violet led and continue that,so my xperia miro st23i is now dead, is there any help with flashtool or similar things to revoke my phone, or i should rma it ? thank you very much ((((

Try repair using Pc Companion.
If dont work use flashtool,
Download and flash a firmware .ftf for Xperia st23.
This is a french tutorial:
http://www.phonandroid.com/forum/xperia-miro-installer-un-firmware-kernel-officiel-t30288.html
Sent from my ST25i using xda app-developers app

in device manager it says semc flash device, seus update says hone has modified software and cannot be updated, flashtool 0.9.8 see device and it says device connected in flash mode, but when i click on flash it says error preparing files, and i did download ST23i_4_0_4_xperia.ftf, that its official firmware,. help

keewee23 said:
in device manager it says semc flash device, seus update says hone has modified software and cannot be updated, flashtool 0.9.8 see device and it says device connected in flash mode, but when i click on flash it says error preparing files, and i did download ST23i_4_0_4_xperia.ftf, that its official firmware,. help
Click to expand...
Click to collapse
Download again the ftf. Follow this tutorial
http://translate.google.be/translat...aller-un-firmware-kernel-officiel-t30288.html

vol up gives adb mode, vol down gives flash mode, tryed flashboot boot boot.img, then flash reboot, nothing, tryed flashtool 0.9.9m stuck on reading device information, flashtool 0.6.8.0, says unpluged the device press and hold back button, it's xperia miro, back button is on touchscreen, help

SUCCESSFULLY FLASHED with flashtool by tutorial from that french forum, thank you, BUT, when i turn on phone it wont start green led blink once and nothing, i dont have locked bootloader maybe is that a problem?

PHONE REVIVED FROM THE DEAD :laugh:, THANK YOU, METHOD 2 from that french forum SAVED MY PHONE , THANK YOU

Sent from my ST25i using xda app-developers app

keewee23 said:
PHONE REVIVED FROM THE DEAD :laugh:, THANK YOU, METHOD 2 from that french forum SAVED MY PHONE , THANK YOU
Click to expand...
Click to collapse
did you use flashtool for reviving your phone???is it your phone is miro????please help me...my phone is dead now and i cant resurrect it...please help me...
---------- Post added at 03:48 AM ---------- Previous post was at 03:15 AM ----------
keewee23 said:
PHONE REVIVED FROM THE DEAD :laugh:, THANK YOU, METHOD 2 from that french forum SAVED MY PHONE , THANK YOU
Click to expand...
Click to collapse
i performed the method 2 from flasher official kernel.....you did perform that to revive your miro right???the problem is...i'm stucked in "reading device information" thing....did you also experienced it???should i be worrying about it??or is it normal.......any help please????please......i'm begging you and i'm stuck in this problem for a couple of days....any help and reply will be a great thing to me......

How to Fix Dead Miro
I was Flash Rom my Miro and i got dead i downloaded flash 0.8.0 and 0.8.6 but when i connect my phone it show green light but its doesn't show in flash tool show some error and closed plz help which version of flash you used . i really need help :crying:

[CWM & TWRP ][Holly-U19][Flashify]CWM Recovery Installion Procedure Through Flashify

[CWM & TWRP ][Holly-U19][Flashify]CWM Recovery Installion Procedure Through Flashify
"Click Here To Join Facebook Group
Click Here To Like Facebook Page​
1.Download CWM Recovery For Huawei Honor Holly Mediafire|4Shared|DataFileHost
OR
Download TWRP Recovery (Ported By mdfzhi) Click Here To Download
2.Copy CWM Recovery.IMG To Your SD Card
3.Now Install Flashify in Your Device PlayStore Link|MediaFire Link
4.Now Open Flashify
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
5.Now Accept The Warning
6.Now Allow Root Permission To Flashify
7.Now Wait For The Flashify To Gain Complete Root Access
8.Now Click On Recovery Image in Flashify
9.Now Click On Choose A File
10.Now Click On File Explorer
11.Now Click On SD Card
12.Now Choose CWM Recovery IMG Which You Download in 1st Step
13.Now Select The Option YUP !
14.Now Your CWM Recovery is Being Flashed Wait For The Flashing To Complete Then Reboot The Device Into Recovery

No Reply ?

???

...

Thanks for the CWM recovery. :good:
Been using Twrp but it still has some bugs.

Thanks For Reply Because No One Replied !

My recovery gone. I cant boot in recovery pls help

Thanks you so much @waqas1412

very good
thank you

samighz said:
very good
thank you
Click to expand...
Click to collapse
Thanks​

Thank you
Sent from my LG-D802 using Tapatalk

I did everything as said above.. My ph rebooted.. Then came to normal again.. How to know whether its worked or not?? I need to install supersu vja recovery.. How to do?? Plss help
---------- Post added at 05:56 PM ---------- Previous post was at 05:45 PM ----------
First i tried twrp.. But when reebooting it went to stock recovery.. So i tried cwm.img.. Wen i click reboot recovery it reboots to normal state instead of going to recovery mode!
---------- Post added at 06:13 PM ---------- Previous post was at 05:56 PM ----------
I did not use sd card.. And i tried cwm after trying twrp.zip ahh unable to go to recovery mode at alll! Pls kindly help

naveen cjj said:
I did everything as said above.. My ph rebooted.. Then came to normal again.. How to know whether its worked or not?? I need to install supersu vja recovery.. How to do?? Plss help
---------- Post added at 05:56 PM ---------- Previous post was at 05:45 PM ----------
First i tried twrp.. But when reebooting it went to stock recovery.. So i tried cwm.img.. Wen i click reboot recovery it reboots to normal state instead of going to recovery mode!
---------- Post added at 06:13 PM ---------- Previous post was at 05:56 PM ----------
I did not use sd card.. And i tried cwm after trying twrp.zip ahh unable to go to recovery mode at alll! Pls kindly help
Click to expand...
Click to collapse
Follow This
Click Here​

Hello sir.. Good evening. Sir am in a trouble that only u can help me to solve it.. Pls spend a few of ur valuable mins to read this.... Sir i followed every word in the rooting guide.. I installed adb installer first.. Handset win driver next and driver auto installer at last.. Then when i installed iroot it said me to download the latest.. I did it too.. I installed.. Then it was connecting to my phone.. I kept it in usb storage mode. Then i clicked root.. It was rooting.. My computer had active internet connection.. Not my phone.. So the i root installed few apps in my mobile as said in the guide.. Then the ph rebooted and in my system.. Root successful appeared.. I was not sarisfied.. Installed root checker.. Then it confirmed that my device is properly rooted.. Then i downloadef root deleter app i think.. Which i used to uninstall the chinese apps.. And one cleaner rom master etc.. Atlast i was left with kingroot and not any chinese app.. Okay? Nw i wanted to install super su.. It asked for binary update.. I clicked normal as i had no custom recovery.. It failed.. So i browsed in xda.. I had to flash a custom recovery to flash super su .zip so i had nw two methods.. One is using flashify and another is using sp flash tool.. Now pls note.. This s wat i did exactly.....
I downloaded flashify.. Downloaded twrp.zip from xda and cwm.img from same xda guide.. Then i opend flashify.. Clicked on zip something which was the third option selected twrp.zip then clicked twrp/philz then yup. It completed quickly then asjed for reboot or flash more.. I clicked reboot and it went to stock recovery only.. Then i came again to flashify... Clicked the second option with image in it.. Then i chose cwm.img. it flashed for a long time then said flash completed.. Flash more or reboot.. Again i clicked reboot.. Now the problem begins.. It vibrated.. Came to honor logo.. Faded away.. Vibrated again honor logo.. The normal boot.. Tried flashing again.. Same problem.. I asked it in xda.. Told me to follow sp flas tool.. (Note:- i trued flashing cwm.img using rashr too.. Same response) then today i downloaded mt65xx preloder.zip , sp flash tool.zip , some scatter txt given in the thread then cwm.img. i connected my ph without battery.. Comp did not detect my ph.. And also could not find mt65xx preloder in the other devices.. Tried removing mc as well as sim cards.. Then too no response.. Tried pressing vol+ then it detected but disappeared again... Then tried with my battery on. It detected but kept on disappearing.. So once it appeared i quickely clicked and followed the procedure and installed the driver.. It said it was successful.. Then opened flas tool.exe and clicked download.. Selected cwm.img.. (My ph was connected with battery.. Sim cards and mc taken off..) Then i switched on my ph.. Removed cable.. Switched off.. Clicked download.. Connected it again.. It showed yellow color progress then complete.. Green circle.. Now comes the hard part.. I trued to enter recovery using vol+ vol- power button... But the same thing happened.. Honor logo.. Vibrate.. Fade away.. Again vibrate honor logo.. Normal boot.. I was abt to cry then.. Did it again.. Connected my ph without battery. No response.. Held vol+ then it appeared then disappeared.. But wen appeared it showed driver already installed.. Then opened sp flash tool switched on my ph.. Switched it off.. Clicked download and connected.. Same yellow progress and green circle.. But am not at all going to the recovery at allllll!!!!! Did i brick my phone?? Am really upset.. Am doing all this to flash supersu.zip.. But i couldnt get into custom recovery.. Tried it all.... Plsssss help me cuz i do not hav any person who knows abt this in my locality.. Pls sir any one pls help me pls... Am struck.. If possible.. Can i jus wipe everything include my root and start all procees(from rooting) from the beginning?? Will it restore my stock recovery Pls helpp me every one... Plss..
---------- Post added at 08:39 AM ---------- Previous post was at 08:38 AM ----------
When i connect my honor holly u19 without battery the comp won't recog it. Only wen i press vol+ it pops up then disappears n seconds.. Do i hav to unlock bootloader?
---------- Post added at 08:40 AM ---------- Previous post was at 08:39 AM ----------
The problem is.. Recovery s missing n my phone. No stock no custom. I want to flash supersu.zip.
---------- Post added at 08:41 AM ---------- Previous post was at 08:40 AM ----------
Tried both flashify and spft method.. Neither worked. Pls read my big post above and help me out.. Am scarred that i bricked my ph pls help.. Response would b helpful.

naveen cjj said:
Hello sir.. Good evening. Sir am in a trouble that only u can help me to solve it.. Pls spend a few of ur valuable mins to read this.... Sir i followed every word in the rooting guide.. I installed adb installer first.. Handset win driver next and driver auto installer at last.. Then when i installed iroot it said me to download the latest.. I did it too.. I installed.. Then it was connecting to my phone.. I kept it in usb storage mode. Then i clicked root.. It was rooting.. My computer had active internet connection.. Not my phone.. So the i root installed few apps in my mobile as said in the guide.. Then the ph rebooted and in my system.. Root successful appeared.. I was not sarisfied.. Installed root checker.. Then it confirmed that my device is properly rooted.. Then i downloadef root deleter app i think.. Which i used to uninstall the chinese apps.. And one cleaner rom master etc.. Atlast i was left with kingroot and not any chinese app.. Okay? Nw i wanted to install super su.. It asked for binary update.. I clicked normal as i had no custom recovery.. It failed.. So i browsed in xda.. I had to flash a custom recovery to flash super su .zip so i had nw two methods.. One is using flashify and another is using sp flash tool.. Now pls note.. This s wat i did exactly.....
I downloaded flashify.. Downloaded twrp.zip from xda and cwm.img from same xda guide.. Then i opend flashify.. Clicked on zip something which was the third option selected twrp.zip then clicked twrp/philz then yup. It completed quickly then asjed for reboot or flash more.. I clicked reboot and it went to stock recovery only.. Then i came again to flashify... Clicked the second option with image in it.. Then i chose cwm.img. it flashed for a long time then said flash completed.. Flash more or reboot.. Again i clicked reboot.. Now the problem begins.. It vibrated.. Came to honor logo.. Faded away.. Vibrated again honor logo.. The normal boot.. Tried flashing again.. Same problem.. I asked it in xda.. Told me to follow sp flas tool.. (Note:- i trued flashing cwm.img using rashr too.. Same response) then today i downloaded mt65xx preloder.zip , sp flash tool.zip , some scatter txt given in the thread then cwm.img. i connected my ph without battery.. Comp did not detect my ph.. And also could not find mt65xx preloder in the other devices.. Tried removing mc as well as sim cards.. Then too no response.. Tried pressing vol+ then it detected but disappeared again... Then tried with my battery on. It detected but kept on disappearing.. So once it appeared i quickely clicked and followed the procedure and installed the driver.. It said it was successful.. Then opened flas tool.exe and clicked download.. Selected cwm.img.. (My ph was connected with battery.. Sim cards and mc taken off..) Then i switched on my ph.. Removed cable.. Switched off.. Clicked download.. Connected it again.. It showed yellow color progress then complete.. Green circle.. Now comes the hard part.. I trued to enter recovery using vol+ vol- power button... But the same thing happened.. Honor logo.. Vibrate.. Fade away.. Again vibrate honor logo.. Normal boot.. I was abt to cry then.. Did it again.. Connected my ph without battery. No response.. Held vol+ then it appeared then disappeared.. But wen appeared it showed driver already installed.. Then opened sp flash tool switched on my ph.. Switched it off.. Clicked download and connected.. Same yellow progress and green circle.. But am not at all going to the recovery at allllll!!!!! Did i brick my phone?? Am really upset.. Am doing all this to flash supersu.zip.. But i couldnt get into custom recovery.. Tried it all.... Plsssss help me cuz i do not hav any person who knows abt this in my locality.. Pls sir any one pls help me pls... Am struck.. If possible.. Can i jus wipe everything include my root and start all procees(from rooting) from the beginning?? Will it restore my stock recovery Pls helpp me every one... Plss..
---------- Post added at 08:39 AM ---------- Previous post was at 08:38 AM ----------
When i connect my honor holly u19 without battery the comp won't recog it. Only wen i press vol+ it pops up then disappears n seconds.. Do i hav to unlock bootloader?
---------- Post added at 08:40 AM ---------- Previous post was at 08:39 AM ----------
The problem is.. Recovery s missing n my phone. No stock no custom. I want to flash supersu.zip.
---------- Post added at 08:41 AM ---------- Previous post was at 08:40 AM ----------
Tried both flashify and spft method.. Neither worked. Pls read my big post above and help me out.. Am scarred that i bricked my ph pls help.. Response would b helpful.
Click to expand...
Click to collapse
i think you flashed wrong img file
---------- Post added at 11:38 AM ---------- Previous post was at 11:34 AM ----------
i had hhh phone ..with all rooted, cwm installed, and it had MIUI v7 installed...but while installing cwm i did not come across it being bricked nor boot loop...I dunno y that happened to you but as i said, maybe u flashed wrong image, and it did not support hhh.
but after cwm installed, even if bootloop occurs, then you can go to cwm and wipe data, dalvik cache, and install a new rom...

I downloaded the same img provided in this thread sir.. Thank you for ur reply.. Pls tell me the steps u followed in detail sir. Did u flash using flashify or spft? If the img s wrong can u pls give me the right one sir?
---------- Post added at 08:24 AM ---------- Previous post was at 08:20 AM ----------
I am unable to go to recovery mode at all sir.. If i want to flash using spft how can i connect my ph? With or without battery?? Without battery it wont recognise my mobile till i press vol+ but that too nly for few seconds
---------- Post added at 08:25 AM ---------- Previous post was at 08:24 AM ----------
Planning to sell this mobile for a good price and get something else.. It disappoints me lot.. And am nit getting proper guidance too

naveen cjj said:
I downloaded the same img provided in this thread sir.. Thank you for ur reply.. Pls tell me the steps u followed in detail sir. Did u flash using flashify or spft? If the img s wrong can u pls give me the right one sir?
---------- Post added at 08:24 AM ---------- Previous post was at 08:20 AM ----------
I am unable to go to recovery mode at all sir.. If i want to flash using spft how can i connect my ph? With or without battery?? Without battery it wont recognise my mobile till i press vol+ but that too nly for few seconds
---------- Post added at 08:25 AM ---------- Previous post was at 08:24 AM ----------
Planning to sell this mobile for a good price and get something else.. It disappoints me lot.. And am nit getting proper guidance too
Click to expand...
Click to collapse
What's Your Problem PM Me !​

Sure i will PM you sir.. And i wanna thank all cuz i successfully installed custom recovery... Thank you all thank you so much xda.. Thank you waqas for your guide. All i wanted is to throw away the kingroot and replace it with super su.. So far i have not tried philz.. So i went for it thru flashify and damn i got i booting into custom recovery.. Installed supersu zip.. Threw away kingroot my ph s perfect... Thank you alllll for your support and care... Am sorry that i was lost in between... Love u all

naveen cjj said:
Sure i will PM you sir.. And i wanna thank all cuz i successfully installed custom recovery... Thank you all thank you so much xda.. Thank you waqas for your guide. All i wanted is to throw away the kingroot and replace it with super su.. So far i have not tried philz.. So i went for it thru flashify and damn i got i booting into custom recovery.. Installed supersu zip.. Threw away kingroot my ph s perfect... Thank you alllll for your support and care... Am sorry that i was lost in between... Love u all
Click to expand...
Click to collapse
download any rom...like just in case so that if u hv bootloop, you can install the rom u like...(i prefer MIUI, but it cant run all modules of xposed, it has wsm tools instead)

In philz while i click reboot system now at the bottom there s unmounting sdcard.. Is it correct to appear??
---------- Post added at 05:36 PM ---------- Previous post was at 05:35 PM ----------
And what s the correct and safe and step by step method to flash CM12.1 using philz?? Am a complete noob.. But love android to the core.. Wanna learn things..

[Completed] [HELP] Phone's stuck in recovery mode and cannot be recognized by PC.

I rooted my phone and it worked. But after trying to update it to the newest software, it restarted to the recovery mode. Whenever I try to reboot the phone it always boot me in the recovery mode. I tried flashing the stock ROM but I think the reason why it's not working is that the PC cannot recognize the phone. I've seen an article saying that, that it is caused by an instruction in the misc.img file that somehow doesn't get cleared when I'm trying to reboot the system. Please help. Thanks in advance

Hi,
Thanks for using XDA assist.
Please tell us what phone you are using so you can be directed to the appropriate forum.
gsstudios
---------- Post added at 07:57 PM ---------- Previous post was at 07:54 PM ----------
Thread has been continued here: http://forum.xda-developers.com/general/xda-assist/help-phones-stuck-recovery-mode-t3352953

Samsung s duos GTs7562 stuck at samsung logo

HI all,
I used rashr for flashing my phone(Samsung s duos GTs7562) as it doesn't get connected via USB . I flashed cwm recovery but it was unable to back up the samsung ROM. So I flashed TWRP recovery on my phone using rashr.
The app showed a dialog box which said go to recovery after pressing that my phone is now stuck on samsung logo.
The mobile goes into download mode but I'm unable to used ODIN as the phone is not detected by my PC.
It would be great if somebody can guide me on how to fix this problem.
thanks in advance.

If twrp is working, then flash cwm first and via cwm flash 'stock optimised rom'

Ritik99 said:
If twrp is working, then flash cwm first and via cwm flash 'stock optimised rom'
Click to expand...
Click to collapse
TWRP is not working I can only go to download mode.
But my device doesn't get connected to PC via USB so I couldn't use ODIN or ADB

Try installing samsung kies or usb drivers on computer , phone will get detected after this .
---------- Post added at 03:32 AM ---------- Previous post was at 03:27 AM ----------
Follow this guide, it will help
http://forum.xda-developers.com/showthread.php?t=3246791

Ritik99 said:
Try installing samsung kies or usb drivers on computer , phone will get detected after this .
---------- Post added at 03:32 AM ---------- Previous post was at 03:27 AM ----------
Follow this guide, it will help
http://forum.xda-developers.com/showthread.php?t=3246791
Click to expand...
Click to collapse
I had tried Kies before but it didn't get detected also tried universal ADB drivers and google USB drivers but still it won't get detected. When I connect to PC it says USB device malfunctioned and hence not discoverable
I also tried the SD card method in post you linked but no difference

Then take it to service center they will fix it

Ritik99 said:
Then take it to service center they will fix it
Click to expand...
Click to collapse
I took it to service center but they refused to repair it as it is rooted

rikkupaul said:
I took it to service center but they refused to repair it as it is rooted
Click to expand...
Click to collapse
Go to private repair shops , they will not refuse

Bricked and dead Umidigi A3 - No more detected by PC - How to resolve it?

After wipe data factory reset i got bootloop in TWRP so i decided to reinstall Magisk but no change
after that i decided to flash new Rom
from TWRP i put the phone in bootloader Mod
I waist long time to prepare every thing but phone was no longer responding "Just black screen"
I tried every thing but no reaction from phone and not detected on PC
How could I resolve this?
Many thanks

hectogon said:
After wipe data factory reset i got bootloop in TWRP so i decided to reinstall Magisk but no change
after that i decided to flash new Rom
from TWRP i put the phone in bootloader Mod
I waist long time to prepare every thing but phone was no longer responding "Just black screen"
I tried every thing but no reaction from phone and not detected on PC
How could I resolve this?
Many thanks
Click to expand...
Click to collapse
Don't know if you'll see this but you need to download SP FLASH TOOL and use it to Flash whichever OS is right for your phone
I'll be waiting for a reply

This is it
BlazzerLazzer said:
Don't know if you'll see this but you need to download SP FLASH TOOL and use it to Flash whichever OS is right for your phone
I'll be waiting for a reply
Click to expand...
Click to collapse
ROM Mobile UMIDIGI A3 – ROM Android 8.1.0 ONLY MT6739
ROM 1 Official ROM UMIDIGI Version: UMIDIGI A3 V1.3 20181220 A3
Could you tell me please step by step to get it detected by computer and flash tool.
Under Windows 10.

hectogon said:
ROM Mobile UMIDIGI A3 – ROM Android 8.1.0 ONLY MT6739
ROM 1 Official ROM UMIDIGI Version: UMIDIGI A3 V1.3 20181220 A3
Could you tell me please step by step to get it detected by computer and flash tool.
Under Windows 10.
Click to expand...
Click to collapse
So first thing is first, get the stock image/flash file you want
Then load the android-scatter in the flash tool, then turn the phone off, all the way, plug into your PC and it will flash it for you
---------- Post added at 07:12 PM ---------- Previous post was at 07:09 PM ----------
hectogon said:
ROM Mobile UMIDIGI A3 – ROM Android 8.1.0 ONLY MT6739
ROM 1 Official ROM UMIDIGI Version: UMIDIGI A3 V1.3 20181220 A3
Could you tell me please step by step to get it detected by computer and flash tool.
Under Windows 10.
Click to expand...
Click to collapse
Hold the power button til it starts rebooting
The flash tool will find it before it even gets past startup
It'll reset it and your handset will be as good as new, btw, don't get the a3 pro! The OS looks like ****

When I plug the USB cable I got in device manager Unknown USB device

BlazzerLazzer said:
So first thing is first, get the stock image/flash file you want
Then load the android-scatter in the flash tool, then turn the phone off, all the way, plug into your PC and it will flash it for you
---------- Post added at 07:12 PM ---------- Previous post was at 07:09 PM ----------
Hold the power button til it starts rebooting
The flash tool will find it before it even gets past startup
It'll reset it and your handset will be as good as new, btw, don't get the a3 pro! The OS looks like ****
Click to expand...
Click to collapse
---
When I plug the USB cable I got in device manager Unknown USB device

hectogon said:
When I plug the USB cable I got in device manager Unknown USB device
Click to expand...
Click to collapse
You need to install fastboot drivers for the decide, I just used the universal driver that came with adb tools, which can be downloaded via Google. I cannot post links to those files as a new user, afterwards so flash tool should be able to auto detect and flash your device

I did it
BlazzerLazzer said:
You need to install fastboot drivers for the decide, I just used the universal driver that came with adb tools, which can be downloaded via Google. I cannot post links to those files as a new user, afterwards so flash tool should be able to auto detect and flash your device
Click to expand...
Click to collapse
Could you help me pls with a complet post or we will chat line by line?

Help sim card won't work
I bricked my a3 pro trying to install twrp. I flashed it back to normal using so flash tool but now it won't recognize my sim card. I put my sim in my old phone and it still works. If anyone could help me I would greatly appreciate it thanks