DEAR DEVS ,
PLEASE HELP ME I HAVE INSTALLED BELOW ROM ON MY CANVAS 2
http://forum.xda-developers.com/showthread.php?t=2424966
AFTER INSTALLING MY PHONE IS NOT STARTING NOT GETTING INTO CWM RECOVERY NOTHING IS HAPPENING WITH MY PHONE..
BU HU HU.
PLEASE HELP
vinaybhatt2012 said:
DEAR DEVS ,
PLEASE HELP ME I HAVE INSTALLED BELOW ROM ON MY CANVAS 2
http://forum.xda-developers.com/showthread.php?t=2424966
AFTER INSTALLING MY PHONE IS NOT STARTING NOT GETTING INTO CWM RECOVERY NOTHING IS HAPPENING WITH MY PHONE..
BU HU HU.
PLEASE HELP
Click to expand...
Click to collapse
buddy the rom u installed is for canvas HD not for canvas 2
try getting into CWM
and if u r not able to do so then use sptools to flash offical jb/ics to ur phone
hit thanks if i helped:good:
Yes try sp flash tool as bro told you above...
Again remember .....to go to cwm Reinsert charged battery hold power+volume up+volume down
You may know this but sometimes....
Sent from my A110 using xda app-developers app
---------- Post added at 01:33 AM ---------- Previous post was at 01:21 AM ----------
Have you created any backup before installing this ROM
Sent from my A110 using xda app-developers app
[email protected] said:
buddy the rom u installed is for canvas hd not for canvas 2
try getting into cwm
and if u r not able to do so then use sptools to flash offical jb/ics to ur phone
hit thanks if i helped:good:
Click to expand...
Click to collapse
please send me step by step instruction
also tell me how to replace recovery to cwm recovery.
my mobile battery also not charging so i have purchased universal charger after charging i will try again.
but please provide step by step instruction.
vinaybhatt2012 said:
please send me step by step instruction
also tell me how to replace recovery to cwm recovery.
my mobile battery also not charging so i have purchased universal charger after charging i will try again.
but please provide step by step instruction.
Click to expand...
Click to collapse
You should use the sptool.
follow these instructions
1. download SPtool.
2. download official JB
3. download driver of the phone.
download the above files from this post. http://forum.xda-developers.com/showthread.php?t=2167244
4. Install drivers and sptool.
5. Open SPtool.
6. Select 'Scatter file' on the right hand side of soptool.
7.then select Scatter file from the Official JB Folder.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
8. remove battery from the phone.
9. Press "Firmware->Upgrade" button in the sptool.
10. connect the Phone(without battery) to pc.
11. wait till the process complete (A green Circle would be displayed).
12. disconnect phone from pc and insert battery and restart phone.
This should revive you phone.
subhashdas said:
You should use the sptool.
follow these instructions
1. download SPtool.
2. download official JB
3. download driver of the phone.
download the above files from this post. http://forum.xda-developers.com/showthread.php?t=2167244
4. Install drivers and sptool.
5. Open SPtool.
6. Select 'Scatter file' on the right hand side of soptool.
7.then select Scatter file from the Official JB Folder.
8. remove battery from the phone.
9. Press "Firmware->Upgrade" button in the sptool.
10. connect the Phone(without battery) to pc.
11. wait till the process complete (A green Circle would be displayed).
12. disconnect phone from pc and insert battery and restart phone.
This should revive you phone.
Click to expand...
Click to collapse
As given in the image ,please confirm i have to select all checkbox there
android , logo, sec_ro , recovery, bootimg, uboot, EBR1, MBR, DSP_BL AND PRELOADER.
vinaybhatt2012 said:
As given in the image ,please confirm i have to select all checkbox there
android , logo, sec_ro , recovery, bootimg, uboot, EBR1, MBR, DSP_BL AND PRELOADER.
Click to expand...
Click to collapse
Yes u hv to..
Sent from my Micromax A110 using xda app-developers app
Hey just follow this:
1) First perform an uninstall of the MMX/Mobistel drivers you already have on*
your P.C. Install the drivers again.*
2) On the PC/Laptop, start SP flash tool and select the right scatter from the factory stock A110 ROM.*un-tick*all except the first five (Preloader, DSP_BL, MBR, EBR1, UBOOT) + CWM recovery (You should have replaced default recovery with CWM recovery in the ROM folder). Click “Firmware-upgrade, Download.
3) With battery taken off from your phone connect it to the PC/Lap using the USB cable.
4) If your battery was having good charge when you were bricked, you can now power on to recovery mode and flash your CWM saved ROM or any other ROM.
5) If your battery was low, when you were bricked, leave it to charge for an hour before attempting to flash the entire stock ROM through SP flash or CWM.
Sent from my Micromax A110 (Canvas 2) using XDA Premium 4 mobile app
vinaybhatt2012 said:
please send me step by step instruction
also tell me how to replace recovery to cwm recovery.
my mobile battery also not charging so i have purchased universal charger after charging i will try again.
but please provide step by step instruction.
Click to expand...
Click to collapse
there are 2 methods of installing CWM on ur phone
1. spttools 2. rom manger
the easy n simpleast way is using sptools
1.open sptools>click on scatter load>load the scatter file whick u downloaded in the given link
2.now uncheck all the boxes except recovery.img
3.click on recovery n load the cwm .img from the given link
4.click dwld option n enjoy CWM
hit thanks if i helped
LINK FOR CWM http :- http://d-h.st/pan
LINK FOR SCATER LOADING :- http://d-h.st/ue5
:good::fingers-crossed:
vaibhavnriitm said:
Yes u hv to..
Sent from my Micromax A110 using xda app-developers app
Click to expand...
Click to collapse
thank you very much, its back and working fine.
thanks XDA :good:
@moderators just close this thread bcoz the work is complete....otherwise here will pe spams
vinaybhatt2012 said:
thank you very much, its back and working fine.
thanks XDA :good:
Click to expand...
Click to collapse
bro how did u managed to do that ... i am unable to do so... pc not detecting the phone..... help
subhashdas said:
You should use the sptool.
follow these instructions
1. download SPtool.
2. download official JB
3. download driver of the phone.
download the above files from this post. http://forum.xda-developers.com/showthread.php?t=2167244
4. Install drivers and sptool.
5. Open SPtool.
6. Select 'Scatter file' on the right hand side of soptool.
7.then select Scatter file from the Official JB Folder.
8. remove battery from the phone.
9. Press "Firmware->Upgrade" button in the sptool.
10. connect the Phone(without battery) to pc.
11. wait till the process complete (A green Circle would be displayed).
12. disconnect phone from pc and insert battery and restart phone.
This should revive you phone.
Click to expand...
Click to collapse
i tried this out.. it worked.. even i got the green symbol. but when i am trying to restart my phone, it is not booting .. it just gets a backlight and nothing further,.. please help me out
bunty thakkar said:
i tried this out.. it worked.. even i got the green symbol. but when i am trying to restart my phone, it is not booting .. it just gets a backlight and nothing further,.. please help me out
Click to expand...
Click to collapse
buddy donot click on firmware/update button...use download button beside firmware/update button....method is same bt try download button instead of upgrade
& yes i'm sure download can make ur device bootable....it works for me every time when i got bootloop or when my device not boot up.
hit thanks if i helped u
Sdk_Zone said:
buddy donot click on firmware/update button...use download button beside firmware/update button....method is same bt try download button instead of upgrade
& yes i'm sure download can make ur device bootable....it works for me every time when i got bootloop or when my device not boot up.
hit thanks if i helped u
Click to expand...
Click to collapse
bro if i click on download button.. it throws an error like s_da_ check fail (3013) .
what to do ???
bunty thakkar said:
i tried this out.. it worked.. even i got the green symbol. but when i am trying to restart my phone, it is not booting .. it just gets a backlight and nothing further,.. please help me out
Click to expand...
Click to collapse
yes.. finally recovered my phone back
thanks XDA
i dont have any efs folder to back up ..
i flashed a ROM without efs back up
now what should i do
please help me out
canvas 2 not start...
this sptool is not work...
if i restore method is work bt md5 file not generating....
so xda request that proper restore file upload on dev-hosst for canvas 2....
plz upload
my canvas 2 not starting
sir, i rooted my canvas 2 successfully
but one mistake is here i installed 4.1.2 note 3 rom but my canvas 2 have 4.0.4 .
cwm recovery i m not able to restore stock rom
i also treid sp flash tool but nothung happen the procees is not start
sir please help
---------- Post added at 10:04 AM ---------- Previous post was at 09:57 AM ----------
bunty thakkar said:
i tried this out.. it worked.. even i got the green symbol. but when i am trying to restart my phone, it is not booting .. it just gets a backlight and nothing further,.. please help me out
Click to expand...
Click to collapse
sir i tried but the process is not start aftar 5 min also it 0%
help me
vinaybhatt2012 said:
As given in the image ,please confirm i have to select all checkbox there
android , logo, sec_ro , recovery, bootimg, uboot, EBR1, MBR, DSP_BL AND PRELOADER.]
i have installed canvas 2 drivers then to my device is not identifying..help me its not turning on n i tried doing meta mode its not working just i can see in devices and printers alcatel rndis thing ..help me
Click to expand...
Click to collapse
Related
SP Tool Tutorial & SP Tool Flashable ROMs
DOWNLOADS
SP Tool
Download Latest
Download
Drivers
Mobistel Cynus T1 Driver
MTK Drivers
VCOM Driver Download
ROM
Micromax ICS V1
Micromax ICS V2
MyPhone A919 ICS
Micromax JB V1.10
FLASHING ROM
1)Install Drivers.
2)Open SP tool
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
3)Select 'Android Scatter file' inside ROM folder.
4)Now Shut_Down Canvas 2.
5)Click Firmware_Upgrade Button.
6)Connect Phone{Switched off} to PC via USB Cable.
7)If everythings right,Flashing will proceed..
8)Wait till It finishes..A green ring is displayed on completion..
9)Now Close SP tool..Remove Phone from PC..
10)Switch ON the phone...It is successfully Flashed...
FLASHING PATCH(Single Files)
1)Select Android Scatter File .txt ....
2)Uncheck all files from the below box....
3)Select the correct file you want Flash by clicking it....
4)Click Download button on SP tool.... **"Dont click Firmware Upgrade"
5)A box asks to confirm it...Click Yes...
6)Connect Phone in Switch off State...
7)It will get Flashed...
HIT THANKS PLEASE BECAUSE IT WONT COST ANY :angel:
META-MODE
Meta-Mode is very useful if device fails to get detected by PC under normal Conditions.....To make device fall to Meta-Mode,just do these :
1) Start SP Tool on PC..
2) Now run SP Tool with "Firmware Upgrade/Download"
3) Switch OFF Phone..
4) Remove Battery..
5) Connect mobile to PC while holding Volume + button [WITHOUT BATTERY]..
6) Flashing will be started
7) Hold the button till flashing completes...
8) After 100% Flash,Release Button..
9) Insert Battery..
10) Start Device.. :good:
Note:I am not responsible for Mistakes and Bricked Devices...And dont flash ROM that arent made for A110 unless confirmed by others...
Re: [Tutorial]Flashing ROM via SP tool
will it get bak to our warranty?
Sent from my Samsung GT-S9081 using xda app-developers app
Re: [Tutorial]Flashing ROM via SP tool
coolpartha said:
will it get bak to our warranty?
Sent from my Samsung GT-S9081 using xda app-developers app
Click to expand...
Click to collapse
If you have Warranty period then flash Stock ROM and Warranty is back
Sent from my Micromax A110 Canvas 2 using xda premium
Re: [Tutorial]Flashing ROM via SP tool
Dark4Droid said:
If you have Warranty period then flash Stock ROM and Warranty is back
Sent from my Micromax A110 Canvas 2 using xda premium
Click to expand...
Click to collapse
hnw to flash??? is thr ny jb stock rom?
Sent from my Samsung GT-S9081 using xda app-developers app
Re: [Tutorial]Flashing ROM via SP tool
coolpartha said:
hnw to flash??? is thr ny jb stock rom?
Sent from my Samsung GT-S9081 using xda app-developers app
Click to expand...
Click to collapse
No,For getting Warranty you have to flash only Micromax Official Stock ROM.....JB ROMs are there but you will loose warranty..
Sent from my Micromax A110 Canvas 2 using xda premium
unable to root using your method help
when i clicked on firmware->upgrade it said check weather all images are loaded properly i pressed ok.
i tried to install super pro update but it says installation aborted but doesnt help it always strucks at 0% doesnt move forward no green ring as i only selected recovery and browsed for it on local drive.
i m struck on stock recovery requires cwm becuz i require pre rooted rom help..........
Re: [Tutorial]Flashing ROM via SP tool
tanmay5 said:
unable to root using your method help
when i clicked on firmware->upgrade it said check weather all images are loaded properly i pressed ok.
i tried to install super pro update but it says installation aborted but doesnt help it always strucks at 0% doesnt move forward no green ring as i only selected recovery and browsed for it on local drive.
i m struck on stock recovery requires cwm becuz i require pre rooted rom help..........
Click to expand...
Click to collapse
If you want yo install recovery alone then click Download instead of Firmware upgrade
Sent from my ZP950 using xda premium
i only selected recovery and pressed download then warning message pompt up that
"not all images are properly loaded you still want to continue i pressed ok"
my phone is switched of and then i connected to pc and nothing working on sptool/flash tool
it strucks on 0% and no green ring on sptools
Help me plzzz........
drivers to cynus t2 rom are installed on my pc n can b traced under device manager if debuggging n media is on help......
Re: [Tutorial]Flashing ROM via SP tool
tanmay5 said:
i only selected recovery and pressed download then warning message pompt up that
"not all images are properly loaded you still want to continue i pressed ok"
my phone is switched of and then i connected to pc and nothing working on sptool/flash tool
it strucks on 0% and no green ring on sptools
Help me plzzz........
drivers to cynus t2 rom are installed on my pc n can b traced under device manager if debuggging n media is on help......
Click to expand...
Click to collapse
Not Debugging drivers...Preloader drivers have to be installed
Sent from my ZP950 using xda premium
yeah my mt65xx drivers was not installed after installing/updating from drive i selected mobile cynus t2 under program files and said encounted a problem and cant update drivers so i downloaded MT65xx drivers from xda site and browsed and drivers got installed named is preloade usb vcom(android) Com 4. i used sp flash tools selected scatter file n recovery pressed download
red bar completes 100% and showing enter usb in 15 sec after that i get an error helpp.............
error 8100 cant find usb port
what should i do know
Re: [Tutorial]Flashing ROM via SP tool
tanmay5 said:
yeah my mt65xx drivers was not installed after installing/updating from drive i selected mobile cynus t2 under program files and said encounted a problem and cant update drivers so i downloaded MT65xx drivers from xda site and browsed and drivers got installed named is preloade usb vcom(android) Com 4. i used sp flash tools selected scatter file n recovery pressed download
red bar completes 100% and showing enter usb in 15 sec after that i get an error helpp.............
error 8100 cant find usb port
what should i do know
Click to expand...
Click to collapse
Try other USB port...
Sent from my Micromax™ A110 using xda premium
the result is same bro plz help
help bro plz z z z z i beg u
Re: [Tutorial]Flashing ROM via SP tool
Y dont u use other simpler rooting tools available.. And install cwm via mobileuncle tools.. So u can skip the spflash tool method altogather
Sent from my Micromax A110
simple tools like ????
binary tools are unable to root Jb
mobile uncle says u dont have root access so what should i do
Help me bro
this is the error i get
Re: [Tutorial]Flashing ROM via SP tool
That error is due to failed vcom drivers itself. U need more trial and errors..like pdanet drivers..few Windows restarts.. Well how did u get jb Rom in the first place? Stock jb over stock recovery?
Can you somehow revert to ics again?
Sent from my Micromax A110
Yes by stock recovery ...
Nopes i dont think i cant revert to ics ...
m badly struck yar tired of trying a lot
Re: [Tutorial]Flashing ROM via SP tool
tanmay5 said:
Yes by stock recovery ...
Nopes i dont think i cant revert to ics ...
m badly struck yar tired of trying a lot
Click to expand...
Click to collapse
Is that SP tool and drivers are those I provided through link in the topic...
Sent from my Micromax™ A110 using xda premium
Wheres the link????
i just tried to install dreamboltx on my micromax a27 and it just got bricked that means when i turn it on it just shows up a black screen and vibrates plz help me.......the only thing i can access is fastboot mode plz help
Akshay kapoor said:
i just tried to install dreamboltx on my micromax a27 and it just got bricked that means when i turn it on it just shows up a black screen and vibrates plz help me.......the only thing i can access is fastboot mode plz help
Click to expand...
Click to collapse
Download The stock rom from this link https://drive.google.com/uc?id=0B6-h6iUVgfhJMW8yejZybFlfMXc
And put it in your sd card...
Go to recovery mode and flash this zip file from there...
And don't forget to press thanks if I helped...
but the device is not turning onn so how to go recovery mode
Akshay kapoor said:
i just tried to install dreamboltx on my micromax a27 and it just got bricked that means when i turn it on it just shows up a black screen and vibrates plz help me.......the only thing i can access is fastboot mode plz help
Click to expand...
Click to collapse
N'ayam Amarsh'e said:
Download The stock rom from this link
And put it in your sd card...
Go to recovery mode and flash this zip file from there...
And don't forget to press thanks if I helped...
Click to expand...
Click to collapse
but how to access recovery mode if device is not turning onn
Akshay kapoor said:
i just tried to install dreamboltx on my micromax a27 and it just got bricked that means when i turn it on it just shows up a black screen and vibrates plz help me.......the only thing i can access is fastboot mode plz help
Click to expand...
Click to collapse
Check out this link
http://forum.xda-developers.com/showthread.php?t=2520719
Scroll down to micomax a27 title
Sent from my LG-E610 using xda app-developers app
atulkris said:
Check out this link
http://forum.xda-developers.com/showthread.php?t=2520719
Scroll down to micomax a27 title
Sent from my LG-E610 using xda app-developers app
Click to expand...
Click to collapse
I think you should give it to svc if you are in warranty...
This is simple bro. Just download the stock rom from above link & unzip it, you will find system.img file copy it to your computer's fastboot folder & boot your phone to fastboot & give this command in command prompt "fastboot flash system system.img" and press enter. Then your phone will be ok. If any problem feel free to reply @ my email [email protected].
Sent from my Micromax A27 using xda app-developers app
Akshay kapoor said:
but how to access recovery mode if device is not turning onn
Click to expand...
Click to collapse
flash stock backup via SP flash tool
Hello...
were you able to resolve this?
I m also stuck on this after I messed up my phone OS while playing with it.
---------- Post added at 11:52 AM ---------- Previous post was at 11:42 AM ----------
Can we somehow extract the img's from the .pac file and then use fastboot?
The phone is going into fastboot mode only and doesnt respond to this flashing tool at all.
Please suggest.
I cn help u...i tried to instal dreamvolt in my a27 nd its bricked.nobody give me right solution for it. So i tried myself nd find the solution.
First extract dreamvolt zip nd copy boot.img file into fastboot folder nd goto fastboot mod
Type cmnt " fastboot flash boot boot.img .after losding this file ur phone turn on nd off after showing main page of ur phone then restarts.dnt panic nw ur phone cn flash through sp upgrade tool
Open sp upgrade tool nd load the ".pac" file then goto backup option inthe tool and untic all.nw press ok and press the play butten.reimsert ur phones battery and press vol down , connect usb cable .nw u cn see flashing starts on pc.wait to complete the process.good luck.if its helpful to u pls mail me [email protected]
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Flashing Methodes
SD UPGRADE
SP FLASH TOOL
STOCK RECOVERY
Huawei Honor Holly Stock/Official Frimware
Holly-U19_V100R001C583B105_Firmware_India_Channel-Others_05021QUS.zip
Holly-U19V100R001C328B107.rar Direct link
File Contants.
OTA upgrade.
SD card upgrade.
upgrade tools& drivers.
USB upgrade.
Let's Start.
1.SD UPGRADE METHOD
Downloade the "Holly-U19_V100R001C583B105_Firmware_India_Channel-Others_05021QUS.zip" Extract the file any one location.
Locate the extracted folder and find the software folder.
Goto SD Upgrade Folder Copy the update.zip file To SD card.
Goto System updates Click Local Update and press Next.
Now automatically flashing is started.
2.SP FLASH TOOL METHOD
Install the USB Drivers If they are not already installed on your PC.
Extract out all the files of SP flash too, and double-click on Flash_Tool.exe to open it.
Click On the scatter loading button and select the “Scatter File” that you just downloaded. The real name of the file is “MT6582_Android_scatter_emmc.txt”.
Check the all items are clicked.
and Press download button.
Pull out the device’s battery, and while it’s turned off connect it to your computer via USB cable.
And download started.
when you see Green color tick mark then Disconnect the mobile.
Lets Switch On the mobile.
3.STOCK RECOVERY METHOD
Copy the update.zip to sdcard.
Power off the Mobile.
Now pull the Volume up + Volume Down + Power Button to goto Recovery Mode.
Now You See Stock recovery then goto install from sd card option.
select internal or extranal sd card for copyed update.zip file
and select the update.zip file.
and press yes to flash the Update.
Reserved 1 for pictures
Reserved 2 for Videos
going to Recovery
the steps for going to recovery are:
1.power on the device with vol+ and power
2.after the vibration release power and press vol+ 15 times
3.then press Vol-
then you are in recovery..
you can press the down button twice to get into fast boot mode
BlueFireX22 said:
the steps for going to recovery are:
1.power on the device with vol+ and power
2.after the vibration release power and press vol+ 15 times
3.then press Vol-
then you are in recovery..
you can press the down button twice to get into fast boot mode
Click to expand...
Click to collapse
you using Honor Holly Mobile ??
Panneer Selvam said:
you using Honor Holly Mobile ??
Click to expand...
Click to collapse
yes dude ..thats the only way i can get into recovery
BlueFireX22 said:
yes dude ..thats the only way i can get into recovery
Click to expand...
Click to collapse
but my honor holly mobile is vol+ and vol - and power button...
Panneer Selvam said:
but my honor holly mobile is vol+ and vol - and power button...
Click to expand...
Click to collapse
Strange ..
its okay dude .. keep the same instructions ..
let other people also test..
then we'll know..
Cheers For your Hardwork :good::good::fingers-crossed:
Hi,
thanks for the instruction. It works like a charm and I may confirm that holding vol+, vol- and power get you into stock recovery.
Does anyone know if there is another stock rom version available? I've recognized that the stock rom version above is only english localized and I'm searching for an european localization.
so long greetz
Auto shutdown
MY HUAWEI honor holly ( 3c lite) my phone was stock in logo i try to hard reset but didnt work because my phone was rooted... i update my phone using sd card... update was finished then after that i restart and my phone was auto shutdown.... how can i solve this issue???
yeohaeng said:
MY HUAWEI honor holly ( 3c lite) my phone was stock in logo i try to hard reset but didnt work because my phone was rooted... i update my phone using sd card... update was finished then after that i restart and my phone was auto shutdown.... how can i solve this issue???
Click to expand...
Click to collapse
i want your mobilr model number and build number...?
Panneer Selvam said:
i want your mobilr model number and build number...?
Click to expand...
Click to collapse
can i use this to fix my phone? i cant enter the recovery mode
how to remove cmw
how to remove cmw from honory holly and can u pls give ss of flashing from sd card?
Stuck in Boot loop.
I tried flashing CWM with Flashify, I got flashed but did not boot into it.
So i tried TWRP, same thing happend again.
Finally I have downloaded Holly-U19_V100R001C583B105_Firmware_India_Channel-Others_05021QUS.zip
from the main site. And followed all the instructions given inside the guide.
I successfully flashed the firmware again. But now phone is not booting. Its stuck in boot loop(boots every 15sec).
What should i do? its urgent please help!!
Did holly will have lolipop update?
lfernandeshack said:
Did holly will have lolipop update?
Click to expand...
Click to collapse
no till now
kapilmahawar said:
I tried flashing CWM with Flashify, I got flashed but did not boot into it.
So i tried TWRP, same thing happend again.
Finally I have downloaded Holly-U19_V100R001C583B105_Firmware_India_Channel-Others_05021QUS.zip
from the main site. And followed all the instructions given inside the guide.
I successfully flashed the firmware again. But now phone is not booting. Its stuck in boot loop(boots every 15sec).
What should i do? its urgent please help!!
Click to expand...
Click to collapse
again flash boot.img and recovery.img files only to geting into the recovery mode!
sam837 said:
how to remove cmw from honory holly and can u pls give ss of flashing from sd card?
Click to expand...
Click to collapse
MTK Devices are not support the sd image file flashing methods some devices are working but hhh is not working.
you can only flash via PC with SP FLASH TOOL..
HHH3CLITE said:
can i use this to fix my phone? i cant enter the recovery mode
Click to expand...
Click to collapse
ya .
you can only flash HHH Stock Recovery to recovery mode .
use SP FLASH TOOL
thanks
Panneer Selvam said:
MTK Devices are not support the sd image file flashing methods some devices are working but hhh is not working.
you can only flash via PC with SP FLASH TOOL..
Click to expand...
Click to collapse
thanks for replying. i flashed using flashfy the stock recovery of HHH
my Samsung GT-S7582 won't turn on and hanging on "samsung galaxy Duos GT-S7582 " screen then after 5 seconds this screen appears
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
i tried to boot into recovery mood but it didn't .... i then installed CWM and did a factory reset but it didn't continue and the same strange screen appeared again
what should i do ?
any one can help me please !!!!!
all you need to do download stock rom of your region from here-http://www.sammobile.com/firmwares/database/GT-S7582/
than extract it you got md5 file
than download odin3.07 from here-http://http://odindownload.com/
1-backup all your data
2-switch off your phone,remove battery,simcard,memory card
3-open odin in pc
4-re-insert you battery
5-hold volume down ,home key, power button toughter this will turn your phone into downloading mode
6-press volume up key to continue
7-connect you phone to pc
8-wait for odin massege
9-click pda
10-select md5 file fom where you have downloaded the stock rom
11-click start wait for odin said pass and your device will automatically reboot
done
.
.
.
hit thanks if i help you....:good:
---------- Post added at 03:06 PM ---------- Previous post was at 03:03 PM ----------
boot your phone in the recovery mode and clear system cache and dalvik cache this is sometimes helpfull if this isn't work than flash stock rom as i told you in my previous reply post
.
.
.
hit thanks if i help you...:good:
i did install a stock rom but after finishing with odin and the mobile should do somethings and then open
but all what happened the screen just turned the same as the above and didn't continue
Omar42Nabil said:
i did install a stock rom but after finishing with odin and the mobile should do somethings and then open
but all what happened the screen just turned the same as the above and didn't continue
Click to expand...
Click to collapse
flash twrp recovery with odin
1-download twrphttps://www.androidfilehost.com/?fid=24533100289590386
2-open odin in pc
3-connect you phone to pc (see odin device added msg)
4-click pda
5-select twrp from where you have downloaded
6-untick auto reboot in odin
7-click start
8-wait for odin said reset
9-done dissconnect your phone from pc
10- remove battery and re-insert it
11-press volume up key+home key+power button together
your phone will be boot in twrp recovery!!!!!
.
now do full wipe as shown in this pitchure
.
.
.
and than install stock rom again hope this will help you
.
.
.
hit thanks if i help you...:good:
charlesxd2016 said:
flash twrp recovery with odin
1-download twrphttps://www.androidfilehost.com/?fid=24533100289590386
2-open odin in pc
3-connect you phone to pc (see odin device added msg)
4-click pda
5-select twrp from where you have downloaded
6-untick auto reboot in odin
7-click start
8-wait for odin said reset
9-done dissconnect your phone from pc
10- remove battery and re-insert it
11-press volume up key+home key+power button together
your phone will be boot in twrp recovery!!!!!
.
now do full wipe as shown in this pitchure
.
.
.
and than install stock rom again hope this will help you
.
.
.
hit thanks if i help you...:good:
Click to expand...
Click to collapse
i already tried this before but it hangs on Team Win Logo and nothing happens except the white dotted screen and galaxy logo again :/
Omar42Nabil said:
i already tried this before but it hangs on Team Win Logo and nothing happens except the white dotted screen and galaxy logo again :/
Click to expand...
Click to collapse
have you tried twrp 3.0
here is the link-https://www.androidfilehost.com/?fid=24533100289590386
charlesxd2016 said:
have you tried twrp 3.0
here is the link-https://www.androidfilehost.com/?fid=24533100289590386
Click to expand...
Click to collapse
i tried it right now but nothing happened either
hanging on Team Win logo then after 6 seconds the white screen and then galaxy Logo :/
Omar42Nabil said:
i tried it right now but nothing happened either
hanging on Team Win logo then after 6 seconds the white screen and then galaxy Logo :/
Click to expand...
Click to collapse
have you tried any custom rom
charlesxd2016 said:
have you tried any custom rom
Click to expand...
Click to collapse
NO Not at all
Omar42Nabil said:
NO Not at all
Click to expand...
Click to collapse
try it and use it for 24 hours
than flash stock again
:good:
charlesxd2016 said:
try it and use it for 24 hours
than flash stock again
:good:
Click to expand...
Click to collapse
well , i downloaded a custom rom during the setup just stopped and the white screen appeared and boom nothing happened bootloop again
Any help ?! :'(
help same prob
is this problem already fix?? same prob.
---------- Post added at 01:24 AM ---------- Previous post was at 12:53 AM ----------
install cwm via odin just wait after install for fully reboot dont rush
I had this problem before but i had fixed it
You should download full software files
They are 4 files
Flash them with odin
The phone will work insha' allah
charlesxd2016 said:
have you tried any custom rom
Click to expand...
Click to collapse
I am facing the same issue.
Logically you are right. Same idea struck my head before reading this thread and I have tried all these things. As Cyanogenmod is not found I tried to install a custom rom named 'L-Touch Rom'. But everything has failed till now. So, finally I have to offer a new phone. Still I want to turn on this phone.
If you have official cyanogenmod for GT- S7582 please provide link.
Sumit9404 said:
I am facing the same issue.
Logically you are right. Same idea struck my head before reading this thread and I have tried all these things. As Cyanogenmod is not found I tried to install a custom rom named 'L-Touch Rom'. But everything has failed till now. So, finally I have to offer a new phone. Still I want to turn on this phone.
If you have official cyanogenmod for GT- S7582 please provide link.
Click to expand...
Click to collapse
there is no official cynogenmod or lineage os for gt-s7580/7582
i dont remember any L-touch rom for gt s7582
the last L-touch rom i installed is in gt7562 that is s duos not sdous 2
Sumit9404 said:
I am facing the same issue.
Logically you are right. Same idea struck my head before reading this thread and I have tried all these things. As Cyanogenmod is not found I tried to install a custom rom named 'L-Touch Rom'. But everything has failed till now. So, finally I have to offer a new phone. Still I want to turn on this phone.
If you have official cyanogenmod for GT- S7582 please provide link.
Click to expand...
Click to collapse
hey did your phone fixed right now?
yeah, i fixed it.
The first mistake I did: I installed CWM recovery instead of TWRP. I wish I would have installed TWRP on the firsthand, then I could have saved my useful data saved on my phone.
Below is the detail procedure I followed to fix my phone.
1. I downloaded two stock roms, one of my Indian version (INS) that is installed when I purchased (the latest updated version); another is stock rom of Arabic version. The only reason behind downloading the Arabic version is that the Arabic version had a pit file to re-partion the internal stora[/B][/B]ge and had all 4 md5 files separately (BOOT, CODE, CSC, MODEM) where as in the Indian version I only got the single combined HOME file, which doesn't contain the pit file and BOOT file.
2. I downloaded some custom roms, i.e, AOSP, Lineage latest versions.
3. I installed TWRP with Odin. then booted the phone in recovery mode. I already have transferred the custom roms on my SD Card. First, I cleared the whole internal memory including the OS and then installed one of the roms from recovery mode. Then re-booted the phone. Now the restart problem has gone, but still the phone got stuck on OS logo. I again cleared everything and tried with the other custom rom, but same thing happened.
4. Then I installed the stock rom (Arabic version with Pit file) using Odin without removing the custom rom, as without any OS phone is not detectable by Odin. After that I again installed the stock rom (Indian version without Pit file). After all this I booted the phone and It worked.
Below I am giving the download links for all these files:
TWRP: https://www.androidfilehost.com/?fid=24572369360126141
Odin: http://odindownload.com/download/Odin3_v3.12.3.zip
Stock Rom: Indian INS version- http://dl.sammobile.com/J19cS1s3MD0kIC9GLDteQUxaJjctMjoiVDEsOSBGEx0EUlM0PV4nX1BWV01JW19NRlhTSQ8SGBsAVF9ORVxcTExd/S7582DDUANJ1_S7582ODDANJ1_INS.zip
Indian INU version: http://download1503.mediafire.com/skkqjakvnhig/4797itd8zwb0q5i/S7582DDUANJ1_S7582ODDANJ1_INU_%28by_firmwarelink.com%29.zip
Only Pit File: Find on this thread https://forum.xda-developers.com/s7582/help/request-gt-s7582-pit-file-t3000413
Lineage OS 14: https://www.androidfilehost.com/?fid=529152257862707633
Lineage OS 13: https://www.androidfilehost.com/?fid=529152257862718883
AOSP 7.1.1: https://www.androidfilehost.com/?fid=745425885120698976
Ope Gapps 7.1: https://www.androidfilehost.com/?fid=313042859668276631
Please provide the url for the Arabic firmware
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hello Guys!
This Is TWRP Recovery for Lyf Earth-1 Aka LS-5501
Pre-Req:-
1].Charging must Be At Min. 30%
2].Phone must be rooted For Non-PC Installation
####Installation Steps####
Steps For Installation From PC
1]. Download and Extract The Zip
2].Boot Ur Device into Fastboot mode By pressing Vol.Down and Power Simultaniously until White Screen With Android written on it appears [Note make Sure u have USB debugging Enabled]
3] Run Start.bat And select Option 1 then connect ur device.
4]Reboot And Done U have TWRP recovery installed :good:
####Steps for Without PC####[Root Required]
1] Download Flashify App from Play Store
2]Place Recovery.img in Internal Storage
3]Open App And Select Flash Recovery Option then browse till directory and select .img file
4]Done! You Have TWRP installed With Every Feature working :good:
*IF YOU FACE ANY PROBLEM POST COMMENT OR PM ME:fingers-crossed:
THANKS XDA Developers
CREDITS
Gautam Maini
@@[email protected]@
TWRP Image File :- [Mirror]Google Drive
TWRP Toolkit PC:-[Mirror]Google Drive
Upcoming Threads:- [Xposed]Lyf Earth-1
#####DO HIT THANKS BUTTON IF I HELPED#####
@adalal0 i got ur message So Bootloader unlock command is
First connect ur device to pc in fastboot mode and then Open fastboot terminal and type one of the command given below
1).fastboot oem unlock
Or
2).fastboot oem unlock-go
Gautam Maini said:
Hello Guys!
This Is TWRP Recovery for Lyf Earth-1 Aka LS-5501
Pre-Req:-
1].Charging must Be At Min. 30%
2].Phone must be rooted For Non-PC Installation
####Installation Steps####
Steps For Installation From PC
1]. Download and Extract The Zip
2].Boot Ur Device into Fastboot mode By pressing Vol.Down and Power Simultaniously until White Screen With Android written on it appears [Note make Sure u have USB debugging Enabled]
3] Run Start.bat And select Option 1 then connect ur device.
4]Reboot And Done U have TWRP recovery installed :good:
####Steps for Without PC####[Root Required]
1] Download Flashify App from Play Store
2]Place Recovery.img in Internal Storage
3]Open App And Select Flash Recovery Option then browse till directory and select .img file
4]Done! You Have TWRP installed With Every Feature working :good:
*IF YOU FACE ANY PROBLEM POST COMMENT OR PM ME:fingers-crossed:
THANKS XDA Developers
CREDITS
[email protected] [[email protected],8059148448]
@@[email protected]@
TWRP Toolkit PC :- [Mirror]Google Drive
TWRP Image File:-[Mirror]Google Drive
Upcoming Threads:- [Xposed]Lyf Earth-1
#####DO HIT THANKS BUTTON IF I HELPED#####
Click to expand...
Click to collapse
Hi dear
Thanks for the work. I am not able to put my phone in fastboot mode. When ever I pressed the button combo as suggested by you, the phone goes in factory testing mode.
Kindly help
ankjain said:
Hi dear
Thanks for the work. I am not able to put my phone in fastboot mode. When ever I pressed the button combo as suggested by you, the phone goes in factory testing mode.
Kindly help
Click to expand...
Click to collapse
Actually i guessed the combination as i dont have the device
Try These
Vol Down+power
Volup+Power
The Three buttons together
rom
Sir, can u port some rom for this device?
Sanjitsarkar said:
Sir, can u port some rom for this device?
Click to expand...
Click to collapse
Yes Brother but can't do it now i m a kittle bit buay now a days !! But soon will
Gautam Maini said:
Yes Brother but can't do it now i m a kittle bit buay now a days !! But soon will
Click to expand...
Click to collapse
Thanks sir. We r waiting.
Please make twrp for Lyf wind 7 (Ls 5016)
Please make twrp for Lyf wind 7 also (ls 5016)
I need a custom recovery for my device Micromax Q491 (Canvas amaze 4g),
I have no idea about this
Can you please create a custom recovery for my device....
I would be thankful to you
Need Some Testers For Earth-1 PM me Or Telegram me ASAP
Nis882 said:
I need a custom recovery for my device Micromax Q491 (Canvas amaze 4g),
I have no idea about this
Can you please create a custom recovery for my device....
I would be thankful to you
Click to expand...
Click to collapse
Yes i can. PM me on tele or on xda
Gautam Maini said:
Hello Guys!
This Is TWRP Recovery for Lyf Earth-1 Aka LS-5501
Pre-Req:-
1].Charging must Be At Min. 30%
2].Phone must be rooted For Non-PC Installation
####Installation Steps####
Steps For Installation From PC
1]. Download and Extract The Zip
2].Boot Ur Device into Fastboot mode By pressing Vol.Down and Power Simultaniously until White Screen With Android written on it appears [Note make Sure u have USB debugging Enabled]
3] Run Start.bat And select Option 1 then connect ur device.
4]Reboot And Done U have TWRP recovery installed :good:
####Steps for Without PC####[Root Required]
1] Download Flashify App from Play Store
2]Place Recovery.img in Internal Storage
3]Open App And Select Flash Recovery Option then browse till directory and select .img file
4]Done! You Have TWRP installed With Every Feature working :good:
*IF YOU FACE ANY PROBLEM POST COMMENT OR PM ME:fingers-crossed:
THANKS XDA Developers
CREDITS
Gautam Maini
@@[email protected]@
TWRP Toolkit PC :- [Mirror]Google Drive
TWRP Image File:-[Mirror]Google Drive
Upcoming Threads:- [Xposed]Lyf Earth-1
#####DO HIT THANKS BUTTON IF I HELPED#####
Click to expand...
Click to collapse
I need Access to Download it? Why?
Vatsal2op Productions said:
I need Access to Download it? Why?
Click to expand...
Click to collapse
Links Got Old and Google Drive's Policy Did this, I have granted access to you in check email . Though Open Links are updated in thread also . Sorry for inconvenience . Enjoy
Gautam Maini said:
Links Got Old and Google Drive's Policy Did this, I have granted access to you in check email . Though Open Links are updated in thread also . Sorry for inconvenience . Enjoy
Click to expand...
Click to collapse
Hi, I Have LYF Earth 2 Actually, And The reason I need a Custom recovery for it is, that I need to completely erase the system files, Why? Because a Few days Back, I Successfully Rooted my LYF Earth 2, And Applied a 512 Frames (20 seconds) Bootanimtion! But till I realized That I Applied a 20-second Bootanimation which was not compatible with my device, My Phone switched off (low battery) Now I knew what was gonna happen, It's now stuck on Bootloop, and Doesn't start because the Custom boot animation was way too heavy for my devices to handle, I tried Hard-resetting it, But Still the Custom boot animation doesn't Go Away!! Can Anyone PLEASE help me with this?? D: I Just Don't Want to Lose That phone forever,
Vatsal2op Productions said:
Hi, I Have LYF Earth 2 Actually, And The reason I need a Custom recovery for it is, that I need to completely erase the system files, Why? Because a Few days Back, I Successfully Rooted my LYF Earth 2, And Applied a 512 Frames (20 seconds) Bootanimtion! But till I realized That I Applied a 20-second Bootanimation which was not compatible with my device, My Phone switched off (low battery) Now I knew what was gonna happen, It's now stuck on Bootloop, and Doesn't start because the Custom boot animation was way too heavy for my devices to handle, I tried Hard-resetting it, But Still the Custom boot animation doesn't Go Away!! Can Anyone PLEASE help me with this?? D: I Just Don't Want to Lose That phone forever,
Click to expand...
Click to collapse
Well , Download Access was provided to you in your email , feel free to try this on your device
Gautam Maini said:
Well , Download Access was provided to you in your email , feel free to try this on your device
Click to expand...
Click to collapse
I Would Do It, But Can't Unlock the Bootloader of it, Ot always shows an error! But the Phone is rooted and Just stuck in bootloop as I Said why.. Anything Else I Can Try?
Vatsal2op Productions said:
I Would Do It, But Can't Unlock the Bootloader of it, Ot always shows an error! But the Phone is rooted and Just stuck in bootloop as I Said why.. Anything Else I Can Try?
Click to expand...
Click to collapse
Why don't you flash the stock rom first , and then perform the rooting procedures again
Gautam Maini said:
Why don't you flash the stock rom first , and then perform the rooting procedures again
Click to expand...
Click to collapse
Can I Flash the Stock Rom without Unlocking The Bootloader?! If Yes, Then Can you Please give me the Stock ROM of LYF Earth 2? Because I Can't Find it Anywhere!!
And One thing can Easily solve the problem, Just get my Phone Unrooted, So that That the Bootanimation can go away which is preventing the Phone from Booting up!
Vatsal2op Productions said:
Can I Flash the Stock Rom without Unlocking The Bootloader?! If Yes, Then Can you Please give me the Stock ROM of LYF Earth 2? Because I Can't Find it Anywhere!!
Click to expand...
Click to collapse
Here You go :
Firmware: Lyf Earth 2 Stock ROM Link
For Tutorials , Look for any LYF device's flashing procedures on YouTube .
Gautam Maini said:
Here You go :
Firmware: Lyf Earth 2 Stock ROM Link
For Tutorials , Look for any LYF device's flashing procedures on YouTube .
Click to expand...
Click to collapse
That's so Kind of You for Sharing this, But can I Flash it without unlocking the Bootloader...?
Do I Need to Unlock the Bootloader? Because My phone's bootloader is locked..