Database Info

Stuck

Hey .. i instaled on my phone clockmod recovery mod and rom manager after i selected flash recovery and my phone restarted and lock on LG Image and usb don't dettected on my pc help me please i try all metods .. (sorry for my english i'm romanian )

read what I wrote in here http://forum.xda-developers.com/showthread.php?t=2442969 use same tool to flash recovery and good luck
---------- Post added at 07:23 AM ---------- Previous post was at 07:23 AM ----------
RomManager isn't compatible with P500 anymore
read all sticky and FAQ threads

Lg
My pc don't read the usb ..

I told you to read posts, install usb drivers and put phone in fastboot mode, is all written there

Canvas 2 not starting.......

DEAR DEVS ,
PLEASE HELP ME I HAVE INSTALLED BELOW ROM ON MY CANVAS 2
http://forum.xda-developers.com/showthread.php?t=2424966
AFTER INSTALLING MY PHONE IS NOT STARTING NOT GETTING INTO CWM RECOVERY NOTHING IS HAPPENING WITH MY PHONE..
BU HU HU.
PLEASE HELP

vinaybhatt2012 said:
DEAR DEVS ,
PLEASE HELP ME I HAVE INSTALLED BELOW ROM ON MY CANVAS 2
http://forum.xda-developers.com/showthread.php?t=2424966
AFTER INSTALLING MY PHONE IS NOT STARTING NOT GETTING INTO CWM RECOVERY NOTHING IS HAPPENING WITH MY PHONE..
BU HU HU.
PLEASE HELP
Click to expand...
Click to collapse
buddy the rom u installed is for canvas HD not for canvas 2
try getting into CWM
and if u r not able to do so then use sptools to flash offical jb/ics to ur phone
hit thanks if i helped:good:

Yes try sp flash tool as bro told you above...
Again remember .....to go to cwm Reinsert charged battery hold power+volume up+volume down
You may know this but sometimes....
Sent from my A110 using xda app-developers app
---------- Post added at 01:33 AM ---------- Previous post was at 01:21 AM ----------
Have you created any backup before installing this ROM
Sent from my A110 using xda app-developers app

[email protected] said:
buddy the rom u installed is for canvas hd not for canvas 2
try getting into cwm
and if u r not able to do so then use sptools to flash offical jb/ics to ur phone
hit thanks if i helped:good:
Click to expand...
Click to collapse
please send me step by step instruction
also tell me how to replace recovery to cwm recovery.
my mobile battery also not charging so i have purchased universal charger after charging i will try again.
but please provide step by step instruction.

vinaybhatt2012 said:
please send me step by step instruction
also tell me how to replace recovery to cwm recovery.
my mobile battery also not charging so i have purchased universal charger after charging i will try again.
but please provide step by step instruction.
Click to expand...
Click to collapse
You should use the sptool.
follow these instructions
1. download SPtool.
2. download official JB
3. download driver of the phone.
download the above files from this post. http://forum.xda-developers.com/showthread.php?t=2167244
4. Install drivers and sptool.
5. Open SPtool.
6. Select 'Scatter file' on the right hand side of soptool.
7.then select Scatter file from the Official JB Folder.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
8. remove battery from the phone.
9. Press "Firmware->Upgrade" button in the sptool.
10. connect the Phone(without battery) to pc.
11. wait till the process complete (A green Circle would be displayed).
12. disconnect phone from pc and insert battery and restart phone.
This should revive you phone.

subhashdas said:
You should use the sptool.
follow these instructions
1. download SPtool.
2. download official JB
3. download driver of the phone.
download the above files from this post. http://forum.xda-developers.com/showthread.php?t=2167244
4. Install drivers and sptool.
5. Open SPtool.
6. Select 'Scatter file' on the right hand side of soptool.
7.then select Scatter file from the Official JB Folder.
8. remove battery from the phone.
9. Press "Firmware->Upgrade" button in the sptool.
10. connect the Phone(without battery) to pc.
11. wait till the process complete (A green Circle would be displayed).
12. disconnect phone from pc and insert battery and restart phone.
This should revive you phone.
Click to expand...
Click to collapse
As given in the image ,please confirm i have to select all checkbox there
android , logo, sec_ro , recovery, bootimg, uboot, EBR1, MBR, DSP_BL AND PRELOADER.

vinaybhatt2012 said:
As given in the image ,please confirm i have to select all checkbox there
android , logo, sec_ro , recovery, bootimg, uboot, EBR1, MBR, DSP_BL AND PRELOADER.
Click to expand...
Click to collapse
Yes u hv to..
Sent from my Micromax A110 using xda app-developers app

Hey just follow this:
1) First perform an uninstall of the MMX/Mobistel drivers you already have on*
your P.C. Install the drivers again.*
2) On the PC/Laptop, start SP flash tool and select the right scatter from the factory stock A110 ROM.*un-tick*all except the first five (Preloader, DSP_BL, MBR, EBR1, UBOOT) + CWM recovery (You should have replaced default recovery with CWM recovery in the ROM folder). Click “Firmware-upgrade, Download.
3) With battery taken off from your phone connect it to the PC/Lap using the USB cable.
4) If your battery was having good charge when you were bricked, you can now power on to recovery mode and flash your CWM saved ROM or any other ROM.
5) If your battery was low, when you were bricked, leave it to charge for an hour before attempting to flash the entire stock ROM through SP flash or CWM.
Sent from my Micromax A110 (Canvas 2) using XDA Premium 4 mobile app

vinaybhatt2012 said:
please send me step by step instruction
also tell me how to replace recovery to cwm recovery.
my mobile battery also not charging so i have purchased universal charger after charging i will try again.
but please provide step by step instruction.
Click to expand...
Click to collapse
there are 2 methods of installing CWM on ur phone
1. spttools 2. rom manger
the easy n simpleast way is using sptools
1.open sptools>click on scatter load>load the scatter file whick u downloaded in the given link
2.now uncheck all the boxes except recovery.img
3.click on recovery n load the cwm .img from the given link
4.click dwld option n enjoy CWM
hit thanks if i helped
LINK FOR CWM http :- http://d-h.st/pan
LINK FOR SCATER LOADING :- http://d-h.st/ue5
:good::fingers-crossed:

vaibhavnriitm said:
Yes u hv to..
Sent from my Micromax A110 using xda app-developers app
Click to expand...
Click to collapse
thank you very much, its back and working fine.
thanks XDA :good:

@moderators just close this thread bcoz the work is complete....otherwise here will pe spams

vinaybhatt2012 said:
thank you very much, its back and working fine.
thanks XDA :good:
Click to expand...
Click to collapse
bro how did u managed to do that ... i am unable to do so... pc not detecting the phone..... help

subhashdas said:
You should use the sptool.
follow these instructions
1. download SPtool.
2. download official JB
3. download driver of the phone.
download the above files from this post. http://forum.xda-developers.com/showthread.php?t=2167244
4. Install drivers and sptool.
5. Open SPtool.
6. Select 'Scatter file' on the right hand side of soptool.
7.then select Scatter file from the Official JB Folder.
8. remove battery from the phone.
9. Press "Firmware->Upgrade" button in the sptool.
10. connect the Phone(without battery) to pc.
11. wait till the process complete (A green Circle would be displayed).
12. disconnect phone from pc and insert battery and restart phone.
This should revive you phone.
Click to expand...
Click to collapse
i tried this out.. it worked.. even i got the green symbol. but when i am trying to restart my phone, it is not booting .. it just gets a backlight and nothing further,.. please help me out

bunty thakkar said:
i tried this out.. it worked.. even i got the green symbol. but when i am trying to restart my phone, it is not booting .. it just gets a backlight and nothing further,.. please help me out
Click to expand...
Click to collapse
buddy donot click on firmware/update button...use download button beside firmware/update button....method is same bt try download button instead of upgrade
& yes i'm sure download can make ur device bootable....it works for me every time when i got bootloop or when my device not boot up.
hit thanks if i helped u

Sdk_Zone said:
buddy donot click on firmware/update button...use download button beside firmware/update button....method is same bt try download button instead of upgrade
& yes i'm sure download can make ur device bootable....it works for me every time when i got bootloop or when my device not boot up.
hit thanks if i helped u
Click to expand...
Click to collapse
bro if i click on download button.. it throws an error like s_da_ check fail (3013) .
what to do ???

bunty thakkar said:
i tried this out.. it worked.. even i got the green symbol. but when i am trying to restart my phone, it is not booting .. it just gets a backlight and nothing further,.. please help me out
Click to expand...
Click to collapse
yes.. finally recovered my phone back
thanks XDA

i dont have any efs folder to back up ..
i flashed a ROM without efs back up
now what should i do
please help me out

canvas 2 not start...
this sptool is not work...
if i restore method is work bt md5 file not generating....
so xda request that proper restore file upload on dev-hosst for canvas 2....
plz upload

my canvas 2 not starting
sir, i rooted my canvas 2 successfully
but one mistake is here i installed 4.1.2 note 3 rom but my canvas 2 have 4.0.4 .
cwm recovery i m not able to restore stock rom
i also treid sp flash tool but nothung happen the procees is not start
sir please help
---------- Post added at 10:04 AM ---------- Previous post was at 09:57 AM ----------
bunty thakkar said:
i tried this out.. it worked.. even i got the green symbol. but when i am trying to restart my phone, it is not booting .. it just gets a backlight and nothing further,.. please help me out
Click to expand...
Click to collapse
sir i tried but the process is not start aftar 5 min also it 0%

help me
vinaybhatt2012 said:
As given in the image ,please confirm i have to select all checkbox there
android , logo, sec_ro , recovery, bootimg, uboot, EBR1, MBR, DSP_BL AND PRELOADER.]
i have installed canvas 2 drivers then to my device is not identifying..help me its not turning on n i tried doing meta mode its not working just i can see in devices and printers alcatel rndis thing ..help me
Click to expand...
Click to collapse

[RECOVERY][CWMv.5.5.0.4][Micromax Canvas XL2][a109][MT6589]ClockworkMod Recovery Port

I have made ClockWorkMod Recovery with help of MTK Droid Tool.
ClockworkMod Recovery for Micromax Canvas XL2 [a109] MT6589
Download
Installation :-
0.Root Canvas XL2 from Here
1.Download the CWM recovery ^^^
2.Download Mobileuncle MTK Tools and Install.
3.In app go to Update Recovery.
4.Select Recovery Img.
5.Update it .It will take some time.
6.After it will Automatically boot in Recovery or In app go to Reboot recovery.
7.Done CWM is Flashed. Enjoy!!
Credits :-
ThunderSky7 for porting.
Jivan for Micromax Canvas XL2 [a109].
rua1 for MTK Droid Tool.
If you like my work then press thanks button.

Thanks man
was trying to use the online cwm builder but it kept failing. have you managed to get busybox to install?
---------- Post added at 04:30 PM ---------- Previous post was at 04:02 PM ----------
First I couldnt get MTK tools to find the img file. (put it in the root of your sdcard everyone). Next, when i said updated recovery, it just took 1 second and said 'reboot into recovery'. when i rebooted, it was still stock recovery. Any help appreciated.
EDIT2: IT WORKS. Use the Flashify tool to flash the recovery img. Now we have CWM. Lets repartition our sdcards and use link2sd!

piggyslasher said:
was trying to use the online cwm builder but it kept failing. have you managed to get busybox to install?
---------- Post added at 04:30 PM ---------- Previous post was at 04:02 PM ----------
First I couldnt get MTK tools to find the img file. (put it in the root of your sdcard everyone). Next, when i said updated recovery, it just took 1 second and said 'reboot into recovery'. when i rebooted, it was still stock recovery. Any help appreciated.
EDIT2: IT WORKS. Use the Flashify tool to flash the recovery img. Now we have CWM. Lets repartition our sdcards and use link2sd!
Click to expand...
Click to collapse
Thanks for the feedback.

how to know cwm is successfully installed or not?

[email protected] said:
how to know cwm is successfully installed or not?
Click to expand...
Click to collapse
1.Reboot in recovery with key combination.
or
1. In MobileUncleTool or In Flashify press reboot recovery to check that recovery is flashed or not.

ThunderSky7 said:
1.Reboot in recovery with key combination.
or
1. In MobileUncleTool or In Flashify press reboot recovery to check that recovery is flashed or not.
Click to expand...
Click to collapse
Can you help me with A109 ROM which can flash using SP Flash Tool. The stock ROM available can be flashed using YFDP tool which my device is not detecting.

Guys can you give me the twrp file of Micromax Canvas XL2 A109

Ranjanlal Nishad said:
Guys can you give me the twrp file of Micromax Canvas XL2 A109
Click to expand...
Click to collapse
This thread may help you
https://forum.xda-developers.com/showthread.php?t=2798257

kgrj said:
Can you help me with A109 ROM which can flash using SP Flash Tool. The stock ROM available can be flashed using YFDP tool which my device is not detecting.
Click to expand...
Click to collapse
Are u searching for ds thread???!!

Yu Yunique Sutck in YU Logo After KingRoot

Hello Friends,
i was trying to root my device with KingRoot and root was successfully done but after restart now my phone is stuck in YU logo, how to bring it back again in normal mode?
please help me.
Thanks

The same problem also faced by me.

Balindra Singh said:
The same problem also faced by me.
Click to expand...
Click to collapse
Flash stock rom with sp flash tools.instructions on yu official forums

mobilenews said:
Hello Friends,
i was trying to root my device with KingRoot and root was successfully done but after restart now my phone is stuck in YU logo, how to bring it back again in normal mode?
please help me.
Thanks
Click to expand...
Click to collapse
Don't worry it happens after rooting a phone. Just boot to recovery mod and try to clear delvil cache and cache , then boot your phone it won't stock in boot logo..trust me boy it works
---------- Post added at 02:41 PM ---------- Previous post was at 02:38 PM ----------
stonemano1 said:
Flash stock rom with sp flash tools.instructions on yu official forums
Click to expand...
Click to collapse
Don't need to flash stock ROM ..

No need to flash stock... Just wipe chacje nd wait first boot will take some time... Coz... First time rooting is a hard nut to crack... If the problem persist then format your phone once... Otherwise use stock... Reply if it works

mobilenews said:
Hello Friends,
i was trying to root my device with KingRoot and root was successfully done but after restart now my phone is stuck in YU logo, how to bring it back again in normal mode?
please help me.
Thanks
Click to expand...
Click to collapse
I had same problem .step 1 - just connect the charger and hold power button for some time . after 1 min release it and wait . if not resolved repeat the steps

Just clear dalvik cache

[Completed] [HELP] Phone's stuck in recovery mode and cannot be recognized by PC.

I rooted my phone and it worked. But after trying to update it to the newest software, it restarted to the recovery mode. Whenever I try to reboot the phone it always boot me in the recovery mode. I tried flashing the stock ROM but I think the reason why it's not working is that the PC cannot recognize the phone. I've seen an article saying that, that it is caused by an instruction in the misc.img file that somehow doesn't get cleared when I'm trying to reboot the system. Please help. Thanks in advance

Hi,
Thanks for using XDA assist.
Please tell us what phone you are using so you can be directed to the appropriate forum.
gsstudios
---------- Post added at 07:57 PM ---------- Previous post was at 07:54 PM ----------
Thread has been continued here: http://forum.xda-developers.com/general/xda-assist/help-phones-stuck-recovery-mode-t3352953